34 files changed, 206 insertions, 258 deletions

diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index b3f6e943e661..f0ef0082c317 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -476,8 +476,7 @@ static void __init htcherald_lcd_init(void)
                                 break;
                 }
                 if (!tries)
-                        printk(KERN_WARNING "Timeout waiting for end of frame "
-                               "-- LCD may not be available\n");
+                        pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
 
                 /* turn off DMA */
                 reg = omap_readw(OMAP_DMA_LCD_CCR);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index a9ee06b6cb42..638f4070fc70 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -587,8 +587,8 @@ void omap1_clk_disable_unused(struct clk *clk)
         /* Clocks in the DSP domain need api_ck. Just assume bootloader
          * has not enabled any DSP clocks */
         if (clk->enable_reg == DSP_IDLECT2) {
-                printk(KERN_INFO "Skipping reset check for DSP domain "
-                       "clock \"%s\"\n", clk->name);
+                pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
+                        clk->name);
                 return;
         }
 
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c007d80dfb62..243e8b2865f5 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -776,11 +776,10 @@ static struct clk_functions omap1_clk_functions = {
 
 static void __init omap1_show_rates(void)
 {
-        pr_notice("Clocking rate (xtal/DPLL1/MPU): "
-                        "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-                ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-                ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-                arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+        pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+                  ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+                  ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+                  arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 }
 
 u32 cpu_mask;
@@ -848,8 +847,8 @@ int __init omap1_clk_init(void)
         if (cpu_is_omap16xx() && crystal_type == 2)
                 ck_ref.rate = 19200000;
 
-        pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
-                "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+        pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+                omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
                 omap_readw(ARM_CKCTL));
 
         /* We want to be in syncronous scalable mode */
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 3ef7d52316b4..f51014d1a614 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -330,8 +330,9 @@ static int __init omap1_system_dma_init(void)
         d->chan = kzalloc(sizeof(struct omap_dma_lch) *
                                         (d->lch_count), GFP_KERNEL);
         if (!d->chan) {
-                dev_err(&pdev->dev, "%s: Memory allocation failed"
-                                        "for d->chan!!!\n", __func__);
+                dev_err(&pdev->dev,
+                        "%s: Memory allocation failed for d->chan!\n",
+                        __func__);
                 goto exit_release_d;
         }
 
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 5769c71815b2..ed42628611bc 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -113,8 +113,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
         if (cpu_is_omap15xx()) {
-                printk(KERN_ERR "DMA virtual resolution is not supported "
-                                "in 1510 mode\n");
+                pr_err("DMA virtual resolution is not supported in 1510 mode\n");
                 BUG();
         }
         lcd_dma.vxres = vxres;
@@ -437,8 +436,7 @@ static int __init omap_init_lcd_dma(void)
         r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
                         "LCD DMA", NULL);
         if (r != 0)
-                printk(KERN_ERR "unable to request IRQ for LCD DMA "
-                               "(error %d)\n", r);
+                pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
 
         return r;
 }
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 677357ff61ac..807299a1f79d 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -553,8 +553,8 @@ static int n8x0_auto_sleep_regulators(void)
 
         ret = menelaus_set_regulator_sleep(1, val);
         if (ret < 0) {
-                printk(KERN_ERR "Could not set regulators to sleep on "
-                        "menelaus: %u\n", ret);
+                pr_err("Could not set regulators to sleep on menelaus: %u\n",
+                       ret);
                 return ret;
         }
         return 0;
@@ -566,8 +566,7 @@ static int n8x0_auto_voltage_scale(void)
 
         ret = menelaus_set_vcore_hw(1400, 1050);
         if (ret < 0) {
-                printk(KERN_ERR "Could not set VCORE voltage on "
-                        "menelaus: %u\n", ret);
+                pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
                 return ret;
         }
         return 0;
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 779734d8ba37..175135a967b5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -522,8 +522,7 @@ static void __init overo_init(void)
                 udelay(10);
                 gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
         } else {
-                printk(KERN_ERR "could not obtain gpio for "
-                                        "OVERO_GPIO_W2W_NRESET\n");
+                pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
         }
 
         ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
@@ -542,8 +541,7 @@ static void __init overo_init(void)
         if (ret == 0)
                 gpio_export(OVERO_GPIO_USBH_CPEN, 0);
         else
-                printk(KERN_ERR "could not obtain gpio for "
-                                        "OVERO_GPIO_USBH_CPEN\n");
+                pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f64f44173061..1873059861f2 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -81,8 +81,7 @@ static inline void __init zoom_init_quaduart(void)
         quart_cs = ZOOM_QUADUART_CS;
 
         if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-                printk(KERN_ERR "Failed to request GPMC mem"
-                                "for Quad UART(TL16CP754C)\n");
+                pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
                 return;
         }
 
@@ -104,8 +103,8 @@ static inline int omap_zoom_debugboard_detect(void)
 
         if (gpio_request_one(debug_board_detect, GPIOF_IN,
                              "Zoom debug board detect") < 0) {
-                printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
-                "board detect\n", debug_board_detect);
+                pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
+                       debug_board_detect);
                 return 0;
         }
 
