4 files changed, 304 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 78c237f8fa0a..d9f86e9d405b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -94,6 +94,16 @@ config SENSORS_ADM9240
           This driver can also be built as a module.  If so, the module
           will be called adm9240.
 
+config SENSORS_K8TEMP
+        tristate "AMD K8 processor sensor"
+        depends on HWMON && X86 && PCI && EXPERIMENTAL
+        help
+          If you say yes here you get support for the temperature
+          sensor(s) inside your AMD K8 CPU.
+
+          This driver can also be built as a module.  If so, the module
+          will be called k8temp.
+
 config SENSORS_ASB100
         tristate "Asus ASB100 Bach"
         depends on HWMON && I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 31415843a91a..aab4c1063059 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)   += gl520sm.o
 obj-$(CONFIG_SENSORS_HDAPS)     += hdaps.o
 obj-$(CONFIG_SENSORS_IT87)      += it87.o
+obj-$(CONFIG_SENSORS_K8TEMP)    += k8temp.o
 obj-$(CONFIG_SENSORS_LM63)      += lm63.o
 obj-$(CONFIG_SENSORS_LM70)      += lm70.o
 obj-$(CONFIG_SENSORS_LM75)      += lm75.o
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
new file mode 100644
index 000000000000..50162ffa8832
--- /dev/null
+++ b/drivers/hwmon/k8temp.c
@@ -0,0 +1,292 @@
+/*
+ * k8temp.c - Linux kernel module for hardware monitoring
+ *
+ * Copyright (C) 2006 Rudolf Marek <r.marek@sh.cvut.cz>
+ *
+ * Inspired from the w83785 and amd756 drivers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/pci.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+#define TEMP_FROM_REG(val)      (((((val) >> 16) & 0xff) - 49) * 1000)
+#define REG_TEMP        0xe4
+#define SEL_PLACE       0x40
+#define SEL_CORE        0x04
+
+struct k8temp_data {
+        struct class_device *class_dev;
+        struct mutex update_lock;
+        const char *name;
+        char valid;             /* zero until following fields are valid */
+        unsigned long last_updated;     /* in jiffies */
+
+        /* registers values */
+        u8 sensorsp;            /* sensor presence bits - SEL_CORE & SEL_PLACE */
+        u32 temp[2][2];         /* core, place */
+};
+
+static struct k8temp_data *k8temp_update_device(struct device *dev)
+{
+        struct k8temp_data *data = dev_get_drvdata(dev);
+        struct pci_dev *pdev = to_pci_dev(dev);
+        u8 tmp;
+
+        mutex_lock(&data->update_lock);
+
+        if (!data->valid
+            || time_after(jiffies, data->last_updated + HZ)) {
+                pci_read_config_byte(pdev, REG_TEMP, &tmp);
+                tmp &= ~(SEL_PLACE | SEL_CORE);         /* Select sensor 0, core0 */
+                pci_write_config_byte(pdev, REG_TEMP, tmp);
+                pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);
+
+                if (data->sensorsp & SEL_PLACE) {
+                        tmp |= SEL_PLACE;       /* Select sensor 1, core0 */
+                        pci_write_config_byte(pdev, REG_TEMP, tmp);
+                        pci_read_config_dword(pdev, REG_TEMP,
+                                              &data->temp[0][1]);
+                }
+
+                if (data->sensorsp & SEL_CORE) {
+                        tmp &= ~SEL_PLACE;      /* Select sensor 0, core1 */
+                        tmp |= SEL_CORE;
+                        pci_write_config_byte(pdev, REG_TEMP, tmp);
+                        pci_read_config_dword(pdev, REG_TEMP,
+                                              &data->temp[1][0]);
+
+                        if (data->sensorsp & SEL_PLACE) {
+                                tmp |= SEL_PLACE;       /* Select sensor 1, core1 */
+                                pci_write_config_byte(pdev, REG_TEMP, tmp);
+                                pci_read_config_dword(pdev, REG_TEMP,
+                                                      &data->temp[1][1]);
+                        }
+                }
+
+                data->last_updated = jiffies;
+                data->valid = 1;
+        }
+
+        mutex_unlock(&data->update_lock);
+        return data;
+}
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+                         *devattr, char *buf)
+{
+        struct k8temp_data *data = dev_get_drvdata(dev);
+
+        return sprintf(buf, "%s\n", data->name);
+}
+
+
+static ssize_t show_temp(struct device *dev,
+                         struct device_attribute *devattr, char *buf)
+{
+        struct sensor_device_attribute_2 *attr =
+            to_sensor_dev_attr_2(devattr);
+        int core = attr->nr;
+        int place = attr->index;
+        struct k8temp_data *data = k8temp_update_device(dev);
+
+        return sprintf(buf, "%d\n",
+                       TEMP_FROM_REG(data->temp[core][place]));
+}
+
+/* core, place */
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct pci_device_id k8temp_ids[] = {
+        { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
+        { 0 },
+};
+
+static int __devinit k8temp_probe(struct pci_dev *pdev,
+                                  const struct pci_device_id *id)
+{
+        int err;
+        u8 scfg;
+        u32 temp;
+        struct k8temp_data *data;
+        u32 cpuid = cpuid_eax(1);
+
+        /* this feature should be available since SH-C0 core */
+        if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) {
+                err = -ENODEV;
+                goto exit;
