aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/configs/at91sam9rlek_defconfig957
-rw-r--r--arch/arm/mach-at91/Kconfig14
-rw-r--r--arch/arm/mach-at91/Makefile3
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c204
4 files changed, 1178 insertions, 0 deletions
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
new file mode 100644
index 000000000000..fbe8b3049343
--- /dev/null
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -0,0 +1,957 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.21
4# Mon May 7 16:30:40 2007
5#
6CONFIG_ARM=y
7CONFIG_SYS_SUPPORTS_APM_EMULATION=y
8CONFIG_GENERIC_GPIO=y
9# CONFIG_GENERIC_TIME is not set
10CONFIG_MMU=y
11# CONFIG_NO_IOPORT is not set
12CONFIG_GENERIC_HARDIRQS=y
13CONFIG_TRACE_IRQFLAGS_SUPPORT=y
14CONFIG_HARDIRQS_SW_RESEND=y
15CONFIG_GENERIC_IRQ_PROBE=y
16CONFIG_RWSEM_GENERIC_SPINLOCK=y
17# CONFIG_ARCH_HAS_ILOG2_U32 is not set
18# CONFIG_ARCH_HAS_ILOG2_U64 is not set
19CONFIG_GENERIC_HWEIGHT=y
20CONFIG_GENERIC_CALIBRATE_DELAY=y
21CONFIG_ZONE_DMA=y
22CONFIG_VECTORS_BASE=0xffff0000
23CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
24
25#
26# Code maturity level options
27#
28CONFIG_EXPERIMENTAL=y
29CONFIG_BROKEN_ON_SMP=y
30CONFIG_INIT_ENV_ARG_LIMIT=32
31
32#
33# General setup
34#
35CONFIG_LOCALVERSION=""
36# CONFIG_LOCALVERSION_AUTO is not set
37# CONFIG_SWAP is not set
38CONFIG_SYSVIPC=y
39# CONFIG_IPC_NS is not set
40CONFIG_SYSVIPC_SYSCTL=y
41# CONFIG_POSIX_MQUEUE is not set
42# CONFIG_BSD_PROCESS_ACCT is not set
43# CONFIG_TASKSTATS is not set
44# CONFIG_UTS_NS is not set
45# CONFIG_AUDIT is not set
46# CONFIG_IKCONFIG is not set
47CONFIG_SYSFS_DEPRECATED=y
48# CONFIG_RELAY is not set
49CONFIG_BLK_DEV_INITRD=y
50CONFIG_INITRAMFS_SOURCE=""
51CONFIG_CC_OPTIMIZE_FOR_SIZE=y
52CONFIG_SYSCTL=y
53# CONFIG_EMBEDDED is not set
54CONFIG_UID16=y
55CONFIG_SYSCTL_SYSCALL=y
56CONFIG_KALLSYMS=y
57# CONFIG_KALLSYMS_ALL is not set
58# CONFIG_KALLSYMS_EXTRA_PASS is not set
59CONFIG_HOTPLUG=y
60CONFIG_PRINTK=y
61CONFIG_BUG=y
62CONFIG_ELF_CORE=y
63CONFIG_BASE_FULL=y
64CONFIG_FUTEX=y
65CONFIG_EPOLL=y
66CONFIG_SHMEM=y
67CONFIG_SLAB=y
68CONFIG_VM_EVENT_COUNTERS=y
69CONFIG_RT_MUTEXES=y
70# CONFIG_TINY_SHMEM is not set
71CONFIG_BASE_SMALL=0
72# CONFIG_SLOB is not set
73
74#
75# Loadable module support
76#
77CONFIG_MODULES=y
78CONFIG_MODULE_UNLOAD=y
79# CONFIG_MODULE_FORCE_UNLOAD is not set
80# CONFIG_MODVERSIONS is not set
81# CONFIG_MODULE_SRCVERSION_ALL is not set
82CONFIG_KMOD=y
83
84#
85# Block layer
86#
87CONFIG_BLOCK=y
88# CONFIG_LBD is not set
89# CONFIG_BLK_DEV_IO_TRACE is not set
90# CONFIG_LSF is not set
91
92#
93# IO Schedulers
94#
95CONFIG_IOSCHED_NOOP=y
96CONFIG_IOSCHED_AS=y
97# CONFIG_IOSCHED_DEADLINE is not set
98# CONFIG_IOSCHED_CFQ is not set
99CONFIG_DEFAULT_AS=y
100# CONFIG_DEFAULT_DEADLINE is not set
101# CONFIG_DEFAULT_CFQ is not set
102# CONFIG_DEFAULT_NOOP is not set
103CONFIG_DEFAULT_IOSCHED="anticipatory"
104
105#
106# System Type
107#
108# CONFIG_ARCH_AAEC2000 is not set
109# CONFIG_ARCH_INTEGRATOR is not set
110# CONFIG_ARCH_REALVIEW is not set
111# CONFIG_ARCH_VERSATILE is not set
112CONFIG_ARCH_AT91=y
113# CONFIG_ARCH_CLPS7500 is not set
114# CONFIG_ARCH_CLPS711X is not set
115# CONFIG_ARCH_CO285 is not set
116# CONFIG_ARCH_EBSA110 is not set
117# CONFIG_ARCH_EP93XX is not set
118# CONFIG_ARCH_FOOTBRIDGE is not set
119# CONFIG_ARCH_NETX is not set
120# CONFIG_ARCH_H720X is not set
121# CONFIG_ARCH_IMX is not set
122# CONFIG_ARCH_IOP32X is not set
123# CONFIG_ARCH_IOP33X is not set
