22 files changed, 32 insertions, 32 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 731c3d5da0dc..88f462122a30 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -64,7 +64,7 @@ config DELL_RBU
         help
          Say m if you want to have the option of updating the BIOS for your
          DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
-         supporting application to comunicate with the BIOS regarding the new
+         supporting application to communicate with the BIOS regarding the new
          image for the image update to take effect.
          See <file:Documentation/dell_rbu.txt> for more details on the driver.
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 0d9667921f61..510816c16da3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -333,10 +333,10 @@ config I2C_PARPORT_LIGHT
 
           This driver is a light version of i2c-parport.  It doesn't depend
           on the parport driver, and uses direct I/O access instead.  This
-          might be prefered on embedded systems where wasting memory for
+          might be preferred on embedded systems where wasting memory for
           the clean but heavy parport handling is not an option.  The
           drawback is a reduced portability and the impossibility to
-          dasiy-chain other parallel port devices.
+          daisy-chain other parallel port devices.
           
           Don't say Y here if you said Y or M to i2c-parport.  Saying M to
           both is possible but both modules should not be loaded at the same
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 2769e505f051..672b92ef9f21 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -140,7 +140,7 @@ config IEEE1394_SBP2_PHYS_DMA
         help
           This builds sbp2 for use with non-OHCI host adapters which do not
           support physical DMA or for when ohci1394 is run with phys_dma=0.
-          Physical DMA is data movement without assistence of the drivers'
+          Physical DMA is data movement without assistance of the drivers'
           interrupt handlers.  This option includes the interrupt handlers
           that are required in absence of this hardware feature.
 
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c62e00c79dec..679bde34d247 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -177,7 +177,7 @@ config KEYBOARD_HIL_OLD
           However, it has been thoroughly tested and is stable.
 
           If you want full HIL support including support for multiple
-          keyboards, mices and tablets, you have to enable the
+          keyboards, mice, and tablets, you have to enable the
           "HP System Device Controller i8042 Support" in the input/serio
           submenu.
 
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 98acf170252c..8cdbfeca5903 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -115,9 +115,9 @@ config HP_SDC
         depends on GSC && SERIO
         default y
         ---help---
-          This option enables supports for the the "System Device
+          This option enables support for the "System Device
           Controller", an i8042 carrying microcode to manage a
-          few miscellanous devices on some Hewlett Packard systems.
+          few miscellaneous devices on some Hewlett Packard systems.
           The SDC itself contains a 10ms resolution timer/clock capable
           of delivering interrupts on a periodic and one-shot basis.
           The SDC may also be connected to a battery-backed real-time
diff --git a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig
index 51e66bc64208..01d4afd9d843 100644
--- a/drivers/isdn/hardware/eicon/Kconfig
+++ b/drivers/isdn/hardware/eicon/Kconfig
@@ -47,7 +47,7 @@ config ISDN_DIVAS_MAINT
         tristate "DIVA Maint driver support"
         depends on ISDN_DIVAS && m
         help
-          Enable Divas Maintainance driver.
+          Enable Divas Maintenance driver.
 
 endmenu
 
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6dfc94122dd9..eb57a988e048 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -321,7 +321,7 @@ config HISAX_HFC_PCI
         help
           This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 
-          For more informations see under
+          For more information see under
           <file:Documentation/isdn/README.hfc-pci>.
 
 config HISAX_W6692
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index d5d649f5ccdb..7f8477d3a661 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -186,7 +186,7 @@ config THERM_ADT746X
         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
         help
           This driver provides some thermostat and fan control for the
-          iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
+          iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
           better fan behaviour by default, and some manual control.
 
 config THERM_PM72
diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
index b5cdd57ec6f5..3d778c5aba68 100644
--- a/drivers/media/dvb/cinergyT2/Kconfig
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -56,7 +56,7 @@ config DVB_CINERGYT2_QUERY_INTERVAL
           measurements.
 
           Please keep in mind that these updates cause traffic on the tuner
-          control bus and thus may or may not affect receiption sensitivity.
+          control bus and thus may or may not affect reception sensitivity.
 
