diff options
-rw-r--r-- | arch/x86/kernel/Makefile | 2 | ||||
-rw-r--r-- | arch/x86/kernel/acpi/boot.c | 70 | ||||
-rw-r--r-- | arch/x86/kernel/mmconf-fam10h_64.c | 243 | ||||
-rw-r--r-- | arch/x86/kernel/setup_64.c | 20 | ||||
-rw-r--r-- | arch/x86/mm/k8topology_64.c | 38 | ||||
-rw-r--r-- | arch/x86/pci/Makefile_32 | 1 | ||||
-rw-r--r-- | arch/x86/pci/Makefile_64 | 2 | ||||
-rw-r--r-- | arch/x86/pci/acpi.c | 27 | ||||
-rw-r--r-- | arch/x86/pci/common.c | 22 | ||||
-rw-r--r-- | arch/x86/pci/direct.c | 8 | ||||
-rw-r--r-- | arch/x86/pci/fixup.c | 17 | ||||
-rw-r--r-- | arch/x86/pci/init.c | 14 | ||||
-rw-r--r-- | arch/x86/pci/irq.c | 4 | ||||
-rw-r--r-- | arch/x86/pci/k8-bus_64.c | 575 | ||||
-rw-r--r-- | arch/x86/pci/legacy.c | 4 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig-shared.c | 247 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig_32.c | 4 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig_64.c | 22 | ||||
-rw-r--r-- | arch/x86/pci/mp_bus_to_node.c | 23 | ||||
-rw-r--r-- | arch/x86/pci/pci.h | 3 | ||||
-rw-r--r-- | drivers/acpi/bus.c | 2 | ||||
-rw-r--r-- | drivers/base/core.c | 14 | ||||
-rw-r--r-- | drivers/pci/probe.c | 21 | ||||
-rw-r--r-- | include/asm-x86/pci.h | 2 | ||||
-rw-r--r-- | include/asm-x86/topology.h | 16 | ||||
-rw-r--r-- | include/linux/acpi.h | 5 | ||||
-rw-r--r-- | include/linux/pci.h | 11 |
27 files changed, 1285 insertions, 132 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 350eb1b2a208..30d54ed27e55 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile | |||
@@ -103,4 +103,6 @@ ifeq ($(CONFIG_X86_64),y) | |||
103 | obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o | 103 | obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o |
104 | obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o | 104 | obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o |
105 | obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o | 105 | obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o |
106 | |||
107 | obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o | ||
106 | endif | 108 | endif |
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 977ed5cdeaa3..c49ebcc6c41e 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c | |||
@@ -771,6 +771,32 @@ static void __init acpi_register_lapic_address(unsigned long address) | |||
771 | boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); | 771 | boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); |
772 | } | 772 | } |
773 | 773 | ||
774 | static int __init early_acpi_parse_madt_lapic_addr_ovr(void) | ||
775 | { | ||
776 | int count; | ||
777 | |||
778 | if (!cpu_has_apic) | ||
779 | return -ENODEV; | ||
780 | |||
781 | /* | ||
782 | * Note that the LAPIC address is obtained from the MADT (32-bit value) | ||
783 | * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). | ||
784 | */ | ||
785 | |||
786 | count = | ||
787 | acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, | ||
788 | acpi_parse_lapic_addr_ovr, 0); | ||
789 | if (count < 0) { | ||
790 | printk(KERN_ERR PREFIX | ||
791 | "Error parsing LAPIC address override entry\n"); | ||
792 | return count; | ||
793 | } | ||
794 | |||
795 | acpi_register_lapic_address(acpi_lapic_addr); | ||
796 | |||
797 | return count; | ||
798 | } | ||
799 | |||
774 | static int __init acpi_parse_madt_lapic_entries(void) | 800 | static int __init acpi_parse_madt_lapic_entries(void) |
775 | { | 801 | { |
776 | int count; | 802 | int count; |
@@ -901,6 +927,33 @@ static inline int acpi_parse_madt_ioapic_entries(void) | |||
901 | } | 927 | } |
902 | #endif /* !CONFIG_X86_IO_APIC */ | 928 | #endif /* !CONFIG_X86_IO_APIC */ |
903 | 929 | ||
930 | static void __init early_acpi_process_madt(void) | ||
931 | { | ||
932 | #ifdef CONFIG_X86_LOCAL_APIC | ||
933 | int error; | ||
934 | |||
935 | if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { | ||
936 | |||
937 | /* | ||
938 | * Parse MADT LAPIC entries | ||
939 | */ | ||
940 | error = early_acpi_parse_madt_lapic_addr_ovr(); | ||
941 | if (!error) { | ||
942 | acpi_lapic = 1; | ||
943 | smp_found_config = 1; | ||
944 | } | ||
945 | if (error == -EINVAL) { | ||
946 | /* | ||
947 | * Dell Precision Workstation 410, 610 come here. | ||
948 | */ | ||
949 | printk(KERN_ERR PREFIX | ||
950 | "Invalid BIOS MADT, disabling ACPI\n"); | ||
951 | disable_acpi(); | ||
952 | } | ||
953 | } | ||
954 | #endif | ||
955 | } | ||
956 | |||
904 | static void __init acpi_process_madt(void) | 957 | static void __init acpi_process_madt(void) |
905 | { | 958 | { |
906 | #ifdef CONFIG_X86_LOCAL_APIC | 959 | #ifdef CONFIG_X86_LOCAL_APIC |
@@ -1233,6 +1286,23 @@ int __init acpi_boot_table_init(void) | |||
1233 | return 0; | 1286 | return 0; |
1234 | } | 1287 | } |
1235 | 1288 | ||
1289 | int __init early_acpi_boot_init(void) | ||
1290 | { | ||
1291 | /* | ||
1292 | * If acpi_disabled, bail out | ||
1293 | * One exception: acpi=ht continues far enough to enumerate LAPICs | ||
1294 | */ | ||
1295 | if (acpi_disabled && !acpi_ht) | ||
1296 | return 1; | ||
1297 | |||
1298 | /* | ||
1299 | * Process the Multiple APIC Description Table (MADT), if present | ||
1300 | */ | ||
1301 | early_acpi_process_madt(); | ||
1302 | |||
1303 | return 0; | ||
1304 | } | ||
1305 | |||
1236 | int __init acpi_boot_init(void) | 1306 | int __init acpi_boot_init(void) |
1237 | { | 1307 | { |
1238 | /* | 1308 | /* |
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c new file mode 100644 index 000000000000..edc5fbfe85c0 --- /dev/null +++ b/arch/x86/kernel/mmconf-fam10h_64.c | |||
@@ -0,0 +1,243 @@ | |||
1 | /* | ||
2 | * AMD Family 10h mmconfig enablement | ||
3 | */ | ||
4 | |||
5 | #include <linux/types.h> | ||
6 | #include <linux/mm.h> | ||
7 | #include <linux/string.h> | ||
8 | #include <linux/pci.h> | ||
9 | #include <linux/dmi.h> | ||
10 | #include <asm/pci-direct.h> | ||
11 | #include <linux/sort.h> | ||
12 | #include <asm/io.h> | ||
13 | #include <asm/msr.h> | ||
14 | #include <asm/acpi.h> | ||
15 | |||
16 | #include "../pci/pci.h" | ||
17 | |||
18 | struct pci_hostbridge_probe { | ||
19 | u32 bus; | ||
20 | u32 slot; | ||
21 | u32 vendor; | ||
22 | u32 device; | ||
23 | }; | ||
24 | |||
25 | static u64 __cpuinitdata fam10h_pci_mmconf_base; | ||
26 | static int __cpuinitdata fam10h_pci_mmconf_base_status; | ||
27 | |||
28 | static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { | ||
29 | { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, | ||
30 | { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, | ||
31 | }; | ||
32 | |||
33 | struct range { | ||
34 | u64 start; | ||
35 | u64 end; | ||
36 | }; | ||
37 | |||
38 | static int __cpuinit cmp_range(const void *x1, const void *x2) | ||
39 | { | ||
40 | const struct range *r1 = x1; | ||
41 | const struct range *r2 = x2; | ||
42 | int start1, start2; | ||
43 | |||
44 | start1 = r1->start >> 32; | ||
45 | start2 = r2->start >> 32; | ||
46 | |||
47 | return start1 - start2; | ||
48 | } | ||
49 | |||
50 | /*[47:0] */ | ||
51 | /* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ | ||
52 | #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) | ||
53 | #define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) | ||
54 | static void __cpuinit get_fam10h_pci_mmconf_base(void) | ||
55 | { | ||
56 | int i; | ||
57 | unsigned bus; | ||
58 | unsigned slot; | ||
59 | int found; | ||
60 | |||
61 | u64 val; | ||
62 | u32 address; | ||
63 | u64 tom2; | ||
64 | u64 base = FAM10H_PCI_MMCONF_BASE; | ||
65 | |||
66 | int hi_mmio_num; | ||
67 | struct range range[8]; | ||
68 | |||
69 | /* only try to get setting from BSP */ | ||
70 | /* -1 or 1 */ | ||
71 | if (fam10h_pci_mmconf_base_status) | ||
72 | return; | ||
73 | |||
74 | if (!early_pci_allowed()) | ||
75 | goto fail; | ||
76 | |||
77 | found = 0; | ||
78 | for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { | ||
79 | u32 id; | ||
80 | u16 device; | ||
81 | u16 vendor; | ||
82 | |||
83 | bus = pci_probes[i].bus; | ||
84 | slot = pci_probes[i].slot; | ||
85 | id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); | ||
86 | |||
87 | vendor = id & 0xffff; | ||
88 | device = (id>>16) & 0xffff; | ||
89 | if (pci_probes[i].vendor == vendor && | ||
90 | pci_probes[i].device == device) { | ||
91 | found = 1; | ||
92 | break; | ||
93 | } | ||
94 | } | ||
95 | |||
96 | if (!found) | ||
97 | goto fail; | ||
98 | |||
99 | /* SYS_CFG */ | ||
100 | address = MSR_K8_SYSCFG; | ||
101 | rdmsrl(address, val); | ||
102 | |||
103 | /* TOP_MEM2 is not enabled? */ | ||
104 | if (!(val & (1<<21))) { | ||
105 | tom2 = 0; | ||
106 | } else { | ||
107 | /* TOP_MEM2 */ | ||
108 | address = MSR_K8_TOP_MEM2; | ||
109 | rdmsrl(address, val); | ||
110 | tom2 = val & (0xffffULL<<32); | ||
111 | } | ||
112 | |||
113 | if (base <= tom2) | ||
114 | base = tom2 + (1ULL<<32); | ||
115 | |||
116 | /* | ||
117 | * need to check if the range is in the high mmio range that is | ||
118 | * above 4G | ||
119 | */ | ||
120 | hi_mmio_num = 0; | ||
121 | for (i = 0; i < 8; i++) { | ||
122 | u32 reg; | ||
123 | u64 start; | ||
124 | u64 end; | ||
125 | reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); | ||
126 | if (!(reg & 3)) | ||
127 | continue; | ||
128 | |||
129 | start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ | ||
130 | reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); | ||
131 | end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ | ||
132 | |||
133 | if (!end) | ||
134 | continue; | ||
135 | |||
136 | range[hi_mmio_num].start = start; | ||
137 | range[hi_mmio_num].end = end; | ||
138 | hi_mmio_num++; | ||
139 | } | ||
140 | |||
141 | if (!hi_mmio_num) | ||
142 | goto out; | ||
143 | |||
144 | /* sort the range */ | ||
145 | sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL); | ||
146 | |||
147 | if (range[hi_mmio_num - 1].end < base) | ||
148 | goto out; | ||
149 | if (range[0].start > base) | ||
150 | goto out; | ||
151 | |||
152 | /* need to find one window */ | ||
153 | base = range[0].start - (1ULL << 32); | ||
154 | if ((base > tom2) && BASE_VALID(base)) | ||
155 | goto out; | ||
156 | base = range[hi_mmio_num - 1].end + (1ULL << 32); | ||
157 | if ((base > tom2) && BASE_VALID(base)) | ||
158 | goto out; | ||
159 | /* need to find window between ranges */ | ||
160 | if (hi_mmio_num > 1) | ||
161 | for (i = 0; i < hi_mmio_num - 1; i++) { | ||
162 | if (range[i + 1].start > (range[i].end + (1ULL << 32))) { | ||