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index d6e34dd9e7e7..298887b5bf66 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -92,15 +92,13 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 
         pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
                  validrate);
-        pr_debug("clock: SDRC CS0 timing params used:"
-                 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+        pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
                  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
                  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
         if (sdrc_cs1)
-                pr_debug("clock: SDRC CS1 timing params used: "
-                 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-                 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-                 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+                pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+                         sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+                         sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 
         if (sdrc_cs1)
                 omap3_configure_core_dpll(
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 04d551b1f7f7..19a980956d44 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -71,8 +71,8 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
 
         if (!clks->parent) {
                 /* This indicates a data problem */
-                WARN(1, "clock: Could not find parent clock %s in clksel array "
-                     "of clock %s\n", src_clk->name, clk->name);
+                WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
+                     clk->name, src_clk->name);
                 return NULL;
         }
 
@@ -126,8 +126,8 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
 
         if (max_div == 0) {
                 /* This indicates an error in the clksel data */
-                WARN(1, "clock: Could not find divisor for clock %s parent %s"
-                     "\n", clk->name, src_clk->parent->name);
+                WARN(1, "clock: %s: could not find divisor for parent %s\n",
+                     clk->name, src_clk->parent->name);
                 return 0;
         }
 
@@ -191,8 +191,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
 
         if (!clkr->div) {
                 /* This indicates a data error */
-                WARN(1, "clock: Could not find fieldval %d for clock %s parent "
-                     "%s\n", field_val, clk->name, clk->parent->name);
+                WARN(1, "clock: %s: could not find fieldval %d parent %s\n",
+                     clk->name, field_val, clk->parent->name);
                 return 0;
         }
 
@@ -230,8 +230,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
         }
 
         if (!clkr->div) {
-                pr_err("clock: Could not find divisor %d for clock %s parent "
-                       "%s\n", div, clk->name, clk->parent->name);
+                pr_err("clock: %s: could not find divisor %d parent %s\n",
+                       clk->name, div, clk->parent->name);
                 return ~0;
         }
 
@@ -300,8 +300,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
                 /* Sanity check */
                 if (clkr->div <= last_div)
-                        pr_err("clock: clksel_rate table not sorted "
-                               "for clock %s", clk->name);
+                        pr_err("clock: %s: clksel_rate table not sorted",
+                               clk->name);
 
                 last_div = clkr->div;
 
@@ -312,9 +312,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
         }
 
         if (!clkr->div) {
-                pr_err("clock: Could not find divisor for target "
-                       "rate %ld for clock %s parent %s\n", target_rate,
-                       clk->name, clk->parent->name);
+                pr_err("clock: %s: could not find divisor for target rate %ld parent %s\n",
+                       clk->name, target_rate, clk->parent->name);
                 return ~0;
         }
 
@@ -359,8 +358,7 @@ void omap2_init_clksel_parent(struct clk *clk)
 
                         if (clkr->val == r) {
                                 if (clk->parent != clks->parent) {
-                                        pr_debug("clock: inited %s parent "
-                                                 "to %s (was %s)\n",
+                                        pr_debug("clock: %s: inited parent to %s (was %s)\n",
                                                  clk->name, clks->parent->name,
                                                  ((clk->parent) ?
                                                   clk->parent->name : "NULL"));
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index cd7fd0f91149..f0b6b4bb8b0f 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -105,13 +105,13 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
         }
 
         if (fint < fint_min) {
-                pr_debug("rejecting n=%d due to Fint failure, "
-                         "lowering max_divider\n", n);
+                pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+                         n);
                 dd->max_divider = n;
                 ret = DPLL_FINT_UNDERFLOW;
         } else if (fint > fint_max) {
-                pr_debug("rejecting n=%d due to Fint failure, "
-                         "boosting min_divider\n", n);
+                pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+                         n);
                 dd->min_divider = n;
                 ret = DPLL_FINT_INVALID;
         } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ea3f565ba1a4..eeaf35367c80 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -102,8 +102,8 @@ void omap2_init_clk_clkdm(struct clk *clk)
                          clk->name, clk->clkdm_name);
                 clk->clkdm = clkdm;
         } else {
-                pr_debug("clock: could not associate clk %s to "
-                         "clkdm %s\n", clk->name, clk->clkdm_name);
+                pr_debug("clock: could not associate clk %s to clkdm %s\n",
+                         clk->name, clk->clkdm_name);
         }
 }
 
@@ -226,8 +226,7 @@ void omap2_dflt_clk_disable(struct clk *clk)
                  * 'Independent' here refers to a clock which is not
                  * controlled by its parent.
                  */
-                printk(KERN_ERR "clock: clk_disable called on independent "
-                       "clock %s which has no enable_reg\n", clk->name);
+                pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name);
                 return;
         }
 
@@ -270,8 +269,7 @@ const struct clkops clkops_omap2_dflt = {
 void omap2_clk_disable(struct clk *clk)
 {
         if (clk->usecount == 0) {
-                WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
-                     "already 0?", clk->name);
+                WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name);
                 return;
         }
 
