diff options
-rw-r--r-- | drivers/w1/slaves/Kconfig | 13 | ||||
-rw-r--r-- | drivers/w1/slaves/Makefile | 1 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_ds2760.c | 213 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_ds2760.h | 50 | ||||
-rw-r--r-- | drivers/w1/w1_family.h | 1 |
5 files changed, 278 insertions, 0 deletions
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 904e5aeb696c..df95d6c2cefa 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig | |||
@@ -35,4 +35,17 @@ config W1_SLAVE_DS2433_CRC | |||
35 | Each block has 30 bytes of data and a two byte CRC16. | 35 | Each block has 30 bytes of data and a two byte CRC16. |
36 | Full block writes are only allowed if the CRC is valid. | 36 | Full block writes are only allowed if the CRC is valid. |
37 | 37 | ||
38 | config W1_SLAVE_DS2760 | ||
39 | tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)" | ||
40 | depends on W1 | ||
41 | help | ||
42 | If you enable this you will have the DS2760 battery monitor | ||
43 | chip support. | ||
44 | |||
45 | The battery monitor chip is used in many batteries/devices | ||
46 | as the one who is responsible for charging/discharging/monitoring | ||
47 | Li+ batteries. | ||
48 | |||
49 | If you are unsure, say N. | ||
50 | |||
38 | endmenu | 51 | endmenu |
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 725dcfdfddb4..a8eb7524df1d 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile | |||
@@ -5,4 +5,5 @@ | |||
5 | obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o | 5 | obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o |
6 | obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o | 6 | obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o |
7 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o | 7 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o |
8 | obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o | ||
8 | 9 | ||
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c new file mode 100644 index 000000000000..88a37fbccc3f --- /dev/null +++ b/drivers/w1/slaves/w1_ds2760.c | |||
@@ -0,0 +1,213 @@ | |||
1 | /* | ||
2 | * 1-Wire implementation for the ds2760 chip | ||
3 | * | ||
4 | * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> | ||
5 | * | ||
6 | * Use consistent with the GNU GPL is permitted, | ||
7 | * provided that this copyright notice is | ||
8 | * preserved in its entirety in all copies and derived works. | ||
9 | * | ||
10 | */ | ||
11 | |||
12 | #include <linux/kernel.h> | ||
13 | #include <linux/module.h> | ||
14 | #include <linux/device.h> | ||
15 | #include <linux/types.h> | ||
16 | #include <linux/platform_device.h> | ||
17 | #include <linux/mutex.h> | ||
18 | #include <linux/idr.h> | ||
19 | |||
20 | #include "../w1.h" | ||
21 | #include "../w1_int.h" | ||
22 | #include "../w1_family.h" | ||
23 | #include "w1_ds2760.h" | ||
24 | |||
25 | static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count, | ||
26 | int io) | ||
27 | { | ||
28 | struct w1_slave *sl = container_of(dev, struct w1_slave, dev); | ||
29 | |||
30 | if (!dev) | ||
31 | return 0; | ||
32 | |||
33 | mutex_lock(&sl->master->mutex); | ||
34 | |||
35 | if (addr > DS2760_DATA_SIZE || addr < 0) { | ||
36 | count = 0; | ||
37 | goto out; | ||
38 | } | ||
39 | if (addr + count > DS2760_DATA_SIZE) | ||
40 | count = DS2760_DATA_SIZE - addr; | ||
41 | |||
42 | if (!w1_reset_select_slave(sl)) { | ||
43 | if (!io) { | ||
44 | w1_write_8(sl->master, W1_DS2760_READ_DATA); | ||
45 | w1_write_8(sl->master, addr); | ||
46 | count = w1_read_block(sl->master, buf, count); | ||
47 | } else { | ||
48 | w1_write_8(sl->master, W1_DS2760_WRITE_DATA); | ||
49 | w1_write_8(sl->master, addr); | ||
