2 files changed, 26 insertions, 2 deletions

diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 7a31db01b6fe..65fa532bb4ac 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -104,9 +104,9 @@ static struct spi_board_info ek_spi_devices[] = {
         },
 #endif
 #endif
-#if defined(CONFIG_SND_AT73C213)
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
         {       /* AT73C213 DAC */
-                .modalias       = "snd_at73c213",
+                .modalias       = "at73c213",
                 .chip_select    = 0,
                 .max_speed_hz   = 10 * 1000 * 1000,
                 .bus_num        = 1,
@@ -188,6 +188,8 @@ static void __init ek_board_init(void)
         at91_add_device_eth(&ek_macb_data);
         /* MMC */
         at91_add_device_mmc(0, &ek_mmc_data);
+        /* I2C */
+        at91_add_device_i2c();
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 81d3d6a0a86a..f57458559fb6 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -157,6 +157,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 
 
 /*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+        .is_rmii        = 1,
+};
+
+
+/*
  * NAND flash
  */
 static struct mtd_partition __initdata ek_nand_partition[] = {
@@ -193,6 +201,14 @@ static struct at91_nand_data __initdata ek_nand_data = {
 };
 
 
+/*
+ * AC97
+ */
+static struct atmel_ac97_data ek_ac97_data = {
+        .reset_pin      = AT91_PIN_PA13,
+};
+
+
 static void __init ek_board_init(void)
 {
         /* Serial */
@@ -208,8 +224,14 @@ static void __init ek_board_init(void)
         ek_add_device_ts();
         /* MMC */
         at91_add_device_mmc(1, &ek_mmc_data);
+        /* Ethernet */
+        at91_add_device_eth(&ek_macb_data);
         /* NAND */
         at91_add_device_nand(&ek_nand_data);
+        /* I2C */
+        at91_add_device_i2c();
+        /* AC97 */
+        at91_add_device_ac97(&ek_ac97_data);
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")