3 files changed, 14 insertions, 0 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index b2c910c52df9..3027ad53fa65 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -973,6 +973,12 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
                 ew32(CTRL_EXT, reg);
         }
 
+        if (hw->mac.type == e1000_82571) {
+                reg = er32(PBA_ECC);
+                reg |= E1000_PBA_ECC_CORR_EN;
+                ew32(PBA_ECC, reg);
+        }
+
         /* PCI-Ex Control Register */
         if (hw->mac.type == e1000_82574) {
                 reg = er32(GCR);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 48f79ecb82a0..34a68fcab5a9 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -372,6 +372,13 @@
 #define E1000_ICR_TXQ1          0x00800000 /* Tx Queue 1 Interrupt */
 #define E1000_ICR_OTHER         0x01000000 /* Other Interrupts */
 
+/* PBA ECC Register */
+#define E1000_PBA_ECC_COUNTER_MASK  0xFFF00000 /* ECC counter mask */
+#define E1000_PBA_ECC_COUNTER_SHIFT 20         /* ECC counter shift value */
+#define E1000_PBA_ECC_CORR_EN       0x00000001 /* ECC correction enable */
+#define E1000_PBA_ECC_STAT_CLR      0x00000002 /* Clear ECC error counter */
+#define E1000_PBA_ECC_INT_EN        0x00000004 /* Enable ICR bit 5 for ECC */
+
 /*
  * This defines the bits that are set in the Interrupt Mask
  * Set/Read Register.  Each bit is documented below:
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f66ed37a7f76..c4ffd4b70517 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -87,6 +87,7 @@ enum e1e_registers {
         E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
         E1000_EEWR     = 0x0102C, /* EEPROM Write Register - RW */
         E1000_FLOP     = 0x0103C, /* FLASH Opcode Register */
+        E1000_PBA_ECC  = 0x01100, /* PBA ECC Register */
         E1000_ERT      = 0x02008, /* Early Rx Threshold - RW */
         E1000_FCRTL    = 0x02160, /* Flow Control Receive Threshold Low - RW */
         E1000_FCRTH    = 0x02168, /* Flow Control Receive Threshold High - RW */