9 files changed, 103 insertions, 49 deletions

diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 80abafb9bf33..9650c143afc1 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -906,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request,
         return ret;
 }
 
-#ifdef __ARMEB__
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
-#else
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
-#endif
-
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
         unsigned long ip;
 
-        /*
-         * Save IP.  IP is used to denote syscall entry/exit:
-         *  IP = 0 -> entry, = 1 -> exit
-         */
-        ip = regs->ARM_ip;
-        regs->ARM_ip = why;
-
-        if (!ip)
+        if (why)
                 audit_syscall_exit(regs);
         else
-                audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+                audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
                                     regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
         if (!test_thread_flag(TIF_SYSCALL_TRACE))
@@ -936,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 
         current_thread_info()->syscall = scno;
 
+        /*
+         * IP is used to denote syscall entry/exit:
+         * IP = 0 -> entry, =1 -> exit
+         */
+        ip = regs->ARM_ip;
+        regs->ARM_ip = why;
+
         /* the 0x80 provides a way for the tracing parent to distinguish
            between a syscall stop and SIGTRAP delivery */
         ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index f6a4d32b0421..8f4644659777 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
         struct mm_struct *mm = &init_mm;
         unsigned int cpu = smp_processor_id();
 
-        printk("CPU%u: Booted secondary processor\n", cpu);
-
         /*
          * All kernel threads share the same mm context; grab a
          * reference and switch to it.
@@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
         enter_lazy_tlb(mm, current);
         local_flush_tlb_all();
 
+        printk("CPU%u: Booted secondary processor\n", cpu);
+
         cpu_init();
         preempt_disable();
         trace_hardirqs_off();
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index d2b177905cdb..76cbb055dd05 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -115,7 +115,7 @@ int kernel_execve(const char *filename,
                   "Ir" (THREAD_START_SP - sizeof(regs)),
                   "r" (&regs),
                   "Ir" (sizeof(regs))
-                : "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+                : "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
 
  out:
         return ret;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 71f4727da373..5a98aa272184 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -185,10 +185,22 @@ void __init setup_per_cpu_areas(void)
 #endif
         rc = -EINVAL;
         if (pcpu_chosen_fc != PCPU_FC_PAGE) {
-                const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE;
                 const size_t dyn_size = PERCPU_MODULE_RESERVE +
                         PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
+                size_t atom_size;
 
+                /*
+                 * On 64bit, use PMD_SIZE for atom_size so that embedded
+                 * percpu areas are aligned to PMD.  This, in the future,
+                 * can also allow using PMD mappings in vmalloc area.  Use
+                 * PAGE_SIZE on 32bit as vmalloc space is highly contended
+                 * and large vmalloc area allocs can easily fail.
+                 */
+#ifdef CONFIG_X86_64
+                atom_size = PMD_SIZE;
+#else
+                atom_size = PAGE_SIZE;
+#endif
                 rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
                                             dyn_size, atom_size,
                                             pcpu_cpu_distance,
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index a8f8844b8d32..95dccce8e979 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -63,6 +63,7 @@
 #include <asm/stackprotector.h>
 #include <asm/hypervisor.h>
 #include <asm/mwait.h>
+#include <asm/pci_x86.h>
 
 #ifdef CONFIG_ACPI
 #include <linux/acpi.h>
@@ -809,9 +810,40 @@ static void xen_io_delay(void)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
+static unsigned long xen_set_apic_id(unsigned int x)
+{
+        WARN_ON(1);
+        return x;
+}
+static unsigned int xen_get_apic_id(unsigned long x)
+{
+        return ((x)>>24) & 0xFFu;
+}
 static u32 xen_apic_read(u32 reg)
 {
-        return 0;
+        struct xen_platform_op op = {
+                .cmd = XENPF_get_cpuinfo,
+                .interface_version = XENPF_INTERFACE_VERSION,
+                .u.pcpu_info.xen_cpuid = 0,
+        };
+        int ret = 0;
+
+        /* Shouldn't need this as APIC is turned off for PV, and we only
+         * get called on the bootup processor. But just in case. */
+        if (!xen_initial_domain() || smp_processor_id())
+                return 0;
+
+        if (reg == APIC_LVR)
+                return 0x10;
+
+        if (reg != APIC_ID)
+                return 0;
+
+        ret = HYPERVISOR_dom0_op(&op);
+        if (ret)
+                return 0;
+
+        return op.u.pcpu_info.apic_id << 24;
 }
 
 static void xen_apic_write(u32 reg, u32 val)
@@ -849,6 +881,8 @@ static void set_xen_basic_apic_ops(void)
         apic->icr_write = xen_apic_icr_write;
         apic->wait_icr_idle = xen_apic_wait_icr_idle;
         apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle;
+        apic->set_apic_id = xen_set_apic_id;
+        apic->get_apic_id = xen_get_apic_id;
 }
 