@@ -332,8 +330,8 @@ int omap2_clk_enable(struct clk *clk)
         if (clkdm_control && clk->clkdm) {
                 ret = clkdm_clk_enable(clk->clkdm, clk);
                 if (ret) {
-                        WARN(1, "clock: %s: could not enable clockdomain %s: "
-                             "%d\n", clk->name, clk->clkdm->name, ret);
+                        WARN(1, "clock: %s: could not enable clockdomain %s: %d\n",
+                             clk->name, clk->clkdm->name, ret);
                         goto oce_err2;
                 }
         }
@@ -501,10 +499,8 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 
         hfclkin_rate = clk_get_rate(hfclkin_ck);
 
-        pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
-                "%ld.%01ld/%ld/%ld MHz\n",
-                (hfclkin_rate / 1000000),
-                ((hfclkin_rate / 100000) % 10),
+        pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+                (hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
                 (clk_get_rate(core_ck) / 1000000),
                 (clk_get_rate(mpu_ck) / 1000000));
 }
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 794d82702c85..912108e7d515 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -49,8 +49,7 @@ int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
          * on DPLL4.
          */
         if (omap_rev() == OMAP3430_REV_ES1_0) {
-                pr_err("clock: DPLL4 cannot change rate due to "
-                       "silicon 'Limitation 2.5' on 3430ES1.\n");
+                pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
                 return -EINVAL;
         }
 
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8664f5a8bfb6..a1555627ad97 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -174,9 +174,8 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm)
                 if (IS_ERR(autodep->clkdm.ptr))
                         continue;
 
-                pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-                         "clkdm %s\n", autodep->clkdm.ptr->name,
-                         clkdm->name);
+                pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
+                         clkdm->name, autodep->clkdm.ptr->name);
 
                 clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
                 clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
@@ -205,9 +204,8 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm)
                 if (IS_ERR(autodep->clkdm.ptr))
                         continue;
 
-                pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-                         "clkdm %s\n", autodep->clkdm.ptr->name,
-                         clkdm->name);
+                pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
+                         clkdm->name, autodep->clkdm.ptr->name);
 
                 clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
                 clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
@@ -469,14 +467,14 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
                 ret = -EINVAL;
 
         if (ret) {
-                pr_debug("clockdomain: hardware cannot set/clear wake up of "
-                         "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+                pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+                         clkdm1->name, clkdm2->name);
                 return ret;
         }
 
         if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
-                pr_debug("clockdomain: hardware will wake up %s when %s wakes "
-                         "up\n", clkdm1->name, clkdm2->name);
+                pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
+                         clkdm1->name, clkdm2->name);
 
                 ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
         }
@@ -510,14 +508,14 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
                 ret = -EINVAL;
 
         if (ret) {
-                pr_debug("clockdomain: hardware cannot set/clear wake up of "
-                         "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+                pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+                         clkdm1->name, clkdm2->name);
                 return ret;
         }
 
         if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
-                pr_debug("clockdomain: hardware will no longer wake up %s "
-                         "after %s wakes up\n", clkdm1->name, clkdm2->name);
+                pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
+                         clkdm1->name, clkdm2->name);
 
                 ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
         }
@@ -555,8 +553,8 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
                 ret = -EINVAL;
 
         if (ret) {
-                pr_debug("clockdomain: hardware cannot set/clear wake up of "
-                         "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+                pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+                         clkdm1->name, clkdm2->name);
                 return ret;
         }
 
@@ -613,15 +611,14 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
                 ret = -EINVAL;
 
         if (ret) {
-                pr_debug("clockdomain: hardware cannot set/clear sleep "
-                         "dependency affecting %s from %s\n", clkdm1->name,
-                         clkdm2->name);
+                pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+                         clkdm1->name, clkdm2->name);
                 return ret;
         }
 
         if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
-                pr_debug("clockdomain: will prevent %s from sleeping if %s "
-                         "is active\n", clkdm1->name, clkdm2->name);
+                pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
+                         clkdm1->name, clkdm2->name);
 
                 ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
         }
@@ -657,16 +654,14 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
                 ret = -EINVAL;
 
         if (ret) {
-                pr_debug("clockdomain: hardware cannot set/clear sleep "
-                         "dependency affecting %s from %s\n", clkdm1->name,
-                         clkdm2->name);
+                pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+                         clkdm1->name, clkdm2->name);
                 return ret;
         }
 
         if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
-                pr_debug("clockdomain: will no longer prevent %s from "
-                         "sleeping if %s is active\n", clkdm1->name,
-                         clkdm2->name);
+                pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
+                         clkdm1->name, clkdm2->name);
 
                 ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
         }
@@ -706,9 +701,8 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
                 ret = -EINVAL;
 
         if (ret) {
-                pr_debug("clockdomain: hardware cannot set/clear sleep "
-                         "dependency affecting %s from %s\n", clkdm1->name,
-                         clkdm2->name);
+                pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+                         clkdm1->name, clkdm2->name);
                 return ret;
         }
 
@@ -755,8 +749,8 @@ int clkdm_sleep(struct clockdomain *clkdm)
                 return -EINVAL;
 
         if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
-                pr_debug("clockdomain: %s does not support forcing "
-                         "sleep via software\n", clkdm->name);
+                pr_debug("clockdomain: %s does not support forcing sleep via software\n",
+                         clkdm->name);
                 return -EINVAL;
         }
 
