1 files changed, 144 insertions, 34 deletions

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index c4a939b506c9..333dc15f8ccf 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -28,7 +28,6 @@
  *
  *  Unsupported but docs exist:
  *      Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
- *      Winbond W83759A
  *
  *  This driver handles legacy (that is "ISA/VLB side") IDE ports found
  *  on PC class systems. There are three hybrid devices that are exceptions
@@ -36,7 +35,7 @@
  *  the MPIIX where the tuning is PCI side but the IDE is "ISA side".
  *
  *  Specific support is included for the ht6560a/ht6560b/opti82c611a/
- *  opti82c465mv/promise 20230c/20630
+ *  opti82c465mv/promise 20230c/20630/winbond83759A
  *
  *  Use the autospeed and pio_mask options with:
  *      Appian ADI/2 aka CLPD7220 or AIC25VL01.
@@ -47,9 +46,6 @@
  *  For now use autospeed and pio_mask as above with the W83759A. This may
  *  change.
  *
- *  TODO
- *      Merge existing pata_qdi driver
- *
  */
 
 #include <linux/kernel.h>
@@ -64,7 +60,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.5"
+#define DRV_VERSION "0.6.5"
 
 #define NR_HOST 6
 
@@ -92,6 +88,7 @@ enum controller {
         QDI6500 = 7,
         QDI6580 = 8,
         QDI6580DP = 9,          /* Dual channel mode is different */
+        W83759A = 10,
 
         UNKNOWN = -1
 };
@@ -111,7 +108,8 @@ struct legacy_controller {
         struct ata_port_operations *ops;
         unsigned int pio_mask;
         unsigned int flags;
-        int (*setup)(struct legacy_probe *probe, struct legacy_data *data);
+        int (*setup)(struct platform_device *, struct legacy_probe *probe,
+                struct legacy_data *data);
 };
 
 static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
@@ -128,6 +126,8 @@ static int ht6560b;		/* HT 6560A on primary 1, second 2, both 3 */
 static int opti82c611a;         /* Opti82c611A on primary 1, sec 2, both 3 */
 static int opti82c46x;          /* Opti 82c465MV present(pri/sec autodetect) */
 static int qdi;                 /* Set to probe QDI controllers */
+static int winbond;             /* Set to probe Winbond controllers,
+                                        give I/O port if non stdanard */
 static int autospeed;           /* Chip present which snoops speed changes */
 static int pio_mask = 0x1F;     /* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;     /* Use iordy if available */
@@ -891,9 +891,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
         return ata_qc_issue_prot(qc);
 }
 
-/* For the 6580 can we flip the FIFO on/off at this point ? */
-
-static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
                                         unsigned int buflen, int rw)
 {
         struct ata_port *ap = adev->link->ap;
@@ -922,6 +920,15 @@ static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf,
                 return ata_data_xfer(adev, buf, buflen, rw);
 }
 
+static int qdi_port(struct platform_device *dev,
+                        struct legacy_probe *lp, struct legacy_data *ld)
+{
+        if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL)
+                return -EBUSY;
+        ld->timing = lp->private;
+        return 0;
+}
+
 static struct ata_port_operations qdi6500_port_ops = {
         .set_piomode    = qdi6500_set_piomode,
 
@@ -940,7 +947,7 @@ static struct ata_port_operations qdi6500_port_ops = {
         .qc_prep        = ata_qc_prep,
         .qc_issue       = qdi_qc_issue_prot,
 
-        .data_xfer      = qdi_data_xfer,
+        .data_xfer      = vlb32_data_xfer,
 
         .irq_handler    = ata_interrupt,
         .irq_clear      = ata_bmdma_irq_clear,
@@ -967,7 +974,7 @@ static struct ata_port_operations qdi6580_port_ops = {
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
 
-        .data_xfer      = qdi_data_xfer,
+        .data_xfer      = vlb32_data_xfer,
 
         .irq_handler    = ata_interrupt,
         .irq_clear      = ata_bmdma_irq_clear,
@@ -994,7 +1001,7 @@ static struct ata_port_operations qdi6580dp_port_ops = {
         .qc_prep        = ata_qc_prep,
         .qc_issue       = qdi_qc_issue_prot,
 
-        .data_xfer      = qdi_data_xfer,
+        .data_xfer      = vlb32_data_xfer,
 
