83 files changed, 5106 insertions, 570 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 16129e67678a..6150c80bccf6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -771,6 +771,14 @@ ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 M:      Michael Petchkovsky <mkpetch@internode.on.net>
 S:      Maintained
+ARM/NOMADIK ARCHITECTURE
+M:     Alessandro Rubini <rubini@unipv.it>
+M:     STEricsson <STEricsson_nomadik_linux@list.st.com>
+L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:     Maintained
+F:     arch/arm/mach-nomadik/
+F:     arch/arm/plat-nomadik/
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 M:      Nelson Castillo <arhuaco@freaks-unidos.net>
 L:      openmoko-kernel@lists.openmoko.org (subscribers-only)
@@ -915,6 +923,12 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:      http://www.mcuos.com
 S:      Maintained
+ARM/U8500 ARM ARCHITECTURE
+M:      Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:      Maintained
+F:      arch/arm/mach-ux500/
 ARM/VFP SUPPORT
 M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c60040..1ae18d879e12 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,16 @@ config ARCH_BCMRING
        help
          Support for Broadcom's BCMRing platform.
+config ARCH_U8500
+        bool "ST-Ericsson U8500 Series"
+        select CPU_V7
+        select ARM_AMBA
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select COMMON_CLKDEV
+        help
+          Support for ST-Ericsson's Ux500 architecture
 endchoice
 source "arch/arm/mach-clps711x/Kconfig"
@@ -787,6 +797,7 @@ source "arch/arm/mach-at91/Kconfig"
 source "arch/arm/plat-mxc/Kconfig"
 source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
 source "arch/arm/mach-netx/Kconfig"
@@ -804,6 +815,8 @@ source "arch/arm/mach-w90x900/Kconfig"
 source "arch/arm/mach-bcmring/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 # Definitions to make life easier
 config ARCH_ACORN
        bool
@@ -955,10 +968,10 @@ source "kernel/time/Kconfig"
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
        depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
        depends on GENERIC_CLOCKEVENTS
        select USE_GENERIC_SMP_HELPERS
-        select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+        select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1040,9 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
        bool "Use local timer interrupts"
        depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-                REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+                REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
        default y
-        select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+        select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
        help
          Enable support for local timers on SMP platforms, rather then the
          legacy IPI broadcast method.  Local timers allows the system
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf66763..7603eba7c0cd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -166,6 +166,7 @@ machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)         := stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)         := stmp37xx
 machine-$(CONFIG_ARCH_U300)             := u300
+machine-$(CONFIG_ARCH_U8500)            := ux500
 machine-$(CONFIG_ARCH_VERSATILE)        := versatile
 machine-$(CONFIG_ARCH_W90X900)          := w90x900
 machine-$(CONFIG_FOOTBRIDGE)            := footbridge
@@ -176,6 +177,7 @@ machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 plat-$(CONFIG_ARCH_MXC)         := mxc
 plat-$(CONFIG_ARCH_OMAP)        := omap
 plat-$(CONFIG_PLAT_IOP)         := iop
+plat-$(CONFIG_PLAT_NOMADIK)     := nomadik
 plat-$(CONFIG_PLAT_ORION)       := orion
 plat-$(CONFIG_PLAT_PXA)         := pxa
 plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx s3c
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac9135998..5a375e5fef21 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -342,6 +342,22 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 }
 EXPORT_SYMBOL(dma_map_single);
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer.  (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+                enum dma_data_direction dir)
+{
+        dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+                __func__, (void *) dma_addr, size, dir);
+        unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
                unsigned long offset, size_t size, enum dma_data_direction dir)
 {
@@ -366,8 +382,7 @@ EXPORT_SYMBOL(dma_map_page);
 * the safe buffer.  (basically return things back to the way they
 * should be)
 */
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
                enum dma_data_direction dir)
 {
        dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +390,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
        unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
 int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
                unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 238b218394e3..c97e1022ada1 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -120,6 +120,7 @@ CONFIG_ARCH_AT91RM9200DK=y
 # CONFIG_MACH_CARMEVA is not set
 # CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+CONFIG_MACH_ECO920=y
 #
 # AT91RM9200 Feature Selections
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
index 5245655a0ad3..5245655a0ad3 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 000000000000..df1de9b45ca4
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 000000000000..4b2cd9eae9bc
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 000000000000..15fde22ce3f3
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,680 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+#
+# ST-Ericsson platform type
+#
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3d0cdd21b882..9fd6d3ab68c0 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -331,15 +331,15 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 * Convert calls to our calling convention.
 */
 #define flush_cache_all()               __cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
 {
        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
                __cpuc_flush_user_all();
 }
 static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
                __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +347,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 }
 static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
                unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +356,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l
 }
 static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                         unsigned long uaddr, void *kaddr,
                         unsigned long len, int write)
 {
@@ -365,6 +365,16 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                __cpuc_coherent_kern_range(addr, addr + len);
        }
 }
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+                vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+                vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+                vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+                vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -410,8 +420,6 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 */
 extern void flush_dcache_page(struct page *);
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
 static inline void __flush_icache_all(void)
 {
 #ifdef CONFIG_ARM_ERRATA_411920
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa68a97..a96300bf83fd 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
 * must not be used by drivers.
 */
 #ifndef __arch_page_to_dma
-#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
-        return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+        return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
 }
-#elif defined(__pfn_to_bus)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
 {
-        return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+        return pfn_to_page(__bus_to_pfn(addr));
 }
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -45,6 +40,11 @@ static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
        return __arch_page_to_dma(dev, page);
 }
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+        return __arch_dma_to_page(dev, addr);
+}
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
        return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
 */
 extern dma_addr_t dma_map_single(struct device *, void *, size_t,
                enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+                enum dma_data_direction);
 extern dma_addr_t dma_map_page(struct device *, struct page *,
                unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
                enum dma_data_direction);
 /*
@@ -352,7 +354,6 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 {
        /* nothing to do */
 }
-#endif /* CONFIG_DMABOUNCE */
 /**
 * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
                size_t size, enum dma_data_direction dir)
 {
-        dma_unmap_single(dev, handle, size, dir);
+        /* nothing to do */
 }
+#endif /* CONFIG_DMABOUNCE */
 /**
 * dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf062138..5421d82a2572 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
 * private definitions which should NOT be used outside memory.h
 * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
 */
+#ifndef __virt_to_phys
 #define __virt_to_phys(x)       ((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)       ((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
 /*
 * Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
 #define __phys_to_pfn(paddr)    ((paddr) >> PAGE_SHIFT)
 #define __pfn_to_phys(pfn)      ((pfn) << PAGE_SHIFT)
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)      (__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)      (pfn_to_page(__phys_to_pfn(phys)))
 #ifndef __ASSEMBLY__
 /*
@@ -194,7 +202,8 @@ static inline void *phys_to_virt(unsigned long x)
 #ifndef __virt_to_bus
 #define __virt_to_bus   __virt_to_phys
 #define __bus_to_virt   __phys_to_virt
-#define __pfn_to_bus(x) ((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x) __phys_to_pfn(x)
 #endif
 static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #endif /* !CONFIG_DISCONTIGMEM */
 /*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
-/*
 * Optional coherency support.  Currently used only by selected
 * Intel XSC3-based systems.
 */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa11f61..11397687f42c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@ PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __pgprot_modify(prot,mask,bits)         \
+        __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
 /*
 * Mark the prot value as uncacheable and unbufferable.
 */
 #define pgprot_noncached(prot) \
-        __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+        __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
-        __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+        __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+        __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+        __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
 #define pmd_none(pmd)           (!pmd_val(pmd))
 #define pmd_present(pmd)        (pmd_val(pmd))
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f6d6ea..9997ad20eff1 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
 #  define __SWAB_64_THRU_32__
 #endif
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+        __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+        return x;
+}
+#define __arch_swab16 __arch_swab16
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+        __asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+        return x;
+}
+#define __arch_swab32 __arch_swab32
+#else
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
        __u32 t;
@@ -48,3 +66,4 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 #endif
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5bf41f..058e7e90881d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()            dmb()
+#define rmb()           dmb()
+#define wmb()           dmb()
+#else
 #define mb()    do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()   do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()   do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+#ifndef CONFIG_SMP
 #define smp_mb()        barrier()
 #define smp_rmb()       barrier()
 #define smp_wmb()       barrier()
 #else
-#define mb()            dmb()
+#define smp_mb()        mb()
-#define rmb()           dmb()
+#define smp_rmb()       rmb()
-#define wmb()           dmb()
+#define smp_wmb()       wmb()
-#define smp_mb()        dmb()
-#define smp_rmb()       dmb()
-#define smp_wmb()       dmb()
 #endif
 #define read_barrier_depends()          do { } while(0)
 #define smp_read_barrier_depends()      do { } while(0)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2fd88437348b..c71e39ed092f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -163,6 +163,11 @@ config MACH_CPUAT91
          Select this if you are using the Eukrea Electromatique's
          CPUAT91 board <http://www.eukrea.com/>.
