22 files changed, 184 insertions, 168 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index d4e41ef86aa5..a991aeb56091 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void)
                 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = 57,
@@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void)
         board_flash_init(sdp_flash_partitions, chip_sel_3430);
         sdp3430_display_init();
         enable_board_wakeup_source();
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 62645640f5e4..03fd8aca3cc8 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void)
                 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = 126,
@@ -211,7 +211,7 @@ static void __init omap_sdp_init(void)
         board_smc91x_init();
         board_flash_init(sdp_flash_partitions, chip_sel_sdp);
         enable_board_wakeup_source();
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9cf8e333255f..0e1609d3fa85 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -251,10 +251,10 @@ static void __init omap_4430sdp_init_irq(void)
         gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0]   = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1]   = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[2]   = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0]   = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1]   = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[2]   = OMAP_USBHS_PORT_MODE_UNUSED,
         .phy_reset      = false,
         .reset_gpio_port[0]  = -EINVAL,
         .reset_gpio_port[1]  = -EINVAL,
@@ -584,7 +584,7 @@ static void __init omap_4430sdp_init(void)
         else
                 gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
 
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         usb_musb_init(&musb_board_data);
 
         status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 71acb5ab281c..1b825a00c5b0 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void)
         omap_init_irq();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = GPIO_USB_NRESET,
@@ -103,7 +103,7 @@ static void __init am3517_crane_init(void)
                 return;
         }
 
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 10d60b7743cf..f5bc1c6ccf5e 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void)
         usb_musb_init(&musb_board_data);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
                 defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 #else
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = 57,
@@ -502,7 +502,7 @@ static void __init am3517_evm_init(void)
 
         /* Configure GPIO for EHCI port */
         omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
         /* DSS */
         am3517_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index dac141610666..c79aa9be72f7 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = {
         {}      /* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
@@ -810,7 +810,7 @@ static void __init cm_t35_init(void)
         cm_t35_init_display();
 
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8f9a64d650ee..8288a0b9159e 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO       (147)
 #define USB_HUB_RESET_GPIO      (152)
 
-static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 9a2a31e011ce..e0131dda5792 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = {
         .power                  = 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = -EINVAL,
@@ -803,7 +803,7 @@ static void __init devkit8000_init(void)
         devkit8000_ads7846_init();
 
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         devkit8000_flash_init();
 
         /* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3be85a1f55f4..a9d7d1dc63ab 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = {
         .power                  = 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset = true,
         .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
@@ -699,7 +699,7 @@ static void __init igep2_init(void)
         platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
         omap_serial_init();
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 
         igep2_flash_init();
         igep2_leds_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 4dc62a9b9cb2..1b441eafdba7 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void)
 void __init igep3_wifi_bt_init(void) {}
 #endif
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset = true,
         .reset_gpio_port[0] = -EINVAL,
@@ -435,7 +435,7 @@ static void __init igep3_init(void)
         platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
         omap_serial_init();
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 
         igep3_flash_init();
         igep3_leds_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 46d814ab5656..b84a6418ec1e 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void)
         }
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = -EINVAL,
@@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void)
         gpio_direction_output(170, true);
 
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         omap3beagle_flash_init();
 
         /* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 323c3809ce39..ed5e4118147d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
         &omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         /* PHY reset GPIO will be runtime programmed based on EVM version */
@@ -700,7 +700,7 @@ static void __init omap3_evm_init(void)
 
                 /* setup EHCI phy reset config */
                 omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-                ehci_pdata.reset_gpio_port[1] = 21;
+                usbhs_bdata.reset_gpio_port[1] = 21;
 
                 /* EVM REV >= E can supply 500mA with EXTVBUS programming */
                 musb_board_data.power = 500;
@@ -708,10 +708,10 @@ static void __init omap3_evm_init(void)
         } else {
                 /* setup EHCI phy reset on MDC */
                 omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-                ehci_pdata.reset_gpio_port[1] = 135;
+                usbhs_bdata.reset_gpio_port[1] = 135;
         }
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         ads7846_dev_init();
         omap3evm_init_smsc911x();
         omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 0b34beded11f..241e632a4662 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
         &pandora_vwlan_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = 16,
@@ -716,7 +716,7 @@ static void __init omap3pandora_init(void)
         spi_register_board_info(omap3pandora_spi_board_info,
                         ARRAY_SIZE(omap3pandora_spi_board_info));
         omap3pandora_ads7846_init();
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         usb_musb_init(&musb_board_data);
         gpmc_nand_init(&pandora_nand_data);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 2a2dad447e86..eaad924b6244 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
         &keys_gpio,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset = true,
         .reset_gpio_port[0] = -EINVAL,
@@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void)
 
