diff options
153 files changed, 7834 insertions, 3746 deletions
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt new file mode 100644 index 000000000000..074f4be6667f --- /dev/null +++ b/Documentation/arm/tcm.txt | |||
| @@ -0,0 +1,145 @@ | |||
| 1 | ARM TCM (Tightly-Coupled Memory) handling in Linux | ||
| 2 | ---- | ||
| 3 | Written by Linus Walleij <linus.walleij@stericsson.com> | ||
| 4 | |||
| 5 | Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory). | ||
| 6 | This is usually just a few (4-64) KiB of RAM inside the ARM | ||
| 7 | processor. | ||
| 8 | |||
| 9 | Due to being embedded inside the CPU The TCM has a | ||
| 10 | Harvard-architecture, so there is an ITCM (instruction TCM) | ||
| 11 | and a DTCM (data TCM). The DTCM can not contain any | ||
| 12 | instructions, but the ITCM can actually contain data. | ||
| 13 | The size of DTCM or ITCM is minimum 4KiB so the typical | ||
| 14 | minimum configuration is 4KiB ITCM and 4KiB DTCM. | ||
| 15 | |||
| 16 | ARM CPU:s have special registers to read out status, physical | ||
| 17 | location and size of TCM memories. arch/arm/include/asm/cputype.h | ||
| 18 | defines a CPUID_TCM register that you can read out from the | ||
| 19 | system control coprocessor. Documentation from ARM can be found | ||
| 20 | at http://infocenter.arm.com, search for "TCM Status Register" | ||
| 21 | to see documents for all CPUs. Reading this register you can | ||
| 22 | determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the | ||
| 23 | machine. | ||
| 24 | |||
| 25 | There is further a TCM region register (search for "TCM Region | ||
| 26 | Registers" at the ARM site) that can report and modify the location | ||
| 27 | size of TCM memories at runtime. This is used to read out and modify | ||
| 28 | TCM location and size. Notice that this is not a MMU table: you | ||
| 29 | actually move the physical location of the TCM around. At the | ||
| 30 | place you put it, it will mask any underlying RAM from the | ||
| 31 | CPU so it is usually wise not to overlap any physical RAM with | ||
| 32 | the TCM. The TCM memory exists totally outside the MMU and will | ||
| 33 | override any MMU mappings. | ||
| 34 | |||
| 35 | Code executing inside the ITCM does not "see" any MMU mappings | ||
| 36 | and e.g. register accesses must be made to physical addresses. | ||
| 37 | |||
| 38 | TCM is used for a few things: | ||
| 39 | |||
| 40 | - FIQ and other interrupt handlers that need deterministic | ||
| 41 | timing and cannot wait for cache misses. | ||
| 42 | |||
| 43 | - Idle loops where all external RAM is set to self-refresh | ||
| 44 | retention mode, so only on-chip RAM is accessible by | ||
| 45 | the CPU and then we hang inside ITCM waiting for an | ||
| 46 | interrupt. | ||
| 47 | |||
| 48 | - Other operations which implies shutting off or reconfiguring | ||
| 49 | the external RAM controller. | ||
| 50 | |||
| 51 | There is an interface for using TCM on the ARM architecture | ||
| 52 | in <asm/tcm.h>. Using this interface it is possible to: | ||
| 53 | |||
| 54 | - Define the physical address and size of ITCM and DTCM. | ||
| 55 | |||
| 56 | - Tag functions to be compiled into ITCM. | ||
| 57 | |||
| 58 | - Tag data and constants to be allocated to DTCM and ITCM. | ||
| 59 | |||
| 60 | - Have the remaining TCM RAM added to a special | ||
| 61 | allocation pool with gen_pool_create() and gen_pool_add() | ||
| 62 | and provice tcm_alloc() and tcm_free() for this | ||
| 63 | memory. Such a heap is great for things like saving | ||
| 64 | device state when shutting off device power domains. | ||
| 65 | |||
| 66 | A machine that has TCM memory shall select HAVE_TCM in | ||
| 67 | arch/arm/Kconfig for itself, and then the | ||
| 68 | rest of the functionality will depend on the physical | ||
| 69 | location and size of ITCM and DTCM to be defined in | ||
| 70 | mach/memory.h for the machine. Code that needs to use | ||
| 71 | TCM shall #include <asm/tcm.h> If the TCM is not located | ||
| 72 | at the place given in memory.h it will be moved using | ||
| 73 | the TCM Region registers. | ||
| 74 | |||
| 75 | Functions to go into itcm can be tagged like this: | ||
| 76 | int __tcmfunc foo(int bar); | ||
| 77 | |||
| 78 | Variables to go into dtcm can be tagged like this: | ||
| 79 | int __tcmdata foo; | ||
| 80 | |||
| 81 | Constants can be tagged like this: | ||
| 82 | int __tcmconst foo; | ||
| 83 | |||
| 84 | To put assembler into TCM just use | ||
| 85 | .section ".tcm.text" or .section ".tcm.data" | ||
| 86 | respectively. | ||
| 87 | |||
| 88 | Example code: | ||
| 89 | |||
| 90 | #include <asm/tcm.h> | ||
| 91 | |||
| 92 | /* Uninitialized data */ | ||
| 93 | static u32 __tcmdata tcmvar; | ||
| 94 | /* Initialized data */ | ||
| 95 | static u32 __tcmdata tcmassigned = 0x2BADBABEU; | ||
| 96 | /* Constant */ | ||
| 97 | static const u32 __tcmconst tcmconst = 0xCAFEBABEU; | ||
| 98 | |||
| 99 | static void __tcmlocalfunc tcm_to_tcm(void) | ||
| 100 | { | ||
| 101 | int i; | ||
| 102 | for (i = 0; i < 100; i++) | ||
| 103 | tcmvar ++; | ||
| 104 | } | ||
| 105 | |||
| 106 | static void __tcmfunc hello_tcm(void) | ||
| 107 | { | ||
| 108 | /* Some abstract code that runs in ITCM */ | ||
| 109 | int i; | ||
| 110 | for (i = 0; i < 100; i++) { | ||
| 111 | tcmvar ++; | ||
| 112 | } | ||
| 113 | tcm_to_tcm(); | ||
| 114 | } | ||
| 115 | |||
| 116 | static void __init test_tcm(void) | ||
| 117 | { | ||
| 118 | u32 *tcmem; | ||
| 119 | int i; | ||
| 120 | |||
| 121 | hello_tcm(); | ||
| 122 | printk("Hello TCM executed from ITCM RAM\n"); | ||
| 123 | |||
| 124 | printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); | ||
| 125 | tcmvar = 0xDEADBEEFU; | ||
| 126 | printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); | ||
| 127 | |||
| 128 | printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); | ||
| 129 | |||
| 130 | printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); | ||
| 131 | |||
| 132 | /* Allocate some TCM memory from the pool */ | ||
| 133 | tcmem = tcm_alloc(20); | ||
| 134 | if (tcmem) { | ||
| 135 | printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); | ||
| 136 | tcmem[0] = 0xDEADBEEFU; | ||
| 137 | tcmem[1] = 0x2BADBABEU; | ||
| 138 | tcmem[2] = 0xCAFEBABEU; | ||
| 139 | tcmem[3] = 0xDEADBEEFU; | ||
| 140 | tcmem[4] = 0x2BADBABEU; | ||
| 141 | for (i = 0; i < 5; i++) | ||
| 142 | printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); | ||
| 143 | tcm_free(tcmem, 20); | ||
| 144 | } | ||
| 145 | } | ||
diff --git a/MAINTAINERS b/MAINTAINERS index e797c4d48cf1..c450f3abb8c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS | |||
| @@ -683,7 +683,7 @@ S: Maintained | |||
| 683 | ARM/INTEL IXP4XX ARM ARCHITECTURE | 683 | ARM/INTEL IXP4XX ARM ARCHITECTURE |
| 684 | M: Imre Kaloz <kaloz@openwrt.org> | 684 | M: Imre Kaloz <kaloz@openwrt.org> |
| 685 | M: Krzysztof Halasa <khc@pm.waw.pl> | 685 | M: Krzysztof Halasa <khc@pm.waw.pl> |
| 686 | L: linux-arm-kernel@lists.infradead.org | 686 | L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) |
| 687 | S: Maintained | 687 | S: Maintained |
| 688 | F: arch/arm/mach-ixp4xx/ | 688 | F: arch/arm/mach-ixp4xx/ |
| 689 | 689 | ||
| @@ -740,18 +740,22 @@ M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> | |||
| 740 | M: Dirk Opfer <dirk@opfer-online.de> | 740 | M: Dirk Opfer <dirk@opfer-online.de> |
| 741 | S: Maintained | 741 | S: Maintained |
| 742 | 742 | ||
| 743 | ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT | 743 | ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT |
| 744 | M: Marek Vasut <marek.vasut@gmail.com> | 744 | P: Marek Vasut |
| 745 | M: marek.vasut@gmail.com | ||
| 746 | L: linux-arm-kernel@lists.infradead.org | ||
| 745 | W: http://hackndev.com | 747 | W: http://hackndev.com |
| 746 | S: Maintained | 748 | S: Maintained |
| 747 | 749 | ||
| 748 | ARM/PALM TREO 680 SUPPORT | 750 | ARM/PALM TREO 680 SUPPORT |
| 749 | M: Tomas Cech <sleep_walker@suse.cz> | 751 | M: Tomas Cech <sleep_walker@suse.cz> |
| 752 | L: linux-arm-kernel@lists.infradead.org | ||
| 750 | W: http://hackndev.com | 753 | W: http://hackndev.com |
| 751 | S: Maintained | 754 | S: Maintained |
| 752 | 755 | ||
| 753 | ARM/PALMZ72 SUPPORT | 756 | ARM/PALMZ72 SUPPORT |
| 754 | M: Sergey Lapin <slapin@ossfans.org> | 757 | M: Sergey Lapin <slapin@ossfans.org> |
| 758 | L: linux-arm-kernel@lists.infradead.org | ||
| 755 | W: http://hackndev.com | 759 | W: http://hackndev.com |
| 756 | S: Maintained | 760 | S: Maintained |
| 757 | 761 | ||
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d778a699f577..1c4119c60040 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig | |||
| @@ -46,6 +46,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST | |||
| 46 | depends on GENERIC_CLOCKEVENTS | 46 | depends on GENERIC_CLOCKEVENTS |
| 47 | default y if SMP && !LOCAL_TIMERS | 47 | default y if SMP && !LOCAL_TIMERS |
| 48 | 48 | ||
| 49 | config HAVE_TCM | ||
| 50 | bool | ||
| 51 | select GENERIC_ALLOCATOR | ||
| 52 | |||
| 49 | config NO_IOPORT | 53 | config NO_IOPORT |
| 50 | bool | 54 | bool |
| 51 | 55 | ||
| @@ -649,6 +653,7 @@ config ARCH_U300 | |||
| 649 | bool "ST-Ericsson U300 Series" | 653 | bool "ST-Ericsson U300 Series" |
| 650 | depends on MMU | 654 | depends on MMU |
| 651 | select CPU_ARM926T | 655 | select CPU_ARM926T |
| 656 | select HAVE_TCM | ||
| 652 | select ARM_AMBA | 657 | select ARM_AMBA |
| 653 | select ARM_VIC | 658 | select ARM_VIC |
| 654 | select GENERIC_TIME | 659 | select GENERIC_TIME |
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 2293f0ce061e..bd36c778c819 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c | |||
| @@ -865,6 +865,7 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir | |||
| 865 | 865 | ||
| 866 | spin_unlock_irqrestore(&lchip->lock, flags); | 866 | spin_unlock_irqrestore(&lchip->lock, flags); |
| 867 | } | 867 | } |
| 868 | EXPORT_SYMBOL(locomo_gpio_set_dir); | ||
| 868 | 869 | ||
| 869 | int locomo_gpio_read_level(struct device *dev, unsigned int bits) | 870 | int locomo_gpio_read_level(struct device *dev, unsigned int bits) |
| 870 | { | 871 | { |
| @@ -882,6 +883,7 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits) | |||
| 882 | ret &= bits; | 883 | ret &= bits; |
| 883 | return ret; | 884 | return ret; |
| 884 | } | 885 | } |
| 886 | EXPORT_SYMBOL(locomo_gpio_read_level); | ||
| 885 | 887 | ||
| 886 | int locomo_gpio_read_output(struct device *dev, unsigned int bits) | 888 | int locomo_gpio_read_output(struct device *dev, unsigned int bits) |
| 887 | { | 889 | { |
| @@ -899,6 +901,7 @@ int locomo_gpio_read_output(struct device *dev, unsigned int bits) | |||
| 899 | ret &= bits; | 901 | ret &= bits; |
| 900 | return ret; | 902 | return ret; |
| 901 | } | 903 | } |
| 904 | EXPORT_SYMBOL(locomo_gpio_read_output); | ||
| 902 | 905 | ||
| 903 | void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set) | 906 | void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set) |
| 904 | { | 907 | { |
| @@ -920,6 +923,7 @@ void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set) | |||
| 920 | 923 | ||
| 921 | spin_unlock_irqrestore(&lchip->lock, flags); | 924 | spin_unlock_irqrestore(&lchip->lock, flags); |
| 922 | } | 925 | } |
| 926 | EXPORT_SYMBOL(locomo_gpio_write); | ||
| 923 | 927 | ||
| 924 | static void locomo_m62332_sendbit(void *mapbase, int bit) | 928 | static void locomo_m62332_sendbit(void *mapbase, int bit) |
| 925 | { | 929 | { |
| @@ -1084,13 +1088,12 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int | |||
| 1084 | 1088 | ||
| 1085 | spin_unlock_irqrestore(&lchip->lock, flags); | 1089 | spin_unlock_irqrestore(&lchip->lock, flags); |
| 1086 | } | 1090 | } |
| 1091 | EXPORT_SYMBOL(locomo_m62332_senddata); | ||
| 1087 | 1092 | ||
| 1088 | /* | 1093 | /* |
| 1089 | * Frontlight control | 1094 | * Frontlight control |
| 1090 | */ | 1095 | */ |
| 1091 | 1096 | ||
| 1092 | static struct locomo *locomo_chip_driver(struct locomo_dev *ldev); | ||
| 1093 | |||
| 1094 | void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) | 1097 | void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) |
| 1095 | { | 1098 | { |
| 1096 | unsigned long flags; | 1099 | unsigned long flags; |
| @@ -1182,11 +1185,13 @@ int locomo_driver_register(struct locomo_driver *driver) | |||
| 1182 | driver->drv.bus = &locomo_bus_type; | 1185 | driver->drv.bus = &locomo_bus_type; |
| 1183 | return driver_register(&driver->drv); | 1186 | return driver_register(&driver->drv); |
| 1184 | } | 1187 | } |
| 1188 | EXPORT_SYMBOL(locomo_driver_register); | ||
| 1185 | 1189 | ||
| 1186 | void locomo_driver_unregister(struct locomo_driver *driver) | 1190 | void locomo_driver_unregister(struct locomo_driver *driver) |
| 1187 | { | 1191 | { |
| 1188 | driver_unregister(&driver->drv); | 1192 | driver_unregister(&driver->drv); |
| 1189 | } | 1193 | } |
| 1194 | EXPORT_SYMBOL(locomo_driver_unregister); | ||
| 1190 | 1195 | ||
| 1191 | static int __init locomo_init(void) | 1196 | static int __init locomo_init(void) |
| 1192 | { | 1197 | { |
| @@ -1208,11 +1213,3 @@ module_exit(locomo_exit); | |||
| 1208 | MODULE_DESCRIPTION("Sharp LoCoMo core driver"); | 1213 | MODULE_DESCRIPTION("Sharp LoCoMo core driver"); |
| 1209 | MODULE_LICENSE("GPL"); | 1214 | MODULE_LICENSE("GPL"); |
| 1210 | MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>"); | 1215 | MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>"); |
| 1211 | |||
| 1212 | EXPORT_SYMBOL(locomo_driver_register); | ||
| 1213 | EXPORT_SYMBOL(locomo_driver_unregister); | ||
| 1214 | EXPORT_SYMBOL(locomo_gpio_set_dir); | ||
| 1215 | EXPORT_SYMBOL(locomo_gpio_read_level); | ||
| 1216 | EXPORT_SYMBOL(locomo_gpio_read_output); | ||
| 1217 | EXPORT_SYMBOL(locomo_gpio_write); | ||
| 1218 | EXPORT_SYMBOL(locomo_m62332_senddata); | ||
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 920ced0b73c5..f232941de8ab 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c | |||
| @@ -22,6 +22,7 @@ | |||
| 22 | #include <linux/list.h> | 22 | #include <linux/list.h> |
| 23 | #include <linux/io.h> | 23 | #include <linux/io.h> |
| 24 | #include <linux/sysdev.h> | 24 | #include <linux/sysdev.h> |
| 25 | #include <linux/device.h> | ||
| 25 | #include <linux/amba/bus.h> | 26 | #include <linux/amba/bus.h> |
| 26 | 27 | ||
| 27 | #include <asm/mach/irq.h> | 28 | #include <asm/mach/irq.h> |
diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig deleted file mode 100644 index 1db496908052..000000000000 --- a/arch/arm/configs/littleton_defconfig +++ /dev/null | |||
| @@ -1,783 +0,0 @@ | |||
| 1 | # | ||
| 2 | # Automatically generated make config: don't edit | ||
| 3 | # Linux kernel version: 2.6.24-rc5 | ||
| 4 | # Fri Dec 21 11:06:19 2007 | ||
| 5 | # | ||
| 6 | CONFIG_ARM=y | ||
| 7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
| 8 | CONFIG_GENERIC_GPIO=y | ||
| 9 | CONFIG_GENERIC_TIME=y | ||
| 10 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
| 11 | CONFIG_MMU=y | ||
| 12 | # CONFIG_NO_IOPORT is not set | ||
| 13 | CONFIG_GENERIC_HARDIRQS=y | ||
| 14 | CONFIG_STACKTRACE_SUPPORT=y | ||
| 15 | CONFIG_LOCKDEP_SUPPORT=y | ||
| 16 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
| 17 | CONFIG_HARDIRQS_SW_RESEND=y | ||
| 18 | CONFIG_GENERIC_IRQ_PROBE=y | ||
| 19 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
| 20 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
| 21 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
| 22 | CONFIG_GENERIC_HWEIGHT=y | ||
| 23 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
| 24 | CONFIG_ZONE_DMA=y | ||
| 25 | CONFIG_ARCH_MTD_XIP=y | ||
| 26 | CONFIG_VECTORS_BASE=0xffff0000 | ||
| 27 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
| 28 | |||
| 29 | # | ||
| 30 | # General setup | ||
| 31 | # | ||
| 32 | CONFIG_EXPERIMENTAL=y | ||
| 33 | CONFIG_BROKEN_ON_SMP=y | ||
| 34 | CONFIG_LOCK_KERNEL=y | ||
| 35 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
| 36 | CONFIG_LOCALVERSION="" | ||
| 37 | CONFIG_LOCALVERSION_AUTO=y | ||
| 38 | CONFIG_SWAP=y | ||
| 39 | CONFIG_SYSVIPC=y | ||
| 40 | CONFIG_SYSVIPC_SYSCTL=y | ||
| 41 | # CONFIG_POSIX_MQUEUE is not set | ||
| 42 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
| 43 | # CONFIG_TASKSTATS is not set | ||
| 44 | # CONFIG_USER_NS is not set | ||
| 45 | # CONFIG_PID_NS is not set | ||
| 46 | # CONFIG_AUDIT is not set | ||
| 47 | # CONFIG_IKCONFIG is not set | ||
| 48 | CONFIG_LOG_BUF_SHIFT=14 | ||
| 49 | # CONFIG_CGROUPS is not set | ||
| 50 | CONFIG_FAIR_GROUP_SCHED=y | ||
| 51 | CONFIG_FAIR_USER_SCHED=y | ||
| 52 | # CONFIG_FAIR_CGROUP_SCHED is not set | ||
| 53 | CONFIG_SYSFS_DEPRECATED=y | ||
| 54 | # CONFIG_RELAY is not set | ||
| 55 | CONFIG_BLK_DEV_INITRD=y | ||
| 56 | CONFIG_INITRAMFS_SOURCE="" | ||
| 57 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
| 58 | CONFIG_SYSCTL=y | ||
| 59 | # CONFIG_EMBEDDED is not set | ||
| 60 | CONFIG_UID16=y | ||
| 61 | CONFIG_SYSCTL_SYSCALL=y | ||
| 62 | CONFIG_KALLSYMS=y | ||
| 63 | # CONFIG_KALLSYMS_ALL is not set | ||
| 64 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
| 65 | CONFIG_HOTPLUG=y | ||
| 66 | CONFIG_PRINTK=y | ||
| 67 | CONFIG_BUG=y | ||
| 68 | CONFIG_ELF_CORE=y | ||
| 69 | CONFIG_BASE_FULL=y | ||
| 70 | CONFIG_FUTEX=y | ||
| 71 | CONFIG_ANON_INODES=y | ||
| 72 | CONFIG_EPOLL=y | ||
| 73 | CONFIG_SIGNALFD=y | ||
| 74 | CONFIG_EVENTFD=y | ||
| 75 | CONFIG_SHMEM=y | ||
| 76 | CONFIG_VM_EVENT_COUNTERS=y | ||
| 77 | CONFIG_SLAB=y | ||
| 78 | # CONFIG_SLUB is not set | ||
| 79 | # CONFIG_SLOB is not set | ||
| 80 | CONFIG_RT_MUTEXES=y | ||
| 81 | # CONFIG_TINY_SHMEM is not set | ||
| 82 | CONFIG_BASE_SMALL=0 | ||
| 83 | CONFIG_MODULES=y | ||
| 84 | CONFIG_MODULE_UNLOAD=y | ||
| 85 | CONFIG_MODULE_FORCE_UNLOAD=y | ||
| 86 | # CONFIG_MODVERSIONS is not set | ||
| 87 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
| 88 | # CONFIG_KMOD is not set | ||
| 89 | CONFIG_BLOCK=y | ||
| 90 | # CONFIG_LBD is not set | ||
| 91 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
| 92 | # CONFIG_LSF is not set | ||
| 93 | # CONFIG_BLK_DEV_BSG is not set | ||
| 94 | |||
| 95 | # | ||
| 96 | # IO Schedulers | ||
| 97 | # | ||
| 98 | CONFIG_IOSCHED_NOOP=y | ||
| 99 | CONFIG_IOSCHED_AS=y | ||
| 100 | CONFIG_IOSCHED_DEADLINE=y | ||
| 101 | CONFIG_IOSCHED_CFQ=y | ||
| 102 | # CONFIG_DEFAULT_AS is not set | ||
| 103 | # CONFIG_DEFAULT_DEADLINE is not set | ||
| 104 | CONFIG_DEFAULT_CFQ=y | ||
| 105 | # CONFIG_DEFAULT_NOOP is not set | ||
| 106 | CONFIG_DEFAULT_IOSCHED="cfq" | ||
| 107 | |||
| 108 | # | ||
| 109 | # System Type | ||
| 110 | # | ||
| 111 | # CONFIG_ARCH_AAEC2000 is not set | ||
| 112 | # CONFIG_ARCH_INTEGRATOR is not set | ||
| 113 | # CONFIG_ARCH_REALVIEW is not set | ||
| 114 | # CONFIG_ARCH_VERSATILE is not set | ||
| 115 | # CONFIG_ARCH_AT91 is not set | ||
| 116 | # CONFIG_ARCH_CLPS7500 is not set | ||
| 117 | # CONFIG_ARCH_CLPS711X is not set | ||
| 118 | # CONFIG_ARCH_CO285 is not set | ||
| 119 | # CONFIG_ARCH_EBSA110 is not set | ||
| 120 | # CONFIG_ARCH_EP93XX is not set | ||
| 121 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
| 122 | # CONFIG_ARCH_NETX is not set | ||
| 123 | # CONFIG_ARCH_H720X is not set | ||
| 124 | # CONFIG_ARCH_IMX is not set | ||
| 125 | # CONFIG_ARCH_IOP13XX is not set | ||
| 126 | # CONFIG_ARCH_IOP32X is not set | ||
| 127 | # CONFIG_ARCH_IOP33X is not set | ||
| 128 | # CONFIG_ARCH_IXP23XX is not set | ||
| 129 | # CONFIG_ARCH_IXP2000 is not set | ||
| 130 | # CONFIG_ARCH_IXP4XX is not set | ||
| 131 | # CONFIG_ARCH_L7200 is not set | ||
| 132 | # CONFIG_ARCH_KS8695 is not set | ||
| 133 | # CONFIG_ARCH_NS9XXX is not set | ||
| 134 | # CONFIG_ARCH_MXC is not set | ||
| 135 | # CONFIG_ARCH_PNX4008 is not set | ||
| 136 | CONFIG_ARCH_PXA=y | ||
| 137 | # CONFIG_ARCH_RPC is not set | ||
| 138 | # CONFIG_ARCH_SA1100 is not set | ||
| 139 | # CONFIG_ARCH_S3C2410 is not set | ||
| 140 | # CONFIG_ARCH_SHARK is not set | ||
| 141 | # CONFIG_ARCH_LH7A40X is not set | ||
| 142 | # CONFIG_ARCH_DAVINCI is not set | ||
| 143 | # CONFIG_ARCH_OMAP is not set | ||
| 144 | |||
| 145 | # | ||
| 146 | # Intel PXA2xx/PXA3xx Implementations | ||
| 147 | # | ||
| 148 | |||
| 149 | # | ||
| 150 | # Supported PXA3xx Processor Variants | ||
| 151 | # | ||
| 152 | CONFIG_CPU_PXA300=y | ||
| 153 | CONFIG_CPU_PXA310=y | ||
| 154 | # CONFIG_CPU_PXA320 is not set | ||
| 155 | # CONFIG_ARCH_LUBBOCK is not set | ||
| 156 | # CONFIG_MACH_LOGICPD_PXA270 is not set | ||
| 157 | # CONFIG_MACH_MAINSTONE is not set | ||
| 158 | # CONFIG_ARCH_PXA_IDP is not set | ||
| 159 | # CONFIG_PXA_SHARPSL is not set | ||
| 160 | # CONFIG_MACH_TRIZEPS4 is not set | ||
| 161 | # CONFIG_MACH_EM_X270 is not set | ||
| 162 | # CONFIG_MACH_ZYLONITE is not set | ||
| 163 | CONFIG_MACH_LITTLETON=y | ||
| 164 | # CONFIG_MACH_ARMCORE is not set | ||
| 165 | CONFIG_PXA3xx=y | ||
| 166 | CONFIG_PXA_SSP=y | ||
| 167 | |||
| 168 | # | ||
| 169 | # Boot options | ||
| 170 | # | ||
| 171 | |||
| 172 | # | ||
| 173 | # Power management | ||
| 174 | # | ||
| 175 | |||
| 176 | # | ||
| 177 | # Processor Type | ||
| 178 | # | ||
| 179 | CONFIG_CPU_32=y | ||
| 180 | CONFIG_CPU_XSC3=y | ||
| 181 | CONFIG_CPU_32v5=y | ||
| 182 | CONFIG_CPU_ABRT_EV5T=y | ||
| 183 | CONFIG_CPU_CACHE_VIVT=y | ||
| 184 | CONFIG_CPU_TLB_V4WBI=y | ||
| 185 | CONFIG_CPU_CP15=y | ||
| 186 | CONFIG_CPU_CP15_MMU=y | ||
| 187 | CONFIG_IO_36=y | ||
| 188 | |||
| 189 | # | ||
| 190 | # Processor Features | ||
| 191 | # | ||
| 192 | # CONFIG_ARM_THUMB is not set | ||
| 193 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
| 194 | # CONFIG_CPU_BPREDICT_DISABLE is not set | ||
| 195 | # CONFIG_OUTER_CACHE is not set | ||
| 196 | CONFIG_IWMMXT=y | ||
| 197 | |||
| 198 | # | ||
| 199 | # Bus support | ||
| 200 | # | ||
| 201 | # CONFIG_PCI_SYSCALL is not set | ||
| 202 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
| 203 | # CONFIG_PCCARD is not set | ||
| 204 | |||
| 205 | # | ||
| 206 | # Kernel Features | ||
| 207 | # | ||
| 208 | CONFIG_TICK_ONESHOT=y | ||
| 209 | # CONFIG_NO_HZ is not set | ||
| 210 | # CONFIG_HIGH_RES_TIMERS is not set | ||
| 211 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
| 212 | CONFIG_PREEMPT=y | ||
| 213 | CONFIG_HZ=100 | ||
| 214 | CONFIG_AEABI=y | ||
| 215 | CONFIG_OABI_COMPAT=y | ||
| 216 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
| 217 | CONFIG_SELECT_MEMORY_MODEL=y | ||
| 218 | CONFIG_FLATMEM_MANUAL=y | ||
| 219 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
| 220 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
| 221 | CONFIG_FLATMEM=y | ||
| 222 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
| 223 | # CONFIG_SPARSEMEM_STATIC is not set | ||
| 224 | # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set | ||
| 225 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
| 226 | # CONFIG_RESOURCES_64BIT is not set | ||
| 227 | CONFIG_ZONE_DMA_FLAG=1 | ||
| 228 | CONFIG_BOUNCE=y | ||
| 229 | CONFIG_VIRT_TO_BUS=y | ||
| 230 | CONFIG_ALIGNMENT_TRAP=y | ||
| 231 | |||
| 232 | # | ||
| 233 | # Boot options | ||
| 234 | # | ||
| 235 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
| 236 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
| 237 | CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M" | ||
| 238 | # CONFIG_XIP_KERNEL is not set | ||
| 239 | # CONFIG_KEXEC is not set | ||
| 240 | |||
| 241 | # | ||
| 242 | # CPU Frequency scaling | ||
| 243 | # | ||
| 244 | # CONFIG_CPU_FREQ is not set | ||
| 245 | |||
| 246 | # | ||
| 247 | # Floating point emulation | ||
| 248 | # | ||
| 249 | |||
| 250 | # | ||
| 251 | # At least one emulation must be selected | ||
| 252 | # | ||
| 253 | CONFIG_FPE_NWFPE=y | ||
| 254 | # CONFIG_FPE_NWFPE_XP is not set | ||
| 255 | # CONFIG_FPE_FASTFPE is not set | ||
| 256 | |||
| 257 | # | ||
| 258 | # Userspace binary formats | ||
| 259 | # | ||
| 260 | CONFIG_BINFMT_ELF=y | ||
| 261 | # CONFIG_BINFMT_AOUT is not set | ||
| 262 | # CONFIG_BINFMT_MISC is not set | ||
| 263 | |||
| 264 | # | ||
| 265 | # Power management options | ||
| 266 | # | ||
| 267 | # CONFIG_PM is not set | ||
| 268 | CONFIG_SUSPEND_UP_POSSIBLE=y | ||
| 269 | |||
| 270 | # | ||
| 271 | # Networking | ||
| 272 | # | ||
| 273 | CONFIG_NET=y | ||
| 274 | |||
| 275 | # | ||
| 276 | # Networking options | ||
| 277 | # | ||
| 278 | CONFIG_PACKET=y | ||
| 279 | # CONFIG_PACKET_MMAP is not set | ||
| 280 | CONFIG_UNIX=y | ||
| 281 | CONFIG_XFRM=y | ||
| 282 | # CONFIG_XFRM_USER is not set | ||
| 283 | # CONFIG_XFRM_SUB_POLICY is not set | ||
| 284 | # CONFIG_XFRM_MIGRATE is not set | ||
| 285 | # CONFIG_NET_KEY is not set | ||
| 286 | CONFIG_INET=y | ||
| 287 | # CONFIG_IP_MULTICAST is not set | ||
| 288 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
| 289 | CONFIG_IP_FIB_HASH=y | ||
| 290 | CONFIG_IP_PNP=y | ||
| 291 | # CONFIG_IP_PNP_DHCP is not set | ||
| 292 | # CONFIG_IP_PNP_BOOTP is not set | ||
| 293 | # CONFIG_IP_PNP_RARP is not set | ||
| 294 | # CONFIG_NET_IPIP is not set | ||
| 295 | # CONFIG_NET_IPGRE is not set | ||
| 296 | # CONFIG_ARPD is not set | ||
| 297 | # CONFIG_SYN_COOKIES is not set | ||
| 298 | # CONFIG_INET_AH is not set | ||
| 299 | # CONFIG_INET_ESP is not set | ||
| 300 | # CONFIG_INET_IPCOMP is not set | ||
| 301 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
| 302 | # CONFIG_INET_TUNNEL is not set | ||
| 303 | CONFIG_INET_XFRM_MODE_TRANSPORT=y | ||
| 304 | CONFIG_INET_XFRM_MODE_TUNNEL=y | ||
| 305 | CONFIG_INET_XFRM_MODE_BEET=y | ||
| 306 | # CONFIG_INET_LRO is not set | ||
| 307 | CONFIG_INET_DIAG=y | ||
| 308 | CONFIG_INET_TCP_DIAG=y | ||
| 309 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
| 310 | CONFIG_TCP_CONG_CUBIC=y | ||
| 311 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
| 312 | # CONFIG_TCP_MD5SIG is not set | ||
| 313 | # CONFIG_IPV6 is not set | ||
| 314 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
| 315 | # CONFIG_INET6_TUNNEL is not set | ||
| 316 | # CONFIG_NETWORK_SECMARK is not set | ||
| 317 | # CONFIG_NETFILTER is not set | ||
| 318 | # CONFIG_IP_DCCP is not set | ||
| 319 | # CONFIG_IP_SCTP is not set | ||
| 320 | # CONFIG_TIPC is not set | ||
| 321 | # CONFIG_ATM is not set | ||
| 322 | # CONFIG_BRIDGE is not set | ||
| 323 | # CONFIG_VLAN_8021Q is not set | ||
| 324 | # CONFIG_DECNET is not set | ||
| 325 | # CONFIG_LLC2 is not set | ||
| 326 | # CONFIG_IPX is not set | ||
| 327 | # CONFIG_ATALK is not set | ||
| 328 | # CONFIG_X25 is not set | ||
| 329 | # CONFIG_LAPB is not set | ||
| 330 | # CONFIG_ECONET is not set | ||
| 331 | # CONFIG_WAN_ROUTER is not set | ||
| 332 | # CONFIG_NET_SCHED is not set | ||
| 333 | |||
| 334 | # | ||
| 335 | # Network testing | ||
| 336 | # | ||
| 337 | # CONFIG_NET_PKTGEN is not set | ||
| 338 | # CONFIG_HAMRADIO is not set | ||
| 339 | # CONFIG_IRDA is not set | ||
| 340 | # CONFIG_BT is not set | ||
| 341 | # CONFIG_AF_RXRPC is not set | ||
| 342 | |||
| 343 | # | ||
| 344 | # Wireless | ||
| 345 | # | ||
| 346 | # CONFIG_CFG80211 is not set | ||
| 347 | # CONFIG_WIRELESS_EXT is not set | ||
| 348 | # CONFIG_MAC80211 is not set | ||
| 349 | # CONFIG_IEEE80211 is not set | ||
| 350 | # CONFIG_RFKILL is not set | ||
| 351 | # CONFIG_NET_9P is not set | ||
| 352 | |||
| 353 | # | ||
| 354 | # Device Drivers | ||