         .irq_handler    = ata_interrupt,
         .irq_clear      = ata_bmdma_irq_clear,
@@ -1003,6 +1010,97 @@ static struct ata_port_operations qdi6580dp_port_ops = {
         .port_start     = ata_sff_port_start,
 };
 
+static DEFINE_SPINLOCK(winbond_lock);
+
+static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&winbond_lock, flags);
+        outb(reg, port + 0x01);
+        outb(val, port + 0x02);
+        spin_unlock_irqrestore(&winbond_lock, flags);
+}
+
+static u8 winbond_readcfg(unsigned long port, u8 reg)
+{
+        u8 val;
+
+        unsigned long flags;
+        spin_lock_irqsave(&winbond_lock, flags);
+        outb(reg, port + 0x01);
+        val = inb(port + 0x02);
+        spin_unlock_irqrestore(&winbond_lock, flags);
+
+        return val;
+}
+
+static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+        struct ata_timing t;
+        struct legacy_data *winbond = ap->host->private_data;
+        int active, recovery;
+        u8 reg;
+        int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
+
+        reg = winbond_readcfg(winbond->timing, 0x81);
+
+        /* Get the timing data in cycles */
+        if (reg & 0x40)         /* Fast VLB bus, assume 50MHz */
+                ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+        else
+                ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+        active = (FIT(t.active, 3, 17) - 1) & 0x0F;
+        recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+        timing = (active << 4) | recovery;
+        winbond_writecfg(winbond->timing, timing, reg);
+
+        /* Load the setup timing */
+
+        reg = 0x35;
+        if (adev->class != ATA_DEV_ATA)
+                reg |= 0x08;    /* FIFO off */
+        if (!ata_pio_need_iordy(adev))
+                reg |= 0x02;    /* IORDY off */
+        reg |= (FIT(t.setup, 0, 3) << 6);
+        winbond_writecfg(winbond->timing, timing + 1, reg);
+}
+
+static int winbond_port(struct platform_device *dev,
+                        struct legacy_probe *lp, struct legacy_data *ld)
+{
+        if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL)
+                return -EBUSY;
+        ld->timing = lp->private;
+        return 0;
+}
+
+static struct ata_port_operations winbond_port_ops = {
+        .set_piomode    = winbond_set_piomode,
+
+        .tf_load        = ata_tf_load,
+        .tf_read        = ata_tf_read,
+        .check_status   = ata_check_status,
+        .exec_command   = ata_exec_command,
+        .dev_select     = ata_std_dev_select,
+
+        .freeze         = ata_bmdma_freeze,
+        .thaw           = ata_bmdma_thaw,
+        .error_handler  = ata_bmdma_error_handler,
+        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+        .cable_detect   = ata_cable_40wire,
+
+        .qc_prep        = ata_qc_prep,
+        .qc_issue       = ata_qc_issue_prot,
+
+        .data_xfer      = vlb32_data_xfer,
+
+        .irq_clear      = ata_bmdma_irq_clear,
+        .irq_on         = ata_irq_on,
+
+        .port_start     = ata_sff_port_start,
+};
+
 static struct legacy_controller controllers[] = {
         {"BIOS",        &legacy_port_ops,       0x1F,
                                                 ATA_FLAG_NO_IORDY,      NULL },
@@ -1019,11 +1117,13 @@ static struct legacy_controller controllers[] = {
         {"OPTI82C46X",  &opti82c46x_port_ops,   0x0F,
                                                 0              ,        NULL },
         {"QDI6500",     &qdi6500_port_ops,      0x07,
-                                                ATA_FLAG_NO_IORDY,      NULL },
+                                        ATA_FLAG_NO_IORDY,      qdi_port },
         {"QDI6580",     &qdi6580_port_ops,      0x1F,
-                                                0              ,        NULL },
+                                        0              ,        qdi_port },
         {"QDI6580DP",   &qdi6580dp_port_ops,    0x1F,
-                                                0              ,        NULL }
+                                        0              ,        qdi_port },
+        {"W83759A",     &winbond_port_ops,      0x1F,
+                                        0              ,        winbond_port }
 };
 
 /**
@@ -1034,10 +1134,26 @@ static struct legacy_controller controllers[] = {
  *      check if the controller appears to be driveless at this point.
  */
 
