4 files changed, 95 insertions, 6 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ea1b70b35793..99514ced82c5 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -59,6 +59,7 @@ Table of Contents
       p) Freescale Synchronous Serial Interface
           q) USB EHCI controllers
       r) MDIO on GPIOs
+      s) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -1883,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model.
                          &qe_pio_c 6>;
         };
 
+    s) SPI (Serial Peripheral Interface) busses
+
+    SPI busses can be described with a node for the SPI master device
+    and a set of child nodes for each SPI slave on the bus.  For this
+    discussion, it is assumed that the system's SPI controller is in
+    SPI master mode.  This binding does not describe SPI controllers
+    in slave mode.
+
+    The SPI master node requires the following properties:
+    - #address-cells  - number of cells required to define a chip select
+                        address on the SPI bus.
+    - #size-cells     - should be zero.
+    - compatible      - name of SPI bus controller following generic names
+                        recommended practice.
+    No other properties are required in the SPI bus node.  It is assumed
+    that a driver for an SPI bus device will understand that it is an SPI bus.
+    However, the binding does not attempt to define the specific method for
+    assigning chip select numbers.  Since SPI chip select configuration is
+    flexible and non-standardized, it is left out of this binding with the
+    assumption that board specific platform code will be used to manage
+    chip selects.  Individual drivers can define additional properties to
+    support describing the chip select layout.
+
+    SPI slave nodes must be children of the SPI master node and can
+    contain the following properties.
+    - reg             - (required) chip select address of device.
+    - compatible      - (required) name of SPI device following generic names
+                        recommended practice
+    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+    - spi-cpol        - (optional) Empty property indicating device requires
+                        inverse clock polarity (CPOL) mode
+    - spi-cpha        - (optional) Empty property indicating device requires
+                        shifted clock phase (CPHA) mode
+
+    SPI example for an MPC5200 SPI bus:
+                spi@f00 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+                        reg = <0xf00 0x20>;
+                        interrupts = <2 13 0 2 14 0>;
+                        interrupt-parent = <&mpc5200_pic>;
+
+                        ethernet-switch@0 {
+                                compatible = "micrel,ks8995m";
+                                spi-max-frequency = <1000000>;
+                                reg = <0>;
+                        };
+
+                        codec@1 {
+                                compatible = "ti,tlv320aic26";
+                                spi-max-frequency = <100000>;
+                                reg = <1>;
+                        };
+                };
+
 VII - Marvell Discovery mv64[345]6x System Controller chips
 ===========================================================
 
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index d664b1bce381..9a51675beb80 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,7 +1,6 @@
 config PPC_MPC52xx
         bool "52xx-based boards"
         depends on PPC_MULTIPLATFORM && PPC32
-        select FSL_SOC
         select PPC_CLOCK
         select PPC_PCI_CHOICE
 
@@ -48,6 +47,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
         bool "MPC5200 GPIO support"
         depends on PPC_MPC52xx
+        select GENERIC_GPIO
         select HAVE_GPIO_LIB
         help
           Enable gpiolib support for mpc5200 based boards
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 5c015d310d4a..344e1b03dd8b 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -91,8 +91,6 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
                 }
 
                 info.irq = irq_of_parse_and_map(node, 0);
-                if (info.irq == NO_IRQ)
-                        info.irq = -1;
 
                 if (of_find_i2c_driver(node, &info) < 0) {
                         irq_dispose_mapping(info.irq);
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
index 710c5d36efaa..8917ed630565 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -60,10 +60,12 @@
 #define MPC52xx_PSC_RXTX_FIFO_ALARM     0x0002
 #define MPC52xx_PSC_RXTX_FIFO_EMPTY     0x0001
 
-/* PSC interrupt mask bits */
+/* PSC interrupt status/mask bits */
 #define MPC52xx_PSC_IMR_TXRDY           0x0100
 #define MPC52xx_PSC_IMR_RXRDY           0x0200
 #define MPC52xx_PSC_IMR_DB              0x0400
+#define MPC52xx_PSC_IMR_TXEMP           0x0800
+#define MPC52xx_PSC_IMR_ORERR           0x1000
 #define MPC52xx_PSC_IMR_IPC             0x8000
 
 /* PSC input port change bit */
@@ -92,6 +94,34 @@
 
 #define MPC52xx_PSC_RFNUM_MASK  0x01ff
 
+#define MPC52xx_PSC_SICR_DTS1                   (1 << 29)
+#define MPC52xx_PSC_SICR_SHDR                   (1 << 28)
+#define MPC52xx_PSC_SICR_SIM_MASK               (0xf << 24)
+#define MPC52xx_PSC_SICR_SIM_UART               (0x0 << 24)
+#define MPC52xx_PSC_SICR_SIM_UART_DCD           (0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_8            (0x1 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_16           (0x2 << 24)
+#define MPC52xx_PSC_SICR_SIM_AC97               (0x3 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR                (0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR_DCD            (0xc << 24)
+#define MPC52xx_PSC_SICR_SIM_MIR                (0x5 << 24)
+#define MPC52xx_PSC_SICR_SIM_FIR                (0x6 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_24           (0x7 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_32           (0xf << 24)
+#define MPC52xx_PSC_SICR_GENCLK                 (1 << 23)
+#define MPC52xx_PSC_SICR_I2S                    (1 << 22)
+#define MPC52xx_PSC_SICR_CLKPOL                 (1 << 21)
+#define MPC52xx_PSC_SICR_SYNCPOL                (1 << 20)
+#define MPC52xx_PSC_SICR_CELLSLAVE              (1 << 19)
+#define MPC52xx_PSC_SICR_CELL2XCLK              (1 << 18)
+#define MPC52xx_PSC_SICR_ESAI                   (1 << 17)
+#define MPC52xx_PSC_SICR_ENAC97                 (1 << 16)
+#define MPC52xx_PSC_SICR_SPI                    (1 << 15)
+#define MPC52xx_PSC_SICR_MSTR                   (1 << 14)
+#define MPC52xx_PSC_SICR_CPOL                   (1 << 13)
+#define MPC52xx_PSC_SICR_CPHA                   (1 << 12)
+#define MPC52xx_PSC_SICR_USEEOF                 (1 << 11)
+#define MPC52xx_PSC_SICR_DISABLEEOF             (1 << 10)
 
 /* Structure of the hardware registers */
 struct mpc52xx_psc {
@@ -132,8 +162,12 @@ struct mpc52xx_psc {
         u8              reserved5[3];
         u8              ctlr;           /* PSC + 0x1c */
         u8              reserved6[3];
-        u16             ccr;            /* PSC + 0x20 */
-        u8              reserved7[14];
+        /* BitClkDiv field of CCR is byte swapped in
+         * the hardware for mpc5200/b compatibility */
+        u32             ccr;            /* PSC + 0x20 */
+        u32             ac97_slots;     /* PSC + 0x24 */
+        u32             ac97_cmd;       /* PSC + 0x28 */
+        u32             ac97_data;      /* PSC + 0x2c */
         u8              ivr;            /* PSC + 0x30 */
         u8              reserved8[3];
         u8              ip;             /* PSC + 0x34 */