1 files changed, 88 insertions, 89 deletions

diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index b269513cde45..143958f1ef0a 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -64,37 +64,37 @@ static unsigned int pci_irq_line;
 
 static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
 {
-        outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
-             &lp->evm_saa9730_regs->InterruptBlock1);
-        outl(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
-             &lp->evm_saa9730_regs->InterruptStatus1);
-        outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
-             EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+               &lp->evm_saa9730_regs->InterruptBlock1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
+               &lp->evm_saa9730_regs->InterruptStatus1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
+               EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
 }
 
 static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
 {
-        outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
-             &lp->evm_saa9730_regs->InterruptBlock1);
-        outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
-             &lp->evm_saa9730_regs->InterruptEnable1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+               &lp->evm_saa9730_regs->InterruptBlock1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
+               &lp->evm_saa9730_regs->InterruptEnable1);
 }
 
 static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
 {
-        outl(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
+        writel(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
 }
 
 static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
 {
-        outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
-             &lp->evm_saa9730_regs->InterruptBlock1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+               &lp->evm_saa9730_regs->InterruptBlock1);
 }
 
 static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
 {
-        outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
-             &lp->evm_saa9730_regs->InterruptBlock1);
+        writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+               &lp->evm_saa9730_regs->InterruptBlock1);
 }
 
 static void __attribute_used__ show_saa9730_regs(struct lan_saa9730_private *lp)
@@ -147,7 +147,7 @@ static void __attribute_used__ show_saa9730_regs(struct lan_saa9730_private *lp)
         printk("lp->lan_saa9730_regs->RxStatus = %x\n",
                readl(&lp->lan_saa9730_regs->RxStatus));
         for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
-                outl(i, &lp->lan_saa9730_regs->CamAddress);
+                writel(i, &lp->lan_saa9730_regs->CamAddress);
                 printk("lp->lan_saa9730_regs->CamData = %x\n",
                        readl(&lp->lan_saa9730_regs->CamData));
         }
@@ -288,28 +288,27 @@ static int lan_saa9730_allocate_buffers(struct pci_dev *pdev,
          * Set rx buffer A and rx buffer B to point to the first two buffer
          * spaces.
          */
-        outl(lp->dma_addr + rxoffset,
-             &lp->lan_saa9730_regs->RxBuffA);
-        outl(lp->dma_addr + rxoffset +
-             LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE,
-             &lp->lan_saa9730_regs->RxBuffB);
+        writel(lp->dma_addr + rxoffset, &lp->lan_saa9730_regs->RxBuffA);
+        writel(lp->dma_addr + rxoffset +
+               LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE,
+               &lp->lan_saa9730_regs->RxBuffB);
 
         /*
          * Set txm_buf_a and txm_buf_b to point to the first two buffer
          * space
          */
-        outl(lp->dma_addr + txoffset,
-             &lp->lan_saa9730_regs->TxBuffA);
-        outl(lp->dma_addr + txoffset +
-             LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE,
-             &lp->lan_saa9730_regs->TxBuffB);
+        writel(lp->dma_addr + txoffset,
+               &lp->lan_saa9730_regs->TxBuffA);
+        writel(lp->dma_addr + txoffset +
+               LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE,
+               &lp->lan_saa9730_regs->TxBuffB);
 
         /* Set packet number */
-        outl((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
-             (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
-             (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
-             (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
-             &lp->lan_saa9730_regs->PacketCount);
+        writel((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
+               (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
+               (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
+               (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
+               &lp->lan_saa9730_regs->PacketCount);
 
         return 0;
 
@@ -326,10 +325,10 @@ static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
 
         for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
                 /* First set address to where data is written */
-                outl(i, &lp->lan_saa9730_regs->CamAddress);
-                outl((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
-                     | (NetworkAddress[2] << 8) | NetworkAddress[3],
-                     &lp->lan_saa9730_regs->CamData);
+                writel(i, &lp->lan_saa9730_regs->CamAddress);
+                writel((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16) |
+                       (NetworkAddress[2] << 8) | NetworkAddress[3],
+                       &lp->lan_saa9730_regs->CamData);
                 NetworkAddress += 4;
         }
         return 0;
@@ -365,8 +364,8 @@ static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
         }
 
         /* Now set the control and address register. */
-        outl(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
-             &lp->lan_saa9730_regs->StationMgmtCtl);
+        writel(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
+               &lp->lan_saa9730_regs->StationMgmtCtl);
 
         /* check link status, spin here till station is not busy */
         i = 0;
@@ -391,23 +390,23 @@ static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
                 /* Link is down, reset the PHY first. */
 
                 /* set PHY address = 'CONTROL' */
-                outl(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
-                     &lp->lan_saa9730_regs->StationMgmtCtl);
+                writel(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
+                       &lp->lan_saa9730_regs->StationMgmtCtl);
 
                 /* Wait for 1 ms. */
                 mdelay(1);
 
                 /* set 'CONTROL' = force reset and renegotiate */
-                outl(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
-                     PHY_CONTROL_RESTART_AUTO_NEG,
-                     &lp->lan_saa9730_regs->StationMgmtData);
+                writel(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
+                       PHY_CONTROL_RESTART_AUTO_NEG,
+                       &lp->lan_saa9730_regs->StationMgmtData);
 
                 /* Wait for 50 ms. */
                 mdelay(50);
 
                 /* set 'BUSY' to start operation */
-                outl(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
-                     PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
+                writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
+                       PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
 
                 /* await completion */
                 i = 0;
@@ -427,9 +426,9 @@ static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
 
                 for (l = 0; l < 2; l++) {
                         /* set PHY address = 'STATUS' */
-                        outl(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
-                             PHY_STATUS,
-                             &lp->lan_saa9730_regs->StationMgmtCtl);
+                        writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
+                               PHY_STATUS,
+                               &lp->lan_saa9730_regs->StationMgmtCtl);
 