+config MACH_ECO920
+        bool "eco920"
+        help
+          Select this if you are using the eco920 board
 endif
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ada440aab0c5..709fbad4a3ee 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)      += board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)       += board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)      += board-cpuat91.o
+obj-$(CONFIG_MACH_ECO920)       += board-eco920.o
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -77,6 +78,7 @@ obj-y				+= leds.o
 # Power Management
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)   += pm_slowclock.o
+obj-$(CONFIG_CPU_IDLE)  += cpuidle.o
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784050b2..a57af3e99c7c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -131,6 +131,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
 /* --------------------------------------------------------------------
+ *  USB Host HS (EHCI)
+ *  Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+static struct resource usbh_ehci_resources[] = {
+        [0] = {
+                .start  = AT91SAM9G45_EHCI_BASE,
+                .end    = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9G45_ID_UHPHS,
+                .end    = AT91SAM9G45_ID_UHPHS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device at91_usbh_ehci_device = {
+        .name           = "atmel-ehci",
+        .id             = -1,
+        .dev            = {
+                                .dma_mask               = &ehci_dmamask,
+                                .coherent_dma_mask      = DMA_BIT_MASK(32),
+                                .platform_data          = &usbh_ehci_data,
+        },
+        .resource       = usbh_ehci_resources,
+        .num_resources  = ARRAY_SIZE(usbh_ehci_resources),
+};
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+        int i;
+        if (!data)
+                return;
+        /* Enable VBus control for UHP ports */
+        for (i = 0; i < data->ports; i++) {
+                if (data->vbus_pin[i])
+                        at91_set_gpio_output(data->vbus_pin[i], 0);
+        }
+        usbh_ehci_data = *data;
+        at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+        platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+/* --------------------------------------------------------------------
 *  USB HS Device (Gadget)
 * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
new file mode 100644
index 000000000000..295a96609e71
--- /dev/null
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -0,0 +1,158 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include "generic.h"
+static void __init eco920_map_io(void)
+{
+        at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+        /* Setup the LEDs */
+        at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+        /* DBGU on ttyS0. (Rx & Tx only */
+        at91_register_uart(0, 0, 0);
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+static void __init eco920_init_irq(void)
+{
+        at91rm9200_init_interrupts(NULL);
+}
+static struct at91_eth_data __initdata eco920_eth_data = {
+        .phy_irq_pin    = AT91_PIN_PC2,
+        .is_rmii        = 1,
+};
+static struct at91_usbh_data __initdata eco920_usbh_data = {
+        .ports          = 1,
+};
+static struct at91_udc_data __initdata eco920_udc_data = {
+        .vbus_pin       = AT91_PIN_PB12,
+        .pullup_pin     = AT91_PIN_PB13,
+};
+static struct at91_mmc_data __initdata eco920_mmc_data = {
+        .slot_b         = 0,
+        .wire4          = 0,
+};
+static struct physmap_flash_data eco920_flash_data = {
+        .width  = 2,
+};
+static struct resource eco920_flash_resource = {
+        .start          = 0x11000000,
+        .end            = 0x11ffffff,
+        .flags          = IORESOURCE_MEM,
+};
+static struct platform_device eco920_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &eco920_flash_data,
+        },
+        .resource       = &eco920_flash_resource,
+        .num_resources  = 1,
+};
+static struct resource at91_beeper_resources[] = {
+        [0] = {
+                .start          = AT91RM9200_BASE_TC3,
+                .end            = AT91RM9200_BASE_TC3 + 0x39,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+static struct platform_device at91_beeper = {
+        .name           = "at91_beeper",
+        .id             = 0,
+        .resource       = at91_beeper_resources,
+        .num_resources  = ARRAY_SIZE(at91_beeper_resources),
+};
+static struct spi_board_info eco920_spi_devices[] = {
+        {       /* CAN controller */
+                .modalias       = "tlv5638",
+                .chip_select    = 3,
+                .max_speed_hz   = 20 * 1000 * 1000,
+                .mode           = SPI_CPHA,
+        },
+};
+static void __init eco920_board_init(void)
+{
+        at91_add_device_serial();
+        at91_add_device_eth(&eco920_eth_data);
+        at91_add_device_usbh(&eco920_usbh_data);
+        at91_add_device_udc(&eco920_udc_data);
+        at91_add_device_mmc(0, &eco920_mmc_data);
+        platform_device_register(&eco920_flash);
+        at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
+                                | AT91_SMC_RWSETUP_(1)
+                                | AT91_SMC_DBW_8
+                                | AT91_SMC_WSEN
+                                | AT91_SMC_NWS_(15));
+        at91_set_A_periph(AT91_PIN_PC6, 1);
+        at91_set_gpio_input(AT91_PIN_PA23, 0);
+        at91_set_deglitch(AT91_PIN_PA23, 1);
+/* Initialization of the Static Memory Controller for Chip Select 3 */
+        at91_sys_write(AT91_SMC_CSR(3),
+                AT91_SMC_DBW_16  |      /* 16 bit */
+                AT91_SMC_WSEN    |
+                AT91_SMC_NWS_(5) |      /* wait states */
+                AT91_SMC_TDF_(1)        /* float time */
+        );
+        at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
+        at91_set_B_periph(AT91_PIN_PB6, 0);
+        platform_device_register(&at91_beeper);
+        at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+}
+MACHINE_START(ECO920, "eco920")
+        /* Maintainer: Sascha Hauer */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91rm9200_timer,
+        .map_io         = eco920_map_io,
+        .init_irq       = eco920_init_irq,
+        .init_machine   = eco920_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843f323d..1cf4d8681078 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -366,6 +366,7 @@ static void __init ek_board_init(void)
        at91_add_device_serial();
        /* USB HS Host */
        at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+        at91_add_device_usbh_ehci(&ek_usbh_hs_data);
        /* USB HS Device */
        at91_add_device_usba(&ek_usba_udc_data);
        /* SPI */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
new file mode 100644
index 000000000000..1cfeac1483d6
--- /dev/null
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -0,0 +1,94 @@
+/*
+ * based on arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle support for AT91 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <linux/io.h>
+#include "pm.h"
+#define AT91_MAX_STATES 2
+static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
+static struct cpuidle_driver at91_idle_driver = {
+        .name =         "at91_idle",
+        .owner =        THIS_MODULE,
+};
+/* Actual code that puts the SoC in different idle states */
+static int at91_enter_idle(struct cpuidle_device *dev,
+                               struct cpuidle_state *state)
+{
+        struct timeval before, after;
+        int idle_time;
+        u32 saved_lpr;
+        local_irq_disable();
+        do_gettimeofday(&before);
+        if (state == &dev->states[0])
+                /* Wait for interrupt state */
+                cpu_do_idle();
+        else if (state == &dev->states[1]) {
+                asm("b 1f; .align 5; 1:");
+                asm("mcr p15, 0, r0, c7, c10, 4");      /* drain write buffer */
+                saved_lpr = sdram_selfrefresh_enable();
+                cpu_do_idle();
+                sdram_selfrefresh_disable(saved_lpr);
+        }
+        do_gettimeofday(&after);
+        local_irq_enable();
+        idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+                        (after.tv_usec - before.tv_usec);
+        return idle_time;
+}
+/* Initialize CPU idle by registering the idle states */
+static int at91_init_cpuidle(void)
+{
+        struct cpuidle_device *device;
+        cpuidle_register_driver(&at91_idle_driver);
+        device = &per_cpu(at91_cpuidle_device, smp_processor_id());
+        device->state_count = AT91_MAX_STATES;
+        /* Wait for interrupt state */
+        device->states[0].enter = at91_enter_idle;
+        device->states[0].exit_latency = 1;
+        device->states[0].target_residency = 10000;
+        device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+        strcpy(device->states[0].name, "WFI");
+        strcpy(device->states[0].desc, "Wait for interrupt");
+        /* Wait for interrupt and RAM self refresh state */
+        device->states[1].enter = at91_enter_idle;
+        device->states[1].exit_latency = 10;
+        device->states[1].target_residency = 10000;
+        device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+        strcpy(device->states[1].name, "RAM_SR");
+        strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+        if (cpuidle_register_device(device)) {
+                printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
+                return -EIO;
+        }
+        return 0;
+}
+device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2f4fcedc02ba..2295d80dd893 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,7 @@ struct at91_usbh_data {
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 /* NAND / SmartMedia */
 struct atmel_nand_data {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724d490d..615668986480 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
 #include <mach/cpu.h>
 #include "generic.h"
+#include "pm.h"
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable()      at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable()     do {} while (0)
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-static u32 saved_lpr;
-static inline void sdram_selfrefresh_enable(void)
-{
-        u32 lpr;
-        saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-        lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-        at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-#define sdram_selfrefresh_disable()     at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-#else
-#include <mach/at91sam9_sdramc.h>
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define AT91_SDRAMC     AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-static u32 saved_lpr;
-static inline void sdram_selfrefresh_enable(void)
-{
-        u32 lpr;
-        saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-        lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-        at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-#define sdram_selfrefresh_disable()     at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-#endif
 /*
 * Show the reason for the previous system reset.
@@ -260,6 +205,7 @@ extern u32 at91_slow_clock_sz;
 static int at91_pm_enter(suspend_state_t state)
 {
+        u32 saved_lpr;
        at91_gpio_suspend();
        at91_irq_suspend();
@@ -315,9 +261,9 @@ static int at91_pm_enter(suspend_state_t state)
                         */
                        asm("b 1f; .align 5; 1:");
                        asm("mcr p15, 0, r0, c7, c10, 4");      /* drain write buffer */
-                        sdram_selfrefresh_enable();
+                        saved_lpr = sdram_selfrefresh_enable();
                        asm("mcr p15, 0, r0, c7, c0, 4");       /* wait for interrupt */
-                        sdram_selfrefresh_disable();
+                        sdram_selfrefresh_disable(saved_lpr);
                        break;
                case PM_SUSPEND_ON:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 000000000000..08322c44df1a
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,67 @@
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+static inline u32 sdram_selfrefresh_enable(void)
+{
+        u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+        at91_sys_write(AT91_SDRAMC_LPR, 0);
+        at91_sys_write(AT91_SDRAMC_SRR, 1);
+        return saved_lpr;
+}
+#define sdram_selfrefresh_disable(saved_lpr)    at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+static inline u32 sdram_selfrefresh_enable(void)
+{
+        u32 saved_lpr, lpr;
+        saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+        lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+        at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+        return saved_lpr;
+}
+#define sdram_selfrefresh_disable(saved_lpr)    at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#else
+#include <mach/at91sam9_sdramc.h>
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC     AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+static inline u32 sdram_selfrefresh_enable(void)
+{
+        u32 saved_lpr, lpr;
+        saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+        lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+        at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+        return saved_lpr;
+}
+#define sdram_selfrefresh_disable(saved_lpr)    at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff90357..dae5e9b166ea 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
 #define IO_SPACE_LIMIT 0xffffffff
-#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+ * drivers out there that might just work if we fake them...
