diff options
-rw-r--r-- | Documentation/hwmon/max1668 | 60 | ||||
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/max1668.c | 480 |
5 files changed, 558 insertions, 0 deletions
diff --git a/Documentation/hwmon/max1668 b/Documentation/hwmon/max1668 new file mode 100644 index 000000000000..0616ed9758df --- /dev/null +++ b/Documentation/hwmon/max1668 | |||
@@ -0,0 +1,60 @@ | |||
1 | Kernel driver max1668 | ||
2 | ===================== | ||
3 | |||
4 | Supported chips: | ||
5 | * Maxim MAX1668, MAX1805 and MAX1989 | ||
6 | Prefix: 'max1668' | ||
7 | Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e | ||
8 | Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf | ||
9 | |||
10 | Author: | ||
11 | David George <david.george@ska.ac.za> | ||
12 | |||
13 | Description | ||
14 | ----------- | ||
15 | |||
16 | This driver implements support for the Maxim MAX1668, MAX1805 and MAX1989 | ||
17 | chips. | ||
18 | |||
19 | The three devices are very similar, but the MAX1805 has a reduced feature | ||
20 | set; only two remote temperature inputs vs the four avaible on the other | ||
21 | two ICs. | ||
22 | |||
23 | The driver is able to distinguish between the devices and creates sysfs | ||
24 | entries as follows: | ||
25 | |||
26 | MAX1805, MAX1668 and MAX1989: | ||
27 | |||
28 | temp1_input ro local (ambient) temperature | ||
29 | temp1_max rw local temperature maximum threshold for alarm | ||
30 | temp1_max_alarm ro local temperature maximum threshold alarm | ||
31 | temp1_min rw local temperature minimum threshold for alarm | ||
32 | temp1_min_alarm ro local temperature minimum threshold alarm | ||
33 | temp2_input ro remote temperature 1 | ||
34 | temp2_max rw remote temperature 1 maximum threshold for alarm | ||
35 | temp2_max_alarm ro remote temperature 1 maximum threshold alarm | ||
36 | temp2_min rw remote temperature 1 minimum threshold for alarm | ||
37 | temp2_min_alarm ro remote temperature 1 minimum threshold alarm | ||
38 | temp3_input ro remote temperature 2 | ||
39 | temp3_max rw remote temperature 2 maximum threshold for alarm | ||
40 | temp3_max_alarm ro remote temperature 2 maximum threshold alarm | ||
41 | temp3_min rw remote temperature 2 minimum threshold for alarm | ||
42 | temp3_min_alarm ro remote temperature 2 minimum threshold alarm | ||
43 | |||
44 | MAX1668 and MAX1989 only: | ||
45 | temp4_input ro remote temperature 3 | ||
46 | temp4_max rw remote temperature 3 maximum threshold for alarm | ||
47 | temp4_max_alarm ro remote temperature 3 maximum threshold alarm | ||
48 | temp4_min rw remote temperature 3 minimum threshold for alarm | ||
49 | temp4_min_alarm ro remote temperature 3 minimum threshold alarm | ||
50 | temp5_input ro remote temperature 4 | ||
51 | temp5_max rw remote temperature 4 maximum threshold for alarm | ||
52 | temp5_max_alarm ro remote temperature 4 maximum threshold alarm | ||
53 | temp5_min rw remote temperature 4 minimum threshold for alarm | ||
54 | temp5_min_alarm ro remote temperature 4 minimum threshold alarm | ||
55 | |||
56 | Module Parameters | ||
57 | ----------------- | ||
58 | |||
59 | * read_only: int | ||
60 | Set to non-zero if you wish to prevent write access to alarm thresholds. | ||
diff --git a/MAINTAINERS b/MAINTAINERS index 187282da9213..ccf1feb07ab2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS | |||
@@ -4120,6 +4120,13 @@ S: Orphan | |||
4120 | F: drivers/video/matrox/matroxfb_* | 4120 | F: drivers/video/matrox/matroxfb_* |