                         /* await completion */
                         i = 0;
@@ -462,35 +461,35 @@ static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
 static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
 {
         /* Initialize DMA control register. */
-        outl((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
-             (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
-             (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
-             | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
-             DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
-             &lp->lan_saa9730_regs->LanDmaCtl);
+        writel((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
+               (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
+               (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
+               | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
+               DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
+               &lp->lan_saa9730_regs->LanDmaCtl);
 
         /* Initial MAC control register. */
-        outl((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
-             &lp->lan_saa9730_regs->MacCtl);
+        writel((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
+               &lp->lan_saa9730_regs->MacCtl);
 
         /* Initialize CAM control register. */
-        outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
-             &lp->lan_saa9730_regs->CamCtl);
+        writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
+               &lp->lan_saa9730_regs->CamCtl);
 
         /*
          * Initialize CAM enable register, only turn on first entry, should
          * contain own addr.
          */
-        outl(0x0001, &lp->lan_saa9730_regs->CamEnable);
+        writel(0x0001, &lp->lan_saa9730_regs->CamEnable);
 
         /* Initialize Tx control register */
-        outl(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
+        writel(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
 
         /* Initialize Rcv control register */
-        outl(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
+        writel(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
 
         /* Reset DMA engine */
-        outl(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
+        writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
 
         return 0;
 }
@@ -500,14 +499,14 @@ static int lan_saa9730_stop(struct lan_saa9730_private *lp)
         int i;
 
         /* Stop DMA first */
-        outl(readl(&lp->lan_saa9730_regs->LanDmaCtl) &
-             ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
-             &lp->lan_saa9730_regs->LanDmaCtl);
+        writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) &
+               ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
+               &lp->lan_saa9730_regs->LanDmaCtl);
 
         /* Set the SW Reset bits in DMA and MAC control registers */
-        outl(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
-        outl(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
-             &lp->lan_saa9730_regs->MacCtl);
+        writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
+        writel(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
+               &lp->lan_saa9730_regs->MacCtl);
 
         /*
          * Wait for MAC reset to have finished. The reset bit is auto cleared
@@ -532,8 +531,8 @@ static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
         /* Stop lan controller. */
         lan_saa9730_stop(lp);
 
-        outl(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
-             &lp->lan_saa9730_regs->Timeout);
+        writel(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
+               &lp->lan_saa9730_regs->Timeout);
 
         return 0;
 }
@@ -552,19 +551,19 @@ static int lan_saa9730_start(struct lan_saa9730_private *lp)
         lp->PendingTxmPacketIndex = 0;
         lp->PendingTxmBufferIndex = 0;
 
-        outl(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
-             DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
+        writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
+               DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
 
         /* For Tx, turn on MAC then DMA */
-        outl(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
-             &lp->lan_saa9730_regs->TxCtl);
+        writel(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
+               &lp->lan_saa9730_regs->TxCtl);
 
         /* For Rx, turn on DMA then MAC */
-        outl(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
-             &lp->lan_saa9730_regs->RxCtl);
+        writel(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
+               &lp->lan_saa9730_regs->RxCtl);
 
         /* Set Ok2Use to let hardware own the buffers.  */
-        outl(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
+        writel(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
 
         return 0;
 }
@@ -587,7 +586,7 @@ static int lan_saa9730_tx(struct net_device *dev)
                 printk("lan_saa9730_tx interrupt\n");
 
         /* Clear interrupt. */
-        outl(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
+        writel(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
 
         while (1) {
                 pPacket = lp->TxmBuffer[lp->PendingTxmBufferIndex]
@@ -660,8 +659,8 @@ static int lan_saa9730_rx(struct net_device *dev)
                 printk("lan_saa9730_rx interrupt\n");
 
         /* Clear receive interrupts. */
-        outl(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
-             DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
+        writel(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
+               DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
 
         /* Address next packet */
         BufferIndex = lp->NextRcvBufferIndex;
@@ -725,8 +724,8 @@ static int lan_saa9730_rx(struct net_device *dev)
                 *pPacket = cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
 
                 /* Make sure A or B is available to hardware as appropriate. */
-                outl(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A,
-                     &lp->lan_saa9730_regs->Ok2Use);
+                writel(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A,
+                       &lp->lan_saa9730_regs->Ok2Use);
 
                 /* Go to next packet in sequence. */
                 lp->NextRcvPacketIndex++;
@@ -844,8 +843,8 @@ static int lan_saa9730_write(struct lan_saa9730_private *lp,
                             (len << TX_STAT_CTL_LENGTH_SHF));
 
         /* Make sure A or B is available to hardware as appropriate. */
-        outl(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A,
-             &lp->lan_saa9730_regs->Ok2Use);
+        writel(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A,
+               &lp->lan_saa9730_regs->Ok2Use);
 
         return 0;
 }
@@ -938,15 +937,15 @@ static void lan_saa9730_set_multicast(struct net_device *dev)
 
         if (dev->flags & IFF_PROMISC) {
                 /* accept all packets */
-                outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
-                     CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
-                     &lp->lan_saa9730_regs->CamCtl);
+                writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
+                       CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
+                       &lp->lan_saa9730_regs->CamCtl);
         } else {
                 if (dev->flags & IFF_ALLMULTI) {
                         /* accept all multicast packets */
-                        outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
-                             CAM_CONTROL_BROAD_ACC,
-                             &lp->lan_saa9730_regs->CamCtl);
+                        writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
+                               CAM_CONTROL_BROAD_ACC,
+                               &lp->lan_saa9730_regs->CamCtl);
                 } else {
                         /*
                          * Will handle the multicast stuff later. -carstenl