124# CONFIG_ARCH_IOP13XX is not set
125# CONFIG_ARCH_IXP4XX is not set
126# CONFIG_ARCH_IXP2000 is not set
127# CONFIG_ARCH_IXP23XX is not set
128# CONFIG_ARCH_L7200 is not set
129# CONFIG_ARCH_NS9XXX is not set
130# CONFIG_ARCH_PNX4008 is not set
131# CONFIG_ARCH_PXA is not set
132# CONFIG_ARCH_RPC is not set
133# CONFIG_ARCH_SA1100 is not set
134# CONFIG_ARCH_S3C2410 is not set
135# CONFIG_ARCH_SHARK is not set
136# CONFIG_ARCH_LH7A40X is not set
137# CONFIG_ARCH_OMAP is not set
138
139#
140# Atmel AT91 System-on-Chip
141#
142# CONFIG_ARCH_AT91RM9200 is not set
143# CONFIG_ARCH_AT91SAM9260 is not set
144# CONFIG_ARCH_AT91SAM9261 is not set
145# CONFIG_ARCH_AT91SAM9263 is not set
146CONFIG_ARCH_AT91SAM9RL=y
147
148#
149# AT91SAM9RL Board Type
150#
151CONFIG_MACH_AT91SAM9RLEK=y
152
153#
154# AT91 Board Options
155#
156
157#
158# AT91 Feature Selections
159#
160# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
161
162#
163# Processor Type
164#
165CONFIG_CPU_32=y
166CONFIG_CPU_ARM926T=y
167CONFIG_CPU_32v5=y
168CONFIG_CPU_ABRT_EV5TJ=y
169CONFIG_CPU_CACHE_VIVT=y
170CONFIG_CPU_COPY_V4WB=y
171CONFIG_CPU_TLB_V4WBI=y
172CONFIG_CPU_CP15=y
173CONFIG_CPU_CP15_MMU=y
174
175#
176# Processor Features
177#
178# CONFIG_ARM_THUMB is not set
179# CONFIG_CPU_ICACHE_DISABLE is not set
180# CONFIG_CPU_DCACHE_DISABLE is not set
181# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
182# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
183# CONFIG_OUTER_CACHE is not set
184
185#
186# Bus support
187#
188
189#
190# PCCARD (PCMCIA/CardBus) support
191#
192# CONFIG_PCCARD is not set
193
194#
195# Kernel Features
196#
197# CONFIG_PREEMPT is not set
198# CONFIG_NO_IDLE_HZ is not set
199CONFIG_HZ=100
200# CONFIG_AEABI is not set
201# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
202CONFIG_SELECT_MEMORY_MODEL=y
203CONFIG_FLATMEM_MANUAL=y
204# CONFIG_DISCONTIGMEM_MANUAL is not set
205# CONFIG_SPARSEMEM_MANUAL is not set
206CONFIG_FLATMEM=y
207CONFIG_FLAT_NODE_MEM_MAP=y
208# CONFIG_SPARSEMEM_STATIC is not set
209CONFIG_SPLIT_PTLOCK_CPUS=4096
210# CONFIG_RESOURCES_64BIT is not set
211CONFIG_ZONE_DMA_FLAG=1
212# CONFIG_LEDS is not set
213CONFIG_ALIGNMENT_TRAP=y
214
215#
216# Boot options
217#
218CONFIG_ZBOOT_ROM_TEXT=0x0
219CONFIG_ZBOOT_ROM_BSS=0x0
220CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
221# CONFIG_XIP_KERNEL is not set
222# CONFIG_KEXEC is not set
223
224#
225# Floating point emulation
226#
227
228#
229# At least one emulation must be selected
230#
231CONFIG_FPE_NWFPE=y
232# CONFIG_FPE_NWFPE_XP is not set
233# CONFIG_FPE_FASTFPE is not set
234# CONFIG_VFP is not set
235
236#
237# Userspace binary formats
238#
239CONFIG_BINFMT_ELF=y
240# CONFIG_BINFMT_AOUT is not set
241# CONFIG_BINFMT_MISC is not set
242# CONFIG_ARTHUR is not set
243
244#
245# Power management options
246#
247# CONFIG_PM is not set
248
249#
250# Networking
251#
252CONFIG_NET=y
253
254#
255# Networking options
256#
257# CONFIG_NETDEBUG is not set
258# CONFIG_PACKET is not set
259CONFIG_UNIX=y
260# CONFIG_NET_KEY is not set
261# CONFIG_INET is not set
262# CONFIG_NETWORK_SECMARK is not set
263# CONFIG_NETFILTER is not set
264# CONFIG_ATM is not set
265# CONFIG_BRIDGE is not set
266# CONFIG_VLAN_8021Q is not set
267# CONFIG_DECNET is not set
268# CONFIG_LLC2 is not set
269# CONFIG_IPX is not set
270# CONFIG_ATALK is not set
271# CONFIG_X25 is not set
272# CONFIG_LAPB is not set
273# CONFIG_WAN_ROUTER is not set
274
275#
276# QoS and/or fair queueing
277#