| 355 | # | ||
| 356 | |||
| 357 | # | ||
| 358 | # Generic Driver Options | ||
| 359 | # | ||
| 360 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
| 361 | # CONFIG_STANDALONE is not set | ||
| 362 | # CONFIG_PREVENT_FIRMWARE_BUILD is not set | ||
| 363 | CONFIG_FW_LOADER=y | ||
| 364 | # CONFIG_DEBUG_DRIVER is not set | ||
| 365 | # CONFIG_DEBUG_DEVRES is not set | ||
| 366 | # CONFIG_SYS_HYPERVISOR is not set | ||
| 367 | # CONFIG_CONNECTOR is not set | ||
| 368 | # CONFIG_MTD is not set | ||
| 369 | # CONFIG_PARPORT is not set | ||
| 370 | # CONFIG_BLK_DEV is not set | ||
| 371 | # CONFIG_MISC_DEVICES is not set | ||
| 372 | # CONFIG_IDE is not set | ||
| 373 | |||
| 374 | # | ||
| 375 | # SCSI device support | ||
| 376 | # | ||
| 377 | # CONFIG_RAID_ATTRS is not set | ||
| 378 | # CONFIG_SCSI is not set | ||
| 379 | # CONFIG_SCSI_DMA is not set | ||
| 380 | # CONFIG_SCSI_NETLINK is not set | ||
| 381 | # CONFIG_ATA is not set | ||
| 382 | # CONFIG_MD is not set | ||
| 383 | CONFIG_NETDEVICES=y | ||
| 384 | # CONFIG_NETDEVICES_MULTIQUEUE is not set | ||
| 385 | # CONFIG_DUMMY is not set | ||
| 386 | # CONFIG_BONDING is not set | ||
| 387 | # CONFIG_MACVLAN is not set | ||
| 388 | # CONFIG_EQUALIZER is not set | ||
| 389 | # CONFIG_TUN is not set | ||
| 390 | # CONFIG_VETH is not set | ||
| 391 | # CONFIG_PHYLIB is not set | ||
| 392 | CONFIG_NET_ETHERNET=y | ||
| 393 | CONFIG_MII=y | ||
| 394 | # CONFIG_AX88796 is not set | ||
| 395 | CONFIG_SMC91X=y | ||
| 396 | # CONFIG_DM9000 is not set | ||
| 397 | # CONFIG_SMC911X is not set | ||
| 398 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
| 399 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
| 400 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
| 401 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
| 402 | # CONFIG_B44 is not set | ||
| 403 | # CONFIG_NETDEV_1000 is not set | ||
| 404 | # CONFIG_NETDEV_10000 is not set | ||
| 405 | |||
| 406 | # | ||
| 407 | # Wireless LAN | ||
| 408 | # | ||
| 409 | # CONFIG_WLAN_PRE80211 is not set | ||
| 410 | # CONFIG_WLAN_80211 is not set | ||
| 411 | # CONFIG_WAN is not set | ||
| 412 | # CONFIG_PPP is not set | ||
| 413 | # CONFIG_SLIP is not set | ||
| 414 | # CONFIG_SHAPER is not set | ||
| 415 | # CONFIG_NETCONSOLE is not set | ||
| 416 | # CONFIG_NETPOLL is not set | ||
| 417 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
| 418 | # CONFIG_ISDN is not set | ||
| 419 | |||
| 420 | # | ||
| 421 | # Input device support | ||
| 422 | # | ||
| 423 | CONFIG_INPUT=y | ||
| 424 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
| 425 | # CONFIG_INPUT_POLLDEV is not set | ||
| 426 | |||
| 427 | # | ||
| 428 | # Userland interfaces | ||
| 429 | # | ||
| 430 | CONFIG_INPUT_MOUSEDEV=y | ||
| 431 | # CONFIG_INPUT_MOUSEDEV_PSAUX is not set | ||
| 432 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
| 433 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
| 434 | # CONFIG_INPUT_JOYDEV is not set | ||
| 435 | # CONFIG_INPUT_EVDEV is not set | ||
| 436 | # CONFIG_INPUT_EVBUG is not set | ||
| 437 | |||
| 438 | # | ||
| 439 | # Input Device Drivers | ||
| 440 | # | ||
| 441 | # CONFIG_INPUT_KEYBOARD is not set | ||
| 442 | # CONFIG_INPUT_MOUSE is not set | ||
| 443 | # CONFIG_INPUT_JOYSTICK is not set | ||
| 444 | # CONFIG_INPUT_TABLET is not set | ||
| 445 | # CONFIG_INPUT_TOUCHSCREEN is not set | ||
| 446 | # CONFIG_INPUT_MISC is not set | ||
| 447 | |||
| 448 | # | ||
| 449 | # Hardware I/O ports | ||
| 450 | # | ||
| 451 | # CONFIG_SERIO is not set | ||
| 452 | # CONFIG_GAMEPORT is not set | ||
| 453 | |||
| 454 | # | ||
| 455 | # Character devices | ||
| 456 | # | ||
| 457 | CONFIG_VT=y | ||
| 458 | CONFIG_VT_CONSOLE=y | ||
| 459 | CONFIG_HW_CONSOLE=y | ||
| 460 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
| 461 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
| 462 | |||
| 463 | # | ||
| 464 | # Serial drivers | ||
| 465 | # | ||
| 466 | # CONFIG_SERIAL_8250 is not set | ||
| 467 | |||
| 468 | # | ||
| 469 | # Non-8250 serial port support | ||
| 470 | # | ||
| 471 | CONFIG_SERIAL_PXA=y | ||
| 472 | CONFIG_SERIAL_PXA_CONSOLE=y | ||
| 473 | CONFIG_SERIAL_CORE=y | ||
| 474 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
| 475 | CONFIG_UNIX98_PTYS=y | ||
| 476 | # CONFIG_LEGACY_PTYS is not set | ||
| 477 | # CONFIG_IPMI_HANDLER is not set | ||
| 478 | # CONFIG_HW_RANDOM is not set | ||
| 479 | # CONFIG_NVRAM is not set | ||
| 480 | # CONFIG_R3964 is not set | ||
| 481 | # CONFIG_RAW_DRIVER is not set | ||
| 482 | # CONFIG_TCG_TPM is not set | ||
| 483 | # CONFIG_I2C is not set | ||
| 484 | |||
| 485 | # | ||
| 486 | # SPI support | ||
| 487 | # | ||
| 488 | # CONFIG_SPI is not set | ||
| 489 | # CONFIG_SPI_MASTER is not set | ||
| 490 | # CONFIG_W1 is not set | ||
| 491 | # CONFIG_POWER_SUPPLY is not set | ||
| 492 | # CONFIG_HWMON is not set | ||
| 493 | # CONFIG_WATCHDOG is not set | ||
| 494 | |||
| 495 | # | ||
| 496 | # Sonics Silicon Backplane | ||
| 497 | # | ||
| 498 | CONFIG_SSB_POSSIBLE=y | ||
| 499 | # CONFIG_SSB is not set | ||
| 500 | |||
| 501 | # | ||
| 502 | # Multifunction device drivers | ||
| 503 | # | ||
| 504 | # CONFIG_MFD_SM501 is not set | ||
| 505 | |||
| 506 | # | ||
| 507 | # Multimedia devices | ||
| 508 | # | ||
| 509 | # CONFIG_VIDEO_DEV is not set | ||
| 510 | # CONFIG_DVB_CORE is not set | ||
| 511 | # CONFIG_DAB is not set | ||
| 512 | |||
| 513 | # | ||
| 514 | # Graphics support | ||
| 515 | # | ||
| 516 | # CONFIG_VGASTATE is not set | ||
| 517 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
| 518 | CONFIG_FB=y | ||
| 519 | # CONFIG_FIRMWARE_EDID is not set | ||
| 520 | # CONFIG_FB_DDC is not set | ||
| 521 | CONFIG_FB_CFB_FILLRECT=y | ||
| 522 | CONFIG_FB_CFB_COPYAREA=y | ||
| 523 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
| 524 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
| 525 | # CONFIG_FB_SYS_FILLRECT is not set | ||
| 526 | # CONFIG_FB_SYS_COPYAREA is not set | ||
| 527 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
| 528 | # CONFIG_FB_SYS_FOPS is not set | ||
| 529 | CONFIG_FB_DEFERRED_IO=y | ||
| 530 | # CONFIG_FB_SVGALIB is not set | ||
| 531 | # CONFIG_FB_MACMODES is not set | ||
| 532 | # CONFIG_FB_BACKLIGHT is not set | ||
| 533 | # CONFIG_FB_MODE_HELPERS is not set | ||
| 534 | # CONFIG_FB_TILEBLITTING is not set | ||
| 535 | |||
| 536 | # | ||
| 537 | # Frame buffer hardware drivers | ||
| 538 | # | ||
| 539 | # CONFIG_FB_S1D13XXX is not set | ||
| 540 | CONFIG_FB_PXA=y | ||
| 541 | # CONFIG_FB_PXA_PARAMETERS is not set | ||
| 542 | # CONFIG_FB_MBX is not set | ||
| 543 | # CONFIG_FB_VIRTUAL is not set | ||
| 544 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
| 545 | |||
| 546 | # | ||
| 547 | # Display device support | ||
| 548 | # | ||
| 549 | # CONFIG_DISPLAY_SUPPORT is not set | ||
| 550 | |||
| 551 | # | ||
| 552 | # Console display driver support | ||
| 553 | # | ||
| 554 | # CONFIG_VGA_CONSOLE is not set | ||
| 555 | CONFIG_DUMMY_CONSOLE=y | ||
| 556 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
| 557 | # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set | ||
| 558 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
| 559 | CONFIG_FONTS=y | ||
| 560 | # CONFIG_FONT_8x8 is not set | ||
| 561 | CONFIG_FONT_8x16=y | ||
| 562 | # CONFIG_FONT_6x11 is not set | ||
| 563 | # CONFIG_FONT_7x14 is not set | ||
| 564 | # CONFIG_FONT_PEARL_8x8 is not set | ||
| 565 | # CONFIG_FONT_ACORN_8x8 is not set | ||
| 566 | # CONFIG_FONT_MINI_4x6 is not set | ||
| 567 | # CONFIG_FONT_SUN8x16 is not set | ||
| 568 | # CONFIG_FONT_SUN12x22 is not set | ||
| 569 | # CONFIG_FONT_10x18 is not set | ||
| 570 | CONFIG_LOGO=y | ||
| 571 | CONFIG_LOGO_LINUX_MONO=y | ||
| 572 | CONFIG_LOGO_LINUX_VGA16=y | ||
| 573 | CONFIG_LOGO_LINUX_CLUT224=y | ||
| 574 | |||
| 575 | # | ||
| 576 | # Sound | ||
| 577 | # | ||
| 578 | # CONFIG_SOUND is not set | ||
| 579 | # CONFIG_HID_SUPPORT is not set | ||
| 580 | # CONFIG_USB_SUPPORT is not set | ||
| 581 | # CONFIG_MMC is not set | ||
| 582 | # CONFIG_NEW_LEDS is not set | ||
| 583 | CONFIG_RTC_LIB=y | ||
| 584 | # CONFIG_RTC_CLASS is not set | ||
| 585 | |||
| 586 | # | ||
| 587 | # File systems | ||
| 588 | # | ||
| 589 | # CONFIG_EXT2_FS is not set | ||
| 590 | # CONFIG_EXT3_FS is not set | ||
| 591 | # CONFIG_EXT4DEV_FS is not set | ||
| 592 | # CONFIG_REISERFS_FS is not set | ||
| 593 | # CONFIG_JFS_FS is not set | ||
| 594 | CONFIG_FS_POSIX_ACL=y | ||
| 595 | # CONFIG_XFS_FS is not set | ||
| 596 | # CONFIG_GFS2_FS is not set | ||
| 597 | # CONFIG_OCFS2_FS is not set | ||
| 598 | # CONFIG_MINIX_FS is not set | ||
| 599 | # CONFIG_ROMFS_FS is not set | ||
| 600 | # CONFIG_INOTIFY is not set | ||
| 601 | # CONFIG_QUOTA is not set | ||
| 602 | # CONFIG_DNOTIFY is not set | ||
| 603 | # CONFIG_AUTOFS_FS is not set | ||
| 604 | # CONFIG_AUTOFS4_FS is not set | ||
| 605 | # CONFIG_FUSE_FS is not set | ||
| 606 | |||
| 607 | # | ||
| 608 | # CD-ROM/DVD Filesystems | ||
| 609 | # | ||
| 610 | # CONFIG_ISO9660_FS is not set | ||
| 611 | # CONFIG_UDF_FS is not set | ||
| 612 | |||
| 613 | # | ||
| 614 | # DOS/FAT/NT Filesystems | ||
| 615 | # | ||
| 616 | # CONFIG_MSDOS_FS is not set | ||
| 617 | # CONFIG_VFAT_FS is not set | ||
| 618 | # CONFIG_NTFS_FS is not set | ||
| 619 | |||
| 620 | # | ||
| 621 | # Pseudo filesystems | ||
| 622 | # | ||
| 623 | CONFIG_PROC_FS=y | ||
| 624 | CONFIG_PROC_SYSCTL=y | ||
| 625 | CONFIG_SYSFS=y | ||
| 626 | # CONFIG_TMPFS is not set | ||
| 627 | # CONFIG_HUGETLB_PAGE is not set | ||
| 628 | # CONFIG_CONFIGFS_FS is not set | ||
| 629 | |||
| 630 | # | ||
| 631 | # Miscellaneous filesystems | ||
| 632 | # | ||
| 633 | # CONFIG_ADFS_FS is not set | ||
| 634 | # CONFIG_AFFS_FS is not set | ||
| 635 | # CONFIG_HFS_FS is not set | ||
| 636 | # CONFIG_HFSPLUS_FS is not set | ||
| 637 | # CONFIG_BEFS_FS is not set | ||
| 638 | # CONFIG_BFS_FS is not set | ||
| 639 | # CONFIG_EFS_FS is not set | ||
| 640 | # CONFIG_CRAMFS is not set | ||
| 641 | # CONFIG_VXFS_FS is not set | ||
| 642 | # CONFIG_HPFS_FS is not set | ||
| 643 | # CONFIG_QNX4FS_FS is not set | ||
| 644 | # CONFIG_SYSV_FS is not set | ||
| 645 | # CONFIG_UFS_FS is not set | ||
| 646 | CONFIG_NETWORK_FILESYSTEMS=y | ||
| 647 | CONFIG_NFS_FS=y | ||
| 648 | CONFIG_NFS_V3=y | ||
| 649 | CONFIG_NFS_V3_ACL=y | ||
| 650 | CONFIG_NFS_V4=y | ||
| 651 | CONFIG_NFS_DIRECTIO=y | ||
| 652 | # CONFIG_NFSD is not set | ||
| 653 | CONFIG_ROOT_NFS=y | ||
| 654 | CONFIG_LOCKD=y | ||
| 655 | CONFIG_LOCKD_V4=y | ||
| 656 | CONFIG_NFS_ACL_SUPPORT=y | ||
| 657 | CONFIG_NFS_COMMON=y | ||
| 658 | CONFIG_SUNRPC=y | ||
| 659 | CONFIG_SUNRPC_GSS=y | ||
| 660 | # CONFIG_SUNRPC_BIND34 is not set | ||
| 661 | CONFIG_RPCSEC_GSS_KRB5=y | ||
| 662 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
| 663 | # CONFIG_SMB_FS is not set | ||
| 664 | # CONFIG_CIFS is not set | ||
| 665 | # CONFIG_NCP_FS is not set | ||
| 666 | # CONFIG_CODA_FS is not set | ||
| 667 | # CONFIG_AFS_FS is not set | ||
| 668 | |||
| 669 | # | ||
| 670 | # Partition Types | ||
| 671 | # | ||
| 672 | # CONFIG_PARTITION_ADVANCED is not set | ||
| 673 | CONFIG_MSDOS_PARTITION=y | ||
| 674 | # CONFIG_NLS is not set | ||
| 675 | # CONFIG_DLM is not set | ||
| 676 | # CONFIG_INSTRUMENTATION is not set | ||
| 677 | |||
| 678 | # | ||
| 679 | # Kernel hacking | ||
| 680 | # | ||
| 681 | CONFIG_PRINTK_TIME=y | ||
| 682 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
| 683 | CONFIG_ENABLE_MUST_CHECK=y | ||
| 684 | CONFIG_MAGIC_SYSRQ=y | ||
| 685 | # CONFIG_UNUSED_SYMBOLS is not set | ||
| 686 | # CONFIG_DEBUG_FS is not set | ||
| 687 | # CONFIG_HEADERS_CHECK is not set | ||
| 688 | CONFIG_DEBUG_KERNEL=y | ||
| 689 | # CONFIG_DEBUG_SHIRQ is not set | ||
| 690 | CONFIG_DETECT_SOFTLOCKUP=y | ||
| 691 | CONFIG_SCHED_DEBUG=y | ||
| 692 | # CONFIG_SCHEDSTATS is not set | ||
| 693 | # CONFIG_TIMER_STATS is not set | ||
| 694 | # CONFIG_DEBUG_SLAB is not set | ||
| 695 | # CONFIG_DEBUG_PREEMPT is not set | ||
| 696 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
| 697 | # CONFIG_RT_MUTEX_TESTER is not set | ||
| 698 | # CONFIG_DEBUG_SPINLOCK is not set | ||
| 699 | # CONFIG_DEBUG_MUTEXES is not set | ||
| 700 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
| 701 | # CONFIG_PROVE_LOCKING is not set | ||
| 702 | # CONFIG_LOCK_STAT is not set | ||
| 703 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
| 704 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
| 705 | # CONFIG_DEBUG_KOBJECT is not set | ||
| 706 | CONFIG_DEBUG_BUGVERBOSE=y | ||
| 707 | CONFIG_DEBUG_INFO=y | ||
| 708 | # CONFIG_DEBUG_VM is not set | ||
| 709 | # CONFIG_DEBUG_LIST is not set | ||
| 710 | # CONFIG_DEBUG_SG is not set | ||
| 711 | CONFIG_FRAME_POINTER=y | ||
| 712 | CONFIG_FORCED_INLINING=y | ||
| 713 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
| 714 | # CONFIG_RCU_TORTURE_TEST is not set | ||
| 715 | # CONFIG_FAULT_INJECTION is not set | ||
| 716 | # CONFIG_SAMPLES is not set | ||
| 717 | CONFIG_DEBUG_USER=y | ||
| 718 | CONFIG_DEBUG_ERRORS=y | ||
| 719 | CONFIG_DEBUG_LL=y | ||
| 720 | # CONFIG_DEBUG_ICEDCC is not set | ||
| 721 | |||
| 722 | # | ||
| 723 | # Security options | ||
| 724 | # | ||
| 725 | # CONFIG_KEYS is not set | ||
| 726 | # CONFIG_SECURITY is not set | ||
| 727 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
| 728 | CONFIG_CRYPTO=y | ||
| 729 | CONFIG_CRYPTO_ALGAPI=y | ||
| 730 | CONFIG_CRYPTO_BLKCIPHER=y | ||
| 731 | CONFIG_CRYPTO_MANAGER=y | ||
| 732 | # CONFIG_CRYPTO_HMAC is not set | ||
| 733 | # CONFIG_CRYPTO_XCBC is not set | ||
| 734 | # CONFIG_CRYPTO_NULL is not set | ||
| 735 | # CONFIG_CRYPTO_MD4 is not set | ||
| 736 | CONFIG_CRYPTO_MD5=y | ||
| 737 | # CONFIG_CRYPTO_SHA1 is not set | ||
| 738 | # CONFIG_CRYPTO_SHA256 is not set | ||
| 739 | # CONFIG_CRYPTO_SHA512 is not set | ||
| 740 | # CONFIG_CRYPTO_WP512 is not set | ||
| 741 | # CONFIG_CRYPTO_TGR192 is not set | ||
| 742 | # CONFIG_CRYPTO_GF128MUL is not set | ||
| 743 | # CONFIG_CRYPTO_ECB is not set | ||
| 744 | CONFIG_CRYPTO_CBC=y | ||
| 745 | # CONFIG_CRYPTO_PCBC is not set | ||
| 746 | # CONFIG_CRYPTO_LRW is not set | ||
| 747 | # CONFIG_CRYPTO_XTS is not set | ||
| 748 | # CONFIG_CRYPTO_CRYPTD is not set | ||
| 749 | CONFIG_CRYPTO_DES=y | ||
| 750 | # CONFIG_CRYPTO_FCRYPT is not set | ||
| 751 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
| 752 | # CONFIG_CRYPTO_TWOFISH is not set | ||
| 753 | # CONFIG_CRYPTO_SERPENT is not set | ||
| 754 | # CONFIG_CRYPTO_AES is not set | ||
| 755 | # CONFIG_CRYPTO_CAST5 is not set | ||
| 756 | # CONFIG_CRYPTO_CAST6 is not set | ||
| 757 | # CONFIG_CRYPTO_TEA is not set | ||
| 758 | # CONFIG_CRYPTO_ARC4 is not set | ||
| 759 | # CONFIG_CRYPTO_KHAZAD is not set | ||
| 760 | # CONFIG_CRYPTO_ANUBIS is not set | ||
| 761 | # CONFIG_CRYPTO_SEED is not set | ||
| 762 | # CONFIG_CRYPTO_DEFLATE is not set | ||
| 763 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
| 764 | # CONFIG_CRYPTO_CRC32C is not set | ||
| 765 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
| 766 | # CONFIG_CRYPTO_TEST is not set | ||
| 767 | # CONFIG_CRYPTO_AUTHENC is not set | ||
| 768 | CONFIG_CRYPTO_HW=y | ||
| 769 | |||
| 770 | # | ||
| 771 | # Library routines | ||
| 772 | # | ||
| 773 | CONFIG_BITREVERSE=y | ||
| 774 | CONFIG_CRC_CCITT=y | ||
| 775 | # CONFIG_CRC16 is not set | ||
| 776 | # CONFIG_CRC_ITU_T is not set | ||
| 777 | CONFIG_CRC32=y | ||
| 778 | # CONFIG_CRC7 is not set | ||
| 779 | # CONFIG_LIBCRC32C is not set | ||
| 780 | CONFIG_PLIST=y | ||
| 781 | CONFIG_HAS_IOMEM=y | ||
| 782 | CONFIG_HAS_IOPORT=y | ||
| 783 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig new file mode 100644 index 000000000000..733b851e5b7e --- /dev/null +++ b/arch/arm/configs/pxa3xx_defconfig | |||
| @@ -0,0 +1,1332 @@ | |||
| 1 | # | ||
| 2 | # Automatically generated make config: don't edit | ||
| 3 | # Linux kernel version: 2.6.31-rc1 | ||
| 4 | # Mon Jul 13 22:48:49 2009 | ||
| 5 | # | ||
| 6 | CONFIG_ARM=y | ||
| 7 | CONFIG_HAVE_PWM=y | ||
| 8 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
| 9 | CONFIG_GENERIC_GPIO=y | ||
| 10 | CONFIG_GENERIC_TIME=y | ||
| 11 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
| 12 | CONFIG_MMU=y | ||
| 13 | CONFIG_GENERIC_HARDIRQS=y | ||
| 14 | CONFIG_STACKTRACE_SUPPORT=y | ||
| 15 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y | ||
| 16 | CONFIG_LOCKDEP_SUPPORT=y | ||
| 17 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
| 18 | CONFIG_HARDIRQS_SW_RESEND=y | ||
| 19 | CONFIG_GENERIC_IRQ_PROBE=y | ||
| 20 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
| 21 | CONFIG_GENERIC_HWEIGHT=y | ||
| 22 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
| 23 | CONFIG_ARCH_MTD_XIP=y | ||
| 24 | CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y | ||
| 25 | CONFIG_VECTORS_BASE=0xffff0000 | ||
| 26 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
| 27 | CONFIG_CONSTRUCTORS=y | ||
| 28 | |||
| 29 | # | ||
| 30 | # General setup | ||
| 31 | # | ||
| 32 | CONFIG_EXPERIMENTAL=y | ||
| 33 | CONFIG_BROKEN_ON_SMP=y | ||
| 34 | CONFIG_LOCK_KERNEL=y | ||
| 35 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
| 36 | CONFIG_LOCALVERSION="" | ||
| 37 | CONFIG_LOCALVERSION_AUTO=y | ||
| 38 | CONFIG_SWAP=y | ||
| 39 | CONFIG_SYSVIPC=y | ||
| 40 | CONFIG_SYSVIPC_SYSCTL=y | ||
| 41 | # CONFIG_POSIX_MQUEUE is not set | ||
| 42 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
| 43 | # CONFIG_TASKSTATS is not set | ||
| 44 | # CONFIG_AUDIT is not set | ||
| 45 | |||
| 46 | # | ||
| 47 | # RCU Subsystem | ||
| 48 | # | ||
| 49 | # CONFIG_CLASSIC_RCU is not set | ||
| 50 | CONFIG_TREE_RCU=y | ||
| 51 | # CONFIG_PREEMPT_RCU is not set | ||
| 52 | # CONFIG_RCU_TRACE is not set | ||
| 53 | CONFIG_RCU_FANOUT=32 | ||
| 54 | # CONFIG_RCU_FANOUT_EXACT is not set | ||
| 55 | # CONFIG_TREE_RCU_TRACE is not set | ||
| 56 | # CONFIG_PREEMPT_RCU_TRACE is not set | ||
| 57 | # CONFIG_IKCONFIG is not set | ||
| 58 | CONFIG_LOG_BUF_SHIFT=18 | ||
| 59 | CONFIG_GROUP_SCHED=y | ||
| 60 | CONFIG_FAIR_GROUP_SCHED=y | ||
| 61 | # CONFIG_RT_GROUP_SCHED is not set | ||
| 62 | CONFIG_USER_SCHED=y | ||
| 63 | # CONFIG_CGROUP_SCHED is not set | ||
| 64 | # CONFIG_CGROUPS is not set | ||
| 65 | CONFIG_SYSFS_DEPRECATED=y | ||
| 66 | CONFIG_SYSFS_DEPRECATED_V2=y | ||
| 67 | # CONFIG_RELAY is not set | ||
| 68 | CONFIG_NAMESPACES=y | ||
| 69 | # CONFIG_UTS_NS is not set | ||
| 70 | # CONFIG_IPC_NS is not set | ||
| 71 | # CONFIG_USER_NS is not set | ||
| 72 | # CONFIG_PID_NS is not set | ||
| 73 | # CONFIG_NET_NS is not set | ||
| 74 | # CONFIG_BLK_DEV_INITRD is not set | ||
| 75 | # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set | ||
| 76 | CONFIG_SYSCTL=y | ||
| 77 | CONFIG_ANON_INODES=y | ||
| 78 | # CONFIG_EMBEDDED is not set | ||
| 79 | CONFIG_UID16=y | ||
| 80 | CONFIG_SYSCTL_SYSCALL=y | ||
| 81 | CONFIG_KALLSYMS=y | ||
| 82 | CONFIG_KALLSYMS_ALL=y | ||
| 83 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
| 84 | CONFIG_HOTPLUG=y | ||
| 85 | CONFIG_PRINTK=y | ||
| 86 | CONFIG_BUG=y | ||
| 87 | CONFIG_ELF_CORE=y | ||
| 88 | CONFIG_BASE_FULL=y | ||
| 89 | CONFIG_FUTEX=y | ||
| 90 | CONFIG_EPOLL=y | ||
| 91 | CONFIG_SIGNALFD=y | ||
| 92 | CONFIG_TIMERFD=y | ||
| 93 | CONFIG_EVENTFD=y | ||
| 94 | CONFIG_SHMEM=y | ||
| 95 | CONFIG_AIO=y | ||
| 96 | |||
| 97 | # | ||
| 98 | # Performance Counters | ||
| 99 | # | ||
| 100 | CONFIG_VM_EVENT_COUNTERS=y | ||
| 101 | # CONFIG_STRIP_ASM_SYMS is not set | ||
| 102 | CONFIG_COMPAT_BRK=y | ||
| 103 | CONFIG_SLAB=y | ||
| 104 | # CONFIG_SLUB is not set | ||
| 105 | # CONFIG_SLOB is not set | ||
| 106 | # CONFIG_PROFILING is not set | ||
| 107 | # CONFIG_MARKERS is not set | ||
| 108 | CONFIG_HAVE_OPROFILE=y | ||
| 109 | # CONFIG_KPROBES is not set | ||
| 110 | CONFIG_HAVE_KPROBES=y | ||
| 111 | CONFIG_HAVE_KRETPROBES=y | ||
| 112 | CONFIG_HAVE_CLK=y | ||
| 113 | |||
| 114 | # | ||
| 115 | # GCOV-based kernel profiling | ||
| 116 | # | ||
| 117 | # CONFIG_SLOW_WORK is not set | ||
| 118 | CONFIG_HAVE_GENERIC_DMA_COHERENT=y | ||
| 119 | CONFIG_SLABINFO=y | ||
| 120 | CONFIG_RT_MUTEXES=y | ||
| 121 | CONFIG_BASE_SMALL=0 | ||
| 122 | CONFIG_MODULES=y | ||
| 123 | # CONFIG_MODULE_FORCE_LOAD is not set | ||
| 124 | # CONFIG_MODULE_UNLOAD is not set | ||
| 125 | # CONFIG_MODVERSIONS is not set | ||
| 126 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
| 127 | CONFIG_BLOCK=y | ||
| 128 | CONFIG_LBDAF=y | ||
| 129 | # CONFIG_BLK_DEV_BSG is not set | ||
| 130 | # CONFIG_BLK_DEV_INTEGRITY is not set | ||
| 131 | |||
| 132 | # | ||
| 133 | # IO Schedulers | ||
| 134 | # | ||
| 135 | CONFIG_IOSCHED_NOOP=y | ||
| 136 | CONFIG_IOSCHED_AS=y | ||
| 137 | CONFIG_IOSCHED_DEADLINE=y | ||
| 138 | CONFIG_IOSCHED_CFQ=y | ||
| 139 | # CONFIG_DEFAULT_AS is not set | ||
| 140 | # CONFIG_DEFAULT_DEADLINE is not set | ||
| 141 | CONFIG_DEFAULT_CFQ=y | ||
| 142 | # CONFIG_DEFAULT_NOOP is not set | ||
| 143 | CONFIG_DEFAULT_IOSCHED="cfq" | ||
| 144 | # CONFIG_FREEZER is not set | ||
| 145 | |||
| 146 | # | ||
| 147 | # System Type | ||
| 148 | # | ||
| 149 | # CONFIG_ARCH_AAEC2000 is not set | ||
| 150 | # CONFIG_ARCH_INTEGRATOR is not set | ||
| 151 | # CONFIG_ARCH_REALVIEW is not set | ||
| 152 | # CONFIG_ARCH_VERSATILE is not set | ||
| 153 | # CONFIG_ARCH_AT91 is not set | ||
| 154 | # CONFIG_ARCH_CLPS711X is not set | ||
| 155 | # CONFIG_ARCH_GEMINI is not set | ||
| 156 | # CONFIG_ARCH_EBSA110 is not set | ||
| 157 | # CONFIG_ARCH_EP93XX is not set | ||
| 158 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
| 159 | # CONFIG_ARCH_MXC is not set | ||
| 160 | # CONFIG_ARCH_STMP3XXX is not set | ||
| 161 | # CONFIG_ARCH_NETX is not set | ||
| 162 | # CONFIG_ARCH_H720X is not set | ||
| 163 | # CONFIG_ARCH_IOP13XX is not set | ||
| 164 | # CONFIG_ARCH_IOP32X is not set | ||
| 165 | # CONFIG_ARCH_IOP33X is not set | ||
| 166 | # CONFIG_ARCH_IXP23XX is not set | ||
| 167 | # CONFIG_ARCH_IXP2000 is not set | ||
| 168 | # CONFIG_ARCH_IXP4XX is not set | ||
| 169 | # CONFIG_ARCH_L7200 is not set | ||
| 170 | # CONFIG_ARCH_KIRKWOOD is not set | ||
| 171 | # CONFIG_ARCH_LOKI is not set | ||
| 172 | # CONFIG_ARCH_MV78XX0 is not set | ||
| 173 | # CONFIG_ARCH_ORION5X is not set | ||
| 174 | # CONFIG_ARCH_MMP is not set | ||
| 175 | # CONFIG_ARCH_KS8695 is not set | ||
| 176 | # CONFIG_ARCH_NS9XXX is not set | ||
| 177 | # CONFIG_ARCH_W90X900 is not set | ||
| 178 | # CONFIG_ARCH_PNX4008 is not set | ||
| 179 | CONFIG_ARCH_PXA=y | ||
| 180 | # CONFIG_ARCH_MSM is not set | ||
| 181 | # CONFIG_ARCH_RPC is not set | ||
| 182 | # CONFIG_ARCH_SA1100 is not set | ||
| 183 | # CONFIG_ARCH_S3C2410 is not set | ||
| 184 | # CONFIG_ARCH_S3C64XX is not set | ||
| 185 | # CONFIG_ARCH_SHARK is not set | ||
| 186 | # CONFIG_ARCH_LH7A40X is not set | ||
| 187 | # CONFIG_ARCH_U300 is not set | ||
| 188 | # CONFIG_ARCH_DAVINCI is not set | ||
| 189 | # CONFIG_ARCH_OMAP is not set | ||
| 190 | |||
| 191 | # | ||
| 192 | # Intel PXA2xx/PXA3xx Implementations | ||
| 193 | # | ||
| 194 | |||
| 195 | # | ||
| 196 | # Supported PXA3xx Processor Variants | ||
| 197 | # | ||
| 198 | CONFIG_CPU_PXA300=y | ||
| 199 | CONFIG_CPU_PXA310=y | ||
| 200 | CONFIG_CPU_PXA320=y | ||
| 201 | CONFIG_CPU_PXA930=y | ||
| 202 | CONFIG_CPU_PXA935=y | ||
| 203 | # CONFIG_ARCH_GUMSTIX is not set | ||
| 204 | # CONFIG_MACH_INTELMOTE2 is not set | ||
| 205 | # CONFIG_MACH_STARGATE2 is not set | ||
| 206 | # CONFIG_ARCH_LUBBOCK is not set | ||
| 207 | # CONFIG_MACH_LOGICPD_PXA270 is not set | ||
| 208 | # CONFIG_MACH_MAINSTONE is not set | ||
| 209 | # CONFIG_MACH_MP900C is not set | ||
| 210 | # CONFIG_ARCH_PXA_IDP is not set | ||
| 211 | # CONFIG_PXA_SHARPSL is not set | ||
| 212 | # CONFIG_ARCH_VIPER is not set | ||
| 213 | # CONFIG_ARCH_PXA_ESERIES is not set | ||
| 214 | # CONFIG_TRIZEPS_PXA is not set | ||
| 215 | # CONFIG_MACH_H5000 is not set | ||
| 216 | # CONFIG_MACH_EM_X270 is not set | ||
| 217 | # CONFIG_MACH_EXEDA is not set | ||
| 218 | # CONFIG_MACH_COLIBRI is not set | ||
| 219 | # CONFIG_MACH_COLIBRI300 is not set | ||
| 220 | # CONFIG_MACH_COLIBRI320 is not set | ||
| 221 | CONFIG_MACH_ZYLONITE=y | ||
| 222 | CONFIG_MACH_LITTLETON=y | ||
| 223 | CONFIG_MACH_TAVOREVB=y | ||
| 224 | CONFIG_MACH_SAAR=y | ||
| 225 | # CONFIG_MACH_ARMCORE is not set | ||
| 226 | # CONFIG_MACH_CM_X300 is not set | ||
| 227 | # CONFIG_MACH_H4700 is not set | ||
| 228 | # CONFIG_MACH_MAGICIAN is not set | ||
| 229 | # CONFIG_MACH_HIMALAYA is not set | ||
| 230 | # CONFIG_MACH_MIOA701 is not set | ||
| 231 | # CONFIG_MACH_PCM027 is not set | ||
| 232 | # CONFIG_ARCH_PXA_PALM is not set | ||
| 233 | # CONFIG_MACH_CSB726 is not set | ||
| 234 | # CONFIG_PXA_EZX is not set | ||
| 235 | CONFIG_PXA3xx=y | ||
| 236 | CONFIG_PXA_SSP=y | ||
| 237 | CONFIG_PXA_HAVE_BOARD_IRQS=y | ||
| 238 | CONFIG_PLAT_PXA=y | ||
| 239 | |||
| 240 | # | ||
| 241 | # Processor Type | ||
| 242 | # | ||
| 243 | CONFIG_CPU_32=y | ||
| 244 | CONFIG_CPU_XSC3=y | ||
| 245 | CONFIG_CPU_32v5=y | ||
| 246 | CONFIG_CPU_ABRT_EV5T=y | ||
| 247 | CONFIG_CPU_PABRT_NOIFAR=y | ||
| 248 | CONFIG_CPU_CACHE_VIVT=y | ||
| 249 | CONFIG_CPU_TLB_V4WBI=y | ||
| 250 | CONFIG_CPU_CP15=y | ||
| 251 | CONFIG_CPU_CP15_MMU=y | ||
| 252 | CONFIG_IO_36=y | ||
| 253 | |||
| 254 | # | ||
| 255 | # Processor Features | ||
| 256 | # | ||
| 257 | CONFIG_ARM_THUMB=y | ||
| 258 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
| 259 | # CONFIG_CPU_BPREDICT_DISABLE is not set | ||
| 260 | CONFIG_OUTER_CACHE=y | ||
| 261 | CONFIG_CACHE_XSC3L2=y | ||
| 262 | CONFIG_IWMMXT=y | ||
| 263 | CONFIG_COMMON_CLKDEV=y | ||
| 264 | |||
| 265 | # | ||
| 266 | # Bus support | ||
| 267 | # | ||
| 268 | # CONFIG_PCI_SYSCALL is not set | ||
| 269 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
| 270 | # CONFIG_PCCARD is not set | ||
| 271 | |||
| 272 | # | ||
| 273 | # Kernel Features | ||
| 274 | # | ||
| 275 | CONFIG_TICK_ONESHOT=y | ||
| 276 | # CONFIG_NO_HZ is not set | ||
| 277 | # CONFIG_HIGH_RES_TIMERS is not set | ||
| 278 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
| 279 | CONFIG_VMSPLIT_3G=y | ||
| 280 | # CONFIG_VMSPLIT_2G is not set | ||
| 281 | # CONFIG_VMSPLIT_1G is not set | ||
| 282 | CONFIG_PAGE_OFFSET=0xC0000000 | ||
| 283 | CONFIG_PREEMPT=y | ||
| 284 | CONFIG_HZ=100 | ||
| 285 | CONFIG_AEABI=y | ||
| 286 | CONFIG_OABI_COMPAT=y | ||
| 287 | # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set | ||
| 288 | # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set | ||
| 289 | # CONFIG_HIGHMEM is not set | ||
| 290 | CONFIG_SELECT_MEMORY_MODEL=y | ||
| 291 | CONFIG_FLATMEM_MANUAL=y | ||
| 292 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
| 293 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
| 294 | CONFIG_FLATMEM=y | ||
| 295 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
| 296 | CONFIG_PAGEFLAGS_EXTENDED=y | ||
| 297 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
| 298 | # CONFIG_PHYS_ADDR_T_64BIT is not set | ||
| 299 | CONFIG_ZONE_DMA_FLAG=0 | ||
| 300 | CONFIG_VIRT_TO_BUS=y | ||
| 301 | CONFIG_HAVE_MLOCK=y | ||
| 302 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y | ||
| 303 | CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 | ||
