4 files changed, 140 insertions, 71 deletions

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d3260542b943..d440e5f456ad 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI         evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+        int ret = 0;
+
+        if (rate <= 0)
+                return ret;
+
+        if (enable) {
+                ret = clk_set_rate(clk, rate);
+                if (0 == ret)
+                        ret = clk_enable(clk);
+        } else {
+                clk_disable(clk);
+        }
+
+        return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+        return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
 
-static int fsi_set_rate(int is_porta, int rate)
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+        struct clk *fsia_ick;
+        struct clk *fsiack;
+        int ret = -EIO;
+
+        fsia_ick = clk_get(dev, "icka");
+        if (IS_ERR(fsia_ick))
+                return PTR_ERR(fsia_ick);
+
+        /*
+         * FSIACK is connected to AK4642,
+         * and use external clock pin from it.
+         * it is parent of fsia_ick now.
+         */
+        fsiack = clk_get_parent(fsia_ick);
+        if (!fsiack)
+                goto fsia_ick_out;
+
+        /*
+         * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+         *
+         ** FIXME **
+         * Because the freq_table of external clk (fsiack) are all 0,
+         * the return value of clk_round_rate became 0.
+         * So, it use __fsi_set_rate here.
+         */
+        ret = __fsi_set_rate(fsiack, rate, enable);
+        if (ret < 0)
+                goto fsiack_out;
+
+        ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+        if ((ret < 0) && enable)
+                __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+        clk_put(fsiack);
+
+fsia_ick_out:
+        clk_put(fsia_ick);
+
+        return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
         struct clk *fsib_clk;
         struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+        long fsib_rate = 0;
+        long fdiv_rate = 0;
+        int ackmd_bpfmd;
         int ret;
 
-        /* set_rate is not needed if port A */
-        if (is_porta)
-                return 0;
-
-        fsib_clk = clk_get(NULL, "fsib_clk");
-        if (IS_ERR(fsib_clk))
-                return -EINVAL;
-
         switch (rate) {
         case 44100:
-                clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-                ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+                fsib_rate       = rate * 256;
+                ackmd_bpfmd     = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
                 break;
         case 48000:
-                clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-                clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-                ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+                fsib_rate       = 85428000; /* around 48kHz x 256 x 7 */
+                fdiv_rate       = rate * 256;
+                ackmd_bpfmd     = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
                 break;
         default:
                 pr_err("unsupported rate in FSI2 port B\n");
-                ret = -EINVAL;
-                break;
+                return -EINVAL;
         }
 
+        /* FSI B setting */
+        fsib_clk = clk_get(dev, "ickb");
+        if (IS_ERR(fsib_clk))
+                return -EIO;
+
+        ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
         clk_put(fsib_clk);
+        if (ret < 0)
+                return ret;
+
+        /* FSI DIV setting */
+        ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+        if (ret < 0) {
+                /* disable FSI B */
+                if (enable)
+                        __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+                return ret;
+        }
+
+        return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+        int ret;
+
+        if (is_porta)
+                ret = fsi_ak4642_set_rate(dev, rate, enable);
+        else
+                ret = fsi_hdmi_set_rate(dev, rate, enable);
 
         return ret;
 }
@@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
                 goto out;
         }
 
+        ret = clk_enable(&sh7372_pllc2_clk);
+        if (ret < 0) {
+                pr_err("Cannot enable pllc2 clock\n");
+                goto out;
+        }
         pr_debug("PLLC2 set frequency %lu\n", rate);
 
         ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@ out:
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
         struct clk *fsia_ick;
         int ret;
 
-        /*
-         * FSIACK is connected to AK4642,
-         * and the rate is depend on playing sound rate.
-         * So, set dummy rate (= 48k) here
-         */
-        ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-        if (ret < 0) {
-                pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-                return ret;
-        }
-
         fsia_ick = clk_get(&fsi_device.dev, "icka");
         if (IS_ERR(fsia_ick)) {
                 ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
         }
 
         ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-        if (ret < 0) {
-                pr_err("Cannot set FSI-A parent: %d\n", ret);
-                goto out;
-        }
-
-        ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
         if (ret < 0)
-                pr_err("Cannot set FSI-A rate: %d\n", ret);
+                pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
         clk_put(fsia_ick);
 
         return ret;
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index b25ce90a346e..3aa026069435 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -229,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate)
         if (idx < 0)
                 return idx;
 
-        if (rate == clk->parent->rate) {
-                pllc2_disable(clk);
-                return 0;
-        }
+        if (rate == clk->parent->rate)
+                return -EINVAL;
 
         value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-        if (value & 0x80000000)
-                pllc2_disable(clk);
-
         __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-        if (value & 0x80000000)
-                return pllc2_enable(clk);
-
         return 0;
 }
 
@@ -452,10 +444,8 @@ static int fsidiv_enable(struct clk *clk)
         unsigned long value;
 
         value  = __raw_readl(clk->mapping->base) >> 16;
-        if (value < 2) {
-                fsidiv_disable(clk);
-                return -ENOENT;
-        }
+        if (value < 2)
+                return -EIO;
 
         __raw_writel((value << 16) | 0x3, clk->mapping->base);
 
@@ -466,17 +456,12 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
         int idx;
 
-        if (clk->parent->rate == rate) {
-                fsidiv_disable(clk);
-                return 0;
-        }
-
         idx = (clk->parent->rate / rate) & 0xffff;
         if (idx < 2)
-                return -ENOENT;
+                return -EINVAL;
 
         __raw_writel(idx << 16, clk->mapping->base);
-        return fsidiv_enable(clk);
+        return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
@@ -607,8 +592,6 @@ static struct clk_lookup lookups[] = {
         CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
         CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
         CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-        CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-        CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
         CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
         CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
         CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -645,8 +628,8 @@ static struct clk_lookup lookups[] = {
         CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
         CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
         CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-        CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
-        CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+        CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+        CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
         CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
         CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
         CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index fa60cbda90a4..d79894192ae3 100644
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -85,7 +85,9 @@
  *     ACK_MD (FSI2)
  *     CKG1   (FSI)
  *
- * err:  return value < 0
+ * err          : return value <  0
+ * no change    : return value == 0
+ * change xMD   : return value >  0
  *
  * 0x-00000AB
  *
@@ -111,7 +113,7 @@
 struct sh_fsi_platform_info {
         unsigned long porta_flags;
         unsigned long portb_flags;
-        int (*set_rate)(int is_porta, int rate); /* for master mode */
+        int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 };
 
 #endif /* __SOUND_FSI_H */
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 507e709f2807..4c2404b1b862 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -132,6 +132,8 @@ struct fsi_priv {
         struct fsi_stream playback;
         struct fsi_stream capture;
 
+        long rate;
+
         u32 mst_ctrl;
 };
 
@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
 {
         struct fsi_priv *fsi = fsi_get_priv(substream);
         int is_play = fsi_is_play(substream);
+        struct fsi_master *master = fsi_get_master(fsi);
+        int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 
         fsi_irq_disable(fsi, is_play);
         fsi_clk_ctrl(fsi, 0);
 
+        set_rate = master->info->set_rate;
+        if (set_rate && fsi->rate)
+                set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+        fsi->rate = 0;
+
         pm_runtime_put_sync(dai->dev);
 }
 
@@ -891,20 +900,20 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 {
         struct fsi_priv *fsi = fsi_get_priv(substream);
         struct fsi_master *master = fsi_get_master(fsi);
-        int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+        int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
         int fsi_ver = master->core->ver;
-        int is_play = fsi_is_play(substream);
+        long rate = params_rate(params);
         int ret;
 
-        /* if slave mode, set_rate is not needed */
-        if (!fsi_is_master_mode(fsi, is_play))
+        set_rate = master->info->set_rate;
+        if (!set_rate)
                 return 0;
 
-        /* it is error if no set_rate */
-        if (!set_rate)
-                return -EIO;
+        ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+        if (ret < 0) /* error */
+                return ret;
 
-        ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+        fsi->rate = rate;
         if (ret > 0) {
                 u32 data = 0;