         omap_serial_init();
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         ads7846_dev_init();
 
         omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index db1f74fe6c4f..4e3a1ae2ac96 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void)
         }
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = -EINVAL,
@@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void)
                                 ARRAY_SIZE(omap3_ads7846_spi_board_info));
         omap3_ads7846_init();
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         omap3touchbook_flash_init();
 
         /* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 77748f813667..b88c1909434a 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void)
         gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
         .phy_reset  = false,
         .reset_gpio_port[0]  = -EINVAL,
         .reset_gpio_port[1]  = -EINVAL,
@@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void)
         gpio_set_value(GPIO_HUB_NRESET, 0);
         gpio_set_value(GPIO_HUB_NRESET, 1);
 
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
 
         /* enable power to hub */
         gpio_set_value(GPIO_HUB_POWER, 1);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index cb26e5d8268d..f78b74c369df 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = {
         &overo_lcd_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = -EINVAL,
@@ -454,7 +454,7 @@ static void __init overo_init(void)
         omap_serial_init();
         overo_flash_init();
         usb_musb_init(&musb_board_data);
-        usb_ehci_init(&ehci_pdata);
+        usb_ehci_init(&usbhs_bdata);
         overo_ads7846_init();
         overo_init_smsc911x();
 
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index e26754c24ee8..19b99128df76 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = {
         },
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-        .port_mode[0]           = EHCI_HCD_OMAP_MODE_UNKNOWN,
-        .port_mode[1]           = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[2]           = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+        .port_mode[0]           = OMAP_USBHS_PORT_MODE_UNUSED,
+        .port_mode[1]           = OMAP_EHCI_PORT_MODE_PHY,
+        .port_mode[2]           = OMAP_USBHS_PORT_MODE_UNUSED,
         .phy_reset              = true,
         .reset_gpio_port[0]     = -EINVAL,
         .reset_gpio_port[1]     = ZOOM3_EHCI_RESET_GPIO,
@@ -123,7 +123,7 @@ static void __init omap_zoom_init(void)
         } else if (machine_is_omap_zoom3()) {
                 omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
                 omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-                usb_ehci_init(&ehci_pdata);
+                usb_ehci_init(&usbhs_bdata);
         }
 
         board_nand_init(zoom_nand_partitions,
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 45f9b80b6d20..b04ce6f8f013 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -64,10 +64,10 @@ static struct platform_device ehci_device = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
         switch (port_mode[0]) {
-        case EHCI_HCD_OMAP_MODE_PHY:
+        case OMAP_EHCI_PORT_MODE_PHY:
                 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
                 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
                 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -81,7 +81,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
                 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case EHCI_HCD_OMAP_MODE_TLL:
+        case OMAP_EHCI_PORT_MODE_TLL:
                 omap_mux_init_signal("hsusb1_tll_stp",
                         OMAP_PIN_INPUT_PULLUP);
                 omap_mux_init_signal("hsusb1_tll_clk",
@@ -107,14 +107,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("hsusb1_tll_data7",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case EHCI_HCD_OMAP_MODE_UNKNOWN:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
                 /* FALLTHROUGH */
         default:
                 break;
         }
 
         switch (port_mode[1]) {
-        case EHCI_HCD_OMAP_MODE_PHY:
+        case OMAP_EHCI_PORT_MODE_PHY:
                 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
                 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
                 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -136,7 +136,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("hsusb2_data7",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case EHCI_HCD_OMAP_MODE_TLL:
+        case OMAP_EHCI_PORT_MODE_TLL:
                 omap_mux_init_signal("hsusb2_tll_stp",
                         OMAP_PIN_INPUT_PULLUP);
                 omap_mux_init_signal("hsusb2_tll_clk",
@@ -162,17 +162,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("hsusb2_tll_data7",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case EHCI_HCD_OMAP_MODE_UNKNOWN:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
                 /* FALLTHROUGH */
         default:
                 break;
         }
 