163 | base = range[i].end + (1ULL << 32); | ||
164 | if ((base > tom2) && BASE_VALID(base)) | ||
165 | goto out; | ||
166 | } | ||
167 | } | ||
168 | |||
169 | fail: | ||
170 | fam10h_pci_mmconf_base_status = -1; | ||
171 | return; | ||
172 | out: | ||
173 | fam10h_pci_mmconf_base = base; | ||
174 | fam10h_pci_mmconf_base_status = 1; | ||
175 | } | ||
176 | |||
177 | void __cpuinit fam10h_check_enable_mmcfg(void) | ||
178 | { | ||
179 | u64 val; | ||
180 | u32 address; | ||
181 | |||
182 | if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) | ||
183 | return; | ||
184 | |||
185 | address = MSR_FAM10H_MMIO_CONF_BASE; | ||
186 | rdmsrl(address, val); | ||
187 | |||
188 | /* try to make sure that AP's setting is identical to BSP setting */ | ||
189 | if (val & FAM10H_MMIO_CONF_ENABLE) { | ||
190 | unsigned busnbits; | ||
191 | busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & | ||
192 | FAM10H_MMIO_CONF_BUSRANGE_MASK; | ||
193 | |||
194 | /* only trust the one handle 256 buses, if acpi=off */ | ||
195 | if (!acpi_pci_disabled || busnbits >= 8) { | ||
196 | u64 base; | ||
197 | base = val & (0xffffULL << 32); | ||
198 | if (fam10h_pci_mmconf_base_status <= 0) { | ||
199 | fam10h_pci_mmconf_base = base; | ||
200 | fam10h_pci_mmconf_base_status = 1; | ||
201 | return; | ||
202 | } else if (fam10h_pci_mmconf_base == base) | ||
203 | return; | ||
204 | } | ||
205 | } | ||
206 | |||
207 | /* | ||
208 | * if it is not enabled, try to enable it and assume only one segment | ||
209 | * with 256 buses | ||
210 | */ | ||
211 | get_fam10h_pci_mmconf_base(); | ||
212 | if (fam10h_pci_mmconf_base_status <= 0) | ||
213 | return; | ||
214 | |||
215 | printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); | ||
216 | val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) | | ||
217 | (FAM10H_MMIO_CONF_BUSRANGE_MASK<<FAM10H_MMIO_CONF_BUSRANGE_SHIFT)); | ||
218 | val |= fam10h_pci_mmconf_base | (8 << FAM10H_MMIO_CONF_BUSRANGE_SHIFT) | | ||
219 | FAM10H_MMIO_CONF_ENABLE; | ||
220 | wrmsrl(address, val); | ||
221 | } | ||
222 | |||
223 | static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d) | ||
224 | { | ||
225 | pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; | ||
226 | return 0; | ||
227 | } | ||
228 | |||
229 | static struct dmi_system_id __devinitdata mmconf_dmi_table[] = { | ||
230 | { | ||
231 | .callback = set_check_enable_amd_mmconf, | ||
232 | .ident = "Sun Microsystems Machine", | ||
233 | .matches = { | ||
234 | DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"), | ||
235 | }, | ||
236 | }, | ||
237 | {} | ||
238 | }; | ||
239 | |||
240 | void __init check_enable_amd_mmconf_dmi(void) | ||
241 | { | ||
242 | dmi_check_system(mmconf_dmi_table); | ||
243 | } | ||
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index a94fb959a87a..22c14e21c97c 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c | |||
@@ -29,6 +29,7 @@ | |||
29 | #include <linux/crash_dump.h> | 29 | #include <linux/crash_dump.h> |
30 | #include <linux/root_dev.h> | 30 | #include <linux/root_dev.h> |
31 | #include <linux/pci.h> | 31 | #include <linux/pci.h> |
32 | #include <asm/pci-direct.h> | ||
32 | #include <linux/efi.h> | 33 | #include <linux/efi.h> |
33 | #include <linux/acpi.h> | 34 | #include <linux/acpi.h> |
34 | #include <linux/kallsyms.h> | 35 | #include <linux/kallsyms.h> |
@@ -40,6 +41,7 @@ | |||
40 | #include <linux/dmi.h> | 41 | #include <linux/dmi.h> |
41 | #include <linux/dma-mapping.h> | 42 | #include <linux/dma-mapping.h> |
42 | #include <linux/ctype.h> | 43 | #include <linux/ctype.h> |
44 | #include <linux/sort.h> | ||
43 | #include <linux/uaccess.h> | 45 | #include <linux/uaccess.h> |
44 | #include <linux/init_ohci1394_dma.h> | 46 | #include <linux/init_ohci1394_dma.h> |
45 | #include <linux/kvm_para.h> | 47 | #include <linux/kvm_para.h> |
@@ -288,6 +290,18 @@ static void __init parse_setup_data(void) | |||
288 | } | 290 | } |
289 | } | 291 | } |
290 | 292 | ||
293 | #ifdef CONFIG_PCI_MMCONFIG | ||
294 | extern void __cpuinit fam10h_check_enable_mmcfg(void); | ||
295 | extern void __init check_enable_amd_mmconf_dmi(void); | ||
296 | #else | ||
297 | void __cpuinit fam10h_check_enable_mmcfg(void) | ||
298 | { | ||
299 | } | ||
300 | void __init check_enable_amd_mmconf_dmi(void) | ||
301 | { | ||
302 | } | ||
303 | #endif | ||
304 | |||
291 | /* | 305 | /* |
292 | * setup_arch - architecture-specific boot-time initializations | 306 | * setup_arch - architecture-specific boot-time initializations |
293 | * | 307 | * |
@@ -515,6 +529,9 @@ void __init setup_arch(char **cmdline_p) | |||
515 | conswitchp = &dummy_con; | 529 | conswitchp = &dummy_con; |
516 | #endif | 530 | #endif |
517 | #endif | 531 | #endif |
532 | |||
533 | /* do this before identify_cpu for boot cpu */ | ||
534 | check_enable_amd_mmconf_dmi(); | ||
518 | } | 535 | } |
519 | 536 | ||
520 | static int __cpuinit get_model_name(struct cpuinfo_x86 *c) | 537 | static int __cpuinit get_model_name(struct cpuinfo_x86 *c) |
@@ -767,6 +784,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) | |||
767 | /* MFENCE stops RDTSC speculation */ | 784 | /* MFENCE stops RDTSC speculation */ |
768 | set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); | 785 | set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); |
769 | 786 | ||
787 | if (c->x86 == 0x10) | ||
788 | fam10h_check_enable_mmcfg(); | ||
789 | |||
770 | if (amd_apic_timer_broken()) | 790 | if (amd_apic_timer_broken()) |
771 | disable_apic_timer = 1; | 791 | disable_apic_timer = 1; |
772 | 792 | ||
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 86808e666f9c..1f476e477844 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c | |||
@@ -13,12 +13,15 @@ | |||
13 | #include <linux/nodemask.h> | 13 | #include <linux/nodemask.h> |
14 | #include <asm/io.h> | 14 | #include <asm/io.h> |
15 | #include <linux/pci_ids.h> | 15 | #include <linux/pci_ids.h> |
16 | #include <linux/acpi.h> | ||
16 | #include <asm/types.h> | 17 | #include <asm/types.h> |
17 | #include <asm/mmzone.h> | 18 | #include <asm/mmzone.h> |
18 | #include <asm/proto.h> | 19 | #include <asm/proto.h> |
19 | #include <asm/e820.h> | 20 | #include <asm/e820.h> |
20 | #include <asm/pci-direct.h> | 21 | #include <asm/pci-direct.h> |
21 | #include <asm/numa.h> | 22 | #include <asm/numa.h> |
23 | #include <asm/mpspec.h> | ||
24 | #include <asm/apic.h> | ||
22 | 25 | ||
23 | static __init int find_northbridge(void) | 26 | static __init int find_northbridge(void) |
24 | { | 27 | { |
@@ -44,6 +47,30 @@ static __init int find_northbridge(void) | |||
44 | return -1; | 47 | return -1; |
45 | } | 48 | } |
46 | 49 | ||
50 | static __init void early_get_boot_cpu_id(void) | ||
51 | { | ||
52 | /* | ||
53 | * need to get boot_cpu_id so can use that to create apicid_to_node | ||
54 | * in k8_scan_nodes() | ||
55 | */ | ||
56 | /* | ||
57 | * Find possible boot-time SMP configuration: | ||
58 | */ | ||
59 | early_find_smp_config(); | ||
60 | #ifdef CONFIG_ACPI | ||
61 | /* | ||
62 | * Read APIC information from ACPI tables. | ||
63 | */ | ||
64 | early_acpi_boot_init(); | ||
65 | #endif | ||
66 | /* | ||
67 | * get boot-time SMP configuration: | ||
68 | */ | ||
69 | if (smp_found_config) | ||
70 | early_get_smp_config(); | ||
71 | early_init_lapic_mapping(); | ||
72 | } | ||
73 | |||
47 | int __init k8_scan_nodes(unsigned long start, unsigned long end) | 74 | int __init k8_scan_nodes(unsigned long start, unsigned long end) |
48 | { | 75 | { |
49 | unsigned long prevbase; | 76 | unsigned long prevbase; |
@@ -56,6 +83,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) | |||
56 | unsigned cores; | 83 | unsigned cores; |
57 | unsigned bits; | 84 | unsigned bits; |
58 | int j; | 85 | int j; |
86 | unsigned apicid_base; | ||
59 | 87 | ||
60 | if (!early_pci_allowed()) | 88 | if (!early_pci_allowed()) |
61 | return -1; | 89 | return -1; |
@@ -174,11 +202,19 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) | |||
174 | /* use the coreid bits from early_identify_cpu */ | 202 | /* use the coreid bits from early_identify_cpu */ |
175 | bits = boot_cpu_data.x86_coreid_bits; | 203 | bits = boot_cpu_data.x86_coreid_bits; |
176 | cores = (1<<bits); | 204 | cores = (1<<bits); |
205 | apicid_base = 0; | ||
206 | /* need to get boot_cpu_id early for system with apicid lifting */ | ||
207 | early_get_boot_cpu_id(); | ||
208 | if (boot_cpu_physical_apicid > 0) { | ||
209 | printk(KERN_INFO "BSP APIC ID: %02x\n", | ||
210 | boot_cpu_physical_apicid); | ||
211 | apicid_base = boot_cpu_physical_apicid; | ||
212 | } | ||
177 | 213 | ||
178 | for (i = 0; i < 8; i++) { | 214 | for (i = 0; i < 8; i++) { |
179 | if (nodes[i].start != nodes[i].end) { | 215 | if (nodes[i].start != nodes[i].end) { |
180 | nodeid = nodeids[i]; | 216 | nodeid = nodeids[i]; |
181 | for (j = 0; j < cores; j++) | 217 | for (j = apicid_base; j < cores + apicid_base; j++) |
182 | apicid_to_node[(nodeid << bits) + j] = i; | 218 | apicid_to_node[(nodeid << bits) + j] = i; |
183 | setup_node_bootmem(i, nodes[i].start, nodes[i].end); | 219 | setup_node_bootmem(i, nodes[i].start, nodes[i].end); |
184 | } | 220 | } |
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index b859047a6376..2a1516efb542 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 | |||
@@ -11,5 +11,6 @@ pci-y += legacy.o irq.o | |||
11 | 11 | ||
12 | pci-$(CONFIG_X86_VISWS) := visws.o fixup.o | 12 | pci-$(CONFIG_X86_VISWS) := visws.o fixup.o |
13 | pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o | 13 | pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o |
14 | pci-$(CONFIG_NUMA) += mp_bus_to_node.o | ||
14 | 15 | ||
15 | obj-y += $(pci-y) common.o early.o | 16 | obj-y += $(pci-y) common.o early.o |
diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64 index 7d8c467bf143..8fbd19832cf6 100644 --- a/arch/x86/pci/Makefile_64 +++ b/arch/x86/pci/Makefile_64 | |||
@@ -13,5 +13,5 @@ obj-y += legacy.o irq.o common.o early.o | |||
13 | # mmconfig has a 64bit special | 13 | # mmconfig has a 64bit special |
14 | obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o | 14 | obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o |
15 | 15 | ||
16 | obj-$(CONFIG_NUMA) += k8-bus_64.o | 16 | obj-y += k8-bus_64.o |
17 | 17 | ||
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 2664cb3fc96c..1a9c0c6a1a18 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c | |||
