aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/m68k/include/asm/m5249sim.h269
-rw-r--r--arch/m68k/include/asm/m525xsim.h116
-rw-r--r--arch/m68k/include/asm/mcfsim.h5
-rw-r--r--arch/m68k/platform/coldfire/intc-5249.c8
-rw-r--r--arch/m68k/platform/coldfire/m5249.c8
5 files changed, 124 insertions, 282 deletions
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
deleted file mode 100644
index fdf45e6807c9..000000000000
--- a/arch/m68k/include/asm/m5249sim.h
+++ /dev/null
@@ -1,269 +0,0 @@
1/****************************************************************************/
2
3/*
4 * m5249sim.h -- ColdFire 5249 System Integration Module support.
5 *
6 * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
7 */
8
9/****************************************************************************/
10#ifndef m5249sim_h
11#define m5249sim_h
12/****************************************************************************/
13
14#define CPU_NAME "COLDFIRE(m5249)"
15#define CPU_INSTR_PER_JIFFY 3
16#define MCF_BUSCLK (MCF_CLK / 2)
17
18#include <asm/m52xxacr.h>
19
20/*
21 * The 5249 has a second MBAR region, define its address.
22 */
23#define MCF_MBAR2 0x80000000
24
25/*
26 * Define the 5249 SIM register set addresses.
27 */
28#define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */
29#define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */
30#define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */
31#define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog srv */
32#define MCFSIM_PAR (MCF_MBAR + 0x04) /* Pin Assignment */
33#define MCFSIM_IRQPAR (MCF_MBAR + 0x06) /* Intr Assignment */
34#define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */
35#define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */
36#define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */
37#define MCFSIM_AVR (MCF_MBAR + 0x4b) /* Autovector Ctrl */
38#define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */
39#define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */
40#define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */
41#define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */
42#define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */
43#define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */
44#define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */
45#define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */
46#define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */
47#define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */
48#define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */
49#define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */
50
51#define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */
52#define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */
53#define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */
54#define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */
55#define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */
56#define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */
57#define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */
58#define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */
59#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */
60#define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */
61#define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */
62#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */
63
64#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */
65#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */
66#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */
67#define MCFSIM_DACR1 (MCF_MBAR + 0x110) /* DRAM 1 Addr/Ctrl */
68#define MCFSIM_DMR1 (MCF_MBAR + 0x114) /* DRAM 1 Mask */
69
70/*
71 * Timer module.
72 */
73#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */
74#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */
75
76/*
77 * UART module.
78 */
79#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
80#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
81
82/*
83 * QSPI module.
84 */
85#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */
86#define MCFQSPI_SIZE 0x40 /* Register set size */
87
88#define MCFQSPI_CS0 29
89#define MCFQSPI_CS1 24
90#define MCFQSPI_CS2 21
91#define MCFQSPI_CS3 22
92
93/*
94 * DMA unit base addresses.
95 */
96#define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */
97#define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */
98#define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */
99#define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */
100
101/*
102 * Some symbol defines for the above...
103 */
104#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
105#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
106#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
107#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
108#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
109#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
110#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
111#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
112#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
113#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */
114
115/*
116 * Define system peripheral IRQ usage.
117 */
118#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */
119#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
120#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
121
122#define MCF_IRQ_UART0 73 /* UART0 */
123#define MCF_IRQ_UART1 74 /* UART1 */
124
125/*
126 * General purpose IO registers (in MBAR2).
127 */
128#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */
129#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */
130#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */
131#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */
132#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */
133#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */
134#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */
135#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */
136
137#define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */
138#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */
139#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */
140
141#define MCFSIM2_INTLEVEL1 (MCF_MBAR2 + 0x140) /* Intr level reg 1 */
142#define MCFSIM2_INTLEVEL2 (MCF_MBAR2 + 0x144) /* Intr level reg 2 */
143#define MCFSIM2_INTLEVEL3 (MCF_MBAR2 + 0x148) /* Intr level reg 3 */
144#define MCFSIM2_INTLEVEL4 (MCF_MBAR2 + 0x14c) /* Intr level reg 4 */
145#define MCFSIM2_INTLEVEL5 (MCF_MBAR2 + 0x150) /* Intr level reg 5 */
146#define MCFSIM2_INTLEVEL6 (MCF_MBAR2 + 0x154) /* Intr level reg 6 */
147#define MCFSIM2_INTLEVEL7 (MCF_MBAR2 + 0x158) /* Intr level reg 7 */
148#define MCFSIM2_INTLEVEL8 (MCF_MBAR2 + 0x15c) /* Intr level reg 8 */
149
150#define MCFSIM2_DMAROUTE (MCF_MBAR2 + 0x188) /* DMA routing */
151
152#define MCFSIM2_IDECONFIG1 (MCF_MBAR2 + 0x18c) /* IDEconfig1 */
153#define MCFSIM2_IDECONFIG2 (MCF_MBAR2 + 0x190) /* IDEconfig2 */
154
155/*
156 * Define the base interrupt for the second interrupt controller.