@@ -790,8 +784,8 @@ int clkdm_wakeup(struct clockdomain *clkdm)
                 return -EINVAL;
 
         if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
-                pr_debug("clockdomain: %s does not support forcing "
-                         "wakeup via software\n", clkdm->name);
+                pr_debug("clockdomain: %s does not support forcing wakeup via software\n",
+                         clkdm->name);
                 return -EINVAL;
         }
 
@@ -826,8 +820,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
                 return;
 
         if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
-                pr_debug("clock: automatic idle transitions cannot be enabled "
-                         "on clockdomain %s\n", clkdm->name);
+                pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
+                         clkdm->name);
                 return;
         }
 
@@ -861,8 +855,8 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
                 return;
 
         if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
-                pr_debug("clockdomain: automatic idle transitions cannot be "
-                         "disabled on %s\n", clkdm->name);
+                pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
+                         clkdm->name);
                 return;
         }
 
@@ -927,7 +921,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
         pwrdm_state_switch(clkdm->pwrdm.ptr);
         spin_unlock_irqrestore(&clkdm->lock, flags);
 
-        pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+        pr_debug("clockdomain: %s: enabled\n", clkdm->name);
 
         return 0;
 }
@@ -952,7 +946,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
         pwrdm_state_switch(clkdm->pwrdm.ptr);
         spin_unlock_irqrestore(&clkdm->lock, flags);
 
-        pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+        pr_debug("clockdomain: %s: disabled\n", clkdm->name);
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c1875862679f..7db75cb6218e 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -119,8 +119,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
         }
 
         if (nandcs > GPMC_CS_NUM) {
-                printk(KERN_INFO "NAND: Unable to find configuration "
-                                 "in GPMC\n ");
+                pr_info("NAND: Unable to find configuration in GPMC\n");
                 return;
         }
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 40373db649aa..d0631468662a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -161,9 +161,8 @@ void __init omap2xxx_check_revision(void)
         }
 
         if (j == ARRAY_SIZE(omap_ids)) {
-                printk(KERN_ERR "Unknown OMAP device type. "
-                                "Handling it as OMAP%04x\n",
-                                omap_ids[i].type >> 16);
+                pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
+                       omap_ids[i].type >> 16);
                 j = i;
         }
 
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index bcd83db41bbc..a4dd4cf289f6 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -107,9 +107,8 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
         unsigned long tmp;
 
         tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
-        printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
-                         "(revision %ld.%ld) with %d interrupts\n",
-                         bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+        pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n",
+                bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 
         tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
         tmp |= 1 << 1;  /* soft reset */
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bd69eaefcc97..ae0dd96f7795 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1641,8 +1641,8 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 
         /* clocks must be on for this operation */
         if (oh->_state != _HWMOD_STATE_ENABLED) {
-                pr_warning("omap_hwmod: %s: reset can only be entered from "
-                           "enabled state\n", oh->name);
+                pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",
+                        oh->name);
                 return -EINVAL;
         }
 
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index d8f6dbf45d16..45ad7f74f356 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -64,25 +64,22 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
                 }
                 oh = omap_hwmod_lookup(opp_def->hwmod_name);
                 if (!oh || !oh->od) {
-                        pr_debug("%s: no hwmod or odev for %s, [%d] "
-                                "cannot add OPPs.\n", __func__,
-                                opp_def->hwmod_name, i);
+                        pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n",
+                                 __func__, opp_def->hwmod_name, i);
                         continue;
                 }
                 dev = &oh->od->pdev->dev;
 
                 r = opp_add(dev, opp_def->freq, opp_def->u_volt);
                 if (r) {
-                        dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
-                                "result=%d\n",
-                               __func__, opp_def->freq,
-                               opp_def->hwmod_name, i, r);
+                        dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
+                                __func__, opp_def->freq,
+                                opp_def->hwmod_name, i, r);
                 } else {
                         if (!opp_def->default_available)
                                 r = opp_disable(dev, opp_def->freq);
                         if (r)
-                                dev_err(dev, "%s: disable %ld failed for %s "
-                                        "[%d] result=%d\n",
+                                dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
                                         __func__, opp_def->freq,
                                         opp_def->hwmod_name, i, r);
                 }
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 9cb5cede0f50..939bd6f70b51 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -203,8 +203,8 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
         bootup_volt = opp_get_voltage(opp);
         rcu_read_unlock();
         if (!bootup_volt) {
-                pr_err("%s: unable to find voltage corresponding "
-                        "to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+                pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
+                       __func__, vdd_name);
                 goto exit;
         }
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 05bd8f02723f..0e8872e1b3ee 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -389,9 +389,8 @@ restore:
         list_for_each_entry(pwrst, &pwrst_list, node) {
                 state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
                 if (state > pwrst->next_state) {
-                        pr_info("Powerdomain (%s) didn't enter "
-                                "target state %d\n",
-                               pwrst->pwrdm->name, pwrst->next_state);
+                        pr_info("Powerdomain (%s) didn't enter target state %d\n",
+                                pwrst->pwrdm->name, pwrst->next_state);
                         ret = -1;
                 }
                 omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -731,8 +730,7 @@ int __init omap3_pm_init(void)
                 omap3_secure_ram_storage =
                         kmalloc(0x803F, GFP_KERNEL);
                 if (!omap3_secure_ram_storage)
-                        pr_err("Memory allocation failed when "
-                               "allocating for secure sram context\n");
+                        pr_err("Memory allocation failed when allocating for secure sram context\n");
 
