62 files changed, 3 insertions, 2732 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1619cf2c9ff0..a00fabe2e4e0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -266,25 +266,6 @@ config MOMENCO_OCELOT
          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
          Momentum Computer <http://www.momenco.com/>.
-config MOMENCO_OCELOT_3
-        bool "Momentum Ocelot-3 board"
-        select BOOT_ELF32
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
-        select IRQ_CPU
-        select IRQ_CPU_RM7K
-        select IRQ_MV64340
-        select PCI_MARVELL
-        select RM7000_CPU_SCACHE
-        select SWAP_IO_SPACE
-        select SYS_HAS_CPU_RM9000
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
-        select SYS_SUPPORTS_BIG_ENDIAN
-        help
-          The Ocelot-3 is based off Discovery III System Controller and
-          PMC-Sierra Rm79000 core.
 config PNX8550_JBS
        bool "Philips PNX8550 based JBS board"
        select PNX8550
@@ -826,9 +807,6 @@ config IRQ_MSP_SLP
 config IRQ_MSP_CIC
        bool
-config IRQ_MV64340
-        bool
 config DDB5XXX_COMMON
        bool
        select SYS_SUPPORTS_KGDB
@@ -850,9 +828,6 @@ config MIPS_RM9122
        bool
        select SERIAL_RM9000
-config PCI_MARVELL
-        bool
 config PNX8550
        bool
        select SOC_PNX8550
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 0c270b6ee24c..20d19c9b7761 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -365,13 +365,6 @@ cflags-$(CONFIG_QEMU)		+= -Iinclude/asm-mips/mach-qemu
 load-$(CONFIG_QEMU)             += 0xffffffff80010000
 #
-# Momentum Ocelot-3
-#
-core-$(CONFIG_MOMENCO_OCELOT_3)         += arch/mips/momentum/ocelot_3/
-cflags-$(CONFIG_MOMENCO_OCELOT_3)       += -Iinclude/asm-mips/mach-ocelot3
-load-$(CONFIG_MOMENCO_OCELOT_3)         += 0xffffffff80100000
-#
 # Basler eXcite
 #
 core-$(CONFIG_BASLER_EXCITE)    += arch/mips/basler/excite/
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 6480571de944..129e2c961fec 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -33,7 +33,6 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 9c75795cba08..dc3e1bf4e42e 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 0152730fb4d1..4c7031222e64 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 521311ad9528..c8c05785a86d 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -19,7 +19,6 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index f3b0bc7abb56..ec60beb888b2 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index b9ebb301a523..f3c25f08bfad 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index cfebcca2f938..6d400befbacc 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 213ef385ff09..82aea6e08823 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index aa40611fb00b..82697714a9e3 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index 1f4acce27659..a42ab9ae7d4b 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index a08b99a0379d..d6e3fffbc80d 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -33,7 +33,6 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 938da2d7b19d..78f5004fb721 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index dab9aba49487..b29bff0f56c3 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index a828c04d1afe..69810592aa6b 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -34,7 +34,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index f15559fa578d..6ab94d8cf08b 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -20,7 +20,6 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index cc0530ef33f2..405c9f505a77 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 482f2fa120df..a9dcbcf563cb 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index f9f58d0906ba..a040459bec11 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index bc4e30fe4e22..dd04eece9fd3 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -33,7 +33,6 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index baa1736c21cd..9a25e770abd8 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index d8ee7c28c83b..546cb243fd09 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -33,7 +33,6 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index fc8a42477840..bc3246b2c808 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 CONFIG_MIPS_SIM=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 2da27ece70c7..4981ce425d82 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index cb2aeb20721e..adca5f7ba533 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
deleted file mode 100644
index 20946b8141a3..000000000000
--- a/arch/mips/configs/ocelot_3_defconfig
+++ /dev/null
@@ -1,1280 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:35 2007
-#
-CONFIG_MIPS=y
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-CONFIG_MOMENCO_OCELOT_3=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_MV64340=y
-CONFIG_PCI_MARVELL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-CONFIG_IPV6_MIP6=y
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-#
-# SCSI low-level drivers
-#
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-#
-# LED drivers
-#
-#
-# LED Triggers
-#
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-#
-# DMA Clients
-#
-#
-# DMA Devices
-#
-#
-# Auxiliary Display support
-#
-#
-# Virtualization
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EFS_FS=y
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="ip=any root=nfs"
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 492c9abfd943..e1db1fb80cd0 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 22fb01bc6a7a..0028aef0af9d 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index b0abaef4ce56..8a1d5888739c 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index ddb173ae50ea..5581ad2ca411 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -34,7 +34,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 2c2a8c8dca69..821c1cee5639 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_PNX8550_JBS=y
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index b435d63deab9..0e8bd92b38cf 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index cfe1f5a0a20f..6cca105832ca 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig
index 76b939fad78e..20a38526d483 100644
--- a/arch/mips/configs/rbhma4200_defconfig
+++ b/arch/mips/configs/rbhma4200_defconfig