@@ -191,7 +191,10 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do | |||
191 | { | 191 | { |
192 | struct pci_bus *bus; | 192 | struct pci_bus *bus; |
193 | struct pci_sysdata *sd; | 193 | struct pci_sysdata *sd; |
194 | int node; | ||
195 | #ifdef CONFIG_ACPI_NUMA | ||
194 | int pxm; | 196 | int pxm; |
197 | #endif | ||
195 | 198 | ||
196 | dmi_check_system(acpi_pciprobe_dmi_table); | 199 | dmi_check_system(acpi_pciprobe_dmi_table); |
197 | 200 | ||
@@ -201,6 +204,17 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do | |||
201 | return NULL; | 204 | return NULL; |
202 | } | 205 | } |
203 | 206 | ||
207 | node = -1; | ||
208 | #ifdef CONFIG_ACPI_NUMA | ||
209 | pxm = acpi_get_pxm(device->handle); | ||
210 | if (pxm >= 0) | ||
211 | node = pxm_to_node(pxm); | ||
212 | if (node != -1) | ||
213 | set_mp_bus_to_node(busnum, node); | ||
214 | else | ||
215 | node = get_mp_bus_to_node(busnum); | ||
216 | #endif | ||
217 | |||
204 | /* Allocate per-root-bus (not per bus) arch-specific data. | 218 | /* Allocate per-root-bus (not per bus) arch-specific data. |
205 | * TODO: leak; this memory is never freed. | 219 | * TODO: leak; this memory is never freed. |
206 | * It's arguable whether it's worth the trouble to care. | 220 | * It's arguable whether it's worth the trouble to care. |
@@ -212,13 +226,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do | |||
212 | } | 226 | } |
213 | 227 | ||
214 | sd->domain = domain; | 228 | sd->domain = domain; |
215 | sd->node = -1; | 229 | sd->node = node; |
216 | |||
217 | pxm = acpi_get_pxm(device->handle); | ||
218 | #ifdef CONFIG_ACPI_NUMA | ||
219 | if (pxm >= 0) | ||
220 | sd->node = pxm_to_node(pxm); | ||
221 | #endif | ||
222 | /* | 230 | /* |
223 | * Maybe the desired pci bus has been already scanned. In such case | 231 | * Maybe the desired pci bus has been already scanned. In such case |
224 | * it is unnecessary to scan the pci bus with the given domain,busnum. | 232 | * it is unnecessary to scan the pci bus with the given domain,busnum. |
@@ -238,9 +246,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do | |||
238 | kfree(sd); | 246 | kfree(sd); |
239 | 247 | ||
240 | #ifdef CONFIG_ACPI_NUMA | 248 | #ifdef CONFIG_ACPI_NUMA |
241 | if (bus != NULL) { | 249 | if (bus) { |
242 | if (pxm >= 0) { | 250 | if (pxm >= 0) { |
243 | printk("bus %d -> pxm %d -> node %d\n", | 251 | printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", |
244 | busnum, pxm, pxm_to_node(pxm)); | 252 | busnum, pxm, pxm_to_node(pxm)); |
245 | } | 253 | } |
246 | } | 254 | } |
@@ -248,7 +256,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do | |||
248 | 256 | ||
249 | if (bus && (pci_probe & PCI_USE__CRS)) | 257 | if (bus && (pci_probe & PCI_USE__CRS)) |
250 | get_current_resources(device, busnum, domain, bus); | 258 | get_current_resources(device, busnum, domain, bus); |
251 | |||
252 | return bus; | 259 | return bus; |
253 | } | 260 | } |
254 | 261 | ||
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 75fcc29ecf52..2a4d751818b7 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c | |||
@@ -342,9 +342,14 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) | |||
342 | return NULL; | 342 | return NULL; |
343 | } | 343 | } |
344 | 344 | ||
345 | sd->node = get_mp_bus_to_node(busnum); | ||
346 | |||
345 | printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); | 347 | printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); |
348 | bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); | ||
349 | if (!bus) | ||
350 | kfree(sd); | ||
346 | 351 | ||
347 | return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); | 352 | return bus; |
348 | } | 353 | } |
349 | 354 | ||
350 | extern u8 pci_cache_line_size; | 355 | extern u8 pci_cache_line_size; |
@@ -420,6 +425,10 @@ char * __devinit pcibios_setup(char *str) | |||
420 | pci_probe &= ~PCI_PROBE_MMCONF; | 425 | pci_probe &= ~PCI_PROBE_MMCONF; |
421 | return NULL; | 426 | return NULL; |
422 | } | 427 | } |
428 | else if (!strcmp(str, "check_enable_amd_mmconf")) { | ||
429 | pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; | ||
430 | return NULL; | ||
431 | } | ||
423 | #endif | 432 | #endif |
424 | else if (!strcmp(str, "noacpi")) { | 433 | else if (!strcmp(str, "noacpi")) { |
425 | acpi_noirq_set(); | 434 | acpi_noirq_set(); |
@@ -480,7 +489,7 @@ void pcibios_disable_device (struct pci_dev *dev) | |||
480 | pcibios_disable_irq(dev); | 489 | pcibios_disable_irq(dev); |
481 | } | 490 | } |
482 | 491 | ||
483 | struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno) | 492 | struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) |
484 | { | 493 | { |
485 | struct pci_bus *bus = NULL; | 494 | struct pci_bus *bus = NULL; |
486 | struct pci_sysdata *sd; | 495 | struct pci_sysdata *sd; |
@@ -495,10 +504,15 @@ struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno) | |||
495 | printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); | 504 | printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); |
496 | return NULL; | 505 | return NULL; |
497 | } | 506 | } |
498 | sd->node = -1; | 507 | sd->node = node; |
499 | bus = pci_scan_bus(busno, &pci_root_ops, sd); | 508 | bus = pci_scan_bus(busno, ops, sd); |
500 | if (!bus) | 509 | if (!bus) |
501 | kfree(sd); | 510 | kfree(sd); |
502 | 511 | ||
503 | return bus; | 512 | return bus; |
504 | } | 513 | } |
514 | |||
515 | struct pci_bus *pci_scan_bus_with_sysdata(int busno) | ||
516 | { | ||
517 | return pci_scan_bus_on_node(busno, &pci_root_ops, -1); | ||
518 | } | ||
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 42f3e4cad179..21d1e0e0d535 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c | |||
@@ -258,7 +258,8 @@ void __init pci_direct_init(int type) | |||
258 | { | 258 | { |
259 | if (type == 0) | 259 | if (type == 0) |
260 | return; | 260 | return; |
261 | printk(KERN_INFO "PCI: Using configuration type %d\n", type); | 261 | printk(KERN_INFO "PCI: Using configuration type %d for base access\n", |
262 | type); | ||
262 | if (type == 1) | 263 | if (type == 1) |
263 | raw_pci_ops = &pci_direct_conf1; | 264 | raw_pci_ops = &pci_direct_conf1; |
264 | else | 265 | else |
@@ -275,8 +276,10 @@ int __init pci_direct_probe(void) | |||
275 | if (!region) | 276 | if (!region) |
276 | goto type2; | 277 | goto type2; |
277 | 278 | ||
278 | if (pci_check_type1()) | 279 | if (pci_check_type1()) { |
280 | raw_pci_ops = &pci_direct_conf1; | ||
279 | return 1; | 281 | return 1; |
282 | } | ||
280 | release_resource(region); | 283 | release_resource(region); |
281 | 284 | ||
282 | type2: | 285 | type2: |
@@ -290,7 +293,6 @@ int __init pci_direct_probe(void) | |||
290 | goto fail2; | 293 | goto fail2; |
291 | 294 | ||
292 | if (pci_check_type2()) { | 295 | if (pci_check_type2()) { |
293 | printk(KERN_INFO "PCI: Using configuration type 2\n"); | ||
294 | raw_pci_ops = &pci_direct_conf2; | 296 | raw_pci_ops = &pci_direct_conf2; |
295 | return 2; | 297 | return 2; |
296 | } | 298 | } |
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index a5ef5f551373..b60b2abd480c 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c | |||
@@ -493,3 +493,20 @@ static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev) | |||
493 | } | 493 | } |
494 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, | 494 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, |
495 | pci_siemens_interrupt_controller); | 495 | pci_siemens_interrupt_controller); |
496 | |||
497 | /* | ||
498 | * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config | ||
499 | * have 4096 bytes. Even if the device is capable, that doesn't mean we can | ||
500 | * access it. Maybe we don't have a way to generate extended config space | ||
501 | * accesses. So check it | ||
502 | */ | ||
503 | static void fam10h_pci_cfg_space_size(struct pci_dev *dev) | ||
504 | { | ||
505 | dev->cfg_size = pci_cfg_space_size_ext(dev, 0); | ||
506 | } | ||
507 | |||
508 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size); | ||
509 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size); | ||
510 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size); | ||
511 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size); | ||
512 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size); | ||
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index 0f5f7dd2a620..dd30c6076b5d 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c | |||
@@ -6,19 +6,17 @@ | |||
6 | in the right sequence from here. */ | 6 | in the right sequence from here. */ |
7 | static __init int pci_access_init(void) | 7 | static __init int pci_access_init(void) |
8 | { | 8 | { |
9 | int type __maybe_unused = 0; | ||
10 | |||
11 | #ifdef CONFIG_PCI_DIRECT | 9 | #ifdef CONFIG_PCI_DIRECT |
10 | int type = 0; | ||
11 | |||
12 | type = pci_direct_probe(); | 12 | type = pci_direct_probe(); |
13 | #endif | 13 | #endif |
14 | #ifdef CONFIG_PCI_MMCONFIG | 14 | |
15 | pci_mmcfg_init(type); | 15 | pci_mmcfg_early_init(); |
16 | #endif | 16 | |
17 | #ifdef CONFIG_PCI_OLPC | 17 | #ifdef CONFIG_PCI_OLPC |
18 | pci_olpc_init(); | 18 | pci_olpc_init(); |
19 | #endif | 19 | #endif |
20 | if (raw_pci_ops) | ||
21 | return 0; | ||
22 | #ifdef CONFIG_PCI_BIOS | 20 | #ifdef CONFIG_PCI_BIOS |
23 | pci_pcbios_init(); | 21 | pci_pcbios_init(); |
24 | #endif | 22 | #endif |
@@ -31,7 +29,7 @@ static __init int pci_access_init(void) | |||
31 | #ifdef CONFIG_PCI_DIRECT | 29 | #ifdef CONFIG_PCI_DIRECT |
32 | pci_direct_init(type); | 30 | pci_direct_init(type); |
33 | #endif | 31 | #endif |
34 | if (!raw_pci_ops) | 32 | if (!raw_pci_ops && !raw_pci_ext_ops) |
35 | printk(KERN_ERR | 33 | printk(KERN_ERR |
36 | "PCI: Fatal: No config space access function found\n"); | 34 | "PCI: Fatal: No config space access function found\n"); |
37 | 35 | ||
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 579745ca6b66..0908fca901bf 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c | |||
@@ -136,9 +136,11 @@ static void __init pirq_peer_trick(void) | |||
136 | busmap[e->bus] = 1; | 136 | busmap[e->bus] = 1; |
137 | } | 137 | } |
138 | for(i = 1; i < 256; i++) { | 138 | for(i = 1; i < 256; i++) { |
139 | int node; | ||
139 | if (!busmap[i] || pci_find_bus(0, i)) | 140 | if (!busmap[i] || pci_find_bus(0, i)) |
140 | continue; | 141 | continue; |
141 | if (pci_scan_bus_with_sysdata(i)) | 142 | node = get_mp_bus_to_node(i); |