                 local_irq_disable();
                 local_fiq_disable();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index ea24174f5707..04922d149068 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -69,9 +69,8 @@ static int omap4_pm_suspend(void)
         list_for_each_entry(pwrst, &pwrst_list, node) {
                 state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
                 if (state > pwrst->next_state) {
-                        pr_info("Powerdomain (%s) didn't enter "
-                               "target state %d\n",
-                               pwrst->pwrdm->name, pwrst->next_state);
+                        pr_info("Powerdomain (%s) didn't enter target state %d\n",
+                                pwrst->pwrdm->name, pwrst->next_state);
                         ret = -1;
                 }
                 omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -189,8 +188,7 @@ int __init omap4_pm_init(void)
         ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
         ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
         if (ret) {
-                pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
-                                "wakeup dependency\n");
+                pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
                 goto err2;
         }
 
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 69b36e185e9b..153cfe0ed158 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -339,8 +339,8 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
         if (!pwrdm || !clkdm)
                 return -EINVAL;
 
-        pr_debug("powerdomain: associating clockdomain %s with powerdomain "
-                 "%s\n", clkdm->name, pwrdm->name);
+        pr_debug("powerdomain: %s: associating clockdomain %s\n",
+                 pwrdm->name, clkdm->name);
 
         for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
                 if (!pwrdm->pwrdm_clkdms[i])
@@ -354,8 +354,8 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
         }
 
         if (i == PWRDM_MAX_CLKDMS) {
-                pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
-                         "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
+                pr_debug("powerdomain: %s: increase PWRDM_MAX_CLKDMS for clkdm %s\n",
+                         pwrdm->name, clkdm->name);
                 WARN_ON(1);
                 ret = -ENOMEM;
                 goto pac_exit;
@@ -387,16 +387,16 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
         if (!pwrdm || !clkdm)
                 return -EINVAL;
 
-        pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
-                 "%s\n", clkdm->name, pwrdm->name);
+        pr_debug("powerdomain: %s: dissociating clockdomain %s\n",
+                 pwrdm->name, clkdm->name);
 
         for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
                 if (pwrdm->pwrdm_clkdms[i] == clkdm)
                         break;
 
         if (i == PWRDM_MAX_CLKDMS) {
-                pr_debug("powerdomain: clkdm %s not associated with pwrdm "
-                         "%s ?!\n", clkdm->name, pwrdm->name);
+                pr_debug("powerdomain: %s: clkdm %s not associated?!\n",
+                         pwrdm->name, clkdm->name);
                 ret = -ENOENT;
                 goto pdc_exit;
         }
@@ -485,7 +485,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
         if (!(pwrdm->pwrsts & (1 << pwrst)))
                 return -EINVAL;
 
-        pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
+        pr_debug("powerdomain: %s: setting next powerstate to %0x\n",
                  pwrdm->name, pwrst);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
@@ -587,7 +587,7 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
         if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
                 return -EINVAL;
 
-        pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
+        pr_debug("powerdomain: %s: setting next logic powerstate to %0x\n",
                  pwrdm->name, pwrst);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst)
@@ -624,8 +624,8 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
         if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
                 return -EINVAL;
 
-        pr_debug("powerdomain: setting next memory powerstate for domain %s "
-                 "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
+        pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-ON to %0x\n",
+                 pwrdm->name, bank, pwrst);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst)
                 ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst);
@@ -662,8 +662,8 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
         if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
                 return -EINVAL;
 
-        pr_debug("powerdomain: setting next memory powerstate for domain %s "
-                 "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
+        pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-RET to %0x\n",
+                 pwrdm->name, bank, pwrst);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst)
                 ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst);
@@ -841,7 +841,7 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
          * warn & fail if it is not ON.
          */
 
-        pr_debug("powerdomain: clearing previous power state reg for %s\n",
+        pr_debug("powerdomain: %s: clearing previous power state reg\n",
                  pwrdm->name);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst)
@@ -871,8 +871,7 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
         if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
                 return ret;
 
-        pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
-                 pwrdm->name);
+        pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", pwrdm->name);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar)
                 ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm);
@@ -901,8 +900,7 @@ int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
         if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
                 return ret;
 
-        pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
-                 pwrdm->name);
+        pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", pwrdm->name);
 
         if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar)
                 ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index 0f0a9f1592fe..3950ccfe5f4a 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -122,8 +122,8 @@ static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
                         udelay(1);
 
         if (c > PWRDM_TRANSITION_BAILOUT) {
-                printk(KERN_ERR "powerdomain: waited too long for "
-                        "powerdomain %s to complete transition\n", pwrdm->name);
+                pr_err("powerdomain: %s: waited too long to complete transition\n",
+                       pwrdm->name);
                 return -EAGAIN;
         }
 