278# CONFIG_NET_SCHED is not set
279
280#
281# Network testing
282#
283# CONFIG_NET_PKTGEN is not set
284# CONFIG_HAMRADIO is not set
285# CONFIG_IRDA is not set
286# CONFIG_BT is not set
287# CONFIG_IEEE80211 is not set
288
289#
290# Device Drivers
291#
292
293#
294# Generic Driver Options
295#
296CONFIG_STANDALONE=y
297CONFIG_PREVENT_FIRMWARE_BUILD=y
298# CONFIG_FW_LOADER is not set
299# CONFIG_DEBUG_DRIVER is not set
300# CONFIG_DEBUG_DEVRES is not set
301# CONFIG_SYS_HYPERVISOR is not set
302
303#
304# Connector - unified userspace <-> kernelspace linker
305#
306# CONFIG_CONNECTOR is not set
307
308#
309# Memory Technology Devices (MTD)
310#
311CONFIG_MTD=y
312# CONFIG_MTD_DEBUG is not set
313CONFIG_MTD_CONCAT=y
314CONFIG_MTD_PARTITIONS=y
315# CONFIG_MTD_REDBOOT_PARTS is not set
316CONFIG_MTD_CMDLINE_PARTS=y
317# CONFIG_MTD_AFS_PARTS is not set
318
319#
320# User Modules And Translation Layers
321#
322CONFIG_MTD_CHAR=y
323CONFIG_MTD_BLKDEVS=y
324CONFIG_MTD_BLOCK=y
325# CONFIG_FTL is not set
326# CONFIG_NFTL is not set
327# CONFIG_INFTL is not set
328# CONFIG_RFD_FTL is not set
329# CONFIG_SSFDC is not set
330
331#
332# RAM/ROM/Flash chip drivers
333#
334# CONFIG_MTD_CFI is not set
335# CONFIG_MTD_JEDECPROBE is not set
336CONFIG_MTD_MAP_BANK_WIDTH_1=y
337CONFIG_MTD_MAP_BANK_WIDTH_2=y
338CONFIG_MTD_MAP_BANK_WIDTH_4=y
339# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
340# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
341# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
342CONFIG_MTD_CFI_I1=y
343CONFIG_MTD_CFI_I2=y
344# CONFIG_MTD_CFI_I4 is not set
345# CONFIG_MTD_CFI_I8 is not set
346# CONFIG_MTD_RAM is not set
347# CONFIG_MTD_ROM is not set
348# CONFIG_MTD_ABSENT is not set
349# CONFIG_MTD_OBSOLETE_CHIPS is not set
350
351#
352# Mapping drivers for chip access
353#
354# CONFIG_MTD_COMPLEX_MAPPINGS is not set
355# CONFIG_MTD_PLATRAM is not set
356
357#
358# Self-contained MTD device drivers
359#
360CONFIG_MTD_DATAFLASH=y
361# CONFIG_MTD_M25P80 is not set
362# CONFIG_MTD_SLRAM is not set
363# CONFIG_MTD_PHRAM is not set
364# CONFIG_MTD_MTDRAM is not set
365# CONFIG_MTD_BLOCK2MTD is not set
366
367#
368# Disk-On-Chip Device Drivers
369#
370# CONFIG_MTD_DOC2000 is not set
371# CONFIG_MTD_DOC2001 is not set
372# CONFIG_MTD_DOC2001PLUS is not set
373
374#
375# NAND Flash Device Drivers
376#
377CONFIG_MTD_NAND=y
378# CONFIG_MTD_NAND_VERIFY_WRITE is not set
379# CONFIG_MTD_NAND_ECC_SMC is not set
380CONFIG_MTD_NAND_IDS=y
381# CONFIG_MTD_NAND_DISKONCHIP is not set
382CONFIG_MTD_NAND_AT91=y
383# CONFIG_MTD_NAND_NANDSIM is not set
384
385#
386# OneNAND Flash Device Drivers
387#
388# CONFIG_MTD_ONENAND is not set
389
390#
391# Parallel port support
392#
393# CONFIG_PARPORT is not set
394
395#
396# Plug and Play support
397#
398# CONFIG_PNPACPI is not set
399
400#
401# Block devices
402#
403# CONFIG_BLK_DEV_COW_COMMON is not set
404CONFIG_BLK_DEV_LOOP=y
405# CONFIG_BLK_DEV_CRYPTOLOOP is not set
406# CONFIG_BLK_DEV_NBD is not set
407CONFIG_BLK_DEV_RAM=y
408CONFIG_BLK_DEV_RAM_COUNT=4
409CONFIG_BLK_DEV_RAM_SIZE=24576
410CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
411# CONFIG_CDROM_PKTCDVD is not set
412# CONFIG_ATA_OVER_ETH is not set
413
414#
415# SCSI device support
416#
417# CONFIG_RAID_ATTRS is not set
418CONFIG_SCSI=y
419# CONFIG_SCSI_TGT is not set
420# CONFIG_SCSI_NETLINK is not set
421CONFIG_SCSI_PROC_FS=y
422
423#
424# SCSI support type (disk, tape, CD-ROM)
425#
426CONFIG_BLK_DEV_SD=y
427# CONFIG_CHR_DEV_ST is not set
