1 files changed, 179 insertions, 0 deletions

diff --git a/Documentation/kvm/ppc-pv.txt b/Documentation/kvm/ppc-pv.txt
new file mode 100644
index 000000000000..41ee16d954d7
--- /dev/null
+++ b/Documentation/kvm/ppc-pv.txt
@@ -0,0 +1,179 @@
+The PPC KVM paravirtual interface
+=================================
+
+The basic execution principle by which KVM on PowerPC works is to run all kernel
+space code in PR=1 which is user space. This way we trap all privileged
+instructions and can emulate them accordingly.
+
+Unfortunately that is also the downfall. There are quite some privileged
+instructions that needlessly return us to the hypervisor even though they
+could be handled differently.
+
+This is what the PPC PV interface helps with. It takes privileged instructions
+and transforms them into unprivileged ones with some help from the hypervisor.
+This cuts down virtualization costs by about 50% on some of my benchmarks.
+
+The code for that interface can be found in arch/powerpc/kernel/kvm*
+
+Querying for existence
+======================
+
+To find out if we're running on KVM or not, we leverage the device tree. When
+Linux is running on KVM, a node /hypervisor exists. That node contains a
+compatible property with the value "linux,kvm".
+
+Once you determined you're running under a PV capable KVM, you can now use
+hypercalls as described below.
+
+KVM hypercalls
+==============
+
+Inside the device tree's /hypervisor node there's a property called
+'hypercall-instructions'. This property contains at most 4 opcodes that make
+up the hypercall. To call a hypercall, just call these instructions.
+
+The parameters are as follows:
+
+        Register        IN                      OUT
+
+        r0              -                       volatile
+        r3              1st parameter           Return code
+        r4              2nd parameter           1st output value
+        r5              3rd parameter           2nd output value
+        r6              4th parameter           3rd output value
+        r7              5th parameter           4th output value
+        r8              6th parameter           5th output value
+        r9              7th parameter           6th output value
+        r10             8th parameter           7th output value
+        r11             hypercall number        8th output value
+        r12             -                       volatile
+
+Hypercall definitions are shared in generic code, so the same hypercall numbers
+apply for x86 and powerpc alike with the exception that each KVM hypercall
+also needs to be ORed with the KVM vendor code which is (42 << 16).
+
+Return codes can be as follows:
+
+        Code            Meaning
+
+        0               Success
+        12              Hypercall not implemented
+        <0              Error
+
+The magic page
+==============
+
+To enable communication between the hypervisor and guest there is a new shared
+page that contains parts of supervisor visible register state. The guest can
+map this shared page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE.
+
+With this hypercall issued the guest always gets the magic page mapped at the
+desired location in effective and physical address space. For now, we always
+map the page to -4096. This way we can access it using absolute load and store
+functions. The following instruction reads the first field of the magic page:
+
+        ld      rX, -4096(0)
+
+The interface is designed to be extensible should there be need later to add
+additional registers to the magic page. If you add fields to the magic page,
+also define a new hypercall feature to indicate that the host can give you more
+registers. Only if the host supports the additional features, make use of them.
+
+The magic page has the following layout as described in
+arch/powerpc/include/asm/kvm_para.h:
+
+struct kvm_vcpu_arch_shared {
+        __u64 scratch1;
+        __u64 scratch2;
+        __u64 scratch3;
+        __u64 critical;         /* Guest may not get interrupts if == r1 */
+        __u64 sprg0;
+        __u64 sprg1;
+        __u64 sprg2;
+        __u64 sprg3;
+        __u64 srr0;
+        __u64 srr1;
+        __u64 dar;
+        __u64 msr;
+        __u32 dsisr;
+        __u32 int_pending;      /* Tells the guest if we have an interrupt */
+};
+
+Additions to the page must only occur at the end. Struct fields are always 32
+or 64 bit aligned, depending on them being 32 or 64 bit wide respectively.
+
+MSR bits
+========
+
+The MSR contains bits that require hypervisor intervention and bits that do
+not require direct hypervisor intervention because they only get interpreted
+when entering the guest or don't have any impact on the hypervisor's behavior.
+
+The following bits are safe to be set inside the guest:
+
+  MSR_EE
+  MSR_RI
+  MSR_CR
+  MSR_ME
+
+If any other bit changes in the MSR, please still use mtmsr(d).
+
+Patched instructions
+====================
+
+The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions
+respectively on 32 bit systems with an added offset of 4 to accomodate for big
+endianness.
+
+The following is a list of mapping the Linux kernel performs when running as
+guest. Implementing any of those mappings is optional, as the instruction traps
+also act on the shared page. So calling privileged instructions still works as
+before.
+
+From                    To
+====                    ==
+
+mfmsr   rX              ld      rX, magic_page->msr
+mfsprg  rX, 0           ld      rX, magic_page->sprg0
+mfsprg  rX, 1           ld      rX, magic_page->sprg1
+mfsprg  rX, 2           ld      rX, magic_page->sprg2
+mfsprg  rX, 3           ld      rX, magic_page->sprg3
+mfsrr0  rX              ld      rX, magic_page->srr0
+mfsrr1  rX              ld      rX, magic_page->srr1
+mfdar   rX              ld      rX, magic_page->dar
+mfdsisr rX              lwz     rX, magic_page->dsisr
+
+mtmsr   rX              std     rX, magic_page->msr
+mtsprg  0, rX           std     rX, magic_page->sprg0
+mtsprg  1, rX           std     rX, magic_page->sprg1
+mtsprg  2, rX           std     rX, magic_page->sprg2
+mtsprg  3, rX           std     rX, magic_page->sprg3
+mtsrr0  rX              std     rX, magic_page->srr0
+mtsrr1  rX              std     rX, magic_page->srr1
+mtdar   rX              std     rX, magic_page->dar
+mtdsisr rX              stw     rX, magic_page->dsisr
+
+tlbsync                 nop
+
+mtmsrd  rX, 0           b       <special mtmsr section>
+mtmsr   rX              b       <special mtmsr section>
+
+mtmsrd  rX, 1           b       <special mtmsrd section>
+
+[BookE only]
+wrteei  [0|1]           b       <special wrteei section>
+
+
+Some instructions require more logic to determine what's going on than a load
+or store instruction can deliver. To enable patching of those, we keep some
+RAM around where we can live translate instructions to. What happens is the
+following:
+
+        1) copy emulation code to memory
+        2) patch that code to fit the emulated instruction
+        3) patch that code to return to the original pc + 4
+        4) patch the original instruction to branch to the new code
+
+That way we can inject an arbitrary amount of code as replacement for a single
+instruction. This allows us to check for pending interrupts when setting EE=1
+for example.