+        }
+
+        if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
+                err = -ENOMEM;
+                goto exit;
+        }
+
+        pci_read_config_byte(pdev, REG_TEMP, &scfg);
+        scfg &= ~(SEL_PLACE | SEL_CORE);                /* Select sensor 0, core0 */
+        pci_write_config_byte(pdev, REG_TEMP, scfg);
+        pci_read_config_byte(pdev, REG_TEMP, &scfg);
+
+        if (scfg & (SEL_PLACE | SEL_CORE)) {
+                dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n");
+                err = -ENODEV;
+                goto exit_free;
+        }
+
+        scfg |= (SEL_PLACE | SEL_CORE);
+        pci_write_config_byte(pdev, REG_TEMP, scfg);
+
+        /* now we know if we can change core and/or sensor */
+        pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp);
+
+        if (data->sensorsp & SEL_PLACE) {
+                scfg &= ~SEL_CORE;      /* Select sensor 1, core0 */
+                pci_write_config_byte(pdev, REG_TEMP, scfg);
+                pci_read_config_dword(pdev, REG_TEMP, &temp);
+                scfg |= SEL_CORE;       /* prepare for next selection */
+                if (!((temp >> 16) & 0xff))     /* if temp is 0 -49C is not likely */
+                        data->sensorsp &= ~SEL_PLACE;
+        }
+
+        if (data->sensorsp & SEL_CORE) {
+                scfg &= ~SEL_PLACE;     /* Select sensor 0, core1 */
+                pci_write_config_byte(pdev, REG_TEMP, scfg);
+                pci_read_config_dword(pdev, REG_TEMP, &temp);
+                if (!((temp >> 16) & 0xff))     /* if temp is 0 -49C is not likely */
+                        data->sensorsp &= ~SEL_CORE;
+        }
+
+        data->name = "k8temp";
+        mutex_init(&data->update_lock);
+        dev_set_drvdata(&pdev->dev, data);
+
+        /* Register sysfs hooks */
+        err = device_create_file(&pdev->dev,
+                           &sensor_dev_attr_temp1_input.dev_attr);
+        if (err)
+                goto exit_remove;
+
+        /* sensor can be changed and reports something */
+        if (data->sensorsp & SEL_PLACE) {
+                err = device_create_file(&pdev->dev,
+                                   &sensor_dev_attr_temp2_input.dev_attr);
+                if (err)
+                        goto exit_remove;
+        }
+
+        /* core can be changed and reports something */
+        if (data->sensorsp & SEL_CORE) {
+                err = device_create_file(&pdev->dev,
+                                   &sensor_dev_attr_temp3_input.dev_attr);
+                if (err)
+                        goto exit_remove;
+                if (data->sensorsp & SEL_PLACE)
+                        err = device_create_file(&pdev->dev,
+                                           &sensor_dev_attr_temp4_input.
+                                           dev_attr);
+                        if (err)
+                                goto exit_remove;
+        }
+
+        err = device_create_file(&pdev->dev, &dev_attr_name);
+        if (err)
+                goto exit_remove;
+
+        data->class_dev = hwmon_device_register(&pdev->dev);
+
+        if (IS_ERR(data->class_dev)) {
+                err = PTR_ERR(data->class_dev);
+                goto exit_remove;
+        }
+
+        return 0;
+
+exit_remove:
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp1_input.dev_attr);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp2_input.dev_attr);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp3_input.dev_attr);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp4_input.dev_attr);
+        device_remove_file(&pdev->dev, &dev_attr_name);
+exit_free:
+        dev_set_drvdata(&pdev->dev, NULL);
+        kfree(data);
+exit:
+        return err;
+}
+
+static void __devexit k8temp_remove(struct pci_dev *pdev)
+{
+        struct k8temp_data *data = dev_get_drvdata(&pdev->dev);
+
+        hwmon_device_unregister(data->class_dev);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp1_input.dev_attr);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp2_input.dev_attr);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp3_input.dev_attr);
+        device_remove_file(&pdev->dev,
+                           &sensor_dev_attr_temp4_input.dev_attr);
+        device_remove_file(&pdev->dev, &dev_attr_name);
+        dev_set_drvdata(&pdev->dev, NULL);
+        kfree(data);
+}
+
+static struct pci_driver k8temp_driver = {
+        .name = "k8temp",
+        .id_table = k8temp_ids,
+        .probe = k8temp_probe,
+        .remove = __devexit_p(k8temp_remove),
+};
+
+static int __init k8temp_init(void)
+{
+        return pci_register_driver(&k8temp_driver);
+}
+
+static void __exit k8temp_exit(void)
+{
+        pci_unregister_driver(&k8temp_driver);
+}
+
+MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_DESCRIPTION("AMD K8 core temperature monitor");
+MODULE_LICENSE("GPL");
+
+module_init(k8temp_init)
+module_exit(k8temp_exit)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ab032ceafa84..61db1907f06f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -479,6 +479,7 @@
 
 #define PCI_VENDOR_ID_AMD               0x1022
 #define PCI_DEVICE_ID_AMD_K8_NB         0x1100
+#define PCI_DEVICE_ID_AMD_K8_NB_MISC    0x1103
 #define PCI_DEVICE_ID_AMD_LANCE         0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME    0x2001
 #define PCI_DEVICE_ID_AMD_SCSI          0x2020