| 304 | CONFIG_ALIGNMENT_TRAP=y | ||
| 305 | # CONFIG_UACCESS_WITH_MEMCPY is not set | ||
| 306 | |||
| 307 | # | ||
| 308 | # Boot options | ||
| 309 | # | ||
| 310 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
| 311 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
| 312 | CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug" | ||
| 313 | # CONFIG_XIP_KERNEL is not set | ||
| 314 | # CONFIG_KEXEC is not set | ||
| 315 | |||
| 316 | # | ||
| 317 | # CPU Power Management | ||
| 318 | # | ||
| 319 | # CONFIG_CPU_FREQ is not set | ||
| 320 | # CONFIG_CPU_IDLE is not set | ||
| 321 | |||
| 322 | # | ||
| 323 | # Floating point emulation | ||
| 324 | # | ||
| 325 | |||
| 326 | # | ||
| 327 | # At least one emulation must be selected | ||
| 328 | # | ||
| 329 | CONFIG_FPE_NWFPE=y | ||
| 330 | # CONFIG_FPE_NWFPE_XP is not set | ||
| 331 | # CONFIG_FPE_FASTFPE is not set | ||
| 332 | |||
| 333 | # | ||
| 334 | # Userspace binary formats | ||
| 335 | # | ||
| 336 | CONFIG_BINFMT_ELF=y | ||
| 337 | # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set | ||
| 338 | CONFIG_HAVE_AOUT=y | ||
| 339 | # CONFIG_BINFMT_AOUT is not set | ||
| 340 | # CONFIG_BINFMT_MISC is not set | ||
| 341 | |||
| 342 | # | ||
| 343 | # Power management options | ||
| 344 | # | ||
| 345 | # CONFIG_PM is not set | ||
| 346 | CONFIG_ARCH_SUSPEND_POSSIBLE=y | ||
| 347 | CONFIG_NET=y | ||
| 348 | |||
| 349 | # | ||
| 350 | # Networking options | ||
| 351 | # | ||
| 352 | CONFIG_PACKET=y | ||
| 353 | # CONFIG_PACKET_MMAP is not set | ||
| 354 | CONFIG_UNIX=y | ||
| 355 | # CONFIG_NET_KEY is not set | ||
| 356 | CONFIG_INET=y | ||
| 357 | # CONFIG_IP_MULTICAST is not set | ||
| 358 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
| 359 | CONFIG_IP_FIB_HASH=y | ||
| 360 | CONFIG_IP_PNP=y | ||
| 361 | # CONFIG_IP_PNP_DHCP is not set | ||
| 362 | # CONFIG_IP_PNP_BOOTP is not set | ||
| 363 | # CONFIG_IP_PNP_RARP is not set | ||
| 364 | # CONFIG_NET_IPIP is not set | ||
| 365 | # CONFIG_NET_IPGRE is not set | ||
| 366 | # CONFIG_ARPD is not set | ||
| 367 | # CONFIG_SYN_COOKIES is not set | ||
| 368 | # CONFIG_INET_AH is not set | ||
| 369 | # CONFIG_INET_ESP is not set | ||
| 370 | # CONFIG_INET_IPCOMP is not set | ||
| 371 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
| 372 | # CONFIG_INET_TUNNEL is not set | ||
| 373 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
| 374 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
| 375 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
| 376 | # CONFIG_INET_LRO is not set | ||
| 377 | # CONFIG_INET_DIAG is not set | ||
| 378 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
| 379 | CONFIG_TCP_CONG_CUBIC=y | ||
| 380 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
| 381 | # CONFIG_TCP_MD5SIG is not set | ||
| 382 | # CONFIG_IPV6 is not set | ||
| 383 | # CONFIG_NETWORK_SECMARK is not set | ||
| 384 | # CONFIG_NETFILTER is not set | ||
| 385 | # CONFIG_IP_DCCP is not set | ||
| 386 | # CONFIG_IP_SCTP is not set | ||
| 387 | # CONFIG_TIPC is not set | ||
| 388 | # CONFIG_ATM is not set | ||
| 389 | # CONFIG_BRIDGE is not set | ||
| 390 | # CONFIG_NET_DSA is not set | ||
| 391 | # CONFIG_VLAN_8021Q is not set | ||
| 392 | # CONFIG_DECNET is not set | ||
| 393 | # CONFIG_LLC2 is not set | ||
| 394 | # CONFIG_IPX is not set | ||
| 395 | # CONFIG_ATALK is not set | ||
| 396 | # CONFIG_X25 is not set | ||
| 397 | # CONFIG_LAPB is not set | ||
| 398 | # CONFIG_ECONET is not set | ||
| 399 | # CONFIG_WAN_ROUTER is not set | ||
| 400 | # CONFIG_PHONET is not set | ||
| 401 | # CONFIG_IEEE802154 is not set | ||
| 402 | # CONFIG_NET_SCHED is not set | ||
| 403 | # CONFIG_DCB is not set | ||
| 404 | |||
| 405 | # | ||
| 406 | # Network testing | ||
| 407 | # | ||
| 408 | # CONFIG_NET_PKTGEN is not set | ||
| 409 | # CONFIG_HAMRADIO is not set | ||
| 410 | # CONFIG_CAN is not set | ||
| 411 | # CONFIG_IRDA is not set | ||
| 412 | # CONFIG_BT is not set | ||
| 413 | # CONFIG_AF_RXRPC is not set | ||
| 414 | # CONFIG_WIRELESS is not set | ||
| 415 | # CONFIG_WIMAX is not set | ||
| 416 | # CONFIG_RFKILL is not set | ||
| 417 | # CONFIG_NET_9P is not set | ||
| 418 | |||
| 419 | # | ||
| 420 | # Device Drivers | ||
| 421 | # | ||
| 422 | |||
| 423 | # | ||
| 424 | # Generic Driver Options | ||
| 425 | # | ||
| 426 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
| 427 | # CONFIG_STANDALONE is not set | ||
| 428 | # CONFIG_PREVENT_FIRMWARE_BUILD is not set | ||
| 429 | CONFIG_FW_LOADER=y | ||
| 430 | CONFIG_FIRMWARE_IN_KERNEL=y | ||
| 431 | CONFIG_EXTRA_FIRMWARE="" | ||
| 432 | # CONFIG_DEBUG_DRIVER is not set | ||
| 433 | # CONFIG_DEBUG_DEVRES is not set | ||
| 434 | # CONFIG_SYS_HYPERVISOR is not set | ||
| 435 | # CONFIG_CONNECTOR is not set | ||
| 436 | CONFIG_MTD=y | ||
| 437 | # CONFIG_MTD_DEBUG is not set | ||
| 438 | CONFIG_MTD_CONCAT=y | ||
| 439 | CONFIG_MTD_PARTITIONS=y | ||
| 440 | # CONFIG_MTD_TESTS is not set | ||
| 441 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
| 442 | # CONFIG_MTD_CMDLINE_PARTS is not set | ||
| 443 | # CONFIG_MTD_AFS_PARTS is not set | ||
| 444 | # CONFIG_MTD_AR7_PARTS is not set | ||
| 445 | |||
| 446 | # | ||
| 447 | # User Modules And Translation Layers | ||
| 448 | # | ||
| 449 | CONFIG_MTD_CHAR=y | ||
| 450 | CONFIG_MTD_BLKDEVS=y | ||
| 451 | CONFIG_MTD_BLOCK=y | ||
| 452 | # CONFIG_FTL is not set | ||
| 453 | # CONFIG_NFTL is not set | ||
| 454 | # CONFIG_INFTL is not set | ||
| 455 | # CONFIG_RFD_FTL is not set | ||
| 456 | # CONFIG_SSFDC is not set | ||
| 457 | # CONFIG_MTD_OOPS is not set | ||
| 458 | |||
| 459 | # | ||
| 460 | # RAM/ROM/Flash chip drivers | ||
| 461 | # | ||
| 462 | # CONFIG_MTD_CFI is not set | ||
| 463 | # CONFIG_MTD_JEDECPROBE is not set | ||
| 464 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
| 465 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
| 466 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
| 467 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
| 468 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
| 469 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
| 470 | CONFIG_MTD_CFI_I1=y | ||
| 471 | CONFIG_MTD_CFI_I2=y | ||
| 472 | # CONFIG_MTD_CFI_I4 is not set | ||
| 473 | # CONFIG_MTD_CFI_I8 is not set | ||
| 474 | # CONFIG_MTD_RAM is not set | ||
| 475 | # CONFIG_MTD_ROM is not set | ||
| 476 | # CONFIG_MTD_ABSENT is not set | ||
| 477 | |||
| 478 | # | ||
| 479 | # Mapping drivers for chip access | ||
| 480 | # | ||
| 481 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
| 482 | # CONFIG_MTD_PLATRAM is not set | ||
| 483 | |||
| 484 | # | ||
| 485 | # Self-contained MTD device drivers | ||
| 486 | # | ||
| 487 | # CONFIG_MTD_DATAFLASH is not set | ||
| 488 | # CONFIG_MTD_M25P80 is not set | ||
| 489 | # CONFIG_MTD_SLRAM is not set | ||
| 490 | # CONFIG_MTD_PHRAM is not set | ||
| 491 | # CONFIG_MTD_MTDRAM is not set | ||
| 492 | # CONFIG_MTD_BLOCK2MTD is not set | ||
| 493 | |||
| 494 | # | ||
| 495 | # Disk-On-Chip Device Drivers | ||
| 496 | # | ||
| 497 | # CONFIG_MTD_DOC2000 is not set | ||
| 498 | # CONFIG_MTD_DOC2001 is not set | ||
| 499 | # CONFIG_MTD_DOC2001PLUS is not set | ||
| 500 | CONFIG_MTD_NAND=y | ||
| 501 | CONFIG_MTD_NAND_VERIFY_WRITE=y | ||
| 502 | # CONFIG_MTD_NAND_ECC_SMC is not set | ||
| 503 | # CONFIG_MTD_NAND_MUSEUM_IDS is not set | ||
| 504 | # CONFIG_MTD_NAND_H1900 is not set | ||
| 505 | # CONFIG_MTD_NAND_GPIO is not set | ||
| 506 | CONFIG_MTD_NAND_IDS=y | ||
| 507 | # CONFIG_MTD_NAND_DISKONCHIP is not set | ||
| 508 | # CONFIG_MTD_NAND_SHARPSL is not set | ||
| 509 | CONFIG_MTD_NAND_PXA3xx=y | ||
| 510 | CONFIG_MTD_NAND_PXA3xx_BUILTIN=y | ||
| 511 | # CONFIG_MTD_NAND_NANDSIM is not set | ||
| 512 | # CONFIG_MTD_NAND_PLATFORM is not set | ||
| 513 | CONFIG_MTD_ONENAND=y | ||
| 514 | CONFIG_MTD_ONENAND_VERIFY_WRITE=y | ||
| 515 | CONFIG_MTD_ONENAND_GENERIC=y | ||
| 516 | # CONFIG_MTD_ONENAND_OTP is not set | ||
| 517 | # CONFIG_MTD_ONENAND_2X_PROGRAM is not set | ||
| 518 | # CONFIG_MTD_ONENAND_SIM is not set | ||
| 519 | |||
| 520 | # | ||
| 521 | # LPDDR flash memory drivers | ||
| 522 | # | ||
| 523 | # CONFIG_MTD_LPDDR is not set | ||
| 524 | |||
| 525 | # | ||
| 526 | # UBI - Unsorted block images | ||
| 527 | # | ||
| 528 | # CONFIG_MTD_UBI is not set | ||
| 529 | # CONFIG_PARPORT is not set | ||
| 530 | CONFIG_BLK_DEV=y | ||
| 531 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
| 532 | CONFIG_BLK_DEV_LOOP=y | ||
| 533 | # CONFIG_BLK_DEV_CRYPTOLOOP is not set | ||
| 534 | # CONFIG_BLK_DEV_NBD is not set | ||
| 535 | CONFIG_BLK_DEV_RAM=y | ||
| 536 | CONFIG_BLK_DEV_RAM_COUNT=16 | ||
| 537 | CONFIG_BLK_DEV_RAM_SIZE=4096 | ||
| 538 | # CONFIG_BLK_DEV_XIP is not set | ||
| 539 | # CONFIG_CDROM_PKTCDVD is not set | ||
| 540 | # CONFIG_ATA_OVER_ETH is not set | ||
| 541 | # CONFIG_MG_DISK is not set | ||
| 542 | # CONFIG_MISC_DEVICES is not set | ||
| 543 | CONFIG_HAVE_IDE=y | ||
| 544 | # CONFIG_IDE is not set | ||
| 545 | |||
| 546 | # | ||
| 547 | # SCSI device support | ||
| 548 | # | ||
| 549 | # CONFIG_RAID_ATTRS is not set | ||
| 550 | # CONFIG_SCSI is not set | ||
| 551 | # CONFIG_SCSI_DMA is not set | ||
| 552 | # CONFIG_SCSI_NETLINK is not set | ||
| 553 | # CONFIG_ATA is not set | ||
| 554 | # CONFIG_MD is not set | ||
| 555 | CONFIG_NETDEVICES=y | ||
| 556 | # CONFIG_DUMMY is not set | ||
| 557 | # CONFIG_BONDING is not set | ||
| 558 | # CONFIG_MACVLAN is not set | ||
| 559 | # CONFIG_EQUALIZER is not set | ||
| 560 | # CONFIG_TUN is not set | ||
| 561 | # CONFIG_VETH is not set | ||
| 562 | # CONFIG_PHYLIB is not set | ||
| 563 | CONFIG_NET_ETHERNET=y | ||
| 564 | CONFIG_MII=y | ||
| 565 | # CONFIG_AX88796 is not set | ||
| 566 | CONFIG_SMC91X=y | ||
| 567 | # CONFIG_DM9000 is not set | ||
| 568 | # CONFIG_ENC28J60 is not set | ||
| 569 | # CONFIG_ETHOC is not set | ||
| 570 | # CONFIG_SMC911X is not set | ||
| 571 | # CONFIG_SMSC911X is not set | ||
| 572 | # CONFIG_DNET is not set | ||
| 573 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
| 574 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
| 575 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
| 576 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
| 577 | # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set | ||
| 578 | # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set | ||
| 579 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set | ||
| 580 | # CONFIG_B44 is not set | ||
| 581 | # CONFIG_KS8842 is not set | ||
| 582 | # CONFIG_NETDEV_1000 is not set | ||
| 583 | # CONFIG_NETDEV_10000 is not set | ||
| 584 | |||
| 585 | # | ||
| 586 | # Wireless LAN | ||
| 587 | # | ||
| 588 | # CONFIG_WLAN_PRE80211 is not set | ||
| 589 | # CONFIG_WLAN_80211 is not set | ||
| 590 | |||
| 591 | # | ||
| 592 | # Enable WiMAX (Networking options) to see the WiMAX drivers | ||
| 593 | # | ||
| 594 | # CONFIG_WAN is not set | ||
| 595 | # CONFIG_PPP is not set | ||
| 596 | # CONFIG_SLIP is not set | ||
| 597 | # CONFIG_NETCONSOLE is not set | ||
| 598 | # CONFIG_NETPOLL is not set | ||
| 599 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
| 600 | # CONFIG_ISDN is not set | ||
| 601 | |||
| 602 | # | ||
| 603 | # Input device support | ||
| 604 | # | ||
| 605 | CONFIG_INPUT=y | ||
| 606 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
| 607 | # CONFIG_INPUT_POLLDEV is not set | ||
| 608 | |||
| 609 | # | ||
| 610 | # Userland interfaces | ||
| 611 | # | ||
| 612 | CONFIG_INPUT_MOUSEDEV=y | ||
| 613 | # CONFIG_INPUT_MOUSEDEV_PSAUX is not set | ||
| 614 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
| 615 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
| 616 | # CONFIG_INPUT_JOYDEV is not set | ||
| 617 | # CONFIG_INPUT_EVDEV is not set | ||
| 618 | # CONFIG_INPUT_EVBUG is not set | ||
| 619 | |||
| 620 | # | ||
| 621 | # Input Device Drivers | ||
| 622 | # | ||
| 623 | CONFIG_INPUT_KEYBOARD=y | ||
| 624 | # CONFIG_KEYBOARD_ATKBD is not set | ||
| 625 | # CONFIG_KEYBOARD_SUNKBD is not set | ||
| 626 | # CONFIG_KEYBOARD_LKKBD is not set | ||
| 627 | # CONFIG_KEYBOARD_XTKBD is not set | ||
| 628 | # CONFIG_KEYBOARD_NEWTON is not set | ||
| 629 | # CONFIG_KEYBOARD_STOWAWAY is not set | ||
| 630 | # CONFIG_KEYBOARD_LM8323 is not set | ||
| 631 | CONFIG_KEYBOARD_PXA27x=y | ||
| 632 | CONFIG_KEYBOARD_PXA930_ROTARY=y | ||
| 633 | CONFIG_KEYBOARD_GPIO=y | ||
| 634 | CONFIG_INPUT_MOUSE=y | ||
| 635 | CONFIG_MOUSE_PS2=y | ||
| 636 | CONFIG_MOUSE_PS2_ALPS=y | ||
| 637 | CONFIG_MOUSE_PS2_LOGIPS2PP=y | ||
| 638 | CONFIG_MOUSE_PS2_SYNAPTICS=y | ||
| 639 | CONFIG_MOUSE_PS2_TRACKPOINT=y | ||
| 640 | # CONFIG_MOUSE_PS2_ELANTECH is not set | ||
| 641 | # CONFIG_MOUSE_PS2_TOUCHKIT is not set | ||
| 642 | # CONFIG_MOUSE_SERIAL is not set | ||
| 643 | # CONFIG_MOUSE_VSXXXAA is not set | ||
| 644 | # CONFIG_MOUSE_GPIO is not set | ||
| 645 | CONFIG_MOUSE_PXA930_TRKBALL=y | ||
| 646 | # CONFIG_MOUSE_SYNAPTICS_I2C is not set | ||
| 647 | # CONFIG_INPUT_JOYSTICK is not set | ||
| 648 | # CONFIG_INPUT_TABLET is not set | ||
| 649 | CONFIG_INPUT_TOUCHSCREEN=y | ||
| 650 | # CONFIG_TOUCHSCREEN_ADS7846 is not set | ||
| 651 | # CONFIG_TOUCHSCREEN_AD7877 is not set | ||
| 652 | # CONFIG_TOUCHSCREEN_AD7879_I2C is not set | ||
| 653 | # CONFIG_TOUCHSCREEN_AD7879_SPI is not set | ||
| 654 | # CONFIG_TOUCHSCREEN_AD7879 is not set | ||
| 655 | CONFIG_TOUCHSCREEN_DA9034=y | ||
| 656 | # CONFIG_TOUCHSCREEN_EETI is not set | ||
| 657 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | ||
| 658 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
| 659 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
| 660 | # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set | ||
| 661 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
| 662 | # CONFIG_TOUCHSCREEN_INEXIO is not set | ||
| 663 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
| 664 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
| 665 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
| 666 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
| 667 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set | ||
| 668 | # CONFIG_TOUCHSCREEN_TSC2007 is not set | ||
| 669 | # CONFIG_TOUCHSCREEN_W90X900 is not set | ||
| 670 | # CONFIG_INPUT_MISC is not set | ||
| 671 | |||
| 672 | # | ||
| 673 | # Hardware I/O ports | ||
| 674 | # | ||
| 675 | CONFIG_SERIO=y | ||
| 676 | CONFIG_SERIO_SERPORT=y | ||
| 677 | CONFIG_SERIO_LIBPS2=y | ||
| 678 | # CONFIG_SERIO_RAW is not set | ||
| 679 | # CONFIG_GAMEPORT is not set | ||
| 680 | |||
| 681 | # | ||
| 682 | # Character devices | ||
| 683 | # | ||
| 684 | CONFIG_VT=y | ||
| 685 | CONFIG_CONSOLE_TRANSLATIONS=y | ||
| 686 | CONFIG_VT_CONSOLE=y | ||
| 687 | CONFIG_HW_CONSOLE=y | ||
| 688 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
| 689 | CONFIG_DEVKMEM=y | ||
| 690 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
| 691 | |||
| 692 | # | ||
| 693 | # Serial drivers | ||
| 694 | # | ||
| 695 | # CONFIG_SERIAL_8250 is not set | ||
| 696 | |||
| 697 | # | ||
| 698 | # Non-8250 serial port support | ||
| 699 | # | ||
| 700 | # CONFIG_SERIAL_MAX3100 is not set | ||
| 701 | CONFIG_SERIAL_PXA=y | ||
| 702 | CONFIG_SERIAL_PXA_CONSOLE=y | ||
| 703 | CONFIG_SERIAL_CORE=y | ||
| 704 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
| 705 | CONFIG_UNIX98_PTYS=y | ||
| 706 | # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set | ||
| 707 | # CONFIG_LEGACY_PTYS is not set | ||
| 708 | # CONFIG_IPMI_HANDLER is not set | ||
| 709 | # CONFIG_HW_RANDOM is not set | ||
| 710 | # CONFIG_R3964 is not set | ||
| 711 | # CONFIG_RAW_DRIVER is not set | ||
| 712 | # CONFIG_TCG_TPM is not set | ||
| 713 | CONFIG_I2C=y | ||
| 714 | CONFIG_I2C_BOARDINFO=y | ||
| 715 | # CONFIG_I2C_CHARDEV is not set | ||
| 716 | # CONFIG_I2C_HELPER_AUTO is not set | ||
| 717 | |||
| 718 | # | ||
| 719 | # I2C Algorithms | ||
| 720 | # | ||
| 721 | # CONFIG_I2C_ALGOBIT is not set | ||
| 722 | # CONFIG_I2C_ALGOPCF is not set | ||
| 723 | # CONFIG_I2C_ALGOPCA is not set | ||
| 724 | |||
| 725 | # | ||
| 726 | # I2C Hardware Bus support | ||
| 727 | # | ||
| 728 | |||
| 729 | # | ||
| 730 | # I2C system bus drivers (mostly embedded / system-on-chip) | ||
| 731 | # | ||
| 732 | # CONFIG_I2C_DESIGNWARE is not set | ||
| 733 | # CONFIG_I2C_GPIO is not set | ||
| 734 | # CONFIG_I2C_OCORES is not set | ||
| 735 | CONFIG_I2C_PXA=y | ||
| 736 | # CONFIG_I2C_PXA_SLAVE is not set | ||
| 737 | # CONFIG_I2C_SIMTEC is not set | ||
| 738 | |||
| 739 | # | ||
| 740 | # External I2C/SMBus adapter drivers | ||
| 741 | # | ||
| 742 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
| 743 | # CONFIG_I2C_TAOS_EVM is not set | ||
| 744 | |||
| 745 | # | ||
| 746 | # Other I2C/SMBus bus drivers | ||
| 747 | # | ||
| 748 | # CONFIG_I2C_PCA_PLATFORM is not set | ||
| 749 | # CONFIG_I2C_STUB is not set | ||
| 750 | |||
| 751 | # | ||
| 752 | # Miscellaneous I2C Chip support | ||
| 753 | # | ||
| 754 | # CONFIG_DS1682 is not set | ||
| 755 | # CONFIG_SENSORS_TSL2550 is not set | ||
| 756 | # CONFIG_I2C_DEBUG_CORE is not set | ||
| 757 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
| 758 | # CONFIG_I2C_DEBUG_BUS is not set | ||
| 759 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
| 760 | CONFIG_SPI=y | ||
| 761 | # CONFIG_SPI_DEBUG is not set | ||
| 762 | CONFIG_SPI_MASTER=y | ||
| 763 | |||
| 764 | # | ||
| 765 | # SPI Master Controller Drivers | ||
| 766 | # | ||
| 767 | # CONFIG_SPI_BITBANG is not set | ||
| 768 | # CONFIG_SPI_GPIO is not set | ||
| 769 | CONFIG_SPI_PXA2XX=y | ||
| 770 | |||
| 771 | # | ||
| 772 | # SPI Protocol Masters | ||
| 773 | # | ||
| 774 | # CONFIG_SPI_SPIDEV is not set | ||
| 775 | # CONFIG_SPI_TLE62X0 is not set | ||
| 776 | CONFIG_ARCH_REQUIRE_GPIOLIB=y | ||
| 777 | CONFIG_GPIOLIB=y | ||
| 778 | # CONFIG_DEBUG_GPIO is not set | ||
| 779 | # CONFIG_GPIO_SYSFS is not set | ||
| 780 | |||
| 781 | # | ||
| 782 | # Memory mapped GPIO expanders: | ||
| 783 | # | ||
| 784 | |||
| 785 | # | ||
| 786 | # I2C GPIO expanders: | ||
| 787 | # | ||
| 788 | CONFIG_GPIO_MAX732X=y | ||
| 789 | CONFIG_GPIO_PCA953X=y | ||
| 790 | CONFIG_GPIO_PCF857X=y | ||
| 791 | |||
| 792 | # | ||
| 793 | # PCI GPIO expanders: | ||
| 794 | # | ||
| 795 | |||
| 796 | # | ||
| 797 | # SPI GPIO expanders: | ||
| 798 | # | ||
| 799 | CONFIG_GPIO_MAX7301=y | ||
| 800 | # CONFIG_GPIO_MCP23S08 is not set | ||
| 801 | # CONFIG_W1 is not set | ||
| 802 | CONFIG_POWER_SUPPLY=y | ||
| 803 | CONFIG_POWER_SUPPLY_DEBUG=y | ||
| 804 | CONFIG_PDA_POWER=y | ||
| 805 | # CONFIG_BATTERY_DS2760 is not set | ||
| 806 | # CONFIG_BATTERY_BQ27x00 is not set | ||
| 807 | CONFIG_BATTERY_DA9030=y | ||
| 808 | # CONFIG_BATTERY_MAX17040 is not set | ||
| 809 | # CONFIG_HWMON is not set | ||
| 810 | # CONFIG_THERMAL is not set | ||
| 811 | # CONFIG_THERMAL_HWMON is not set | ||
| 812 | # CONFIG_WATCHDOG is not set | ||
| 813 | CONFIG_SSB_POSSIBLE=y | ||
| 814 | |||
| 815 | # | ||
| 816 | # Sonics Silicon Backplane | ||
| 817 | # | ||
| 818 | # CONFIG_SSB is not set | ||
| 819 | |||
| 820 | # | ||
| 821 | # Multifunction device drivers | ||
| 822 | # | ||
| 823 | # CONFIG_MFD_CORE is not set | ||
| 824 | # CONFIG_MFD_SM501 is not set | ||
| 825 | # CONFIG_MFD_ASIC3 is not set | ||
| 826 | # CONFIG_HTC_EGPIO is not set | ||
| 827 | # CONFIG_HTC_PASIC3 is not set | ||
| 828 | # CONFIG_TPS65010 is not set | ||
| 829 | # CONFIG_TWL4030_CORE is not set | ||
| 830 | # CONFIG_MFD_TMIO is not set | ||
| 831 | # CONFIG_MFD_T7L66XB is not set | ||
| 832 | # CONFIG_MFD_TC6387XB is not set | ||
| 833 | # CONFIG_MFD_TC6393XB is not set | ||
| 834 | CONFIG_PMIC_DA903X=y | ||
| 835 | # CONFIG_MFD_WM8400 is not set | ||
| 836 | # CONFIG_MFD_WM8350_I2C is not set | ||
| 837 | # CONFIG_MFD_PCF50633 is not set | ||
| 838 | # CONFIG_AB3100_CORE is not set | ||
| 839 | # CONFIG_EZX_PCAP is not set | ||
| 840 | # CONFIG_MEDIA_SUPPORT is not set | ||
| 841 | |||
| 842 | # | ||
| 843 | # Graphics support | ||
| 844 | # | ||
| 845 | # CONFIG_VGASTATE is not set | ||
| 846 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
| 847 | CONFIG_FB=y | ||
| 848 | # CONFIG_FIRMWARE_EDID is not set | ||
| 849 | # CONFIG_FB_DDC is not set | ||
| 850 | # CONFIG_FB_BOOT_VESA_SUPPORT is not set | ||
| 851 | CONFIG_FB_CFB_FILLRECT=y | ||
| 852 | CONFIG_FB_CFB_COPYAREA=y | ||
| 853 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
| 854 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
| 855 | # CONFIG_FB_SYS_FILLRECT is not set | ||
| 856 | # CONFIG_FB_SYS_COPYAREA is not set | ||
| 857 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
| 858 | # CONFIG_FB_FOREIGN_ENDIAN is not set | ||
| 859 | # CONFIG_FB_SYS_FOPS is not set | ||
| 860 | # CONFIG_FB_SVGALIB is not set | ||
| 861 | # CONFIG_FB_MACMODES is not set | ||
| 862 | # CONFIG_FB_BACKLIGHT is not set | ||
| 863 | # CONFIG_FB_MODE_HELPERS is not set | ||
| 864 | # CONFIG_FB_TILEBLITTING is not set | ||
| 865 | |||
| 866 | # | ||
| 867 | # Frame buffer hardware drivers | ||
| 868 | # | ||
| 869 | # CONFIG_FB_S1D13XXX is not set | ||
| 870 | CONFIG_FB_PXA=y | ||
| 871 | # CONFIG_FB_PXA_OVERLAY is not set | ||
| 872 | # CONFIG_FB_PXA_SMARTPANEL is not set | ||
| 873 | # CONFIG_FB_PXA_PARAMETERS is not set | ||
| 874 | # CONFIG_FB_MBX is not set | ||
| 875 | # CONFIG_FB_W100 is not set | ||
| 876 | # CONFIG_FB_VIRTUAL is not set | ||
| 877 | # CONFIG_FB_METRONOME is not set | ||
| 878 | # CONFIG_FB_MB862XX is not set | ||
| 879 | # CONFIG_FB_BROADSHEET is not set | ||
| 880 | CONFIG_BACKLIGHT_LCD_SUPPORT=y | ||
| 881 | CONFIG_LCD_CLASS_DEVICE=y | ||
| 882 | # CONFIG_LCD_LTV350QV is not set | ||
| 883 | # CONFIG_LCD_ILI9320 is not set | ||
| 884 | CONFIG_LCD_TDO24M=y | ||
| 885 | # CONFIG_LCD_VGG2432A4 is not set | ||
| 886 | # CONFIG_LCD_PLATFORM is not set | ||
| 887 | CONFIG_BACKLIGHT_CLASS_DEVICE=y | ||
| 888 | # CONFIG_BACKLIGHT_GENERIC is not set | ||
| 889 | CONFIG_BACKLIGHT_PWM=y | ||
| 890 | CONFIG_BACKLIGHT_DA903X=y | ||
| 891 | |||
| 892 | # | ||
| 893 | # Display device support | ||
| 894 | # | ||
| 895 | # CONFIG_DISPLAY_SUPPORT is not set | ||
| 896 | |||
| 897 | # | ||
| 898 | # Console display driver support | ||
| 899 | # | ||
| 900 | # CONFIG_VGA_CONSOLE is not set | ||
| 901 | CONFIG_DUMMY_CONSOLE=y | ||
| 902 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
| 903 | CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y | ||
| 904 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
| 905 | CONFIG_FONTS=y | ||
| 906 | # CONFIG_FONT_8x8 is not set | ||
| 907 | # CONFIG_FONT_8x16 is not set | ||
| 908 | CONFIG_FONT_6x11=y | ||
| 909 | # CONFIG_FONT_7x14 is not set | ||
| 910 | # CONFIG_FONT_PEARL_8x8 is not set | ||
| 911 | # CONFIG_FONT_ACORN_8x8 is not set | ||
| 912 | # CONFIG_FONT_MINI_4x6 is not set | ||
| 913 | # CONFIG_FONT_SUN8x16 is not set | ||
| 914 | # CONFIG_FONT_SUN12x22 is not set | ||
| 915 | # CONFIG_FONT_10x18 is not set | ||
| 916 | CONFIG_LOGO=y | ||
| 917 | CONFIG_LOGO_LINUX_MONO=y | ||
| 918 | CONFIG_LOGO_LINUX_VGA16=y | ||
| 919 | CONFIG_LOGO_LINUX_CLUT224=y | ||
| 920 | # CONFIG_SOUND is not set | ||
| 921 | # CONFIG_HID_SUPPORT is not set | ||
| 922 | # CONFIG_USB_SUPPORT is not set | ||
| 923 | CONFIG_MMC=y | ||
| 924 | # CONFIG_MMC_DEBUG is not set | ||
| 925 | # CONFIG_MMC_UNSAFE_RESUME is not set | ||
| 926 | |||
| 927 | # | ||
| 928 | # MMC/SD/SDIO Card Drivers | ||
| 929 | # | ||
| 930 | CONFIG_MMC_BLOCK=y | ||
| 931 | CONFIG_MMC_BLOCK_BOUNCE=y | ||
| 932 | # CONFIG_SDIO_UART is not set | ||
| 933 | # CONFIG_MMC_TEST is not set | ||
| 934 | |||
| 935 | # | ||
| 936 | # MMC/SD/SDIO Host Controller Drivers | ||
| 937 | # | ||
| 938 | CONFIG_MMC_PXA=y | ||
| 939 | # CONFIG_MMC_SDHCI is not set | ||
| 940 | # CONFIG_MMC_SPI is not set | ||
| 941 | # CONFIG_MEMSTICK is not set | ||
| 942 | # CONFIG_ACCESSIBILITY is not set | ||
| 943 | CONFIG_NEW_LEDS=y | ||
| 944 | CONFIG_LEDS_CLASS=m | ||
| 945 | |||
| 946 | # | ||
| 947 | # LED drivers | ||
| 948 | # | ||
| 949 | # CONFIG_LEDS_PCA9532 is not set | ||
| 950 | CONFIG_LEDS_GPIO=m | ||
| 951 | CONFIG_LEDS_GPIO_PLATFORM=y | ||
| 952 | # CONFIG_LEDS_LP5521 is not set | ||
| 953 | # CONFIG_LEDS_PCA955X is not set | ||
| 954 | CONFIG_LEDS_DA903X=m | ||
| 955 | # CONFIG_LEDS_DAC124S085 is not set | ||
| 956 | # CONFIG_LEDS_PWM is not set | ||
| 957 | # CONFIG_LEDS_BD2802 is not set | ||
| 958 | |||
| 959 | # | ||
| 960 | # LED Triggers | ||
| 961 | # | ||
| 962 | CONFIG_LEDS_TRIGGERS=y | ||
| 963 | CONFIG_LEDS_TRIGGER_TIMER=m | ||
| 964 | CONFIG_LEDS_TRIGGER_HEARTBEAT=m | ||
| 965 | CONFIG_LEDS_TRIGGER_BACKLIGHT=m | ||
| 966 | CONFIG_LEDS_TRIGGER_GPIO=m | ||
| 967 | CONFIG_LEDS_TRIGGER_DEFAULT_ON=m | ||
| 968 | |||
| 969 | # | ||
| 970 | # iptables trigger is under Netfilter config (LED target) | ||
| 971 | # | ||
| 972 | CONFIG_RTC_LIB=y | ||
| 973 | # CONFIG_RTC_CLASS is not set | ||
| 974 | # CONFIG_DMADEVICES is not set | ||
| 975 | # CONFIG_AUXDISPLAY is not set | ||
| 976 | CONFIG_REGULATOR=y | ||
| 977 | CONFIG_REGULATOR_DEBUG=y | ||
| 978 | # CONFIG_REGULATOR_FIXED_VOLTAGE is not set | ||
| 979 | CONFIG_REGULATOR_VIRTUAL_CONSUMER=y | ||
| 980 | # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set | ||
| 981 | # CONFIG_REGULATOR_BQ24022 is not set | ||
| 982 | # CONFIG_REGULATOR_MAX1586 is not set | ||
| 983 | CONFIG_REGULATOR_DA903X=y | ||
| 984 | # CONFIG_REGULATOR_LP3971 is not set | ||
| 985 | # CONFIG_UIO is not set | ||
| 986 | # CONFIG_STAGING is not set | ||
| 987 | |||
| 988 | # | ||
| 989 | # File systems | ||
| 990 | # | ||
| 991 | # CONFIG_EXT2_FS is not set | ||
| 992 | # CONFIG_EXT3_FS is not set | ||
| 993 | # CONFIG_EXT4_FS is not set | ||
| 994 | # CONFIG_REISERFS_FS is not set | ||
| 995 | # CONFIG_JFS_FS is not set | ||
| 996 | CONFIG_FS_POSIX_ACL=y | ||
| 997 | # CONFIG_XFS_FS is not set | ||
| 998 | # CONFIG_GFS2_FS is not set | ||
| 999 | # CONFIG_OCFS2_FS is not set | ||
| 1000 | # CONFIG_BTRFS_FS is not set | ||
| 1001 | CONFIG_FILE_LOCKING=y | ||
| 1002 | CONFIG_FSNOTIFY=y | ||
| 1003 | CONFIG_DNOTIFY=y | ||
| 1004 | # CONFIG_INOTIFY is not set | ||
| 1005 | CONFIG_INOTIFY_USER=y | ||
| 1006 | # CONFIG_QUOTA is not set | ||
| 1007 | # CONFIG_AUTOFS_FS is not set | ||
| 1008 | # CONFIG_AUTOFS4_FS is not set | ||
| 1009 | # CONFIG_FUSE_FS is not set | ||
| 1010 | |||
| 1011 | # | ||
| 1012 | # Caches | ||
| 1013 | # | ||
| 1014 | # CONFIG_FSCACHE is not set | ||
| 1015 | |||
| 1016 | # | ||
| 1017 | # CD-ROM/DVD Filesystems | ||
| 1018 | # | ||
| 1019 | # CONFIG_ISO9660_FS is not set | ||
| 1020 | # CONFIG_UDF_FS is not set | ||
| 1021 | |||
| 1022 | # | ||
| 1023 | # DOS/FAT/NT Filesystems | ||
| 1024 | # | ||
| 1025 | # CONFIG_MSDOS_FS is not set | ||
| 1026 | # CONFIG_VFAT_FS is not set | ||
| 1027 | # CONFIG_NTFS_FS is not set | ||
| 1028 | |||
| 1029 | # | ||
| 1030 | # Pseudo filesystems | ||
| 1031 | # | ||
| 1032 | CONFIG_PROC_FS=y | ||
| 1033 | CONFIG_PROC_SYSCTL=y | ||
| 1034 | CONFIG_PROC_PAGE_MONITOR=y | ||
| 1035 | CONFIG_SYSFS=y | ||
| 1036 | # CONFIG_TMPFS is not set | ||
| 1037 | # CONFIG_HUGETLB_PAGE is not set | ||
| 1038 | # CONFIG_CONFIGFS_FS is not set | ||
| 1039 | CONFIG_MISC_FILESYSTEMS=y | ||
| 1040 | # CONFIG_ADFS_FS is not set | ||
| 1041 | # CONFIG_AFFS_FS is not set | ||