         switch (port_mode[2]) {
-        case EHCI_HCD_OMAP_MODE_PHY:
+        case OMAP_EHCI_PORT_MODE_PHY:
                 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
                 break;
-        case EHCI_HCD_OMAP_MODE_TLL:
+        case OMAP_EHCI_PORT_MODE_TLL:
                 omap_mux_init_signal("hsusb3_tll_stp",
                         OMAP_PIN_INPUT_PULLUP);
                 omap_mux_init_signal("hsusb3_tll_clk",
@@ -198,7 +198,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("hsusb3_tll_data7",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case EHCI_HCD_OMAP_MODE_UNKNOWN:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
                 /* FALLTHROUGH */
         default:
                 break;
@@ -207,10 +207,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
         return;
 }
 
-static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
         switch (port_mode[0]) {
-        case EHCI_HCD_OMAP_MODE_PHY:
+        case OMAP_EHCI_PORT_MODE_PHY:
                 omap_mux_init_signal("usbb1_ulpiphy_stp",
                         OMAP_PIN_OUTPUT);
                 omap_mux_init_signal("usbb1_ulpiphy_clk",
@@ -236,7 +236,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("usbb1_ulpiphy_dat7",
                         OMAP_PIN_INPUT_PULLDOWN);
                         break;
-        case EHCI_HCD_OMAP_MODE_TLL:
+        case OMAP_EHCI_PORT_MODE_TLL:
                 omap_mux_init_signal("usbb1_ulpitll_stp",
                         OMAP_PIN_INPUT_PULLUP);
                 omap_mux_init_signal("usbb1_ulpitll_clk",
@@ -262,12 +262,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("usbb1_ulpitll_dat7",
                         OMAP_PIN_INPUT_PULLDOWN);
                         break;
-        case EHCI_HCD_OMAP_MODE_UNKNOWN:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
         default:
                         break;
         }
         switch (port_mode[1]) {
-        case EHCI_HCD_OMAP_MODE_PHY:
+        case OMAP_EHCI_PORT_MODE_PHY:
                 omap_mux_init_signal("usbb2_ulpiphy_stp",
                         OMAP_PIN_OUTPUT);
                 omap_mux_init_signal("usbb2_ulpiphy_clk",
@@ -293,7 +293,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("usbb2_ulpiphy_dat7",
                         OMAP_PIN_INPUT_PULLDOWN);
                         break;
-        case EHCI_HCD_OMAP_MODE_TLL:
+        case OMAP_EHCI_PORT_MODE_TLL:
                 omap_mux_init_signal("usbb2_ulpitll_stp",
                         OMAP_PIN_INPUT_PULLUP);
                 omap_mux_init_signal("usbb2_ulpitll_clk",
@@ -319,13 +319,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
                 omap_mux_init_signal("usbb2_ulpitll_dat7",
                         OMAP_PIN_INPUT_PULLDOWN);
                         break;
-        case EHCI_HCD_OMAP_MODE_UNKNOWN:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
         default:
                         break;
         }
 }
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata)
 {
         platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
@@ -363,7 +363,7 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata)
 
 {
 }
@@ -411,7 +411,7 @@ static struct platform_device ohci_device = {
         .resource       = ohci_resources,
 };
 
-static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
         switch (port_mode[0]) {
         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -439,7 +439,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
                 omap_mux_init_signal("mm1_txdat",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case OMAP_OHCI_PORT_MODE_UNUSED:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
                 /* FALLTHROUGH */
         default:
                 break;
@@ -470,7 +470,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
                 omap_mux_init_signal("mm2_txdat",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case OMAP_OHCI_PORT_MODE_UNUSED:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
                 /* FALLTHROUGH */
         default:
                 break;
@@ -501,14 +501,14 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
                 omap_mux_init_signal("mm3_txdat",
                         OMAP_PIN_INPUT_PULLDOWN);
                 break;
-        case OMAP_OHCI_PORT_MODE_UNUSED:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
                 /* FALLTHROUGH */
         default:
                 break;
         }
 }
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata)
 {
         platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
 
@@ -524,7 +524,7 @@ void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata)
 {
 }
 