50 | w1_write_block(sl->master, buf, count); | ||
51 | /* XXX w1_write_block returns void, not n_written */ | ||
52 | } | ||
53 | } | ||
54 | |||
55 | out: | ||
56 | mutex_unlock(&sl->master->mutex); | ||
57 | |||
58 | return count; | ||
59 | } | ||
60 | |||
61 | int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count) | ||
62 | { | ||
63 | return w1_ds2760_io(dev, buf, addr, count, 0); | ||
64 | } | ||
65 | |||
66 | int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count) | ||
67 | { | ||
68 | return w1_ds2760_io(dev, buf, addr, count, 1); | ||
69 | } | ||
70 | |||
71 | static ssize_t w1_ds2760_read_bin(struct kobject *kobj, char *buf, loff_t off, | ||
72 | size_t count) | ||
73 | { | ||
74 | struct device *dev = container_of(kobj, struct device, kobj); | ||
75 | return w1_ds2760_read(dev, buf, off, count); | ||
76 | } | ||
77 | |||
78 | static struct bin_attribute w1_ds2760_bin_attr = { | ||
79 | .attr = { | ||
80 | .name = "w1_slave", | ||
81 | .mode = S_IRUGO, | ||
82 | .owner = THIS_MODULE, | ||
83 | }, | ||
84 | .size = DS2760_DATA_SIZE, | ||
85 | .read = w1_ds2760_read_bin, | ||
86 | }; | ||
87 | |||
88 | static DEFINE_IDR(bat_idr); | ||
89 | static DEFINE_MUTEX(bat_idr_lock); | ||
90 | |||
91 | static int new_bat_id(void) | ||
92 | { | ||
93 | int ret; | ||
94 | |||
95 | while (1) { | ||
96 | int id; | ||
97 | |||
98 | ret = idr_pre_get(&bat_idr, GFP_KERNEL); | ||
99 | if (ret == 0) | ||
100 | return -ENOMEM; | ||
101 | |||
102 | mutex_lock(&bat_idr_lock); | ||
103 | ret = idr_get_new(&bat_idr, NULL, &id); | ||
104 | mutex_unlock(&bat_idr_lock); | ||
105 | |||
106 | if (ret == 0) { | ||
107 | ret = id & MAX_ID_MASK; | ||
108 | break; | ||
109 | } else if (ret == -EAGAIN) { | ||
110 | continue; | ||
111 | } else { | ||
112 | break; | ||
113 | } | ||
114 | } | ||
115 | |||
116 | return ret; | ||
117 | } | ||
118 | |||
119 | static void release_bat_id(int id) | ||
120 | { | ||
121 | mutex_lock(&bat_idr_lock); | ||
122 | idr_remove(&bat_idr, id); | ||
123 | mutex_unlock(&bat_idr_lock); | ||
124 | |||
125 | return; | ||
126 | } | ||
127 | |||
128 | static int w1_ds2760_add_slave(struct w1_slave *sl) | ||
129 | { | ||
130 | int ret; | ||
131 | int id; | ||
132 | struct platform_device *pdev; | ||
133 | |||
134 | id = new_bat_id(); | ||
135 | if (id < 0) { | ||
136 | ret = id; | ||
137 | goto noid; | ||
138 | } | ||
139 | |||
140 | pdev = platform_device_alloc("ds2760-battery", id); | ||
141 | if (!pdev) { | ||
142 | ret = -ENOMEM; | ||
143 | goto pdev_alloc_failed; | ||
144 | } | ||
145 | pdev->dev.parent = &sl->dev; | ||
146 | |||
147 | ret = platform_device_add(pdev); | ||
148 | if (ret) | ||
149 | goto pdev_add_failed; | ||
150 | |||
151 | ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr); | ||
152 | if (ret) | ||
153 | goto bin_attr_failed; | ||
154 | |||
155 | dev_set_drvdata(&sl->dev, pdev); | ||
156 | |||
157 | goto success; | ||
158 | |||
159 | bin_attr_failed: | ||
160 | pdev_add_failed: | ||
161 | platform_device_unregister(pdev); | ||
162 | pdev_alloc_failed: | ||
163 | release_bat_id(id); | ||
164 | noid: | ||
165 | success: | ||
166 | return ret; | ||
167 | } | ||
168 | |||
169 | static void w1_ds2760_remove_slave(struct w1_slave *sl) | ||
170 | { | ||
171 | struct platform_device *pdev = dev_get_drvdata(&sl->dev); | ||
172 | int id = pdev->id; | ||
173 | |||
174 | platform_device_unregister(pdev); | ||
175 | release_bat_id(id); | ||
176 | sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr); | ||
177 | |||
178 | return; | ||
179 | } | ||
180 | |||
181 | static struct w1_family_ops w1_ds2760_fops = { | ||
182 | .add_slave = w1_ds2760_add_slave, | ||