@@ -31,7 +31,6 @@ CONFIG_MIPS=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index 2c9e7e493a1b..5dbb250f71c7 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -21,7 +21,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 9d731409c730..1a67a85aabbb 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 55fa6731c111..98a914092258 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index f80c61a54653..69c08b24c82a 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -33,7 +33,6 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index d5e4e3e3769b..5d4fc0e4f729 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 8743f6dfd7ed..1b92b48de051 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index eab47f2ac829..5b77c7a5d83a 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index d32e4cd55ee4..94a4f94a8b24 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 95986e37382c..e38bd9b0eadc 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -33,7 +33,6 @@ CONFIG_WR_PPMC=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index c1e5a128cfa6..f1cdb12f7925 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index bf18baf2fbc2..b3b6e58058f6 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -33,7 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 4b40015a66d2..961594cb5214 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -49,7 +49,6 @@ obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)           += irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)      += irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)      += irq-rm9000.o
-obj-$(CONFIG_IRQ_MV64340)       += irq-mv6434x.o
 obj-$(CONFIG_MIPS_BOARDS_GEN)   += irq-msc01.o
 obj-$(CONFIG_32BIT)             += scall32-o32.o
diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c
deleted file mode 100644
index 3dd561832e4c..000000000000
--- a/arch/mips/kernel/irq-mv6434x.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- * Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/mv643xx.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/marvell.h>
-static unsigned int irq_base;
-static inline int ls1bit32(unsigned int x)
-{
-        int b = 31, s;
-        s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-        s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-        s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-        s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-        s =  1; if (x <<  1 == 0) s = 0; b -= s;
-        return b;
-}
-/* mask off an interrupt -- 1 is enable, 0 is disable */
-static inline void mask_mv64340_irq(unsigned int irq)
-{
-        uint32_t value;
-        if (irq < (irq_base + 32)) {
-                value = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW);
-                value &= ~(1 << (irq - irq_base));
-                MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
-        } else {
-                value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-                value &= ~(1 << (irq - irq_base - 32));
-                MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
-        }
-}
-/* unmask an interrupt -- 1 is enable, 0 is disable */
-static inline void unmask_mv64340_irq(unsigned int irq)
-{
-        uint32_t value;
-        if (irq < (irq_base + 32)) {
-                value = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW);
-                value |= 1 << (irq - irq_base);
-                MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
-        } else {
-                value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-                value |= 1 << (irq - irq_base - 32);
-                MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
-        }
-}
-/*
- * Interrupt handler for interrupts coming from the Marvell chip.
- * It could be built in ethernet ports etc...
- */
-void ll_mv64340_irq(void)
-{
-        unsigned int irq_src_low, irq_src_high;
-        unsigned int irq_mask_low, irq_mask_high;
-        /* read the interrupt status registers */
-        irq_mask_low = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW);
-        irq_mask_high = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-        irq_src_low = MV_READ(MV64340_MAIN_INTERRUPT_CAUSE_LOW);
-        irq_src_high = MV_READ(MV64340_MAIN_INTERRUPT_CAUSE_HIGH);
-        /* mask for just the interrupts we want */
-        irq_src_low &= irq_mask_low;
-        irq_src_high &= irq_mask_high;
-        if (irq_src_low)
-                do_IRQ(ls1bit32(irq_src_low) + irq_base);
-        else
-                do_IRQ(ls1bit32(irq_src_high) + irq_base + 32);
-}
-struct irq_chip mv64340_irq_type = {
-        .name = "MV-64340",
-        .ack = mask_mv64340_irq,
-        .mask = mask_mv64340_irq,
-        .mask_ack = mask_mv64340_irq,
-        .unmask = unmask_mv64340_irq,
-};
-void __init mv64340_irq_init(unsigned int base)
-{
-        int i;
-        for (i = base; i < base + 64; i++)
-                set_irq_chip_and_handler(i, &mv64340_irq_type,
-                                         handle_level_irq);
-        irq_base = base;
-}
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile
deleted file mode 100644
index d5a090a85a15..000000000000
--- a/arch/mips/momentum/ocelot_3/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Momentum Computer's Ocelot-3 board.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-obj-y    += irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c
deleted file mode 100644
index 3862d1d1add4..000000000000
--- a/arch/mips/momentum/ocelot_3/irq.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright 2004 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Copyright (C) 2004 MontaVista Software Inc.
- *  Author: Manish Lachwani, mlachwani@mvista.com
- *
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <asm/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-static struct irqaction cascade_mv64340 = {
-        no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
-};
-void __init arch_init_irq(void)
-{
-        /*
-         * Clear all of the interrupts while we change the able around a bit.
-         * int-handler is not on bootstrap
-         */
-        clear_c0_status(ST0_IM | ST0_BEV);
-        rm7k_cpu_irq_init();
-        /* set up the cascading interrupts */
-        setup_irq(8, &cascade_mv64340);         /* unmask intControl IM8, IRQ 9 */
-        mv64340_irq_init(16);
-        set_c0_status(ST0_IM); /* IE in the status register */
-}
-asmlinkage void plat_irq_dispatch(void)
-{
-        unsigned int pending = read_c0_cause() & read_c0_status();
-        if (pending & STATUSF_IP0)
-                do_IRQ(0);
-        else if (pending & STATUSF_IP1)
-                do_IRQ(1);
-        else if (pending & STATUSF_IP2)
-                do_IRQ(2);
-        else if (pending & STATUSF_IP3)
-                do_IRQ(3);
-        else if (pending & STATUSF_IP4)
-                do_IRQ(4);
-        else if (pending & STATUSF_IP5)
-                do_IRQ(5);
-        else if (pending & STATUSF_IP6)
-                do_IRQ(6);
-        else if (pending & STATUSF_IP7)
-                do_IRQ(7);
-        else {
-                /*
-                 * Now look at the extended interrupts
-                 */
-                pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
-                if (pending & STATUSF_IP8)
-                        ll_mv64340_irq();
-                else
-                        spurious_interrupt();
-        }
-}
diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
deleted file mode 100644
index 5710a9029f1c..000000000000
--- a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Ocelot-3 Board Register Definitions
- *
- * (C) 2002 Momentum Computer Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Louis Hamilton, Red Hat, Inc.