143 | if (pci_scan_bus_on_node(i, &pci_root_ops, node)) | ||
142 | printk(KERN_INFO "PCI: Discovered primary peer " | 144 | printk(KERN_INFO "PCI: Discovered primary peer " |
143 | "bus %02x [IRQ]\n", i); | 145 | "bus %02x [IRQ]\n", i); |
144 | } | 146 | } |
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c index 9cc813e29706..ab6d4b18a88f 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/k8-bus_64.c | |||
@@ -1,83 +1,536 @@ | |||
1 | #include <linux/init.h> | 1 | #include <linux/init.h> |
2 | #include <linux/pci.h> | 2 | #include <linux/pci.h> |
3 | #include <asm/pci-direct.h> | ||
3 | #include <asm/mpspec.h> | 4 | #include <asm/mpspec.h> |
4 | #include <linux/cpumask.h> | 5 | #include <linux/cpumask.h> |
6 | #include <linux/topology.h> | ||
5 | 7 | ||
6 | /* | 8 | /* |
7 | * This discovers the pcibus <-> node mapping on AMD K8. | 9 | * This discovers the pcibus <-> node mapping on AMD K8. |
8 | * | 10 | * also get peer root bus resource for io,mmio |
9 | * RED-PEN need to call this again on PCI hotplug | ||
10 | * RED-PEN empty cpus get reported wrong | ||
11 | */ | 11 | */ |
12 | 12 | ||
13 | #define NODE_ID_REGISTER 0x60 | 13 | |
14 | #define NODE_ID(dword) (dword & 0x07) | 14 | /* |
15 | #define LDT_BUS_NUMBER_REGISTER_0 0x94 | 15 | * sub bus (transparent) will use entres from 3 to store extra from root, |
16 | #define LDT_BUS_NUMBER_REGISTER_1 0xB4 | 16 | * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? |
17 | #define LDT_BUS_NUMBER_REGISTER_2 0xD4 | 17 | */ |
18 | #define NR_LDT_BUS_NUMBER_REGISTERS 3 | 18 | #define RES_NUM 16 |
19 | #define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF) | 19 | struct pci_root_info { |
20 | #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) | 20 | char name[12]; |
21 | #define PCI_DEVICE_ID_K8HTCONFIG 0x1100 | 21 | unsigned int res_num; |
22 | struct resource res[RES_NUM]; | ||
23 | int bus_min; | ||
24 | int bus_max; | ||
25 | int node; | ||
26 | int link; | ||
27 | }; | ||
28 | |||
29 | /* 4 at this time, it may become to 32 */ | ||
30 | #define PCI_ROOT_NR 4 | ||
31 | static int pci_root_num; | ||
32 | static struct pci_root_info pci_root_info[PCI_ROOT_NR]; | ||
33 | |||
34 | #ifdef CONFIG_NUMA | ||
35 | |||
36 | #define BUS_NR 256 | ||
37 | |||
38 | static int mp_bus_to_node[BUS_NR]; | ||
39 | |||
40 | void set_mp_bus_to_node(int busnum, int node) | ||
41 | { | ||
42 | if (busnum >= 0 && busnum < BUS_NR) | ||
43 | mp_bus_to_node[busnum] = node; | ||
44 | } | ||
45 | |||
46 | int get_mp_bus_to_node(int busnum) | ||
47 | { | ||
48 | int node = -1; | ||
49 | |||
50 | if (busnum < 0 || busnum > (BUS_NR - 1)) | ||
51 | return node; | ||
52 | |||
53 | node = mp_bus_to_node[busnum]; | ||
54 | |||
55 | /* | ||
56 | * let numa_node_id to decide it later in dma_alloc_pages | ||
57 | * if there is no ram on that node | ||
58 | */ | ||
59 | if (node != -1 && !node_online(node)) | ||
60 | node = -1; | ||
61 | |||
62 | return node; | ||
63 | } | ||
64 | #endif | ||
65 | |||
66 | void set_pci_bus_resources_arch_default(struct pci_bus *b) | ||
67 | { | ||
68 | int i; | ||
69 | int j; | ||
70 | struct pci_root_info *info; | ||
71 | |||
72 | /* if only one root bus, don't need to anything */ | ||
73 | if (pci_root_num < 2) | ||
74 | return; | ||
75 | |||
76 | for (i = 0; i < pci_root_num; i++) { | ||
77 | if (pci_root_info[i].bus_min == b->number) | ||
78 | break; | ||
79 | } | ||
80 | |||
81 | if (i == pci_root_num) | ||
82 | return; | ||
83 | |||
84 | info = &pci_root_info[i]; | ||
85 | for (j = 0; j < info->res_num; j++) { | ||
86 | struct resource *res; | ||
87 | struct resource *root; | ||
88 | |||
89 | res = &info->res[j]; | ||
90 | b->resource[j] = res; | ||
91 | if (res->flags & IORESOURCE_IO) | ||
92 | root = &ioport_resource; | ||
93 | else | ||
94 | root = &iomem_resource; | ||
95 | insert_resource(root, res); | ||
96 | } | ||
97 | } | ||
98 | |||
99 | #define RANGE_NUM 16 | ||
100 | |||
101 | struct res_range { | ||
102 | size_t start; | ||
103 | size_t end; | ||
104 | }; | ||
105 | |||
106 | static void __init update_range(struct res_range *range, size_t start, | ||
107 | size_t end) | ||
108 | { | ||
109 | int i; | ||
110 | int j; | ||
111 | |||
112 | for (j = 0; j < RANGE_NUM; j++) { | ||
113 | if (!range[j].end) | ||
114 | continue; | ||
115 | |||
116 | if (start <= range[j].start && end >= range[j].end) { | ||
117 | range[j].start = 0; | ||
118 | range[j].end = 0; | ||
119 | continue; | ||
120 | } | ||
121 | |||
122 | if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { | ||
123 | range[j].start = end + 1; | ||
124 | continue; | ||
125 | } | ||
126 | |||
127 | |||
128 | if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { | ||
129 | range[j].end = start - 1; | ||
130 | continue; | ||
131 | } | ||
132 | |||
133 | if (start > range[j].start && end < range[j].end) { | ||
134 | /* find the new spare */ | ||
135 | for (i = 0; i < RANGE_NUM; i++) { | ||
136 | if (range[i].end == 0) | ||
137 | break; | ||
138 | } | ||
139 | if (i < RANGE_NUM) { | ||
140 | range[i].end = range[j].end; | ||
141 | range[i].start = end + 1; | ||
142 | } else { | ||
143 | printk(KERN_ERR "run of slot in ranges\n"); | ||
144 | } | ||
145 | range[j].end = start - 1; | ||
146 | continue; | ||
147 | } | ||
148 | } | ||
149 | } | ||
150 | |||
151 | static void __init update_res(struct pci_root_info *info, size_t start, | ||
152 | size_t end, unsigned long flags, int merge) | ||
153 | { | ||
154 | int i; | ||
155 | struct resource *res; | ||
156 | |||
157 | if (!merge) | ||
158 | goto addit; | ||
159 | |||
160 | /* try to merge it with old one */ | ||
161 | for (i = 0; i < info->res_num; i++) { | ||
162 | size_t final_start, final_end; | ||
163 | size_t common_start, common_end; | ||
164 | |||
165 | res = &info->res[i]; | ||
166 | if (res->flags != flags) | ||
167 | continue; | ||
168 | |||
169 | common_start = max((size_t)res->start, start); | ||
170 | common_end = min((size_t)res->end, end); | ||
171 | if (common_start > common_end + 1) | ||
172 | continue; | ||
173 | |||
174 | final_start = min((size_t)res->start, start); | ||
175 | final_end = max((size_t)res->end, end); | ||
176 | |||
177 | res->start = final_start; | ||
178 | res->end = final_end; | ||
179 | return; | ||
180 | } | ||
181 | |||
182 | addit: | ||
183 | |||
184 | /* need to add that */ | ||
185 | if (info->res_num >= RES_NUM) | ||
186 | return; | ||
187 | |||
188 | res = &info->res[info->res_num]; | ||
189 | res->name = info->name; | ||
190 | res->flags = flags; | ||
191 | res->start = start; | ||
192 | res->end = end; | ||
193 | res->child = NULL; | ||
194 | info->res_num++; | ||
195 | } | ||
196 | |||
197 | struct pci_hostbridge_probe { | ||
198 | u32 bus; | ||
199 | u32 slot; | ||
200 | u32 vendor; | ||
201 | u32 device; | ||
202 | }; | ||
203 | |||
204 | static struct pci_hostbridge_probe pci_probes[] __initdata = { | ||
205 | { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, | ||
206 | { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, | ||
207 | { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, | ||
208 | { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, | ||
209 | }; | ||
210 | |||
211 | static u64 __initdata fam10h_mmconf_start; | ||
212 | static u64 __initdata fam10h_mmconf_end; | ||
213 | static void __init get_pci_mmcfg_amd_fam10h_range(void) | ||
214 | { | ||
215 | u32 address; | ||
216 | u64 base, msr; | ||
217 | unsigned segn_busn_bits; | ||
218 | |||
219 | /* assume all cpus from fam10h have mmconf */ | ||
220 | if (boot_cpu_data.x86 < 0x10) | ||
221 | return; | ||
222 | |||
223 | address = MSR_FAM10H_MMIO_CONF_BASE; | ||
224 | rdmsrl(address, msr); | ||
225 | |||
226 | /* mmconfig is not enable */ | ||
227 | if (!(msr & FAM10H_MMIO_CONF_ENABLE)) | ||
228 | return; | ||
229 | |||
230 | base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT); | ||
231 | |||
232 | segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & | ||
233 | FAM10H_MMIO_CONF_BUSRANGE_MASK; | ||
234 | |||
235 | fam10h_mmconf_start = base; | ||
236 | fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; | ||
237 | } | ||
22 | 238 | ||
23 | /** | 239 | /** |
24 | * fill_mp_bus_to_cpumask() | 240 | * early_fill_mp_bus_to_node() |
241 | * called before pcibios_scan_root and pci_scan_bus | ||
25 | * fills the mp_bus_to_cpumask array based according to the LDT Bus Number | 242 | * fills the mp_bus_to_cpumask array based according to the LDT Bus Number |
26 | * Registers found in the K8 northbridge | 243 | * Registers found in the K8 northbridge |
27 | */ | 244 | */ |
28 | __init static int | 245 | static int __init early_fill_mp_bus_info(void) |
29 | fill_mp_bus_to_cpumask(void) | ||
30 | { | 246 | { |
31 | struct pci_dev *nb_dev = NULL; | 247 | int i; |
32 | int i, j; | 248 | int j; |
33 | u32 ldtbus, nid; | 249 | unsigned bus; |
34 | static int lbnr[3] = { | 250 | unsigned slot; |
35 | LDT_BUS_NUMBER_REGISTER_0, | 251 | int found; |
36 | LDT_BUS_NUMBER_REGISTER_1, | 252 | int node; |
37 | LDT_BUS_NUMBER_REGISTER_2 | 253 | int link; |
38 | }; | 254 | int def_node; |
39 | 255 | int def_link; | |
40 | while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, | 256 | struct pci_root_info *info; |
41 | PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) { | 257 | u32 reg; |
42 | pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid); | 258 | struct resource *res; |
43 | 259 | size_t start; | |
44 | for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { | 260 | size_t end; |
45 | pci_read_config_dword(nb_dev, lbnr[i], &ldtbus); | 261 | struct res_range range[RANGE_NUM]; |
46 | /* | 262 | u64 val; |
47 | * if there are no busses hanging off of the current | 263 | u32 address; |
48 | * ldt link then both the secondary and subordinate | 264 | |
49 | * bus number fields are set to 0. | 265 | #ifdef CONFIG_NUMA |
50 | * | 266 | for (i = 0; i < BUS_NR; i++) |
51 | * RED-PEN | 267 | mp_bus_to_node[i] = -1; |
52 | * This is slightly broken because it assumes | 268 | #endif |
53 | * HT node IDs == Linux node ids, which is not always | 269 | |
54 | * true. However it is probably mostly true. | 270 | if (!early_pci_allowed()) |
55 | */ | 271 | return -1; |
56 | if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0 | 272 | |
57 | && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) { | 273 | found = 0; |