-static int probe_chip_type(struct legacy_probe *probe)
+static __init int probe_chip_type(struct legacy_probe *probe)
 {
         int mask = 1 << probe->slot;
 
+        if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) {
+                u8 reg = winbond_readcfg(winbond, 0x81);
+                reg |= 0x80;    /* jumpered mode off */
+                winbond_writecfg(winbond, 0x81, reg);
+                reg = winbond_readcfg(winbond, 0x83);
+                reg |= 0xF0;    /* local control */
+                winbond_writecfg(winbond, 0x83, reg);
+                reg = winbond_readcfg(winbond, 0x85);
+                reg |= 0xF0;    /* programmable timing */
+                winbond_writecfg(winbond, 0x85, reg);
+
+                reg = winbond_readcfg(winbond, 0x81);
+
+                if (reg & mask)
+                        return W83759A;
+        }
         if (probe->port == 0x1F0) {
                 unsigned long flags;
                 local_irq_save(flags);
@@ -1127,7 +1243,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
         if (!io_addr || !ctrl_addr)
                 goto fail;
         if (controller->setup)
-                if (controller->setup(probe, ld) < 0)
+                if (controller->setup(pdev, probe, ld) < 0)
                         goto fail;
         host = ata_host_alloc(&pdev->dev, 1);
         if (!host)
@@ -1141,7 +1257,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
         ap->ioaddr.altstatus_addr = ctrl_addr;
         ap->ioaddr.ctl_addr = ctrl_addr;
         ata_std_ports(&ap->ioaddr);
-        ap->private_data = ld;
+        ap->host->private_data = ld;
 
         ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
 
@@ -1164,9 +1280,6 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 fail:
         if (host)
                 ata_host_detach(host);
-        /* FIXME: use devm for this */
-        if (ld->timing)
-                release_region(ld->timing, 2);
         platform_device_unregister(pdev);
         return ret;
 }
@@ -1184,7 +1297,7 @@ fail:
  *      is the right driver anyway.
  */
 
-static void legacy_check_special_cases(struct pci_dev *p, int *primary,
+static void __init legacy_check_special_cases(struct pci_dev *p, int *primary,
                                                                 int *secondary)
 {
         /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
@@ -1249,11 +1362,9 @@ static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
         /* Check card type */
         if ((r & 0xF0) == 0xC0) {
                 /* QD6500: single channel */
-                if (r & 8) {
+                if (r & 8)
                         /* Disabled ? */
-                        release_region(port, 2);
                         return;
-                }
                 legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
                                                                 QDI6500, port);
         }
@@ -1273,6 +1384,7 @@ static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
                         /* port + 0x02, r & 0x04 */
                         legacy_probe_add(0x170, 15, QDI6580DP, port + 2);
                 }
+                release_region(port + 2, 2);
         }
 }
 
@@ -1315,11 +1427,9 @@ static __init void probe_qdi_vlb(void)
                         r = inb(port + 1);
                         udelay(1);
                         /* Check port agrees with port set */
-                        if ((r & 2) >> 1 != i) {
-                                release_region(port, 2);
-                                continue;
-                        }
-                        qdi65_identify_port(r, res, port);
+                        if ((r & 2) >> 1 == i)
+                                qdi65_identify_port(r, res, port);
+                        release_region(port, 2);
                 }
         }
 }
@@ -1365,6 +1475,9 @@ static __init int legacy_init(void)
                 pci_present = 1;
         }
 
+        if (winbond == 1)
+                winbond = 0x130;        /* Default port, alt is 1B0 */
+
         if (primary == 0 || all)
                 legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
         if (secondary == 0 || all)
@@ -1383,7 +1496,6 @@ static __init int legacy_init(void)
         if (qdi)
                 probe_qdi_vlb();
 
-
         for (i = 0; i < NR_HOST; i++, pl++) {
                 if (pl->port == 0)
                         continue;
@@ -1406,8 +1518,6 @@ static __exit void legacy_exit(void)
                 struct legacy_data *ld = &legacy_data[i];
                 ata_host_detach(legacy_host[i]);
                 platform_device_unregister(ld->platform_dev);
-                if (ld->timing)
-                        release_region(ld->timing, 2);
         }
 }