- *    hamilton@redhat.com  [MIPS64 modifications]
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- */
-#ifndef __OCELOT_3_FPGA_H__
-#define __OCELOT_3_FPGA_H__
-#define OCELOT_3_REG_BOARDREV           0x0
-#define OCELOT_3_REG_FPGA_REV           0x1
-#define OCELOT_3_REG_FPGA_TYPE          0x2
-#define OCELOT_3_REG_RESET_STATUS       0x3
-#define OCELOT_3_REG_BOARD_STATUS       0x4
-#define OCELOT_3_REG_CPCI_ID            0x5
-#define OCELOT_3_REG_SET                0x6
-#define OCELOT_3_REG_CLR                0x7
-#define OCELOT_3_REG_EEPROM_MODE        0x9
-#define OCELOT_3_REG_INTMASK            0xa
-#define OCELOT_3_REG_INTSTAT            0xb
-#define OCELOT_3_REG_UART_INTMASK       0xc
-#define OCELOT_3_REG_UART_INTSTAT       0xd
-#define OCELOT_3_REG_INTSET             0xe
-#define OCELOT_3_REG_INTCLR             0xf
-extern unsigned long ocelot_fpga_base;
-#define __FPGA_REG_TO_ADDR(reg)                                         \
-        ((void *) ocelot_fpga_base + OCELOT_3_REG_##reg)
-#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
-#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
-#endif
diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c
deleted file mode 100644
index cb63c82ef650..000000000000
--- a/arch/mips/momentum/ocelot_3/platform.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2007 Dale Farnsworth (dale@farnsworth.org)
- */
-#include <linux/delay.h>
-#include <linux/if_ether.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include "ocelot_3_fpga.h"
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-static struct resource mv643xx_eth_shared_resources[] = {
-        [0] = {
-                .name   = "ethernet shared base",
-                .start  = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
-                .end    = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
-                                       MV643XX_ETH_SHARED_REGS_SIZE - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-static struct platform_device mv643xx_eth_shared_device = {
-        .name           = MV643XX_ETH_SHARED_NAME,
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(mv643xx_eth_shared_resources),
-        .resource       = mv643xx_eth_shared_resources,
-};
-#define MV_SRAM_BASE                    0xfe000000UL
-#define MV_SRAM_SIZE                    (256 * 1024)
-#define MV_SRAM_RXRING_SIZE             (MV_SRAM_SIZE / 4)
-#define MV_SRAM_TXRING_SIZE             (MV_SRAM_SIZE / 4)
-#define MV_SRAM_BASE_ETH0               MV_SRAM_BASE
-#define MV_SRAM_BASE_ETH1               (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
-#define MV64x60_IRQ_ETH_0 48
-#define MV64x60_IRQ_ETH_1 49
-#define MV64x60_IRQ_ETH_2 50
-static struct resource mv64x60_eth0_resources[] = {
-        [0] = {
-                .name   = "eth0 irq",
-                .start  = MV64x60_IRQ_ETH_0,
-                .end    = MV64x60_IRQ_ETH_0,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-static struct mv643xx_eth_platform_data eth0_pd = {
-        .port_number    = 0,
-        .tx_sram_addr   = MV_SRAM_BASE_ETH0,
-        .tx_sram_size   = MV_SRAM_TXRING_SIZE,
-        .tx_queue_size  = MV_SRAM_TXRING_SIZE / 16,
-        .rx_sram_addr   = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
-        .rx_sram_size   = MV_SRAM_RXRING_SIZE,
-        .rx_queue_size  = MV_SRAM_RXRING_SIZE / 16,
-};
-static struct platform_device eth0_device = {
-        .name           = MV643XX_ETH_NAME,
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(mv64x60_eth0_resources),
-        .resource       = mv64x60_eth0_resources,
-        .dev = {
-                .platform_data = &eth0_pd,
-        },
-};
-static struct resource mv64x60_eth1_resources[] = {
-        [0] = {
-                .name   = "eth1 irq",
-                .start  = MV64x60_IRQ_ETH_1,
-                .end    = MV64x60_IRQ_ETH_1,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-static struct mv643xx_eth_platform_data eth1_pd = {
-        .port_number    = 1,
-        .tx_sram_addr   = MV_SRAM_BASE_ETH1,
-        .tx_sram_size   = MV_SRAM_TXRING_SIZE,
-        .tx_queue_size  = MV_SRAM_TXRING_SIZE / 16,
-        .rx_sram_addr   = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
-        .rx_sram_size   = MV_SRAM_RXRING_SIZE,
-        .rx_queue_size  = MV_SRAM_RXRING_SIZE / 16,
-};
-static struct platform_device eth1_device = {
-        .name           = MV643XX_ETH_NAME,
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(mv64x60_eth1_resources),
-        .resource       = mv64x60_eth1_resources,
-        .dev = {
-                .platform_data = &eth1_pd,
-        },
-};
-static struct resource mv64x60_eth2_resources[] = {
-        [0] = {
-                .name   = "eth2 irq",
-                .start  = MV64x60_IRQ_ETH_2,
-                .end    = MV64x60_IRQ_ETH_2,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-static struct mv643xx_eth_platform_data eth2_pd = {
-        .port_number    = 2,
-};
-static struct platform_device eth2_device = {
-        .name           = MV643XX_ETH_NAME,
-        .id             = 2,
-        .num_resources  = ARRAY_SIZE(mv64x60_eth2_resources),
-        .resource       = mv64x60_eth2_resources,
-        .dev = {
-                .platform_data = &eth2_pd,
-        },
-};
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
-        &mv643xx_eth_shared_device,
-        &eth0_device,
-        &eth1_device,
-        &eth2_device,
-};
-static u8 __init exchange_bit(u8 val, u8 cs)
-{
-        /* place the data */
-        OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
-        udelay(1);
-        /* turn the clock on */
-        OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
-        udelay(1);
-        /* turn the clock off and read-strobe */
-        OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-        /* return the data */
-        return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
-}
-static void __init get_mac(char dest[6])
-{
-        u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-        int i,j;
-        for (i = 0; i < 12; i++)
-                exchange_bit(read_opcode[i], 1);
-        for (j = 0; j < 6; j++) {
-                dest[j] = 0;
-                for (i = 0; i < 8; i++) {
-                        dest[j] <<= 1;
-                        dest[j] |= exchange_bit(0, 1);
-                }
-        }
-        /* turn off CS */
-        exchange_bit(0,0);
-}
-/*
- * Copy and increment ethernet MAC address by a small value.