-/* happen in readw/writew etc. */
+ */
+#define __io(a)         __typesafe_io(a)
-#define readb(c)        __raw_readb(c)
+#define __mem_pci(a)    (a)
-#define readw(c)        __raw_readw(c)
-#define readl(c)        __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readsb(p, d, l)   __raw_readsb(p, d, l)
-#define readsw(p, d, l)   __raw_readsw(p, d, l)
-#define readsl(p, d, l)   __raw_readsl(p, d, l)
-#define writeb(v, c)     __raw_writeb(v, c)
-#define writew(v, c)     __raw_writew(v, c)
-#define writel(v, c)     __raw_writel(v, c)
-#define writesb(p, d, l)  __raw_writesb(p, d, l)
-#define writesw(p, d, l)  __raw_writesw(p, d, l)
-#define writesl(p, d, l)  __raw_writesl(p, d, l)
-#define memset_io(c, v, l)    _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
 #endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b4357c388d2e..1f0d66561bbe 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -728,6 +729,82 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
        platform_device_register(&ep93xx_fb_device);
 }
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+        {
+                .start  = EP93XX_KEY_MATRIX_PHYS_BASE,
+                .end    = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_EP93XX_KEY,
+                .end    = IRQ_EP93XX_KEY,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device ep93xx_keypad_device = {
+        .name                   = "ep93xx-keypad",
+        .id                     = -1,
+        .num_resources          = ARRAY_SIZE(ep93xx_keypad_resource),
+        .resource               = ep93xx_keypad_resource,
+};
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+        ep93xx_keypad_device.dev.platform_data = data;
+        platform_device_register(&ep93xx_keypad_device);
+}
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+        int err;
+        int i;
+        for (i = 0; i < 8; i++) {
+                err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+                if (err)
+                        goto fail_gpio_c;
+                err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+                if (err)
+                        goto fail_gpio_d;
+        }
+        /* Enable the keypad controller; GPIO ports C and D used for keypad */
+        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+                                 EP93XX_SYSCON_DEVCFG_GONK);
+        return 0;
+fail_gpio_d:
+        gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+        for ( ; i >= 0; --i) {
+                gpio_free(EP93XX_GPIO_LINE_C(i));
+                gpio_free(EP93XX_GPIO_LINE_D(i));
+        }
+        return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+        int i;
+        for (i = 0; i < 8; i++) {
+                gpio_free(EP93XX_GPIO_LINE_C(i));
+                gpio_free(EP93XX_GPIO_LINE_D(i));
+        }
+        /* Disable the keypad controller; GPIO ports C and D used for GPIO */
+        ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+                               EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
 extern void ep93xx_gpio_init(void);
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a89801c..50cb991eadeb 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d13148..3a5961d3f3b1 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937eda29c..d55194a4c093 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
 #define EP93XX_UART3_PHYS_BASE          EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE               EP93XX_APB_IOMEM(0x000e0000)
+#define EP93XX_KEY_MATRIX_PHYS_BASE     EP93XX_APB_PHYS(0x000f0000)
 #define EP93XX_KEY_MATRIX_BASE          EP93XX_APB_IOMEM(0x000f0000)
 #define EP93XX_ADC_BASE                 EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7cb72d5..5a3ce024b593 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
 /*
 * arch/arm/mach-ep93xx/include/mach/hardware.h
 */
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c53d63..594b77f21054 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
 /*
 * arch/arm/mach-ep93xx/include/mach/io.h
 */
 #ifndef __ASM_MACH_IO_H
 #define __ASM_MACH_IO_H
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 469fd968d517..c6dc14dbca18 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@ struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
 struct ep93xx_eth_data
 {
@@ -39,6 +40,9 @@ void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b288a1..25b1da9a5035 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
                (dma_addr_t)page_to_phys(page);                         \
        })
+#define __arch_dma_to_page(dev, addr)   phys_to_page(addr)
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308685a4..ffa19aae6e05 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@ extern struct bus_type platform_bus_type;
                __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
           __dma; })
+#define __arch_dma_to_page(dev, x)      \
+        ({ dma_addr_t __dma = x;                                \
+           if (!is_lbus_device(dev))                            \
+                __dma += PHYS_OFFSET - KS8695_PCIMEM_PA;        \
+           phys_to_page(__dma);                                 \
+        })
 #endif
 #endif
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49c40f0..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@ menu "Nomadik boards"
 config MACH_NOMADIK_8815NHK
        bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
        select NOMADIK_8815
+        select HAS_MTU
 endmenu
 config NOMADIK_8815
        bool
 config I2C_BITBANG_8815NHK
        tristate "Driver for bit-bang busses found on the 8815 NHK"
        depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 412040982a40..36f67fb207d2 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 # Object file lists.
-obj-y                   += clock.o timer.o gpio.o
+obj-y                   += clock.o gpio.o
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537d5afb..116394484e71 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <plat/mtu.h>
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 #include "clock.h"
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK        0x00007fff
+#define SRC_CR_INIT_VAL         0x2aaa8000
 /* These adresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
        {
@@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = {
        /* will add more devices */
 };
+static void __init nomadik_timer_init(void)
+{
+        u32 src_cr;
+        /* Configure timer sources in "system reset controller" ctrl reg */
+        src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+        src_cr &= SRC_CR_INIT_MASK;
+        src_cr |= SRC_CR_INIT_VAL;
+        writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+        /* Save global pointer to mtu, used by platform timer code */
+        mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+        nmdk_timer_init();
+}
+static struct sys_timer nomadik_timer = {
+        .init   = nomadik_timer_init,
+};
 static void __init nhk8815_platform_init(void)
 {
        int i;
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468cf63da..b7897edf1f35 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
 extern void cpu8815_map_io(void);
 extern void cpu8815_platform_init(void);
 extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
 #endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c027c1e..fab46fe9a71f 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MMC)                 += mmc.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_I2C_STU300)          += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f888b27..c73ed06b6065 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
 */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
 #include <mach/irqs.h>
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING           0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING           0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING           0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING           0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING     0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING           0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING           0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING           0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING           0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING         0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING    0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING      0xAC
+static struct regulator_consumer_supply supply_ldo_c[] = {
+        {
+                .dev_name = "ab3100-codec",
+                .supply = "vaudio", /* Powers the codec */
+        },
+};
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+        {
+                .dev = NULL,
+                .supply = "vana15", /* Powers the SoC (CPU etc) */
+        },
+};
+static struct regulator_consumer_supply supply_ldo_g[] = {
+        {
+                .dev_name = "mmci",
+                .supply = "vmmc", /* Powers MMC/SD card */
+        },
+};
+static struct regulator_consumer_supply supply_ldo_h[] = {
+        {
+                .dev_name = "xgam_pdi",
+                .supply = "vdisp", /* Powers camera, display etc */
+        },
+};
+static struct regulator_consumer_supply supply_ldo_k[] = {
+        {
+                .dev_name = "irda",
+                .supply = "vir", /* Power IrDA */
+        },
+};
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+        {
+                .dev = NULL,
+                .supply = "vext", /* External power */
+        },
+};
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+static struct ab3100_platform_data ab3100_plf_data = {
+        .reg_constraints = {
+                /* LDO A routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vrad",
+                                .min_uV = LDO_A_VOLTAGE,
+                                .max_uV = LDO_A_VOLTAGE,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+                /* LDO C routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = LDO_C_VOLTAGE,
+                                .max_uV = LDO_C_VOLTAGE,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+                        .consumer_supplies = supply_ldo_c,
+                },
+                /* LDO D routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = LDO_D_VOLTAGE,
+                                .max_uV = LDO_D_VOLTAGE,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+                                /*
+                                 * Actually this is boot_on but we need
+                                 * to reference count it externally to
+                                 * be able to shut down the system.
+                                 */
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+                        .consumer_supplies = supply_ldo_d,
+                },
+                /* LDO E routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vio",
+                                .min_uV = 1800000,
+                                .max_uV = 1800000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+                /* LDO F routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vana25",
+                                .min_uV = 2500000,
+                                .max_uV = 2500000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+                /* LDO G routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = 1500000,
+                                .max_uV = 2850000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+                        .consumer_supplies = supply_ldo_g,
+                },
+                /* LDO H routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = 1200000,
+                                .max_uV = 2750000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+                        .consumer_supplies = supply_ldo_h,
+                },
+                /* LDO K routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = 1800000,
+                                .max_uV = 2750000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+                        .consumer_supplies = supply_ldo_k,
+                },
+                /* External regulator interface. No fixed voltage specified.
+                 * If we knew the voltage of the external regulator and it
+                 * was connected on the board, we could add the (fixed)
+                 * voltage for it here.
+                 */
+                {
+                        .constraints = {
+                                .min_uV = 0,
+                                .max_uV = 0,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+                        .consumer_supplies = supply_ldo_ext,
+                },
+                /* Buck converter routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vcore",
+                                .min_uV = 1200000,
+                                .max_uV = 1800000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+        },
+        .reg_initvals = {
+                LDO_A_SETTING,
+                LDO_C_SETTING,
+                LDO_E_SETTING,
+                LDO_E_SLEEP_SETTING,
+                LDO_F_SETTING,
+                LDO_G_SETTING,
+                LDO_H_SETTING,
+                LDO_K_SETTING,
+                LDO_EXT_SETTING,
+                BUCK_SETTING,
+                BUCK_SLEEP_SETTING,
+                LDO_D_SETTING,
+        },
+};
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
        {
                .type = "ab3100",
                .addr = 0x48,
                .irq = IRQ_U300_IRQ0_EXT,
+                .platform_data = &ab3100_plf_data,
        },
 };
@@ -38,6 +282,11 @@ void __init u300_i2c_register_board_devices(void)
 {
        i2c_register_board_info(0, bus0_i2c_board_info,
                                ARRAY_SIZE(bus0_i2c_board_info));
+        /*
+         * This makes the core shut down all unused regulators
+         * after all the initcalls have completed.
+         */
+        regulator_has_full_constraints();
        i2c_register_board_info(1, bus1_i2c_board_info,
                                ARRAY_SIZE(bus1_i2c_board_info));
 }
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016786bb..109f5a6e71c7 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@ static unsigned int mmc_status(struct device *dev)
        return mmci_card->mmc_inserted;
 }
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
-        int v;
-        /*
-         * MMC Spec:
-         * bit 7:       1.70 - 1.95V
-         * bit 8 - 14:  2.0 - 2.6V
-         * bit 15 - 23: 2.7 - 3.6V
-         *
-         * ab3100 voltages:
-         * 000 - 2.85V
-         * 001 - 2.75V
-         * 010 - 1.8V
-         * 011 - 1.5V
-         */
-        switch (voltage) {
-        case 8:
-                v = 3;
-                break;
-        case 9:
-        case 10:
-        case 11:
-        case 12:
-        case 13:
-        case 14:
-        case 15:
-                v = 1;
-                break;
-        case 16:
-                v = 1;
-                break;
-        case 17:
-        case 18:
-        case 19:
-        case 20:
-        case 21:
-        case 22:
-        case 23:
-        case 24:
-                v = 0;
-                break;
-        default:
-                v = 0;
-                break;
-        }
-        /* PL180 voltage register bits */
-        return v << 2;
-}
 static int mmci_callback(void *data)
 {
        struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@ int __devinit mmc_init(struct amba_device *adev)
        if (!mmci_card)
                return -ENOMEM;
+        /*
+         * Do not set ocr_mask or voltage translation function,
+         * we have a regulator we can control instead.