157 * We set it to 128, out of the way of the base interrupts, and plenty
158 * of room for its 64 interrupts.
159 */
160#define MCFINTC2_VECBASE 128
161
162#define MCFINTC2_GPIOIRQ0 (MCFINTC2_VECBASE + 32)
163#define MCFINTC2_GPIOIRQ1 (MCFINTC2_VECBASE + 33)
164#define MCFINTC2_GPIOIRQ2 (MCFINTC2_VECBASE + 34)
165#define MCFINTC2_GPIOIRQ3 (MCFINTC2_VECBASE + 35)
166#define MCFINTC2_GPIOIRQ4 (MCFINTC2_VECBASE + 36)
167#define MCFINTC2_GPIOIRQ5 (MCFINTC2_VECBASE + 37)
168#define MCFINTC2_GPIOIRQ6 (MCFINTC2_VECBASE + 38)
169#define MCFINTC2_GPIOIRQ7 (MCFINTC2_VECBASE + 39)
170
171/*
172 * Generic GPIO support
173 */
174#define MCFGPIO_PIN_MAX 64
175#define MCFGPIO_IRQ_MAX -1
176#define MCFGPIO_IRQ_VECBASE -1
177
178/****************************************************************************/
179
180#ifdef __ASSEMBLER__
181
182/*
183 * The M5249C3 board needs a little help getting all its SIM devices
184 * initialized at kernel start time. dBUG doesn't set much up, so
185 * we need to do it manually.
186 */
187.macro m5249c3_setup
188 /*
189 * Set MBAR1 and MBAR2, just incase they are not set.
190 */
191 movel #0x10000001,%a0
192 movec %a0,%MBAR /* map MBAR region */
193 subql #1,%a0 /* get MBAR address in a0 */
194
195 movel #0x80000001,%a1
196 movec %a1,#3086 /* map MBAR2 region */
197 subql #1,%a1 /* get MBAR2 address in a1 */
198
199 /*
200 * Move secondary interrupts to their base (128).
201 */
202 moveb #MCFINTC2_VECBASE,%d0
203 moveb %d0,0x16b(%a1) /* interrupt base register */
204
205 /*
206 * Work around broken CSMR0/DRAM vector problem.
207 */
208 movel #0x001F0021,%d0 /* disable C/I bit */
209 movel %d0,0x84(%a0) /* set CSMR0 */
210
211 /*
212 * Disable the PLL firstly. (Who knows what state it is
213 * in here!).
214 */
215 movel 0x180(%a1),%d0 /* get current PLL value */
216 andl #0xfffffffe,%d0 /* PLL bypass first */
217 movel %d0,0x180(%a1) /* set PLL register */
218 nop
219
220#if CONFIG_CLOCK_FREQ == 140000000
221 /*
222 * Set initial clock frequency. This assumes M5249C3 board
223 * is fitted with 11.2896MHz crystal. It will program the
224 * PLL for 140MHz. Lets go fast :-)
225 */
226 movel #0x125a40f0,%d0 /* set for 140MHz */
227 movel %d0,0x180(%a1) /* set PLL register */
228 orl #0x1,%d0
229 movel %d0,0x180(%a1) /* set PLL register */
230#endif
231
232 /*
233 * Setup CS1 for ethernet controller.
234 * (Setup as per M5249C3 doco).
235 */
236 movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
237 movel %d0,0x8c(%a0)
238 movel #0x001f0021,%d0 /* CS1 size of 1Mb */
239 movel %d0,0x90(%a0)
240 movew #0x0080,%d0 /* CS1 = 16bit port, AA */
241 movew %d0,0x96(%a0)
242
243 /*
244 * Setup CS2 for IDE interface.