- *
- * This is useful for systems where the only one MAC address is stored in
- * non-volatile memory for multiple ports.
- */
-static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
-        unsigned int add)
-{
-        int i;
-        BUG_ON(add >= 256);
-        for (i = ETH_ALEN; i >= 0; i--) {
-                dst[i] = src[i] + add;
-                add = dst[i] < src[i];          /* compute carry */
-        }
-        WARN_ON(add);
-}
-static int __init mv643xx_eth_add_pds(void)
-{
-        unsigned char mac[ETH_ALEN];
-        int ret;
-        get_mac(mac);
-        eth_mac_add(eth0_pd.mac_addr, mac, 0);
-        eth_mac_add(eth1_pd.mac_addr, mac, 1);
-        eth_mac_add(eth2_pd.mac_addr, mac, 2);
-        ret = platform_add_devices(mv643xx_eth_pd_devs,
-                        ARRAY_SIZE(mv643xx_eth_pd_devs));
-        return ret;
-}
-device_initcall(mv643xx_eth_add_pds);
-#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
-#define OCELOT3_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-static struct plat_serial8250_port uart8250_data[] = {
-        {
-                .membase        = (signed long) 0xfd000020,
-                .irq            = 6,
-                .uartclk        = 20000000,
-                .iotype         = UPIO_MEM,
-                .flags          = OCELOT3_UART_FLAGS,
-                .regshift       = 2,
-        },
-        { },
-};
-static struct platform_device uart8250_device = {
-        .name                   = "serial8250",
-        .id                     = PLAT8250_DEV_PLATFORM,
-        .dev                    = {
-                .platform_data  = uart8250_data,
-        },
-};
-static int __init uart8250_init(void)
-{
-        return platform_device_register(&uart8250_device);
-}
-module_init(uart8250_init);
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Ocelot 3");
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
deleted file mode 100644
index 8e02df63578a..000000000000
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Copyright 2004 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- */
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/mv643xx.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-#include "ocelot_3_fpga.h"
-struct callvectors* debug_vectors;
-extern unsigned long marvell_base;
-extern unsigned long cpu_clock;
-const char *get_system_type(void)
-{
-        return "Momentum Ocelot-3";
-}
-#ifdef CONFIG_64BIT
-unsigned long signext(unsigned long addr)
-{
-        addr &= 0xffffffff;
-        return (unsigned long)((int)addr);
-}
-void *get_arg(unsigned long args, int arc)
-{
-        unsigned long ul;
-        unsigned char *puc, uc;
-        args += (arc * 4);
-        ul = (unsigned long)signext(args);
-        puc = (unsigned char *)ul;
-        if (puc == 0)
-                return (void *)0;
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-        uc = *puc++;
-        ul = (unsigned long)uc;
-        uc = *puc++;
-        ul |= (((unsigned long)uc) << 8);
-        uc = *puc++;
-        ul |= (((unsigned long)uc) << 16);
-        uc = *puc++;
-        ul |= (((unsigned long)uc) << 24);
-#else  /* CONFIG_CPU_LITTLE_ENDIAN */
-        uc = *puc++;
-        ul = ((unsigned long)uc) << 24;
-        uc = *puc++;
-        ul |= (((unsigned long)uc) << 16);
-        uc = *puc++;
-        ul |= (((unsigned long)uc) << 8);
-        uc = *puc++;
-        ul |= ((unsigned long)uc);
-#endif  /* CONFIG_CPU_LITTLE_ENDIAN */
-        ul = signext(ul);
-        return (void *)ul;
-}
-char *arg64(unsigned long addrin, int arg_index)
-{
-        unsigned long args;
-        char *p;
-        args = signext(addrin);
-        p = (char *)get_arg(args, arg_index);
-        return p;
-}
-#endif  /* CONFIG_64BIT */
-void __init prom_init(void)
-{
-        int argc = fw_arg0;
-        char **arg = (char **) fw_arg1;
-        char **env = (char **) fw_arg2;
-        struct callvectors *cv = (struct callvectors *) fw_arg3;
-        int i;
-#ifdef CONFIG_64BIT
-        char *ptr;
-        printk("prom_init - MIPS64\n");
-        /* save the PROM vectors for debugging use */
-        debug_vectors = (struct callvectors *)signext((unsigned long)cv);
-        /* arg[0] is "g", the rest is boot parameters */
-        arcs_cmdline[0] = '\0';
-        for (i = 1; i < argc; i++) {
-                ptr = (char *)arg64((unsigned long)arg, i);
-                if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
-                    sizeof(arcs_cmdline))
-                        break;
-                strcat(arcs_cmdline, ptr);
-                strcat(arcs_cmdline, " ");
-        }
-        i = 0;
-        while (1) {
-                ptr = (char *)arg64((unsigned long)env, i);
-                if (! ptr)
-                        break;
-                if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
-                        marvell_base = simple_strtol(ptr + strlen("gtbase="),
-                                                        NULL, 16);
-                        if ((marvell_base & 0xffffffff00000000) == 0)
-                                marvell_base |= 0xffffffff00000000;
-                        printk("marvell_base set to 0x%016lx\n", marvell_base);