428# CONFIG_CHR_DEV_OSST is not set
429# CONFIG_BLK_DEV_SR is not set
430# CONFIG_CHR_DEV_SG is not set
431# CONFIG_CHR_DEV_SCH is not set
432
433#
434# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
435#
436CONFIG_SCSI_MULTI_LUN=y
437# CONFIG_SCSI_CONSTANTS is not set
438# CONFIG_SCSI_LOGGING is not set
439# CONFIG_SCSI_SCAN_ASYNC is not set
440
441#
442# SCSI Transports
443#
444# CONFIG_SCSI_SPI_ATTRS is not set
445# CONFIG_SCSI_FC_ATTRS is not set
446# CONFIG_SCSI_ISCSI_ATTRS is not set
447# CONFIG_SCSI_SAS_ATTRS is not set
448# CONFIG_SCSI_SAS_LIBSAS is not set
449
450#
451# SCSI low-level drivers
452#
453# CONFIG_SCSI_DEBUG is not set
454
455#
456# Serial ATA (prod) and Parallel ATA (experimental) drivers
457#
458# CONFIG_ATA is not set
459
460#
461# Multi-device support (RAID and LVM)
462#
463# CONFIG_MD is not set
464
465#
466# Fusion MPT device support
467#
468# CONFIG_FUSION is not set
469
470#
471# IEEE 1394 (FireWire) support
472#
473
474#
475# I2O device support
476#
477
478#
479# Network device support
480#
481# CONFIG_NETDEVICES is not set
482# CONFIG_NETPOLL is not set
483# CONFIG_NET_POLL_CONTROLLER is not set
484
485#
486# ISDN subsystem
487#
488# CONFIG_ISDN is not set
489
490#
491# Input device support
492#
493CONFIG_INPUT=y
494# CONFIG_INPUT_FF_MEMLESS is not set
495
496#
497# Userland interfaces
498#
499CONFIG_INPUT_MOUSEDEV=y
500# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
501CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
502CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
503# CONFIG_INPUT_JOYDEV is not set
504# CONFIG_INPUT_TSDEV is not set
505CONFIG_INPUT_EVDEV=y
506# CONFIG_INPUT_EVBUG is not set
507
508#
509# Input Device Drivers
510#
511# CONFIG_INPUT_KEYBOARD is not set
512# CONFIG_INPUT_MOUSE is not set
513# CONFIG_INPUT_JOYSTICK is not set
514CONFIG_INPUT_TOUCHSCREEN=y
515# CONFIG_TOUCHSCREEN_ADS7846 is not set
516# CONFIG_TOUCHSCREEN_GUNZE is not set
517# CONFIG_TOUCHSCREEN_ELO is not set
518# CONFIG_TOUCHSCREEN_MTOUCH is not set
519# CONFIG_TOUCHSCREEN_MK712 is not set
520# CONFIG_TOUCHSCREEN_PENMOUNT is not set
521# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
522# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
523# CONFIG_TOUCHSCREEN_UCB1400 is not set
524# CONFIG_INPUT_MISC is not set
525
526#
527# Hardware I/O ports
528#
529# CONFIG_SERIO is not set
530# CONFIG_GAMEPORT is not set
531
532#
533# Character devices
534#
535CONFIG_VT=y
536CONFIG_VT_CONSOLE=y
537CONFIG_HW_CONSOLE=y
538# CONFIG_VT_HW_CONSOLE_BINDING is not set
539# CONFIG_SERIAL_NONSTANDARD is not set
540
541#
542# Serial drivers
543#
544# CONFIG_SERIAL_8250 is not set
545
546#
547# Non-8250 serial port support
548#
549CONFIG_SERIAL_ATMEL=y
550CONFIG_SERIAL_ATMEL_CONSOLE=y
551# CONFIG_SERIAL_ATMEL_TTYAT is not set
552CONFIG_SERIAL_CORE=y
553CONFIG_SERIAL_CORE_CONSOLE=y
554CONFIG_UNIX98_PTYS=y
555CONFIG_LEGACY_PTYS=y
556CONFIG_LEGACY_PTY_COUNT=256
557
558#
559# IPMI
560#
561# CONFIG_IPMI_HANDLER is not set
562
563#
564# Watchdog Cards
565#
566CONFIG_WATCHDOG=y
567CONFIG_WATCHDOG_NOWAYOUT=y
568
569#
570# Watchdog Device Drivers
571#
572# CONFIG_SOFT_WATCHDOG is not set
573CONFIG_HW_RANDOM=y
574# CONFIG_NVRAM is not set
575# CONFIG_DTLK is not set
576# CONFIG_R3964 is not set
577# CONFIG_RAW_DRIVER is not set
578
579#
580# TPM devices
581#
582# CONFIG_TCG_TPM is not set
583
584#
585# I2C support
586#
587# CONFIG_I2C is not set
588
589#
590# SPI support
591#
592CONFIG_SPI=y
593# CONFIG_SPI_DEBUG is not set