+         */
        /* Nominally 2.85V on our platform */
-        mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
-        mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
        mmci_card->mmc0_plat_data.status = mmc_status;
        mmci_card->mmc0_plat_data.gpio_wp = -1;
        mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000000..9c53f01c62eb
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+        sigset_t old, all;
+        sigfillset(&all);
+        if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+                /* Disable LDO D to shut down the system */
+                if (main_power_15)
+                        regulator_disable(main_power_15);
+                else
+                        pr_err("regulator not available to shut down system\n");
+                (void) sigprocmask(SIG_SETMASK, &old, NULL);
+        }
+        return;
+}
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+        int err;
+        u32 val;
+        pr_info("U300: setting up board power\n");
+        main_power_15 = regulator_get(NULL, "vana15");
+        if (IS_ERR(main_power_15)) {
+                pr_err("could not get vana15");
+                return PTR_ERR(main_power_15);
+        }
+        err = regulator_enable(main_power_15);
+        if (err) {
+                pr_err("could not enable vana15\n");
+                return err;
+        }
+        /*
+         * On U300 a special system controller register pulls up the DC
+         * until the vana15 (LDO D) regulator comes up. At this point, all
+         * regulators are set and we do not need power control via
+         * DC ON anymore. This function will likely be moved whenever
+         * the rest of the U300 power management is implemented.
+         */
+        pr_info("U300: disable system controller pull-up\n");
+        val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+        val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+        writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+        /* Register globally exported PM poweroff hook */
+        pm_power_off = u300_pm_poweroff;
+        return 0;
+}
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 000000000000..03625d744857
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+        depends on ARCH_U8500
+comment "ST-Ericsson Multicore Mobile Platforms"
+config MACH_U8500_MOP
+        bool "U8500 Early Development platform"
+        default y
+        select ARM_GIC
+        select HAS_MTU
+        help
+          Include support for mop500 development platform
+          based on U8500 architecture. The platform is based
+          on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 000000000000..95e6e24c0042
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+obj-y                           := clock.o
+obj-$(CONFIG_ARCH_U8500)        += cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP)    += board-mop500.o
+obj-$(CONFIG_SMP)               += platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 000000000000..c7e75acfe6c9
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 000000000000..aa5afbcc90f9
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#define __MEM_4K_RESOURCE(x) \
+        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+        .dev = { .init_name = "uart0" },
+        __MEM_4K_RESOURCE(U8500_UART0_BASE),
+        .irq = {IRQ_UART0, NO_IRQ},
+};
+static struct amba_device uart1_device = {
+        .dev = { .init_name = "uart1" },
+        __MEM_4K_RESOURCE(U8500_UART1_BASE),
+        .irq = {IRQ_UART1, NO_IRQ},
+};
+static struct amba_device uart2_device = {
+        .dev = { .init_name = "uart2" },
+        __MEM_4K_RESOURCE(U8500_UART2_BASE),
+        .irq = {IRQ_UART2, NO_IRQ},
+};
+static void ab4500_spi_cs_control(u32 command)
+{
+        /* set the FRM signal, which is CS  - TODO */
+}
+struct pl022_config_chip ab4500_chip_info = {
+        .lbm = LOOPBACK_DISABLED,
+        .com_mode = INTERRUPT_TRANSFER,
+        .iface = SSP_INTERFACE_MOTOROLA_SPI,
+        /* we can act as master only */
+        .hierarchy = SSP_MASTER,
+        .slave_tx_disable = 0,
+        .endian_rx = SSP_RX_MSB,
+        .endian_tx = SSP_TX_MSB,
+        .data_size = SSP_DATA_BITS_24,
+        .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+        .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+        .clk_phase = SSP_CLK_SECOND_EDGE,
+        .clk_pol = SSP_CLK_POL_IDLE_HIGH,
+        .cs_control = ab4500_spi_cs_control,
+};
+static struct spi_board_info u8500_spi_devices[] = {
+        {
+                .modalias = "ab4500",
+                .controller_data = &ab4500_chip_info,
+                .max_speed_hz = 12000000,
+                .bus_num = 0,
+                .chip_select = 0,
+                .mode = SPI_MODE_0,
+                .irq = IRQ_AB4500,
+        },
+};
+static struct pl022_ssp_controller ssp0_platform_data = {
+        .bus_id = 0,
+        /* pl022 not yet supports dma */
+        .enable_dma = 0,
+        /* on this platform, gpio 31,142,144,214 &
+         * 224 are connected as chip selects
+         */
+        .num_chipselect = 5,
+};
+static struct amba_device pl022_device = {
+        .dev = {
+                .coherent_dma_mask = ~0,
+                .init_name = "pl022",
+                .platform_data = &ssp0_platform_data,
+        },
+        .res = {
+                .start = U8500_SSP0_BASE,
+                .end   = U8500_SSP0_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        .irq = {IRQ_SSP0, NO_IRQ },
+        /* ST-Ericsson modified id */
+        .periphid = SSP_PER_ID,
+};
+static struct amba_device *amba_devs[] __initdata = {
+        &uart0_device,
+        &uart1_device,
+        &uart2_device,
+        &pl022_device,
+};
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+        /* Setup the local timer base */
+        twd_base = __io_address(U8500_TWD_BASE);
+#endif
+        /* Setup the MTU base */
+        mtu_base = __io_address(U8500_MTU0_BASE);
+        nmdk_timer_init();
+}
+static struct sys_timer u8500_timer = {
+        .init   = u8500_timer_init,
+};
+static void __init u8500_init_machine(void)
+{
+        int i;
+        /* Register the active AMBA devices on this board */
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+        spi_register_board_info(u8500_spi_devices,
+                        ARRAY_SIZE(u8500_spi_devices));
+        u8500_init_devices();
+}
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+        /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+        .phys_io        = U8500_UART2_BASE,
+        .io_pg_offst    = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x100,
+        .map_io         = u8500_map_io,
+        .init_irq       = u8500_init_irq,
+        /* we re-use nomadik timer here */
+        .timer          = &u8500_timer,
+        .init_machine   = u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 000000000000..20b6ebb6783a
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *      heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <asm/clkdev.h>
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+        unsigned long           rate;
+};
+int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        /*TODO*/
+        return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        clk->rate = rate;
+        return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+/* ssp clock */
+static struct clk ssp_clk = {
+        .rate = 48000000,
+};
+/* fixed clock */
+static struct clk f38_clk = {
+        .rate = 38400000,
+};
+static struct clk_lookup lookups[] = {
+        {
+                /* UART0 */
+                .dev_id         = "uart0",
+                .clk            = &f38_clk,
+        }, {    /* UART1 */
+                .dev_id         = "uart1",
+                .clk            = &f38_clk,
+        }, {    /* UART2 */
+                .dev_id         = "uart2",
+                .clk            = &f38_clk,
+        }, {    /* SSP */
+                .dev_id         = "pl022",
+                .clk            = &ssp_clk,
+        }
+};
+static int __init clk_init(void)
+{
+        int i;
+        /* register the clock lookups */
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+        return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 000000000000..5f05e5850f71
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+        /* yet to be added, add i2c0, gpio.. */
+};
+#define __IO_DEV_DESC(x, sz)    {               \
+        .virtual        = IO_ADDRESS(x),        \
+        .pfn            = __phys_to_pfn(x),     \
+        .length         = sz,                   \
+        .type           = MT_DEVICE,            \
+}
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+        __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+void __init u8500_map_io(void)
+{
+        iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+void __init u8500_init_irq(void)
+{
+        gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+        gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+        /* Register the platform devices */
+        platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+        return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 000000000000..a6be2cdf2b2f
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2009 ST-Ericsson
+ *      This file is based  ARM Realview platform
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+        __INIT
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+        mrc     p15, 0, r0, c0, c0, 5
+        and     r0, r0, #15
+        adr     r4, 1f
+        ldmia   r4, {r5, r6}
+        sub     r4, r4, r5
+        add     r6, r6, r4
+        dsb
+pen:    ldr     r7, [r6]
+        cmp     r7, r0
+        bne     pen
+        /*
+         * we've been released from the holding pen: secondary_stack
+         * should now contain the SVC stack for this core
+         */
+        b       secondary_startup
+1:      .long   .
+        .long   pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8f21b6a95dce
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+        .macro  addruart,rx
+        mrc     p15, 0, \rx, c1, c0
+        tst     \rx, #1                 @MMU enabled?
+        moveq   \rx, #0x80000000        @MMU off, Physical address
+        movne   \rx, #0xF0000000        @MMU on, Virtual address
+        orr     \rx, \rx, #0x7000
+        .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 000000000000..eece3301fef7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ *      -just satisfied checkpatch script.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+                .macro  disable_fiq
+                .endm
+                .macro  get_irqnr_preamble, base, tmp
+                ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+                .endm
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+                /*
+                 * The interrupt numbering scheme is defined in the
+                 * interrupt controller spec.  To wit:
+                 *
+                 * Interrupts 0-15 are IPI
+                 * 16-28 are reserved
+                 * 29-31 are local.  We allow 30 to be used for the watchdog.
+                 * 32-1020 are global
+                 * 1021-1022 are reserved
+                 * 1023 is "spurious" (no interrupt)
+                 *
+                 * For now, we ignore all local interrupts so only return an
+                 * interrupt if it's between 30 and 1020. The test_for_ipi
+                 * routine below will pick up on IPIs.
+                 *
+                 * A simple read from the controller will tell us the number
+                 * of the highest priority enabled interrupt. We then just
+                 * need to check whether it is in the valid range for an
+                 * IRQ (30-1020 inclusive).
+                 */
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                /* bits 12-10 = src CPU, 9-0 = int # */
+                ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+                ldr     \tmp, =1021
+                bic     \irqnr, \irqstat, #0x1c00
+                cmp     \irqnr, #29
+                cmpcc   \irqnr, \irqnr
+                cmpne   \irqnr, \tmp
+                cmpcs   \irqnr, \irqnr
+                .endm
+                /* We assume that irqstat (the raw value of the IRQ
+                 * acknowledge register) is preserved from the macro above.
+                 * If there is an IPI, we immediately signal end of
+                 * interrupt on the controller, since this requires the
+                 * original irqstat value which we won't easily be able
+                 * to recreate later.
+                 */
+                .macro test_for_ipi, irqnr, irqstat, base, tmp
+                bic     \irqnr, \irqstat, #0x1c00
+                cmp     \irqnr, #16
+                strcc   \irqstat, [\base, #GIC_CPU_EOI]
+                cmpcs   \irqnr, \irqnr
+                .endm
+                /* As above, this assumes that irqstat and base
+                 * are preserved..