-                }
-                if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
-                        cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
-                                                        NULL, 10);
-                        printk("cpu_clock set to %d\n", cpu_clock);
-                }
-                i++;
-        }
-        printk("arcs_cmdline: %s\n", arcs_cmdline);
-#else   /* CONFIG_64BIT */
-        /* save the PROM vectors for debugging use */
-        debug_vectors = cv;
-        /* arg[0] is "g", the rest is boot parameters */
-        arcs_cmdline[0] = '\0';
-        for (i = 1; i < argc; i++) {
-                if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-                    >= sizeof(arcs_cmdline))
-                        break;
-                strcat(arcs_cmdline, arg[i]);
-                strcat(arcs_cmdline, " ");
-        }
-        while (*env) {
-                if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-                        marvell_base = simple_strtol(*env + strlen("gtbase="),
-                                                        NULL, 16);
-                }
-                if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
-                        cpu_clock = simple_strtol(*env + strlen("cpuclock="),
-                                                        NULL, 10);
-                }
-                env++;
-        }
-#endif /* CONFIG_64BIT */
-        mips_machgroup = MACH_GROUP_MOMENCO;
-        mips_machtype = MACH_MOMENCO_OCELOT_3;
-#ifndef CONFIG_64BIT
-        debug_vectors->printf("Booting Linux kernel...\n");
-#endif
-}
-void __init prom_free_prom_memory(void)
-{
-}
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-}
diff --git a/arch/mips/momentum/ocelot_3/reset.c b/arch/mips/momentum/ocelot_3/reset.c
deleted file mode 100644
index 9d86d2468376..000000000000
--- a/arch/mips/momentum/ocelot_3/reset.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 01, 05 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com  [MIPS64 modifications]
- *
- * Copyright 2004 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-void momenco_ocelot_restart(char *command)
-{
-        /* base address of timekeeper portion of part */
-        void *nvram = (void *) 0xfc807000L;
-        /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
-        writeb(0x84, nvram + 0xff7);
-        /* wait for the watchdog to go off */
-        mdelay(100+(1000/16));
-        /* if the watchdog fails for some reason, let people know */
-        printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-void momenco_ocelot_halt(void)
-{
-        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-        while (1)
-                __asm__(".set\tmips3\n\t"
-                        "wait\n\t"
-                        ".set\tmips0");
-}
-void momenco_ocelot_power_off(void)
-{
-        momenco_ocelot_halt();
-}
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
deleted file mode 100644
index ff0829f81116..000000000000
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * setup.c
- *
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Ocelot-3 board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 01, 05 - 06  Ralf Baechle
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: Matthew Dharm, Momentum Computer
- *   mdharm@momenco.com
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2004 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mc146818rtc.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <linux/bootmem.h>
-#include <linux/mv643xx.h>
-#include <linux/pm.h>
-#include <linux/bcd.h>
-#include <asm/time.h>
-#include <asm/page.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/mc146818rtc.h>
-#include <asm/tlbflush.h>
-#include "ocelot_3_fpga.h"
-/* Marvell Discovery Register Base */
-unsigned long marvell_base = (signed)0xf4000000;
-/* CPU clock */
-unsigned long cpu_clock;
-/* RTC/NVRAM */
-unsigned char* rtc_base = (unsigned char*)(signed)0xfc800000;
-/* FPGA Base */
-unsigned long ocelot_fpga_base = (signed)0xfc000000;
-/* Serial base */
-unsigned long uart_base = (signed)0xfd000000;
-/*
- * Marvell Discovery SRAM. This is one place where Ethernet
- * Tx and Rx descriptors can be placed to improve performance
- */
-extern unsigned long mv64340_sram_base;
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_ocelot_restart(char *command);
-extern void momenco_ocelot_halt(void);
-extern void momenco_ocelot_power_off(void);
-void momenco_time_init(void);
-static char reset_reason;
-void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
-                     unsigned long entryhi, unsigned long pagemask);
-static inline unsigned long ENTRYLO(unsigned long paddr)
-{
-        return ((paddr & PAGE_MASK) |
-                (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
-                _CACHE_UNCACHED)) >> 6;
-}
-void __init bus_error_init(void)
-{
-        /* nothing */
-}
-/*
- * setup code for a handoff from a version 2 PMON 2000 PROM
- */
-void setup_wired_tlb_entries(void)
-{
-        write_c0_wired(0);
-        local_flush_tlb_all();
-        /* marvell and extra space */