| 1042 | # CONFIG_HFS_FS is not set | ||
| 1043 | # CONFIG_HFSPLUS_FS is not set | ||
| 1044 | # CONFIG_BEFS_FS is not set | ||
| 1045 | # CONFIG_BFS_FS is not set | ||
| 1046 | # CONFIG_EFS_FS is not set | ||
| 1047 | CONFIG_JFFS2_FS=y | ||
| 1048 | CONFIG_JFFS2_FS_DEBUG=0 | ||
| 1049 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
| 1050 | CONFIG_JFFS2_FS_WBUF_VERIFY=y | ||
| 1051 | # CONFIG_JFFS2_SUMMARY is not set | ||
| 1052 | # CONFIG_JFFS2_FS_XATTR is not set | ||
| 1053 | CONFIG_JFFS2_COMPRESSION_OPTIONS=y | ||
| 1054 | CONFIG_JFFS2_ZLIB=y | ||
| 1055 | CONFIG_JFFS2_LZO=y | ||
| 1056 | CONFIG_JFFS2_RTIME=y | ||
| 1057 | CONFIG_JFFS2_RUBIN=y | ||
| 1058 | # CONFIG_JFFS2_CMODE_NONE is not set | ||
| 1059 | CONFIG_JFFS2_CMODE_PRIORITY=y | ||
| 1060 | # CONFIG_JFFS2_CMODE_SIZE is not set | ||
| 1061 | # CONFIG_JFFS2_CMODE_FAVOURLZO is not set | ||
| 1062 | # CONFIG_CRAMFS is not set | ||
| 1063 | # CONFIG_SQUASHFS is not set | ||
| 1064 | # CONFIG_VXFS_FS is not set | ||
| 1065 | # CONFIG_MINIX_FS is not set | ||
| 1066 | # CONFIG_OMFS_FS is not set | ||
| 1067 | # CONFIG_HPFS_FS is not set | ||
| 1068 | # CONFIG_QNX4FS_FS is not set | ||
| 1069 | # CONFIG_ROMFS_FS is not set | ||
| 1070 | # CONFIG_SYSV_FS is not set | ||
| 1071 | # CONFIG_UFS_FS is not set | ||
| 1072 | # CONFIG_NILFS2_FS is not set | ||
| 1073 | CONFIG_NETWORK_FILESYSTEMS=y | ||
| 1074 | CONFIG_NFS_FS=y | ||
| 1075 | CONFIG_NFS_V3=y | ||
| 1076 | CONFIG_NFS_V3_ACL=y | ||
| 1077 | CONFIG_NFS_V4=y | ||
| 1078 | # CONFIG_NFS_V4_1 is not set | ||
| 1079 | CONFIG_ROOT_NFS=y | ||
| 1080 | # CONFIG_NFSD is not set | ||
| 1081 | CONFIG_LOCKD=y | ||
| 1082 | CONFIG_LOCKD_V4=y | ||
| 1083 | CONFIG_NFS_ACL_SUPPORT=y | ||
| 1084 | CONFIG_NFS_COMMON=y | ||
| 1085 | CONFIG_SUNRPC=y | ||
| 1086 | CONFIG_SUNRPC_GSS=y | ||
| 1087 | CONFIG_RPCSEC_GSS_KRB5=y | ||
| 1088 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
| 1089 | # CONFIG_SMB_FS is not set | ||
| 1090 | # CONFIG_CIFS is not set | ||
| 1091 | # CONFIG_NCP_FS is not set | ||
| 1092 | # CONFIG_CODA_FS is not set | ||
| 1093 | # CONFIG_AFS_FS is not set | ||
| 1094 | |||
| 1095 | # | ||
| 1096 | # Partition Types | ||
| 1097 | # | ||
| 1098 | # CONFIG_PARTITION_ADVANCED is not set | ||
| 1099 | CONFIG_MSDOS_PARTITION=y | ||
| 1100 | CONFIG_NLS=y | ||
| 1101 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
| 1102 | # CONFIG_NLS_CODEPAGE_437 is not set | ||
| 1103 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
| 1104 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
| 1105 | # CONFIG_NLS_CODEPAGE_850 is not set | ||
| 1106 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
| 1107 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
| 1108 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
| 1109 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
| 1110 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
| 1111 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
| 1112 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
| 1113 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
| 1114 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
| 1115 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
| 1116 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
| 1117 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
| 1118 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
| 1119 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
| 1120 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
| 1121 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
| 1122 | # CONFIG_NLS_ISO8859_8 is not set | ||
| 1123 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
| 1124 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
| 1125 | # CONFIG_NLS_ASCII is not set | ||
| 1126 | # CONFIG_NLS_ISO8859_1 is not set | ||
| 1127 | # CONFIG_NLS_ISO8859_2 is not set | ||
| 1128 | # CONFIG_NLS_ISO8859_3 is not set | ||
| 1129 | # CONFIG_NLS_ISO8859_4 is not set | ||
| 1130 | # CONFIG_NLS_ISO8859_5 is not set | ||
| 1131 | # CONFIG_NLS_ISO8859_6 is not set | ||
| 1132 | # CONFIG_NLS_ISO8859_7 is not set | ||
| 1133 | # CONFIG_NLS_ISO8859_9 is not set | ||
| 1134 | # CONFIG_NLS_ISO8859_13 is not set | ||
| 1135 | # CONFIG_NLS_ISO8859_14 is not set | ||
| 1136 | # CONFIG_NLS_ISO8859_15 is not set | ||
| 1137 | # CONFIG_NLS_KOI8_R is not set | ||
| 1138 | # CONFIG_NLS_KOI8_U is not set | ||
| 1139 | # CONFIG_NLS_UTF8 is not set | ||
| 1140 | # CONFIG_DLM is not set | ||
| 1141 | |||
| 1142 | # | ||
| 1143 | # Kernel hacking | ||
| 1144 | # | ||
| 1145 | CONFIG_PRINTK_TIME=y | ||
| 1146 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
| 1147 | CONFIG_ENABLE_MUST_CHECK=y | ||
| 1148 | CONFIG_FRAME_WARN=1024 | ||
| 1149 | CONFIG_MAGIC_SYSRQ=y | ||
| 1150 | # CONFIG_UNUSED_SYMBOLS is not set | ||
| 1151 | # CONFIG_DEBUG_FS is not set | ||
| 1152 | # CONFIG_HEADERS_CHECK is not set | ||
| 1153 | CONFIG_DEBUG_KERNEL=y | ||
| 1154 | CONFIG_DEBUG_SHIRQ=y | ||
| 1155 | CONFIG_DETECT_SOFTLOCKUP=y | ||
| 1156 | CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y | ||
| 1157 | CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 | ||
| 1158 | CONFIG_DETECT_HUNG_TASK=y | ||
| 1159 | # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set | ||
| 1160 | CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 | ||
| 1161 | # CONFIG_SCHED_DEBUG is not set | ||
| 1162 | # CONFIG_SCHEDSTATS is not set | ||
| 1163 | # CONFIG_TIMER_STATS is not set | ||
| 1164 | # CONFIG_DEBUG_OBJECTS is not set | ||
| 1165 | # CONFIG_DEBUG_SLAB is not set | ||
| 1166 | # CONFIG_DEBUG_KMEMLEAK is not set | ||
| 1167 | CONFIG_DEBUG_PREEMPT=y | ||
| 1168 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
| 1169 | # CONFIG_RT_MUTEX_TESTER is not set | ||
| 1170 | CONFIG_DEBUG_SPINLOCK=y | ||
| 1171 | # CONFIG_DEBUG_MUTEXES is not set | ||
| 1172 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
| 1173 | # CONFIG_PROVE_LOCKING is not set | ||
| 1174 | # CONFIG_LOCK_STAT is not set | ||
| 1175 | CONFIG_DEBUG_SPINLOCK_SLEEP=y | ||
| 1176 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
| 1177 | # CONFIG_DEBUG_KOBJECT is not set | ||
| 1178 | CONFIG_DEBUG_BUGVERBOSE=y | ||
| 1179 | # CONFIG_DEBUG_INFO is not set | ||
| 1180 | # CONFIG_DEBUG_VM is not set | ||
| 1181 | # CONFIG_DEBUG_WRITECOUNT is not set | ||
| 1182 | CONFIG_DEBUG_MEMORY_INIT=y | ||
| 1183 | # CONFIG_DEBUG_LIST is not set | ||
| 1184 | # CONFIG_DEBUG_SG is not set | ||
| 1185 | # CONFIG_DEBUG_NOTIFIERS is not set | ||
| 1186 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
| 1187 | # CONFIG_RCU_TORTURE_TEST is not set | ||
| 1188 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | ||
| 1189 | # CONFIG_BACKTRACE_SELF_TEST is not set | ||
| 1190 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set | ||
| 1191 | # CONFIG_FAULT_INJECTION is not set | ||
| 1192 | # CONFIG_LATENCYTOP is not set | ||
| 1193 | # CONFIG_SYSCTL_SYSCALL_CHECK is not set | ||
| 1194 | # CONFIG_PAGE_POISONING is not set | ||
| 1195 | CONFIG_HAVE_FUNCTION_TRACER=y | ||
| 1196 | CONFIG_TRACING_SUPPORT=y | ||
| 1197 | # CONFIG_FTRACE is not set | ||
| 1198 | # CONFIG_SAMPLES is not set | ||
| 1199 | CONFIG_HAVE_ARCH_KGDB=y | ||
| 1200 | # CONFIG_KGDB is not set | ||
| 1201 | # CONFIG_KMEMCHECK is not set | ||
| 1202 | CONFIG_ARM_UNWIND=y | ||
| 1203 | CONFIG_DEBUG_USER=y | ||
| 1204 | # CONFIG_DEBUG_ERRORS is not set | ||
| 1205 | # CONFIG_DEBUG_STACK_USAGE is not set | ||
| 1206 | # CONFIG_DEBUG_LL is not set | ||
| 1207 | |||
| 1208 | # | ||
| 1209 | # Security options | ||
| 1210 | # | ||
| 1211 | # CONFIG_KEYS is not set | ||
| 1212 | # CONFIG_SECURITY is not set | ||
| 1213 | # CONFIG_SECURITYFS is not set | ||
| 1214 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
| 1215 | CONFIG_CRYPTO=y | ||
| 1216 | |||
| 1217 | # | ||
| 1218 | # Crypto core or helper | ||
| 1219 | # | ||
| 1220 | # CONFIG_CRYPTO_FIPS is not set | ||
| 1221 | CONFIG_CRYPTO_ALGAPI=y | ||
| 1222 | CONFIG_CRYPTO_ALGAPI2=y | ||
| 1223 | CONFIG_CRYPTO_AEAD2=y | ||
| 1224 | CONFIG_CRYPTO_BLKCIPHER=y | ||
| 1225 | CONFIG_CRYPTO_BLKCIPHER2=y | ||
| 1226 | CONFIG_CRYPTO_HASH=y | ||
| 1227 | CONFIG_CRYPTO_HASH2=y | ||
| 1228 | CONFIG_CRYPTO_RNG2=y | ||
| 1229 | CONFIG_CRYPTO_PCOMP=y | ||
| 1230 | CONFIG_CRYPTO_MANAGER=y | ||
| 1231 | CONFIG_CRYPTO_MANAGER2=y | ||
| 1232 | # CONFIG_CRYPTO_GF128MUL is not set | ||
| 1233 | # CONFIG_CRYPTO_NULL is not set | ||
| 1234 | CONFIG_CRYPTO_WORKQUEUE=y | ||
| 1235 | # CONFIG_CRYPTO_CRYPTD is not set | ||
| 1236 | # CONFIG_CRYPTO_AUTHENC is not set | ||
| 1237 | # CONFIG_CRYPTO_TEST is not set | ||
| 1238 | |||
| 1239 | # | ||
| 1240 | # Authenticated Encryption with Associated Data | ||
| 1241 | # | ||
| 1242 | # CONFIG_CRYPTO_CCM is not set | ||
| 1243 | # CONFIG_CRYPTO_GCM is not set | ||
| 1244 | # CONFIG_CRYPTO_SEQIV is not set | ||
| 1245 | |||
| 1246 | # | ||
| 1247 | # Block modes | ||
| 1248 | # | ||
| 1249 | CONFIG_CRYPTO_CBC=y | ||
| 1250 | # CONFIG_CRYPTO_CTR is not set | ||
| 1251 | # CONFIG_CRYPTO_CTS is not set | ||
| 1252 | # CONFIG_CRYPTO_ECB is not set | ||
| 1253 | # CONFIG_CRYPTO_LRW is not set | ||
| 1254 | # CONFIG_CRYPTO_PCBC is not set | ||
| 1255 | # CONFIG_CRYPTO_XTS is not set | ||
| 1256 | |||
| 1257 | # | ||
| 1258 | # Hash modes | ||
| 1259 | # | ||
| 1260 | # CONFIG_CRYPTO_HMAC is not set | ||
| 1261 | # CONFIG_CRYPTO_XCBC is not set | ||
| 1262 | |||
| 1263 | # | ||
| 1264 | # Digest | ||
| 1265 | # | ||
| 1266 | # CONFIG_CRYPTO_CRC32C is not set | ||
| 1267 | # CONFIG_CRYPTO_MD4 is not set | ||
| 1268 | CONFIG_CRYPTO_MD5=y | ||
| 1269 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
| 1270 | # CONFIG_CRYPTO_RMD128 is not set | ||
| 1271 | # CONFIG_CRYPTO_RMD160 is not set | ||
| 1272 | # CONFIG_CRYPTO_RMD256 is not set | ||
| 1273 | # CONFIG_CRYPTO_RMD320 is not set | ||
| 1274 | # CONFIG_CRYPTO_SHA1 is not set | ||
| 1275 | # CONFIG_CRYPTO_SHA256 is not set | ||
| 1276 | # CONFIG_CRYPTO_SHA512 is not set | ||
| 1277 | # CONFIG_CRYPTO_TGR192 is not set | ||
| 1278 | # CONFIG_CRYPTO_WP512 is not set | ||
| 1279 | |||
| 1280 | # | ||
| 1281 | # Ciphers | ||
| 1282 | # | ||
| 1283 | # CONFIG_CRYPTO_AES is not set | ||
| 1284 | # CONFIG_CRYPTO_ANUBIS is not set | ||
| 1285 | # CONFIG_CRYPTO_ARC4 is not set | ||
| 1286 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
| 1287 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
| 1288 | # CONFIG_CRYPTO_CAST5 is not set | ||
| 1289 | # CONFIG_CRYPTO_CAST6 is not set | ||
| 1290 | CONFIG_CRYPTO_DES=y | ||
| 1291 | # CONFIG_CRYPTO_FCRYPT is not set | ||
| 1292 | # CONFIG_CRYPTO_KHAZAD is not set | ||
| 1293 | # CONFIG_CRYPTO_SALSA20 is not set | ||
| 1294 | # CONFIG_CRYPTO_SEED is not set | ||
| 1295 | # CONFIG_CRYPTO_SERPENT is not set | ||
| 1296 | # CONFIG_CRYPTO_TEA is not set | ||
| 1297 | # CONFIG_CRYPTO_TWOFISH is not set | ||
| 1298 | |||
| 1299 | # | ||
| 1300 | # Compression | ||
| 1301 | # | ||
| 1302 | # CONFIG_CRYPTO_DEFLATE is not set | ||
| 1303 | # CONFIG_CRYPTO_ZLIB is not set | ||
| 1304 | # CONFIG_CRYPTO_LZO is not set | ||
| 1305 | |||
| 1306 | # | ||
| 1307 | # Random Number Generation | ||
| 1308 | # | ||
| 1309 | # CONFIG_CRYPTO_ANSI_CPRNG is not set | ||
| 1310 | # CONFIG_CRYPTO_HW is not set | ||
| 1311 | # CONFIG_BINARY_PRINTF is not set | ||
| 1312 | |||
| 1313 | # | ||
| 1314 | # Library routines | ||
| 1315 | # | ||
| 1316 | CONFIG_BITREVERSE=y | ||
| 1317 | CONFIG_GENERIC_FIND_LAST_BIT=y | ||
| 1318 | # CONFIG_CRC_CCITT is not set | ||
| 1319 | # CONFIG_CRC16 is not set | ||
| 1320 | # CONFIG_CRC_T10DIF is not set | ||
| 1321 | # CONFIG_CRC_ITU_T is not set | ||
| 1322 | CONFIG_CRC32=y | ||
| 1323 | # CONFIG_CRC7 is not set | ||
| 1324 | # CONFIG_LIBCRC32C is not set | ||
| 1325 | CONFIG_ZLIB_INFLATE=y | ||
| 1326 | CONFIG_ZLIB_DEFLATE=y | ||
| 1327 | CONFIG_LZO_COMPRESS=y | ||
| 1328 | CONFIG_LZO_DECOMPRESS=y | ||
| 1329 | CONFIG_HAS_IOMEM=y | ||
| 1330 | CONFIG_HAS_IOPORT=y | ||
| 1331 | CONFIG_HAS_DMA=y | ||
| 1332 | CONFIG_NLATTR=y | ||
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig new file mode 100644 index 000000000000..33bb7250946b --- /dev/null +++ b/arch/arm/configs/xcep_defconfig | |||
| @@ -0,0 +1,1129 @@ | |||
| 1 | # | ||
| 2 | # Automatically generated make config: don't edit | ||
| 3 | # Linux kernel version: 2.6.31-rc6 | ||
| 4 | # Thu Aug 20 09:02:37 2009 | ||
| 5 | # | ||
| 6 | CONFIG_ARM=y | ||
| 7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
| 8 | CONFIG_GENERIC_GPIO=y | ||
| 9 | CONFIG_GENERIC_TIME=y | ||
| 10 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
| 11 | CONFIG_MMU=y | ||
| 12 | CONFIG_GENERIC_HARDIRQS=y | ||
| 13 | CONFIG_STACKTRACE_SUPPORT=y | ||
| 14 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y | ||
| 15 | CONFIG_LOCKDEP_SUPPORT=y | ||
| 16 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
| 17 | CONFIG_HARDIRQS_SW_RESEND=y | ||
| 18 | CONFIG_GENERIC_IRQ_PROBE=y | ||
| 19 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
| 20 | CONFIG_GENERIC_HWEIGHT=y | ||
| 21 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
| 22 | CONFIG_ARCH_MTD_XIP=y | ||
| 23 | CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y | ||
| 24 | CONFIG_VECTORS_BASE=0xffff0000 | ||
| 25 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
| 26 | CONFIG_CONSTRUCTORS=y | ||
| 27 | |||
| 28 | # | ||
| 29 | # General setup | ||
| 30 | # | ||
| 31 | CONFIG_EXPERIMENTAL=y | ||
| 32 | CONFIG_BROKEN_ON_SMP=y | ||
| 33 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
| 34 | CONFIG_LOCALVERSION=".xcep-itech" | ||
| 35 | # CONFIG_LOCALVERSION_AUTO is not set | ||
| 36 | CONFIG_SYSVIPC=y | ||
| 37 | CONFIG_SYSVIPC_SYSCTL=y | ||
| 38 | # CONFIG_POSIX_MQUEUE is not set | ||
| 39 | CONFIG_BSD_PROCESS_ACCT=y | ||
| 40 | # CONFIG_BSD_PROCESS_ACCT_V3 is not set | ||
| 41 | # CONFIG_TASKSTATS is not set | ||
| 42 | # CONFIG_AUDIT is not set | ||
| 43 | |||
| 44 | # | ||
| 45 | # RCU Subsystem | ||
| 46 | # | ||
| 47 | CONFIG_CLASSIC_RCU=y | ||
| 48 | # CONFIG_TREE_RCU is not set | ||
| 49 | # CONFIG_PREEMPT_RCU is not set | ||
| 50 | # CONFIG_TREE_RCU_TRACE is not set | ||
| 51 | # CONFIG_PREEMPT_RCU_TRACE is not set | ||
| 52 | CONFIG_IKCONFIG=y | ||
| 53 | CONFIG_IKCONFIG_PROC=y | ||
| 54 | CONFIG_LOG_BUF_SHIFT=16 | ||
| 55 | # CONFIG_GROUP_SCHED is not set | ||
| 56 | # CONFIG_CGROUPS is not set | ||
| 57 | CONFIG_SYSFS_DEPRECATED=y | ||
| 58 | CONFIG_SYSFS_DEPRECATED_V2=y | ||
| 59 | # CONFIG_RELAY is not set | ||
| 60 | # CONFIG_NAMESPACES is not set | ||
| 61 | CONFIG_BLK_DEV_INITRD=y | ||
| 62 | CONFIG_INITRAMFS_SOURCE="" | ||
| 63 | CONFIG_RD_GZIP=y | ||
| 64 | # CONFIG_RD_BZIP2 is not set | ||
| 65 | # CONFIG_RD_LZMA is not set | ||
| 66 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
| 67 | CONFIG_SYSCTL=y | ||
| 68 | CONFIG_ANON_INODES=y | ||
| 69 | CONFIG_EMBEDDED=y | ||
| 70 | # CONFIG_UID16 is not set | ||
| 71 | CONFIG_SYSCTL_SYSCALL=y | ||
| 72 | CONFIG_KALLSYMS=y | ||
| 73 | # CONFIG_KALLSYMS_ALL is not set | ||
| 74 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
| 75 | CONFIG_HOTPLUG=y | ||
| 76 | CONFIG_PRINTK=y | ||
| 77 | CONFIG_BUG=y | ||
| 78 | CONFIG_ELF_CORE=y | ||
| 79 | CONFIG_BASE_FULL=y | ||
| 80 | CONFIG_FUTEX=y | ||
| 81 | CONFIG_EPOLL=y | ||
| 82 | CONFIG_SIGNALFD=y | ||
| 83 | CONFIG_TIMERFD=y | ||
| 84 | CONFIG_EVENTFD=y | ||
| 85 | # CONFIG_SHMEM is not set | ||
| 86 | CONFIG_AIO=y | ||
| 87 | |||
| 88 | # | ||
| 89 | # Performance Counters | ||
| 90 | # | ||
| 91 | # CONFIG_VM_EVENT_COUNTERS is not set | ||
| 92 | CONFIG_STRIP_ASM_SYMS=y | ||
| 93 | # CONFIG_COMPAT_BRK is not set | ||
| 94 | # CONFIG_SLAB is not set | ||
| 95 | # CONFIG_SLUB is not set | ||
| 96 | CONFIG_SLOB=y | ||
| 97 | # CONFIG_PROFILING is not set | ||
| 98 | CONFIG_TRACEPOINTS=y | ||
| 99 | CONFIG_MARKERS=y | ||
| 100 | CONFIG_HAVE_OPROFILE=y | ||
| 101 | CONFIG_KPROBES=y | ||
| 102 | CONFIG_KRETPROBES=y | ||
| 103 | CONFIG_HAVE_KPROBES=y | ||
| 104 | CONFIG_HAVE_KRETPROBES=y | ||
| 105 | CONFIG_HAVE_CLK=y | ||
| 106 | |||
| 107 | # | ||
| 108 | # GCOV-based kernel profiling | ||
| 109 | # | ||
| 110 | # CONFIG_SLOW_WORK is not set | ||
| 111 | CONFIG_HAVE_GENERIC_DMA_COHERENT=y | ||
| 112 | CONFIG_RT_MUTEXES=y | ||
| 113 | CONFIG_BASE_SMALL=0 | ||
| 114 | CONFIG_MODULES=y | ||
| 115 | # CONFIG_MODULE_FORCE_LOAD is not set | ||
| 116 | CONFIG_MODULE_UNLOAD=y | ||
| 117 | # CONFIG_MODULE_FORCE_UNLOAD is not set | ||
| 118 | CONFIG_MODVERSIONS=y | ||
| 119 | CONFIG_MODULE_SRCVERSION_ALL=y | ||
| 120 | # CONFIG_BLOCK is not set | ||
| 121 | # CONFIG_FREEZER is not set | ||
| 122 | |||
| 123 | # | ||
| 124 | # System Type | ||
| 125 | # | ||
| 126 | # CONFIG_ARCH_AAEC2000 is not set | ||
| 127 | # CONFIG_ARCH_INTEGRATOR is not set | ||
| 128 | # CONFIG_ARCH_REALVIEW is not set | ||
| 129 | # CONFIG_ARCH_VERSATILE is not set | ||
| 130 | # CONFIG_ARCH_AT91 is not set | ||
| 131 | # CONFIG_ARCH_CLPS711X is not set | ||
| 132 | # CONFIG_ARCH_GEMINI is not set | ||
| 133 | # CONFIG_ARCH_EBSA110 is not set | ||
| 134 | # CONFIG_ARCH_EP93XX is not set | ||
| 135 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
| 136 | # CONFIG_ARCH_MXC is not set | ||
| 137 | # CONFIG_ARCH_STMP3XXX is not set | ||
| 138 | # CONFIG_ARCH_NETX is not set | ||
| 139 | # CONFIG_ARCH_H720X is not set | ||
| 140 | # CONFIG_ARCH_IOP13XX is not set | ||
| 141 | # CONFIG_ARCH_IOP32X is not set | ||
| 142 | # CONFIG_ARCH_IOP33X is not set | ||
| 143 | # CONFIG_ARCH_IXP23XX is not set | ||
| 144 | # CONFIG_ARCH_IXP2000 is not set | ||
| 145 | # CONFIG_ARCH_IXP4XX is not set | ||
| 146 | # CONFIG_ARCH_L7200 is not set | ||
| 147 | # CONFIG_ARCH_KIRKWOOD is not set | ||
| 148 | # CONFIG_ARCH_LOKI is not set | ||
| 149 | # CONFIG_ARCH_MV78XX0 is not set | ||
| 150 | # CONFIG_ARCH_ORION5X is not set | ||
| 151 | # CONFIG_ARCH_MMP is not set | ||
| 152 | # CONFIG_ARCH_KS8695 is not set | ||
| 153 | # CONFIG_ARCH_NS9XXX is not set | ||
| 154 | # CONFIG_ARCH_W90X900 is not set | ||
| 155 | # CONFIG_ARCH_PNX4008 is not set | ||
| 156 | CONFIG_ARCH_PXA=y | ||
| 157 | # CONFIG_ARCH_MSM is not set | ||
| 158 | # CONFIG_ARCH_RPC is not set | ||
| 159 | # CONFIG_ARCH_SA1100 is not set | ||
| 160 | # CONFIG_ARCH_S3C2410 is not set | ||
| 161 | # CONFIG_ARCH_S3C64XX is not set | ||
| 162 | # CONFIG_ARCH_SHARK is not set | ||
| 163 | # CONFIG_ARCH_LH7A40X is not set | ||
| 164 | # CONFIG_ARCH_U300 is not set | ||
| 165 | # CONFIG_ARCH_DAVINCI is not set | ||
| 166 | # CONFIG_ARCH_OMAP is not set | ||
| 167 | |||
| 168 | # | ||
| 169 | # Intel PXA2xx/PXA3xx Implementations | ||
| 170 | # | ||
| 171 | # CONFIG_ARCH_GUMSTIX is not set | ||
| 172 | # CONFIG_MACH_INTELMOTE2 is not set | ||
| 173 | # CONFIG_MACH_STARGATE2 is not set | ||
| 174 | # CONFIG_ARCH_LUBBOCK is not set | ||
| 175 | # CONFIG_MACH_LOGICPD_PXA270 is not set | ||
| 176 | # CONFIG_MACH_MAINSTONE is not set | ||
| 177 | # CONFIG_MACH_MP900C is not set | ||
| 178 | # CONFIG_ARCH_PXA_IDP is not set | ||
| 179 | # CONFIG_PXA_SHARPSL is not set | ||
| 180 | # CONFIG_ARCH_VIPER is not set | ||
| 181 | # CONFIG_ARCH_PXA_ESERIES is not set | ||
| 182 | # CONFIG_TRIZEPS_PXA is not set | ||
| 183 | # CONFIG_MACH_H5000 is not set | ||
| 184 | # CONFIG_MACH_EM_X270 is not set | ||
| 185 | # CONFIG_MACH_EXEDA is not set | ||
| 186 | # CONFIG_MACH_COLIBRI is not set | ||
| 187 | # CONFIG_MACH_COLIBRI300 is not set | ||
| 188 | # CONFIG_MACH_COLIBRI320 is not set | ||
| 189 | # CONFIG_MACH_ZYLONITE is not set | ||
| 190 | # CONFIG_MACH_LITTLETON is not set | ||
| 191 | # CONFIG_MACH_TAVOREVB is not set | ||
| 192 | # CONFIG_MACH_SAAR is not set | ||
| 193 | # CONFIG_MACH_ARMCORE is not set | ||
| 194 | # CONFIG_MACH_CM_X300 is not set | ||
| 195 | # CONFIG_MACH_H4700 is not set | ||
| 196 | # CONFIG_MACH_MAGICIAN is not set | ||
| 197 | # CONFIG_MACH_HIMALAYA is not set | ||
| 198 | # CONFIG_MACH_MIOA701 is not set | ||
| 199 | # CONFIG_MACH_PCM027 is not set | ||
| 200 | # CONFIG_ARCH_PXA_PALM is not set | ||
| 201 | # CONFIG_MACH_CSB726 is not set | ||
| 202 | # CONFIG_PXA_EZX is not set | ||
| 203 | CONFIG_MACH_XCEP=y | ||
| 204 | CONFIG_PXA25x=y | ||
| 205 | CONFIG_PXA_SSP=y | ||
| 206 | CONFIG_PLAT_PXA=y | ||
| 207 | |||
| 208 | # | ||
| 209 | # Processor Type | ||
| 210 | # | ||
| 211 | CONFIG_CPU_32=y | ||
| 212 | CONFIG_CPU_XSCALE=y | ||
| 213 | CONFIG_CPU_32v5=y | ||
| 214 | CONFIG_CPU_ABRT_EV5T=y | ||
| 215 | CONFIG_CPU_PABRT_NOIFAR=y | ||
| 216 | CONFIG_CPU_CACHE_VIVT=y | ||
| 217 | CONFIG_CPU_TLB_V4WBI=y | ||
| 218 | CONFIG_CPU_CP15=y | ||
| 219 | CONFIG_CPU_CP15_MMU=y | ||
| 220 | |||
| 221 | # | ||
| 222 | # Processor Features | ||
| 223 | # | ||
| 224 | CONFIG_ARM_THUMB=y | ||
| 225 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
| 226 | CONFIG_IWMMXT=y | ||
| 227 | CONFIG_XSCALE_PMU=y | ||
| 228 | CONFIG_COMMON_CLKDEV=y | ||
| 229 | |||
| 230 | # | ||
| 231 | # Bus support | ||
| 232 | # | ||
| 233 | # CONFIG_PCI_SYSCALL is not set | ||
| 234 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
| 235 | # CONFIG_PCCARD is not set | ||
| 236 | |||
| 237 | # | ||
| 238 | # Kernel Features | ||
| 239 | # | ||
| 240 | CONFIG_TICK_ONESHOT=y | ||
| 241 | CONFIG_NO_HZ=y | ||
| 242 | CONFIG_HIGH_RES_TIMERS=y | ||
| 243 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
| 244 | CONFIG_VMSPLIT_3G=y | ||
| 245 | # CONFIG_VMSPLIT_2G is not set | ||
| 246 | # CONFIG_VMSPLIT_1G is not set | ||
| 247 | CONFIG_PAGE_OFFSET=0xC0000000 | ||
| 248 | # CONFIG_PREEMPT is not set | ||
| 249 | CONFIG_HZ=100 | ||
| 250 | CONFIG_AEABI=y | ||
| 251 | CONFIG_OABI_COMPAT=y | ||
| 252 | # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set | ||
| 253 | # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set | ||
| 254 | # CONFIG_HIGHMEM is not set | ||
| 255 | CONFIG_SELECT_MEMORY_MODEL=y | ||
| 256 | CONFIG_FLATMEM_MANUAL=y | ||
| 257 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
| 258 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
| 259 | CONFIG_FLATMEM=y | ||
| 260 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
| 261 | CONFIG_PAGEFLAGS_EXTENDED=y | ||
| 262 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
| 263 | # CONFIG_PHYS_ADDR_T_64BIT is not set | ||
| 264 | CONFIG_ZONE_DMA_FLAG=0 | ||
| 265 | CONFIG_VIRT_TO_BUS=y | ||
| 266 | CONFIG_HAVE_MLOCK=y | ||
| 267 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y | ||
| 268 | CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 | ||
| 269 | CONFIG_ALIGNMENT_TRAP=y | ||
| 270 | # CONFIG_UACCESS_WITH_MEMCPY is not set | ||
| 271 | |||
| 272 | # | ||
| 273 | # Boot options | ||
| 274 | # | ||
| 275 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
| 276 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
| 277 | CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200" | ||
| 278 | # CONFIG_XIP_KERNEL is not set | ||
| 279 | # CONFIG_KEXEC is not set | ||
| 280 | |||
| 281 | # | ||
| 282 | # CPU Power Management | ||
| 283 | # | ||
| 284 | # CONFIG_CPU_FREQ is not set | ||
| 285 | # CONFIG_CPU_IDLE is not set | ||
| 286 | |||
| 287 | # | ||
| 288 | # Floating point emulation | ||
| 289 | # | ||
| 290 | |||
| 291 | # | ||
| 292 | # At least one emulation must be selected | ||
| 293 | # | ||
| 294 | CONFIG_FPE_NWFPE=y | ||
| 295 | # CONFIG_FPE_NWFPE_XP is not set | ||
| 296 | # CONFIG_FPE_FASTFPE is not set | ||
| 297 | |||
| 298 | # | ||
| 299 | # Userspace binary formats | ||
| 300 | # | ||
| 301 | CONFIG_BINFMT_ELF=y | ||
| 302 | # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set | ||
| 303 | CONFIG_HAVE_AOUT=y | ||
| 304 | # CONFIG_BINFMT_AOUT is not set | ||
| 305 | # CONFIG_BINFMT_MISC is not set | ||
| 306 | |||
| 307 | # | ||
| 308 | # Power management options | ||
| 309 | # | ||
| 310 | # CONFIG_PM is not set | ||
| 311 | CONFIG_ARCH_SUSPEND_POSSIBLE=y | ||
| 312 | CONFIG_NET=y | ||
| 313 | |||
| 314 | # | ||
| 315 | # Networking options | ||
| 316 | # | ||
| 317 | CONFIG_PACKET=m | ||
| 318 | CONFIG_PACKET_MMAP=y | ||
| 319 | CONFIG_UNIX=y | ||
| 320 | CONFIG_XFRM=y | ||
| 321 | # CONFIG_XFRM_USER is not set | ||
| 322 | # CONFIG_XFRM_SUB_POLICY is not set | ||
| 323 | # CONFIG_XFRM_MIGRATE is not set | ||
| 324 | # CONFIG_XFRM_STATISTICS is not set | ||
| 325 | CONFIG_NET_KEY=y | ||
| 326 | # CONFIG_NET_KEY_MIGRATE is not set | ||
| 327 | CONFIG_INET=y | ||
| 328 | CONFIG_IP_MULTICAST=y | ||
| 329 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
| 330 | CONFIG_IP_FIB_HASH=y | ||
| 331 | CONFIG_IP_PNP=y | ||
| 332 | CONFIG_IP_PNP_DHCP=y | ||
| 333 | CONFIG_IP_PNP_BOOTP=y | ||
| 334 | # CONFIG_IP_PNP_RARP is not set | ||
| 335 | # CONFIG_NET_IPIP is not set | ||
| 336 | # CONFIG_NET_IPGRE is not set | ||
| 337 | # CONFIG_IP_MROUTE is not set | ||
| 338 | # CONFIG_ARPD is not set | ||
| 339 | # CONFIG_SYN_COOKIES is not set | ||
| 340 | # CONFIG_INET_AH is not set | ||
| 341 | # CONFIG_INET_ESP is not set | ||
| 342 | # CONFIG_INET_IPCOMP is not set | ||
| 343 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
| 344 | # CONFIG_INET_TUNNEL is not set | ||
| 345 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
| 346 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
| 347 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
| 348 | CONFIG_INET_LRO=y | ||
| 349 | # CONFIG_INET_DIAG is not set | ||
| 350 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
| 351 | CONFIG_TCP_CONG_CUBIC=y | ||
| 352 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
| 353 | # CONFIG_TCP_MD5SIG is not set | ||
| 354 | # CONFIG_IPV6 is not set | ||
| 355 | # CONFIG_NETWORK_SECMARK is not set | ||
| 356 | # CONFIG_NETFILTER is not set | ||
| 357 | # CONFIG_IP_DCCP is not set | ||
| 358 | # CONFIG_IP_SCTP is not set | ||
| 359 | # CONFIG_TIPC is not set | ||
| 360 | # CONFIG_ATM is not set | ||
| 361 | # CONFIG_BRIDGE is not set | ||
| 362 | # CONFIG_NET_DSA is not set | ||
| 363 | # CONFIG_VLAN_8021Q is not set | ||
| 364 | # CONFIG_DECNET is not set | ||
| 365 | # CONFIG_LLC2 is not set | ||
| 366 | # CONFIG_IPX is not set | ||
| 367 | # CONFIG_ATALK is not set | ||
| 368 | # CONFIG_X25 is not set | ||
| 369 | # CONFIG_LAPB is not set | ||
| 370 | # CONFIG_ECONET is not set | ||
| 371 | # CONFIG_WAN_ROUTER is not set | ||
| 372 | # CONFIG_PHONET is not set | ||
| 373 | # CONFIG_IEEE802154 is not set | ||
| 374 | # CONFIG_NET_SCHED is not set | ||
| 375 | # CONFIG_DCB is not set | ||
| 376 | |||
| 377 | # | ||
| 378 | # Network testing | ||
| 379 | # | ||
| 380 | # CONFIG_NET_PKTGEN is not set | ||
| 381 | # CONFIG_NET_TCPPROBE is not set | ||
| 382 | # CONFIG_NET_DROP_MONITOR is not set | ||
| 383 | # CONFIG_HAMRADIO is not set | ||
| 384 | # CONFIG_CAN is not set | ||
| 385 | # CONFIG_IRDA is not set | ||
| 386 | # CONFIG_BT is not set | ||
| 387 | # CONFIG_AF_RXRPC is not set | ||
| 388 | # CONFIG_WIRELESS is not set | ||
| 389 | # CONFIG_WIMAX is not set | ||
| 390 | # CONFIG_RFKILL is not set | ||
| 391 | # CONFIG_NET_9P is not set | ||
| 392 | |||
| 393 | # | ||
| 394 | # Device Drivers | ||
| 395 | # | ||
| 396 | |||
| 397 | # | ||
| 398 | # Generic Driver Options | ||
| 399 | # | ||
| 400 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
| 401 | CONFIG_STANDALONE=y | ||