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index f888e0e57dc8..32dfe08023a4 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -7,15 +7,12 @@
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS      3
-enum ehci_hcd_omap_mode {
-        EHCI_HCD_OMAP_MODE_UNKNOWN,
-        EHCI_HCD_OMAP_MODE_PHY,
-        EHCI_HCD_OMAP_MODE_TLL,
-        EHCI_HCD_OMAP_MODE_HSIC,
-};
 
-enum ohci_omap3_port_mode {
-        OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+        OMAP_USBHS_PORT_MODE_UNUSED,
+        OMAP_EHCI_PORT_MODE_PHY,
+        OMAP_EHCI_PORT_MODE_TLL,
+        OMAP_EHCI_PORT_MODE_HSIC,
         OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
         OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
         OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
         OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
         OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
         OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-        OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+        OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-struct ehci_hcd_omap_platform_data {
-        enum ehci_hcd_omap_mode         port_mode[OMAP3_HS_USB_PORTS];
-        unsigned                        phy_reset:1;
+struct usbhs_omap_board_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
 
         /* have to be valid if phy_reset is true and portx is in phy mode */
         int     reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+        /* Set this to true for ES2.x silicon */
+        unsigned                        es2_compatibility:1;
+
+        unsigned                        phy_reset:1;
+
+        /*
+         * Regulators for USB PHYs.
+         * Each PHY can have a separate regulator.
+         */
+        struct regulator                *regulator[OMAP3_HS_USB_PORTS];
 };
 
-struct ohci_hcd_omap_platform_data {
-        enum ohci_omap3_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+        int                             reset_gpio_port[OMAP3_HS_USB_PORTS];
+        struct regulator                *regulator[OMAP3_HS_USB_PORTS];
+        unsigned                        phy_reset:1;
+};
 
-        /* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
         unsigned                        es2_compatibility:1;
 };
 
+struct usbhs_omap_platform_data {
+        enum usbhs_omap_port_mode               port_mode[OMAP3_HS_USB_PORTS];
+
+        struct ehci_hcd_omap_platform_data      *ehci_data;
+        struct ohci_hcd_omap_platform_data      *ohci_data;
+};
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE                  0xfffb0400
@@ -80,19 +98,17 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata);
 
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
 #endif
 
-
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 15277213f928..18df6c6a5803 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -155,9 +155,9 @@
 #define is_omap_ehci_rev1(x)    (x->omap_ehci_rev == OMAP_EHCI_REV1)
 #define is_omap_ehci_rev2(x)    (x->omap_ehci_rev == OMAP_EHCI_REV2)
 
-#define is_ehci_phy_mode(x)     (x == EHCI_HCD_OMAP_MODE_PHY)
-#define is_ehci_tll_mode(x)     (x == EHCI_HCD_OMAP_MODE_TLL)
-#define is_ehci_hsic_mode(x)    (x == EHCI_HCD_OMAP_MODE_HSIC)
+#define is_ehci_phy_mode(x)     (x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)    (x == OMAP_EHCI_PORT_MODE_HSIC)
 
 /*-------------------------------------------------------------------------*/
 
@@ -220,7 +220,7 @@ struct ehci_hcd_omap {
         u32                     omap_ehci_rev;
 
         /* desired phy_mode: TLL, PHY */
-        enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
 