+                 */
+                .macro test_for_ltirq, irqnr, irqstat, base, tmp
+                bic     \irqnr, \irqstat, #0x1c00
+                mov     \tmp, #0
+                cmp     \irqnr, #29
+                moveq   \tmp, #1
+                streq   \irqstat, [\base, #GIC_CPU_EOI]
+                cmp     \tmp, #0
+                .endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 000000000000..6da650202dc7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL        0xf0000000
+#define U8500_IO_PHYSICAL       0xa0000000
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+        (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+/* typesafe io address */
+#define __io_address(n)         __io(IO_ADDRESS(n))
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE         0x80000000
+#define U8500_PER2_BASE         0x80110000
+#define U8500_PER1_BASE         0x80120000
+#define U8500_PER4_BASE         0x80150000
+#define U8500_PER6_BASE         0xa03c0000
+#define U8500_PER5_BASE         0xa03e0000
+#define U8500_PER7_BASE         0xa03d0000
+#define U8500_SVA_BASE          0xa0100000
+#define U8500_SIA_BASE          0xa0200000
+#define U8500_SGA_BASE          0xa0300000
+#define U8500_MCDE_BASE         0xa0350000
+#define U8500_DMA_BASE          0xa0362000
+#define U8500_SCU_BASE          0xa0410000
+#define U8500_GIC_CPU_BASE      0xa0410100
+#define U8500_TWD_BASE          0xa0410600
+#define U8500_GIC_DIST_BASE     0xa0411000
+#define U8500_L2CC_BASE         0xa0412000
+#define U8500_TWD_SIZE          0x100
+/* per7 base addressess */
+#define U8500_CR_BASE           (U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE         (U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE         (U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE        (U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE      (U8500_PER7_BASE + 0xf000)
+/* per6 base addressess */
+#define U8500_RNG_BASE          (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE          (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE         (U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE      (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE      (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE      (U8500_PER7_BASE + 0xf000)
+/* per5 base addressess */
+#define U8500_USBOTG_BASE       (U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE        (U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE      (U8500_PER7_BASE + 0x1f000)
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE   (U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE   (U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE         (U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE         (U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE          (U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE          (U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE          (U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE        (U8500_PER4_BASE + 0x7000)
+/* per3 base addressess */
+#define U8500_FSMC_BASE         (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE         (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE         (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE         (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE         (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE          (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE        (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE         (U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE        (U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE      (U8500_PER7_BASE + 0xf000)
+/* per2 base addressess */
+#define U8500_I2C3_BASE         (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE         (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE         (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE          (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE         (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE         (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE         (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE         (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE         (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE         (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE         (U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE        (U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE      (U8500_PER2_BASE + 0xf000)
+/* per1 base addresses */
+#define U8500_UART0_BASE        (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE        (U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE         (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE         (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE         (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE         (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE         (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE         (U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE        (U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE        (U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE      (U8500_PER2_BASE + 0xf000)
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID              0x01080022
+#endif                          /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 000000000000..1cf3f44ce5b2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+#define IO_SPACE_LIMIT 0xffffffff
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 000000000000..394b5dd2200f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *  Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+#include <mach/hardware.h>
+#define IRQ_LOCALTIMER                  29
+#define IRQ_LOCALWDOG                   30
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START                  32
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0                (IRQ_SHPI_START + 4)
+#define IRQ_SPI2                (IRQ_SHPI_START + 6)
+#define IRQ_SPI0                (IRQ_SHPI_START + 8)
+#define IRQ_UART0               (IRQ_SHPI_START + 11)
+#define IRQ_I2C3                (IRQ_SHPI_START + 12)
+#define IRQ_SSP0                (IRQ_SHPI_START + 14)
+#define IRQ_MTU1                (IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT             (IRQ_SHPI_START + 18)
+#define IRQ_UART1               (IRQ_SHPI_START + 19)
+#define IRQ_I2C0                (IRQ_SHPI_START + 21)
+#define IRQ_I2C1                (IRQ_SHPI_START + 22)
+#define IRQ_USBOTG              (IRQ_SHPI_START + 23)
+#define IRQ_DMA                 (IRQ_SHPI_START + 25)
+#define IRQ_UART2               (IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP          (IRQ_SHPI_START + 29)
+#define IRQ_MSP0                (IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN     (IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN     (IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN     (IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN     (IRQ_SHPI_START + 35)
+#define IRQ_AB4500              (IRQ_SHPI_START + 40)
+#define IRQ_DISP                (IRQ_SHPI_START + 48)
+#define IRQ_SiPI3               (IRQ_SHPI_START + 49)
+#define IRQ_SSP1                (IRQ_SHPI_START + 52)
+#define IRQ_I2C2                (IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0              (IRQ_SHPI_START + 60)
+#define IRQ_MSP1                (IRQ_SHPI_START + 62)
+#define IRQ_SPI1                (IRQ_SHPI_START + 96)
+#define IRQ_MSP2                (IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4              (IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0              (IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1              (IRQ_SHPI_START + 105)
+#define IRQ_HSITD0              (IRQ_SHPI_START + 106)
+#define IRQ_HSITD1              (IRQ_SHPI_START + 107)
+#define IRQ_GPIO0               (IRQ_SHPI_START + 119)
+#define IRQ_GPIO1               (IRQ_SHPI_START + 120)
+#define IRQ_GPIO2               (IRQ_SHPI_START + 121)
+#define IRQ_GPIO3               (IRQ_SHPI_START + 122)
+#define IRQ_GPIO4               (IRQ_SHPI_START + 123)
+#define IRQ_GPIO5               (IRQ_SHPI_START + 124)
+#define IRQ_GPIO6               (IRQ_SHPI_START + 125)
+#define IRQ_GPIO7               (IRQ_SHPI_START + 126)
+#define IRQ_GPIO8               (IRQ_SHPI_START + 127)
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS                 161
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 000000000000..510571a59e25
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x00000000)
+#define BUS_OFFSET      UL(0x00000000)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 000000000000..cf0ce1687f24
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+#include <asm/mach/time.h>
+#include <linux/init.h>
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 000000000000..b59f7bc9725d
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+#include <asm/hardware/gic.h>
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+#define hard_smp_processor_id()                         \
+        ({                                              \
+                unsigned int cpunum;                    \
+                __asm__("mrc p15, 0, %0, c0, c0, 5"     \
+                        : "=r" (cpunum));               \
+                cpunum &= 0x0F;                         \
+        })
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+        gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 000000000000..c0cd8006f1a2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+static inline void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching
+         * and wait for interrupt tricks
+         */
+        cpu_do_idle();
+}
+static inline void arch_reset(char mode, const char *cmd)
+{
+        /* yet to be implemented - TODO */
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 000000000000..d0942c174018
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+#define CLOCK_TICK_RATE         110000000
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 000000000000..8552eb188b50
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#define U8500_UART_DR           0x80007000
+#define U8500_UART_LCRH         0x8000702c
+#define U8500_UART_CR           0x80007030
+#define U8500_UART_FR           0x80007018
+static void putc(const char c)
+{
+        /* Do nothing if the UART is not enabled. */
+        if (!(readb(U8500_UART_CR) & 0x1))
+                return;
+        if (c == '\n')
+                putc('\r');
+        while (readb(U8500_UART_FR) & (1 << 5))
+                barrier();
+        writeb(c, U8500_UART_DR);
+}
+static void flush(void)
+{
+        if (!(readb(U8500_UART_CR) & 0x1))
+                return;
+        while (readb(U8500_UART_FR) & (1 << 3))
+                barrier();
+}
+static inline void arch_decomp_setup(void)
+{
+}
+#define arch_decomp_wdog() /* nothing to do here */
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 000000000000..86cdbbce1842
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END     0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 000000000000..2288f6a7c518
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+        evt->irq = IRQ_LOCALTIMER;
+        twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 000000000000..8dfe7ca245d8
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static unsigned int __init get_core_count(void)
+{
+        return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+static DEFINE_SPINLOCK(boot_lock);
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+        trace_hardirqs_off();
+        /*
+         * if any interrupts are already enabled for the primary
+         * core (e.g. timer irq), then they will not have been enabled
+         * for us: do so
+         */
+        gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+        /*
+         * let the primary processor know we're out of the
+         * pen, then head off into the C entry point
+         */
+        pen_release = -1;
+        /*
+         * Synchronise with the boot thread.
+         */
+        spin_lock(&boot_lock);
+        spin_unlock(&boot_lock);
+}
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+        unsigned long timeout;
+        /*
+         * set synchronisation state between this boot processor
+         * and the secondary one
+         */
+        spin_lock(&boot_lock);
+        /*
+         * The secondary processor is waiting to be released from
+         * the holding pen - release it, then wait for it to flag
+         * that it has been released by resetting pen_release.
+         */
+        pen_release = cpu;
+        flush_cache_all();
+        timeout = jiffies + (1 * HZ);
+        while (time_before(jiffies, timeout)) {
+                if (pen_release == -1)
+                        break;
+        }
+        /*
+         * now the secondary core is starting up let it run its
+         * calibrations, then wait for it to finish
+         */
+        spin_unlock(&boot_lock);
+        return pen_release != -1 ? -ENOSYS : 0;
+}
+static void __init wakeup_secondary(void)
+{
+        /* nobody is to be released from the pen yet */
+        pen_release = -1;
+        /*
+         * write the address of secondary startup into the backup ram register
+         * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+         * backup ram register at offset 0x1FF0, which is what boot rom code
+         * is waiting for. This would wake up the secondary core from WFE
+         */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+        __raw_writel(virt_to_phys(u8500_secondary_startup),
+                (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+                U8500_CPU1_JUMPADDR_OFFSET);
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+        __raw_writel(0xA1FEED01,
+                (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+                U8500_CPU1_WAKEMAGIC_OFFSET);
+        /* make sure write buffer is drained */
+        mb();
+}
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+        unsigned int i, ncores = get_core_count();
+        for (i = 0; i < ncores; i++)
+                set_cpu_possible(i, true);
+}
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+        unsigned int ncores = get_core_count();
+        unsigned int cpu = smp_processor_id();
+        int i;
+        /* sanity check */
+        if (ncores == 0) {
+                printk(KERN_ERR
+                       "U8500: strange CM count of 0? Default to 1\n");
+                ncores = 1;
+        }
+        if (ncores > num_possible_cpus())       {
+                printk(KERN_WARNING
+                       "U8500: no. of cores (%d) greater than configured "
+                       "maximum of %d - clipping\n",
+                       ncores, num_possible_cpus());
+                ncores = num_possible_cpus();
+        }
+        smp_store_cpu_info(cpu);
+        /*
+         * are we trying to boot more cores than exist?