| 402 | # CONFIG_PREVENT_FIRMWARE_BUILD is not set | ||
| 403 | # CONFIG_FW_LOADER is not set | ||
| 404 | # CONFIG_DEBUG_DRIVER is not set | ||
| 405 | # CONFIG_DEBUG_DEVRES is not set | ||
| 406 | # CONFIG_SYS_HYPERVISOR is not set | ||
| 407 | # CONFIG_CONNECTOR is not set | ||
| 408 | CONFIG_MTD=y | ||
| 409 | # CONFIG_MTD_DEBUG is not set | ||
| 410 | CONFIG_MTD_CONCAT=y | ||
| 411 | CONFIG_MTD_PARTITIONS=y | ||
| 412 | # CONFIG_MTD_TESTS is not set | ||
| 413 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
| 414 | # CONFIG_MTD_CMDLINE_PARTS is not set | ||
| 415 | # CONFIG_MTD_AFS_PARTS is not set | ||
| 416 | # CONFIG_MTD_AR7_PARTS is not set | ||
| 417 | |||
| 418 | # | ||
| 419 | # User Modules And Translation Layers | ||
| 420 | # | ||
| 421 | CONFIG_MTD_CHAR=y | ||
| 422 | # CONFIG_MTD_OOPS is not set | ||
| 423 | |||
| 424 | # | ||
| 425 | # RAM/ROM/Flash chip drivers | ||
| 426 | # | ||
| 427 | CONFIG_MTD_CFI=y | ||
| 428 | # CONFIG_MTD_JEDECPROBE is not set | ||
| 429 | CONFIG_MTD_GEN_PROBE=y | ||
| 430 | # CONFIG_MTD_CFI_ADV_OPTIONS is not set | ||
| 431 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
| 432 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
| 433 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
| 434 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
| 435 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
| 436 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
| 437 | CONFIG_MTD_CFI_I1=y | ||
| 438 | CONFIG_MTD_CFI_I2=y | ||
| 439 | # CONFIG_MTD_CFI_I4 is not set | ||
| 440 | # CONFIG_MTD_CFI_I8 is not set | ||
| 441 | CONFIG_MTD_CFI_INTELEXT=y | ||
| 442 | # CONFIG_MTD_CFI_AMDSTD is not set | ||
| 443 | # CONFIG_MTD_CFI_STAA is not set | ||
| 444 | CONFIG_MTD_CFI_UTIL=y | ||
| 445 | # CONFIG_MTD_RAM is not set | ||
| 446 | # CONFIG_MTD_ROM is not set | ||
| 447 | # CONFIG_MTD_ABSENT is not set | ||
| 448 | # CONFIG_MTD_XIP is not set | ||
| 449 | |||
| 450 | # | ||
| 451 | # Mapping drivers for chip access | ||
| 452 | # | ||
| 453 | CONFIG_MTD_COMPLEX_MAPPINGS=y | ||
| 454 | CONFIG_MTD_PHYSMAP=y | ||
| 455 | # CONFIG_MTD_PHYSMAP_COMPAT is not set | ||
| 456 | CONFIG_MTD_PXA2XX=y | ||
| 457 | # CONFIG_MTD_ARM_INTEGRATOR is not set | ||
| 458 | # CONFIG_MTD_PLATRAM is not set | ||
| 459 | |||
| 460 | # | ||
| 461 | # Self-contained MTD device drivers | ||
| 462 | # | ||
| 463 | # CONFIG_MTD_SLRAM is not set | ||
| 464 | # CONFIG_MTD_PHRAM is not set | ||
| 465 | # CONFIG_MTD_MTDRAM is not set | ||
| 466 | |||
| 467 | # | ||
| 468 | # Disk-On-Chip Device Drivers | ||
| 469 | # | ||
| 470 | # CONFIG_MTD_DOC2000 is not set | ||
| 471 | # CONFIG_MTD_DOC2001 is not set | ||
| 472 | # CONFIG_MTD_DOC2001PLUS is not set | ||
| 473 | # CONFIG_MTD_NAND is not set | ||
| 474 | # CONFIG_MTD_ONENAND is not set | ||
| 475 | |||
| 476 | # | ||
| 477 | # LPDDR flash memory drivers | ||
| 478 | # | ||
| 479 | # CONFIG_MTD_LPDDR is not set | ||
| 480 | |||
| 481 | # | ||
| 482 | # UBI - Unsorted block images | ||
| 483 | # | ||
| 484 | # CONFIG_MTD_UBI is not set | ||
| 485 | # CONFIG_PARPORT is not set | ||
| 486 | # CONFIG_MISC_DEVICES is not set | ||
| 487 | CONFIG_HAVE_IDE=y | ||
| 488 | |||
| 489 | # | ||
| 490 | # SCSI device support | ||
| 491 | # | ||
| 492 | # CONFIG_SCSI_DMA is not set | ||
| 493 | # CONFIG_SCSI_NETLINK is not set | ||
| 494 | CONFIG_NETDEVICES=y | ||
| 495 | # CONFIG_DUMMY is not set | ||
| 496 | # CONFIG_BONDING is not set | ||
| 497 | # CONFIG_MACVLAN is not set | ||
| 498 | # CONFIG_EQUALIZER is not set | ||
| 499 | # CONFIG_TUN is not set | ||
| 500 | # CONFIG_VETH is not set | ||
| 501 | # CONFIG_PHYLIB is not set | ||
| 502 | CONFIG_NET_ETHERNET=y | ||
| 503 | CONFIG_MII=y | ||
| 504 | # CONFIG_AX88796 is not set | ||
| 505 | CONFIG_SMC91X=y | ||
| 506 | # CONFIG_DM9000 is not set | ||
| 507 | # CONFIG_ETHOC is not set | ||
| 508 | # CONFIG_SMC911X is not set | ||
| 509 | # CONFIG_SMSC911X is not set | ||
| 510 | # CONFIG_DNET is not set | ||
| 511 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
| 512 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
| 513 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
| 514 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
| 515 | # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set | ||
| 516 | # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set | ||
| 517 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set | ||
| 518 | # CONFIG_B44 is not set | ||
| 519 | # CONFIG_KS8842 is not set | ||
| 520 | # CONFIG_NETDEV_1000 is not set | ||
| 521 | # CONFIG_NETDEV_10000 is not set | ||
| 522 | |||
| 523 | # | ||
| 524 | # Wireless LAN | ||
| 525 | # | ||
| 526 | # CONFIG_WLAN_PRE80211 is not set | ||
| 527 | # CONFIG_WLAN_80211 is not set | ||
| 528 | |||
| 529 | # | ||
| 530 | # Enable WiMAX (Networking options) to see the WiMAX drivers | ||
| 531 | # | ||
| 532 | # CONFIG_WAN is not set | ||
| 533 | # CONFIG_PPP is not set | ||
| 534 | # CONFIG_SLIP is not set | ||
| 535 | # CONFIG_NETCONSOLE is not set | ||
| 536 | # CONFIG_NETPOLL is not set | ||
| 537 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
| 538 | # CONFIG_ISDN is not set | ||
| 539 | |||
| 540 | # | ||
| 541 | # Input device support | ||
| 542 | # | ||
| 543 | CONFIG_INPUT=y | ||
| 544 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
| 545 | # CONFIG_INPUT_POLLDEV is not set | ||
| 546 | |||
| 547 | # | ||
| 548 | # Userland interfaces | ||
| 549 | # | ||
| 550 | # CONFIG_INPUT_MOUSEDEV is not set | ||
| 551 | # CONFIG_INPUT_JOYDEV is not set | ||
| 552 | # CONFIG_INPUT_EVDEV is not set | ||
| 553 | # CONFIG_INPUT_EVBUG is not set | ||
| 554 | |||
| 555 | # | ||
| 556 | # Input Device Drivers | ||
| 557 | # | ||
| 558 | # CONFIG_INPUT_KEYBOARD is not set | ||
| 559 | # CONFIG_INPUT_MOUSE is not set | ||
| 560 | # CONFIG_INPUT_JOYSTICK is not set | ||
| 561 | # CONFIG_INPUT_TABLET is not set | ||
| 562 | # CONFIG_INPUT_TOUCHSCREEN is not set | ||
| 563 | # CONFIG_INPUT_MISC is not set | ||
| 564 | |||
| 565 | # | ||
| 566 | # Hardware I/O ports | ||
| 567 | # | ||
| 568 | # CONFIG_SERIO is not set | ||
| 569 | # CONFIG_GAMEPORT is not set | ||
| 570 | |||
| 571 | # | ||
| 572 | # Character devices | ||
| 573 | # | ||
| 574 | CONFIG_VT=y | ||
| 575 | CONFIG_CONSOLE_TRANSLATIONS=y | ||
| 576 | CONFIG_VT_CONSOLE=y | ||
| 577 | CONFIG_HW_CONSOLE=y | ||
| 578 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
| 579 | # CONFIG_DEVKMEM is not set | ||
| 580 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
| 581 | |||
| 582 | # | ||
| 583 | # Serial drivers | ||
| 584 | # | ||
| 585 | # CONFIG_SERIAL_8250 is not set | ||
| 586 | |||
| 587 | # | ||
| 588 | # Non-8250 serial port support | ||
| 589 | # | ||
| 590 | CONFIG_SERIAL_PXA=y | ||
| 591 | CONFIG_SERIAL_PXA_CONSOLE=y | ||
| 592 | CONFIG_SERIAL_CORE=y | ||
| 593 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
| 594 | CONFIG_UNIX98_PTYS=y | ||
| 595 | # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set | ||
| 596 | # CONFIG_LEGACY_PTYS is not set | ||
| 597 | # CONFIG_IPMI_HANDLER is not set | ||
| 598 | # CONFIG_HW_RANDOM is not set | ||
| 599 | # CONFIG_R3964 is not set | ||
| 600 | # CONFIG_TCG_TPM is not set | ||
| 601 | CONFIG_I2C=m | ||
| 602 | CONFIG_I2C_BOARDINFO=y | ||
| 603 | CONFIG_I2C_CHARDEV=m | ||
| 604 | CONFIG_I2C_HELPER_AUTO=y | ||
| 605 | |||
| 606 | # | ||
| 607 | # I2C Hardware Bus support | ||
| 608 | # | ||
| 609 | |||
| 610 | # | ||
| 611 | # I2C system bus drivers (mostly embedded / system-on-chip) | ||
| 612 | # | ||
| 613 | # CONFIG_I2C_DESIGNWARE is not set | ||
| 614 | # CONFIG_I2C_GPIO is not set | ||
| 615 | # CONFIG_I2C_OCORES is not set | ||
| 616 | CONFIG_I2C_PXA=m | ||
| 617 | # CONFIG_I2C_PXA_SLAVE is not set | ||
| 618 | # CONFIG_I2C_SIMTEC is not set | ||
| 619 | |||
| 620 | # | ||
| 621 | # External I2C/SMBus adapter drivers | ||
| 622 | # | ||
| 623 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
| 624 | # CONFIG_I2C_TAOS_EVM is not set | ||
| 625 | |||
| 626 | # | ||
| 627 | # Other I2C/SMBus bus drivers | ||
| 628 | # | ||
| 629 | # CONFIG_I2C_PCA_PLATFORM is not set | ||
| 630 | # CONFIG_I2C_STUB is not set | ||
| 631 | |||
| 632 | # | ||
| 633 | # Miscellaneous I2C Chip support | ||
| 634 | # | ||
| 635 | # CONFIG_DS1682 is not set | ||
| 636 | # CONFIG_SENSORS_PCF8574 is not set | ||
| 637 | # CONFIG_PCF8575 is not set | ||
| 638 | # CONFIG_SENSORS_PCA9539 is not set | ||
| 639 | # CONFIG_SENSORS_TSL2550 is not set | ||
| 640 | # CONFIG_I2C_DEBUG_CORE is not set | ||
| 641 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
| 642 | # CONFIG_I2C_DEBUG_BUS is not set | ||
| 643 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
| 644 | # CONFIG_SPI is not set | ||
| 645 | CONFIG_ARCH_REQUIRE_GPIOLIB=y | ||
| 646 | CONFIG_GPIOLIB=y | ||
| 647 | # CONFIG_DEBUG_GPIO is not set | ||
| 648 | # CONFIG_GPIO_SYSFS is not set | ||
| 649 | |||
| 650 | # | ||
| 651 | # Memory mapped GPIO expanders: | ||
| 652 | # | ||
| 653 | |||
| 654 | # | ||
| 655 | # I2C GPIO expanders: | ||
| 656 | # | ||
| 657 | # CONFIG_GPIO_MAX732X is not set | ||
| 658 | # CONFIG_GPIO_PCA953X is not set | ||
| 659 | # CONFIG_GPIO_PCF857X is not set | ||
| 660 | |||
| 661 | # | ||
| 662 | # PCI GPIO expanders: | ||
| 663 | # | ||
| 664 | |||
| 665 | # | ||
| 666 | # SPI GPIO expanders: | ||
| 667 | # | ||
| 668 | # CONFIG_W1 is not set | ||
| 669 | # CONFIG_POWER_SUPPLY is not set | ||
| 670 | CONFIG_HWMON=m | ||
| 671 | # CONFIG_HWMON_VID is not set | ||
| 672 | # CONFIG_SENSORS_AD7414 is not set | ||
| 673 | # CONFIG_SENSORS_AD7418 is not set | ||
| 674 | CONFIG_SENSORS_ADM1021=m | ||
| 675 | # CONFIG_SENSORS_ADM1025 is not set | ||
| 676 | # CONFIG_SENSORS_ADM1026 is not set | ||
| 677 | # CONFIG_SENSORS_ADM1029 is not set | ||
| 678 | # CONFIG_SENSORS_ADM1031 is not set | ||
| 679 | # CONFIG_SENSORS_ADM9240 is not set | ||
| 680 | # CONFIG_SENSORS_ADT7462 is not set | ||
| 681 | # CONFIG_SENSORS_ADT7470 is not set | ||
| 682 | # CONFIG_SENSORS_ADT7473 is not set | ||
| 683 | # CONFIG_SENSORS_ADT7475 is not set | ||
| 684 | # CONFIG_SENSORS_ATXP1 is not set | ||
| 685 | # CONFIG_SENSORS_DS1621 is not set | ||
| 686 | # CONFIG_SENSORS_F71805F is not set | ||
| 687 | # CONFIG_SENSORS_F71882FG is not set | ||
| 688 | # CONFIG_SENSORS_F75375S is not set | ||
| 689 | # CONFIG_SENSORS_G760A is not set | ||
| 690 | # CONFIG_SENSORS_GL518SM is not set | ||
| 691 | # CONFIG_SENSORS_GL520SM is not set | ||
| 692 | # CONFIG_SENSORS_IT87 is not set | ||
| 693 | # CONFIG_SENSORS_LM63 is not set | ||
| 694 | # CONFIG_SENSORS_LM75 is not set | ||
| 695 | # CONFIG_SENSORS_LM77 is not set | ||
| 696 | # CONFIG_SENSORS_LM78 is not set | ||
| 697 | # CONFIG_SENSORS_LM80 is not set | ||
| 698 | # CONFIG_SENSORS_LM83 is not set | ||
| 699 | # CONFIG_SENSORS_LM85 is not set | ||
| 700 | # CONFIG_SENSORS_LM87 is not set | ||
| 701 | # CONFIG_SENSORS_LM90 is not set | ||
| 702 | # CONFIG_SENSORS_LM92 is not set | ||
| 703 | # CONFIG_SENSORS_LM93 is not set | ||
| 704 | # CONFIG_SENSORS_LTC4215 is not set | ||
| 705 | # CONFIG_SENSORS_LTC4245 is not set | ||
| 706 | # CONFIG_SENSORS_LM95241 is not set | ||
| 707 | # CONFIG_SENSORS_MAX1619 is not set | ||
| 708 | CONFIG_SENSORS_MAX6650=m | ||
| 709 | # CONFIG_SENSORS_PC87360 is not set | ||
| 710 | # CONFIG_SENSORS_PC87427 is not set | ||
| 711 | # CONFIG_SENSORS_PCF8591 is not set | ||
| 712 | # CONFIG_SENSORS_SHT15 is not set | ||
| 713 | # CONFIG_SENSORS_DME1737 is not set | ||
| 714 | # CONFIG_SENSORS_SMSC47M1 is not set | ||
| 715 | # CONFIG_SENSORS_SMSC47M192 is not set | ||
| 716 | # CONFIG_SENSORS_SMSC47B397 is not set | ||
| 717 | # CONFIG_SENSORS_ADS7828 is not set | ||
| 718 | # CONFIG_SENSORS_THMC50 is not set | ||
| 719 | # CONFIG_SENSORS_TMP401 is not set | ||
| 720 | # CONFIG_SENSORS_VT1211 is not set | ||
| 721 | # CONFIG_SENSORS_W83781D is not set | ||
| 722 | # CONFIG_SENSORS_W83791D is not set | ||
| 723 | # CONFIG_SENSORS_W83792D is not set | ||
| 724 | # CONFIG_SENSORS_W83793 is not set | ||
| 725 | # CONFIG_SENSORS_W83L785TS is not set | ||
| 726 | # CONFIG_SENSORS_W83L786NG is not set | ||
| 727 | # CONFIG_SENSORS_W83627HF is not set | ||
| 728 | # CONFIG_SENSORS_W83627EHF is not set | ||
| 729 | # CONFIG_HWMON_DEBUG_CHIP is not set | ||
| 730 | # CONFIG_THERMAL is not set | ||
| 731 | # CONFIG_WATCHDOG is not set | ||
| 732 | CONFIG_SSB_POSSIBLE=y | ||
| 733 | |||
| 734 | # | ||
| 735 | # Sonics Silicon Backplane | ||
| 736 | # | ||
| 737 | # CONFIG_SSB is not set | ||
| 738 | |||
| 739 | # | ||
| 740 | # Multifunction device drivers | ||
| 741 | # | ||
| 742 | # CONFIG_MFD_CORE is not set | ||
| 743 | # CONFIG_MFD_SM501 is not set | ||
| 744 | # CONFIG_MFD_ASIC3 is not set | ||
| 745 | # CONFIG_HTC_EGPIO is not set | ||
| 746 | # CONFIG_HTC_PASIC3 is not set | ||
| 747 | # CONFIG_TPS65010 is not set | ||
| 748 | # CONFIG_MFD_TMIO is not set | ||
| 749 | # CONFIG_MFD_T7L66XB is not set | ||
| 750 | # CONFIG_MFD_TC6387XB is not set | ||
| 751 | # CONFIG_MFD_TC6393XB is not set | ||
| 752 | # CONFIG_MFD_WM8400 is not set | ||
| 753 | # CONFIG_MFD_WM8350_I2C is not set | ||
| 754 | # CONFIG_MFD_PCF50633 is not set | ||
| 755 | # CONFIG_AB3100_CORE is not set | ||
| 756 | # CONFIG_MEDIA_SUPPORT is not set | ||
| 757 | |||
| 758 | # | ||
| 759 | # Graphics support | ||
| 760 | # | ||
| 761 | # CONFIG_VGASTATE is not set | ||
| 762 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
| 763 | # CONFIG_FB is not set | ||
| 764 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
| 765 | |||
| 766 | # | ||
| 767 | # Display device support | ||
| 768 | # | ||
| 769 | # CONFIG_DISPLAY_SUPPORT is not set | ||
| 770 | |||
| 771 | # | ||
| 772 | # Console display driver support | ||
| 773 | # | ||
| 774 | # CONFIG_VGA_CONSOLE is not set | ||
| 775 | CONFIG_DUMMY_CONSOLE=y | ||
| 776 | # CONFIG_SOUND is not set | ||
| 777 | # CONFIG_HID_SUPPORT is not set | ||
| 778 | # CONFIG_USB_SUPPORT is not set | ||
| 779 | # CONFIG_MMC is not set | ||
| 780 | # CONFIG_MEMSTICK is not set | ||
| 781 | # CONFIG_ACCESSIBILITY is not set | ||
| 782 | # CONFIG_NEW_LEDS is not set | ||
| 783 | CONFIG_RTC_LIB=y | ||
| 784 | CONFIG_RTC_CLASS=m | ||
| 785 | |||
| 786 | # | ||
| 787 | # RTC interfaces | ||
| 788 | # | ||
| 789 | CONFIG_RTC_INTF_SYSFS=y | ||
| 790 | CONFIG_RTC_INTF_PROC=y | ||
| 791 | CONFIG_RTC_INTF_DEV=y | ||
| 792 | # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set | ||
| 793 | # CONFIG_RTC_DRV_TEST is not set | ||
| 794 | |||
| 795 | # | ||
| 796 | # I2C RTC drivers | ||
| 797 | # | ||
| 798 | # CONFIG_RTC_DRV_DS1307 is not set | ||
| 799 | # CONFIG_RTC_DRV_DS1374 is not set | ||
| 800 | # CONFIG_RTC_DRV_DS1672 is not set | ||
| 801 | # CONFIG_RTC_DRV_MAX6900 is not set | ||
| 802 | # CONFIG_RTC_DRV_RS5C372 is not set | ||
| 803 | # CONFIG_RTC_DRV_ISL1208 is not set | ||
| 804 | # CONFIG_RTC_DRV_X1205 is not set | ||
| 805 | # CONFIG_RTC_DRV_PCF8563 is not set | ||
| 806 | # CONFIG_RTC_DRV_PCF8583 is not set | ||
| 807 | # CONFIG_RTC_DRV_M41T80 is not set | ||
| 808 | # CONFIG_RTC_DRV_S35390A is not set | ||
| 809 | # CONFIG_RTC_DRV_FM3130 is not set | ||
| 810 | # CONFIG_RTC_DRV_RX8581 is not set | ||
| 811 | # CONFIG_RTC_DRV_RX8025 is not set | ||
| 812 | |||
| 813 | # | ||
| 814 | # SPI RTC drivers | ||
| 815 | # | ||
| 816 | |||
| 817 | # | ||
| 818 | # Platform RTC drivers | ||
| 819 | # | ||
| 820 | # CONFIG_RTC_DRV_CMOS is not set | ||
| 821 | # CONFIG_RTC_DRV_DS1286 is not set | ||
| 822 | # CONFIG_RTC_DRV_DS1511 is not set | ||
| 823 | # CONFIG_RTC_DRV_DS1553 is not set | ||
| 824 | # CONFIG_RTC_DRV_DS1742 is not set | ||
| 825 | # CONFIG_RTC_DRV_STK17TA8 is not set | ||
| 826 | # CONFIG_RTC_DRV_M48T86 is not set | ||
| 827 | # CONFIG_RTC_DRV_M48T35 is not set | ||
| 828 | # CONFIG_RTC_DRV_M48T59 is not set | ||
| 829 | # CONFIG_RTC_DRV_BQ4802 is not set | ||
| 830 | # CONFIG_RTC_DRV_V3020 is not set | ||
| 831 | |||
| 832 | # | ||
| 833 | # on-CPU RTC drivers | ||
| 834 | # | ||
| 835 | CONFIG_RTC_DRV_SA1100=m | ||
| 836 | # CONFIG_RTC_DRV_PXA is not set | ||
| 837 | CONFIG_DMADEVICES=y | ||
| 838 | |||
| 839 | # | ||
| 840 | # DMA Devices | ||
| 841 | # | ||
| 842 | # CONFIG_AUXDISPLAY is not set | ||
| 843 | # CONFIG_REGULATOR is not set | ||
| 844 | # CONFIG_UIO is not set | ||
| 845 | # CONFIG_STAGING is not set | ||
| 846 | |||
| 847 | # | ||
| 848 | # File systems | ||
| 849 | # | ||
| 850 | CONFIG_FILE_LOCKING=y | ||
| 851 | # CONFIG_FSNOTIFY is not set | ||
| 852 | # CONFIG_DNOTIFY is not set | ||
| 853 | # CONFIG_INOTIFY is not set | ||
| 854 | # CONFIG_INOTIFY_USER is not set | ||
| 855 | # CONFIG_QUOTA is not set | ||
| 856 | # CONFIG_AUTOFS_FS is not set | ||
| 857 | # CONFIG_AUTOFS4_FS is not set | ||
| 858 | # CONFIG_FUSE_FS is not set | ||
| 859 | |||
| 860 | # | ||
| 861 | # Caches | ||
| 862 | # | ||
| 863 | # CONFIG_FSCACHE is not set | ||
| 864 | |||
| 865 | # | ||
| 866 | # Pseudo filesystems | ||
| 867 | # | ||
| 868 | CONFIG_PROC_FS=y | ||
| 869 | CONFIG_PROC_SYSCTL=y | ||
| 870 | CONFIG_PROC_PAGE_MONITOR=y | ||
| 871 | CONFIG_SYSFS=y | ||
| 872 | CONFIG_TMPFS=y | ||
| 873 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
| 874 | # CONFIG_HUGETLB_PAGE is not set | ||
| 875 | # CONFIG_CONFIGFS_FS is not set | ||
| 876 | CONFIG_MISC_FILESYSTEMS=y | ||
| 877 | CONFIG_JFFS2_FS=y | ||
| 878 | CONFIG_JFFS2_FS_DEBUG=0 | ||
| 879 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
| 880 | CONFIG_JFFS2_FS_WBUF_VERIFY=y | ||
| 881 | # CONFIG_JFFS2_SUMMARY is not set | ||
| 882 | # CONFIG_JFFS2_FS_XATTR is not set | ||
| 883 | # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set | ||
| 884 | CONFIG_JFFS2_ZLIB=y | ||
| 885 | # CONFIG_JFFS2_LZO is not set | ||
| 886 | CONFIG_JFFS2_RTIME=y | ||
| 887 | # CONFIG_JFFS2_RUBIN is not set | ||
| 888 | # CONFIG_ROMFS_FS is not set | ||
| 889 | CONFIG_NETWORK_FILESYSTEMS=y | ||
| 890 | CONFIG_NFS_FS=m | ||
| 891 | CONFIG_NFS_V3=y | ||
| 892 | # CONFIG_NFS_V3_ACL is not set | ||
| 893 | # CONFIG_NFS_V4 is not set | ||
| 894 | # CONFIG_NFSD is not set | ||
| 895 | CONFIG_LOCKD=m | ||
| 896 | CONFIG_LOCKD_V4=y | ||
| 897 | CONFIG_NFS_COMMON=y | ||
| 898 | CONFIG_SUNRPC=m | ||
| 899 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
| 900 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
| 901 | # CONFIG_SMB_FS is not set | ||
| 902 | # CONFIG_CIFS is not set | ||
| 903 | # CONFIG_NCP_FS is not set | ||
| 904 | # CONFIG_CODA_FS is not set | ||
| 905 | # CONFIG_AFS_FS is not set | ||
| 906 | CONFIG_NLS=m | ||
| 907 | CONFIG_NLS_DEFAULT="utf8" | ||
| 908 | # CONFIG_NLS_CODEPAGE_437 is not set | ||
| 909 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
| 910 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
| 911 | # CONFIG_NLS_CODEPAGE_850 is not set | ||
| 912 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
| 913 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
| 914 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
| 915 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
| 916 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
| 917 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
| 918 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
| 919 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
| 920 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
| 921 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
| 922 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
| 923 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
| 924 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
| 925 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
| 926 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
| 927 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
| 928 | # CONFIG_NLS_ISO8859_8 is not set | ||
| 929 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
| 930 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
| 931 | # CONFIG_NLS_ASCII is not set | ||
| 932 | # CONFIG_NLS_ISO8859_1 is not set | ||
| 933 | # CONFIG_NLS_ISO8859_2 is not set | ||
| 934 | # CONFIG_NLS_ISO8859_3 is not set | ||
| 935 | # CONFIG_NLS_ISO8859_4 is not set | ||
| 936 | # CONFIG_NLS_ISO8859_5 is not set | ||
| 937 | # CONFIG_NLS_ISO8859_6 is not set | ||
| 938 | # CONFIG_NLS_ISO8859_7 is not set | ||
| 939 | # CONFIG_NLS_ISO8859_9 is not set | ||
| 940 | # CONFIG_NLS_ISO8859_13 is not set | ||
| 941 | # CONFIG_NLS_ISO8859_14 is not set | ||
| 942 | # CONFIG_NLS_ISO8859_15 is not set | ||
| 943 | # CONFIG_NLS_KOI8_R is not set | ||
| 944 | # CONFIG_NLS_KOI8_U is not set | ||
| 945 | CONFIG_NLS_UTF8=m | ||
| 946 | # CONFIG_DLM is not set | ||
| 947 | |||
| 948 | # | ||
| 949 | # Kernel hacking | ||
| 950 | # | ||
| 951 | CONFIG_PRINTK_TIME=y | ||
| 952 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
| 953 | CONFIG_ENABLE_MUST_CHECK=y | ||
| 954 | CONFIG_FRAME_WARN=1024 | ||
| 955 | # CONFIG_MAGIC_SYSRQ is not set | ||
| 956 | # CONFIG_UNUSED_SYMBOLS is not set | ||
| 957 | # CONFIG_DEBUG_FS is not set | ||
| 958 | # CONFIG_HEADERS_CHECK is not set | ||
| 959 | CONFIG_DEBUG_KERNEL=y | ||
| 960 | # CONFIG_DEBUG_SHIRQ is not set | ||
| 961 | CONFIG_DETECT_SOFTLOCKUP=y | ||
| 962 | # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set | ||
| 963 | CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 | ||
| 964 | CONFIG_DETECT_HUNG_TASK=y | ||
| 965 | # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set | ||
| 966 | CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 | ||
| 967 | # CONFIG_SCHED_DEBUG is not set | ||
| 968 | # CONFIG_SCHEDSTATS is not set | ||
| 969 | # CONFIG_TIMER_STATS is not set | ||
| 970 | # CONFIG_DEBUG_OBJECTS is not set | ||
| 971 | # CONFIG_DEBUG_KMEMLEAK is not set | ||
| 972 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
| 973 | # CONFIG_RT_MUTEX_TESTER is not set | ||
| 974 | # CONFIG_DEBUG_SPINLOCK is not set | ||
| 975 | # CONFIG_DEBUG_MUTEXES is not set | ||
| 976 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
| 977 | # CONFIG_PROVE_LOCKING is not set | ||
| 978 | # CONFIG_LOCK_STAT is not set | ||
| 979 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
| 980 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
| 981 | # CONFIG_DEBUG_KOBJECT is not set | ||
| 982 | # CONFIG_DEBUG_BUGVERBOSE is not set | ||
| 983 | # CONFIG_DEBUG_INFO is not set | ||
| 984 | # CONFIG_DEBUG_VM is not set | ||
| 985 | # CONFIG_DEBUG_WRITECOUNT is not set | ||
| 986 | # CONFIG_DEBUG_MEMORY_INIT is not set | ||
| 987 | # CONFIG_DEBUG_LIST is not set | ||
| 988 | # CONFIG_DEBUG_SG is not set | ||
| 989 | # CONFIG_DEBUG_NOTIFIERS is not set | ||
| 990 | CONFIG_FRAME_POINTER=y | ||
| 991 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
| 992 | # CONFIG_RCU_TORTURE_TEST is not set | ||
| 993 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | ||
| 994 | # CONFIG_KPROBES_SANITY_TEST is not set | ||
| 995 | # CONFIG_BACKTRACE_SELF_TEST is not set | ||
| 996 | # CONFIG_FAULT_INJECTION is not set | ||
| 997 | # CONFIG_LATENCYTOP is not set | ||
| 998 | CONFIG_SYSCTL_SYSCALL_CHECK=y | ||
| 999 | # CONFIG_PAGE_POISONING is not set | ||
| 1000 | CONFIG_HAVE_FUNCTION_TRACER=y | ||
| 1001 | CONFIG_TRACING_SUPPORT=y | ||
| 1002 | # CONFIG_FTRACE is not set | ||
| 1003 | # CONFIG_SAMPLES is not set | ||
| 1004 | CONFIG_HAVE_ARCH_KGDB=y | ||
| 1005 | # CONFIG_KGDB is not set | ||
| 1006 | # CONFIG_ARM_UNWIND is not set | ||
| 1007 | # CONFIG_DEBUG_USER is not set | ||
| 1008 | # CONFIG_DEBUG_ERRORS is not set | ||
| 1009 | # CONFIG_DEBUG_STACK_USAGE is not set | ||
| 1010 | # CONFIG_DEBUG_LL is not set | ||
| 1011 | |||
| 1012 | # | ||
| 1013 | # Security options | ||
| 1014 | # | ||
| 1015 | # CONFIG_KEYS is not set | ||
| 1016 | # CONFIG_SECURITY is not set | ||
| 1017 | # CONFIG_SECURITYFS is not set | ||
| 1018 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
| 1019 | CONFIG_CRYPTO=y | ||
| 1020 | |||
| 1021 | # | ||
| 1022 | # Crypto core or helper | ||
| 1023 | # | ||
| 1024 | # CONFIG_CRYPTO_FIPS is not set | ||
| 1025 | CONFIG_CRYPTO_ALGAPI=m | ||
| 1026 | CONFIG_CRYPTO_ALGAPI2=m | ||
| 1027 | CONFIG_CRYPTO_HASH=m | ||
| 1028 | CONFIG_CRYPTO_HASH2=m | ||
| 1029 | # CONFIG_CRYPTO_MANAGER is not set | ||
| 1030 | # CONFIG_CRYPTO_MANAGER2 is not set | ||
| 1031 | # CONFIG_CRYPTO_GF128MUL is not set | ||
| 1032 | # CONFIG_CRYPTO_NULL is not set | ||
| 1033 | # CONFIG_CRYPTO_CRYPTD is not set | ||
| 1034 | # CONFIG_CRYPTO_AUTHENC is not set | ||
| 1035 | # CONFIG_CRYPTO_TEST is not set | ||
| 1036 | |||
| 1037 | # | ||
| 1038 | # Authenticated Encryption with Associated Data | ||
| 1039 | # | ||
| 1040 | # CONFIG_CRYPTO_CCM is not set | ||
| 1041 | # CONFIG_CRYPTO_GCM is not set | ||
| 1042 | # CONFIG_CRYPTO_SEQIV is not set | ||
| 1043 | |||
| 1044 | # | ||
| 1045 | # Block modes | ||
| 1046 | # | ||
| 1047 | # CONFIG_CRYPTO_CBC is not set | ||
| 1048 | # CONFIG_CRYPTO_CTR is not set | ||
| 1049 | # CONFIG_CRYPTO_CTS is not set | ||
| 1050 | # CONFIG_CRYPTO_ECB is not set | ||
| 1051 | # CONFIG_CRYPTO_LRW is not set | ||
| 1052 | # CONFIG_CRYPTO_PCBC is not set | ||
| 1053 | # CONFIG_CRYPTO_XTS is not set | ||
| 1054 | |||
| 1055 | # | ||
| 1056 | # Hash modes | ||
| 1057 | # | ||
| 1058 | # CONFIG_CRYPTO_HMAC is not set | ||
| 1059 | # CONFIG_CRYPTO_XCBC is not set | ||
| 1060 | |||
| 1061 | # | ||
| 1062 | # Digest | ||
| 1063 | # | ||
| 1064 | CONFIG_CRYPTO_CRC32C=m | ||
| 1065 | # CONFIG_CRYPTO_MD4 is not set | ||
| 1066 | # CONFIG_CRYPTO_MD5 is not set | ||
| 1067 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
| 1068 | # CONFIG_CRYPTO_RMD128 is not set | ||
| 1069 | # CONFIG_CRYPTO_RMD160 is not set | ||
| 1070 | # CONFIG_CRYPTO_RMD256 is not set | ||
| 1071 | # CONFIG_CRYPTO_RMD320 is not set | ||
| 1072 | # CONFIG_CRYPTO_SHA1 is not set | ||
| 1073 | # CONFIG_CRYPTO_SHA256 is not set | ||
| 1074 | # CONFIG_CRYPTO_SHA512 is not set | ||
| 1075 | # CONFIG_CRYPTO_TGR192 is not set | ||
| 1076 | # CONFIG_CRYPTO_WP512 is not set | ||
| 1077 | |||
| 1078 | # | ||
| 1079 | # Ciphers | ||
| 1080 | # | ||
| 1081 | # CONFIG_CRYPTO_AES is not set | ||
| 1082 | # CONFIG_CRYPTO_ANUBIS is not set | ||
| 1083 | # CONFIG_CRYPTO_ARC4 is not set | ||
| 1084 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
| 1085 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
| 1086 | # CONFIG_CRYPTO_CAST5 is not set | ||
| 1087 | # CONFIG_CRYPTO_CAST6 is not set | ||
| 1088 | # CONFIG_CRYPTO_DES is not set | ||
| 1089 | # CONFIG_CRYPTO_FCRYPT is not set | ||
| 1090 | # CONFIG_CRYPTO_KHAZAD is not set | ||
| 1091 | # CONFIG_CRYPTO_SALSA20 is not set | ||
| 1092 | # CONFIG_CRYPTO_SEED is not set | ||
| 1093 | # CONFIG_CRYPTO_SERPENT is not set | ||
| 1094 | # CONFIG_CRYPTO_TEA is not set | ||
| 1095 | # CONFIG_CRYPTO_TWOFISH is not set | ||
| 1096 | |||
| 1097 | # | ||
| 1098 | # Compression | ||
| 1099 | # | ||
| 1100 | # CONFIG_CRYPTO_DEFLATE is not set | ||
| 1101 | # CONFIG_CRYPTO_ZLIB is not set | ||
| 1102 | # CONFIG_CRYPTO_LZO is not set | ||
| 1103 | |||
| 1104 | # | ||
| 1105 | # Random Number Generation | ||
| 1106 | # | ||
| 1107 | # CONFIG_CRYPTO_ANSI_CPRNG is not set | ||
| 1108 | # CONFIG_CRYPTO_HW is not set | ||
| 1109 | # CONFIG_BINARY_PRINTF is not set | ||
| 1110 | |||
