aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-pxa/Kconfig49
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/spitz.c380
-rw-r--r--include/asm-arm/arch-pxa/akita.h30
-rw-r--r--include/asm-arm/arch-pxa/spitz.h158
5 files changed, 609 insertions, 9 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 405a55f2287c..3e5f69bb5ac4 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -20,40 +20,66 @@ config ARCH_PXA_IDP
20 select PXA25x 20 select PXA25x
21 21
22config PXA_SHARPSL 22config PXA_SHARPSL
23 bool "SHARP SL-5600 and SL-C7xx Models" 23 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
24 select PXA25x
25 select SHARP_SCOOP 24 select SHARP_SCOOP
26 select SHARP_PARAM 25 select SHARP_PARAM
27 help 26 help
28 Say Y here if you intend to run this kernel on a 27 Say Y here if you intend to run this kernel on a
29 Sharp SL-5600 (Poodle), Sharp SL-C700 (Corgi), 28 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
30 SL-C750 (Shepherd) or a Sharp SL-C760 (Husky) 29 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
31 handheld computer. 30 SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer.
32 31
33endchoice 32endchoice
34 33
34if PXA_SHARPSL
35
36choice
37 prompt "Select target Sharp Zaurus device range"
38
39config PXA_SHARPSL_25x
40 bool "Sharp PXA25x models (SL-5600 and SL-C7xx)"
41 select PXA25x
42
43config PXA_SHARPSL_27x
44 bool "Sharp PXA270 models (SL-Cxx00)"
45 select PXA27x
46
47endchoice
48
49endif
50
35endmenu 51endmenu
36 52
37config MACH_POODLE 53config MACH_POODLE
38 bool "Enable Sharp SL-5600 (Poodle) Support" 54 bool "Enable Sharp SL-5600 (Poodle) Support"
39 depends PXA_SHARPSL 55 depends PXA_SHARPSL_25x
40 select SHARP_LOCOMO 56 select SHARP_LOCOMO
41 57
42config MACH_CORGI 58config MACH_CORGI
43 bool "Enable Sharp SL-C700 (Corgi) Support" 59 bool "Enable Sharp SL-C700 (Corgi) Support"
44 depends PXA_SHARPSL 60 depends PXA_SHARPSL_25x
45 select PXA_SHARP_C7xx 61 select PXA_SHARP_C7xx
46 62
47config MACH_SHEPHERD 63config MACH_SHEPHERD
48 bool "Enable Sharp SL-C750 (Shepherd) Support" 64 bool "Enable Sharp SL-C750 (Shepherd) Support"
49 depends PXA_SHARPSL 65 depends PXA_SHARPSL_25x
50 select PXA_SHARP_C7xx 66 select PXA_SHARP_C7xx
51 67
52config MACH_HUSKY 68config MACH_HUSKY
53 bool "Enable Sharp SL-C760 (Husky) Support" 69 bool "Enable Sharp SL-C760 (Husky) Support"
54 depends PXA_SHARPSL 70 depends PXA_SHARPSL_25x
55 select PXA_SHARP_C7xx 71 select PXA_SHARP_C7xx
56 72
73config MACH_SPITZ
74 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
75 depends PXA_SHARPSL_27x
76 select PXA_SHARP_Cxx00
77
78config MACH_BORZOI
79 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
80 depends PXA_SHARPSL_27x
81 select PXA_SHARP_Cxx00
82
57config PXA25x 83config PXA25x
58 bool 84 bool
59 help 85 help
@@ -74,4 +100,9 @@ config PXA_SHARP_C7xx
74 help 100 help
75 Enable support for all Sharp C7xx models 101 Enable support for all Sharp C7xx models
76 102
103config PXA_SHARP_Cxx00
104 bool
105 help
106 Enable common support for Sharp Cxx00 models
107
77endif 108endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 33dae99ec2d8..f609a0f232cb 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
12obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o 12obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
13obj-$(CONFIG_ARCH_PXA_IDP) += idp.o 13obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
14obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o 14obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o
15obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o
15obj-$(CONFIG_MACH_POODLE) += poodle.o 16obj-$(CONFIG_MACH_POODLE) += poodle.o
16 17
17# Support for blinky lights 18# Support for blinky lights
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
new file mode 100644
index 000000000000..568afe3d6e1a
--- /dev/null
+++ b/arch/arm/mach-pxa/spitz.c
@@ -0,0 +1,380 @@
1/*
2 * Support for Sharp SL-Cxx00 Series of PDAs
3 * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
4 *
5 * Copyright (c) 2005 Richard Purdie
6 *
7 * Based on Sharp's 2.4 kernel patches/lubbock.c
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/init.h>
17#include <linux/device.h>
18#include <linux/delay.h>
19#include <linux/major.h>
20#include <linux/fs.h>
21#include <linux/interrupt.h>
22#include <linux/mmc/host.h>
23
24#include <asm/setup.h>
25#include <asm/memory.h>
26#include <asm/mach-types.h>
27#include <asm/hardware.h>
28#include <asm/irq.h>
29#include <asm/io.h>
30
31#include <asm/mach/arch.h>
32#include <asm/mach/map.h>
33#include <asm/mach/irq.h>
34
35#include <asm/arch/pxa-regs.h>
36#include <asm/arch/irq.h>
37#include <asm/arch/mmc.h>
38#include <asm/arch/udc.h>
39#include <asm/arch/ohci.h>
40#include <asm/arch/pxafb.h>
41#include <asm/arch/akita.h>
42#include <asm/arch/spitz.h>
43#include <asm/arch/sharpsl.h>
44
45#include <asm/mach/sharpsl_param.h>
46#include <asm/hardware/scoop.h>
47
48#include "generic.h"
49#include "sharpsl.h"
50
51/*
52 * Spitz SCOOP Device #1
53 */
54static struct resource spitz_scoop_resources[] = {
55 [0] = {
56 .start = 0x10800000,
57 .end = 0x10800fff,
58 .flags = IORESOURCE_MEM,
59 },
60};
61
62static struct scoop_config spitz_scoop_setup = {
63 .io_dir = SPITZ_SCP_IO_DIR,
64 .io_out = SPITZ_SCP_IO_OUT,
65 .suspend_clr = SPITZ_SCP_SUS_CLR,
66 .suspend_set = SPITZ_SCP_SUS_SET,
67};
68
69struct platform_device spitzscoop_device = {
70 .name = "sharp-scoop",
71 .id = 0,
72 .dev = {
73 .platform_data = &spitz_scoop_setup,
74 },
75 .num_resources = ARRAY_SIZE(spitz_scoop_resources),
76 .resource = spitz_scoop_resources,
77};
78
79/*
80 * Spitz SCOOP Device #2
81 */
82static struct resource spitz_scoop2_resources[] = {
83 [0] = {
84 .start = 0x08800040,
85 .end = 0x08800fff,
86 .flags = IORESOURCE_MEM,
87 },
88};
89
90static struct scoop_config spitz_scoop2_setup = {
91 .io_dir = SPITZ_SCP2_IO_DIR,
92 .io_out = SPITZ_SCP2_IO_OUT,
93 .suspend_clr = SPITZ_SCP2_SUS_CLR,
94 .suspend_set = SPITZ_SCP2_SUS_SET,
95};
96
97struct platform_device spitzscoop2_device = {
98 .name = "sharp-scoop",
99 .id = 1,
100 .dev = {
101 .platform_data = &spitz_scoop2_setup,
102 },
103 .num_resources = ARRAY_SIZE(spitz_scoop2_resources),
104 .resource = spitz_scoop2_resources,
105};
106
107static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
108{
109 .dev = &spitzscoop_device.dev,
110 .irq = SPITZ_IRQ_GPIO_CF_IRQ,
111 .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
112 .cd_irq_str = "PCMCIA0 CD",
113},{
114 .dev = &spitzscoop2_device.dev,
115 .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
116 .cd_irq = -1,
117},
118};
119
120
121/*
122 * Spitz SSP Device
123 *
124 * Set the parent as the scoop device because a lot of SSP devices
125 * also use scoop functions and this makes the power up/down order
126 * work correctly.