4121 | F: include/linux/matroxfb.h | 4121 | F: include/linux/matroxfb.h |
4122 | 4122 | ||
4123 | MAX1668 TEMPERATURE SENSOR DRIVER | ||
4124 | M: "David George" <david.george@ska.ac.za> | ||
4125 | L: lm-sensors@lm-sensors.org | ||
4126 | S: Maintained | ||
4127 | F: Documentation/hwmon/max1668 | ||
4128 | F: drivers/hwmon/max1668.c | ||
4129 | |||
4123 | MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER | 4130 | MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER |
4124 | M: "Hans J. Koch" <hjk@hansjkoch.de> | 4131 | M: "Hans J. Koch" <hjk@hansjkoch.de> |
4125 | L: lm-sensors@lm-sensors.org | 4132 | L: lm-sensors@lm-sensors.org |
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5f888f7e7dcb..dec5eee3542f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig | |||
@@ -736,6 +736,16 @@ config SENSORS_MAX1619 | |||
736 | This driver can also be built as a module. If so, the module | 736 | This driver can also be built as a module. If so, the module |
737 | will be called max1619. | 737 | will be called max1619. |
738 | 738 | ||
739 | config SENSORS_MAX1668 | ||
740 | tristate "Maxim MAX1668 and compatibles" | ||
741 | depends on I2C && EXPERIMENTAL | ||
742 | help | ||
743 | If you say yes here you get support for MAX1668, MAX1989 and | ||
744 | MAX1805 chips. | ||
745 | |||
746 | This driver can also be built as a module. If so, the module | ||
747 | will be called max1668. | ||
748 | |||
739 | config SENSORS_MAX6639 | 749 | config SENSORS_MAX6639 |
740 | tristate "Maxim MAX6639 sensor chip" | 750 | tristate "Maxim MAX6639 sensor chip" |
741 | depends on I2C && EXPERIMENTAL | 751 | depends on I2C && EXPERIMENTAL |
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 28061cfa0cdb..a6d519e568c0 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile | |||
@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o | |||
87 | obj-$(CONFIG_SENSORS_MAX1111) += max1111.o | 87 | obj-$(CONFIG_SENSORS_MAX1111) += max1111.o |
88 | obj-$(CONFIG_SENSORS_MAX16065) += max16065.o | 88 | obj-$(CONFIG_SENSORS_MAX16065) += max16065.o |
89 | obj-$(CONFIG_SENSORS_MAX1619) += max1619.o | 89 | obj-$(CONFIG_SENSORS_MAX1619) += max1619.o |
90 | obj-$(CONFIG_SENSORS_MAX1668) += max1668.o | ||
90 | obj-$(CONFIG_SENSORS_MAX6639) += max6639.o | 91 | obj-$(CONFIG_SENSORS_MAX6639) += max6639.o |
91 | obj-$(CONFIG_SENSORS_MAX6642) += max6642.o | 92 | obj-$(CONFIG_SENSORS_MAX6642) += max6642.o |
92 | obj-$(CONFIG_SENSORS_MAX6650) += max6650.o | 93 | obj-$(CONFIG_SENSORS_MAX6650) += max6650.o |
diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c new file mode 100644 index 000000000000..ddefb64b6ea2 --- /dev/null +++ b/drivers/hwmon/max1668.c | |||
@@ -0,0 +1,480 @@ | |||
1 | /* | ||
2 | Copyright (c) 2011 David George <david.george@ska.ac.za> | ||
3 | |||
4 | based on adm1021.c | ||
5 | some credit to Christoph Scheurer, but largely a rewrite | ||
6 | |||
7 | This program is free software; you can redistribute it and/or modify | ||
8 | it under the terms of the GNU General Public License as published by | ||
9 | the Free Software Foundation; either version 2 of the License, or | ||
10 | (at your option) any later version. | ||
11 | |||
12 | This program is distributed in the hope that it will be useful, | ||
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
15 | GNU General Public License for more details. | ||
16 | |||
17 | You should have received a copy of the GNU General Public License | ||
