3 files changed, 62 insertions, 34 deletions

diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 7fa0ec8d91cc..0caa3d955c3b 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -30,19 +30,56 @@
  *
  */
 
+/*
+ * Fix clock configuration.
+ *
+ * Firmware is supposed to be responsible for this.  If you are creating a
+ * new board port, do *NOT* duplicate this code.  Fix your boot firmware
+ * to set it correctly in the first place
+ */
+static void __init
+lite5200_fix_clock_config(void)
+{
+        struct mpc52xx_cdm  __iomem *cdm;
+
+        /* Map zones */
+        cdm = mpc52xx_find_and_map("mpc5200-cdm");
+        if (!cdm) {
+                printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
+                       __FUNCTION__);
+                return;
+        }
+
+        /* Use internal 48 Mhz */
+        out_8(&cdm->ext_48mhz_en, 0x00);
+        out_8(&cdm->fd_enable, 0x01);
+        if (in_be32(&cdm->rstcfg) & 0x40)       /* Assumes 33Mhz clock */
+                out_be16(&cdm->fd_counters, 0x0001);
+        else
+                out_be16(&cdm->fd_counters, 0x5555);
+
+        /* Unmap the regs */
+        iounmap(cdm);
+}
+
+/*
+ * Fix setting of port_config register.
+ *
+ * Firmware is supposed to be responsible for this.  If you are creating a
+ * new board port, do *NOT* duplicate this code.  Fix your boot firmware
+ * to set it correctly in the first place
+ */
 static void __init
-lite5200_setup_cpu(void)
+lite5200_fix_port_config(void)
 {
         struct mpc52xx_gpio __iomem *gpio;
         u32 port_config;
 
-        /* Map zones */
         gpio = mpc52xx_find_and_map("mpc5200-gpio");
         if (!gpio) {
-                printk(KERN_ERR __FILE__ ": "
-                        "Error while mapping GPIO register for port config. "
-                        "Expect some abnormal behavior\n");
-                goto error;
+                printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
+                       __FUNCTION__);
+                return;
         }
 
         /* Set port config */
@@ -61,7 +98,6 @@ lite5200_setup_cpu(void)
         out_be32(&gpio->port_config, port_config);
 
         /* Unmap zone */
-error:
         iounmap(gpio);
 }
 
@@ -100,9 +136,12 @@ static void __init lite5200_setup_arch(void)
         if (ppc_md.progress)
                 ppc_md.progress("lite5200_setup_arch()", 0);
 
-        /* CPU & Port mux setup */
-        mpc52xx_setup_cpu();    /* Generic */
-        lite5200_setup_cpu();   /* Platorm specific */
+        /* Fix things that firmware should have done. */
+        lite5200_fix_clock_config();
+        lite5200_fix_port_config();
+
+        /* Some mpc5200 & mpc5200b related configuration */
+        mpc5200_setup_xlb_arbiter();
 
 #ifdef CONFIG_PM
         mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 3eeb6c62e0ff..3bc201e07e6b 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -75,44 +75,33 @@ mpc52xx_find_ipb_freq(struct device_node *node)
 EXPORT_SYMBOL(mpc52xx_find_ipb_freq);
 
 
+/*
+ * Configure the XLB arbiter settings to match what Linux expects.
+ */
 void __init
-mpc52xx_setup_cpu(void)
+mpc5200_setup_xlb_arbiter(void)
 {
-        struct mpc52xx_cdm  __iomem *cdm;
         struct mpc52xx_xlb  __iomem *xlb;
 
-        /* Map zones */
-        cdm = mpc52xx_find_and_map("mpc5200-cdm");
         xlb = mpc52xx_find_and_map("mpc5200-xlb");
-
-        if (!cdm || !xlb) {
+        if (!xlb) {
                 printk(KERN_ERR __FILE__ ": "
-                        "Error while mapping CDM/XLB during mpc52xx_setup_cpu. "
+                        "Error mapping XLB in mpc52xx_setup_cpu().  "
                         "Expect some abnormal behavior\n");
-                goto unmap_regs;
+                return;
         }
 
-        /* Use internal 48 Mhz */
-        out_8(&cdm->ext_48mhz_en, 0x00);
-        out_8(&cdm->fd_enable, 0x01);
-        if (in_be32(&cdm->rstcfg) & 0x40)       /* Assumes 33Mhz clock */
-                out_be16(&cdm->fd_counters, 0x0001);
-        else
-                out_be16(&cdm->fd_counters, 0x5555);
-
         /* Configure the XLB Arbiter priorities */
         out_be32(&xlb->master_pri_enable, 0xff);
         out_be32(&xlb->master_priority, 0x11111111);
 
-        /* Disable XLB pipelining */
-        /* (cfr errate 292. We could do this only just before ATA PIO
-            transaction and re-enable it afterwards ...) */
+        /* Disable XLB pipelining
+         * (cfr errate 292. We could do this only just before ATA PIO
+         *  transaction and re-enable it afterwards ...)
+         */
         out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
 
-        /* Unmap zones */
-unmap_regs:
-        if (cdm) iounmap(cdm);
-        if (xlb) iounmap(xlb);
+        iounmap(xlb);
 }
 
 void __init
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index 1a3dbb743a3f..24751df791ac 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -243,7 +243,7 @@ struct mpc52xx_cdm {
 
 extern void __iomem * mpc52xx_find_and_map(const char *);
 extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
-extern void mpc52xx_setup_cpu(void);
+extern void mpc5200_setup_xlb_arbiter(void);
 extern void mpc52xx_declare_of_platform_devices(void);
 
 extern void mpc52xx_init_irq(void);