-        add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), (signed)0xf4000000, PM_64K);
-        /* fpga, rtc, and uart */
-        add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), (signed)0xfc000000, PM_16M);
-}
-unsigned long m48t37y_get_time(void)
-{
-        unsigned int year, month, day, hour, min, sec;
-        unsigned long flags;
-        spin_lock_irqsave(&rtc_lock, flags);
-        /* stop the update */
-        rtc_base[0x7ff8] = 0x40;
-        year = BCD2BIN(rtc_base[0x7fff]);
-        year += BCD2BIN(rtc_base[0x7ff1]) * 100;
-        month = BCD2BIN(rtc_base[0x7ffe]);
-        day = BCD2BIN(rtc_base[0x7ffd]);
-        hour = BCD2BIN(rtc_base[0x7ffb]);
-        min = BCD2BIN(rtc_base[0x7ffa]);
-        sec = BCD2BIN(rtc_base[0x7ff9]);
-        /* start the update */
-        rtc_base[0x7ff8] = 0x00;
-        spin_unlock_irqrestore(&rtc_lock, flags);
-        return mktime(year, month, day, hour, min, sec);
-}
-int m48t37y_set_time(unsigned long sec)
-{
-        struct rtc_time tm;
-        unsigned long flags;
-        /* convert to a more useful format -- note months count from 0 */
-        to_tm(sec, &tm);
-        tm.tm_mon += 1;
-        spin_lock_irqsave(&rtc_lock, flags);
-        /* enable writing */
-        rtc_base[0x7ff8] = 0x80;
-        /* year */
-        rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
-        rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
-        /* month */
-        rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
-        /* day */
-        rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
-        /* hour/min/sec */
-        rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
-        rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
-        rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
-        /* day of week -- not really used, but let's keep it up-to-date */
-        rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
-        /* disable writing */
-        rtc_base[0x7ff8] = 0x00;
-        spin_unlock_irqrestore(&rtc_lock, flags);
-        return 0;
-}
-void __init plat_timer_setup(struct irqaction *irq)
-{
-        setup_irq(7, irq);      /* Timer interrupt, unmask status IM7 */
-}
-void momenco_time_init(void)
-{
-        setup_wired_tlb_entries();
-        /*
-         * Ocelot-3 board has been built with both
-         * the Rm7900 and the Rm7065C
-         */
-        mips_hpt_frequency = cpu_clock / 2;
-        rtc_mips_get_time = m48t37y_get_time;
-        rtc_mips_set_time = m48t37y_set_time;
-}
-/*
- * PCI Support for Ocelot-3
- */
-/* Bus #0 IO and MEM space */
-#define OCELOT_3_PCI_IO_0_START         0xe0000000
-#define OCELOT_3_PCI_IO_0_SIZE          0x08000000
-#define OCELOT_3_PCI_MEM_0_START        0xc0000000
-#define OCELOT_3_PCI_MEM_0_SIZE         0x10000000
-/* Bus #1 IO and MEM space */
-#define OCELOT_3_PCI_IO_1_START         0xe8000000
-#define OCELOT_3_PCI_IO_1_SIZE          0x08000000
-#define OCELOT_3_PCI_MEM_1_START        0xd0000000
-#define OCELOT_3_PCI_MEM_1_SIZE         0x10000000
-static struct resource mv_pci_io_mem0_resource = {
-        .name   = "MV64340 PCI0 IO MEM",
-        .start  = OCELOT_3_PCI_IO_0_START,
-        .end    = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE - 1,
-        .flags  = IORESOURCE_IO,
-};
-static struct resource mv_pci_io_mem1_resource = {
-        .name   = "MV64340 PCI1 IO MEM",
-        .start  = OCELOT_3_PCI_IO_1_START,
-        .end    = OCELOT_3_PCI_IO_1_START + OCELOT_3_PCI_IO_1_SIZE - 1,
-        .flags  = IORESOURCE_IO,
-};
-static struct resource mv_pci_mem0_resource = {
-        .name   = "MV64340 PCI0 MEM",
-        .start  = OCELOT_3_PCI_MEM_0_START,
-        .end    = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE - 1,
-        .flags  = IORESOURCE_MEM,
-};
-static struct resource mv_pci_mem1_resource = {
-        .name   = "MV64340 PCI1 MEM",
-        .start  = OCELOT_3_PCI_MEM_1_START,
-        .end    = OCELOT_3_PCI_MEM_1_START + OCELOT_3_PCI_MEM_1_SIZE - 1,
-        .flags  = IORESOURCE_MEM,
-};
-static struct mv_pci_controller mv_bus0_controller = {
-        .pcic = {
-                 .pci_ops       = &mv_pci_ops,
-                 .mem_resource  = &mv_pci_mem0_resource,
-                 .io_resource   = &mv_pci_io_mem0_resource,
-        },
-        .config_addr    = MV64340_PCI_0_CONFIG_ADDR,
-        .config_vreg    = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
-};
-static struct mv_pci_controller mv_bus1_controller = {
-        .pcic = {
-                 .pci_ops       = &mv_pci_ops,
-                 .mem_resource  = &mv_pci_mem1_resource,
-                 .io_resource   = &mv_pci_io_mem1_resource,
-        },
-        .config_addr    = MV64340_PCI_1_CONFIG_ADDR,
-        .config_vreg    = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
-};
-static __init int __init ja_pci_init(void)
-{
-        uint32_t enable;
-        extern int pci_probe_only;
-        /* PMON will assign PCI resources */
-        pci_probe_only = 1;
-        enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
-        /*
-         * We require at least one enabled I/O or PCI memory window or we
-         * will ignore this PCI bus.  We ignore PCI windows 1, 2 and 3.