18 | along with this program; if not, write to the Free Software | ||
19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | ||
20 | */ | ||
21 | |||
22 | #include <linux/module.h> | ||
23 | #include <linux/init.h> | ||
24 | #include <linux/slab.h> | ||
25 | #include <linux/jiffies.h> | ||
26 | #include <linux/i2c.h> | ||
27 | #include <linux/hwmon.h> | ||
28 | #include <linux/hwmon-sysfs.h> | ||
29 | #include <linux/err.h> | ||
30 | #include <linux/mutex.h> | ||
31 | |||
32 | /* Addresses to scan */ | ||
33 | static unsigned short max1668_addr_list[] = { | ||
34 | 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; | ||
35 | |||
36 | /* max1668 registers */ | ||
37 | |||
38 | #define MAX1668_REG_TEMP(nr) (nr) | ||
39 | #define MAX1668_REG_STAT1 0x05 | ||
40 | #define MAX1668_REG_STAT2 0x06 | ||
41 | #define MAX1668_REG_MAN_ID 0xfe | ||
42 | #define MAX1668_REG_DEV_ID 0xff | ||
43 | |||
44 | /* limits */ | ||
45 | |||
46 | /* write high limits */ | ||
47 | #define MAX1668_REG_LIMH_WR(nr) (0x13 + 2 * (nr)) | ||
48 | /* write low limits */ | ||
49 | #define MAX1668_REG_LIML_WR(nr) (0x14 + 2 * (nr)) | ||
50 | /* read high limits */ | ||
51 | #define MAX1668_REG_LIMH_RD(nr) (0x08 + 2 * (nr)) | ||
52 | /* read low limits */ | ||
53 | #define MAX1668_REG_LIML_RD(nr) (0x09 + 2 * (nr)) | ||
54 | |||
55 | /* manufacturer and device ID Constants */ | ||
56 | #define MAN_ID_MAXIM 0x4d | ||
57 | #define DEV_ID_MAX1668 0x3 | ||
58 | #define DEV_ID_MAX1805 0x5 | ||
59 | #define DEV_ID_MAX1989 0xb | ||
60 | |||
61 | /* read only mode module parameter */ | ||
62 | static int read_only; | ||
63 | module_param(read_only, bool, 0); | ||
64 | MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); | ||
65 | |||
66 | enum chips { max1668, max1805, max1989 }; | ||
67 | |||
68 | struct max1668_data { | ||
69 | struct device *hwmon_dev; | ||
70 | enum chips type; | ||
71 | |||
72 | struct mutex update_lock; | ||
73 | char valid; /* !=0 if following fields are valid */ | ||
74 | unsigned long last_updated; /* In jiffies */ | ||
75 | |||
76 | /* 1x local and 4x remote */ | ||
77 | s8 temp_max[5]; | ||
78 | s8 temp_min[5]; | ||
79 | s8 temp[5]; | ||
80 | u16 alarms; | ||
81 | }; | ||
82 | |||
83 | static struct max1668_data *max1668_update_device(struct device *dev) | ||
84 | { | ||
85 | struct i2c_client *client = to_i2c_client(dev); | ||
86 | struct max1668_data *data = i2c_get_clientdata(client); | ||
87 | struct max1668_data *ret = data; | ||
88 | s32 val; | ||
89 | int i; | ||
90 | |||
91 | mutex_lock(&data->update_lock); | ||
92 | |||
93 | if (data->valid && !time_after(jiffies, | ||
94 | data->last_updated + HZ + HZ / 2)) | ||
95 | goto abort; | ||
96 | |||
97 | for (i = 0; i < 5; i++) { | ||
98 | val = i2c_smbus_read_byte_data(client, MAX1668_REG_TEMP(i)); | ||
99 | if (unlikely(val < 0)) { | ||
100 | ret = ERR_PTR(val); | ||
101 | goto abort; | ||
102 | } | ||
103 | data->temp[i] = (s8) val; | ||
104 | |||
105 | val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIMH_RD(i)); | ||
106 | if (unlikely(val < 0)) { | ||
107 | ret = ERR_PTR(val); | ||
108 | goto abort; | ||
109 | } | ||
110 | data->temp_max[i] = (s8) val; | ||
111 | |||
112 | val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIML_RD(i)); | ||
113 | if (unlikely(val < 0)) { | ||
114 | ret = ERR_PTR(val); | ||
115 | goto abort; | ||
116 | } | ||
117 | data->temp_min[i] = (s8) val; | ||
118 | } | ||
119 | |||
120 | val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT1); | ||