| 1111 | # | ||
| 1112 | # Library routines | ||
| 1113 | # | ||
| 1114 | CONFIG_BITREVERSE=y | ||
| 1115 | CONFIG_GENERIC_FIND_LAST_BIT=y | ||
| 1116 | # CONFIG_CRC_CCITT is not set | ||
| 1117 | # CONFIG_CRC16 is not set | ||
| 1118 | # CONFIG_CRC_T10DIF is not set | ||
| 1119 | # CONFIG_CRC_ITU_T is not set | ||
| 1120 | CONFIG_CRC32=y | ||
| 1121 | # CONFIG_CRC7 is not set | ||
| 1122 | CONFIG_LIBCRC32C=m | ||
| 1123 | CONFIG_ZLIB_INFLATE=y | ||
| 1124 | CONFIG_ZLIB_DEFLATE=y | ||
| 1125 | CONFIG_DECOMPRESS_GZIP=y | ||
| 1126 | CONFIG_HAS_IOMEM=y | ||
| 1127 | CONFIG_HAS_IOPORT=y | ||
| 1128 | CONFIG_HAS_DMA=y | ||
| 1129 | CONFIG_NLATTR=y | ||
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig deleted file mode 100644 index 7949d04a3602..000000000000 --- a/arch/arm/configs/zylonite_defconfig +++ /dev/null | |||
| @@ -1,736 +0,0 @@ | |||
| 1 | # | ||
| 2 | # Automatically generated make config: don't edit | ||
| 3 | # Linux kernel version: 2.6.23 | ||
| 4 | # Tue Oct 23 13:33:20 2007 | ||
| 5 | # | ||
| 6 | CONFIG_ARM=y | ||
| 7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
| 8 | CONFIG_GENERIC_GPIO=y | ||
| 9 | CONFIG_GENERIC_TIME=y | ||
| 10 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
| 11 | CONFIG_MMU=y | ||
| 12 | # CONFIG_NO_IOPORT is not set | ||
| 13 | CONFIG_GENERIC_HARDIRQS=y | ||
| 14 | CONFIG_STACKTRACE_SUPPORT=y | ||
| 15 | CONFIG_LOCKDEP_SUPPORT=y | ||
| 16 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
| 17 | CONFIG_HARDIRQS_SW_RESEND=y | ||
| 18 | CONFIG_GENERIC_IRQ_PROBE=y | ||
| 19 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
| 20 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
| 21 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
| 22 | CONFIG_GENERIC_HWEIGHT=y | ||
| 23 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
| 24 | CONFIG_ZONE_DMA=y | ||
| 25 | CONFIG_ARCH_MTD_XIP=y | ||
| 26 | CONFIG_VECTORS_BASE=0xffff0000 | ||
| 27 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
| 28 | |||
| 29 | # | ||
| 30 | # General setup | ||
| 31 | # | ||
| 32 | CONFIG_EXPERIMENTAL=y | ||
| 33 | CONFIG_BROKEN_ON_SMP=y | ||
| 34 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
| 35 | CONFIG_LOCALVERSION="" | ||
| 36 | CONFIG_LOCALVERSION_AUTO=y | ||
| 37 | CONFIG_SWAP=y | ||
| 38 | CONFIG_SYSVIPC=y | ||
| 39 | CONFIG_SYSVIPC_SYSCTL=y | ||
| 40 | # CONFIG_POSIX_MQUEUE is not set | ||
| 41 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
| 42 | # CONFIG_TASKSTATS is not set | ||
| 43 | # CONFIG_USER_NS is not set | ||
| 44 | # CONFIG_AUDIT is not set | ||
| 45 | # CONFIG_IKCONFIG is not set | ||
| 46 | CONFIG_LOG_BUF_SHIFT=18 | ||
| 47 | # CONFIG_CGROUPS is not set | ||
| 48 | CONFIG_FAIR_GROUP_SCHED=y | ||
| 49 | CONFIG_FAIR_USER_SCHED=y | ||
| 50 | # CONFIG_FAIR_CGROUP_SCHED is not set | ||
| 51 | CONFIG_SYSFS_DEPRECATED=y | ||
| 52 | # CONFIG_RELAY is not set | ||
| 53 | # CONFIG_BLK_DEV_INITRD is not set | ||
| 54 | # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set | ||
| 55 | CONFIG_SYSCTL=y | ||
| 56 | # CONFIG_EMBEDDED is not set | ||
| 57 | CONFIG_UID16=y | ||
| 58 | CONFIG_SYSCTL_SYSCALL=y | ||
| 59 | CONFIG_KALLSYMS=y | ||
| 60 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
| 61 | CONFIG_HOTPLUG=y | ||
| 62 | CONFIG_PRINTK=y | ||
| 63 | CONFIG_BUG=y | ||
| 64 | CONFIG_ELF_CORE=y | ||
| 65 | CONFIG_BASE_FULL=y | ||
| 66 | CONFIG_FUTEX=y | ||
| 67 | CONFIG_ANON_INODES=y | ||
| 68 | CONFIG_EPOLL=y | ||
| 69 | CONFIG_SIGNALFD=y | ||
| 70 | CONFIG_EVENTFD=y | ||
| 71 | CONFIG_SHMEM=y | ||
| 72 | CONFIG_VM_EVENT_COUNTERS=y | ||
| 73 | CONFIG_SLUB_DEBUG=y | ||
| 74 | # CONFIG_SLAB is not set | ||
| 75 | CONFIG_SLUB=y | ||
| 76 | # CONFIG_SLOB is not set | ||
| 77 | CONFIG_RT_MUTEXES=y | ||
| 78 | # CONFIG_TINY_SHMEM is not set | ||
| 79 | CONFIG_BASE_SMALL=0 | ||
| 80 | CONFIG_MODULES=y | ||
| 81 | # CONFIG_MODULE_UNLOAD is not set | ||
| 82 | # CONFIG_MODVERSIONS is not set | ||
| 83 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
| 84 | # CONFIG_KMOD is not set | ||
| 85 | CONFIG_BLOCK=y | ||
| 86 | # CONFIG_LBD is not set | ||
| 87 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
| 88 | # CONFIG_LSF is not set | ||
| 89 | # CONFIG_BLK_DEV_BSG is not set | ||
| 90 | |||
| 91 | # | ||
| 92 | # IO Schedulers | ||
| 93 | # | ||
| 94 | CONFIG_IOSCHED_NOOP=y | ||
| 95 | CONFIG_IOSCHED_AS=y | ||
| 96 | CONFIG_IOSCHED_DEADLINE=y | ||
| 97 | CONFIG_IOSCHED_CFQ=y | ||
| 98 | # CONFIG_DEFAULT_AS is not set | ||
| 99 | # CONFIG_DEFAULT_DEADLINE is not set | ||
| 100 | CONFIG_DEFAULT_CFQ=y | ||
| 101 | # CONFIG_DEFAULT_NOOP is not set | ||
| 102 | CONFIG_DEFAULT_IOSCHED="cfq" | ||
| 103 | |||
| 104 | # | ||
| 105 | # System Type | ||
| 106 | # | ||
| 107 | # CONFIG_ARCH_AAEC2000 is not set | ||
| 108 | # CONFIG_ARCH_INTEGRATOR is not set | ||
| 109 | # CONFIG_ARCH_REALVIEW is not set | ||
| 110 | # CONFIG_ARCH_VERSATILE is not set | ||
| 111 | # CONFIG_ARCH_AT91 is not set | ||
| 112 | # CONFIG_ARCH_CLPS7500 is not set | ||
| 113 | # CONFIG_ARCH_CLPS711X is not set | ||
| 114 | # CONFIG_ARCH_CO285 is not set | ||
| 115 | # CONFIG_ARCH_EBSA110 is not set | ||
| 116 | # CONFIG_ARCH_EP93XX is not set | ||
| 117 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
| 118 | # CONFIG_ARCH_NETX is not set | ||
| 119 | # CONFIG_ARCH_H720X is not set | ||
| 120 | # CONFIG_ARCH_IMX is not set | ||
| 121 | # CONFIG_ARCH_IOP13XX is not set | ||
| 122 | # CONFIG_ARCH_IOP32X is not set | ||
| 123 | # CONFIG_ARCH_IOP33X is not set | ||
| 124 | # CONFIG_ARCH_IXP23XX is not set | ||
| 125 | # CONFIG_ARCH_IXP2000 is not set | ||
| 126 | # CONFIG_ARCH_IXP4XX is not set | ||
| 127 | # CONFIG_ARCH_L7200 is not set | ||
| 128 | # CONFIG_ARCH_KS8695 is not set | ||
| 129 | # CONFIG_ARCH_NS9XXX is not set | ||
| 130 | # CONFIG_ARCH_MXC is not set | ||
| 131 | # CONFIG_ARCH_PNX4008 is not set | ||
| 132 | CONFIG_ARCH_PXA=y | ||
| 133 | # CONFIG_ARCH_RPC is not set | ||
| 134 | # CONFIG_ARCH_SA1100 is not set | ||
| 135 | # CONFIG_ARCH_S3C2410 is not set | ||
| 136 | # CONFIG_ARCH_SHARK is not set | ||
| 137 | # CONFIG_ARCH_LH7A40X is not set | ||
| 138 | # CONFIG_ARCH_DAVINCI is not set | ||
| 139 | # CONFIG_ARCH_OMAP is not set | ||
| 140 | |||
| 141 | # | ||
| 142 | # Intel PXA2xx/PXA3xx Implementations | ||
| 143 | # | ||
| 144 | |||
| 145 | # | ||
| 146 | # Supported PXA3xx Processor Variants | ||
| 147 | # | ||
| 148 | CONFIG_CPU_PXA300=y | ||
| 149 | CONFIG_CPU_PXA310=y | ||
| 150 | CONFIG_CPU_PXA320=y | ||
| 151 | # CONFIG_ARCH_LUBBOCK is not set | ||
| 152 | # CONFIG_MACH_LOGICPD_PXA270 is not set | ||
| 153 | # CONFIG_MACH_MAINSTONE is not set | ||
| 154 | # CONFIG_ARCH_PXA_IDP is not set | ||
| 155 | # CONFIG_PXA_SHARPSL is not set | ||
| 156 | # CONFIG_MACH_TRIZEPS4 is not set | ||
| 157 | # CONFIG_MACH_EM_X270 is not set | ||
| 158 | CONFIG_MACH_ZYLONITE=y | ||
| 159 | # CONFIG_MACH_ARMCORE is not set | ||
| 160 | CONFIG_PXA3xx=y | ||
| 161 | |||
| 162 | # | ||
| 163 | # Boot options | ||
| 164 | # | ||
| 165 | |||
| 166 | # | ||
| 167 | # Power management | ||
| 168 | # | ||
| 169 | |||
| 170 | # | ||
| 171 | # Processor Type | ||
| 172 | # | ||
| 173 | CONFIG_CPU_32=y | ||
| 174 | CONFIG_CPU_XSC3=y | ||
| 175 | CONFIG_CPU_32v5=y | ||
| 176 | CONFIG_CPU_ABRT_EV5T=y | ||
| 177 | CONFIG_CPU_CACHE_VIVT=y | ||
| 178 | CONFIG_CPU_TLB_V4WBI=y | ||
| 179 | CONFIG_CPU_CP15=y | ||
| 180 | CONFIG_CPU_CP15_MMU=y | ||
| 181 | CONFIG_IO_36=y | ||
| 182 | |||
| 183 | # | ||
| 184 | # Processor Features | ||
| 185 | # | ||
| 186 | # CONFIG_ARM_THUMB is not set | ||
| 187 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
| 188 | # CONFIG_CPU_BPREDICT_DISABLE is not set | ||
| 189 | # CONFIG_OUTER_CACHE is not set | ||
| 190 | CONFIG_IWMMXT=y | ||
| 191 | |||
| 192 | # | ||
| 193 | # Bus support | ||
| 194 | # | ||
| 195 | # CONFIG_PCI_SYSCALL is not set | ||
| 196 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
| 197 | # CONFIG_PCCARD is not set | ||
| 198 | |||
| 199 | # | ||
| 200 | # Kernel Features | ||
| 201 | # | ||
| 202 | # CONFIG_TICK_ONESHOT is not set | ||
| 203 | # CONFIG_NO_HZ is not set | ||
| 204 | # CONFIG_HIGH_RES_TIMERS is not set | ||
| 205 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
| 206 | # CONFIG_PREEMPT is not set | ||
| 207 | CONFIG_HZ=100 | ||
| 208 | CONFIG_AEABI=y | ||
| 209 | CONFIG_OABI_COMPAT=y | ||
| 210 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
| 211 | CONFIG_SELECT_MEMORY_MODEL=y | ||
| 212 | CONFIG_FLATMEM_MANUAL=y | ||
| 213 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
| 214 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
| 215 | CONFIG_FLATMEM=y | ||
| 216 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
| 217 | # CONFIG_SPARSEMEM_STATIC is not set | ||
| 218 | # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set | ||
| 219 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
| 220 | # CONFIG_RESOURCES_64BIT is not set | ||
| 221 | CONFIG_ZONE_DMA_FLAG=1 | ||
| 222 | CONFIG_BOUNCE=y | ||
| 223 | CONFIG_VIRT_TO_BUS=y | ||
| 224 | CONFIG_ALIGNMENT_TRAP=y | ||
| 225 | |||
| 226 | # | ||
| 227 | # Boot options | ||
| 228 | # | ||
| 229 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
| 230 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
| 231 | CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug" | ||
| 232 | # CONFIG_XIP_KERNEL is not set | ||
| 233 | # CONFIG_KEXEC is not set | ||
| 234 | |||
| 235 | # | ||
| 236 | # Floating point emulation | ||
| 237 | # | ||
| 238 | |||
| 239 | # | ||
| 240 | # At least one emulation must be selected | ||
| 241 | # | ||
| 242 | CONFIG_FPE_NWFPE=y | ||
| 243 | # CONFIG_FPE_NWFPE_XP is not set | ||
| 244 | # CONFIG_FPE_FASTFPE is not set | ||
| 245 | |||
| 246 | # | ||
| 247 | # Userspace binary formats | ||
| 248 | # | ||
| 249 | CONFIG_BINFMT_ELF=y | ||
| 250 | # CONFIG_BINFMT_AOUT is not set | ||
| 251 | # CONFIG_BINFMT_MISC is not set | ||
| 252 | |||
| 253 | # | ||
| 254 | # Power management options | ||
| 255 | # | ||
| 256 | # CONFIG_PM is not set | ||
| 257 | CONFIG_SUSPEND_UP_POSSIBLE=y | ||
| 258 | |||
| 259 | # | ||
| 260 | # Networking | ||
| 261 | # | ||
| 262 | CONFIG_NET=y | ||
| 263 | |||
| 264 | # | ||
| 265 | # Networking options | ||
| 266 | # | ||
| 267 | CONFIG_PACKET=y | ||
| 268 | # CONFIG_PACKET_MMAP is not set | ||
| 269 | CONFIG_UNIX=y | ||
| 270 | # CONFIG_NET_KEY is not set | ||
| 271 | CONFIG_INET=y | ||
| 272 | # CONFIG_IP_MULTICAST is not set | ||
| 273 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
| 274 | CONFIG_IP_FIB_HASH=y | ||
| 275 | CONFIG_IP_PNP=y | ||
| 276 | CONFIG_IP_PNP_DHCP=y | ||
| 277 | CONFIG_IP_PNP_BOOTP=y | ||
| 278 | CONFIG_IP_PNP_RARP=y | ||
| 279 | # CONFIG_NET_IPIP is not set | ||
| 280 | # CONFIG_NET_IPGRE is not set | ||
| 281 | # CONFIG_ARPD is not set | ||
| 282 | # CONFIG_SYN_COOKIES is not set | ||
| 283 | # CONFIG_INET_AH is not set | ||
| 284 | # CONFIG_INET_ESP is not set | ||
| 285 | # CONFIG_INET_IPCOMP is not set | ||
| 286 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
| 287 | # CONFIG_INET_TUNNEL is not set | ||
| 288 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
| 289 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
| 290 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
| 291 | # CONFIG_INET_LRO is not set | ||
| 292 | # CONFIG_INET_DIAG is not set | ||
| 293 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
| 294 | CONFIG_TCP_CONG_CUBIC=y | ||
| 295 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
| 296 | # CONFIG_TCP_MD5SIG is not set | ||
| 297 | # CONFIG_IPV6 is not set | ||
| 298 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
| 299 | # CONFIG_INET6_TUNNEL is not set | ||
| 300 | # CONFIG_NETWORK_SECMARK is not set | ||
| 301 | # CONFIG_NETFILTER is not set | ||
| 302 | # CONFIG_IP_DCCP is not set | ||
| 303 | # CONFIG_IP_SCTP is not set | ||
| 304 | # CONFIG_TIPC is not set | ||
| 305 | # CONFIG_ATM is not set | ||
| 306 | # CONFIG_BRIDGE is not set | ||
| 307 | # CONFIG_VLAN_8021Q is not set | ||
| 308 | # CONFIG_DECNET is not set | ||
| 309 | # CONFIG_LLC2 is not set | ||
| 310 | # CONFIG_IPX is not set | ||
| 311 | # CONFIG_ATALK is not set | ||
| 312 | # CONFIG_X25 is not set | ||
| 313 | # CONFIG_LAPB is not set | ||
| 314 | # CONFIG_ECONET is not set | ||
| 315 | # CONFIG_WAN_ROUTER is not set | ||
| 316 | # CONFIG_NET_SCHED is not set | ||
| 317 | |||
| 318 | # | ||
| 319 | # Network testing | ||
| 320 | # | ||
| 321 | # CONFIG_NET_PKTGEN is not set | ||
| 322 | # CONFIG_HAMRADIO is not set | ||
| 323 | # CONFIG_IRDA is not set | ||
| 324 | # CONFIG_BT is not set | ||
| 325 | # CONFIG_AF_RXRPC is not set | ||
| 326 | |||
| 327 | # | ||
| 328 | # Wireless | ||
| 329 | # | ||
| 330 | # CONFIG_CFG80211 is not set | ||
| 331 | # CONFIG_WIRELESS_EXT is not set | ||
| 332 | # CONFIG_MAC80211 is not set | ||
| 333 | # CONFIG_IEEE80211 is not set | ||
| 334 | # CONFIG_RFKILL is not set | ||
| 335 | # CONFIG_NET_9P is not set | ||
| 336 | |||
| 337 | # | ||
| 338 | # Device Drivers | ||
| 339 | # | ||
| 340 | |||
| 341 | # | ||
| 342 | # Generic Driver Options | ||
| 343 | # | ||
| 344 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
| 345 | CONFIG_STANDALONE=y | ||
| 346 | CONFIG_PREVENT_FIRMWARE_BUILD=y | ||
| 347 | CONFIG_FW_LOADER=y | ||
| 348 | # CONFIG_SYS_HYPERVISOR is not set | ||
| 349 | # CONFIG_CONNECTOR is not set | ||
| 350 | # CONFIG_MTD is not set | ||
| 351 | # CONFIG_PARPORT is not set | ||
| 352 | # CONFIG_BLK_DEV is not set | ||
| 353 | # CONFIG_MISC_DEVICES is not set | ||
| 354 | # CONFIG_IDE is not set | ||
| 355 | |||
| 356 | # | ||
| 357 | # SCSI device support | ||
| 358 | # | ||
| 359 | # CONFIG_RAID_ATTRS is not set | ||
| 360 | # CONFIG_SCSI is not set | ||
| 361 | # CONFIG_SCSI_DMA is not set | ||
| 362 | # CONFIG_SCSI_NETLINK is not set | ||
| 363 | # CONFIG_ATA is not set | ||
| 364 | # CONFIG_MD is not set | ||
| 365 | CONFIG_NETDEVICES=y | ||
| 366 | # CONFIG_NETDEVICES_MULTIQUEUE is not set | ||
| 367 | # CONFIG_DUMMY is not set | ||
| 368 | # CONFIG_BONDING is not set | ||
| 369 | # CONFIG_MACVLAN is not set | ||
| 370 | # CONFIG_EQUALIZER is not set | ||
| 371 | # CONFIG_TUN is not set | ||
| 372 | # CONFIG_VETH is not set | ||
| 373 | # CONFIG_PHYLIB is not set | ||
| 374 | CONFIG_NET_ETHERNET=y | ||
| 375 | CONFIG_MII=y | ||
| 376 | # CONFIG_AX88796 is not set | ||
| 377 | CONFIG_SMC91X=y | ||
| 378 | # CONFIG_DM9000 is not set | ||
| 379 | # CONFIG_SMC911X is not set | ||
| 380 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
| 381 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
| 382 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
| 383 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
| 384 | # CONFIG_B44 is not set | ||
| 385 | # CONFIG_NETDEV_1000 is not set | ||
| 386 | # CONFIG_NETDEV_10000 is not set | ||
| 387 | |||
| 388 | # | ||
| 389 | # Wireless LAN | ||
| 390 | # | ||
| 391 | # CONFIG_WLAN_PRE80211 is not set | ||
| 392 | # CONFIG_WLAN_80211 is not set | ||
| 393 | # CONFIG_WAN is not set | ||
| 394 | # CONFIG_PPP is not set | ||
| 395 | # CONFIG_SLIP is not set | ||
| 396 | # CONFIG_SHAPER is not set | ||
| 397 | # CONFIG_NETCONSOLE is not set | ||
| 398 | # CONFIG_NETPOLL is not set | ||
| 399 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
| 400 | # CONFIG_ISDN is not set | ||
| 401 | |||
| 402 | # | ||
| 403 | # Input device support | ||
| 404 | # | ||
| 405 | CONFIG_INPUT=y | ||
| 406 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
| 407 | # CONFIG_INPUT_POLLDEV is not set | ||
| 408 | |||
| 409 | # | ||
| 410 | # Userland interfaces | ||
| 411 | # | ||
| 412 | CONFIG_INPUT_MOUSEDEV=y | ||
| 413 | # CONFIG_INPUT_MOUSEDEV_PSAUX is not set | ||
| 414 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
| 415 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
| 416 | # CONFIG_INPUT_JOYDEV is not set | ||
| 417 | # CONFIG_INPUT_EVDEV is not set | ||
| 418 | # CONFIG_INPUT_EVBUG is not set | ||
| 419 | |||
| 420 | # | ||
| 421 | # Input Device Drivers | ||
| 422 | # | ||
| 423 | # CONFIG_INPUT_KEYBOARD is not set | ||
| 424 | # CONFIG_INPUT_MOUSE is not set | ||
| 425 | # CONFIG_INPUT_JOYSTICK is not set | ||
| 426 | # CONFIG_INPUT_TABLET is not set | ||
| 427 | # CONFIG_INPUT_TOUCHSCREEN is not set | ||
| 428 | # CONFIG_INPUT_MISC is not set | ||
| 429 | |||
| 430 | # | ||
| 431 | # Hardware I/O ports | ||
| 432 | # | ||
| 433 | # CONFIG_SERIO is not set | ||
| 434 | # CONFIG_GAMEPORT is not set | ||
| 435 | |||
| 436 | # | ||
| 437 | # Character devices | ||
| 438 | # | ||
| 439 | CONFIG_VT=y | ||
| 440 | CONFIG_VT_CONSOLE=y | ||
| 441 | CONFIG_HW_CONSOLE=y | ||
| 442 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
| 443 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
| 444 | |||
| 445 | # | ||
| 446 | # Serial drivers | ||
| 447 | # | ||
| 448 | # CONFIG_SERIAL_8250 is not set | ||
| 449 | |||
| 450 | # | ||
| 451 | # Non-8250 serial port support | ||
| 452 | # | ||
| 453 | CONFIG_SERIAL_PXA=y | ||
| 454 | CONFIG_SERIAL_PXA_CONSOLE=y | ||
| 455 | CONFIG_SERIAL_CORE=y | ||
| 456 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
| 457 | CONFIG_UNIX98_PTYS=y | ||
| 458 | # CONFIG_LEGACY_PTYS is not set | ||
| 459 | # CONFIG_IPMI_HANDLER is not set | ||
| 460 | # CONFIG_HW_RANDOM is not set | ||
| 461 | # CONFIG_NVRAM is not set | ||
| 462 | # CONFIG_R3964 is not set | ||
| 463 | # CONFIG_RAW_DRIVER is not set | ||
| 464 | # CONFIG_TCG_TPM is not set | ||
| 465 | # CONFIG_I2C is not set | ||
| 466 | |||
| 467 | # | ||
| 468 | # SPI support | ||
| 469 | # | ||
| 470 | # CONFIG_SPI is not set | ||
| 471 | # CONFIG_SPI_MASTER is not set | ||
| 472 | # CONFIG_W1 is not set | ||
| 473 | # CONFIG_POWER_SUPPLY is not set | ||
| 474 | # CONFIG_HWMON is not set | ||
| 475 | |||
| 476 | # | ||
| 477 | # Sonics Silicon Backplane | ||
| 478 | # | ||
| 479 | CONFIG_SSB_POSSIBLE=y | ||
| 480 | # CONFIG_SSB is not set | ||
| 481 | |||
| 482 | # | ||
| 483 | # Multifunction device drivers | ||
| 484 | # | ||
| 485 | # CONFIG_MFD_SM501 is not set | ||
| 486 | |||
| 487 | # | ||
| 488 | # Multimedia devices | ||
| 489 | # | ||
| 490 | # CONFIG_VIDEO_DEV is not set | ||
| 491 | # CONFIG_DVB_CORE is not set | ||
| 492 | # CONFIG_DAB is not set | ||
| 493 | |||
| 494 | # | ||
| 495 | # Graphics support | ||
| 496 | # | ||
| 497 | # CONFIG_VGASTATE is not set | ||
| 498 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
| 499 | CONFIG_FB=y | ||
| 500 | # CONFIG_FIRMWARE_EDID is not set | ||
| 501 | # CONFIG_FB_DDC is not set | ||
| 502 | CONFIG_FB_CFB_FILLRECT=y | ||
| 503 | CONFIG_FB_CFB_COPYAREA=y | ||
| 504 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
| 505 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
| 506 | # CONFIG_FB_SYS_FILLRECT is not set | ||
| 507 | # CONFIG_FB_SYS_COPYAREA is not set | ||
| 508 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
| 509 | # CONFIG_FB_SYS_FOPS is not set | ||
| 510 | CONFIG_FB_DEFERRED_IO=y | ||
| 511 | # CONFIG_FB_SVGALIB is not set | ||
| 512 | # CONFIG_FB_MACMODES is not set | ||
| 513 | # CONFIG_FB_BACKLIGHT is not set | ||
| 514 | # CONFIG_FB_MODE_HELPERS is not set | ||
| 515 | # CONFIG_FB_TILEBLITTING is not set | ||
| 516 | |||
| 517 | # | ||
| 518 | # Frame buffer hardware drivers | ||
| 519 | # | ||
| 520 | # CONFIG_FB_S1D13XXX is not set | ||
| 521 | CONFIG_FB_PXA=y | ||
| 522 | # CONFIG_FB_PXA_PARAMETERS is not set | ||
| 523 | # CONFIG_FB_MBX is not set | ||
| 524 | # CONFIG_FB_VIRTUAL is not set | ||
| 525 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
| 526 | |||
| 527 | # | ||
| 528 | # Display device support | ||
| 529 | # | ||
| 530 | # CONFIG_DISPLAY_SUPPORT is not set | ||
| 531 | |||
| 532 | # | ||
| 533 | # Console display driver support | ||
| 534 | # | ||
| 535 | # CONFIG_VGA_CONSOLE is not set | ||
| 536 | CONFIG_DUMMY_CONSOLE=y | ||
| 537 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
| 538 | CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y | ||
| 539 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
| 540 | CONFIG_FONTS=y | ||
| 541 | # CONFIG_FONT_8x8 is not set | ||
| 542 | # CONFIG_FONT_8x16 is not set | ||
| 543 | CONFIG_FONT_6x11=y | ||
| 544 | # CONFIG_FONT_7x14 is not set | ||
| 545 | # CONFIG_FONT_PEARL_8x8 is not set | ||
| 546 | # CONFIG_FONT_ACORN_8x8 is not set | ||
| 547 | # CONFIG_FONT_MINI_4x6 is not set | ||
| 548 | # CONFIG_FONT_SUN8x16 is not set | ||
| 549 | # CONFIG_FONT_SUN12x22 is not set | ||
| 550 | # CONFIG_FONT_10x18 is not set | ||
| 551 | CONFIG_LOGO=y | ||
| 552 | CONFIG_LOGO_LINUX_MONO=y | ||
| 553 | CONFIG_LOGO_LINUX_VGA16=y | ||
| 554 | CONFIG_LOGO_LINUX_CLUT224=y | ||
| 555 | |||
| 556 | # | ||
| 557 | # Sound | ||
| 558 | # | ||
| 559 | # CONFIG_SOUND is not set | ||
| 560 | # CONFIG_HID_SUPPORT is not set | ||
| 561 | # CONFIG_USB_SUPPORT is not set | ||
| 562 | # CONFIG_MMC is not set | ||
| 563 | # CONFIG_NEW_LEDS is not set | ||
| 564 | CONFIG_RTC_LIB=y | ||
| 565 | # CONFIG_RTC_CLASS is not set | ||
| 566 | |||
| 567 | # | ||
| 568 | # File systems | ||
| 569 | # | ||
| 570 | # CONFIG_EXT2_FS is not set | ||
| 571 | # CONFIG_EXT3_FS is not set | ||
| 572 | # CONFIG_EXT4DEV_FS is not set | ||
| 573 | # CONFIG_REISERFS_FS is not set | ||
| 574 | # CONFIG_JFS_FS is not set | ||
| 575 | CONFIG_FS_POSIX_ACL=y | ||
| 576 | # CONFIG_XFS_FS is not set | ||
| 577 | # CONFIG_GFS2_FS is not set | ||
| 578 | # CONFIG_OCFS2_FS is not set | ||
| 579 | # CONFIG_MINIX_FS is not set | ||
| 580 | # CONFIG_ROMFS_FS is not set | ||
| 581 | # CONFIG_INOTIFY is not set | ||
| 582 | # CONFIG_QUOTA is not set | ||
| 583 | CONFIG_DNOTIFY=y | ||
| 584 | # CONFIG_AUTOFS_FS is not set | ||
| 585 | # CONFIG_AUTOFS4_FS is not set | ||
| 586 | # CONFIG_FUSE_FS is not set | ||
| 587 | |||
| 588 | # | ||
| 589 | # CD-ROM/DVD Filesystems | ||
| 590 | # | ||
| 591 | # CONFIG_ISO9660_FS is not set | ||
| 592 | # CONFIG_UDF_FS is not set | ||
| 593 | |||
| 594 | # | ||
| 595 | # DOS/FAT/NT Filesystems | ||
| 596 | # | ||
| 597 | # CONFIG_MSDOS_FS is not set | ||
| 598 | # CONFIG_VFAT_FS is not set | ||
| 599 | # CONFIG_NTFS_FS is not set | ||
| 600 | |||
| 601 | # | ||
| 602 | # Pseudo filesystems | ||
| 603 | # | ||
| 604 | CONFIG_PROC_FS=y | ||
| 605 | CONFIG_PROC_SYSCTL=y | ||
| 606 | CONFIG_SYSFS=y | ||
| 607 | # CONFIG_TMPFS is not set | ||
| 608 | # CONFIG_HUGETLB_PAGE is not set | ||
| 609 | # CONFIG_CONFIGFS_FS is not set | ||
| 610 | |||
| 611 | # | ||
| 612 | # Miscellaneous filesystems | ||
| 613 | # | ||
| 614 | # CONFIG_ADFS_FS is not set | ||
| 615 | # CONFIG_AFFS_FS is not set | ||
| 616 | # CONFIG_HFS_FS is not set | ||
| 617 | # CONFIG_HFSPLUS_FS is not set | ||
| 618 | # CONFIG_BEFS_FS is not set | ||
| 619 | # CONFIG_BFS_FS is not set | ||
| 620 | # CONFIG_EFS_FS is not set | ||
| 621 | # CONFIG_CRAMFS is not set | ||
| 622 | # CONFIG_VXFS_FS is not set | ||
| 623 | # CONFIG_HPFS_FS is not set | ||
| 624 | # CONFIG_QNX4FS_FS is not set | ||
| 625 | # CONFIG_SYSV_FS is not set | ||
| 626 | # CONFIG_UFS_FS is not set | ||
| 627 | CONFIG_NETWORK_FILESYSTEMS=y | ||
| 628 | CONFIG_NFS_FS=y | ||
| 629 | CONFIG_NFS_V3=y | ||
| 630 | CONFIG_NFS_V3_ACL=y | ||
| 631 | CONFIG_NFS_V4=y | ||
| 632 | CONFIG_NFS_DIRECTIO=y | ||
| 633 | # CONFIG_NFSD is not set | ||
| 634 | CONFIG_ROOT_NFS=y | ||
| 635 | CONFIG_LOCKD=y | ||
| 636 | CONFIG_LOCKD_V4=y | ||
| 637 | CONFIG_NFS_ACL_SUPPORT=y | ||
| 638 | CONFIG_NFS_COMMON=y | ||
| 639 | CONFIG_SUNRPC=y | ||
| 640 | CONFIG_SUNRPC_GSS=y | ||
| 641 | # CONFIG_SUNRPC_BIND34 is not set | ||
| 642 | CONFIG_RPCSEC_GSS_KRB5=y | ||
| 643 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
| 644 | # CONFIG_SMB_FS is not set | ||
| 645 | # CONFIG_CIFS is not set | ||
| 646 | # CONFIG_NCP_FS is not set | ||
| 647 | # CONFIG_CODA_FS is not set | ||
| 648 | # CONFIG_AFS_FS is not set | ||
| 649 | |||
| 650 | # | ||
| 651 | # Partition Types | ||
| 652 | # | ||
| 653 | # CONFIG_PARTITION_ADVANCED is not set | ||
| 654 | CONFIG_MSDOS_PARTITION=y | ||
| 655 | # CONFIG_NLS is not set | ||
| 656 | # CONFIG_DLM is not set | ||
| 657 | # CONFIG_INSTRUMENTATION is not set | ||
| 658 | |||
| 659 | # | ||
| 660 | # Kernel hacking | ||
| 661 | # | ||
| 662 | # CONFIG_PRINTK_TIME is not set | ||
| 663 | CONFIG_ENABLE_MUST_CHECK=y | ||
| 664 | # CONFIG_MAGIC_SYSRQ is not set | ||
| 665 | # CONFIG_UNUSED_SYMBOLS is not set | ||
| 666 | # CONFIG_DEBUG_FS is not set | ||
| 667 | # CONFIG_HEADERS_CHECK is not set | ||
| 668 | # CONFIG_DEBUG_KERNEL is not set | ||
| 669 | # CONFIG_SLUB_DEBUG_ON is not set | ||
| 670 | CONFIG_DEBUG_BUGVERBOSE=y | ||
| 671 | CONFIG_FRAME_POINTER=y | ||
| 672 | # CONFIG_SAMPLES is not set | ||
| 673 | CONFIG_DEBUG_USER=y | ||
| 674 | |||
| 675 | # | ||
| 676 | # Security options | ||
| 677 | # | ||
| 678 | # CONFIG_KEYS is not set | ||
| 679 | # CONFIG_SECURITY is not set | ||
| 680 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
| 681 | CONFIG_CRYPTO=y | ||
| 682 | CONFIG_CRYPTO_ALGAPI=y | ||
| 683 | CONFIG_CRYPTO_BLKCIPHER=y | ||
| 684 | CONFIG_CRYPTO_MANAGER=y | ||
| 685 | # CONFIG_CRYPTO_HMAC is not set | ||
| 686 | # CONFIG_CRYPTO_XCBC is not set | ||
| 687 | # CONFIG_CRYPTO_NULL is not set | ||
| 688 | # CONFIG_CRYPTO_MD4 is not set | ||
| 689 | CONFIG_CRYPTO_MD5=y | ||
| 690 | # CONFIG_CRYPTO_SHA1 is not set | ||
| 691 | # CONFIG_CRYPTO_SHA256 is not set | ||
| 692 | # CONFIG_CRYPTO_SHA512 is not set | ||
| 693 | # CONFIG_CRYPTO_WP512 is not set | ||
| 694 | # CONFIG_CRYPTO_TGR192 is not set | ||
| 695 | # CONFIG_CRYPTO_GF128MUL is not set | ||
| 696 | # CONFIG_CRYPTO_ECB is not set | ||
| 697 | CONFIG_CRYPTO_CBC=y | ||
| 698 | # CONFIG_CRYPTO_PCBC is not set | ||
| 699 | # CONFIG_CRYPTO_LRW is not set | ||
| 700 | # CONFIG_CRYPTO_XTS is not set | ||
| 701 | # CONFIG_CRYPTO_CRYPTD is not set | ||
| 702 | CONFIG_CRYPTO_DES=y | ||
| 703 | # CONFIG_CRYPTO_FCRYPT is not set | ||
| 704 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
| 705 | # CONFIG_CRYPTO_TWOFISH is not set | ||
| 706 | # CONFIG_CRYPTO_SERPENT is not set | ||
| 707 | # CONFIG_CRYPTO_AES is not set | ||
| 708 | # CONFIG_CRYPTO_CAST5 is not set | ||
| 709 | # CONFIG_CRYPTO_CAST6 is not set | ||
| 710 | # CONFIG_CRYPTO_TEA is not set | ||
| 711 | # CONFIG_CRYPTO_ARC4 is not set | ||
| 712 | # CONFIG_CRYPTO_KHAZAD is not set | ||
| 713 | # CONFIG_CRYPTO_ANUBIS is not set | ||
| 714 | # CONFIG_CRYPTO_SEED is not set | ||
| 715 | # CONFIG_CRYPTO_DEFLATE is not set | ||
| 716 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
| 717 | # CONFIG_CRYPTO_CRC32C is not set | ||
| 718 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
| 719 | # CONFIG_CRYPTO_TEST is not set | ||
| 720 | # CONFIG_CRYPTO_AUTHENC is not set | ||
| 721 | # CONFIG_CRYPTO_HW is not set | ||
| 722 | |||
| 723 | # | ||
| 724 | # Library routines | ||
| 725 | # | ||
| 726 | CONFIG_BITREVERSE=y | ||
| 727 | # CONFIG_CRC_CCITT is not set | ||
| 728 | # CONFIG_CRC16 is not set | ||
| 729 | # CONFIG_CRC_ITU_T is not set | ||
| 730 | CONFIG_CRC32=y | ||
| 731 | # CONFIG_CRC7 is not set | ||
| 732 | # CONFIG_LIBCRC32C is not set | ||
| 733 | CONFIG_PLIST=y | ||
| 734 | CONFIG_HAS_IOMEM=y | ||
| 735 | CONFIG_HAS_IOPORT=y | ||