           The default value should be a safe choice for common applications.
 
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d1183c939221..f6779a422f1b 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -351,7 +351,7 @@ config VIDEO_SAA6588
         help
           Support for  Radio Data System (RDS) decoder. This allows seeing
           radio station identification transmitted using this standard.
-          Currentlly, it works only with bt8x8 chips.
+          Currently, it works only with bt8x8 chips.
 
           To compile this driver as a module, choose M here: the
           module will be called saa6588.
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 6d8f30deb868..72e6d73beb40 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -270,7 +270,7 @@ config MTD_JEDEC
         tristate "JEDEC device support"
         depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
         help
-          Enable older older JEDEC flash interface devices for self
+          Enable older JEDEC flash interface devices for self
           programming flash.  It is commonly used in older AMD chips.  It is
           only called JEDEC because the JEDEC association
           <http://www.jedec.org/> distributes the identification codes for the
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c99302ed3823..1831340e5f51 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -21,7 +21,7 @@ config MTD_NAND_VERIFY_WRITE
           NAND flash device internally checks only bits transitioning
           from 1 to 0. There is a rare possibility that even though the
           device thinks the write was successful, a bit could have been
-          flipped accidentaly due to device wear or something else.
+          flipped accidentally due to device wear or something else.
 
 config MTD_NAND_ECC_SMC
         bool "NAND ECC Smart Media byte order"
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 465961b8bcd1..373bddce8f1c 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -21,7 +21,7 @@ config MTD_ONENAND_VERIFY_WRITE
           OneNAND flash device internally checks only bits transitioning
           from 1 to 0. There is a rare possibility that even though the
           device thinks the write was successful, a bit could have been
-          flipped accidentaly due to device wear or something else.
+          flipped accidentally due to device wear or something else.
 
 config MTD_ONENAND_GENERIC
         tristate "OneNAND Flash device via platform device driver"
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index bd4a68c85a47..ece3d9c2dc61 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -301,7 +301,7 @@ config HERMES
         tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
         depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
         ---help---
-          A driver for 802.11b wireless cards based based on the "Hermes" or
+          A driver for 802.11b wireless cards based on the "Hermes" or
           Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
           majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
           - except for the Cisco/Aironet cards.  Cards supported include the
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 0b2d2c3579a7..4142115d298e 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -15,4 +15,4 @@ config RAPIDIO_DISC_TIMEOUT
         default "30"
         ---help---
           Amount of time a discovery node waits for a host to complete
-          enumeration beforing giving up.
+          enumeration before giving up.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index dab082002e6f..8ee2ca1fdab1 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -40,10 +40,10 @@ config SCSI_PROC_FS
         default y
         ---help---
           This option enables support for the various files in
-          /proc/scsi.  In Linux 2.6 this has been superceeded by
+          /proc/scsi.  In Linux 2.6 this has been superseded by
           files in sysfs but many legacy applications rely on this.
 
-          If unusure say Y.
+          If unsure say Y.
 
 comment "SCSI support type (disk, tape, CD-ROM)"
         depends on SCSI
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 7955ebe8e1e8..911ea1756e55 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -22,12 +22,12 @@ config AIC79XX_CMDS_PER_DEVICE
         to be used for any device.  The aic7xxx driver will automatically
         vary this number based on device behavior.  For devices with a
         fixed maximum, the driver will eventually lock to this maximum
-        and display a console message inidicating this value.
+        and display a console message indicating this value.
 
         Due to resource allocation issues in the Linux SCSI mid-layer, using
         a high number of commands per device may result in memory allocation
         failures when many devices are attached to the system.  For this reason,
-        the default is set to 32.  Higher values may result in higer performance
+        the default is set to 32.  Higher values may result in higher performance
         on some devices.  The upper bound is 253.  0 disables tagged queueing.
 
         Per device tag depth can be controlled via the kernel command line
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 5517da5855f0..cd93f9a8611f 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -27,12 +27,12 @@ config AIC7XXX_CMDS_PER_DEVICE
         to be used for any device.  The aic7xxx driver will automatically
         vary this number based on device behavior.  For devices with a
         fixed maximum, the driver will eventually lock to this maximum
-        and display a console message inidicating this value.
+        and display a console message indicating this value.
 