121 | if (unlikely(val < 0)) { | ||
122 | ret = ERR_PTR(val); | ||
123 | goto abort; | ||
124 | } | ||
125 | data->alarms &= 0x00ff; | ||
126 | data->alarms |= ((u8) (val & 0x60)) << 8; | ||
127 | |||
128 | val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT2); | ||
129 | if (unlikely(val < 0)) { | ||
130 | ret = ERR_PTR(val); | ||
131 | goto abort; | ||
132 | } | ||
133 | data->alarms &= 0xff00; | ||
134 | data->alarms |= ((u8) val); | ||
135 | |||
136 | data->last_updated = jiffies; | ||
137 | data->valid = 1; | ||
138 | abort: | ||
139 | mutex_unlock(&data->update_lock); | ||
140 | |||
141 | return ret; | ||
142 | } | ||
143 | |||
144 | static ssize_t show_temp(struct device *dev, | ||
145 | struct device_attribute *devattr, char *buf) | ||
146 | { | ||
147 | int index = to_sensor_dev_attr(devattr)->index; | ||
148 | struct max1668_data *data = max1668_update_device(dev); | ||
149 | |||
150 | if (IS_ERR(data)) | ||
151 | return PTR_ERR(data); | ||
152 | |||
153 | return sprintf(buf, "%d\n", data->temp[index] * 1000); | ||
154 | } | ||
155 | |||
156 | static ssize_t show_temp_max(struct device *dev, | ||
157 | struct device_attribute *devattr, char *buf) | ||
158 | { | ||
159 | int index = to_sensor_dev_attr(devattr)->index; | ||
160 | struct max1668_data *data = max1668_update_device(dev); | ||
161 | |||
162 | if (IS_ERR(data)) | ||
163 | return PTR_ERR(data); | ||
164 | |||
165 | return sprintf(buf, "%d\n", data->temp_max[index] * 1000); | ||
166 | } | ||
167 | |||
168 | static ssize_t show_temp_min(struct device *dev, | ||
169 | struct device_attribute *devattr, char *buf) | ||
170 | { | ||
171 | int index = to_sensor_dev_attr(devattr)->index; | ||
172 | struct max1668_data *data = max1668_update_device(dev); | ||
173 | |||
174 | if (IS_ERR(data)) | ||
175 | return PTR_ERR(data); | ||
176 | |||
177 | return sprintf(buf, "%d\n", data->temp_min[index] * 1000); | ||
178 | } | ||
179 | |||
180 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, | ||
181 | char *buf) | ||
182 | { | ||
183 | int index = to_sensor_dev_attr(attr)->index; | ||
184 | struct max1668_data *data = max1668_update_device(dev); | ||
185 | |||
186 | if (IS_ERR(data)) | ||
187 | return PTR_ERR(data); | ||
188 | |||
189 | return sprintf(buf, "%u\n", (data->alarms >> index) & 0x1); | ||
190 | } | ||
191 | |||
192 | static ssize_t set_temp_max(struct device *dev, | ||
193 | struct device_attribute *devattr, | ||
194 | const char *buf, size_t count) | ||
195 | { | ||
196 | int index = to_sensor_dev_attr(devattr)->index; | ||
197 | struct i2c_client *client = to_i2c_client(dev); | ||
198 | struct max1668_data *data = i2c_get_clientdata(client); | ||
199 | long temp; | ||
200 | int ret; | ||
201 | |||
202 | ret = kstrtol(buf, 10, &temp); | ||
203 | if (ret < 0) | ||
204 | return ret; | ||
205 | |||
206 | mutex_lock(&data->update_lock); | ||
207 | data->temp_max[index] = SENSORS_LIMIT(temp/1000, -128, 127); | ||
208 | if (i2c_smbus_write_byte_data(client, | ||
209 | MAX1668_REG_LIMH_WR(index), | ||
210 | data->temp_max[index])) | ||
211 | count = -EIO; | ||
212 | mutex_unlock(&data->update_lock); | ||
213 | |||
214 | return count; | ||
215 | } | ||
216 | |||
217 | static ssize_t set_temp_min(struct device *dev, | ||
218 | struct device_attribute *devattr, | ||
219 | const char *buf, size_t count) | ||
220 | { | ||
221 | int index = to_sensor_dev_attr(devattr)->index; | ||
222 | struct i2c_client *client = to_i2c_client(dev); | ||