58 | for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); | 274 | for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { |
59 | j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); | 275 | u32 id; |
60 | j++) { | 276 | u16 device; |
61 | struct pci_bus *bus; | 277 | u16 vendor; |
62 | struct pci_sysdata *sd; | 278 | |
63 | 279 | bus = pci_probes[i].bus; | |
64 | long node = NODE_ID(nid); | 280 | slot = pci_probes[i].slot; |
65 | /* Algorithm a bit dumb, but | 281 | id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); |
66 | it shouldn't matter here */ | 282 | |
67 | bus = pci_find_bus(0, j); | 283 | vendor = id & 0xffff; |
68 | if (!bus) | 284 | device = (id>>16) & 0xffff; |
69 | continue; | 285 | if (pci_probes[i].vendor == vendor && |
70 | if (!node_online(node)) | 286 | pci_probes[i].device == device) { |
71 | node = 0; | 287 | found = 1; |
72 | 288 | break; | |
73 | sd = bus->sysdata; | 289 | } |
74 | sd->node = node; | 290 | } |
75 | } | 291 | |
292 | if (!found) | ||
293 | return 0; | ||
294 | |||
295 | pci_root_num = 0; | ||
296 | for (i = 0; i < 4; i++) { | ||
297 | int min_bus; | ||
298 | int max_bus; | ||
299 | reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); | ||
300 | |||
301 | /* Check if that register is enabled for bus range */ | ||
302 | if ((reg & 7) != 3) | ||
303 | continue; | ||
304 | |||
305 | min_bus = (reg >> 16) & 0xff; | ||
306 | max_bus = (reg >> 24) & 0xff; | ||
307 | node = (reg >> 4) & 0x07; | ||
308 | #ifdef CONFIG_NUMA | ||
309 | for (j = min_bus; j <= max_bus; j++) | ||
310 | mp_bus_to_node[j] = (unsigned char) node; | ||
311 | #endif | ||
312 | link = (reg >> 8) & 0x03; | ||
313 | |||
314 | info = &pci_root_info[pci_root_num]; | ||
315 | info->bus_min = min_bus; | ||
316 | info->bus_max = max_bus; | ||
317 | info->node = node; | ||
318 | info->link = link; | ||
319 | sprintf(info->name, "PCI Bus #%02x", min_bus); | ||
320 | pci_root_num++; | ||
321 | } | ||
322 | |||
323 | /* get the default node and link for left over res */ | ||
324 | reg = read_pci_config(bus, slot, 0, 0x60); | ||
325 | def_node = (reg >> 8) & 0x07; | ||
326 | reg = read_pci_config(bus, slot, 0, 0x64); | ||
327 | def_link = (reg >> 8) & 0x03; | ||
328 | |||
329 | memset(range, 0, sizeof(range)); | ||
330 | range[0].end = 0xffff; | ||
331 | /* io port resource */ | ||
332 | for (i = 0; i < 4; i++) { | ||
333 | reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); | ||
334 | if (!(reg & 3)) | ||
335 | continue; | ||
336 | |||
337 | start = reg & 0xfff000; | ||
338 | reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); | ||
339 | node = reg & 0x07; | ||
340 | link = (reg >> 4) & 0x03; | ||
341 | end = (reg & 0xfff000) | 0xfff; | ||
342 | |||
343 | /* find the position */ | ||
344 | for (j = 0; j < pci_root_num; j++) { | ||
345 | info = &pci_root_info[j]; | ||
346 | if (info->node == node && info->link == link) | ||
347 | break; | ||
348 | } | ||
349 | if (j == pci_root_num) | ||
350 | continue; /* not found */ | ||
351 | |||
352 | info = &pci_root_info[j]; | ||
353 | printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", | ||
354 | node, link, (u64)start, (u64)end); | ||
355 | |||
356 | /* kernel only handle 16 bit only */ | ||
357 | if (end > 0xffff) | ||
358 | end = 0xffff; | ||
359 | update_res(info, start, end, IORESOURCE_IO, 1); | ||
360 | update_range(range, start, end); | ||
361 | } | ||
362 | /* add left over io port range to def node/link, [0, 0xffff] */ | ||
363 | /* find the position */ | ||
364 | for (j = 0; j < pci_root_num; j++) { | ||
365 | info = &pci_root_info[j]; | ||
366 | if (info->node == def_node && info->link == def_link) | ||
367 | break; | ||
368 | } | ||
369 | if (j < pci_root_num) { | ||
370 | info = &pci_root_info[j]; | ||
371 | for (i = 0; i < RANGE_NUM; i++) { | ||
372 | if (!range[i].end) | ||
373 | continue; | ||
374 | |||
375 | update_res(info, range[i].start, range[i].end, | ||
376 | IORESOURCE_IO, 1); | ||
377 | } | ||
378 | } | ||
379 | |||
380 | memset(range, 0, sizeof(range)); | ||
381 | /* 0xfd00000000-0xffffffffff for HT */ | ||
382 | range[0].end = (0xfdULL<<32) - 1; | ||
383 | |||
384 | /* need to take out [0, TOM) for RAM*/ | ||
385 | address = MSR_K8_TOP_MEM1; | ||
386 | rdmsrl(address, val); | ||
387 | end = (val & 0xffffff8000000ULL); | ||
388 | printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); | ||
389 | if (end < (1ULL<<32)) | ||
390 | update_range(range, 0, end - 1); | ||
391 | |||
392 | /* get mmconfig */ | ||
393 | get_pci_mmcfg_amd_fam10h_range(); | ||
394 | /* need to take out mmconf range */ | ||
395 | if (fam10h_mmconf_end) { | ||
396 | printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); | ||
397 | update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); | ||
398 | } | ||
399 | |||
400 | /* mmio resource */ | ||
401 | for (i = 0; i < 8; i++) { | ||
402 | reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); | ||
403 | if (!(reg & 3)) | ||
404 | continue; | ||
405 | |||
406 | start = reg & 0xffffff00; /* 39:16 on 31:8*/ | ||
407 | start <<= 8; | ||
408 | reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); | ||
409 | node = reg & 0x07; | ||
410 | link = (reg >> 4) & 0x03; | ||
411 | end = (reg & 0xffffff00); | ||
412 | end <<= 8; | ||
413 | end |= 0xffff; | ||
414 | |||
415 | /* find the position */ | ||
416 | for (j = 0; j < pci_root_num; j++) { | ||
417 | info = &pci_root_info[j]; | ||
418 | if (info->node == node && info->link == link) | ||
419 | break; | ||
420 | } | ||
421 | if (j == pci_root_num) | ||
422 | continue; /* not found */ | ||
423 | |||
424 | info = &pci_root_info[j]; | ||
425 | |||
426 | printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", | ||
427 | node, link, (u64)start, (u64)end); | ||
428 | /* | ||
429 | * some sick allocation would have range overlap with fam10h | ||
430 | * mmconf range, so need to update start and end. | ||
431 | */ | ||
432 | if (fam10h_mmconf_end) { | ||
433 | int changed = 0; | ||
434 | u64 endx = 0; | ||
435 | if (start >= fam10h_mmconf_start && | ||
436 | start <= fam10h_mmconf_end) { | ||
437 | start = fam10h_mmconf_end + 1; | ||
438 | changed = 1; | ||
439 | } | ||
440 | |||
441 | if (end >= fam10h_mmconf_start && | ||
442 | end <= fam10h_mmconf_end) { | ||
443 | end = fam10h_mmconf_start - 1; | ||
444 | changed = 1; | ||
445 | } | ||
446 | |||
447 | if (start < fam10h_mmconf_start && | ||
448 | end > fam10h_mmconf_end) { | ||
449 | /* we got a hole */ | ||
450 | endx = fam10h_mmconf_start - 1; | ||
451 | update_res(info, start, endx, IORESOURCE_MEM, 0); | ||
452 | update_range(range, start, endx); | ||
453 | printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); | ||
454 | start = fam10h_mmconf_end + 1; | ||
455 | changed = 1; | ||
456 | } | ||
457 | if (changed) { | ||
458 | if (start <= end) { | ||
459 | printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); | ||
460 | } else { | ||
461 | printk(KERN_CONT "%s\n", endx?"":" ==> none"); | ||
462 | continue; | ||
463 | } | ||
76 | } | 464 | } |
77 | } | 465 | } |
466 | |||
467 | update_res(info, start, end, IORESOURCE_MEM, 1); | ||
468 | update_range(range, start, end); | ||
469 | printk(KERN_CONT "\n"); | ||
470 | } | ||
471 | |||
472 | /* need to take out [4G, TOM2) for RAM*/ | ||
473 | /* SYS_CFG */ | ||
474 | address = MSR_K8_SYSCFG; | ||
475 | rdmsrl(address, val); | ||
476 | /* TOP_MEM2 is enabled? */ | ||
477 | if (val & (1<<21)) { | ||
478 | /* TOP_MEM2 */ | ||
479 | address = MSR_K8_TOP_MEM2; | ||
480 | rdmsrl(address, val); | ||
481 | end = (val & 0xffffff8000000ULL); | ||
482 | printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); | ||
483 | update_range(range, 1ULL<<32, end - 1); | ||
484 | } | ||
485 | |||
486 | /* | ||
487 | * add left over mmio range to def node/link ? | ||
488 | * that is tricky, just record range in from start_min to 4G | ||
489 | */ | ||
490 | for (j = 0; j < pci_root_num; j++) { | ||
491 | info = &pci_root_info[j]; | ||
492 | if (info->node == def_node && info->link == def_link) | ||
493 | break; | ||
494 | } | ||
495 | if (j < pci_root_num) { | ||
496 | info = &pci_root_info[j]; | ||
497 | |||
498 | for (i = 0; i < RANGE_NUM; i++) { | ||
499 | if (!range[i].end) | ||
500 | continue; | ||
501 | |||
502 | update_res(info, range[i].start, range[i].end, | ||
503 | IORESOURCE_MEM, 1); | ||
504 | } | ||
505 | } | ||
506 | |||
507 | #ifdef CONFIG_NUMA | ||
508 | for (i = 0; i < BUS_NR; i++) { | ||
509 | node = mp_bus_to_node[i]; | ||
510 | if (node >= 0) | ||
511 | printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node); | ||
512 | } | ||
513 | #endif | ||
514 | |||
515 | for (i = 0; i < pci_root_num; i++) { | ||
516 | int res_num; | ||
517 | int busnum; | ||
518 | |||
519 | info = &pci_root_info[i]; | ||
520 | res_num = info->res_num; | ||
521 | busnum = info->bus_min; | ||
522 | printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", | ||
523 | info->bus_min, info->bus_max, info->node, info->link); | ||
524 | for (j = 0; j < res_num; j++) { | ||
525 | res = &info->res[j]; | ||
526 | printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", | ||
527 | busnum, j, | ||
528 | (res->flags & IORESOURCE_IO)?"io port":"mmio", | ||
529 | res->start, res->end); | ||
530 | } | ||
78 | } | 531 | } |
79 | 532 | ||
80 | return 0; | 533 | return 0; |
81 | } | 534 | } |
82 | 535 | ||
83 | fs_initcall(fill_mp_bus_to_cpumask); | 536 | postcore_initcall(early_fill_mp_bus_info); |
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index e041ced0ce13..a67921ce60af 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c | |||
@@ -12,6 +12,7 @@ | |||
12 | static void __devinit pcibios_fixup_peer_bridges(void) | 12 | static void __devinit pcibios_fixup_peer_bridges(void) |
13 | { | 13 | { |
14 | int n, devfn; | 14 | int n, devfn; |
15 | long node; | ||
15 | 16 | ||
16 | if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) | 17 | if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) |
17 | return; | 18 | return; |
@@ -21,12 +22,13 @@ static void __devinit pcibios_fixup_peer_bridges(void) | |||
21 | u32 l; | 22 | u32 l; |
22 | if (pci_find_bus(0, n)) | 23 | if (pci_find_bus(0, n)) |
23 | continue; | 24 | continue; |
25 | node = get_mp_bus_to_node(n); | ||
24 | for (devfn = 0; devfn < 256; devfn += 8) { | 26 | for (devfn = 0; devfn < 256; devfn += 8) { |
25 | if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && | 27 | if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && |
26 | l != 0x0000 && l != 0xffff) { | 28 | l != 0x0000 && l != 0xffff) { |
27 | DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); | 29 | DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); |
28 | printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); | 30 | printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); |
29 | pci_scan_bus_with_sysdata(n); | 31 | pci_scan_bus_on_node(n, &pci_root_ops, node); |
30 | break; | 32 | break; |
31 | } | 33 | } |
32 | } | 34 | } |
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 8d54df4dfaad..0cfebecf2a8f 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c | |||
@@ -28,7 +28,7 @@ static int __initdata pci_mmcfg_resources_inserted; | |||
28 | static const char __init *pci_mmcfg_e7520(void) | 28 | static const char __init *pci_mmcfg_e7520(void) |
29 | { | 29 | { |
30 | u32 win; | 30 | u32 win; |
31 | pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); | 31 | raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win); |
32 | 32 | ||
33 | win = win & 0xf000; | 33 | win = win & 0xf000; |
34 | if(win == 0x0000 || win == 0xf000) | 34 | if(win == 0x0000 || win == 0xf000) |
@@ -53,7 +53,7 @@ static const char __init *pci_mmcfg_intel_945(void) | |||
53 | 53 | ||
54 | pci_mmcfg_config_num = 1; | 54 | pci_mmcfg_config_num = 1; |
55 | 55 | ||
56 | pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar); | 56 | raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar); |
57 | 57 | ||
58 | /* Enable bit */ | 58 | /* Enable bit */ |
59 | if (!(pciexbar & 1)) | 59 | if (!(pciexbar & 1)) |
@@ -100,33 +100,102 @@ static const char __init *pci_mmcfg_intel_945(void) | |||
100 | return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; | 100 | return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; |
101 | } | 101 | } |
102 | 102 | ||
103 | static const char __init *pci_mmcfg_amd_fam10h(void) | ||
104 | { | ||
105 | u32 low, high, address; | ||
106 | u64 base, msr; | ||
107 | int i; | ||
108 | unsigned segnbits = 0, busnbits; | ||
109 | |||
110 | if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) | ||
111 | return NULL; | ||
112 | |||
113 | address = MSR_FAM10H_MMIO_CONF_BASE; | ||
114 | if (rdmsr_safe(address, &low, &high)) | ||
115 | return NULL; | ||
116 | |||
117 | msr = high; | ||
118 | msr <<= 32; | ||
119 | msr |= low; | ||
120 | |||
121 | /* mmconfig is not enable */ | ||
122 | if (!(msr & FAM10H_MMIO_CONF_ENABLE)) | ||
123 | return NULL; | ||
124 | |||
125 | base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT); | ||
126 | |||
127 | busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & | ||
128 | FAM10H_MMIO_CONF_BUSRANGE_MASK; | ||
129 | |||
130 | /* | ||
131 | * only handle bus 0 ? | ||
132 | * need to skip it | ||
133 | */ | ||
134 | if (!busnbits) | ||
135 | return NULL; | ||
136 | |||
137 | if (busnbits > 8) { | ||
138 | segnbits = busnbits - 8; | ||
139 | busnbits = 8; | ||
140 | } | ||
141 | |||
142 | pci_mmcfg_config_num = (1 << segnbits); | ||
143 | pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) * | ||
144 | pci_mmcfg_config_num, GFP_KERNEL); | ||
145 | if (!pci_mmcfg_config) | ||
146 | return NULL; | ||
147 | |||
148 | for (i = 0; i < (1 << segnbits); i++) { | ||
149 | pci_mmcfg_config[i].address = base + (1<<28) * i; | ||
150 | pci_mmcfg_config[i].pci_segment = i; | ||
151 | pci_mmcfg_config[i].start_bus_number = 0; | ||
152 | pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1; | ||
153 | } | ||
154 | |||
155 | return "AMD Family 10h NB"; | ||
156 | } | ||
157 | |||
103 | struct pci_mmcfg_hostbridge_probe { | 158 | struct pci_mmcfg_hostbridge_probe { |
159 | u32 bus; | ||
160 | u32 devfn; | ||
104 | u32 vendor; | 161 | u32 vendor; |
105 | u32 device; | 162 | u32 device; |
106 | const char *(*probe)(void); | 163 | const char *(*probe)(void); |
107 | }; | 164 | }; |
108 | 165 | ||
109 | static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { | 166 | static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { |
110 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, | 167 | { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL, |
111 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, | 168 | PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, |
169 | { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL, | ||
170 | PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, | ||
171 | { 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD, | ||
172 | 0x1200, pci_mmcfg_amd_fam10h }, | ||
173 | { 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD, | ||
174 | 0x1200, pci_mmcfg_amd_fam10h }, | ||
112 | }; | 175 | }; |
113 | 176 | ||
114 | static int __init pci_mmcfg_check_hostbridge(void) | 177 | static int __init pci_mmcfg_check_hostbridge(void) |
115 | { | 178 | { |
116 | u32 l; | 179 | u32 l; |
180 | u32 bus, devfn; | ||
117 | u16 vendor, device; | 181 | u16 vendor, device; |
118 | int i; | 182 | int i; |
119 | const char *name; | 183 | const char *name; |
120 | 184 | ||
121 | pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0, 4, &l); | 185 | if (!raw_pci_ops) |
122 | vendor = l & 0xffff; | 186 | return 0; |
123 | device = (l >> 16) & 0xffff; | ||
124 | 187 | ||
125 | pci_mmcfg_config_num = 0; | 188 | pci_mmcfg_config_num = 0; |
126 | pci_mmcfg_config = NULL; | 189 | pci_mmcfg_config = NULL; |
127 | name = NULL; | 190 | name = NULL; |
128 | 191 | ||
129 | for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { | 192 | for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { |
193 | bus = pci_mmcfg_probes[i].bus; | ||
194 | devfn = pci_mmcfg_probes[i].devfn; | ||
195 | raw_pci_ops->read(0, bus, devfn, 0, 4, &l); | ||
196 | vendor = l & 0xffff; | ||
197 | device = (l >> 16) & 0xffff; | ||
198 | |||
130 | if (pci_mmcfg_probes[i].vendor == vendor && | 199 | if (pci_mmcfg_probes[i].vendor == vendor && |
131 | pci_mmcfg_probes[i].device == device) | 200 | pci_mmcfg_probes[i].device == device) |
132 | name = pci_mmcfg_probes[i].probe(); | 201 | name = pci_mmcfg_probes[i].probe(); |
@@ -173,9 +242,78 @@ static void __init pci_mmcfg_insert_resources(unsigned long resource_flags) | |||
173 | pci_mmcfg_resources_inserted = 1; | 242 | pci_mmcfg_resources_inserted = 1; |
174 | } | 243 | } |
175 | 244 | ||
176 | static void __init pci_mmcfg_reject_broken(int type) | 245 | static acpi_status __init check_mcfg_resource(struct acpi_resource *res, |
246 | void *data) | ||
247 | { | ||
248 | struct resource *mcfg_res = data; | ||
249 | struct acpi_resource_address64 address; | ||
250 | acpi_status status; | ||
251 | |||
252 | if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) { | ||
253 | struct acpi_resource_fixed_memory32 *fixmem32 = | ||
254 | &res->data.fixed_memory32; | ||
255 | if (!fixmem32) | ||
256 | return AE_OK; | ||
257 | if ((mcfg_res->start >= fixmem32->address) && | ||
258 | (mcfg_res->end < (fixmem32->address + | ||
259 | fixmem32->address_length))) { | ||
260 | mcfg_res->flags = 1; | ||
261 | return AE_CTRL_TERMINATE; | ||
262 | } | ||
263 | } | ||
264 | if ((res->type != ACPI_RESOURCE_TYPE_ADDRESS32) && | ||
265 | (res->type != ACPI_RESOURCE_TYPE_ADDRESS64)) | ||
266 | return AE_OK; | ||
267 | |||
268 | status = acpi_resource_to_address64(res, &address); | ||
269 | if (ACPI_FAILURE(status) || | ||
270 | (address.address_length <= 0) || | ||
271 | (address.resource_type != ACPI_MEMORY_RANGE)) | ||
272 | return AE_OK; | ||
273 | |||
274 | if ((mcfg_res->start >= address.minimum) && | ||
275 | (mcfg_res->end < (address.minimum + address.address_length))) { | ||
276 | mcfg_res->flags = 1; | ||
277 | return AE_CTRL_TERMINATE; | ||
278 | } | ||
279 | return AE_OK; | ||
280 | } | ||
281 | |||
282 | static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl, | ||
283 | void *context, void **rv) | ||
284 | { | ||
285 | struct resource *mcfg_res = context; | ||
286 | |||
287 | acpi_walk_resources(handle, METHOD_NAME__CRS, | ||
288 | check_mcfg_resource, context); | ||
289 | |||
290 | if (mcfg_res->flags) | ||
291 | return AE_CTRL_TERMINATE; | ||
292 | |||
293 | return AE_OK; | ||
294 | } | ||
295 | |||
296 | static int __init is_acpi_reserved(unsigned long start, unsigned long end) | ||
297 | { | ||
298 | struct resource mcfg_res; | ||
299 | |||
300 | mcfg_res.start = start; | ||
301 | mcfg_res.end = end; | ||
302 | mcfg_res.flags = 0; | ||
303 | |||
304 | acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL); | ||
305 | |||
306 | if (!mcfg_res.flags) | ||
307 | acpi_get_devices("PNP0C02", find_mboard_resource, &mcfg_res, | ||
308 | NULL); | ||
309 | |||
310 | return mcfg_res.flags; | ||
311 | } | ||
312 | |||
313 | static void __init pci_mmcfg_reject_broken(int early) | ||
177 | { | 314 | { |
178 | typeof(pci_mmcfg_config[0]) *cfg; | 315 | typeof(pci_mmcfg_config[0]) *cfg; |
316 | int i; | ||
179 | 317 | ||
180 | if ((pci_mmcfg_config_num == 0) || | 318 | if ((pci_mmcfg_config_num == 0) || |
181 | (pci_mmcfg_config == NULL) || | 319 | (pci_mmcfg_config == NULL) || |
@@ -184,51 +322,80 @@ static void __init pci_mmcfg_reject_broken(int type) | |||
184 | 322 | ||
185 | cfg = &pci_mmcfg_config[0]; | 323 | cfg = &pci_mmcfg_config[0]; |
186 | 324 | ||
187 | /* | 325 | for (i = 0; i < pci_mmcfg_config_num; i++) { |
188 | * Handle more broken MCFG tables on Asus etc. | 326 | int valid = 0; |
189 | * They only contain a single entry for bus 0-0. | 327 | u32 size = (cfg->end_bus_number + 1) << 20; |
190 | */ | 328 | cfg = &pci_mmcfg_config[i]; |
191 | if (pci_mmcfg_config_num == 1 && | 329 | printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " |
192 | cfg->pci_segment == 0 && | 330 | "segment %hu buses %u - %u\n", |
193 | (cfg->start_bus_number | cfg->end_bus_number) == 0) { | 331 | i, (unsigned long)cfg->address, cfg->pci_segment, |
194 | printk(KERN_ERR "PCI: start and end of bus number is 0. " | 332 | (unsigned int)cfg->start_bus_number, |
195 | "Rejected as broken MCFG.\n"); | 333 | (unsigned int)cfg->end_bus_number); |
196 | goto reject; | 334 | |
335 | if (!early && | ||
336 | is_acpi_reserved(cfg->address, cfg->address + size - 1)) { | ||
337 | printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved " | ||
338 | "in ACPI motherboard resources\n", | ||
339 | cfg->address); | ||
340 | valid = 1; | ||
341 | } | ||
342 | |||
343 | if (valid) | ||
344 | continue; | ||
345 | |||