| 736 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9ed2377fe8e5..d0daeab2234e 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h | |||
| @@ -19,31 +19,21 @@ | |||
| 19 | 19 | ||
| 20 | #ifdef __KERNEL__ | 20 | #ifdef __KERNEL__ |
| 21 | 21 | ||
| 22 | /* | ||
| 23 | * On ARM, ordinary assignment (str instruction) doesn't clear the local | ||
| 24 | * strex/ldrex monitor on some implementations. The reason we can use it for | ||
| 25 | * atomic_set() is the clrex or dummy strex done on every exception return. | ||
| 26 | */ | ||
| 22 | #define atomic_read(v) ((v)->counter) | 27 | #define atomic_read(v) ((v)->counter) |
| 28 | #define atomic_set(v,i) (((v)->counter) = (i)) | ||
| 23 | 29 | ||
| 24 | #if __LINUX_ARM_ARCH__ >= 6 | 30 | #if __LINUX_ARM_ARCH__ >= 6 |
| 25 | 31 | ||
| 26 | /* | 32 | /* |
| 27 | * ARMv6 UP and SMP safe atomic ops. We use load exclusive and | 33 | * ARMv6 UP and SMP safe atomic ops. We use load exclusive and |
| 28 | * store exclusive to ensure that these are atomic. We may loop | 34 | * store exclusive to ensure that these are atomic. We may loop |
| 29 | * to ensure that the update happens. Writing to 'v->counter' | 35 | * to ensure that the update happens. |
| 30 | * without using the following operations WILL break the atomic | ||
| 31 | * nature of these ops. | ||
| 32 | */ | 36 | */ |
| 33 | static inline void atomic_set(atomic_t *v, int i) | ||
| 34 | { | ||
| 35 | unsigned long tmp; | ||
| 36 | |||
| 37 | __asm__ __volatile__("@ atomic_set\n" | ||
| 38 | "1: ldrex %0, [%1]\n" | ||
| 39 | " strex %0, %2, [%1]\n" | ||
| 40 | " teq %0, #0\n" | ||
| 41 | " bne 1b" | ||
| 42 | : "=&r" (tmp) | ||
| 43 | : "r" (&v->counter), "r" (i) | ||
| 44 | : "cc"); | ||
| 45 | } | ||
| 46 | |||
| 47 | static inline void atomic_add(int i, atomic_t *v) | 37 | static inline void atomic_add(int i, atomic_t *v) |
| 48 | { | 38 | { |
| 49 | unsigned long tmp; | 39 | unsigned long tmp; |
| @@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) | |||
| 163 | #error SMP not supported on pre-ARMv6 CPUs | 153 | #error SMP not supported on pre-ARMv6 CPUs |
| 164 | #endif | 154 | #endif |
| 165 | 155 | ||
| 166 | #define atomic_set(v,i) (((v)->counter) = (i)) | ||
| 167 | |||
| 168 | static inline int atomic_add_return(int i, atomic_t *v) | 156 | static inline int atomic_add_return(int i, atomic_t *v) |
| 169 | { | 157 | { |
| 170 | unsigned long flags; | 158 | unsigned long flags; |
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h index feaa75f0013e..66c160b8547f 100644 --- a/arch/arm/include/asm/cache.h +++ b/arch/arm/include/asm/cache.h | |||
| @@ -4,7 +4,7 @@ | |||
| 4 | #ifndef __ASMARM_CACHE_H | 4 | #ifndef __ASMARM_CACHE_H |
| 5 | #define __ASMARM_CACHE_H | 5 | #define __ASMARM_CACHE_H |
| 6 | 6 | ||
| 7 | #define L1_CACHE_SHIFT 5 | 7 | #define L1_CACHE_SHIFT CONFIG_ARM_L1_CACHE_SHIFT |
| 8 | #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) | 8 | #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) |
| 9 | 9 | ||
| 10 | /* | 10 | /* |
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index b3e656c6fb78..20ae96cc0020 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h | |||
| @@ -63,6 +63,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) | |||
| 63 | return read_cpuid(CPUID_CACHETYPE); | 63 | return read_cpuid(CPUID_CACHETYPE); |
| 64 | } | 64 | } |
| 65 | 65 | ||
| 66 | static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) | ||
| 67 | { | ||
| 68 | return read_cpuid(CPUID_TCM); | ||
| 69 | } | ||
| 70 | |||
| 66 | /* | 71 | /* |
| 67 | * Intel's XScale3 core supports some v6 features (supersections, L2) | 72 | * Intel's XScale3 core supports some v6 features (supersections, L2) |
| 68 | * but advertises itself as v5 as it does not support the v6 ISA. For | 73 | * but advertises itself as v5 as it does not support the v6 ISA. For |
| @@ -73,7 +78,10 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) | |||
| 73 | #else | 78 | #else |
| 74 | static inline int cpu_is_xsc3(void) | 79 | static inline int cpu_is_xsc3(void) |
| 75 | { | 80 | { |
| 76 | if ((read_cpuid_id() & 0xffffe000) == 0x69056000) | 81 | unsigned int id; |
| 82 | id = read_cpuid_id() & 0xffffe000; | ||
| 83 | /* It covers both Intel ID and Marvell ID */ | ||
| 84 | if ((id == 0x69056000) || (id == 0x56056000)) | ||
| 77 | return 1; | 85 | return 1; |
| 78 | 86 | ||
| 79 | return 0; | 87 | return 0; |
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h new file mode 100644 index 000000000000..5929ef5d927a --- /dev/null +++ b/arch/arm/include/asm/tcm.h | |||
| @@ -0,0 +1,31 @@ | |||
| 1 | /* | ||
| 2 | * | ||
| 3 | * Copyright (C) 2008-2009 ST-Ericsson AB | ||
| 4 | * License terms: GNU General Public License (GPL) version 2 | ||
| 5 | * | ||
| 6 | * Author: Rickard Andersson <rickard.andersson@stericsson.com> | ||
| 7 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 8 | * | ||
| 9 | */ | ||
| 10 | #ifndef __ASMARM_TCM_H | ||
| 11 | #define __ASMARM_TCM_H | ||
| 12 | |||
| 13 | #ifndef CONFIG_HAVE_TCM | ||
| 14 | #error "You should not be including tcm.h unless you have a TCM!" | ||
| 15 | #endif | ||
| 16 | |||
| 17 | #include <linux/compiler.h> | ||
| 18 | |||
| 19 | /* Tag variables with this */ | ||
| 20 | #define __tcmdata __section(.tcm.data) | ||
| 21 | /* Tag constants with this */ | ||
| 22 | #define __tcmconst __section(.tcm.rodata) | ||
| 23 | /* Tag functions inside TCM called from outside TCM with this */ | ||
| 24 | #define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline | ||
| 25 | /* Tag function inside TCM called from inside TCM with this */ | ||
| 26 | #define __tcmlocalfunc __section(.tcm.text) | ||
| 27 | |||
| 28 | void *tcm_alloc(size_t len); | ||
| 29 | void tcm_free(void *addr, size_t len); | ||
| 30 | |||
| 31 | #endif | ||
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index 073e85b9b961..bc631161e9c6 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h | |||
| @@ -35,7 +35,9 @@ | |||
| 35 | 35 | ||
| 36 | #define ARM(x...) | 36 | #define ARM(x...) |
| 37 | #define THUMB(x...) x | 37 | #define THUMB(x...) x |
| 38 | #ifdef __ASSEMBLY__ | ||
| 38 | #define W(instr) instr.w | 39 | #define W(instr) instr.w |
| 40 | #endif | ||
| 39 | #define BSYM(sym) sym + 1 | 41 | #define BSYM(sym) sym + 1 |
| 40 | 42 | ||
| 41 | #else /* !CONFIG_THUMB2_KERNEL */ | 43 | #else /* !CONFIG_THUMB2_KERNEL */ |
| @@ -45,7 +47,9 @@ | |||
| 45 | 47 | ||
| 46 | #define ARM(x...) x | 48 | #define ARM(x...) x |
| 47 | #define THUMB(x...) | 49 | #define THUMB(x...) |
| 50 | #ifdef __ASSEMBLY__ | ||
| 48 | #define W(instr) instr | 51 | #define W(instr) instr |
| 52 | #endif | ||
| 49 | #define BSYM(sym) sym | 53 | #define BSYM(sym) sym |
| 50 | 54 | ||
| 51 | #endif /* CONFIG_THUMB2_KERNEL */ | 55 | #endif /* CONFIG_THUMB2_KERNEL */ |
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index c446aeff7b89..79087dd6d869 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile | |||
| @@ -35,6 +35,7 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o | |||
| 35 | obj-$(CONFIG_ARM_THUMBEE) += thumbee.o | 35 | obj-$(CONFIG_ARM_THUMBEE) += thumbee.o |
| 36 | obj-$(CONFIG_KGDB) += kgdb.o | 36 | obj-$(CONFIG_KGDB) += kgdb.o |
| 37 | obj-$(CONFIG_ARM_UNWIND) += unwind.o | 37 | obj-$(CONFIG_ARM_UNWIND) += unwind.o |
| 38 | obj-$(CONFIG_HAVE_TCM) += tcm.o | ||
| 38 | 39 | ||
| 39 | obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o | 40 | obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o |
| 40 | AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 | 41 | AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 |
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3d727a8a23bc..0a2ba51cf35d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S | |||
| @@ -272,7 +272,15 @@ __und_svc: | |||
| 272 | @ | 272 | @ |
| 273 | @ r0 - instruction | 273 | @ r0 - instruction |
| 274 | @ | 274 | @ |
| 275 | #ifndef CONFIG_THUMB2_KERNEL | ||
| 275 | ldr r0, [r2, #-4] | 276 | ldr r0, [r2, #-4] |
| 277 | #else | ||
| 278 | ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2 | ||
| 279 | and r9, r0, #0xf800 | ||
| 280 | cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 | ||
| 281 | ldrhhs r9, [r2] @ bottom 16 bits | ||
| 282 | orrhs r0, r9, r0, lsl #16 | ||
| 283 | #endif | ||
| 276 | adr r9, BSYM(1f) | 284 | adr r9, BSYM(1f) |
| 277 | bl call_fpe | 285 | bl call_fpe |
| 278 | 286 | ||
| @@ -678,7 +686,9 @@ ENTRY(fp_enter) | |||
| 678 | .word no_fp | 686 | .word no_fp |
| 679 | .previous | 687 | .previous |
| 680 | 688 | ||
| 681 | no_fp: mov pc, lr | 689 | ENTRY(no_fp) |
| 690 | mov pc, lr | ||
| 691 | ENDPROC(no_fp) | ||
| 682 | 692 | ||
| 683 | __und_usr_unknown: | 693 | __und_usr_unknown: |
| 684 | enable_irq | 694 | enable_irq |
| @@ -734,13 +744,6 @@ ENTRY(__switch_to) | |||
| 734 | #ifdef CONFIG_MMU | 744 | #ifdef CONFIG_MMU |
| 735 | ldr r6, [r2, #TI_CPU_DOMAIN] | 745 | ldr r6, [r2, #TI_CPU_DOMAIN] |
| 736 | #endif | 746 | #endif |
| 737 | #if __LINUX_ARM_ARCH__ >= 6 | ||
| 738 | #ifdef CONFIG_CPU_32v6K | ||
| 739 | clrex | ||
| 740 | #else | ||
| 741 | strex r5, r4, [ip] @ Clear exclusive monitor | ||
| 742 | #endif | ||
| 743 | #endif | ||
| 744 | #if defined(CONFIG_HAS_TLS_REG) | 747 | #if defined(CONFIG_HAS_TLS_REG) |
| 745 | mcr p15, 0, r3, c13, c0, 3 @ set TLS register | 748 | mcr p15, 0, r3, c13, c0, 3 @ set TLS register |
| 746 | #elif !defined(CONFIG_TLS_REG_EMUL) | 749 | #elif !defined(CONFIG_TLS_REG_EMUL) |
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index a4eaf4f920c5..e17e3c30d957 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S | |||
| @@ -76,13 +76,25 @@ | |||
| 76 | #ifndef CONFIG_THUMB2_KERNEL | 76 | #ifndef CONFIG_THUMB2_KERNEL |
| 77 | .macro svc_exit, rpsr | 77 | .macro svc_exit, rpsr |
| 78 | msr spsr_cxsf, \rpsr | 78 | msr spsr_cxsf, \rpsr |
| 79 | #if defined(CONFIG_CPU_32v6K) | ||
| 80 | clrex @ clear the exclusive monitor | ||
| 79 | ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr | 81 | ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr |
| 82 | #elif defined (CONFIG_CPU_V6) | ||
| 83 | ldr r0, [sp] | ||
| 84 | strex r1, r2, [sp] @ clear the exclusive monitor | ||
| 85 | ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr | ||
| 86 | #endif | ||
| 80 | .endm | 87 | .endm |
| 81 | 88 | ||
| 82 | .macro restore_user_regs, fast = 0, offset = 0 | 89 | .macro restore_user_regs, fast = 0, offset = 0 |
| 83 | ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr | 90 | ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr |
| 84 | ldr lr, [sp, #\offset + S_PC]! @ get pc | 91 | ldr lr, [sp, #\offset + S_PC]! @ get pc |
| 85 | msr spsr_cxsf, r1 @ save in spsr_svc | 92 | msr spsr_cxsf, r1 @ save in spsr_svc |
| 93 | #if defined(CONFIG_CPU_32v6K) | ||
| 94 | clrex @ clear the exclusive monitor | ||
| 95 | #elif defined (CONFIG_CPU_V6) | ||
| 96 | strex r1, r2, [sp] @ clear the exclusive monitor | ||
| 97 | #endif | ||
| 86 | .if \fast | 98 | .if \fast |
| 87 | ldmdb sp, {r1 - lr}^ @ get calling r1 - lr | 99 | ldmdb sp, {r1 - lr}^ @ get calling r1 - lr |
| 88 | .else | 100 | .else |
| @@ -98,6 +110,7 @@ | |||
| 98 | .endm | 110 | .endm |
| 99 | #else /* CONFIG_THUMB2_KERNEL */ | 111 | #else /* CONFIG_THUMB2_KERNEL */ |
| 100 | .macro svc_exit, rpsr | 112 | .macro svc_exit, rpsr |
| 113 | clrex @ clear the exclusive monitor | ||
| 101 | ldr r0, [sp, #S_SP] @ top of the stack | 114 | ldr r0, [sp, #S_SP] @ top of the stack |
| 102 | ldr r1, [sp, #S_PC] @ return address | 115 | ldr r1, [sp, #S_PC] @ return address |
| 103 | tst r0, #4 @ orig stack 8-byte aligned? | 116 | tst r0, #4 @ orig stack 8-byte aligned? |
| @@ -110,6 +123,7 @@ | |||
| 110 | .endm | 123 | .endm |
| 111 | 124 | ||
| 112 | .macro restore_user_regs, fast = 0, offset = 0 | 125 | .macro restore_user_regs, fast = 0, offset = 0 |
| 126 | clrex @ clear the exclusive monitor | ||
| 113 | mov r2, sp | 127 | mov r2, sp |
| 114 | load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr | 128 | load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr |
| 115 | ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr | 129 | ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr |
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index f692efddd449..60c62c377fa9 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c | |||
| @@ -22,6 +22,7 @@ | |||
| 22 | #include <linux/kernel.h> | 22 | #include <linux/kernel.h> |
| 23 | #include <linux/kprobes.h> | 23 | #include <linux/kprobes.h> |
| 24 | #include <linux/module.h> | 24 | #include <linux/module.h> |
| 25 | #include <linux/stop_machine.h> | ||
| 25 | #include <linux/stringify.h> | 26 | #include <linux/stringify.h> |
| 26 | #include <asm/traps.h> | 27 | #include <asm/traps.h> |
| 27 | #include <asm/cacheflush.h> | 28 | #include <asm/cacheflush.h> |
| @@ -83,10 +84,24 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) | |||
| 83 | flush_insns(p->addr, 1); | 84 | flush_insns(p->addr, 1); |
| 84 | } | 85 | } |
| 85 | 86 | ||
| 87 | /* | ||
| 88 | * The actual disarming is done here on each CPU and synchronized using | ||
| 89 | * stop_machine. This synchronization is necessary on SMP to avoid removing | ||
| 90 | * a probe between the moment the 'Undefined Instruction' exception is raised | ||
| 91 | * and the moment the exception handler reads the faulting instruction from | ||
| 92 | * memory. | ||
| 93 | */ | ||
| 94 | int __kprobes __arch_disarm_kprobe(void *p) | ||
| 95 | { | ||
| 96 | struct kprobe *kp = p; | ||
| 97 | *kp->addr = kp->opcode; | ||
| 98 | flush_insns(kp->addr, 1); | ||
| 99 | return 0; | ||
| 100 | } | ||
| 101 | |||
| 86 | void __kprobes arch_disarm_kprobe(struct kprobe *p) | 102 | void __kprobes arch_disarm_kprobe(struct kprobe *p) |
| 87 | { | 103 | { |
| 88 | *p->addr = p->opcode; | 104 | stop_machine(__arch_disarm_kprobe, p, &cpu_online_map); |
| 89 | flush_insns(p->addr, 1); | ||
| 90 | } | 105 | } |
| 91 | 106 | ||
| 92 | void __kprobes arch_remove_kprobe(struct kprobe *p) | 107 | void __kprobes arch_remove_kprobe(struct kprobe *p) |
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d4d4f77c91b2..c6c57b640b6b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c | |||
| @@ -45,6 +45,7 @@ | |||
| 45 | 45 | ||
| 46 | #include "compat.h" | 46 | #include "compat.h" |
| 47 | #include "atags.h" | 47 | #include "atags.h" |
| 48 | #include "tcm.h" | ||
| 48 | 49 | ||
| 49 | #ifndef MEM_SIZE | 50 | #ifndef MEM_SIZE |
| 50 | #define MEM_SIZE (16*1024*1024) | 51 | #define MEM_SIZE (16*1024*1024) |
| @@ -749,6 +750,7 @@ void __init setup_arch(char **cmdline_p) | |||
| 749 | #endif | 750 | #endif |
| 750 | 751 | ||
| 751 | cpu_init(); | 752 | cpu_init(); |
| 753 | tcm_init(); | ||
| 752 | 754 | ||
| 753 | /* | 755 | /* |
| 754 | * Set up various architecture-specific pointers | 756 | * Set up various architecture-specific pointers |
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c new file mode 100644 index 000000000000..e50303868f1b --- /dev/null +++ b/arch/arm/kernel/tcm.c | |||
| @@ -0,0 +1,246 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) 2008-2009 ST-Ericsson AB | ||
| 3 | * License terms: GNU General Public License (GPL) version 2 | ||
| 4 | * TCM memory handling for ARM systems | ||
| 5 | * | ||
| 6 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 7 | * Author: Rickard Andersson <rickard.andersson@stericsson.com> | ||
| 8 | */ | ||
| 9 | #include <linux/init.h> | ||
| 10 | #include <linux/kernel.h> | ||
| 11 | #include <linux/module.h> | ||
| 12 | #include <linux/stddef.h> | ||
| 13 | #include <linux/ioport.h> | ||
| 14 | #include <linux/genalloc.h> | ||
| 15 | #include <linux/string.h> /* memcpy */ | ||
| 16 | #include <asm/page.h> /* PAGE_SHIFT */ | ||
| 17 | #include <asm/cputype.h> | ||
| 18 | #include <asm/mach/map.h> | ||
| 19 | #include <mach/memory.h> | ||
| 20 | #include "tcm.h" | ||
| 21 | |||
| 22 | /* Scream and warn about misuse */ | ||
| 23 | #if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \ | ||
| 24 | !defined(DTCM_OFFSET) || !defined(DTCM_END) | ||
| 25 | #error "TCM support selected but offsets not defined!" | ||
| 26 | #endif | ||
| 27 | |||
| 28 | static struct gen_pool *tcm_pool; | ||
| 29 | |||
| 30 | /* TCM section definitions from the linker */ | ||
| 31 | extern char __itcm_start, __sitcm_text, __eitcm_text; | ||
| 32 | extern char __dtcm_start, __sdtcm_data, __edtcm_data; | ||
| 33 | |||
| 34 | /* | ||
| 35 | * TCM memory resources | ||
| 36 | */ | ||
| 37 | static struct resource dtcm_res = { | ||
| 38 | .name = "DTCM RAM", | ||
| 39 | .start = DTCM_OFFSET, | ||
| 40 | .end = DTCM_END, | ||
| 41 | .flags = IORESOURCE_MEM | ||
| 42 | }; | ||
| 43 | |||
| 44 | static struct resource itcm_res = { | ||
| 45 | .name = "ITCM RAM", | ||
| 46 | .start = ITCM_OFFSET, | ||
| 47 | .end = ITCM_END, | ||
| 48 | .flags = IORESOURCE_MEM | ||
| 49 | }; | ||
| 50 | |||
| 51 | static struct map_desc dtcm_iomap[] __initdata = { | ||
| 52 | { | ||
| 53 | .virtual = DTCM_OFFSET, | ||
| 54 | .pfn = __phys_to_pfn(DTCM_OFFSET), | ||
| 55 | .length = (DTCM_END - DTCM_OFFSET + 1), | ||
| 56 | .type = MT_UNCACHED | ||
| 57 | } | ||
| 58 | }; | ||
| 59 | |||
| 60 | static struct map_desc itcm_iomap[] __initdata = { | ||
| 61 | { | ||
| 62 | .virtual = ITCM_OFFSET, | ||
| 63 | .pfn = __phys_to_pfn(ITCM_OFFSET), | ||
| 64 | .length = (ITCM_END - ITCM_OFFSET + 1), | ||
| 65 | .type = MT_UNCACHED | ||
| 66 | } | ||
| 67 | }; | ||
| 68 | |||
| 69 | /* | ||
| 70 | * Allocate a chunk of TCM memory | ||
| 71 | */ | ||
| 72 | void *tcm_alloc(size_t len) | ||
| 73 | { | ||
| 74 | unsigned long vaddr; | ||
| 75 | |||
| 76 | if (!tcm_pool) | ||
| 77 | return NULL; | ||
| 78 | |||
| 79 | vaddr = gen_pool_alloc(tcm_pool, len); | ||
| 80 | if (!vaddr) | ||
| 81 | return NULL; | ||
| 82 | |||
| 83 | return (void *) vaddr; | ||
| 84 | } | ||
| 85 | EXPORT_SYMBOL(tcm_alloc); | ||
| 86 | |||
| 87 | /* | ||
| 88 | * Free a chunk of TCM memory | ||
| 89 | */ | ||
| 90 | void tcm_free(void *addr, size_t len) | ||
| 91 | { | ||
| 92 | gen_pool_free(tcm_pool, (unsigned long) addr, len); | ||
| 93 | } | ||
| 94 | EXPORT_SYMBOL(tcm_free); | ||
| 95 | |||
| 96 | |||
| 97 | static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) | ||
| 98 | { | ||
| 99 | const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128, | ||
| 100 | 256, 512, 1024, -1, -1, -1, -1 }; | ||
| 101 | u32 tcm_region; | ||
| 102 | int tcm_size; | ||
| 103 | |||
| 104 | /* Read the special TCM region register c9, 0 */ | ||
| 105 | if (!type) | ||
| 106 | asm("mrc p15, 0, %0, c9, c1, 0" | ||
| 107 | : "=r" (tcm_region)); | ||
| 108 | else | ||
| 109 | asm("mrc p15, 0, %0, c9, c1, 1" | ||
| 110 | : "=r" (tcm_region)); | ||
| 111 | |||
| 112 | tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f]; | ||
| 113 | if (tcm_size < 0) { | ||
| 114 | pr_err("CPU: %sTCM of unknown size!\n", | ||
| 115 | type ? "I" : "D"); | ||
| 116 | } else { | ||
| 117 | pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n", | ||
| 118 | type ? "I" : "D", | ||
| 119 | tcm_size, | ||
| 120 | (tcm_region & 0xfffff000U), | ||
| 121 | (tcm_region & 1) ? "" : "not "); | ||
| 122 | } | ||
| 123 | |||
| 124 | if (tcm_size != expected_size) { | ||
| 125 | pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n", | ||
| 126 | type ? "I" : "D", | ||
| 127 | tcm_size, | ||
| 128 | expected_size); | ||
| 129 | /* Adjust to the expected size? what can we do... */ | ||
| 130 | } | ||
| 131 | |||
| 132 | /* Force move the TCM bank to where we want it, enable */ | ||
| 133 | tcm_region = offset | (tcm_region & 0x00000ffeU) | 1; | ||
| 134 | |||
| 135 | if (!type) | ||
| 136 | asm("mcr p15, 0, %0, c9, c1, 0" | ||
| 137 | : /* No output operands */ | ||
| 138 | : "r" (tcm_region)); | ||
| 139 | else | ||
| 140 | asm("mcr p15, 0, %0, c9, c1, 1" | ||
| 141 | : /* No output operands */ | ||
| 142 | : "r" (tcm_region)); | ||
| 143 | |||
| 144 | pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n", | ||
| 145 | type ? "I" : "D", | ||
| 146 | tcm_size, | ||
| 147 | (tcm_region & 0xfffff000U)); | ||
| 148 | } | ||
| 149 | |||
| 150 | /* | ||
| 151 | * This initializes the TCM memory | ||
| 152 | */ | ||
| 153 | void __init tcm_init(void) | ||
| 154 | { | ||
| 155 | u32 tcm_status = read_cpuid_tcmstatus(); | ||
| 156 | char *start; | ||
| 157 | char *end; | ||
| 158 | char *ram; | ||
| 159 | |||
| 160 | /* Setup DTCM if present */ | ||
| 161 | if (tcm_status & (1 << 16)) { | ||
| 162 | setup_tcm_bank(0, DTCM_OFFSET, | ||
| 163 | (DTCM_END - DTCM_OFFSET + 1) >> 10); | ||
| 164 | request_resource(&iomem_resource, &dtcm_res); | ||
| 165 | iotable_init(dtcm_iomap, 1); | ||
| 166 | /* Copy data from RAM to DTCM */ | ||
| 167 | start = &__sdtcm_data; | ||
| 168 | end = &__edtcm_data; | ||
| 169 | ram = &__dtcm_start; | ||
| 170 | memcpy(start, ram, (end-start)); | ||
| 171 | pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); | ||
| 172 | } | ||
| 173 | |||
| 174 | /* Setup ITCM if present */ | ||
| 175 | if (tcm_status & 1) { | ||
| 176 | setup_tcm_bank(1, ITCM_OFFSET, | ||
| 177 | (ITCM_END - ITCM_OFFSET + 1) >> 10); | ||
| 178 | request_resource(&iomem_resource, &itcm_res); | ||
| 179 | iotable_init(itcm_iomap, 1); | ||
| 180 | /* Copy code from RAM to ITCM */ | ||
| 181 | start = &__sitcm_text; | ||
| 182 | end = &__eitcm_text; | ||
| 183 | ram = &__itcm_start; | ||
| 184 | memcpy(start, ram, (end-start)); | ||
| 185 | pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); | ||
| 186 | } | ||
| 187 | } | ||
| 188 | |||
| 189 | /* | ||
| 190 | * This creates the TCM memory pool and has to be done later, | ||
| 191 | * during the core_initicalls, since the allocator is not yet | ||
| 192 | * up and running when the first initialization runs. | ||
| 193 | */ | ||
| 194 | static int __init setup_tcm_pool(void) | ||
| 195 | { | ||
| 196 | u32 tcm_status = read_cpuid_tcmstatus(); | ||
| 197 | u32 dtcm_pool_start = (u32) &__edtcm_data; | ||
| 198 | u32 itcm_pool_start = (u32) &__eitcm_text; | ||
| 199 | int ret; | ||
| 200 | |||
| 201 | /* | ||
| 202 | * Set up malloc pool, 2^2 = 4 bytes granularity since | ||
| 203 | * the TCM is sometimes just 4 KiB. NB: pages and cache | ||
| 204 | * line alignments does not matter in TCM! | ||
| 205 | */ | ||
| 206 | tcm_pool = gen_pool_create(2, -1); | ||
| 207 | |||
| 208 | pr_debug("Setting up TCM memory pool\n"); | ||
| 209 | |||
| 210 | /* Add the rest of DTCM to the TCM pool */ | ||
| 211 | if (tcm_status & (1 << 16)) { | ||
| 212 | if (dtcm_pool_start < DTCM_END) { | ||
| 213 | ret = gen_pool_add(tcm_pool, dtcm_pool_start, | ||
| 214 | DTCM_END - dtcm_pool_start + 1, -1); | ||
| 215 | if (ret) { | ||
| 216 | pr_err("CPU DTCM: could not add DTCM " \ | ||
| 217 | "remainder to pool!\n"); | ||
| 218 | return ret; | ||
| 219 | } | ||
| 220 | pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \ | ||
| 221 | "the TCM memory pool\n", | ||
| 222 | DTCM_END - dtcm_pool_start + 1, | ||
| 223 | dtcm_pool_start); | ||
| 224 | } | ||
| 225 | } | ||
| 226 | |||
| 227 | /* Add the rest of ITCM to the TCM pool */ | ||
| 228 | if (tcm_status & 1) { | ||
| 229 | if (itcm_pool_start < ITCM_END) { | ||
| 230 | ret = gen_pool_add(tcm_pool, itcm_pool_start, | ||
| 231 | ITCM_END - itcm_pool_start + 1, -1); | ||
| 232 | if (ret) { | ||
| 233 | pr_err("CPU ITCM: could not add ITCM " \ | ||
| 234 | "remainder to pool!\n"); | ||
| 235 | return ret; | ||
| 236 | } | ||
| 237 | pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \ | ||
| 238 | "the TCM memory pool\n", | ||
| 239 | ITCM_END - itcm_pool_start + 1, | ||
| 240 | itcm_pool_start); | ||
| 241 | } | ||
| 242 | } | ||
| 243 | return 0; | ||
| 244 | } | ||
| 245 | |||
| 246 | core_initcall(setup_tcm_pool); | ||
diff --git a/arch/arm/kernel/tcm.h b/arch/arm/kernel/tcm.h new file mode 100644 index 000000000000..8015ad434a40 --- /dev/null +++ b/arch/arm/kernel/tcm.h | |||
| @@ -0,0 +1,17 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) 2008-2009 ST-Ericsson AB | ||
| 3 | * License terms: GNU General Public License (GPL) version 2 | ||
| 4 | * TCM memory handling for ARM systems | ||
| 5 | * | ||
| 6 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 7 | * Author: Rickard Andersson <rickard.andersson@stericsson.com> | ||
| 8 | */ | ||
| 9 | |||
| 10 | #ifdef CONFIG_HAVE_TCM | ||
| 11 | void __init tcm_init(void); | ||
| 12 | #else | ||
| 13 | /* No TCM support, just blank inlines to be optimized out */ | ||
| 14 | inline void tcm_init(void) | ||
| 15 | { | ||
| 16 | } | ||
| 17 | #endif | ||
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 5cc4812c9763..aecf87dfbaec 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S | |||
| @@ -199,6 +199,63 @@ SECTIONS | |||
| 199 | } | 199 | } |
| 200 | _edata_loc = __data_loc + SIZEOF(.data); | 200 | _edata_loc = __data_loc + SIZEOF(.data); |
| 201 | 201 | ||
| 202 | #ifdef CONFIG_HAVE_TCM | ||
| 203 | /* | ||
| 204 | * We align everything to a page boundary so we can | ||
| 205 | * free it after init has commenced and TCM contents have | ||
| 206 | * been copied to its destination. | ||
| 207 | */ | ||
| 208 | .tcm_start : { | ||
| 209 | . = ALIGN(PAGE_SIZE); | ||
| 210 | __tcm_start = .; | ||
| 211 | __itcm_start = .; | ||
| 212 | } | ||
| 213 | |||
| 214 | /* | ||
| 215 | * Link these to the ITCM RAM | ||
| 216 | * Put VMA to the TCM address and LMA to the common RAM | ||
| 217 | * and we'll upload the contents from RAM to TCM and free | ||
| 218 | * the used RAM after that. | ||
| 219 | */ | ||
| 220 | .text_itcm ITCM_OFFSET : AT(__itcm_start) | ||
| 221 | { | ||
| 222 | __sitcm_text = .; | ||
| 223 | *(.tcm.text) | ||
| 224 | *(.tcm.rodata) | ||
| 225 | . = ALIGN(4); | ||
| 226 | __eitcm_text = .; | ||
| 227 | } | ||
| 228 | |||
| 229 | /* | ||
| 230 | * Reset the dot pointer, this is needed to create the | ||
| 231 | * relative __dtcm_start below (to be used as extern in code). | ||
| 232 | */ | ||
| 233 | . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm); | ||
| 234 | |||
| 235 | .dtcm_start : { | ||
| 236 | __dtcm_start = .; | ||
| 237 | } | ||
| 238 | |||
| 239 | /* TODO: add remainder of ITCM as well, that can be used for data! */ | ||
| 240 | .data_dtcm DTCM_OFFSET : AT(__dtcm_start) | ||
| 241 | { | ||
| 242 | . = ALIGN(4); | ||
| 243 | __sdtcm_data = .; | ||
| 244 | *(.tcm.data) | ||
| 245 | . = ALIGN(4); | ||
| 246 | __edtcm_data = .; | ||
| 247 | } | ||
| 248 | |||
| 249 | /* Reset the dot pointer or the linker gets confused */ | ||
| 250 | . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm); | ||
| 251 | |||
| 252 | /* End marker for freeing TCM copy in linked object */ | ||
| 253 | .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){ | ||
| 254 | . = ALIGN(PAGE_SIZE); | ||
| 255 | __tcm_end = .; | ||
| 256 | } | ||
| 257 | #endif | ||
| 258 | |||
| 202 | .bss : { | 259 | .bss : { |
| 203 | __bss_start = .; /* BSS */ | 260 | __bss_start = .; /* BSS */ |
| 204 | *(.bss) | 261 | *(.bss) |
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S index 6ae04db1ca4f..6ee2f6706f86 100644 --- a/arch/arm/lib/copy_page.S +++ b/arch/arm/lib/copy_page.S | |||
| @@ -12,8 +12,9 @@ | |||
| 12 | #include <linux/linkage.h> | 12 | #include <linux/linkage.h> |
| 13 | #include <asm/assembler.h> | 13 | #include <asm/assembler.h> |