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
index 601325b852a4..aeac6f35ca10 100644
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -198,8 +198,8 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
                 udelay(1);
 
         if (c > PWRDM_TRANSITION_BAILOUT) {
-                printk(KERN_ERR "powerdomain: waited too long for "
-                       "powerdomain %s to complete transition\n", pwrdm->name);
+                pr_err("powerdomain: %s: waited too long to complete transition\n",
+                       pwrdm->name);
                 return -EAGAIN;
         }
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 053e24ed3c48..d1dd1757264c 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -140,11 +140,11 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
                           MAX_MODULE_ENABLE_WAIT, i);
 
         if (i < MAX_MODULE_ENABLE_WAIT)
-                pr_debug("cm: Module associated with clock %s ready after %d "
-                         "loops\n", name, i);
+                pr_debug("cm: Module associated with clock %s ready after %d loops\n",
+                         name, i);
         else
-                pr_err("cm: Module associated with clock %s didn't enable in "
-                       "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+                pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
+                       name, MAX_MODULE_ENABLE_WAIT);
 
         return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
 };
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cc79d34c9f0..62763efb46a4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -229,9 +229,8 @@ static int __init omap_serial_early_init(void)
 
                         if (console_loglevel >= 10) {
                                 uart_debug = true;
-                                pr_info("%s used as console in debug mode"
-                                                " uart%d clocks will not be"
-                                                " gated", uart_name, uart->num);
+                                pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
+                                        uart_name, uart->num);
                         }
 
                         if (cmdline_find_option("no_console_suspend"))
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index d033a65f4e4e..cbeae56b56a9 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -104,16 +104,15 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
         sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
         if (!sr_data) {
-                pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
-                        __func__, oh->name);
+                pr_err("%s: Unable to allocate memory for %s sr_data\n",
+                       __func__, oh->name);
                 return -ENOMEM;
         }
 
         sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
         if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-                pr_err("%s: No voltage domain specified for %s."
-                                "Cannot initialize\n", __func__,
-                                        oh->name);
+                pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+                       __func__, oh->name);
                 goto exit;
         }
 
@@ -131,8 +130,8 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
         omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
         if (!volt_data) {
-                pr_warning("%s: No Voltage table registered fo VDD%d."
-                        "Something really wrong\n\n", __func__, i + 1);
+                pr_err("%s: No Voltage table registered for VDD%d\n",
+                       __func__, i + 1);
                 goto exit;
         }
 
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 84da34f9a7cf..4577764044b9 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -116,9 +116,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
         }
 
         if (!voltdm->pmic->uv_to_vsel) {
-                pr_err("%s: PMIC function to convert voltage in uV to"
-                        "vsel not registered. Hence unable to scale voltage"
-                        "for vdd_%s\n", __func__, voltdm->name);
+                pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n",
+                       __func__, voltdm->name);
                 return -ENODATA;
         }
 
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 4dc60e83e00d..3ac8fe1d8213 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -195,8 +195,8 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
                         return &voltdm->volt_data[i];
         }
 
-        pr_notice("%s: Unable to match the current voltage with the voltage"
-                "table for vdd_%s\n", __func__, voltdm->name);
+        pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n",
+                  __func__, voltdm->name);
 
         return ERR_PTR(-ENODATA);
 }
@@ -249,8 +249,8 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
                 voltdm->scale = omap_vc_bypass_scale;
                 return;
         default:
-                pr_warning("%s: Trying to change the method of voltage scaling"
-                        "to an unsupported one!\n", __func__);
+                pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n",
+                        __func__);
         }
 }
 
@@ -331,8 +331,8 @@ int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
         if (!voltdm || !pwrdm)
                 return -EINVAL;
 
-        pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
-                 "%s\n", pwrdm->name, voltdm->name);
+        pr_debug("voltagedomain: %s: associating powerdomain %s\n",
+                 voltdm->name, pwrdm->name);
 
         list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
 
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index f95c1bad9dc6..85241b828c02 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -138,8 +138,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
                 udelay(1);
         }
         if (timeout >= VP_TRANXDONE_TIMEOUT) {
-                pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
-                        "Voltage change aborted", __func__, voltdm->name);
+                pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted",
+                        __func__, voltdm->name);
                 return -ETIMEDOUT;
         }
 
@@ -157,9 +157,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
         omap_test_timeout(vp->common->ops->check_txdone(vp->id),
                           VP_TRANXDONE_TIMEOUT, timeout);
         if (timeout >= VP_TRANXDONE_TIMEOUT)
-                pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
-                        "TRANXDONE never got set after the voltage update\n",
-                        __func__, voltdm->name);
+                pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n",
+                       __func__, voltdm->name);
 
         omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
 
@@ -176,8 +175,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
         }
 
         if (timeout >= VP_TRANXDONE_TIMEOUT)
-                pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
-                        "to clear the TRANXDONE status\n",
+                pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n",
                         __func__, voltdm->name);
 