-         */
-        if (enable & (0x01 <<  9) || enable & (0x01 << 10))
-                register_pci_controller(&mv_bus0_controller.pcic);
-        if (enable & (0x01 << 14) || enable & (0x01 << 15))
-                register_pci_controller(&mv_bus1_controller.pcic);
-        ioport_resource.end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE +
-                                        OCELOT_3_PCI_IO_1_SIZE - 1;
-        iomem_resource.end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE +
-                                        OCELOT_3_PCI_MEM_1_SIZE - 1;
-        set_io_port_base(OCELOT_3_PCI_IO_0_START); /* mips_io_port_base */
-        return 0;
-}
-arch_initcall(ja_pci_init);
-void __init plat_mem_setup(void)
-{
-        unsigned int tmpword;
-        board_time_init = momenco_time_init;
-        _machine_restart = momenco_ocelot_restart;
-        _machine_halt = momenco_ocelot_halt;
-        pm_power_off = momenco_ocelot_power_off;
-        /* Wired TLB entries */
-        setup_wired_tlb_entries();
-        /* shut down ethernet ports, just to be sure our memory doesn't get
-         * corrupted by random ethernet traffic.
-         */
-        MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-        MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-        MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-        MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
-        do {}
-          while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
-        do {}
-          while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
-        do {}
-          while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
-        do {}
-          while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-        MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
-                 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-        MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
-                 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
-        /* Turn off the Bit-Error LED */
-        OCELOT_FPGA_WRITE(0x80, CLR);
-        tmpword = OCELOT_FPGA_READ(BOARDREV);
-        if (tmpword < 26)
-                printk("Momenco Ocelot-3: Board Assembly Rev. %c\n",
-                        'A'+tmpword);
-        else
-                printk("Momenco Ocelot-3: Board Assembly Revision #0x%x\n",
-                        tmpword);
-        tmpword = OCELOT_FPGA_READ(FPGA_REV);
-        printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
-        tmpword = OCELOT_FPGA_READ(RESET_STATUS);
-        printk("Reset reason: 0x%x\n", tmpword);
-        switch (tmpword) {
-                case 0x1:
-                        printk("  - Power-up reset\n");
-                        break;
-                case 0x2:
-                        printk("  - Push-button reset\n");
-                        break;
-                case 0x4:
-                        printk("  - cPCI bus reset\n");
-                        break;
-                case 0x8:
-                        printk("  - Watchdog reset\n");
-                        break;
-                case 0x10:
-                        printk("  - Software reset\n");
-                        break;
-                default:
-                        printk("  - Unknown reset cause\n");
-        }
-        reset_reason = tmpword;
-        OCELOT_FPGA_WRITE(0xff, RESET_STATUS);
-        tmpword = OCELOT_FPGA_READ(CPCI_ID);
-        printk("cPCI ID register: 0x%02x\n", tmpword);
-        printk("  - Slot number: %d\n", tmpword & 0x1f);
-        printk("  - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no");
-        printk("  - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no");
-        tmpword = OCELOT_FPGA_READ(BOARD_STATUS);
-        printk("Board Status register: 0x%02x\n", tmpword);
-        printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
-        printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
-        printk("  - L3 cache size: %d MB\n", (1<<((tmpword&12) >> 2))&~1);
-        /* Support for 128 MB memory */
-        add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index cfebf58c8dc6..f26ede001a0b 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -9,7 +9,6 @@ obj-y				+= pci.o pci-dac.o
 #
 obj-$(CONFIG_MIPS_BONITO64)     += ops-bonito64.o
 obj-$(CONFIG_PCI_GT64XXX_PCI0)  += ops-gt64xxx_pci0.o
-obj-$(CONFIG_PCI_MARVELL)       += ops-marvell.o
 obj-$(CONFIG_MIPS_MSC)          += ops-msc.o
 obj-$(CONFIG_MIPS_TX3927)       += ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)        += ops-vr41xx.o pci-vr41xx.o
@@ -29,7 +28,6 @@ obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_LEMOTE_FULONG)     += fixup-lm2e.o ops-bonito64.o
 obj-$(CONFIG_MIPS_MALTA)        += fixup-malta.o
 obj-$(CONFIG_MOMENCO_OCELOT)    += fixup-ocelot.o pci-ocelot.o
-obj-$(CONFIG_MOMENCO_OCELOT_3)  += fixup-ocelot3.o
 obj-$(CONFIG_PMC_MSP7120_GW)    += fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)  += fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_FPGA)  += fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/fixup-ocelot3.c b/arch/mips/pci/fixup-ocelot3.c
deleted file mode 100644
index 702f997b8673..000000000000
--- a/arch/mips/pci/fixup-ocelot3.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Montavista Software Inc.