+         */
+        if (max_cpus > ncores)
+                max_cpus = ncores;
+        /*
+         * Initialise the present map, which describes the set of CPUs
+         * actually populated at the present time.
+         */
+        for (i = 0; i < max_cpus; i++)
+                set_cpu_present(i, true);
+        if (max_cpus > 1) {
+                /*
+                 * Enable the local timer or broadcast device for the
+                 * boot CPU, but only if we have more than one CPU.
+                 */
+                percpu_timer_setup();
+                scu_enable(__io_address(U8500_SCU_BASE));
+                wakeup_secondary();
+        }
+}
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98de48d2..51f17b753348 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 #include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
 #include <mach/map.h>
 #include "cpu.h"
@@ -196,6 +197,18 @@ static struct platform_device nuc900_device_emc = {
 /* SPI device */
+static struct w90p910_spi_info nuc900_spiflash_data = {
+        .num_cs         = 1,
+        .lsb            = 0,
+        .txneg          = 1,
+        .rxneg          = 0,
+        .divider        = 24,
+        .sleep          = 0,
+        .txnum          = 0,
+        .txbitlen       = 1,
+        .bus_num        = 0,
+};
 static struct resource nuc900_spi_resource[] = {
        [0] = {
                .start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@ static struct platform_device nuc900_device_spi = {
        .id             = -1,
        .num_resources  = ARRAY_SIZE(nuc900_spi_resource),
        .resource       = nuc900_spi_resource,
+        .dev            = {
+                                .platform_data = &nuc900_spiflash_data,
+                        }
 };
 /* spi device, spi flash info */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d814cd7a..7b7d4c36c11c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -774,5 +774,5 @@ config CACHE_XSC3L2
 config ARM_L1_CACHE_SHIFT
        int
-        default 6 if ARCH_OMAP3
+        default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
        default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa8134..42352e75742b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
                                   iomap.o
 obj-$(CONFIG_MMU)               += fault-armv.o flush.o ioremap.o mmap.o \
-                                   pgd.o mmu.o
+                                   pgd.o mmu.o vmregion.o
 ifneq ($(CONFIG_MMU),y)
 obj-y                           += nommu.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d3591f..747f9a9021bb 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -99,18 +99,25 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
        l2x0_base = base;
-        /* disable L2X0 */
+        /*
-        writel(0, l2x0_base + L2X0_CTRL);
+         * Check if l2x0 controller is already enabled.
+         * If you are booting from non-secure mode
+         * accessing the below registers will fault.
+         */
+        if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
-        aux = readl(l2x0_base + L2X0_AUX_CTRL);
+                /* l2x0 controller is disabled */
-        aux &= aux_mask;
-        aux |= aux_val;
-        writel(aux, l2x0_base + L2X0_AUX_CTRL);
-        l2x0_inv_all();
+                aux = readl(l2x0_base + L2X0_AUX_CTRL);
+                aux &= aux_mask;
+                aux |= aux_val;
+                writel(aux, l2x0_base + L2X0_AUX_CTRL);
-        /* enable L2X0 */
+                l2x0_inv_all();
-        writel(1, l2x0_base + L2X0_CTRL);
+                /* enable L2X0 */
+                writel(1, l2x0_base + L2X0_CTRL);
+        }
        outer_cache.inv_range = l2x0_inv_range;
        outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7bddfe5..841f355319bf 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to,
        kfrom = kmap_atomic(from, KM_USER0);
        kto = kmap_atomic(to, KM_USER1);
        copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+        /*
+         * kmap_atomic() doesn't set the page virtual address, and
+         * kunmap_atomic() takes care of cache flushing already.
+         */
+        if (page_address(to) != NULL)
+#endif
+                __cpuc_flush_dcache_page(kto);
        kunmap_atomic(kto, KM_USER1);
        kunmap_atomic(kfrom, KM_USER0);
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b9590a7085ca..26325cb5d368 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,194 +63,152 @@ static u64 get_coherent_dma_mask(struct device *dev)
        return mask;
 }
-#ifdef CONFIG_MMU
 /*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask.  Note that 'size' must be page aligned.
 */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
-static DEFINE_SPINLOCK(consistent_lock);
+{
+        unsigned long order = get_order(size);
+        struct page *page, *p, *e;
+        void *ptr;
+        u64 mask = get_coherent_dma_mask(dev);
-/*
+#ifdef CONFIG_DMA_API_DEBUG
- * VM region handling support.
+        u64 limit = (mask + 1) & ~mask;
- *
+        if (limit && size >= limit) {
- * This should become something generic, handling VM region allocations for
+                dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
- * vmalloc and similar (ioremap, module space, etc).
+                        size, mask);
- *
+                return NULL;
- * I envisage vmalloc()'s supporting vm_struct becoming:
+        }
- *
+#endif
- *  struct vm_struct {
- *    struct vm_region  region;
- *    unsigned long     flags;
- *    struct page       **pages;
- *    unsigned int      nr_pages;
- *    unsigned long     phys_addr;
- *  };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- *  struct vm_region vmalloc_head = {
- *      .vm_list        = LIST_HEAD_INIT(vmalloc_head.vm_list),
- *      .vm_start       = VMALLOC_START,
- *      .vm_end         = VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
-        struct list_head        vm_list;
-        unsigned long           vm_start;
-        unsigned long           vm_end;
-        struct page             *vm_pages;
-        int                     vm_active;
-};
-static struct arm_vm_region consistent_head = {
+        if (!mask)
-        .vm_list        = LIST_HEAD_INIT(consistent_head.vm_list),
+                return NULL;
-        .vm_start       = CONSISTENT_BASE,
-        .vm_end         = CONSISTENT_END,
-};
-static struct arm_vm_region *
+        if (mask < 0xffffffffULL)
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
+                gfp |= GFP_DMA;
-{
-        unsigned long addr = head->vm_start, end = head->vm_end - size;
+        page = alloc_pages(gfp, order);
-        unsigned long flags;
+        if (!page)
-        struct arm_vm_region *c, *new;
+                return NULL;
-        new = kmalloc(sizeof(struct arm_vm_region), gfp);
-        if (!new)
-                goto out;
-        spin_lock_irqsave(&consistent_lock, flags);
-        list_for_each_entry(c, &head->vm_list, vm_list) {
-                if ((addr + size) < addr)
-                        goto nospc;
-                if ((addr + size) <= c->vm_start)
-                        goto found;
-                addr = c->vm_end;
-                if (addr > end)
-                        goto nospc;
-        }
- found:
        /*
-         * Insert this entry _before_ the one we found.
+         * Now split the huge page and free the excess pages
         */
-        list_add_tail(&new->vm_list, &c->vm_list);
+        split_page(page, order);
-        new->vm_start = addr;
+        for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
-        new->vm_end = addr + size;
+                __free_page(p);
-        new->vm_active = 1;
+        /*
-        spin_unlock_irqrestore(&consistent_lock, flags);
+         * Ensure that the allocated pages are zeroed, and that any data
-        return new;
+         * lurking in the kernel direct-mapped region is invalidated.
+         */
- nospc:
+        ptr = page_address(page);
-        spin_unlock_irqrestore(&consistent_lock, flags);
+        memset(ptr, 0, size);
-        kfree(new);
+        dmac_flush_range(ptr, ptr + size);
- out:
+        outer_flush_range(__pa(ptr), __pa(ptr) + size);
-        return NULL;
+        return page;
 }
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
+/*
+ * Free a DMA buffer.  'size' must be page aligned.
+ */
+static void __dma_free_buffer(struct page *page, size_t size)
 {
-        struct arm_vm_region *c;
+        struct page *e = page + (size >> PAGE_SHIFT);
-        
-        list_for_each_entry(c, &head->vm_list, vm_list) {
+        while (page < e) {
-                if (c->vm_active && c->vm_start == addr)
+                __free_page(page);
-                        goto out;
+                page++;
        }
-        c = NULL;
- out:
-        return c;
 }
+#ifdef CONFIG_MMU
+/*
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+#include "vmregion.h"
+static struct arm_vmregion_head consistent_head = {
+        .vm_lock        = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+        .vm_list        = LIST_HEAD_INIT(consistent_head.vm_list),
+        .vm_start       = CONSISTENT_BASE,
+        .vm_end         = CONSISTENT_END,
+};
 #ifdef CONFIG_HUGETLB_PAGE
 #error ARM Coherent DMA allocator does not (yet) support huge TLB
 #endif
-static void *
+/*
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+ * Initialise the consistent memory allocation.
-            pgprot_t prot)
+ */
+static int __init consistent_init(void)
 {
-        struct page *page;
+        int ret = 0;
-        struct arm_vm_region *c;
+        pgd_t *pgd;
-        unsigned long order;
+        pmd_t *pmd;
-        u64 mask = get_coherent_dma_mask(dev);
+        pte_t *pte;
-        u64 limit;
+        int i = 0;
+        u32 base = CONSISTENT_BASE;
-        if (!consistent_pte[0]) {
+        do {
-                printk(KERN_ERR "%s: not initialised\n", __func__);
+                pgd = pgd_offset(&init_mm, base);
-                dump_stack();
+                pmd = pmd_alloc(&init_mm, pgd, base);
-                return NULL;
+                if (!pmd) {
-        }
+                        printk(KERN_ERR "%s: no pmd tables\n", __func__);
+                        ret = -ENOMEM;
+                        break;
+                }
+                WARN_ON(!pmd_none(*pmd));
-        if (!mask)
+                pte = pte_alloc_kernel(pmd, base);
-                goto no_page;
+                if (!pte) {
+                        printk(KERN_ERR "%s: no pte tables\n", __func__);
+                        ret = -ENOMEM;
+                        break;
+                }
-        /*
+                consistent_pte[i++] = pte;
-         * Sanity check the allocation size.