223 | struct max1668_data *data = i2c_get_clientdata(client); | ||
224 | long temp; | ||
225 | int ret; | ||
226 | |||
227 | ret = kstrtol(buf, 10, &temp); | ||
228 | if (ret < 0) | ||
229 | return ret; | ||
230 | |||
231 | mutex_lock(&data->update_lock); | ||
232 | data->temp_min[index] = SENSORS_LIMIT(temp/1000, -128, 127); | ||
233 | if (i2c_smbus_write_byte_data(client, | ||
234 | MAX1668_REG_LIML_WR(index), | ||
235 | data->temp_max[index])) | ||
236 | count = -EIO; | ||
237 | mutex_unlock(&data->update_lock); | ||
238 | |||
239 | return count; | ||
240 | } | ||
241 | |||
242 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | ||
243 | static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, | ||
244 | set_temp_max, 0); | ||
245 | static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, | ||
246 | set_temp_min, 0); | ||
247 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); | ||
248 | static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, | ||
249 | set_temp_max, 1); | ||
250 | static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp_min, | ||
251 | set_temp_min, 1); | ||
252 | static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); | ||
253 | static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, | ||
254 | set_temp_max, 2); | ||
255 | static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp_min, | ||
256 | set_temp_min, 2); | ||
257 | static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); | ||
258 | static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, | ||
259 | set_temp_max, 3); | ||
260 | static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO, show_temp_min, | ||
261 | set_temp_min, 3); | ||
262 | static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4); | ||
263 | static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, | ||
264 | set_temp_max, 4); | ||
265 | static SENSOR_DEVICE_ATTR(temp5_min, S_IRUGO, show_temp_min, | ||
266 | set_temp_min, 4); | ||
267 | |||
268 | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 14); | ||
269 | static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 13); | ||
270 | static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 7); | ||
271 | static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 6); | ||
272 | static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 5); | ||
273 | static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4); | ||
274 | static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_alarm, NULL, 3); | ||
275 | static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 2); | ||
276 | static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO, show_alarm, NULL, 1); | ||
277 | static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, 0); | ||
278 | |||
279 | /* Attributes common to MAX1668, MAX1989 and MAX1805 */ | ||
280 | static struct attribute *max1668_attribute_common[] = { | ||
281 | &sensor_dev_attr_temp1_max.dev_attr.attr, | ||
282 | &sensor_dev_attr_temp1_min.dev_attr.attr, | ||
283 | &sensor_dev_attr_temp1_input.dev_attr.attr, | ||
284 | &sensor_dev_attr_temp2_max.dev_attr.attr, | ||
285 | &sensor_dev_attr_temp2_min.dev_attr.attr, | ||
286 | &sensor_dev_attr_temp2_input.dev_attr.attr, | ||
287 | &sensor_dev_attr_temp3_max.dev_attr.attr, | ||
288 | &sensor_dev_attr_temp3_min.dev_attr.attr, | ||
289 | &sensor_dev_attr_temp3_input.dev_attr.attr, | ||
290 | |||
291 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | ||