594CONFIG_SPI_MASTER=y
595
596#
597# SPI Master Controller Drivers
598#
599CONFIG_SPI_ATMEL=y
600# CONFIG_SPI_BITBANG is not set
601
602#
603# SPI Protocol Masters
604#
605# CONFIG_SPI_AT25 is not set
606
607#
608# Dallas's 1-wire bus
609#
610# CONFIG_W1 is not set
611
612#
613# Hardware Monitoring support
614#
615# CONFIG_HWMON is not set
616# CONFIG_HWMON_VID is not set
617
618#
619# Misc devices
620#
621
622#
623# Multifunction device drivers
624#
625# CONFIG_MFD_SM501 is not set
626
627#
628# LED devices
629#
630# CONFIG_NEW_LEDS is not set
631
632#
633# LED drivers
634#
635
636#
637# LED Triggers
638#
639
640#
641# Multimedia devices
642#
643# CONFIG_VIDEO_DEV is not set
644
645#
646# Digital Video Broadcasting Devices
647#
648
649#
650# Graphics support
651#
652# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
653CONFIG_FB=y
654# CONFIG_FIRMWARE_EDID is not set
655# CONFIG_FB_DDC is not set
656CONFIG_FB_CFB_FILLRECT=y
657CONFIG_FB_CFB_COPYAREA=y
658CONFIG_FB_CFB_IMAGEBLIT=y
659# CONFIG_FB_SVGALIB is not set
660# CONFIG_FB_MACMODES is not set
661# CONFIG_FB_BACKLIGHT is not set
662# CONFIG_FB_MODE_HELPERS is not set
663# CONFIG_FB_TILEBLITTING is not set
664
665#
666# Frame buffer hardware drivers
667#
668# CONFIG_FB_S1D13XXX is not set
669CONFIG_FB_ATMEL=y
670# CONFIG_FB_VIRTUAL is not set
671
672#
673# Console display driver support
674#
675# CONFIG_VGA_CONSOLE is not set
676CONFIG_DUMMY_CONSOLE=y
677# CONFIG_FRAMEBUFFER_CONSOLE is not set
678
679#
680# Logo configuration
681#
682# CONFIG_LOGO is not set
683
684#
685# Sound
686#
687CONFIG_SOUND=y
688
689#
690# Advanced Linux Sound Architecture
691#
692CONFIG_SND=y
693CONFIG_SND_TIMER=y
694CONFIG_SND_PCM=y
695CONFIG_SND_SEQUENCER=y
696CONFIG_SND_SEQ_DUMMY=y
697CONFIG_SND_OSSEMUL=y
698CONFIG_SND_MIXER_OSS=y
699CONFIG_SND_PCM_OSS=y
700CONFIG_SND_PCM_OSS_PLUGINS=y
701CONFIG_SND_SEQUENCER_OSS=y
702# CONFIG_SND_DYNAMIC_MINORS is not set
703CONFIG_SND_SUPPORT_OLD_API=y
704CONFIG_SND_VERBOSE_PROCFS=y
705CONFIG_SND_VERBOSE_PRINTK=y
706CONFIG_SND_DEBUG=y
707CONFIG_SND_DEBUG_DETECT=y
708# CONFIG_SND_PCM_XRUN_DEBUG is not set
709
710#
711# Generic devices
712#
713# CONFIG_SND_DUMMY is not set
714# CONFIG_SND_VIRMIDI is not set
715# CONFIG_SND_MTPAV is not set
716# CONFIG_SND_SERIAL_U16550 is not set
717# CONFIG_SND_MPU401 is not set
718
719#
720# ALSA ARM devices
721#
722
723#
724# SoC audio support
725#
726# CONFIG_SND_SOC is not set
727
728#
729# Open Sound System
730#
731# CONFIG_SOUND_PRIME is not set
732
733#
734# HID Devices
735#
736CONFIG_HID=y
737# CONFIG_HID_DEBUG is not set
738
739#
740# USB support
741#
742CONFIG_USB_ARCH_HAS_HCD=y
743CONFIG_USB_ARCH_HAS_OHCI=y
744# CONFIG_USB_ARCH_HAS_EHCI is not set
745# CONFIG_USB is not set
746
747#
748# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
749#
750
751#
752# USB Gadget Support
753#
754# CONFIG_USB_GADGET is not set
755
756#
757# MMC/SD Card support
758#
759CONFIG_MMC=y
760# CONFIG_MMC_DEBUG is not set
761CONFIG_MMC_BLOCK=y
762CONFIG_MMC_AT91=y
763
764#
765# Real Time Clock
766#
767CONFIG_RTC_LIB=y
768# CONFIG_RTC_CLASS is not set
769
770#
771# File systems
772#
773CONFIG_EXT2_FS=y
774# CONFIG_EXT2_FS_XATTR is not set
775# CONFIG_EXT2_FS_XIP is not set
776# CONFIG_EXT3_FS is not set
777# CONFIG_EXT4DEV_FS is not set
778# CONFIG_REISERFS_FS is not set
779# CONFIG_JFS_FS is not set
780# CONFIG_FS_POSIX_ACL is not set
781# CONFIG_XFS_FS is not set
782# CONFIG_GFS2_FS is not set
783# CONFIG_OCFS2_FS is not set