127 */
128struct platform_device spitzssp_device = {
129 .name = "corgi-ssp",
130 .dev = {
131 .parent = &spitzscoop_device.dev,
132 },
133 .id = -1,
134};
135
136struct corgissp_machinfo spitz_ssp_machinfo = {
137 .port = 2,
138 .cs_lcdcon = SPITZ_GPIO_LCDCON_CS,
139 .cs_ads7846 = SPITZ_GPIO_ADS7846_CS,
140 .cs_max1111 = SPITZ_GPIO_MAX1111_CS,
141 .clk_lcdcon = 520,
142 .clk_ads7846 = 14,
143 .clk_max1111 = 56,
144};
145
146
147/*
148 * Spitz Backlight Device
149 */
150static struct corgibl_machinfo spitz_bl_machinfo = {
151 .max_intensity = 0x2f,
152};
153
154static struct platform_device spitzbl_device = {
155 .name = "corgi-bl",
156 .dev = {
157 .platform_data = &spitz_bl_machinfo,
158 },
159 .id = -1,
160};
161
162
163/*
164 * Spitz Keyboard Device
165 */
166static struct platform_device spitzkbd_device = {
167 .name = "spitz-keyboard",
168 .id = -1,
169};
170
171
172/*
173 * Spitz Touch Screen Device
174 */
175static struct resource spitzts_resources[] = {
176 [0] = {
177 .start = SPITZ_IRQ_GPIO_TP_INT,
178 .end = SPITZ_IRQ_GPIO_TP_INT,
179 .flags = IORESOURCE_IRQ,
180 },
181};
182
183static struct corgits_machinfo spitz_ts_machinfo = {
184 .get_hsync_len = spitz_get_hsync_len,
185 .put_hsync = spitz_put_hsync,
186 .wait_hsync = spitz_wait_hsync,
187};
188
189static struct platform_device spitzts_device = {
190 .name = "corgi-ts",
191 .dev = {
192 .parent = &spitzssp_device.dev,
193 .platform_data = &spitz_ts_machinfo,
194 },
195 .id = -1,
196 .num_resources = ARRAY_SIZE(spitzts_resources),
197 .resource = spitzts_resources,
198};
199
200
201/*
202 * MMC/SD Device
203 *
204 * The card detect interrupt isn't debounced so we delay it by 250ms
205 * to give the card a chance to fully insert/eject.
206 */
207
208static struct pxamci_platform_data spitz_mci_platform_data;
209
210static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(int, void *, struct pt_regs *), void *data)
211{
212 int err;
213
214 /* setup GPIO for PXA27x MMC controller */
215 pxa_gpio_mode(GPIO32_MMCCLK_MD);
216 pxa_gpio_mode(GPIO112_MMCCMD_MD);
217 pxa_gpio_mode(GPIO92_MMCDAT0_MD);
218 pxa_gpio_mode(GPIO109_MMCDAT1_MD);
219 pxa_gpio_mode(GPIO110_MMCDAT2_MD);
220 pxa_gpio_mode(GPIO111_MMCDAT3_MD);
221 pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
222 pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
223
224 spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
225
226 err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, SA_INTERRUPT,
227 "MMC card detect", data);
228 if (err) {
229 printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
230 return -1;
231 }
232
233 set_irq_type(SPITZ_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
234
235 return 0;
236}
237
238/* Power control is shared with one of the CF slots so we have a mess */
239static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
240{
241 struct pxamci_platform_data* p_d = dev->platform_data;
242
243 unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
244
245 if (( 1 << vdd) & p_d->ocr_mask) {
246 /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */
247 set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
248 mdelay(2);
249 write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04);
250 } else {
251 /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */
252 write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04);
253
254 if (!(cpr | 0x02)) {
255 mdelay(1);
256 reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
257 }
258 }
259}
260
261static int spitz_mci_get_ro(struct device *dev)
262{
263 return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
264}
265
266static void spitz_mci_exit(struct device *dev, void *data)
267{
268 free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
269}
270
271static struct pxamci_platform_data spitz_mci_platform_data = {
272 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
273 .init = spitz_mci_init,
274 .get_ro = spitz_mci_get_ro,
275 .setpower = spitz_mci_setpower,
276 .exit = spitz_mci_exit,
277};
278
279
280/*
281 * Spitz PXA Framebuffer
282 */
283static struct pxafb_mach_info spitz_pxafb_info __initdata = {
284 .pixclock = 19231,
285 .xres = 480,
286 .yres = 640,
287 .bpp = 16,
288 .hsync_len = 40,
289 .left_margin = 46,
290 .right_margin = 125,
291 .vsync_len = 3,
292 .upper_margin = 1,
293 .lower_margin = 0,
294 .sync = 0,
295 .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
296 .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH,
297 .pxafb_lcd_power = spitz_lcd_power,
298};
299
300
301static struct platform_device *devices[] __initdata = {
302 &spitzscoop_device,
303 &spitzssp_device,
304 &spitzkbd_device,
305 &spitzts_device,
