diff options
-rw-r--r-- | drivers/ata/ata_piix.c | 18 |
1 files changed, 15 insertions, 3 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index aadfcb3ceb1b..33bbeac785cc 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c | |||
@@ -118,7 +118,7 @@ enum { | |||
118 | PIIX_80C_SEC = (1 << 7) | (1 << 6), | 118 | PIIX_80C_SEC = (1 << 7) | (1 << 6), |
119 | 119 | ||
120 | /* controller IDs */ | 120 | /* controller IDs */ |
121 | piix_pata_33 = 0, /* PIIX3 or 4 at 33Mhz */ | 121 | piix_pata_33 = 0, /* PIIX4 at 33Mhz */ |
122 | ich_pata_33 = 1, /* ICH up to UDMA 33 only */ | 122 | ich_pata_33 = 1, /* ICH up to UDMA 33 only */ |
123 | ich_pata_66 = 2, /* ICH up to 66 Mhz */ | 123 | ich_pata_66 = 2, /* ICH up to 66 Mhz */ |
124 | ich_pata_100 = 3, /* ICH up to UDMA 100 */ | 124 | ich_pata_100 = 3, /* ICH up to UDMA 100 */ |
@@ -128,6 +128,7 @@ enum { | |||
128 | ich6_sata_ahci = 7, | 128 | ich6_sata_ahci = 7, |
129 | ich6m_sata_ahci = 8, | 129 | ich6m_sata_ahci = 8, |
130 | ich8_sata_ahci = 9, | 130 | ich8_sata_ahci = 9, |
131 | piix_pata_mwdma = 10, /* PIIX3 MWDMA only */ | ||
131 | 132 | ||
132 | /* constants for mapping table */ | 133 | /* constants for mapping table */ |
133 | P0 = 0, /* port 0 */ | 134 | P0 = 0, /* port 0 */ |
@@ -165,6 +166,8 @@ static unsigned int in_module_init = 1; | |||
165 | 166 | ||
166 | static const struct pci_device_id piix_pci_tbl[] = { | 167 | static const struct pci_device_id piix_pci_tbl[] = { |
167 | #ifdef ATA_ENABLE_PATA | 168 | #ifdef ATA_ENABLE_PATA |
169 | /* Intel PIIX3 for the 430HX etc */ | ||
170 | { 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma }, | ||
168 | /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ | 171 | /* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */ |
169 | /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ | 172 | /* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */ |
170 | { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, | 173 | { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 }, |
@@ -441,7 +444,7 @@ static const struct piix_map_db *piix_map_db_table[] = { | |||
441 | }; | 444 | }; |
442 | 445 | ||
443 | static struct ata_port_info piix_port_info[] = { | 446 | static struct ata_port_info piix_port_info[] = { |
444 | /* piix_pata_33: 0: PIIX3 or 4 at 33MHz */ | 447 | /* piix_pata_33: 0: PIIX4 at 33MHz */ |
445 | { | 448 | { |
446 | .sht = &piix_sht, | 449 | .sht = &piix_sht, |
447 | .flags = PIIX_PATA_FLAGS, | 450 | .flags = PIIX_PATA_FLAGS, |
@@ -543,6 +546,14 @@ static struct ata_port_info piix_port_info[] = { | |||
543 | .port_ops = &piix_sata_ops, | 546 | .port_ops = &piix_sata_ops, |
544 | }, | 547 | }, |
545 | 548 | ||
549 | /* piix_pata_mwdma: 10: PIIX3 MWDMA only */ | ||
550 | { | ||
551 | .sht = &piix_sht, | ||
552 | .flags = PIIX_PATA_FLAGS, | ||
553 | .pio_mask = 0x1f, /* pio0-4 */ | ||
554 | .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ | ||
555 | .port_ops = &piix_pata_ops, | ||
556 | }, | ||
546 | }; | 557 | }; |
547 | 558 | ||
548 | static struct pci_bits piix_enable_bits[] = { | 559 | static struct pci_bits piix_enable_bits[] = { |
@@ -787,7 +798,8 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i | |||
787 | { 2, 3 }, }; | 798 | { 2, 3 }, }; |
788 | 799 | ||
789 | pci_read_config_word(dev, master_port, &master_data); | 800 | pci_read_config_word(dev, master_port, &master_data); |
790 | pci_read_config_byte(dev, 0x48, &udma_enable); | 801 | if (ap->udma_mask) |
802 | pci_read_config_byte(dev, 0x48, &udma_enable); | ||
791 | 803 | ||
792 | if (speed >= XFER_UDMA_0) { | 804 | if (speed >= XFER_UDMA_0) { |
793 | unsigned int udma = adev->dma_mode - XFER_UDMA_0; | 805 | unsigned int udma = adev->dma_mode - XFER_UDMA_0; |