245 */
246 movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
247 movel %d0,0x98(%a0)
248 movel #0x001f0001,%d0 /* CS2 size of 1MB */
249 movel %d0,0x9c(%a0)
250 movew #0x0080,%d0 /* CS2 = 16bit, TA */
251 movew %d0,0xa2(%a0)
252
253 movel #0x00107000,%d0 /* IDEconfig1 */
254 movel %d0,0x18c(%a1)
255 movel #0x000c0400,%d0 /* IDEconfig2 */
256 movel %d0,0x190(%a1)
257
258 movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
259 orl %d0,0xc(%a1) /* function GPIO19 */
260 orl %d0,0x8(%a1) /* enable GPIO19 as output */
261 orl %d0,0x4(%a1) /* de-assert IDE reset */
262.endm
263
264#define PLATFORM_SETUP m5249c3_setup
265
266#endif /* __ASSEMBLER__ */
267
268/****************************************************************************/
269#endif /* m5249sim_h */
diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
index acab61cb91ed..e33f5bb6aca8 100644
--- a/arch/m68k/include/asm/m525xsim.h
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -12,6 +12,11 @@
12#define m525xsim_h 12#define m525xsim_h
13/****************************************************************************/ 13/****************************************************************************/
14 14
15/*
16 * This header supports ColdFire 5249, 5251 and 5253. There are a few
17 * little differences between them, but most of the peripheral support
18 * can be used by all of them.
19 */
15#define CPU_NAME "COLDFIRE(m525x)" 20#define CPU_NAME "COLDFIRE(m525x)"
16#define CPU_INSTR_PER_JIFFY 3 21#define CPU_INSTR_PER_JIFFY 3
17#define MCF_BUSCLK (MCF_CLK / 2) 22#define MCF_BUSCLK (MCF_CLK / 2)
@@ -65,6 +70,8 @@
65#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ 70#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */
66#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ 71#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */
67#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */ 72#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */
73#define MCFSIM_DACR1 (MCF_MBAR + 0x110) /* DRAM 1 Addr/Ctrl */
74#define MCFSIM_DMR1 (MCF_MBAR + 0x114) /* DRAM 1 Mask */
68 75
69/* 76/*
70 * Secondary Interrupt Controller (in MBAR2) 77 * Secondary Interrupt Controller (in MBAR2)
@@ -101,11 +108,17 @@
101#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */ 108#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */
102#define MCFQSPI_SIZE 0x40 /* Register set size */ 109#define MCFQSPI_SIZE 0x40 /* Register set size */
103 110
104 111#ifdef CONFIG_M5249
112#define MCFQSPI_CS0 29
113#define MCFQSPI_CS1 24
114#define MCFQSPI_CS2 21
115#define MCFQSPI_CS3 22
116#else
105#define MCFQSPI_CS0 15 117#define MCFQSPI_CS0 15
106#define MCFQSPI_CS1 16 118#define MCFQSPI_CS1 16
107#define MCFQSPI_CS2 24 119#define MCFQSPI_CS2 24
108#define MCFQSPI_CS3 28 120#define MCFQSPI_CS3 28
121#endif
109 122
110/* 123/*
111 * I2C module. 124 * I2C module.
@@ -115,6 +128,7 @@
115 128
116#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */ 129#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */
117#define MCFI2C_SIZE1 0x20 /* Register set size */ 130#define MCFI2C_SIZE1 0x20 /* Register set size */
131
118/* 132/*
119 * DMA unit base addresses. 133 * DMA unit base addresses.
120 */ 134 */
@@ -163,6 +177,7 @@
163#define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36) 177#define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36)
164#define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37) 178#define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37)
165#define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38) 179#define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38)
180#define MCF_IRQ_GPIO7 (MCFINTC2_VECBASE + 39)
166 181
167#define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40) 182#define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40)
168#define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62) 183#define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62)
@@ -183,12 +198,111 @@
183#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */ 198#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */
184#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */ 199#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */
185 200
201#define MCFSIM2_DMAROUTE (MCF_MBAR2 + 0x188) /* DMA routing */
202#define MCFSIM2_IDECONFIG1 (MCF_MBAR2 + 0x18c) /* IDEconfig1 */
203#define MCFSIM2_IDECONFIG2 (MCF_MBAR2 + 0x190) /* IDEconfig2 */
204
186/* 205/*
187 * Generic GPIO support 206 * Generic GPIO support
188 */ 207 */
189#define MCFGPIO_PIN_MAX 64 208#define MCFGPIO_PIN_MAX 64
209#ifdef CONFIG_M5249
210#define MCFGPIO_IRQ_MAX -1
211#define MCFGPIO_IRQ_VECBASE -1
212#else
190#define MCFGPIO_IRQ_MAX 7 213#define MCFGPIO_IRQ_MAX 7
191#define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0 214#define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0
215#endif
216
217/****************************************************************************/
218
219#ifdef __ASSEMBLER__
220#ifdef CONFIG_M5249C3
221/*
222 * The M5249C3 board needs a little help getting all its SIM devices
223 * initialized at kernel start time. dBUG doesn't set much up, so
224 * we need to do it manually.