346 | if (!early) | ||
347 | printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" | ||
348 | " reserved in ACPI motherboard resources\n", | ||
349 | cfg->address); | ||
350 | /* Don't try to do this check unless configuration | ||
351 | type 1 is available. how about type 2 ?*/ | ||
352 | if (raw_pci_ops && e820_all_mapped(cfg->address, | ||
353 | cfg->address + size - 1, | ||
354 | E820_RESERVED)) { | ||
355 | printk(KERN_NOTICE | ||
356 | "PCI: MCFG area at %Lx reserved in E820\n", | ||
357 | cfg->address); | ||
358 | valid = 1; | ||
359 | } | ||
360 | |||
361 | if (!valid) | ||
362 | goto reject; | ||
197 | } | 363 | } |
198 | 364 | ||
199 | /* | ||
200 | * Only do this check when type 1 works. If it doesn't work | ||
201 | * assume we run on a Mac and always use MCFG | ||
202 | */ | ||
203 | if (type == 1 && !e820_all_mapped(cfg->address, | ||
204 | cfg->address + MMCONFIG_APER_MIN, | ||
205 | E820_RESERVED)) { | ||
206 | printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" | ||
207 | " E820-reserved\n", cfg->address); | ||
208 | goto reject; | ||
209 | } | ||
210 | return; | 365 | return; |
211 | 366 | ||
212 | reject: | 367 | reject: |
213 | printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); | 368 | printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); |
369 | pci_mmcfg_arch_free(); | ||
214 | kfree(pci_mmcfg_config); | 370 | kfree(pci_mmcfg_config); |
215 | pci_mmcfg_config = NULL; | 371 | pci_mmcfg_config = NULL; |
216 | pci_mmcfg_config_num = 0; | 372 | pci_mmcfg_config_num = 0; |
217 | } | 373 | } |
218 | 374 | ||
219 | void __init pci_mmcfg_init(int type) | 375 | static int __initdata known_bridge; |
220 | { | ||
221 | int known_bridge = 0; | ||
222 | 376 | ||
377 | void __init __pci_mmcfg_init(int early) | ||
378 | { | ||
379 | /* MMCONFIG disabled */ | ||
223 | if ((pci_probe & PCI_PROBE_MMCONF) == 0) | 380 | if ((pci_probe & PCI_PROBE_MMCONF) == 0) |
224 | return; | 381 | return; |
225 | 382 | ||
226 | if (type == 1 && pci_mmcfg_check_hostbridge()) | 383 | /* MMCONFIG already enabled */ |
227 | known_bridge = 1; | 384 | if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF)) |
385 | return; | ||
386 | |||
387 | /* for late to exit */ | ||
388 | if (known_bridge) | ||
389 | return; | ||
390 | |||
391 | if (early) { | ||
392 | if (pci_mmcfg_check_hostbridge()) | ||
393 | known_bridge = 1; | ||
394 | } | ||
228 | 395 | ||
229 | if (!known_bridge) { | 396 | if (!known_bridge) { |
230 | acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); | 397 | acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); |
231 | pci_mmcfg_reject_broken(type); | 398 | pci_mmcfg_reject_broken(early); |
232 | } | 399 | } |
233 | 400 | ||
234 | if ((pci_mmcfg_config_num == 0) || | 401 | if ((pci_mmcfg_config_num == 0) || |
@@ -249,6 +416,16 @@ void __init pci_mmcfg_init(int type) | |||
249 | } | 416 | } |
250 | } | 417 | } |
251 | 418 | ||
419 | void __init pci_mmcfg_early_init(void) | ||
420 | { | ||
421 | __pci_mmcfg_init(1); | ||
422 | } | ||
423 | |||
424 | void __init pci_mmcfg_late_init(void) | ||
425 | { | ||
426 | __pci_mmcfg_init(0); | ||
427 | } | ||
428 | |||
252 | static int __init pci_mmcfg_late_insert_resources(void) | 429 | static int __init pci_mmcfg_late_insert_resources(void) |
253 | { | 430 | { |
254 | /* | 431 | /* |
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c index 081816ada057..f3c761dce695 100644 --- a/arch/x86/pci/mmconfig_32.c +++ b/arch/x86/pci/mmconfig_32.c | |||
@@ -136,3 +136,7 @@ int __init pci_mmcfg_arch_init(void) | |||
136 | raw_pci_ext_ops = &pci_mmcfg; | 136 | raw_pci_ext_ops = &pci_mmcfg; |
137 | return 1; | 137 | return 1; |
138 | } | 138 | } |
139 | |||
140 | void __init pci_mmcfg_arch_free(void) | ||
141 | { | ||
142 | } | ||
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c index 9207fd49233c..a1994163c99d 100644 --- a/arch/x86/pci/mmconfig_64.c +++ b/arch/x86/pci/mmconfig_64.c | |||
@@ -127,7 +127,7 @@ static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) | |||
127 | int __init pci_mmcfg_arch_init(void) | 127 | int __init pci_mmcfg_arch_init(void) |
128 | { | 128 | { |
129 | int i; | 129 | int i; |
130 | pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * | 130 | pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) * |
131 | pci_mmcfg_config_num, GFP_KERNEL); | 131 | pci_mmcfg_config_num, GFP_KERNEL); |
132 | if (pci_mmcfg_virt == NULL) { | 132 | if (pci_mmcfg_virt == NULL) { |
133 | printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); | 133 | printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); |
@@ -141,9 +141,29 @@ int __init pci_mmcfg_arch_init(void) | |||
141 | printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " | 141 | printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " |
142 | "segment %d\n", | 142 | "segment %d\n", |
143 | pci_mmcfg_config[i].pci_segment); | 143 | pci_mmcfg_config[i].pci_segment); |
144 | pci_mmcfg_arch_free(); | ||
144 | return 0; | 145 | return 0; |
145 | } | 146 | } |
146 | } | 147 | } |
147 | raw_pci_ext_ops = &pci_mmcfg; | 148 | raw_pci_ext_ops = &pci_mmcfg; |
148 | return 1; | 149 | return 1; |
149 | } | 150 | } |
151 | |||
152 | void __init pci_mmcfg_arch_free(void) | ||
153 | { | ||
154 | int i; | ||
155 | |||
156 | if (pci_mmcfg_virt == NULL) | ||
157 | return; | ||
158 | |||
159 | for (i = 0; i < pci_mmcfg_config_num; ++i) { | ||
160 | if (pci_mmcfg_virt[i].virt) { | ||
161 | iounmap(pci_mmcfg_virt[i].virt); | ||
162 | pci_mmcfg_virt[i].virt = NULL; | ||
163 | pci_mmcfg_virt[i].cfg = NULL; | ||
164 | } | ||
165 | } | ||
166 | |||
167 | kfree(pci_mmcfg_virt); | ||
168 | pci_mmcfg_virt = NULL; | ||
169 | } | ||
diff --git a/arch/x86/pci/mp_bus_to_node.c b/arch/x86/pci/mp_bus_to_node.c new file mode 100644 index 000000000000..022943999b84 --- /dev/null +++ b/arch/x86/pci/mp_bus_to_node.c | |||
@@ -0,0 +1,23 @@ | |||
1 | #include <linux/pci.h> | ||
2 | #include <linux/init.h> | ||
3 | #include <linux/topology.h> | ||
4 | |||
5 | #define BUS_NR 256 | ||
6 | |||
7 | static unsigned char mp_bus_to_node[BUS_NR]; | ||
8 | |||
9 | void set_mp_bus_to_node(int busnum, int node) | ||
10 | { | ||
11 | if (busnum >= 0 && busnum < BUS_NR) | ||
12 | mp_bus_to_node[busnum] = (unsigned char) node; | ||
13 | } | ||
14 | |||
15 | int get_mp_bus_to_node(int busnum) | ||
16 | { | ||
17 | int node; | ||
18 | |||
19 | if (busnum < 0 || busnum > (BUS_NR - 1)) | ||
20 | return 0; | ||
21 | node = mp_bus_to_node[busnum]; | ||
22 | return node; | ||
23 | } | ||
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index 7d84e813e958..c58805a92db5 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h | |||
@@ -26,6 +26,7 @@ | |||
26 | #define PCI_ASSIGN_ALL_BUSSES 0x4000 | 26 | #define PCI_ASSIGN_ALL_BUSSES 0x4000 |
27 | #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 | 27 | #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 |
28 | #define PCI_USE__CRS 0x10000 | 28 | #define PCI_USE__CRS 0x10000 |
29 | #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 | ||
29 | 30 | ||
30 | extern unsigned int pci_probe; | 31 | extern unsigned int pci_probe; |
31 | extern unsigned long pirq_table_addr; | 32 | extern unsigned long pirq_table_addr; |
@@ -97,12 +98,12 @@ extern struct pci_raw_ops pci_direct_conf1; | |||
97 | extern int pci_direct_probe(void); | 98 | extern int pci_direct_probe(void); |
98 | extern void pci_direct_init(int type); | 99 | extern void pci_direct_init(int type); |
99 | extern void pci_pcbios_init(void); | 100 | extern void pci_pcbios_init(void); |
100 | extern void pci_mmcfg_init(int type); | ||
101 | extern void pci_olpc_init(void); | 101 | extern void pci_olpc_init(void); |
102 | 102 | ||
103 | /* pci-mmconfig.c */ | 103 | /* pci-mmconfig.c */ |
104 | 104 | ||
105 | extern int __init pci_mmcfg_arch_init(void); | 105 | extern int __init pci_mmcfg_arch_init(void); |
106 | extern void __init pci_mmcfg_arch_free(void); | ||
106 | 107 | ||
107 | /* | 108 | /* |
108 | * AMD Fam10h CPUs are buggy, and cannot access MMIO config space | 109 | * AMD Fam10h CPUs are buggy, and cannot access MMIO config space |
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 2d1955c11833..a6dbcf4d9ef5 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c | |||
@@ -35,6 +35,7 @@ | |||
35 | #ifdef CONFIG_X86 | 35 | #ifdef CONFIG_X86 |
36 | #include <asm/mpspec.h> | 36 | #include <asm/mpspec.h> |
37 | #endif | 37 | #endif |
38 | #include <linux/pci.h> | ||
38 | #include <acpi/acpi_bus.h> | 39 | #include <acpi/acpi_bus.h> |
39 | #include <acpi/acpi_drivers.h> | 40 | #include <acpi/acpi_drivers.h> |
40 | 41 | ||
@@ -784,6 +785,7 @@ static int __init acpi_init(void) | |||
784 | result = acpi_bus_init(); | 785 | result = acpi_bus_init(); |
785 | 786 | ||
786 | if (!result) { | 787 | if (!result) { |
788 | pci_mmcfg_late_init(); | ||
787 | if (!(pm_flags & PM_APM)) | 789 | if (!(pm_flags & PM_APM)) |
788 | pm_flags |= PM_ACPI; | 790 | pm_flags |= PM_ACPI; |
789 | else { | 791 | else { |
diff --git a/drivers/base/core.c b/drivers/base/core.c index 9248e0927d08..be288b5e4180 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c | |||
@@ -787,6 +787,10 @@ int device_add(struct device *dev) | |||
787 | parent = get_device(dev->parent); | 787 | parent = get_device(dev->parent); |
788 | setup_parent(dev, parent); | 788 | setup_parent(dev, parent); |
789 | 789 | ||
790 | /* use parent numa_node */ | ||
791 | if (parent) | ||
792 | set_dev_node(dev, dev_to_node(parent)); | ||
793 | |||
790 | /* first, register with generic layer. */ | 794 | /* first, register with generic layer. */ |
791 | error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id); | 795 | error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id); |
792 | if (error) | 796 | if (error) |
@@ -1306,8 +1310,11 @@ int device_move(struct device *dev, struct device *new_parent) | |||
1306 | dev->parent = new_parent; | 1310 | dev->parent = new_parent; |
1307 | if (old_parent) | 1311 | if (old_parent) |
1308 | klist_remove(&dev->knode_parent); | 1312 | klist_remove(&dev->knode_parent); |
1309 | if (new_parent) | 1313 | if (new_parent) { |
1310 | klist_add_tail(&dev->knode_parent, &new_parent->klist_children); | 1314 | klist_add_tail(&dev->knode_parent, &new_parent->klist_children); |
1315 | set_dev_node(dev, dev_to_node(new_parent)); | ||
1316 | } | ||
1317 | |||