784# CONFIG_MINIX_FS is not set
785# CONFIG_ROMFS_FS is not set
786CONFIG_INOTIFY=y
787CONFIG_INOTIFY_USER=y
788# CONFIG_QUOTA is not set
789CONFIG_DNOTIFY=y
790# CONFIG_AUTOFS_FS is not set
791# CONFIG_AUTOFS4_FS is not set
792# CONFIG_FUSE_FS is not set
793
794#
795# CD-ROM/DVD Filesystems
796#
797# CONFIG_ISO9660_FS is not set
798# CONFIG_UDF_FS is not set
799
800#
801# DOS/FAT/NT Filesystems
802#
803CONFIG_FAT_FS=y
804CONFIG_MSDOS_FS=y
805CONFIG_VFAT_FS=y
806CONFIG_FAT_DEFAULT_CODEPAGE=437
807CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
808# CONFIG_NTFS_FS is not set
809
810#
811# Pseudo filesystems
812#
813CONFIG_PROC_FS=y
814CONFIG_PROC_SYSCTL=y
815CONFIG_SYSFS=y
816CONFIG_TMPFS=y
817# CONFIG_TMPFS_POSIX_ACL is not set
818# CONFIG_HUGETLB_PAGE is not set
819CONFIG_RAMFS=y
820# CONFIG_CONFIGFS_FS is not set
821
822#
823# Miscellaneous filesystems
824#
825# CONFIG_ADFS_FS is not set
826# CONFIG_AFFS_FS is not set
827# CONFIG_HFS_FS is not set
828# CONFIG_HFSPLUS_FS is not set
829# CONFIG_BEFS_FS is not set
830# CONFIG_BFS_FS is not set
831# CONFIG_EFS_FS is not set
832# CONFIG_JFFS2_FS is not set
833CONFIG_CRAMFS=y
834# CONFIG_VXFS_FS is not set
835# CONFIG_HPFS_FS is not set
836# CONFIG_QNX4FS_FS is not set
837# CONFIG_SYSV_FS is not set
838# CONFIG_UFS_FS is not set
839
840#
841# Network File Systems
842#
843
844#
845# Partition Types
846#
847# CONFIG_PARTITION_ADVANCED is not set
848CONFIG_MSDOS_PARTITION=y
849
850#
851# Native Language Support
852#
853CONFIG_NLS=y
854CONFIG_NLS_DEFAULT="iso8859-1"
855CONFIG_NLS_CODEPAGE_437=y
856# CONFIG_NLS_CODEPAGE_737 is not set
857# CONFIG_NLS_CODEPAGE_775 is not set
858CONFIG_NLS_CODEPAGE_850=y
859# CONFIG_NLS_CODEPAGE_852 is not set
860# CONFIG_NLS_CODEPAGE_855 is not set
861# CONFIG_NLS_CODEPAGE_857 is not set
862# CONFIG_NLS_CODEPAGE_860 is not set
863# CONFIG_NLS_CODEPAGE_861 is not set
864# CONFIG_NLS_CODEPAGE_862 is not set
865# CONFIG_NLS_CODEPAGE_863 is not set
866# CONFIG_NLS_CODEPAGE_864 is not set
867# CONFIG_NLS_CODEPAGE_865 is not set
868# CONFIG_NLS_CODEPAGE_866 is not set
869# CONFIG_NLS_CODEPAGE_869 is not set
870# CONFIG_NLS_CODEPAGE_936 is not set
871# CONFIG_NLS_CODEPAGE_950 is not set
872# CONFIG_NLS_CODEPAGE_932 is not set
873# CONFIG_NLS_CODEPAGE_949 is not set
874# CONFIG_NLS_CODEPAGE_874 is not set
875# CONFIG_NLS_ISO8859_8 is not set
876# CONFIG_NLS_CODEPAGE_1250 is not set
877# CONFIG_NLS_CODEPAGE_1251 is not set
878# CONFIG_NLS_ASCII is not set
879CONFIG_NLS_ISO8859_1=y
880# CONFIG_NLS_ISO8859_2 is not set
881# CONFIG_NLS_ISO8859_3 is not set
882# CONFIG_NLS_ISO8859_4 is not set
883# CONFIG_NLS_ISO8859_5 is not set
884# CONFIG_NLS_ISO8859_6 is not set
885# CONFIG_NLS_ISO8859_7 is not set
886# CONFIG_NLS_ISO8859_9 is not set
887# CONFIG_NLS_ISO8859_13 is not set
888# CONFIG_NLS_ISO8859_14 is not set
889CONFIG_NLS_ISO8859_15=y
890# CONFIG_NLS_KOI8_R is not set
891# CONFIG_NLS_KOI8_U is not set
892CONFIG_NLS_UTF8=y
893
894#
895# Profiling support
896#
897# CONFIG_PROFILING is not set
898
899#
900# Kernel hacking
901#
902# CONFIG_PRINTK_TIME is not set
903CONFIG_ENABLE_MUST_CHECK=y
904# CONFIG_MAGIC_SYSRQ is not set
905# CONFIG_UNUSED_SYMBOLS is not set
906# CONFIG_DEBUG_FS is not set
907# CONFIG_HEADERS_CHECK is not set
908CONFIG_DEBUG_KERNEL=y
909# CONFIG_DEBUG_SHIRQ is not set
910CONFIG_LOG_BUF_SHIFT=14
911CONFIG_DETECT_SOFTLOCKUP=y
912# CONFIG_SCHEDSTATS is not set
913# CONFIG_TIMER_STATS is not set
914# CONFIG_DEBUG_SLAB is not set
915# CONFIG_DEBUG_RT_MUTEXES is not set