         void __iomem            *uhh_base;
         void __iomem            *tll_base;
@@ -389,7 +389,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
          */
         if (is_omap_ehci_rev2(omap)) {
                 switch (omap->port_mode[0]) {
-                case EHCI_HCD_OMAP_MODE_PHY:
+                case OMAP_EHCI_PORT_MODE_PHY:
                         omap->xclk60mhsp1_ck = clk_get(omap->dev,
                                                         "xclk60mhsp1_ck");
                         if (IS_ERR(omap->xclk60mhsp1_ck)) {
@@ -413,7 +413,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                                         "Unable to set P1 f-clock\n");
                         }
                         break;
-                case EHCI_HCD_OMAP_MODE_TLL:
+                case OMAP_EHCI_PORT_MODE_TLL:
                         omap->xclk60mhsp1_ck = clk_get(omap->dev,
                                                         "init_60m_fclk");
                         if (IS_ERR(omap->xclk60mhsp1_ck)) {
@@ -463,7 +463,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                         break;
                 }
                 switch (omap->port_mode[1]) {
-                case EHCI_HCD_OMAP_MODE_PHY:
+                case OMAP_EHCI_PORT_MODE_PHY:
                         omap->xclk60mhsp2_ck = clk_get(omap->dev,
                                                         "xclk60mhsp2_ck");
                         if (IS_ERR(omap->xclk60mhsp2_ck)) {
@@ -487,7 +487,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
                                         "Unable to set P2 f-clock\n");
                         }
                         break;
-                case EHCI_HCD_OMAP_MODE_TLL:
+                case OMAP_EHCI_PORT_MODE_TLL:
                         omap->xclk60mhsp2_ck = clk_get(omap->dev,
                                                         "init_60m_fclk");
                         if (IS_ERR(omap->xclk60mhsp2_ck)) {
@@ -591,11 +591,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
         reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
         if (is_omap_ehci_rev1(omap)) {
-                if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+                if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
                         reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-                if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+                if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
                         reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-                if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+                if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
                         reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
                 /* Bypass the TLL module for PHY mode operation */
@@ -656,15 +656,15 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
         ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04,
                                 EHCI_INSNREG04_DISABLE_UNSUSPEND);
 
-        if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
-                (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
-                        (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
+        if ((omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) ||
+                (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) ||
+                        (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)) {
 
-                if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
+                if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL)
                         tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
-                if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
+                if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL)
                         tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
-                if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
+                if (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)
                         tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
                 /* Enable UTMI mode for required TLL channels */
@@ -686,9 +686,9 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
         }
 
         /* Soft reset the PHY using PHY reset command over ULPI */
-        if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+        if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
                 omap_ehci_soft_phy_reset(omap, 0);
-        if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+        if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
                 omap_ehci_soft_phy_reset(omap, 1);
 
         return 0;
@@ -903,7 +903,7 @@ static const struct hc_driver ehci_omap_hc_driver;
  */
 static int ehci_hcd_omap_probe(struct platform_device *pdev)
 {
-        struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+        struct usbhs_omap_board_data *pdata = pdev->dev.platform_data;
         struct ehci_hcd_omap *omap;
         struct resource *res;
         struct usb_hcd *hcd;
@@ -981,7 +981,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
         /* get ehci regulator and enable */
         for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-                if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
+                if (omap->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
                         omap->regulator[i] = NULL;
                         continue;
                 }
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 32f56bbec214..3f9db87fe525 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -141,7 +141,7 @@ struct ohci_hcd_omap3 {
         struct clk              *usbtll_ick;
 
         /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */
-        enum ohci_omap3_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
         void __iomem            *uhh_base;
         void __iomem            *tll_base;
         void __iomem            *ohci_base;
@@ -206,10 +206,10 @@ static int ohci_omap3_start(struct usb_hcd *hcd)
  * convert the port-mode enum to a value we can use in the FSLSMODE
  * field of USBTLL_CHANNEL_CONF
  */
-static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode)
+static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 {
         switch (mode) {
-        case OMAP_OHCI_PORT_MODE_UNUSED:
+        case OMAP_USBHS_PORT_MODE_UNUSED:
         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
                 return 0x0;
 
@@ -266,7 +266,7 @@ static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap)
         for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
 
                 /* Enable only those channels that are actually used */
-                if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED)
+                if (omap->port_mode[i] == OMAP_USBHS_PORT_MODE_UNUSED)
                         continue;
 
                 reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
@@ -382,11 +382,11 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
          *
          * For now, turn off all the Pi_CONNECT_STATUS bits
          *
-        if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+        if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
                 reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-        if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+        if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
                 reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-        if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+        if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
                 reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
          */
         reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
@@ -403,17 +403,17 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
         } else {
                 dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-                if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+                if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
                         reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
                 else
                         reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 
-                if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+                if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
                         reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
                 else
                         reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
 
-                if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+                if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
                         reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
                 else
                         reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
@@ -580,7 +580,7 @@ static const struct hc_driver ohci_omap3_hc_driver = {
  */
 static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 {
-        struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+        struct usbhs_omap_board_data *pdata = pdev->dev.platform_data;
         struct ohci_hcd_omap3 *omap;
         struct resource *res;
         struct usb_hcd *hcd;