225 */
226.macro m5249c3_setup
227 /*
228 * Set MBAR1 and MBAR2, just incase they are not set.
229 */
230 movel #0x10000001,%a0
231 movec %a0,%MBAR /* map MBAR region */
232 subql #1,%a0 /* get MBAR address in a0 */
233
234 movel #0x80000001,%a1
235 movec %a1,#3086 /* map MBAR2 region */
236 subql #1,%a1 /* get MBAR2 address in a1 */
237
238 /*
239 * Move secondary interrupts to their base (128).
240 */
241 moveb #MCFINTC2_VECBASE,%d0
242 moveb %d0,0x16b(%a1) /* interrupt base register */
243
244 /*
245 * Work around broken CSMR0/DRAM vector problem.
246 */
247 movel #0x001F0021,%d0 /* disable C/I bit */
248 movel %d0,0x84(%a0) /* set CSMR0 */
249
250 /*
251 * Disable the PLL firstly. (Who knows what state it is
252 * in here!).
253 */
254 movel 0x180(%a1),%d0 /* get current PLL value */
255 andl #0xfffffffe,%d0 /* PLL bypass first */
256 movel %d0,0x180(%a1) /* set PLL register */
257 nop
258
259#if CONFIG_CLOCK_FREQ == 140000000
260 /*
261 * Set initial clock frequency. This assumes M5249C3 board
262 * is fitted with 11.2896MHz crystal. It will program the
263 * PLL for 140MHz. Lets go fast :-)
264 */
265 movel #0x125a40f0,%d0 /* set for 140MHz */
266 movel %d0,0x180(%a1) /* set PLL register */
267 orl #0x1,%d0
268 movel %d0,0x180(%a1) /* set PLL register */
269#endif
270
271 /*
272 * Setup CS1 for ethernet controller.
273 * (Setup as per M5249C3 doco).
274 */
275 movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */
276 movel %d0,0x8c(%a0)
277 movel #0x001f0021,%d0 /* CS1 size of 1Mb */
278 movel %d0,0x90(%a0)
279 movew #0x0080,%d0 /* CS1 = 16bit port, AA */
280 movew %d0,0x96(%a0)
281
282 /*
283 * Setup CS2 for IDE interface.
284 */
285 movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */
286 movel %d0,0x98(%a0)
287 movel #0x001f0001,%d0 /* CS2 size of 1MB */
288 movel %d0,0x9c(%a0)
289 movew #0x0080,%d0 /* CS2 = 16bit, TA */
290 movew %d0,0xa2(%a0)
291
292 movel #0x00107000,%d0 /* IDEconfig1 */
293 movel %d0,0x18c(%a1)
294 movel #0x000c0400,%d0 /* IDEconfig2 */
295 movel %d0,0x190(%a1)
296
297 movel #0x00080000,%d0 /* GPIO19, IDE reset bit */
298 orl %d0,0xc(%a1) /* function GPIO19 */
299 orl %d0,0x8(%a1) /* enable GPIO19 as output */
300 orl %d0,0x4(%a1) /* de-assert IDE reset */
301.endm
302
303#define PLATFORM_SETUP m5249c3_setup
192 304
305#endif /* CONFIG_M5249C3 */
306#endif /* __ASSEMBLER__ */
193/****************************************************************************/ 307/****************************************************************************/
194#endif /* m525xsim_h */ 308#endif /* m525xsim_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 7a83e619e73b..a04fd9b2714c 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -24,10 +24,7 @@
24#elif defined(CONFIG_M523x) 24#elif defined(CONFIG_M523x)
25#include <asm/m523xsim.h> 25#include <asm/m523xsim.h>
26#include <asm/mcfintc.h> 26#include <asm/mcfintc.h>
27#elif defined(CONFIG_M5249) 27#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
28#include <asm/m5249sim.h>
29#include <asm/mcfintc.h>
30#elif defined(CONFIG_M525x)
31#include <asm/m525xsim.h> 28#include <asm/m525xsim.h>