         /* Clear force bit */
@@ -257,8 +255,8 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 
         /* If VP is already disabled, do nothing. Return */
         if (!vp->enabled) {
-                pr_warning("%s: Trying to disable VP for vdd_%s when"
-                        "it is already disabled\n", __func__, voltdm->name);
+                pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n",
+                        __func__, voltdm->name);
                 return;
         }
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fe626761e53..4b3829ae5337 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -969,8 +969,7 @@ void omap_stop_dma(int lch)
                         l = p->dma_read(CCR, lch);
                 }
                 if (i >= 100)
-                        printk(KERN_ERR "DMA drain did not complete on "
-                                        "lch %d\n", lch);
+                        pr_err("DMA drain did not complete on lch %d\n", lch);
                 /* Restore OCP_SYSCONFIG */
                 p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
         } else {
@@ -1154,8 +1153,7 @@ void omap_dma_link_lch(int lch_head, int lch_queue)
 
         if ((dma_chan[lch_head].dev_id == -1) ||
             (dma_chan[lch_queue].dev_id == -1)) {
-                printk(KERN_ERR "omap_dma: trying to link "
-                       "non requested channels\n");
+                pr_err("omap_dma: trying to link non requested channels\n");
                 dump_stack();
         }
 
@@ -1181,15 +1179,13 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 
         if (dma_chan[lch_head].next_lch != lch_queue ||
             dma_chan[lch_head].next_lch == -1) {
-                printk(KERN_ERR "omap_dma: trying to unlink "
-                       "non linked channels\n");
+                pr_err("omap_dma: trying to unlink non linked channels\n");
                 dump_stack();
         }
 
         if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
             (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
-                printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
-                       "before unlinking\n");
+                pr_err("omap_dma: You need to stop the DMA channels before unlinking\n");
                 dump_stack();
         }
 
@@ -1831,16 +1827,15 @@ static int omap1_dma_handle_ch(int ch)
         if ((csr & 0x3f) == 0)
                 return 0;
         if (unlikely(dma_chan[ch].dev_id == -1)) {
-                printk(KERN_WARNING "Spurious interrupt from DMA channel "
-                       "%d (CSR %04x)\n", ch, csr);
+                pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+                        ch, csr);
                 return 0;
         }
         if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
-                printk(KERN_WARNING "DMA timeout with device %d\n",
-                       dma_chan[ch].dev_id);
+                pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
         if (unlikely(csr & OMAP_DMA_DROP_IRQ))
-                printk(KERN_WARNING "DMA synchronization event drop occurred "
-                       "with device %d\n", dma_chan[ch].dev_id);
+                pr_warn("DMA synchronization event drop occurred with device %d\n",
+                        dma_chan[ch].dev_id);
         if (likely(csr & OMAP_DMA_BLOCK_IRQ))
                 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
         if (likely(dma_chan[ch].callback != NULL))
@@ -1880,21 +1875,19 @@ static int omap2_dma_handle_ch(int ch)
 
         if (!status) {
                 if (printk_ratelimit())
-                        printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
-                                ch);
+                        pr_warn("Spurious DMA IRQ for lch %d\n", ch);
                 p->dma_write(1 << ch, IRQSTATUS_L0, ch);
                 return 0;
         }
         if (unlikely(dma_chan[ch].dev_id == -1)) {
                 if (printk_ratelimit())
-                        printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
-                                        "channel %d\n", status, ch);
+                        pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
+                                status, ch);
                 return 0;
         }
         if (unlikely(status & OMAP_DMA_DROP_IRQ))
-                printk(KERN_INFO
-                       "DMA synchronization event drop occurred with device "
-                       "%d\n", dma_chan[ch].dev_id);
+                pr_info("DMA synchronization event drop occurred with device %d\n",
+                        dma_chan[ch].dev_id);
         if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
                 printk(KERN_INFO "DMA transaction error with device %d\n",
                        dma_chan[ch].dev_id);
@@ -2014,8 +2007,9 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 
         p = pdev->dev.platform_data;
         if (!p) {
-                dev_err(&pdev->dev, "%s: System DMA initialized without"
-                        "platform data\n", __func__);
+                dev_err(&pdev->dev,
+                        "%s: System DMA initialized without platform data\n",
+                        __func__);
                 return -EINVAL;
         }
 
@@ -2090,8 +2084,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
                 }
                 ret = setup_irq(dma_irq, &omap24xx_dma_irq);
                 if (ret) {
-                        dev_err(&pdev->dev, "set_up failed for IRQ %d"
-                                "for DMA (error %d)\n", dma_irq, ret);
+                        dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
+                                dma_irq, ret);
                         goto exit_dma_lch_fail;
                 }
         }
@@ -2099,8 +2093,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
         /* reserve dma channels 0 and 1 in high security devices */
         if (cpu_is_omap34xx() &&
                 (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
-                printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
-                                "HS ROM code\n");
+                pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
                 dma_chan[0].dev_id = 0;
                 dma_chan[1].dev_id = 1;
         }
@@ -2108,8 +2101,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
         return 0;
 
 exit_dma_irq_fail:
-        dev_err(&pdev->dev, "unable to request IRQ %d"
-                        "for DMA (error %d)\n", dma_irq, ret);
+        dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
+                dma_irq, ret);
         for (irq_rel = 0; irq_rel < ch; irq_rel++) {
                 dma_irq = platform_get_irq(pdev, irq_rel);
                 free_irq(dma_irq, (void *)(irq_rel + 1));
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 5a97b4d98d41..9f6413324df9 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -41,11 +41,11 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
         };
 
         if (t == -1)
-                pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
-                         "dev %s\n", dev_name(dev));
+                pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
+                         dev_name(dev));
         else
-                pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
-                         "dev %s, t = %ld usec\n", dev_name(dev), t);
+                pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
+                         dev_name(dev), t);
 