         Due to resource allocation issues in the Linux SCSI mid-layer, using
         a high number of commands per device may result in memory allocation
         failures when many devices are attached to the system.  For this reason,
-        the default is set to 32.  Higher values may result in higer performance
+        the default is set to 32.  Higher values may result in higher performance
         on some devices.  The upper bound is 253.  0 disables tagged queueing.
 
         Per device tag depth can be controlled via the kernel command line
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d926272a40db..653098bc2dd5 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -121,7 +121,7 @@ config SERIAL_8250_RUNTIME_UARTS
         default "4"
         help
           Set this to the maximum number of serial ports you want
-          the kernel to register at boot time.  This can be overriden
+          the kernel to register at boot time.  This can be overridden
           with the module parameter "nr_uarts", or boot-time parameter
           8250.nr_uarts
 
@@ -205,7 +205,7 @@ config SERIAL_8250_BOCA
         depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
         help
           Say Y here if you have a Boca serial board.  Please read the Boca
-          mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto>
+          mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
 
           To compile this driver as a module, choose M here: the module
           will be called 8250_boca.
@@ -667,7 +667,7 @@ config SERIAL_68328
         depends on M68328 || M68EZ328 || M68VZ328
         help
           This driver supports the built-in serial port of the Motorola 68328
-          (standard, EZ and VZ varities).
+          (standard, EZ and VZ varieties).
 
 config SERIAL_68328_RTS_CTS
         bool "Support RTS/CTS on 68328 serial port"
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 422a4b288e34..fe2c4cd53f5a 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -119,7 +119,7 @@ config USB_STORAGE_ALAUDA
           Say Y here to include additional code to support the Olympus MAUSB-10
           and Fujifilm DPC-R1 USB Card reader/writer devices.
 
-          These devices are based on the Alauda chip and support support both
+          These devices are based on the Alauda chip and support both
           XD and SmartMedia cards.
 
 config USB_STORAGE_ONETOUCH
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a1c8923b0bf5..4608a275955f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -403,7 +403,7 @@ config FB_ARC
           is based on the KS-108 lcd controller and is typically a matrix
           of 2*n chips. This driver was tested with a 128x64 panel. This
           driver supports it for use with x86 SBCs through a 16 bit GPIO
-          interface (8 bit data, 8 bit control). If you anticpate using
+          interface (8 bit data, 8 bit control). If you anticipate using
           this driver, say Y or M; otherwise say N. You must specify the
           GPIO IO address to be used for setting control and data.
 
@@ -771,7 +771,7 @@ config FB_RIVA_DEBUG
         default n
         help
           Say Y here if you want the Riva driver to output all sorts
-          of debugging informations to provide to the maintainer when
+          of debugging information to provide to the maintainer when
           something goes wrong.
 
 config FB_RIVA_BACKLIGHT
@@ -865,7 +865,7 @@ config FB_INTEL_DEBUG
         depends on FB_INTEL
         ---help---
           Say Y here if you want the Intel driver to output all sorts
-          of debugging informations to provide to the maintainer when
+          of debugging information to provide to the maintainer when
           something goes wrong.
 
 config FB_INTEL_I2C
@@ -1062,7 +1062,7 @@ config FB_RADEON_DEBUG
         default n
         help
           Say Y here if you want the Radeon driver to output all sorts
-          of debugging informations to provide to the maintainer when
+          of debugging information to provide to the maintainer when
           something goes wrong.
 
 config FB_ATY128
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 8b3d0f0c7bd5..27c9d05d03ef 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -21,7 +21,7 @@ config W1_CON
           There are three types of messages between w1 core and userspace:
           1. Events. They are generated each time new master or slave device found
                 either due to automatic or requested search.
-          2. Userspace commands. Includes read/write and search/alarm search comamnds.
+          2. Userspace commands. Includes read/write and search/alarm search commands.
           3. Replies to userspace commands.
 
 source drivers/w1/masters/Kconfig