2 files changed, 81 insertions, 5 deletions

diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h
index 2fd3d251d9a5..2c894b600e5b 100644
--- a/include/sound/pxa2xx-lib.h
+++ b/include/sound/pxa2xx-lib.h
@@ -42,4 +42,19 @@ extern int pxa2xx_ac97_hw_resume(void);
 extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
 extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
 
+/* AC97 platform_data */
+/**
+ * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+ *
+ * Platform data should only be specified for pxa27x CPUs where a silicon bug
+ * prevents correct operation of the reset line. If not specified, the default
+ * behaviour is to consider gpio 113 as the AC97 reset line, which is the
+ * default on most boards.
+ */
+struct pxa2xx_ac97_platform_data {
+        int reset_gpio;
+};
+
 #endif
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 35afd0c33be5..d721ea7cae8f 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -31,6 +31,7 @@ static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
 static volatile long gsr_bits;
 static struct clk *ac97_clk;
 static struct clk *ac97conf_clk;
+static int reset_gpio;
 
 /*
  * Beware PXA27x bugs:
@@ -42,6 +43,45 @@ static struct clk *ac97conf_clk;
  * 1 jiffy timeout if interrupt never comes).
  */
 
+enum {
+        RESETGPIO_FORCE_HIGH,
+        RESETGPIO_FORCE_LOW,
+        RESETGPIO_NORMAL_ALTFUNC
+};
+
+/**
+ * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
+ * @mode: chosen action
+ *
+ * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
+ * must be done to insure proper work of AC97 reset line.  This function
+ * computes the correct gpio_mode for further use by reset functions, and
+ * applied the change through pxa_gpio_mode.
+ */
+static void set_resetgpio_mode(int resetgpio_action)
+{
+        int mode = 0;
+
+        if (reset_gpio)
+                switch (resetgpio_action) {
+                case RESETGPIO_NORMAL_ALTFUNC:
+                        if (reset_gpio == 113)
+                                mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+                        if (reset_gpio == 95)
+                                mode = 95 | GPIO_ALT_FN_1_OUT;
+                        break;
+                case RESETGPIO_FORCE_LOW:
+                        mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
+                        break;
+                case RESETGPIO_FORCE_HIGH:
+                        mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
+                        break;
+                };
+
+        if (mode)
+                pxa_gpio_mode(mode);
+}
+
 unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 {
         unsigned short val = -1;
@@ -137,10 +177,10 @@ static inline void pxa_ac97_warm_pxa27x(void)
 
         /* warm reset broken on Bulverde,
            so manually keep AC97 reset high */
-        pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
+        set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
         udelay(10);
         GCR |= GCR_WARM_RST;
-        pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+        set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
         udelay(500);
 }
 
@@ -308,8 +348,8 @@ int pxa2xx_ac97_hw_resume(void)
                 pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
         }
         if (cpu_is_pxa27x()) {
-                /* Use GPIO 113 as AC97 Reset on Bulverde */
-                pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+                /* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
+                set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
         }
         clk_enable(ac97_clk);
         return 0;
@@ -320,6 +360,27 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
 int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 {
         int ret;
+        struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;
+
+        if (pdata) {
+                switch (pdata->reset_gpio) {
+                case 95:
+                case 113:
+                        reset_gpio = pdata->reset_gpio;
+                        break;
+                case 0:
+                        reset_gpio = 113;
+                        break;
+                case -1:
+                        break;
+                default:
+                        dev_err(dev, "Invalid reset GPIO %d\n",
+                                pdata->reset_gpio);
+                }
+        } else {
+                if (cpu_is_pxa27x())
+                        reset_gpio = 113;
+        }
 
         if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
                 pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
@@ -330,7 +391,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 
         if (cpu_is_pxa27x()) {
                 /* Use GPIO 113 as AC97 Reset on Bulverde */
-                pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+                set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
                 ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
                 if (IS_ERR(ac97conf_clk)) {
                         ret = PTR_ERR(ac97conf_clk);