916# CONFIG_RT_MUTEX_TESTER is not set
917# CONFIG_DEBUG_SPINLOCK is not set
918# CONFIG_DEBUG_MUTEXES is not set
919# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
920# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
921# CONFIG_DEBUG_KOBJECT is not set
922CONFIG_DEBUG_BUGVERBOSE=y
923CONFIG_DEBUG_INFO=y
924# CONFIG_DEBUG_VM is not set
925# CONFIG_DEBUG_LIST is not set
926CONFIG_FRAME_POINTER=y
927CONFIG_FORCED_INLINING=y
928# CONFIG_RCU_TORTURE_TEST is not set
929# CONFIG_FAULT_INJECTION is not set
930CONFIG_DEBUG_USER=y
931# CONFIG_DEBUG_ERRORS is not set
932CONFIG_DEBUG_LL=y
933# CONFIG_DEBUG_ICEDCC is not set
934
935#
936# Security options
937#
938# CONFIG_KEYS is not set
939# CONFIG_SECURITY is not set
940
941#
942# Cryptographic options
943#
944# CONFIG_CRYPTO is not set
945
946#
947# Library routines
948#
949CONFIG_BITREVERSE=y
950# CONFIG_CRC_CCITT is not set
951# CONFIG_CRC16 is not set
952CONFIG_CRC32=y
953# CONFIG_LIBCRC32C is not set
954CONFIG_ZLIB_INFLATE=y
955CONFIG_PLIST=y
956CONFIG_HAS_IOMEM=y
957CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 1ba120c5cd0c..a31157f1655a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -155,6 +155,20 @@ endif
155 155
156# ---------------------------------------------------------- 156# ----------------------------------------------------------
157 157
158if ARCH_AT91SAM9RL
159
160comment "AT91SAM9RL Board Type"
161
162config MACH_AT91SAM9RLEK
163 bool "Atmel AT91SAM9RL-EK Evaluation Kit"
164 depends on ARCH_AT91SAM9RL
165 help
166 Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
167
168endif
169
170# ----------------------------------------------------------
171
158comment "AT91 Board Options" 172comment "AT91 Board Options"
159 173
160config MTD_AT91_DATAFLASH_CARD 174config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 66d79e6c68a3..56b0d06c764b 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -37,6 +37,9 @@ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
37# AT91SAM9263 board-specific support 37# AT91SAM9263 board-specific support
38obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o 38obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
39 39
40# AT91SAM9RL board-specific support
41obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
42
40# LEDs support 43# LEDs support
41led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o 44led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
42led-$(CONFIG_MACH_AT91RM9200EK) += leds.o 45led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
new file mode 100644
index 000000000000..30c79aca84d4
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -0,0 +1,204 @@
1/*
2 * Copyright (C) 2005 SAN People
3 * Copyright (C) 2007 Atmel Corporation
4 *
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file COPYING in the main directory of this archive for
7 * more details.
8 */
9
10#include <linux/types.h>
11#include <linux/init.h>
12#include <linux/mm.h>
13#include <linux/module.h>
14#include <linux/platform_device.h>
15#include <linux/spi/spi.h>
16#include <linux/fb.h>
17#include <linux/clk.h>
18
19#include <video/atmel_lcdc.h>
20
21#include <asm/hardware.h>
22#include <asm/setup.h>
23#include <asm/mach-types.h>
24#include <asm/irq.h>
25
26#include <asm/mach/arch.h>
27#include <asm/mach/map.h>
28#include <asm/mach/irq.h>
29
30#include <asm/arch/board.h>
31#include <asm/arch/gpio.h>
32#include <asm/arch/at91sam926x_mc.h>
33
34#include "generic.h"
35
36
37/*
38 * Serial port configuration.
