4 files changed, 11 insertions, 5 deletions

diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index 1d640d075b7e..e0f911d9e021 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -17,6 +17,11 @@
 #include <asm/sizes.h>
 
 /*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE       25000000
+
+/*
  * Physical RAM address.
  */
 #define KS8695_SDRAM_PA         0x00000000
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
index 4682e350369b..10f716371bd3 100644
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -14,7 +14,8 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE         KS8695_CLOCK_RATE
 
 #endif
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 998e89dc5aaf..e0665630e4da 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -549,7 +549,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
                 .mapbase        = KS8695_UART_VA,
                 .iotype         = SERIAL_IO_MEM,
                 .irq            = KS8695_IRQ_UART_TX,
-                .uartclk        = CLOCK_TICK_RATE * 16,
+                .uartclk        = KS8695_CLOCK_RATE * 16,
                 .fifosize       = 16,
                 .ops            = &ks8695uart_pops,
                 .flags          = ASYNC_BOOT_AUTOCONF,
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 00b03eb43bf0..e1c82769b08e 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -66,7 +66,7 @@ static inline void ks8695_wdt_stop(void)
 static inline void ks8695_wdt_start(void)
 {
         unsigned long tmcon;
-        unsigned long tval = wdt_time * CLOCK_TICK_RATE;
+        unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
 
         spin_lock(&ks8695_lock);
         /* disable timer0 */
@@ -103,7 +103,7 @@ static inline void ks8695_wdt_reload(void)
 static int ks8695_wdt_settimeout(int new_time)
 {
         /*
-         * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+         * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
          *
          * Since WDV is a 16-bit counter, the maximum period is
          * 65536 / 0.256 = 256 seconds.