306 &spitzbl_device,
307 &spitzbattery_device,
308};
309
310static void __init common_init(void)
311{
312 PMCR = 0x00;
313
314 /* setup sleep mode values */
315 PWER = 0x00000002;
316 PFER = 0x00000000;
317 PRER = 0x00000002;
318 PGSR0 = 0x0158C000;
319 PGSR1 = 0x00FF0080;
320 PGSR2 = 0x0001C004;
321
322 /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
323 PCFR |= PCFR_OPDE;
324
325 corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
326
327 pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
328
329 platform_add_devices(devices, ARRAY_SIZE(devices));
330 pxa_set_mci_info(&spitz_mci_platform_data);
331 pxafb_device.dev.parent = &spitzssp_device.dev;
332 set_pxa_fb_info(&spitz_pxafb_info);
333}
334
335static void __init spitz_init(void)
336{
337 scoop_num = 2;
338 scoop_devs = &spitz_pcmcia_scoop[0];
339 spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
340
341 common_init();
342
343 platform_device_register(&spitzscoop2_device);
344}
345
346static void __init fixup_spitz(struct machine_desc *desc,
347 struct tag *tags, char **cmdline, struct meminfo *mi)
348{
349 sharpsl_save_param();
350 mi->nr_banks = 1;
351 mi->bank[0].start = 0xa0000000;
352 mi->bank[0].node = 0;
353 mi->bank[0].size = (64*1024*1024);
354}
355
356#ifdef CONFIG_MACH_SPITZ
357MACHINE_START(SPITZ, "SHARP Spitz")
358 .phys_ram = 0xa0000000,
359 .phys_io = 0x40000000,
360 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
361 .fixup = fixup_spitz,
362 .map_io = pxa_map_io,
363 .init_irq = pxa_init_irq,
364 .init_machine = spitz_init,
365 .timer = &pxa_timer,
366MACHINE_END
367#endif
368
369#ifdef CONFIG_MACH_BORZOI
370MACHINE_START(BORZOI, "SHARP Borzoi")
371 .phys_ram = 0xa0000000,
372 .phys_io = 0x40000000,
373 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
374 .fixup = fixup_spitz,
375 .map_io = pxa_map_io,
376 .init_irq = pxa_init_irq,
377 .init_machine = spitz_init,
378 .timer = &pxa_timer,
379MACHINE_END
380#endif
diff --git a/include/asm-arm/arch-pxa/akita.h b/include/asm-arm/arch-pxa/akita.h
new file mode 100644
index 000000000000..4a1fbcfccc39
--- /dev/null
+++ b/include/asm-arm/arch-pxa/akita.h
@@ -0,0 +1,30 @@
1/*
2 * Hardware specific definitions for SL-C1000 (Akita)
3 *
4 * Copyright (c) 2005 Richard Purdie
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 */
11
12/* Akita IO Expander GPIOs */
13
14#define AKITA_IOEXP_RESERVED_7 (1 << 7)
15#define AKITA_IOEXP_IR_ON (1 << 6)
16#define AKITA_IOEXP_AKIN_PULLUP (1 << 5)
17#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4)
18#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3)
19#define AKITA_IOEXP_MIC_BIAS (1 << 2)
20#define AKITA_IOEXP_RESERVED_1 (1 << 1)
21#define AKITA_IOEXP_RESERVED_0 (1 << 0)
22
23/* Direction Bitfield 0=output 1=input */
24#define AKITA_IOEXP_IO_DIR 0
25/* Default Values */
26#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
27
28void akita_set_ioexp(struct device *dev, unsigned char bitmask);
29void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
30
diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h
new file mode 100644
index 000000000000..62e1fe4d025f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/spitz.h
@@ -0,0 +1,158 @@
1/*
2 * Hardware specific definitions for SL-Cx000 series of PDAs
3 *
4 * Copyright (c) 2005 Alexander Wykes
5 * Copyright (c) 2005 Richard Purdie
6 *
7 * Based on Sharp's 2.4 kernel patches
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14#ifndef __ASM_ARCH_SPITZ_H
15#define __ASM_ARCH_SPITZ_H 1
16#endif
17
18/* Spitz/Akita GPIOs */
19
20#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */
21#define SPITZ_GPIO_RESET (1)
22#define SPITZ_GPIO_nSD_DETECT (9)
23#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */
24#define SPITZ_GPIO_AK_INT (13) /* Remote Control */
25#define SPITZ_GPIO_ADS7846_CS (14)
26#define SPITZ_GPIO_SYNC (16)
27#define SPITZ_GPIO_MAX1111_CS (20)
28#define SPITZ_GPIO_FATAL_BAT (21)
29#define SPITZ_GPIO_HSYNC (22)
30#define SPITZ_GPIO_nSD_CLK (32)
31#define SPITZ_GPIO_USB_DEVICE (35)
32#define SPITZ_GPIO_USB_HOST (37)
33#define SPITZ_GPIO_USB_CONNECT (41)
34#define SPITZ_GPIO_LCDCON_CS (53)
35#define SPITZ_GPIO_nPCE (54)
36#define SPITZ_GPIO_nSD_WP (81)
37#define SPITZ_GPIO_ON_RESET (89)
38#define SPITZ_GPIO_BAT_COVER (90)
39#define SPITZ_GPIO_CF_CD (94)
40#define SPITZ_GPIO_ON_KEY (95)
41#define SPITZ_GPIO_SWA (97)
42#define SPITZ_GPIO_SWB (96)
43#define SPITZ_GPIO_CHRG_FULL (101)
44#define SPITZ_GPIO_CO (101)
45#define SPITZ_GPIO_CF_IRQ (105)
46#define SPITZ_GPIO_AC_IN (115)
47#define SPITZ_GPIO_HP_IN (116)
48
49/* Spitz Only GPIOs */
50
51#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */
52#define SPITZ_GPIO_CF2_CD (93)