39 * 0 .. 3 = USART0 .. USART3
40 * 4 = DBGU
41 */
42static struct at91_uart_config __initdata ek_uart_config = {
43 .console_tty = 0, /* ttyS0 */
44 .nr_tty = 2,
45 .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
46};
47
48static void __init ek_map_io(void)
49{
50 /* Initialize processor: 12.000 MHz crystal */
51 at91sam9rl_initialize(12000000);
52
53 /* Setup the serial ports and console */
54 at91_init_serial(&ek_uart_config);
55}
56
57static void __init ek_init_irq(void)
58{
59 at91sam9rl_init_interrupts(NULL);
60}
61
62
63/*
64 * MCI (SD/MMC)
65 */
66static struct at91_mmc_data __initdata ek_mmc_data = {
67 .wire4 = 1,
68 .det_pin = AT91_PIN_PA15,
69// .wp_pin = ... not connected
70// .vcc_pin = ... not connected
71};
72
73
74/*
75 * NAND flash
76 */
77static struct mtd_partition __initdata ek_nand_partition[] = {
78 {
79 .name = "Partition 1",
80 .offset = 0,
81 .size = 256 * 1024,
82 },
83 {
84 .name = "Partition 2",
85 .offset = 256 * 1024 ,
86 .size = MTDPART_SIZ_FULL,
87 },
88};
89
90static struct mtd_partition *nand_partitions(int size, int *num_partitions)
91{
92 *num_partitions = ARRAY_SIZE(ek_nand_partition);
93 return ek_nand_partition;
94}
95
96static struct at91_nand_data __initdata ek_nand_data = {
97 .ale = 21,
98 .cle = 22,
99// .det_pin = ... not connected
100 .rdy_pin = AT91_PIN_PD17,
101 .enable_pin = AT91_PIN_PB6,
102 .partition_info = nand_partitions,
103 .bus_width_16 = 0,
104};
105
106
107/*
108 * SPI devices
109 */
110static struct spi_board_info ek_spi_devices[] = {
111 { /* DataFlash chip */
112 .modalias = "mtd_dataflash",
113 .chip_select = 0,
114 .max_speed_hz = 15 * 1000 * 1000,
115 .bus_num = 0,
116 },
117};
118
119
120/*
121 * LCD Controller
122 */
123#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
124static struct fb_videomode at91_tft_vga_modes[] = {
125 {
126 .name = "TX09D50VM1CCA @ 60",
127 .refresh = 60,
128 .xres = 240, .yres = 320,
129 .pixclock = KHZ2PICOS(4965),
130
131 .left_margin = 1, .right_margin = 33,
132 .upper_margin = 1, .lower_margin = 0,
133 .hsync_len = 5, .vsync_len = 1,
134
135 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
136 .vmode = FB_VMODE_NONINTERLACED,
137 },
138};
139
140static struct fb_monspecs at91fb_default_monspecs = {
141 .manufacturer = "HIT",
142 .monitor = "TX09D50VM1CCA",
143
144 .modedb = at91_tft_vga_modes,
145 .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
146 .hfmin = 15000,
147 .hfmax = 64000,
148 .vfmin = 50,
149 .vfmax = 150,
150};
151
152#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
153 | ATMEL_LCDC_DISTYPE_TFT \
154 | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
155
156static void at91_lcdc_power_control(int on)
157{
158 if (on)
159 at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
160 else
161 at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
162}
163
164/* Driver datas */
165static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
166 .default_bpp = 16,
167 .default_dmacon = ATMEL_LCDC_DMAEN,
168 .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
169 .default_monspecs = &at91fb_default_monspecs,
170 .atmel_lcdfb_power_control = at91_lcdc_power_control,
171 .guard_time = 1,
172};
173
174#else
175static struct atmel_lcdfb_info __initdata ek_lcdc_data;
176#endif
177
178
179static void __init ek_board_init(void)
180{
181 /* Serial */
182 at91_add_device_serial();
183 /* I2C */
184 at91_add_device_i2c();
185 /* NAND */
186 at91_add_device_nand(&ek_nand_data);
187 /* SPI */
188 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
189 /* MMC */
190 at91_add_device_mmc(0, &ek_mmc_data);
191 /* LCD Controller */
192 at91_add_device_lcdc(&ek_lcdc_data);
193}
194
195MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
196 /* Maintainer: Atmel */
197 .phys_io = AT91_BASE_SYS,
198 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
199 .boot_params = AT91_SDRAM_BASE + 0x100,
200 .timer = &at91sam926x_timer,
201 .map_io = ek_map_io,
202 .init_irq = ek_init_irq,
203 .init_machine = ek_board_init,
204MACHINE_END