         /*
          * For current Linux, this needs to map the MPU to a
@@ -70,11 +70,10 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
         };
 
         if (r == 0)
-                pr_debug("OMAP PM: remove min bus tput constraint: "
-                         "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+                pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
+                         dev_name(dev), agent_id);
         else
-                pr_debug("OMAP PM: add min bus tput constraint: "
-                         "dev %s for agent_id %d: rate %ld KiB\n",
+                pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
                          dev_name(dev), agent_id, r);
 
         /*
@@ -97,11 +96,11 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
         };
 
         if (t == -1)
-                pr_debug("OMAP PM: remove max device latency constraint: "
-                         "dev %s\n", dev_name(dev));
+                pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
+                         dev_name(dev));
         else
-                pr_debug("OMAP PM: add max device latency constraint: "
-                         "dev %s, t = %ld usec\n", dev_name(dev), t);
+                pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
+                         dev_name(dev), t);
 
         /*
          * For current Linux, this needs to map the device to a
@@ -127,11 +126,11 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t)
         };
 
         if (t == -1)
-                pr_debug("OMAP PM: remove max DMA latency constraint: "
-                         "dev %s\n", dev_name(dev));
+                pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
+                         dev_name(dev));
         else
-                pr_debug("OMAP PM: add max DMA latency constraint: "
-                         "dev %s, t = %ld usec\n", dev_name(dev), t);
+                pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
+                         dev_name(dev), t);
 
         /*
          * For current Linux PM QOS params, this code should scan the
@@ -156,11 +155,11 @@ int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
         }
 
         if (r == 0)
-                pr_debug("OMAP PM: remove min clk rate constraint: "
-                         "dev %s\n", dev_name(dev));
+                pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
+                         dev_name(dev));
         else
-                pr_debug("OMAP PM: add min clk rate constraint: "
-                         "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+                pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
+                         dev_name(dev), r);
 
         /*
          * Code in a real implementation should keep track of these
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c490240bb82c..b59edb065c70 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,4 +1,3 @@
-
 /*
  * omap_device implementation
  *
@@ -153,21 +152,19 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
                 act_lat = timespec_to_ns(&c);
 
                 dev_dbg(&od->pdev->dev,
-                        "omap_device: pm_lat %d: activate: elapsed time "
-                        "%llu nsec\n", od->pm_lat_level, act_lat);
+                        "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
+                        od->pm_lat_level, act_lat);
 
                 if (act_lat > odpl->activate_lat) {
                         odpl->activate_lat_worst = act_lat;
                         if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
                                 odpl->activate_lat = act_lat;
                                 dev_dbg(&od->pdev->dev,
-                                        "new worst case activate latency "
-                                        "%d: %llu\n",
+                                        "new worst case activate latency %d: %llu\n",
                                         od->pm_lat_level, act_lat);
                         } else
                                 dev_warn(&od->pdev->dev,
-                                         "activate latency %d "
-                                         "higher than exptected. (%llu > %d)\n",
+                                         "activate latency %d higher than expected. (%llu > %d)\n",
                                          od->pm_lat_level, act_lat,
                                          odpl->activate_lat);
                 }
@@ -220,21 +217,19 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
                 deact_lat = timespec_to_ns(&c);
 
                 dev_dbg(&od->pdev->dev,
-                        "omap_device: pm_lat %d: deactivate: elapsed time "
-                        "%llu nsec\n", od->pm_lat_level, deact_lat);
+                        "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
+                        od->pm_lat_level, deact_lat);
 
                 if (deact_lat > odpl->deactivate_lat) {
                         odpl->deactivate_lat_worst = deact_lat;
                         if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
                                 odpl->deactivate_lat = deact_lat;
                                 dev_dbg(&od->pdev->dev,
-                                        "new worst case deactivate latency "
-                                        "%d: %llu\n",
+                                        "new worst case deactivate latency %d: %llu\n",
                                         od->pm_lat_level, deact_lat);
                         } else
                                 dev_warn(&od->pdev->dev,
-                                         "deactivate latency %d "
-                                         "higher than exptected. (%llu > %d)\n",
+                                         "deactivate latency %d higher than expected. (%llu > %d)\n",
                                          od->pm_lat_level, deact_lat,
                                          odpl->deactivate_lat);
                 }
@@ -449,8 +444,8 @@ static int omap_device_count_resources(struct omap_device *od)
         for (i = 0; i < od->hwmods_cnt; i++)
                 c += omap_hwmod_count_resources(od->hwmods[i]);
 
-        pr_debug("omap_device: %s: counted %d total resources across %d "
-                 "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
+        pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
+                 od->pdev->name, c, od->hwmods_cnt);
 
         return c;
 }