292 | &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, | ||
293 | &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | ||
294 | &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, | ||
295 | &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, | ||
296 | &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, | ||
297 | NULL | ||
298 | }; | ||
299 | |||
300 | /* Attributes not present on MAX1805 */ | ||
301 | static struct attribute *max1668_attribute_unique[] = { | ||
302 | &sensor_dev_attr_temp4_max.dev_attr.attr, | ||
303 | &sensor_dev_attr_temp4_min.dev_attr.attr, | ||
304 | &sensor_dev_attr_temp4_input.dev_attr.attr, | ||
305 | &sensor_dev_attr_temp5_max.dev_attr.attr, | ||
306 | &sensor_dev_attr_temp5_min.dev_attr.attr, | ||
307 | &sensor_dev_attr_temp5_input.dev_attr.attr, | ||
308 | |||
309 | &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, | ||
310 | &sensor_dev_attr_temp4_min_alarm.dev_attr.attr, | ||
311 | &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, | ||
312 | &sensor_dev_attr_temp5_min_alarm.dev_attr.attr, | ||
313 | NULL | ||
314 | }; | ||
315 | |||
316 | static mode_t max1668_attribute_mode(struct kobject *kobj, | ||
317 | struct attribute *attr, int index) | ||
318 | { | ||
319 | int ret = S_IRUGO; | ||
320 | if (read_only) | ||
321 | return ret; | ||
322 | if (attr == &sensor_dev_attr_temp1_max.dev_attr.attr || | ||
323 | attr == &sensor_dev_attr_temp2_max.dev_attr.attr || | ||
324 | attr == &sensor_dev_attr_temp3_max.dev_attr.attr || | ||
325 | attr == &sensor_dev_attr_temp4_max.dev_attr.attr || | ||
326 | attr == &sensor_dev_attr_temp5_max.dev_attr.attr || | ||
327 | attr == &sensor_dev_attr_temp1_min.dev_attr.attr || | ||
328 | attr == &sensor_dev_attr_temp2_min.dev_attr.attr || | ||
329 | attr == &sensor_dev_attr_temp3_min.dev_attr.attr || | ||
330 | attr == &sensor_dev_attr_temp4_min.dev_attr.attr || | ||
331 | attr == &sensor_dev_attr_temp5_min.dev_attr.attr) | ||
332 | ret |= S_IWUSR; | ||
333 | return ret; | ||
334 | } | ||
335 | |||
336 | static const struct attribute_group max1668_group_common = { | ||
337 | .attrs = max1668_attribute_common, | ||
338 | .is_visible = max1668_attribute_mode | ||
339 | }; | ||
340 | |||
341 | static const struct attribute_group max1668_group_unique = { | ||
342 | .attrs = max1668_attribute_unique, | ||
343 | .is_visible = max1668_attribute_mode | ||
344 | }; | ||
345 | |||
346 | /* Return 0 if detection is successful, -ENODEV otherwise */ | ||
347 | static int max1668_detect(struct i2c_client *client, | ||
348 | struct i2c_board_info *info) | ||
349 | { | ||
350 | struct i2c_adapter *adapter = client->adapter; | ||
351 | const char *type_name; | ||
352 | int man_id, dev_id; | ||
353 | |||
354 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | ||
355 | return -ENODEV; | ||
356 | |||
357 | /* Check for unsupported part */ | ||
358 | man_id = i2c_smbus_read_byte_data(client, MAX1668_REG_MAN_ID); | ||
359 | if (man_id != MAN_ID_MAXIM) | ||
360 | return -ENODEV; | ||
361 | |||
362 | dev_id = i2c_smbus_read_byte_data(client, MAX1668_REG_DEV_ID); | ||
363 | if (dev_id < 0) | ||
364 | return -ENODEV; | ||
365 | |||
366 | type_name = NULL; | ||
367 | if (dev_id == DEV_ID_MAX1668) | ||
368 | type_name = "max1668"; | ||
369 | else if (dev_id == DEV_ID_MAX1805) | ||
370 | type_name = "max1805"; | ||
371 | else if (dev_id == DEV_ID_MAX1989) | ||
372 | type_name = "max1989"; | ||
373 | |||
374 | if (!type_name) | ||
375 | return -ENODEV; | ||