32#include <asm/mcfintc.h> 29#include <asm/mcfintc.h>
33#elif defined(CONFIG_M527x) 30#elif defined(CONFIG_M527x)
diff --git a/arch/m68k/platform/coldfire/intc-5249.c b/arch/m68k/platform/coldfire/intc-5249.c
index 0864b836699a..b0d1641053e4 100644
--- a/arch/m68k/platform/coldfire/intc-5249.c
+++ b/arch/m68k/platform/coldfire/intc-5249.c
@@ -21,7 +21,7 @@ static void intc2_irq_gpio_mask(struct irq_data *d)
21{ 21{
22 u32 imr; 22 u32 imr;
23 imr = readl(MCFSIM2_GPIOINTENABLE); 23 imr = readl(MCFSIM2_GPIOINTENABLE);
24 imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0)); 24 imr &= ~(0x1 << (d->irq - MCF_IRQ_GPIO0));
25 writel(imr, MCFSIM2_GPIOINTENABLE); 25 writel(imr, MCFSIM2_GPIOINTENABLE);
26} 26}
27 27
@@ -29,13 +29,13 @@ static void intc2_irq_gpio_unmask(struct irq_data *d)
29{ 29{
30 u32 imr; 30 u32 imr;
31 imr = readl(MCFSIM2_GPIOINTENABLE); 31 imr = readl(MCFSIM2_GPIOINTENABLE);
32 imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0)); 32 imr |= (0x1 << (d->irq - MCF_IRQ_GPIO0));
33 writel(imr, MCFSIM2_GPIOINTENABLE); 33 writel(imr, MCFSIM2_GPIOINTENABLE);
34} 34}
35 35
36static void intc2_irq_gpio_ack(struct irq_data *d) 36static void intc2_irq_gpio_ack(struct irq_data *d)
37{ 37{
38 writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCFSIM2_GPIOINTCLEAR); 38 writel(0x1 << (d->irq - MCF_IRQ_GPIO0), MCFSIM2_GPIOINTCLEAR);
39} 39}
40 40
41static struct irq_chip intc2_irq_gpio_chip = { 41static struct irq_chip intc2_irq_gpio_chip = {
@@ -50,7 +50,7 @@ static int __init mcf_intc2_init(void)
50 int irq; 50 int irq;
51 51
52 /* GPIO interrupt sources */ 52 /* GPIO interrupt sources */
53 for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) { 53 for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO7); irq++) {
54 irq_set_chip(irq, &intc2_irq_gpio_chip); 54 irq_set_chip(irq, &intc2_irq_gpio_chip);
55 irq_set_handler(irq, handle_edge_irq); 55 irq_set_handler(irq, handle_edge_irq);
56 } 56 }
diff --git a/arch/m68k/platform/coldfire/m5249.c b/arch/m68k/platform/coldfire/m5249.c
index 23b19cb7ab50..8370a57c3788 100644
--- a/arch/m68k/platform/coldfire/m5249.c
+++ b/arch/m68k/platform/coldfire/m5249.c
@@ -28,8 +28,8 @@ static struct resource m5249_smc91x_resources[] = {
28 .flags = IORESOURCE_MEM, 28 .flags = IORESOURCE_MEM,
29 }, 29 },
30 { 30 {
31 .start = MCFINTC2_GPIOIRQ6, 31 .start = MCF_IRQ_GPIO6,
32 .end = MCFINTC2_GPIOIRQ6, 32 .end = MCF_IRQ_GPIO6,
33 .flags = IORESOURCE_IRQ, 33 .flags = IORESOURCE_IRQ,
34 }, 34 },
35}; 35};
@@ -75,8 +75,8 @@ static void __init m5249_smc91x_init(void)
75 gpio = readl(MCFSIM2_GPIOINTENABLE); 75 gpio = readl(MCFSIM2_GPIOINTENABLE);
76 writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE); 76 writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
77 77
78 gpio = readl(MCFSIM2_INTLEVEL5); 78 gpio = readl(MCFINTC2_INTPRI5);
79 writel(gpio | 0x04000000, MCFSIM2_INTLEVEL5); 79 writel(gpio | 0x04000000, MCFINTC2_INTPRI5);
80} 80}
81 81
82#endif /* CONFIG_M5249C3 */ 82#endif /* CONFIG_M5249C3 */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-30 16:37:21 -0500