183 | .remove_slave = w1_ds2760_remove_slave, | ||
184 | }; | ||
185 | |||
186 | static struct w1_family w1_ds2760_family = { | ||
187 | .fid = W1_FAMILY_DS2760, | ||
188 | .fops = &w1_ds2760_fops, | ||
189 | }; | ||
190 | |||
191 | static int __init w1_ds2760_init(void) | ||
192 | { | ||
193 | printk(KERN_INFO "1-Wire driver for the DS2760 battery monitor " | ||
194 | " chip - (c) 2004-2005, Szabolcs Gyurko\n"); | ||
195 | idr_init(&bat_idr); | ||
196 | return w1_register_family(&w1_ds2760_family); | ||
197 | } | ||
198 | |||
199 | static void __exit w1_ds2760_exit(void) | ||
200 | { | ||
201 | w1_unregister_family(&w1_ds2760_family); | ||
202 | idr_destroy(&bat_idr); | ||
203 | } | ||
204 | |||
205 | EXPORT_SYMBOL(w1_ds2760_read); | ||
206 | EXPORT_SYMBOL(w1_ds2760_write); | ||
207 | |||
208 | module_init(w1_ds2760_init); | ||
209 | module_exit(w1_ds2760_exit); | ||
210 | |||
211 | MODULE_LICENSE("GPL"); | ||
212 | MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>"); | ||
213 | MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip"); | ||
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h new file mode 100644 index 000000000000..f1302429cb02 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2760.h | |||
@@ -0,0 +1,50 @@ | |||
1 | /* | ||
2 | * 1-Wire implementation for the ds2760 chip | ||
3 | * | ||
4 | * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> | ||
5 | * | ||
6 | * Use consistent with the GNU GPL is permitted, | ||
7 | * provided that this copyright notice is | ||
8 | * preserved in its entirety in all copies and derived works. | ||
9 | * | ||
10 | */ | ||
11 | |||
12 | #ifndef __w1_ds2760_h__ | ||
13 | #define __w1_ds2760_h__ | ||
14 | |||
15 | /* Known commands to the DS2760 chip */ | ||
16 | #define W1_DS2760_SWAP 0xAA | ||
17 | #define W1_DS2760_READ_DATA 0x69 | ||
18 | #define W1_DS2760_WRITE_DATA 0x6C | ||
19 | #define W1_DS2760_COPY_DATA 0x48 | ||
20 | #define W1_DS2760_RECALL_DATA 0xB8 | ||
21 | #define W1_DS2760_LOCK 0x6A | ||
22 | |||
23 | /* Number of valid register addresses */ | ||
24 | #define DS2760_DATA_SIZE 0x40 | ||
25 | |||
26 | #define DS2760_PROTECTION_REG 0x00 | ||
27 | #define DS2760_STATUS_REG 0x01 | ||
28 | #define DS2760_EEPROM_REG 0x07 | ||
29 | #define DS2760_SPECIAL_FEATURE_REG 0x08 | ||
30 | #define DS2760_VOLTAGE_MSB 0x0c | ||
31 | #define DS2760_VOLTAGE_LSB 0x0d | ||
32 | #define DS2760_CURRENT_MSB 0x0e | ||
33 | #define DS2760_CURRENT_LSB 0x0f | ||
34 | #define DS2760_CURRENT_ACCUM_MSB 0x10 | ||
35 | #define DS2760_CURRENT_ACCUM_LSB 0x11 | ||
36 | #define DS2760_TEMP_MSB 0x18 | ||
37 | #define DS2760_TEMP_LSB 0x19 | ||
38 | #define DS2760_EEPROM_BLOCK0 0x20 | ||
39 | #define DS2760_ACTIVE_FULL 0x20 | ||
40 | #define DS2760_EEPROM_BLOCK1 0x30 | ||
41 | #define DS2760_RATED_CAPACITY 0x32 | ||
42 | #define DS2760_CURRENT_OFFSET_BIAS 0x33 | ||
43 | #define DS2760_ACTIVE_EMPTY 0x3b | ||
44 | |||
45 | extern int w1_ds2760_read(struct device *dev, char *buf, int addr, | ||
46 | size_t count); | ||
47 | extern int w1_ds2760_write(struct device *dev, char *buf, int addr, | ||
48 | size_t count); | ||
49 | |||
50 | #endif /* !__w1_ds2760_h__ */ | ||
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index 1e2ac40c2c14..ef1e1dafa19a 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h | |||
@@ -33,6 +33,7 @@ | |||
33 | #define W1_THERM_DS1822 0x22 | 33 | #define W1_THERM_DS1822 0x22 |
34 | #define W1_EEPROM_DS2433 0x23 | 34 | #define W1_EEPROM_DS2433 0x23 |
35 | #define W1_THERM_DS18B20 0x28 | 35 | #define W1_THERM_DS18B20 0x28 |
36 | #define W1_FAMILY_DS2760 0x30 | ||
36 | 37 | ||
37 | #define MAXNAMELEN 32 | 38 | #define MAXNAMELEN 32 |
38 | 39 | ||