 #endif
@@ -1365,8 +1399,10 @@ asmlinkage void __init xen_start_kernel(void)
                 /* Make sure ACS will be enabled */
                 pci_request_acs();
         }
-                
-
+#ifdef CONFIG_PCI
+        /* PCI BIOS service won't work from a PV guest. */
+        pci_probe &= ~PCI_PROBE_BIOS;
+#endif
         xen_raw_console_write("about to get started...\n");
 
         xen_setup_runstate_info(0);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index b8e279479a6b..69f5857660ac 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -353,8 +353,13 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
         if (val & _PAGE_PRESENT) {
                 unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+                unsigned long pfn = mfn_to_pfn(mfn);
+
                 pteval_t flags = val & PTE_FLAGS_MASK;
-                val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
+                if (unlikely(pfn == ~0))
+                        val = flags & ~_PAGE_PRESENT;
+                else
+                        val = ((pteval_t)pfn << PAGE_SHIFT) | flags;
         }
 
         return val;
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index cb4529c40d74..b7f5173ff9e9 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -365,7 +365,7 @@ static int __devinit xenfb_probe(struct xenbus_device *dev,
         struct fb_info *fb_info;
         int fb_size;
         int val;
-        int ret;
+        int ret = 0;
 
         info = kzalloc(sizeof(*info), GFP_KERNEL);
         if (info == NULL) {
@@ -458,26 +458,31 @@ static int __devinit xenfb_probe(struct xenbus_device *dev,
         xenfb_init_shared_page(info, fb_info);
 
         ret = xenfb_connect_backend(dev, info);
-        if (ret < 0)
-                goto error;
+        if (ret < 0) {
+                xenbus_dev_fatal(dev, ret, "xenfb_connect_backend");
+                goto error_fb;
+        }
 
         ret = register_framebuffer(fb_info);
         if (ret) {
-                fb_deferred_io_cleanup(fb_info);
-                fb_dealloc_cmap(&fb_info->cmap);
-                framebuffer_release(fb_info);
                 xenbus_dev_fatal(dev, ret, "register_framebuffer");
-                goto error;
+                goto error_fb;
         }
         info->fb_info = fb_info;
 
         xenfb_make_preferred_console();
         return 0;
 
- error_nomem:
-        ret = -ENOMEM;
-        xenbus_dev_fatal(dev, ret, "allocating device memory");
- error:
+error_fb:
+        fb_deferred_io_cleanup(fb_info);
+        fb_dealloc_cmap(&fb_info->cmap);
+        framebuffer_release(fb_info);
+error_nomem:
+        if (!ret) {
+                ret = -ENOMEM;
+                xenbus_dev_fatal(dev, ret, "allocating device memory");
+        }
+error:
         xenfb_remove(dev);
         return ret;
 }
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 94243136f6bf..ea20c51d24c7 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -183,15 +183,17 @@ config XEN_ACPI_PROCESSOR
         depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ
         default m
         help
-          This ACPI processor uploads Power Management information to the Xen hypervisor.
-
-          To do that the driver parses the Power Management data and uploads said
-          information to the Xen hypervisor. Then the Xen hypervisor can select the
-          proper Cx and Pxx states. It also registers itslef as the SMM so that
-          other drivers (such as ACPI cpufreq scaling driver) will not load.
-
-          To compile this driver as a module, choose M here: the
-          module will be called xen_acpi_processor  If you do not know what to choose,
-          select M here. If the CPUFREQ drivers are built in, select Y here.
+          This ACPI processor uploads Power Management information to the Xen
+          hypervisor.
+
+          To do that the driver parses the Power Management data and uploads
+          said information to the Xen hypervisor. Then the Xen hypervisor can
+          select the proper Cx and Pxx states. It also registers itslef as the
+          SMM so that other drivers (such as ACPI cpufreq scaling driver) will
+          not load.
+
+          To compile this driver as a module, choose M here: the module will be
+          called xen_acpi_processor  If you do not know what to choose, select
+          M here. If the CPUFREQ drivers are built in, select Y here.
 
 endmenu
diff --git a/mm/percpu.c b/mm/percpu.c
index f47af9123af7..f921fdfb5430 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1132,20 +1132,20 @@ static void pcpu_dump_alloc_info(const char *lvl,
                 for (alloc_end += gi->nr_units / upa;
                      alloc < alloc_end; alloc++) {
                         if (!(alloc % apl)) {
-                                printk("\n");
+                                printk(KERN_CONT "\n");
                                 printk("%spcpu-alloc: ", lvl);
                         }
-                        printk("[%0*d] ", group_width, group);
+                        printk(KERN_CONT "[%0*d] ", group_width, group);
 
                         for (unit_end += upa; unit < unit_end; unit++)
                                 if (gi->cpu_map[unit] != NR_CPUS)
-                                        printk("%0*d ", cpu_width,
+                                        printk(KERN_CONT "%0*d ", cpu_width,
                                                gi->cpu_map[unit]);
                                 else
-                                        printk("%s ", empty_str);
+                                        printk(KERN_CONT "%s ", empty_str);
                 }
         }
-        printk("\n");
+        printk(KERN_CONT "\n");
 }
 
 /**