376 | |||
377 | strlcpy(info->type, type_name, I2C_NAME_SIZE); | ||
378 | |||
379 | return 0; | ||
380 | } | ||
381 | |||
382 | static int max1668_probe(struct i2c_client *client, | ||
383 | const struct i2c_device_id *id) | ||
384 | { | ||
385 | struct i2c_adapter *adapter = client->adapter; | ||
386 | struct max1668_data *data; | ||
387 | int err; | ||
388 | |||
389 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | ||
390 | return -ENODEV; | ||
391 | |||
392 | data = kzalloc(sizeof(struct max1668_data), GFP_KERNEL); | ||
393 | if (!data) | ||
394 | return -ENOMEM; | ||
395 | |||
396 | i2c_set_clientdata(client, data); | ||
397 | data->type = id->driver_data; | ||
398 | mutex_init(&data->update_lock); | ||
399 | |||
400 | /* Register sysfs hooks */ | ||
401 | err = sysfs_create_group(&client->dev.kobj, &max1668_group_common); | ||
402 | if (err) | ||
403 | goto error_free; | ||
404 | |||
405 | if (data->type == max1668 || data->type == max1989) { | ||
406 | err = sysfs_create_group(&client->dev.kobj, | ||
407 | &max1668_group_unique); | ||
408 | if (err) | ||
409 | goto error_sysrem0; | ||
410 | } | ||
411 | |||
412 | data->hwmon_dev = hwmon_device_register(&client->dev); | ||
413 | if (IS_ERR(data->hwmon_dev)) { | ||
414 | err = PTR_ERR(data->hwmon_dev); | ||
415 | goto error_sysrem1; | ||
416 | } | ||
417 | |||
418 | return 0; | ||
419 | |||
420 | error_sysrem1: | ||
421 | if (data->type == max1668 || data->type == max1989) | ||
422 | sysfs_remove_group(&client->dev.kobj, &max1668_group_unique); | ||
423 | error_sysrem0: | ||
424 | sysfs_remove_group(&client->dev.kobj, &max1668_group_common); | ||
425 | error_free: | ||
426 | kfree(data); | ||
427 | return err; | ||
428 | } | ||
429 | |||
430 | static int max1668_remove(struct i2c_client *client) | ||
431 | { | ||
432 | struct max1668_data *data = i2c_get_clientdata(client); | ||
433 | |||
434 | hwmon_device_unregister(data->hwmon_dev); | ||
435 | if (data->type == max1668 || data->type == max1989) | ||
436 | sysfs_remove_group(&client->dev.kobj, &max1668_group_unique); | ||
437 | |||
438 | sysfs_remove_group(&client->dev.kobj, &max1668_group_common); | ||
439 | |||
440 | kfree(data); | ||
441 | return 0; | ||
442 | } | ||
443 | |||
444 | static const struct i2c_device_id max1668_id[] = { | ||
445 | { "max1668", max1668 }, | ||
446 | { "max1805", max1805 }, | ||
447 | { "max1989", max1989 }, | ||
448 | { } | ||
449 | }; | ||
450 | MODULE_DEVICE_TABLE(i2c, max1668_id); | ||
451 | |||
452 | /* This is the driver that will be inserted */ | ||
453 | static struct i2c_driver max1668_driver = { | ||
454 | .class = I2C_CLASS_HWMON, | ||
455 | .driver = { | ||
456 | .name = "max1668", | ||
457 | }, | ||
458 | .probe = max1668_probe, | ||
459 | .remove = max1668_remove, | ||
460 | .id_table = max1668_id, | ||
461 | .detect = max1668_detect, | ||
462 | .address_list = max1668_addr_list, | ||
463 | }; | ||
464 | |||
465 | static int __init sensors_max1668_init(void) | ||
466 | { | ||
467 | return i2c_add_driver(&max1668_driver); | ||
468 | } | ||
469 | |||
470 | static void __exit sensors_max1668_exit(void) | ||
471 | { | ||
472 | i2c_del_driver(&max1668_driver); | ||
473 | } | ||
474 | |||
475 | MODULE_AUTHOR("David George <david.george@ska.ac.za>"); | ||
476 | MODULE_DESCRIPTION("MAX1668 remote temperature sensor driver"); | ||
477 | MODULE_LICENSE("GPL"); | ||
478 | |||
479 | module_init(sensors_max1668_init) | ||
480 | module_exit(sensors_max1668_exit) | ||