1311 | if (!dev->class) | 1318 | if (!dev->class) |
1312 | goto out_put; | 1319 | goto out_put; |
1313 | error = device_move_class_links(dev, old_parent, new_parent); | 1320 | error = device_move_class_links(dev, old_parent, new_parent); |
@@ -1317,9 +1324,12 @@ int device_move(struct device *dev, struct device *new_parent) | |||
1317 | if (!kobject_move(&dev->kobj, &old_parent->kobj)) { | 1324 | if (!kobject_move(&dev->kobj, &old_parent->kobj)) { |
1318 | if (new_parent) | 1325 | if (new_parent) |
1319 | klist_remove(&dev->knode_parent); | 1326 | klist_remove(&dev->knode_parent); |
1320 | if (old_parent) | 1327 | dev->parent = old_parent; |
1328 | if (old_parent) { | ||
1321 | klist_add_tail(&dev->knode_parent, | 1329 | klist_add_tail(&dev->knode_parent, |
1322 | &old_parent->klist_children); | 1330 | &old_parent->klist_children); |
1331 | set_dev_node(dev, dev_to_node(old_parent)); | ||
1332 | } | ||
1323 | } | 1333 | } |
1324 | cleanup_glue_dir(dev, new_parent_kobj); | 1334 | cleanup_glue_dir(dev, new_parent_kobj); |
1325 | put_device(new_parent); | 1335 | put_device(new_parent); |
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index f991359f0c36..4a55bf380957 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c | |||
@@ -842,11 +842,14 @@ static void set_pcie_port_type(struct pci_dev *pdev) | |||
842 | * reading the dword at 0x100 which must either be 0 or a valid extended | 842 | * reading the dword at 0x100 which must either be 0 or a valid extended |
843 | * capability header. | 843 | * capability header. |
844 | */ | 844 | */ |
845 | int pci_cfg_space_size(struct pci_dev *dev) | 845 | int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix) |
846 | { | 846 | { |
847 | int pos; | 847 | int pos; |
848 | u32 status; | 848 | u32 status; |
849 | 849 | ||
850 | if (!check_exp_pcix) | ||
851 | goto skip; | ||
852 | |||
850 | pos = pci_find_capability(dev, PCI_CAP_ID_EXP); | 853 | pos = pci_find_capability(dev, PCI_CAP_ID_EXP); |
851 | if (!pos) { | 854 | if (!pos) { |
852 | pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); | 855 | pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); |
@@ -858,6 +861,7 @@ int pci_cfg_space_size(struct pci_dev *dev) | |||
858 | goto fail; | 861 | goto fail; |
859 | } | 862 | } |
860 | 863 | ||
864 | skip: | ||
861 | if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL) | 865 | if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL) |
862 | goto fail; | 866 | goto fail; |
863 | if (status == 0xffffffff) | 867 | if (status == 0xffffffff) |
@@ -869,6 +873,11 @@ int pci_cfg_space_size(struct pci_dev *dev) | |||
869 | return PCI_CFG_SPACE_SIZE; | 873 | return PCI_CFG_SPACE_SIZE; |
870 | } | 874 | } |
871 | 875 | ||
876 | int pci_cfg_space_size(struct pci_dev *dev) | ||
877 | { | ||
878 | return pci_cfg_space_size_ext(dev, 1); | ||
879 | } | ||
880 | |||
872 | static void pci_release_bus_bridge_dev(struct device *dev) | 881 | static void pci_release_bus_bridge_dev(struct device *dev) |
873 | { | 882 | { |
874 | kfree(dev); | 883 | kfree(dev); |
@@ -964,7 +973,6 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) | |||
964 | dev->dev.release = pci_release_dev; | 973 | dev->dev.release = pci_release_dev; |
965 | pci_dev_get(dev); | 974 | pci_dev_get(dev); |
966 | 975 | ||
967 | set_dev_node(&dev->dev, pcibus_to_node(bus)); | ||
968 | dev->dev.dma_mask = &dev->dma_mask; | 976 | dev->dev.dma_mask = &dev->dma_mask; |
969 | dev->dev.dma_parms = &dev->dma_parms; | 977 | dev->dev.dma_parms = &dev->dma_parms; |
970 | dev->dev.coherent_dma_mask = 0xffffffffull; | 978 | dev->dev.coherent_dma_mask = 0xffffffffull; |
@@ -1080,6 +1088,10 @@ unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) | |||
1080 | return max; | 1088 | return max; |
1081 | } | 1089 | } |
1082 | 1090 | ||
1091 | void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) | ||
1092 | { | ||
1093 | } | ||
1094 | |||
1083 | struct pci_bus * pci_create_bus(struct device *parent, | 1095 | struct pci_bus * pci_create_bus(struct device *parent, |
1084 | int bus, struct pci_ops *ops, void *sysdata) | 1096 | int bus, struct pci_ops *ops, void *sysdata) |
1085 | { | 1097 | { |
@@ -1119,6 +1131,9 @@ struct pci_bus * pci_create_bus(struct device *parent, | |||
1119 | goto dev_reg_err; | 1131 | goto dev_reg_err; |
1120 | b->bridge = get_device(dev); | 1132 | b->bridge = get_device(dev); |
1121 | 1133 | ||
1134 | if (!parent) | ||
1135 | set_dev_node(b->bridge, pcibus_to_node(b)); | ||
1136 | |||
1122 | b->dev.class = &pcibus_class; | 1137 | b->dev.class = &pcibus_class; |
1123 | b->dev.parent = b->bridge; | 1138 | b->dev.parent = b->bridge; |
1124 | sprintf(b->dev.bus_id, "%04x:%02x", pci_domain_nr(b), bus); | 1139 | sprintf(b->dev.bus_id, "%04x:%02x", pci_domain_nr(b), bus); |
@@ -1136,6 +1151,8 @@ struct pci_bus * pci_create_bus(struct device *parent, | |||
1136 | b->resource[0] = &ioport_resource; | 1151 | b->resource[0] = &ioport_resource; |
1137 | b->resource[1] = &iomem_resource; | 1152 | b->resource[1] = &iomem_resource; |
1138 | 1153 | ||
1154 | set_pci_bus_resources_arch_default(b); | ||
1155 | |||
1139 | return b; | 1156 | return b; |
1140 | 1157 | ||
1141 | dev_create_file_err: | 1158 | dev_create_file_err: |
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h index ddd8e248fc0a..30bbde0cb34b 100644 --- a/include/asm-x86/pci.h +++ b/include/asm-x86/pci.h | |||
@@ -19,6 +19,8 @@ struct pci_sysdata { | |||
19 | }; | 19 | }; |
20 | 20 | ||
21 | /* scan a bus after allocating a pci_sysdata for it */ | 21 | /* scan a bus after allocating a pci_sysdata for it */ |
22 | extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, | ||
23 | int node); | ||
22 | extern struct pci_bus *pci_scan_bus_with_sysdata(int busno); | 24 | extern struct pci_bus *pci_scan_bus_with_sysdata(int busno); |
23 | 25 | ||
24 | static inline int pci_domain_nr(struct pci_bus *bus) | 26 | static inline int pci_domain_nr(struct pci_bus *bus) |
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index 22073268b481..0e6d6b03affe 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h | |||
@@ -193,9 +193,25 @@ extern cpumask_t cpu_coregroup_map(int cpu); | |||
193 | #define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) | 193 | #define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) |
194 | #endif | 194 | #endif |
195 | 195 | ||
196 | struct pci_bus; | ||
197 | void set_pci_bus_resources_arch_default(struct pci_bus *b); | ||
198 | |||
196 | #ifdef CONFIG_SMP | 199 | #ifdef CONFIG_SMP |
197 | #define mc_capable() (boot_cpu_data.x86_max_cores > 1) | 200 | #define mc_capable() (boot_cpu_data.x86_max_cores > 1) |
198 | #define smt_capable() (smp_num_siblings > 1) | 201 | #define smt_capable() (smp_num_siblings > 1) |
199 | #endif | 202 | #endif |
200 | 203 | ||
204 | #ifdef CONFIG_NUMA | ||
205 | extern int get_mp_bus_to_node(int busnum); | ||
206 | extern void set_mp_bus_to_node(int busnum, int node); | ||
207 | #else | ||
208 | static inline int get_mp_bus_to_node(int busnum) | ||
209 | { | ||
210 | return 0; | ||
211 | } | ||
212 | static inline void set_mp_bus_to_node(int busnum, int node) | ||
213 | { | ||
214 | } | ||
215 | #endif | ||
216 | |||
201 | #endif | 217 | #endif |
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 2c7e003356ac..41f7ce7edd7a 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h | |||
@@ -79,6 +79,7 @@ typedef int (*acpi_table_handler) (struct acpi_table_header *table); | |||
79 | typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); | 79 | typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); |
80 | 80 | ||
81 | char * __acpi_map_table (unsigned long phys_addr, unsigned long size); | 81 | char * __acpi_map_table (unsigned long phys_addr, unsigned long size); |
82 | int early_acpi_boot_init(void); | ||
82 | int acpi_boot_init (void); | 83 | int acpi_boot_init (void); |
83 | int acpi_boot_table_init (void); | 84 | int acpi_boot_table_init (void); |
84 | int acpi_numa_init (void); | 85 | int acpi_numa_init (void); |
@@ -235,6 +236,10 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n, | |||
235 | 236 | ||
236 | #else /* CONFIG_ACPI */ | 237 | #else /* CONFIG_ACPI */ |
237 | 238 | ||
239 | static inline int early_acpi_boot_init(void) | ||
240 | { | ||
241 | return 0; | ||
242 | } | ||
238 | static inline int acpi_boot_init(void) | 243 | static inline int acpi_boot_init(void) |
239 | { | 244 | { |
240 | return 0; | 245 | return 0; |
diff --git a/include/linux/pci.h b/include/linux/pci.h index 292491324b01..abc998ffb66e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h | |||
@@ -254,7 +254,7 @@ static inline void pci_add_saved_cap(struct pci_dev *pci_dev, | |||
254 | #define PCI_NUM_RESOURCES 11 | 254 | #define PCI_NUM_RESOURCES 11 |
255 | 255 | ||
256 | #ifndef PCI_BUS_NUM_RESOURCES | 256 | #ifndef PCI_BUS_NUM_RESOURCES |
257 | #define PCI_BUS_NUM_RESOURCES 8 | 257 | #define PCI_BUS_NUM_RESOURCES 16 |
258 | #endif | 258 | #endif |
259 | 259 | ||
260 | #define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ | 260 | #define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ |
@@ -666,6 +666,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, | |||
666 | 666 | ||
667 | void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), | 667 | void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), |
668 | void *userdata); | 668 | void *userdata); |
669 | int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix); | ||
669 | int pci_cfg_space_size(struct pci_dev *dev); | 670 | int pci_cfg_space_size(struct pci_dev *dev); |
670 | unsigned char pci_bus_max_busnr(struct pci_bus *bus); | 671 | unsigned char pci_bus_max_busnr(struct pci_bus *bus); |
671 | 672 | ||
@@ -1053,5 +1054,13 @@ extern unsigned long pci_cardbus_mem_size; | |||
1053 | 1054 | ||
1054 | extern int pcibios_add_platform_entries(struct pci_dev *dev); | 1055 | extern int pcibios_add_platform_entries(struct pci_dev *dev); |
1055 | 1056 | ||
1057 | #ifdef CONFIG_PCI_MMCONFIG | ||
1058 | extern void __init pci_mmcfg_early_init(void); | ||
1059 | extern void __init pci_mmcfg_late_init(void); | ||
1060 | #else | ||
1061 | static inline void pci_mmcfg_early_init(void) { } | ||
1062 | static inline void pci_mmcfg_late_init(void) { } | ||
1063 | #endif | ||
1064 | |||
1056 | #endif /* __KERNEL__ */ | 1065 | #endif /* __KERNEL__ */ |
1057 | #endif /* LINUX_PCI_H */ | 1066 | #endif /* LINUX_PCI_H */ |