53
54
55/* Spitz/Akita Keyboard Definitions */
56
57#define SPITZ_KEY_STROBE_NUM (11)
58#define SPITZ_KEY_SENSE_NUM (7)
59#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000
60#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000
61#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000
62#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880
63#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000
64#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4
65#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000
66#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000
67
68#define SPITZ_GPIO_KEY_STROBE0 88
69#define SPITZ_GPIO_KEY_STROBE1 23
70#define SPITZ_GPIO_KEY_STROBE2 24
71#define SPITZ_GPIO_KEY_STROBE3 25
72#define SPITZ_GPIO_KEY_STROBE4 26
73#define SPITZ_GPIO_KEY_STROBE5 27
74#define SPITZ_GPIO_KEY_STROBE6 52
75#define SPITZ_GPIO_KEY_STROBE7 103
76#define SPITZ_GPIO_KEY_STROBE8 107
77#define SPITZ_GPIO_KEY_STROBE9 108
78#define SPITZ_GPIO_KEY_STROBE10 114
79
80#define SPITZ_GPIO_KEY_SENSE0 12
81#define SPITZ_GPIO_KEY_SENSE1 17
82#define SPITZ_GPIO_KEY_SENSE2 91
83#define SPITZ_GPIO_KEY_SENSE3 34
84#define SPITZ_GPIO_KEY_SENSE4 36
85#define SPITZ_GPIO_KEY_SENSE5 38
86#define SPITZ_GPIO_KEY_SENSE6 39
87
88
89/* Spitz Scoop Device (No. 1) GPIOs */
90/* Suspend States in comments */
91#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */
92#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */
93#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */
94#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */
95#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */
96#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */
97#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */
98#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */
99#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */
100
101#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
102 SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
103 SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
104#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
105#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
106#define SPITZ_SCP_SUS_SET 0
107
108/* Spitz Scoop Device (No. 2) GPIOs */
109/* Suspend States in comments */
110#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */
111#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */
112#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */
113#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */
114#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */
115#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */
116#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */
117#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */
118#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */
119
120#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
121 SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
122 SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
123
124#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
125#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
126 SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
127#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
128
129
130/* Spitz IRQ Definitions */
131
132#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT)
133#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN)
134#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT)
135#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN)
136#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT)
137#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC)
138#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY)
139#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA)
140#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB)
141#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
142#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
143#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO)
144#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
145#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD)
146#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
147#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT)
148#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
149
150/*
151 * Shared data structures
152 */
153extern struct platform_device spitzscoop_device;
154extern struct platform_device spitzscoop2_device;
155extern struct platform_device spitzssp_device;
156extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
157
158extern void spitz_lcd_power(int on);
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-26 18:33:20 -0400