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- * Looking at the schematics for the Ocelot-3 board, there are
- * two PCI busses and each bus has two PCI slots.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/mipsregs.h>
-/*
- * Do platform specific device initialization at
- * pci_enable_device() time
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-        return 0;
-}
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-        int bus = dev->bus->number;
-        if (bus == 0 && slot == 1)
-                return 2;       /* PCI-X A */
-        if (bus == 0 && slot == 2)
-                return 3;       /* PCI-X B */
-        if (bus == 1 && slot == 1)
-                return 4;       /* PCI A */
-        if (bus == 1 && slot == 2)
-                return 5;       /* PCI B */
-return 0;
-        panic("Whooops in pcibios_map_irq");
-}
diff --git a/arch/mips/pci/ops-marvell.c b/arch/mips/pci/ops-marvell.c
deleted file mode 100644
index 1ac5c59199d1..000000000000
--- a/arch/mips/pci/ops-marvell.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/marvell.h>
-static int mv_read_config(struct pci_bus *bus, unsigned int devfn,
-        int where, int size, u32 * val)
-{
-        struct mv_pci_controller *mvbc = bus->sysdata;
-        unsigned long address_reg, data_reg;
-        u32 address;
-        address_reg = mvbc->config_addr;
-        data_reg = mvbc->config_vreg;
-        /* Accessing device 31 crashes those Marvells.  Since years.
-           Will they ever make sane controllers ... */
-        if (PCI_SLOT(devfn) == 31)
-                return PCIBIOS_DEVICE_NOT_FOUND;
-        address = (bus->number << 16) | (devfn << 8) |
-                  (where & 0xfc) | 0x80000000;
-        /* start the configuration cycle */
-        MV_WRITE(address_reg, address);
-        switch (size) {
-        case 1:
-                *val = MV_READ_8(data_reg + (where & 0x3));
-                break;
-        case 2:
-                *val = MV_READ_16(data_reg + (where & 0x3));
-                break;
-        case 4:
-                *val = MV_READ(data_reg);
-                break;
-        }
-        return PCIBIOS_SUCCESSFUL;
-}
-static int mv_write_config(struct pci_bus *bus, unsigned int devfn,
-        int where, int size, u32 val)
-{
-        struct mv_pci_controller *mvbc = bus->sysdata;
-        unsigned long address_reg, data_reg;
-        u32 address;
-        address_reg = mvbc->config_addr;
-        data_reg = mvbc->config_vreg;
-        /* Accessing device 31 crashes those Marvells.  Since years.
-           Will they ever make sane controllers ... */
-        if (PCI_SLOT(devfn) == 31)
-                return PCIBIOS_DEVICE_NOT_FOUND;
-        address = (bus->number << 16) | (devfn << 8) |
-                  (where & 0xfc) | 0x80000000;
-        /* start the configuration cycle */
-        MV_WRITE(address_reg, address);
-        switch (size) {
-        case 1:
-                MV_WRITE_8(data_reg + (where & 0x3), val);
-                break;
-        case 2:
-                MV_WRITE_16(data_reg + (where & 0x3), val);
-                break;
-        case 4:
-                MV_WRITE(data_reg, val);
-                break;
-        }
-        return PCIBIOS_SUCCESSFUL;
-}
-struct pci_ops mv_pci_ops = {
-        .read   = mv_read_config,
-        .write  = mv_write_config
-};
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3d5db2597b88..627316db3744 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2307,7 +2307,7 @@ config UGETH_TX_ON_DEMAND
 config MV643XX_ETH
        tristate "MV-643XX Ethernet support"
-        depends on MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
+        depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32)
        select MII
        help
          This driver supports the gigabit Ethernet on the Marvell MV643XX
diff --git a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
deleted file mode 100644
index 57a12ded0613..000000000000
--- a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- * Copyright (C) 2004 Ralf Baechle
- */
-#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-/*
- * Momentum Ocelot-3 is based on Rm7900 processor which
- * is based on the E9000 core.
- */
-#define cpu_has_watch           1
-#define cpu_has_mips16          0
-#define cpu_has_divec           0
-#define cpu_has_vce             0
-#define cpu_has_cache_cdex_p    0
-#define cpu_has_cache_cdex_s    0
-#define cpu_has_prefetch        1
-#define cpu_has_mcheck          0
-#define cpu_has_ejtag           0
-#define cpu_has_llsc            1
-#define cpu_has_vtag_icache     0
-#define cpu_has_dc_aliases      0
-#define cpu_has_ic_fills_f_dc   0
-#define cpu_has_dsp             0
-#define cpu_icache_snoops_remote_store  0
-#define cpu_has_nofpuex         0
-#define cpu_has_64bits          1
-#define cpu_has_inclusive_pcaches       0
-#define cpu_dcache_line_size()  32
-#define cpu_icache_line_size()  32
-#define cpu_scache_line_size()  32
-#define cpu_has_mips32r1        0
-#define cpu_has_mips32r2        0
-#define cpu_has_mips64r1        0
-#define cpu_has_mips64r2        0
-#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index 45cb82724830..9de52a5b0f3d 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -183,8 +183,8 @@
 */
 #if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \
    defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MOMENCO_OCELOT) || \
-    defined(CONFIG_MOMENCO_OCELOT_3) || defined(CONFIG_PMC_YOSEMITE) || \
+    defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_SGI_IP32) || \
-    defined(CONFIG_SGI_IP32) || defined(CONFIG_WR_PPMC)
+    defined(CONFIG_WR_PPMC)
 #define ICACHE_REFILLS_WORKAROUND_WAR   1
 #endif
diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
index c6d4ab86b83c..b021b3a2b65a 100644
--- a/include/linux/mv643xx.h
+++ b/include/linux/mv643xx.h
@@ -13,10 +13,6 @@
 #ifndef __ASM_MV643XX_H
 #define __ASM_MV643XX_H
-#ifdef __mips__
-#include <asm/addrspace.h>
-#include <asm/marvell.h>
-#endif
 #include <asm/types.h>
 /****************************************/