5 files changed, 87 insertions, 0 deletions

diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 17a0cbce6f30..99b4f294a52d 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -653,6 +653,24 @@ config I8K
           Say Y if you intend to run this kernel on a Dell Inspiron 8000.
           Say N otherwise.
 
+config X86_REBOOTFIXUPS
+        bool "Enable X86 board specific fixups for reboot"
+        depends on X86
+        default n
+        ---help---
+          This enables chipset and/or board specific fixups to be done
+          in order to get reboot to work correctly. This is only needed on
+          some combinations of hardware and BIOS. The symptom, for which
+          this config is intended, is when reboot ends with a stalled/hung
+          system.
+
+          Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1.
+          combination.
+
+          Say Y if you want to enable the fixup. Currently, it's safe to
+          enable this option even if you don't need it.
+          Say N otherwise.
+
 config MICROCODE
         tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
         ---help---
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index aacdae6f372d..0fbcfe00dd8d 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-$(CONFIG_X86_MPPARSE)       += mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)    += apic.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)       += io_apic.o
+obj-$(CONFIG_X86_REBOOTFIXUPS)  += reboot_fixups.o
 obj-$(CONFIG_X86_NUMAQ)         += numaq.o
 obj-$(CONFIG_X86_SUMMIT_NUMA)   += summit.o
 obj-$(CONFIG_KPROBES)           += kprobes.o
diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c
index 3d7e994563df..6dc27eb70ee7 100644
--- a/arch/i386/kernel/reboot.c
+++ b/arch/i386/kernel/reboot.c
@@ -13,6 +13,7 @@
 #include <asm/uaccess.h>
 #include <asm/apic.h>
 #include "mach_reboot.h"
+#include <linux/reboot_fixups.h>
 
 /*
  * Power off function, if any
@@ -348,6 +349,7 @@ void machine_restart(char * __unused)
                 /* rebooting needs to touch the page at absolute addr 0 */
                 *((unsigned short *)__va(0x472)) = reboot_mode;
                 for (;;) {
+                        mach_reboot_fixups(); /* for board specific fixups */
                         mach_reboot();
                         /* That didn't work - force a triple fault.. */
                         __asm__ __volatile__("lidt %0": :"m" (no_idt));
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
new file mode 100644
index 000000000000..1b183b378c2c
--- /dev/null
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -0,0 +1,56 @@
+/*
+ * linux/arch/i386/kernel/reboot_fixups.c
+ *
+ * This is a good place to put board specific reboot fixups.
+ *
+ * List of supported fixups:
+ * geode-gx1/cs5530a - Jaya Kumar <jayalk@intworks.biz>
+ *
+ */
+
+#include <asm/delay.h>
+#include <linux/pci.h>
+
+static void cs5530a_warm_reset(struct pci_dev *dev)
+{
+        /* writing 1 to the reset control register, 0x44 causes the
+        cs5530a to perform a system warm reset */
+        pci_write_config_byte(dev, 0x44, 0x1);
+        udelay(50); /* shouldn't get here but be safe and spin-a-while */
+        return;
+}
+
+struct device_fixup {
+        unsigned int vendor;
+        unsigned int device;
+        void (*reboot_fixup)(struct pci_dev *);
+};
+
+static struct device_fixup fixups_table[] = {
+{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+};
+
+/*
+ * we see if any fixup is available for our current hardware. if there
+ * is a fixup, we call it and we expect to never return from it. if we
+ * do return, we keep looking and then eventually fall back to the
+ * standard mach_reboot on return.
+ */
+void mach_reboot_fixups(void)
+{
+        struct device_fixup *cur;
+        struct pci_dev *dev;
+        int i;
+
+        for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) {
+                cur = &(fixups_table[i]);
+                dev = pci_get_device(cur->vendor, cur->device, 0);
+                if (!dev)
+                        continue;
+
+                cur->reboot_fixup(dev);
+        }
+
+        printk(KERN_WARNING "No reboot fixup found for your hardware\n");
+}
+
diff --git a/include/linux/reboot_fixups.h b/include/linux/reboot_fixups.h
new file mode 100644
index 000000000000..480ea2d489d8
--- /dev/null
+++ b/include/linux/reboot_fixups.h
@@ -0,0 +1,10 @@
+#ifndef _LINUX_REBOOT_FIXUPS_H
+#define _LINUX_REBOOT_FIXUPS_H
+
+#ifdef CONFIG_X86_REBOOTFIXUPS
+extern void mach_reboot_fixups(void);
+#else
+#define mach_reboot_fixups() ((void)(0))
+#endif
+
+#endif /* _LINUX_REBOOT_FIXUPS_H */