+                base += (1 << PGDIR_SHIFT);
-         */
+        } while (base < CONSISTENT_END);
-        size = PAGE_ALIGN(size);
-        limit = (mask + 1) & ~mask;
-        if ((limit && size >= limit) ||
-            size >= (CONSISTENT_END - CONSISTENT_BASE)) {
-                printk(KERN_WARNING "coherent allocation too big "
-                       "(requested %#x mask %#llx)\n", size, mask);
-                goto no_page;
-        }
-        order = get_order(size);
+        return ret;
+}
-        if (mask < 0xffffffffULL)
+core_initcall(consistent_init);
-                gfp |= GFP_DMA;
-        page = alloc_pages(gfp, order);
+static void *
-        if (!page)
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
-                goto no_page;
+{
+        struct arm_vmregion *c;
-        /*
+        if (!consistent_pte[0]) {
-         * Invalidate any data that might be lurking in the
+                printk(KERN_ERR "%s: not initialised\n", __func__);
-         * kernel direct-mapped region for device DMA.
+                dump_stack();
-         */
+                return NULL;
-        {
-                void *ptr = page_address(page);
-                memset(ptr, 0, size);
-                dmac_flush_range(ptr, ptr + size);
-                outer_flush_range(__pa(ptr), __pa(ptr) + size);
        }
        /*
         * Allocate a virtual address in the consistent mapping region.
         */
-        c = arm_vm_region_alloc(&consistent_head, size,
+        c = arm_vmregion_alloc(&consistent_head, size,
                            gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
        if (c) {
                pte_t *pte;
-                struct page *end = page + (1 << order);
                int idx = CONSISTENT_PTE_INDEX(c->vm_start);
                u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
                pte = consistent_pte[idx] + off;
                c->vm_pages = page;
-                split_page(page, order);
-                /*
-                 * Set the "dma handle"
-                 */
-                *handle = page_to_dma(dev, page);
                do {
                        BUG_ON(!pte_none(*pte));
-                        /*
-                         * x86 does not mark the pages reserved...
-                         */
-                        SetPageReserved(page);
                        set_pte_ext(pte, mk_pte(page, prot), 0);
                        page++;
                        pte++;
@@ -261,48 +219,90 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
                        }
                } while (size -= PAGE_SIZE);
-                /*
-                 * Free the otherwise unused pages.
-                 */
-                while (page < end) {
-                        __free_page(page);
-                        page++;
-                }
                return (void *)c->vm_start;
        }
-        if (page)
-                __free_pages(page, order);
- no_page:
-        *handle = ~0;
        return NULL;
 }
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+        struct arm_vmregion *c;
+        unsigned long addr;
+        pte_t *ptep;
+        int idx;
+        u32 off;
+        c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+        if (!c) {
+                printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+                       __func__, cpu_addr);
+                dump_stack();
+                return;
+        }
+        if ((c->vm_end - c->vm_start) != size) {
+                printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+                       __func__, c->vm_end - c->vm_start, size);
+                dump_stack();
+                size = c->vm_end - c->vm_start;
+        }
+        idx = CONSISTENT_PTE_INDEX(c->vm_start);
+        off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+        ptep = consistent_pte[idx] + off;
+        addr = c->vm_start;
+        do {
+                pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+                ptep++;
+                addr += PAGE_SIZE;
+                off++;
+                if (off >= PTRS_PER_PTE) {
+                        off = 0;
+                        ptep = consistent_pte[++idx];
+                }
+                if (pte_none(pte) || !pte_present(pte))
+                        printk(KERN_CRIT "%s: bad page in kernel page table\n",
+                               __func__);
+        } while (size -= PAGE_SIZE);
+        flush_tlb_kernel_range(c->vm_start, c->vm_end);
+        arm_vmregion_free(&consistent_head, c);
+}
 #else   /* !CONFIG_MMU */
+#define __dma_alloc_remap(page, size, gfp, prot)        page_address(page)
+#define __dma_free_remap(addr, size)                    do { } while (0)
+#endif  /* CONFIG_MMU */
 static void *
 __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
            pgprot_t prot)
 {
-        void *virt;
+        struct page *page;
-        u64 mask = get_coherent_dma_mask(dev);
+        void *addr;
-        if (!mask)
+        *handle = ~0;
-                goto error;
+        size = PAGE_ALIGN(size);
-        if (mask < 0xffffffffULL)
+        page = __dma_alloc_buffer(dev, size, gfp);
-                gfp |= GFP_DMA;
+        if (!page)
-        virt = kmalloc(size, gfp);
+                return NULL;
-        if (!virt)
-                goto error;
-        *handle =  virt_to_dma(dev, virt);
+        if (!arch_is_coherent())
-        return virt;
+                addr = __dma_alloc_remap(page, size, gfp, prot);
+        else
+                addr = page_address(page);
-error:
+        if (addr)
-        *handle = ~0;
+                *handle = page_to_dma(dev, page);
-        return NULL;
+        return addr;
 }
-#endif  /* CONFIG_MMU */
 /*
 * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -316,19 +316,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
        if (dma_alloc_from_coherent(dev, size, handle, &memory))
                return memory;
-        if (arch_is_coherent()) {
-                void *virt;
-                virt = kmalloc(size, gfp);
-                if (!virt)
-                        return NULL;
-                *handle =  virt_to_dma(dev, virt);
-                return virt;
-        }
        return __dma_alloc(dev, size, handle, gfp,
-                           pgprot_noncached(pgprot_kernel));
+                           pgprot_dmacoherent(pgprot_kernel));
 }
 EXPORT_SYMBOL(dma_alloc_coherent);
@@ -349,15 +338,12 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 {
        int ret = -ENXIO;
 #ifdef CONFIG_MMU
-        unsigned long flags, user_size, kern_size;
+        unsigned long user_size, kern_size;
-        struct arm_vm_region *c;
+        struct arm_vmregion *c;
        user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-        spin_lock_irqsave(&consistent_lock, flags);
+        c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
-        c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-        spin_unlock_irqrestore(&consistent_lock, flags);
        if (c) {
                unsigned long off = vma->vm_pgoff;
@@ -379,7 +365,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
                      void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
-        vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+        vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
        return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
 }
 EXPORT_SYMBOL(dma_mmap_coherent);
@@ -396,144 +382,23 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
 * free a page as defined by the above mapping.
 * Must not be called with IRQs disabled.
 */
-#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
-        struct arm_vm_region *c;
-        unsigned long flags, addr;
-        pte_t *ptep;
-        int idx;
-        u32 off;
        WARN_ON(irqs_disabled());
        if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
                return;
-        if (arch_is_coherent()) {
-                kfree(cpu_addr);
-                return;
-        }
        size = PAGE_ALIGN(size);
-        spin_lock_irqsave(&consistent_lock, flags);
+        if (!arch_is_coherent())
-        c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
+                __dma_free_remap(cpu_addr, size);
-        if (!c)
-                goto no_area;
-        c->vm_active = 0;
-        spin_unlock_irqrestore(&consistent_lock, flags);
-        if ((c->vm_end - c->vm_start) != size) {
-                printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-                       __func__, c->vm_end - c->vm_start, size);
-                dump_stack();
-                size = c->vm_end - c->vm_start;
-        }
-        idx = CONSISTENT_PTE_INDEX(c->vm_start);
-        off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-        ptep = consistent_pte[idx] + off;
-        addr = c->vm_start;
-        do {
-                pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-                unsigned long pfn;
-                ptep++;
-                addr += PAGE_SIZE;
-                off++;
-                if (off >= PTRS_PER_PTE) {
-                        off = 0;
-                        ptep = consistent_pte[++idx];
-                }
-                if (!pte_none(pte) && pte_present(pte)) {
-                        pfn = pte_pfn(pte);
-                        if (pfn_valid(pfn)) {
-                                struct page *page = pfn_to_page(pfn);
-                                /*
-                                 * x86 does not mark the pages reserved...
-                                 */
-                                ClearPageReserved(page);
-                                __free_page(page);
-                                continue;
-                        }
-                }
-                printk(KERN_CRIT "%s: bad page in kernel page table\n",
-                       __func__);
-        } while (size -= PAGE_SIZE);
-        flush_tlb_kernel_range(c->vm_start, c->vm_end);
-        spin_lock_irqsave(&consistent_lock, flags);
-        list_del(&c->vm_list);
-        spin_unlock_irqrestore(&consistent_lock, flags);
-        kfree(c);
-        return;
- no_area:
+        __dma_free_buffer(dma_to_page(dev, handle), size);
-        spin_unlock_irqrestore(&consistent_lock, flags);
-        printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-               __func__, cpu_addr);
-        dump_stack();
 }
-#else   /* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-        if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-                return;
-        kfree(cpu_addr);
-}
-#endif  /* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 /*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
-{
-        int ret = 0;
-#ifdef CONFIG_MMU
-        pgd_t *pgd;
-        pmd_t *pmd;
-        pte_t *pte;
-        int i = 0;
-        u32 base = CONSISTENT_BASE;
-        do {
-                pgd = pgd_offset(&init_mm, base);
-                pmd = pmd_alloc(&init_mm, pgd, base);
-                if (!pmd) {
-                        printk(KERN_ERR "%s: no pmd tables\n", __func__);
-                        ret = -ENOMEM;
-                        break;
-                }
-                WARN_ON(!pmd_none(*pmd));
-                pte = pte_alloc_kernel(pmd, base);
-                if (!pte) {
-                        printk(KERN_ERR "%s: no pte tables\n", __func__);
-                        ret = -ENOMEM;
-                        break;
-                }
-                consistent_pte[i++] = pte;
-                base += (1 << PGDIR_SHIFT);
-        } while (base < CONSISTENT_END);
-#endif  /* !CONFIG_MMU */
-        return ret;
-}
-core_initcall(consistent_init);
-/*
 * Make an area consistent for devices.
 * Note: Drivers should NOT use this function directly, as it will break
 * platforms with CONFIG_DMABOUNCE.
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6a3703..729602291958 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include "mm.h"
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 /*
@@ -151,7 +153,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
        if (!pfn_valid(pfn))
                return;
+        /*
+         * The zero page is never written to, so never has any dirty
+         * cache lines, and therefore never needs to be flushed.
+         */
        page = pfn_to_page(pfn);
+        if (page == ZERO_PAGE(0))
+                return;
        mapping = page_mapping(page);
 #ifndef CONFIG_SMP
        if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7f294f307c83..329594e760cd 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -35,14 +35,12 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
            :
            : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
            : "cc");
-        __flush_icache_all();
 }
 void flush_cache_mm(struct mm_struct *mm)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
+                vivt_flush_cache_mm(mm);
-                        __cpuc_flush_user_all();
                return;
        }
@@ -52,16 +50,13 @@ void flush_cache_mm(struct mm_struct *mm)
                    :
                    : "r" (0)
                    : "cc");
-                __flush_icache_all();
        }
 }
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
+                vivt_flush_cache_range(vma, start, end);
-                        __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-                                                vma->vm_flags);
                return;
        }
@@ -71,22 +66,26 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
                    :
                    : "r" (0)
                    : "cc");
-                __flush_icache_all();
        }
+        if (vma->vm_flags & VM_EXEC)
+                __flush_icache_all();
 }
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+                vivt_flush_cache_page(vma, user_addr, pfn);
-                        unsigned long addr = user_addr & PAGE_MASK;
-                        __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-                }
                return;
        }
-        if (cache_is_vipt_aliasing())
+        if (cache_is_vipt_aliasing()) {
                flush_pfn_alias(pfn, user_addr);
+                __flush_icache_all();
+        }
+        if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+                __flush_icache_all();
 }
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -94,15 +93,13 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                         unsigned long len, int write)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+                vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
-                        unsigned long addr = (unsigned long)kaddr;
-                        __cpuc_coherent_kern_range(addr, addr + len);
-                }
                return;
        }
        if (cache_is_vipt_aliasing()) {
                flush_pfn_alias(page_to_pfn(page), uaddr);
+                __flush_icache_all();
                return;
        }
@@ -120,6 +117,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
+        void *addr = page_address(page);
        /*
         * Writeback any data associated with the kernel mapping of this
         * page.  This ensures that data in the physical page is mutually
@@ -130,9 +129,9 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
         * kmap_atomic() doesn't set the page virtual address, and
         * kunmap_atomic() takes care of cache flushing already.
         */
-        if (page_address(page))
+        if (addr)
 #endif
-                __cpuc_flush_dcache_page(page_address(page));
+                __cpuc_flush_dcache_page(addr);
        /*
         * If this is a page cache page, and we have an aliasing VIPT cache,
@@ -196,7 +195,16 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 */
 void flush_dcache_page(struct page *page)
 {
-        struct address_space *mapping = page_mapping(page);
+        struct address_space *mapping;
+        /*
+         * The zero page is never written to, so never has any dirty
+         * cache lines, and therefore never needs to be flushed.
+         */
+        if (page == ZERO_PAGE(0))
+                return;
+        mapping = page_mapping(page);
 #ifndef CONFIG_SMP
        if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -242,6 +250,7 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
                 * userspace address only.
                 */
                flush_pfn_alias(pfn, vmaddr);
+                __flush_icache_all();
        }
        /*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05198e0..a888363398f8 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@ struct mem_type {
 const struct mem_type *get_mem_type(unsigned int type);
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
 #endif
 struct map_desc;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0223ac..2427cdcd9098 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1036,7 +1036,7 @@ void __init paging_init(struct machine_desc *mdesc)
         */
        zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
        empty_zero_page = virt_to_page(zero_page);
-        flush_dcache_page(empty_zero_page);
+        __flush_dcache_page(NULL, empty_zero_page);
 }
 /*
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 000000000000..19e09bdb1b8a
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include "vmregion.h"
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vmregion   region;
+ *    unsigned long     flags;
+ *    struct page       **pages;
+ *    unsigned int      nr_pages;
+ *    unsigned long     phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ *  struct vmregion vmalloc_head = {
+ *      .vm_list        = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *      .vm_start       = VMALLOC_START,
+ *      .vm_end         = VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+        unsigned long addr = head->vm_start, end = head->vm_end - size;
+        unsigned long flags;
+        struct arm_vmregion *c, *new;
+        if (head->vm_end - head->vm_start < size) {
+                printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+                        __func__, size);
+                goto out;
+        }
+        new = kmalloc(sizeof(struct arm_vmregion), gfp);
+        if (!new)
+                goto out;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        list_for_each_entry(c, &head->vm_list, vm_list) {
+                if ((addr + size) < addr)
+                        goto nospc;
+                if ((addr + size) <= c->vm_start)
+                        goto found;
+                addr = c->vm_end;
+                if (addr > end)
+                        goto nospc;
+        }
+ found:
+        /*
+         * Insert this entry _before_ the one we found.
+         */
+        list_add_tail(&new->vm_list, &c->vm_list);
+        new->vm_start = addr;
+        new->vm_end = addr + size;
+        new->vm_active = 1;
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        return new;
+ nospc:
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        kfree(new);
+ out:
+        return NULL;
+}
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+        struct arm_vmregion *c;
+        list_for_each_entry(c, &head->vm_list, vm_list) {
+                if (c->vm_active && c->vm_start == addr)
+                        goto out;
+        }
+        c = NULL;
+ out:
+        return c;
+}
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+        struct arm_vmregion *c;
+        unsigned long flags;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        c = __arm_vmregion_find(head, addr);
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        return c;
+}
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+        struct arm_vmregion *c;
+        unsigned long flags;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        c = __arm_vmregion_find(head, addr);
+        if (c)
+                c->vm_active = 0;
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        return c;
+}
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        list_del(&c->vm_list);
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 000000000000..6b2cdbdf3a85
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+#include <linux/spinlock.h>
+#include <linux/list.h>
+struct page;
+struct arm_vmregion_head {
+        spinlock_t              vm_lock;
+        struct list_head        vm_list;
+        unsigned long           vm_start;
+        unsigned long           vm_end;
+};
+struct arm_vmregion {
+        struct list_head        vm_list;
+        unsigned long           vm_start;
+        unsigned long           vm_end;
+        struct page             *vm_pages;
+        int                     vm_active;
+};
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+#endif
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 000000000000..159daf583f85
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+config PLAT_NOMADIK
+        bool
+        depends on ARCH_NOMADIK || ARCH_U8500
+        default y
+        help
+          Common platform code for Nomadik and other ST-Ericsson
+          platforms.
+if PLAT_NOMADIK
+config HAS_MTU
+        bool
+        help
+          Support for Multi Timer Unit. MTU provides access
+          to multiple interrupt generating programmable
+          32-bit free running decrementing counters.
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 000000000000..37c7cdd0f8f0
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+obj-$(CONFIG_HAS_MTU)   += timer.o
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 76da7f085330..42c907258b14 100644
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,5 +1,8 @@
-#ifndef __ASM_ARCH_MTU_H
+#ifndef __PLAT_MTU_H
-#define __ASM_ARCH_MTU_H
+#define __PLAT_MTU_H
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
 /*
 * The MTU device hosts four different counters, with 4 set of
@@ -41,5 +44,5 @@
 #define MTU_PCELL2      0xff8
 #define MTU_PCELL3      0xffC
-#endif /* __ASM_ARCH_MTU_H */
+#endif /* __PLAT_MTU_H */
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index d1738e7061d4..62f18ad43a28 100644
--- a/arch/arm/mach-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -15,19 +15,14 @@
 #include <linux/clockchips.h>
 #include <linux/jiffies.h>
 #include <asm/mach/time.h>
-#include <mach/mtu.h>
-#define TIMER_CTRL      0x80    /* No divisor */
+#include <plat/mtu.h>
-#define TIMER_PERIODIC  0x40
-#define TIMER_SZ32BIT   0x02
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK        0x00007fff
-#define SRC_CR_INIT_VAL         0x2aaa8000
 static u32      nmdk_count;             /* accumulated count */
 static u32      nmdk_cycle;             /* write-once */
-static __iomem void *mtu_base;
+/* setup by the platform code */
+void __iomem *mtu_base;
 /*
 * clocksource: the MTU device is a decrementing counters, so we negate
@@ -93,7 +88,7 @@ static struct clock_event_device nmdk_clkevt = {
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
        /* ack: "interrupt clear register" */
-        writel( 1 << 0, mtu_base + MTU_ICR);
+        writel(1 << 0, mtu_base + MTU_ICR);
        /* we can't count lost ticks, unfortunately */
        nmdk_count += nmdk_cycle;
@@ -125,24 +120,14 @@ static void nmdk_timer_reset(void)
        writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 }
-static void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void)
 {
-        u32 src_cr;
        unsigned long rate;
        int bits;
        rate = CLOCK_TICK_RATE; /* 2.4MHz */
        nmdk_cycle = (rate + HZ/2) / HZ;
-        /* Configure timer sources in "system reset controller" ctrl reg */
-        src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-        src_cr &= SRC_CR_INIT_MASK;
-        src_cr |= SRC_CR_INIT_VAL;
-        writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-        /* Save global pointer to mtu, used by functions above */
-        mtu_base = io_p2v(NOMADIK_MTU0_BASE);
        /* Init the timer and register clocksource */
        nmdk_timer_reset();
@@ -150,7 +135,9 @@ static void __init nmdk_timer_init(void)
        bits =  8*sizeof(nmdk_count);
        nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
-        clocksource_register(&nmdk_clksrc);
+        if (clocksource_register(&nmdk_clksrc))
+                printk(KERN_ERR "timer: failed to initialize clock "
+                        "source %s\n", nmdk_clksrc.name);
        /* Register irq and clockevents */
        setup_irq(IRQ_MTU0, &nmdk_timer_irq);
@@ -158,7 +145,3 @@ static void __init nmdk_timer_init(void)
        nmdk_clkevt.cpumask = cpumask_of(0);
        clockevents_register_device(&nmdk_clkevt);
 }
-struct sys_timer nomadik_timer = {
-        .init           = nmdk_timer_init,
-};
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 9ad41dc484c1..3325f7b49eaa 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -68,6 +68,13 @@
                __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
           __dma; })
+#define __arch_dma_to_page(dev, addr)   \
+        ({ dma_addr_t __dma = addr;                             \
+           if (is_lbus_device(dev))                             \
+                __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;      \
+           phys_to_page(__dma);                                 \
+        })
 #define __arch_dma_to_virt(dev, addr)   ({ (void *) (is_lbus_device(dev) ? \
                                                lbus_to_virt(addr) : \
                                                __phys_to_virt(addr)); })
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b401dadad4a8..eb140ff38c27 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -54,7 +54,7 @@ config DW_DMAC
 config AT_HDMAC
        tristate "Atmel AHB DMA support"
-        depends on ARCH_AT91SAM9RL
+        depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
        select DMA_ENGINE
        help
          Support the Atmel AHB DMA controller.  This can be integrated in
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a5894a6bb..90d168ad03b6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
                                clk = 255;
                        host->cclk = host->mclk / (2 * (clk + 1));
                }
-                if (host->hw_designer == 0x80)
+                if (host->hw_designer == AMBA_VENDOR_ST)
                        clk |= MCI_FCEN; /* Bug fix in ST IP block */
                clk |= MCI_CLK_ENABLE;
                /* This hasn't proven to be worthwhile */