| 14 | #include <asm/asm-offsets.h> | 14 | #include <asm/asm-offsets.h> |
| 15 | #include <asm/cache.h> | ||
| 15 | 16 | ||
| 16 | #define COPY_COUNT (PAGE_SZ/64 PLD( -1 )) | 17 | #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 )) |
| 17 | 18 | ||
| 18 | .text | 19 | .text |
| 19 | .align 5 | 20 | .align 5 |
| @@ -26,17 +27,16 @@ | |||
| 26 | ENTRY(copy_page) | 27 | ENTRY(copy_page) |
| 27 | stmfd sp!, {r4, lr} @ 2 | 28 | stmfd sp!, {r4, lr} @ 2 |
| 28 | PLD( pld [r1, #0] ) | 29 | PLD( pld [r1, #0] ) |
| 29 | PLD( pld [r1, #32] ) | 30 | PLD( pld [r1, #L1_CACHE_BYTES] ) |
| 30 | mov r2, #COPY_COUNT @ 1 | 31 | mov r2, #COPY_COUNT @ 1 |
| 31 | ldmia r1!, {r3, r4, ip, lr} @ 4+1 | 32 | ldmia r1!, {r3, r4, ip, lr} @ 4+1 |
| 32 | 1: PLD( pld [r1, #64] ) | 33 | 1: PLD( pld [r1, #2 * L1_CACHE_BYTES]) |
| 33 | PLD( pld [r1, #96] ) | 34 | PLD( pld [r1, #3 * L1_CACHE_BYTES]) |
| 34 | 2: stmia r0!, {r3, r4, ip, lr} @ 4 | 35 | 2: |
| 35 | ldmia r1!, {r3, r4, ip, lr} @ 4+1 | 36 | .rept (2 * L1_CACHE_BYTES / 16 - 1) |
| 36 | stmia r0!, {r3, r4, ip, lr} @ 4 | ||
| 37 | ldmia r1!, {r3, r4, ip, lr} @ 4+1 | ||
| 38 | stmia r0!, {r3, r4, ip, lr} @ 4 | 37 | stmia r0!, {r3, r4, ip, lr} @ 4 |
| 39 | ldmia r1!, {r3, r4, ip, lr} @ 4 | 38 | ldmia r1!, {r3, r4, ip, lr} @ 4 |
| 39 | .endr | ||
| 40 | subs r2, r2, #1 @ 1 | 40 | subs r2, r2, #1 @ 1 |
| 41 | stmia r0!, {r3, r4, ip, lr} @ 4 | 41 | stmia r0!, {r3, r4, ip, lr} @ 4 |
| 42 | ldmgtia r1!, {r3, r4, ip, lr} @ 4 | 42 | ldmgtia r1!, {r3, r4, ip, lr} @ 4 |
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 412aa49ad2fb..d1f775e86353 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c | |||
| @@ -771,9 +771,9 @@ void __init at91_add_device_pwm(u32 mask) {} | |||
| 771 | * AC97 | 771 | * AC97 |
| 772 | * -------------------------------------------------------------------- */ | 772 | * -------------------------------------------------------------------- */ |
| 773 | 773 | ||
| 774 | #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) | 774 | #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) |
| 775 | static u64 ac97_dmamask = DMA_BIT_MASK(32); | 775 | static u64 ac97_dmamask = DMA_BIT_MASK(32); |
| 776 | static struct atmel_ac97_data ac97_data; | 776 | static struct ac97c_platform_data ac97_data; |
| 777 | 777 | ||
| 778 | static struct resource ac97_resources[] = { | 778 | static struct resource ac97_resources[] = { |
| 779 | [0] = { | 779 | [0] = { |
| @@ -789,7 +789,7 @@ static struct resource ac97_resources[] = { | |||
| 789 | }; | 789 | }; |
| 790 | 790 | ||
| 791 | static struct platform_device at91cap9_ac97_device = { | 791 | static struct platform_device at91cap9_ac97_device = { |
| 792 | .name = "ac97c", | 792 | .name = "atmel_ac97c", |
| 793 | .id = 1, | 793 | .id = 1, |
| 794 | .dev = { | 794 | .dev = { |
| 795 | .dma_mask = &ac97_dmamask, | 795 | .dma_mask = &ac97_dmamask, |
| @@ -800,7 +800,7 @@ static struct platform_device at91cap9_ac97_device = { | |||
| 800 | .num_resources = ARRAY_SIZE(ac97_resources), | 800 | .num_resources = ARRAY_SIZE(ac97_resources), |
| 801 | }; | 801 | }; |
| 802 | 802 | ||
| 803 | void __init at91_add_device_ac97(struct atmel_ac97_data *data) | 803 | void __init at91_add_device_ac97(struct ac97c_platform_data *data) |
| 804 | { | 804 | { |
| 805 | if (!data) | 805 | if (!data) |
| 806 | return; | 806 | return; |
| @@ -818,7 +818,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) | |||
| 818 | platform_device_register(&at91cap9_ac97_device); | 818 | platform_device_register(&at91cap9_ac97_device); |
| 819 | } | 819 | } |
| 820 | #else | 820 | #else |
| 821 | void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} | 821 | void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} |
| 822 | #endif | 822 | #endif |
| 823 | 823 | ||
| 824 | 824 | ||
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index d746e8621bc2..d581cff80c4c 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c | |||
| @@ -24,11 +24,59 @@ | |||
| 24 | #include <mach/at91sam9g45.h> | 24 | #include <mach/at91sam9g45.h> |
| 25 | #include <mach/at91sam9g45_matrix.h> | 25 | #include <mach/at91sam9g45_matrix.h> |
| 26 | #include <mach/at91sam9_smc.h> | 26 | #include <mach/at91sam9_smc.h> |
| 27 | #include <mach/at_hdmac.h> | ||
| 27 | 28 | ||
| 28 | #include "generic.h" | 29 | #include "generic.h" |
| 29 | 30 | ||
| 30 | 31 | ||
| 31 | /* -------------------------------------------------------------------- | 32 | /* -------------------------------------------------------------------- |
| 33 | * HDMAC - AHB DMA Controller | ||
| 34 | * -------------------------------------------------------------------- */ | ||
| 35 | |||
| 36 | #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) | ||
| 37 | static u64 hdmac_dmamask = DMA_BIT_MASK(32); | ||
| 38 | |||
| 39 | static struct at_dma_platform_data atdma_pdata = { | ||
| 40 | .nr_channels = 8, | ||
| 41 | }; | ||
| 42 | |||
| 43 | static struct resource hdmac_resources[] = { | ||
| 44 | [0] = { | ||
| 45 | .start = AT91_BASE_SYS + AT91_DMA, | ||
| 46 | .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1, | ||
| 47 | .flags = IORESOURCE_MEM, | ||
| 48 | }, | ||
| 49 | [2] = { | ||
| 50 | .start = AT91SAM9G45_ID_DMA, | ||
| 51 | .end = AT91SAM9G45_ID_DMA, | ||
| 52 | .flags = IORESOURCE_IRQ, | ||
| 53 | }, | ||
| 54 | }; | ||
| 55 | |||
| 56 | static struct platform_device at_hdmac_device = { | ||
| 57 | .name = "at_hdmac", | ||
| 58 | .id = -1, | ||
| 59 | .dev = { | ||
| 60 | .dma_mask = &hdmac_dmamask, | ||
| 61 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
| 62 | .platform_data = &atdma_pdata, | ||
| 63 | }, | ||
| 64 | .resource = hdmac_resources, | ||
| 65 | .num_resources = ARRAY_SIZE(hdmac_resources), | ||
| 66 | }; | ||
| 67 | |||
| 68 | void __init at91_add_device_hdmac(void) | ||
| 69 | { | ||
| 70 | dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); | ||
| 71 | dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); | ||
| 72 | platform_device_register(&at_hdmac_device); | ||
| 73 | } | ||
| 74 | #else | ||
| 75 | void __init at91_add_device_hdmac(void) {} | ||
| 76 | #endif | ||
| 77 | |||
| 78 | |||
| 79 | /* -------------------------------------------------------------------- | ||
| 32 | * USB Host (OHCI) | 80 | * USB Host (OHCI) |
| 33 | * -------------------------------------------------------------------- */ | 81 | * -------------------------------------------------------------------- */ |
| 34 | 82 | ||
| @@ -550,6 +598,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) | |||
| 550 | 598 | ||
| 551 | 599 | ||
| 552 | /* -------------------------------------------------------------------- | 600 | /* -------------------------------------------------------------------- |
| 601 | * AC97 | ||
| 602 | * -------------------------------------------------------------------- */ | ||
| 603 | |||
| 604 | #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) | ||
| 605 | static u64 ac97_dmamask = DMA_BIT_MASK(32); | ||
| 606 | static struct ac97c_platform_data ac97_data; | ||
| 607 | |||
| 608 | static struct resource ac97_resources[] = { | ||
| 609 | [0] = { | ||
| 610 | .start = AT91SAM9G45_BASE_AC97C, | ||
| 611 | .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1, | ||
| 612 | .flags = IORESOURCE_MEM, | ||
| 613 | }, | ||
| 614 | [1] = { | ||
| 615 | .start = AT91SAM9G45_ID_AC97C, | ||
| 616 | .end = AT91SAM9G45_ID_AC97C, | ||
| 617 | .flags = IORESOURCE_IRQ, | ||
| 618 | }, | ||
| 619 | }; | ||
| 620 | |||
| 621 | static struct platform_device at91sam9g45_ac97_device = { | ||
| 622 | .name = "atmel_ac97c", | ||
| 623 | .id = 0, | ||
| 624 | .dev = { | ||
| 625 | .dma_mask = &ac97_dmamask, | ||
| 626 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
| 627 | .platform_data = &ac97_data, | ||
| 628 | }, | ||
| 629 | .resource = ac97_resources, | ||
| 630 | .num_resources = ARRAY_SIZE(ac97_resources), | ||
| 631 | }; | ||
| 632 | |||
| 633 | void __init at91_add_device_ac97(struct ac97c_platform_data *data) | ||
| 634 | { | ||
| 635 | if (!data) | ||
| 636 | return; | ||
| 637 | |||
| 638 | at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */ | ||
| 639 | at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */ | ||
| 640 | at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */ | ||
| 641 | at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */ | ||
| 642 | |||
| 643 | /* reset */ | ||
| 644 | if (data->reset_pin) | ||
| 645 | at91_set_gpio_output(data->reset_pin, 0); | ||
| 646 | |||
| 647 | ac97_data = *data; | ||
| 648 | platform_device_register(&at91sam9g45_ac97_device); | ||
| 649 | } | ||
| 650 | #else | ||
| 651 | void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} | ||
| 652 | #endif | ||
| 653 | |||
| 654 | |||
| 655 | /* -------------------------------------------------------------------- | ||
| 553 | * LCD Controller | 656 | * LCD Controller |
| 554 | * -------------------------------------------------------------------- */ | 657 | * -------------------------------------------------------------------- */ |
| 555 | 658 | ||
| @@ -1220,6 +1323,7 @@ void __init at91_add_device_serial(void) {} | |||
| 1220 | */ | 1323 | */ |
| 1221 | static int __init at91_add_standard_devices(void) | 1324 | static int __init at91_add_standard_devices(void) |
| 1222 | { | 1325 | { |
| 1326 | at91_add_device_hdmac(); | ||
| 1223 | at91_add_device_rtc(); | 1327 | at91_add_device_rtc(); |
| 1224 | at91_add_device_rtt(); | 1328 | at91_add_device_rtt(); |
| 1225 | at91_add_device_watchdog(); | 1329 | at91_add_device_watchdog(); |
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 728186515cdf..d345f5453dbe 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c | |||
| @@ -21,11 +21,57 @@ | |||
| 21 | #include <mach/at91sam9rl.h> | 21 | #include <mach/at91sam9rl.h> |
| 22 | #include <mach/at91sam9rl_matrix.h> | 22 | #include <mach/at91sam9rl_matrix.h> |
| 23 | #include <mach/at91sam9_smc.h> | 23 | #include <mach/at91sam9_smc.h> |
| 24 | #include <mach/at_hdmac.h> | ||
| 24 | 25 | ||
| 25 | #include "generic.h" | 26 | #include "generic.h" |
| 26 | 27 | ||
| 27 | 28 | ||
| 28 | /* -------------------------------------------------------------------- | 29 | /* -------------------------------------------------------------------- |
| 30 | * HDMAC - AHB DMA Controller | ||
| 31 | * -------------------------------------------------------------------- */ | ||
| 32 | |||
| 33 | #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) | ||
| 34 | static u64 hdmac_dmamask = DMA_BIT_MASK(32); | ||
| 35 | |||
| 36 | static struct at_dma_platform_data atdma_pdata = { | ||
| 37 | .nr_channels = 2, | ||
| 38 | }; | ||
| 39 | |||
| 40 | static struct resource hdmac_resources[] = { | ||
| 41 | [0] = { | ||
| 42 | .start = AT91_BASE_SYS + AT91_DMA, | ||
| 43 | .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1, | ||
| 44 | .flags = IORESOURCE_MEM, | ||
| 45 | }, | ||
| 46 | [2] = { | ||
| 47 | .start = AT91SAM9RL_ID_DMA, | ||
| 48 | .end = AT91SAM9RL_ID_DMA, | ||
| 49 | .flags = IORESOURCE_IRQ, | ||
| 50 | }, | ||
| 51 | }; | ||
| 52 | |||
| 53 | static struct platform_device at_hdmac_device = { | ||
| 54 | .name = "at_hdmac", | ||
| 55 | .id = -1, | ||
| 56 | .dev = { | ||
| 57 | .dma_mask = &hdmac_dmamask, | ||
| 58 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
| 59 | .platform_data = &atdma_pdata, | ||
| 60 | }, | ||
| 61 | .resource = hdmac_resources, | ||
| 62 | .num_resources = ARRAY_SIZE(hdmac_resources), | ||
| 63 | }; | ||
| 64 | |||
| 65 | void __init at91_add_device_hdmac(void) | ||
| 66 | { | ||
| 67 | dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); | ||
| 68 | platform_device_register(&at_hdmac_device); | ||
| 69 | } | ||
| 70 | #else | ||
| 71 | void __init at91_add_device_hdmac(void) {} | ||
| 72 | #endif | ||
| 73 | |||
| 74 | /* -------------------------------------------------------------------- | ||
| 29 | * USB HS Device (Gadget) | 75 | * USB HS Device (Gadget) |
| 30 | * -------------------------------------------------------------------- */ | 76 | * -------------------------------------------------------------------- */ |
| 31 | 77 | ||
| @@ -398,6 +444,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) | |||
| 398 | 444 | ||
| 399 | 445 | ||
| 400 | /* -------------------------------------------------------------------- | 446 | /* -------------------------------------------------------------------- |
| 447 | * AC97 | ||
| 448 | * -------------------------------------------------------------------- */ | ||
| 449 | |||
| 450 | #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) | ||
| 451 | static u64 ac97_dmamask = DMA_BIT_MASK(32); | ||
| 452 | static struct ac97c_platform_data ac97_data; | ||
| 453 | |||
| 454 | static struct resource ac97_resources[] = { | ||
| 455 | [0] = { | ||
| 456 | .start = AT91SAM9RL_BASE_AC97C, | ||
| 457 | .end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1, | ||
| 458 | .flags = IORESOURCE_MEM, | ||
| 459 | }, | ||
| 460 | [1] = { | ||
| 461 | .start = AT91SAM9RL_ID_AC97C, | ||
| 462 | .end = AT91SAM9RL_ID_AC97C, | ||
| 463 | .flags = IORESOURCE_IRQ, | ||
| 464 | }, | ||
| 465 | }; | ||
| 466 | |||
| 467 | static struct platform_device at91sam9rl_ac97_device = { | ||
| 468 | .name = "atmel_ac97c", | ||
| 469 | .id = 0, | ||
| 470 | .dev = { | ||
| 471 | .dma_mask = &ac97_dmamask, | ||
| 472 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
| 473 | .platform_data = &ac97_data, | ||
| 474 | }, | ||
| 475 | .resource = ac97_resources, | ||
| 476 | .num_resources = ARRAY_SIZE(ac97_resources), | ||
| 477 | }; | ||
| 478 | |||
| 479 | void __init at91_add_device_ac97(struct ac97c_platform_data *data) | ||
| 480 | { | ||
| 481 | if (!data) | ||
| 482 | return; | ||
| 483 | |||
| 484 | at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */ | ||
| 485 | at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */ | ||
| 486 | at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */ | ||
| 487 | at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */ | ||
| 488 | |||
| 489 | /* reset */ | ||
| 490 | if (data->reset_pin) | ||
| 491 | at91_set_gpio_output(data->reset_pin, 0); | ||
| 492 | |||
| 493 | ac97_data = *data; | ||
| 494 | platform_device_register(&at91sam9rl_ac97_device); | ||
| 495 | } | ||
| 496 | #else | ||
| 497 | void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} | ||
| 498 | #endif | ||
| 499 | |||
| 500 | |||
| 501 | /* -------------------------------------------------------------------- | ||
| 401 | * LCD Controller | 502 | * LCD Controller |
| 402 | * -------------------------------------------------------------------- */ | 503 | * -------------------------------------------------------------------- */ |
| 403 | 504 | ||
| @@ -1103,6 +1204,7 @@ void __init at91_add_device_serial(void) {} | |||
| 1103 | */ | 1204 | */ |
| 1104 | static int __init at91_add_standard_devices(void) | 1205 | static int __init at91_add_standard_devices(void) |
| 1105 | { | 1206 | { |
| 1207 | at91_add_device_hdmac(); | ||
| 1106 | at91_add_device_rtc(); | 1208 | at91_add_device_rtc(); |
| 1107 | at91_add_device_rtt(); | 1209 | at91_add_device_rtt(); |
| 1108 | at91_add_device_watchdog(); | 1210 | at91_add_device_watchdog(); |
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 83a1a0fef47b..d6940870e403 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c | |||
| @@ -364,7 +364,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; | |||
| 364 | /* | 364 | /* |
| 365 | * AC97 | 365 | * AC97 |
| 366 | */ | 366 | */ |
| 367 | static struct atmel_ac97_data cap9adk_ac97_data = { | 367 | static struct ac97c_platform_data cap9adk_ac97_data = { |
| 368 | // .reset_pin = ... not connected | 368 | // .reset_pin = ... not connected |
| 369 | }; | 369 | }; |
| 370 | 370 | ||
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 8c0b71c95be4..7c1e382330fb 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c | |||
| @@ -340,7 +340,7 @@ static void __init neocore926_add_device_buttons(void) {} | |||
| 340 | /* | 340 | /* |
| 341 | * AC97 | 341 | * AC97 |
| 342 | */ | 342 | */ |
| 343 | static struct atmel_ac97_data neocore926_ac97_data = { | 343 | static struct ac97c_platform_data neocore926_ac97_data = { |
| 344 | .reset_pin = AT91_PIN_PA13, | 344 | .reset_pin = AT91_PIN_PA13, |
| 345 | }; | 345 | }; |
| 346 | 346 | ||
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index b8558eae5229..64c3843f323d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c | |||
| @@ -311,6 +311,14 @@ static void __init ek_add_device_buttons(void) {} | |||
| 311 | 311 | ||
| 312 | 312 | ||
| 313 | /* | 313 | /* |
| 314 | * AC97 | ||
| 315 | * reset_pin is not connected: NRST | ||
| 316 | */ | ||
| 317 | static struct ac97c_platform_data ek_ac97_data = { | ||
| 318 | }; | ||
| 319 | |||
| 320 | |||
| 321 | /* | ||
| 314 | * LEDs ... these could all be PWM-driven, for variable brightness | 322 | * LEDs ... these could all be PWM-driven, for variable brightness |
| 315 | */ | 323 | */ |
| 316 | static struct gpio_led ek_leds[] = { | 324 | static struct gpio_led ek_leds[] = { |
| @@ -372,6 +380,8 @@ static void __init ek_board_init(void) | |||
| 372 | at91_add_device_lcdc(&ek_lcdc_data); | 380 | at91_add_device_lcdc(&ek_lcdc_data); |
| 373 | /* Push Buttons */ | 381 | /* Push Buttons */ |
| 374 | ek_add_device_buttons(); | 382 | ek_add_device_buttons(); |
| 383 | /* AC97 */ | ||
| 384 | at91_add_device_ac97(&ek_ac97_data); | ||
| 375 | /* LEDs */ | 385 | /* LEDs */ |
| 376 | at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); | 386 | at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); |
| 377 | at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); | 387 | at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); |
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 94ffb5c103b9..bd28e989e54e 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c | |||
| @@ -211,6 +211,14 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; | |||
| 211 | 211 | ||
| 212 | 212 | ||
| 213 | /* | 213 | /* |
| 214 | * AC97 | ||
| 215 | * reset_pin is not connected: NRST | ||
| 216 | */ | ||
| 217 | static struct ac97c_platform_data ek_ac97_data = { | ||
| 218 | }; | ||
| 219 | |||
| 220 | |||
| 221 | /* | ||
| 214 | * LEDs | 222 | * LEDs |
| 215 | */ | 223 | */ |
| 216 | static struct gpio_led ek_leds[] = { | 224 | static struct gpio_led ek_leds[] = { |
| @@ -299,6 +307,8 @@ static void __init ek_board_init(void) | |||
| 299 | at91_add_device_mmc(0, &ek_mmc_data); | 307 | at91_add_device_mmc(0, &ek_mmc_data); |
| 300 | /* LCD Controller */ | 308 | /* LCD Controller */ |
| 301 | at91_add_device_lcdc(&ek_lcdc_data); | 309 | at91_add_device_lcdc(&ek_lcdc_data); |
| 310 | /* AC97 */ | ||
| 311 | at91_add_device_ac97(&ek_ac97_data); | ||
| 302 | /* Touch Screen Controller */ | 312 | /* Touch Screen Controller */ |
| 303 | at91_add_device_tsadcc(); | 313 | at91_add_device_tsadcc(); |
| 304 | /* LEDs */ | 314 | /* LEDs */ |
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 2a318eba1b07..3f35293d457a 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c | |||
| @@ -19,6 +19,7 @@ | |||
| 19 | #include <linux/amba/bus.h> | 19 | #include <linux/amba/bus.h> |
| 20 | #include <linux/amba/kmi.h> | 20 | #include <linux/amba/kmi.h> |
| 21 | #include <linux/amba/clcd.h> | 21 | #include <linux/amba/clcd.h> |
| 22 | #include <linux/amba/mmci.h> | ||
| 22 | #include <linux/io.h> | 23 | #include <linux/io.h> |
| 23 | 24 | ||
| 24 | #include <asm/clkdev.h> | 25 | #include <asm/clkdev.h> |
| @@ -35,7 +36,6 @@ | |||
| 35 | #include <asm/mach/arch.h> | 36 | #include <asm/mach/arch.h> |
| 36 | #include <asm/mach/flash.h> | 37 | #include <asm/mach/flash.h> |
| 37 | #include <asm/mach/irq.h> | 38 | #include <asm/mach/irq.h> |
| 38 | #include <asm/mach/mmc.h> | ||
| 39 | #include <asm/mach/map.h> | 39 | #include <asm/mach/map.h> |
| 40 | #include <asm/mach/time.h> | 40 | #include <asm/mach/time.h> |
| 41 | 41 | ||
| @@ -400,7 +400,7 @@ static unsigned int mmc_status(struct device *dev) | |||
| 400 | return status & 8; | 400 | return status & 8; |
| 401 | } | 401 | } |
| 402 | 402 | ||
| 403 | static struct mmc_platform_data mmc_data = { | 403 | static struct mmci_platform_data mmc_data = { |
| 404 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 404 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 405 | .status = mmc_status, | 405 | .status = mmc_status, |
| 406 | .gpio_wp = -1, | 406 | .gpio_wp = -1, |
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 89c992b8f75b..a6f8eab14ba5 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig | |||
| @@ -21,6 +21,11 @@ config CPU_PXA930 | |||
| 21 | 21 | ||
| 22 | config CPU_PXA935 | 22 | config CPU_PXA935 |
| 23 | bool "PXA935 (codename Tavor-P65)" | 23 | bool "PXA935 (codename Tavor-P65)" |
| 24 | select CPU_PXA930 | ||
| 25 | |||
| 26 | config CPU_PXA950 | ||
| 27 | bool "PXA950 (codename Tavor-PV2)" | ||
| 28 | select CPU_PXA930 | ||
| 24 | 29 | ||
| 25 | endmenu | 30 | endmenu |
| 26 | 31 | ||
| @@ -79,6 +84,12 @@ config MACH_MP900C | |||
| 79 | bool "Nec Mobilepro 900/c" | 84 | bool "Nec Mobilepro 900/c" |
| 80 | select PXA25x | 85 | select PXA25x |
| 81 | 86 | ||
| 87 | config MACH_BALLOON3 | ||
| 88 | bool "Balloon 3 board" | ||
| 89 | select PXA27x | ||
| 90 | select IWMMXT | ||
| 91 | select PXA_HAVE_BOARD_IRQS | ||
| 92 | |||
| 82 | config ARCH_PXA_IDP | 93 | config ARCH_PXA_IDP |
| 83 | bool "Accelent Xscale IDP" | 94 | bool "Accelent Xscale IDP" |
| 84 | select PXA25x | 95 | select PXA25x |
| @@ -371,6 +382,15 @@ config MACH_PALMTE2 | |||
| 371 | Say Y here if you intend to run this kernel on a Palm Tungsten|E2 | 382 | Say Y here if you intend to run this kernel on a Palm Tungsten|E2 |
| 372 | handheld computer. | 383 | handheld computer. |
| 373 | 384 | ||
| 385 | config MACH_PALMTC | ||
| 386 | bool "Palm Tungsten|C" | ||
| 387 | default y | ||
| 388 | depends on ARCH_PXA_PALM | ||
| 389 | select PXA25x | ||
| 390 | help | ||
| 391 | Say Y here if you intend to run this kernel on a Palm Tungsten|C | ||
| 392 | handheld computer. | ||
| 393 | |||
| 374 | config MACH_PALMT5 | 394 | config MACH_PALMT5 |
| 375 | bool "Palm Tungsten|T5" | 395 | bool "Palm Tungsten|T5" |
| 376 | default y | 396 | default y |
| @@ -458,6 +478,7 @@ config PXA_EZX | |||
| 458 | select PXA27x | 478 | select PXA27x |
| 459 | select IWMMXT | 479 | select IWMMXT |
| 460 | select HAVE_PWM | 480 | select HAVE_PWM |
| 481 | select PXA_HAVE_BOARD_IRQS | ||
| 461 | 482 | ||
| 462 | config MACH_EZX_A780 | 483 | config MACH_EZX_A780 |
| 463 | bool "Motorola EZX A780" | 484 | bool "Motorola EZX A780" |
| @@ -489,6 +510,21 @@ config MACH_EZX_E2 | |||
| 489 | default y | 510 | default y |
| 490 | depends on PXA_EZX | 511 | depends on PXA_EZX |
| 491 | 512 | ||
| 513 | config MACH_XCEP | ||
| 514 | bool "Iskratel Electronics XCEP" | ||
| 515 | select PXA25x | ||
| 516 | select MTD | ||
| 517 | select MTD_PARTITIONS | ||
| 518 | select MTD_PHYSMAP | ||
| 519 | select MTD_CFI_INTELEXT | ||
| 520 | select MTD_CFI | ||
| 521 | select MTD_CHAR | ||
| 522 | select SMC91X | ||
| 523 | select PXA_SSP | ||
| 524 | help | ||
| 525 | PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. | ||
| 526 | Tuned for usage in Libera instruments for particle accelerators. | ||
| 527 | |||
| 492 | endmenu | 528 | endmenu |
| 493 | 529 | ||
| 494 | config PXA25x | 530 | config PXA25x |
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index d4c6122a342f..f10e152bfc27 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile | |||
| @@ -31,6 +31,7 @@ obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o | |||
| 31 | obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o | 31 | obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o |
| 32 | obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o | 32 | obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o |
| 33 | obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o | 33 | obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o |
| 34 | obj-$(CONFIG_MACH_BALLOON3) += balloon3.o | ||
| 34 | obj-$(CONFIG_MACH_MP900C) += mp900.o | 35 | obj-$(CONFIG_MACH_MP900C) += mp900.o |
| 35 | obj-$(CONFIG_ARCH_PXA_IDP) += idp.o | 36 | obj-$(CONFIG_ARCH_PXA_IDP) += idp.o |
| 36 | obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o | 37 | obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o |
| @@ -58,6 +59,7 @@ obj-$(CONFIG_MACH_E750) += e750.o | |||
| 58 | obj-$(CONFIG_MACH_E400) += e400.o | 59 | obj-$(CONFIG_MACH_E400) += e400.o |
| 59 | obj-$(CONFIG_MACH_E800) += e800.o | 60 | obj-$(CONFIG_MACH_E800) += e800.o |
| 60 | obj-$(CONFIG_MACH_PALMTE2) += palmte2.o | 61 | obj-$(CONFIG_MACH_PALMTE2) += palmte2.o |
| 62 | obj-$(CONFIG_MACH_PALMTC) += palmtc.o | ||
| 61 | obj-$(CONFIG_MACH_PALMT5) += palmt5.o | 63 | obj-$(CONFIG_MACH_PALMT5) += palmt5.o |
| 62 | obj-$(CONFIG_MACH_PALMTX) += palmtx.o | 64 | obj-$(CONFIG_MACH_PALMTX) += palmtx.o |
| 63 | obj-$(CONFIG_MACH_PALMLD) += palmld.o | 65 | obj-$(CONFIG_MACH_PALMLD) += palmld.o |
| @@ -78,6 +80,8 @@ obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o | |||
| 78 | obj-$(CONFIG_MACH_CM_X300) += cm-x300.o | 80 | obj-$(CONFIG_MACH_CM_X300) += cm-x300.o |
| 79 | obj-$(CONFIG_PXA_EZX) += ezx.o | 81 | obj-$(CONFIG_PXA_EZX) += ezx.o |
| 80 | 82 | ||
| 83 | obj-$(CONFIG_MACH_XCEP) += xcep.o | ||
| 84 | |||
| 81 | obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o | 85 | obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o |
| 82 | obj-$(CONFIG_MACH_STARGATE2) += stargate2.o | 86 | obj-$(CONFIG_MACH_STARGATE2) += stargate2.o |
| 83 | obj-$(CONFIG_MACH_CSB726) += csb726.o | 87 | obj-$(CONFIG_MACH_CSB726) += csb726.o |
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c new file mode 100644 index 000000000000..f23138b8fca3 --- /dev/null +++ b/arch/arm/mach-pxa/balloon3.c | |||
| @@ -0,0 +1,361 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-pxa/balloon3.c | ||
| 3 | * | ||
| 4 | * Support for Balloonboard.org Balloon3 board. | ||
| 5 | * | ||
| 6 | * Author: Nick Bane, Wookey, Jonathan McDowell | ||
| 7 | * Created: June, 2006 | ||
| 8 | * Copyright: Toby Churchill Ltd | ||
| 9 | * Derived from mainstone.c, by Nico Pitre | ||
| 10 | * | ||
| 11 | * This program is free software; you can redistribute it and/or modify | ||
| 12 | * it under the terms of the GNU General Public License version 2 as | ||
| 13 | * published by the Free Software Foundation. | ||
| 14 | */ | ||
| 15 | |||
| 16 | #include <linux/init.h> | ||
| 17 | #include <linux/platform_device.h> | ||
| 18 | #include <linux/sysdev.h> | ||
| 19 | #include <linux/interrupt.h> | ||
| 20 | #include <linux/sched.h> | ||
| 21 | #include <linux/bitops.h> | ||
| 22 | #include <linux/fb.h> | ||
| 23 | #include <linux/gpio.h> | ||
| 24 | #include <linux/ioport.h> | ||
| 25 | #include <linux/mtd/mtd.h> | ||
| 26 | #include <linux/mtd/partitions.h> | ||
| 27 | #include <linux/types.h> | ||
| 28 | |||
| 29 | #include <asm/setup.h> | ||
| 30 | #include <asm/mach-types.h> | ||
| 31 | #include <asm/irq.h> | ||
| 32 | #include <asm/sizes.h> | ||
| 33 | |||
| 34 | #include <asm/mach/arch.h> | ||
| 35 | #include <asm/mach/map.h> | ||
| 36 | #include <asm/mach/irq.h> | ||
| 37 | #include <asm/mach/flash.h> | ||
| 38 | |||
| 39 | #include <mach/pxa27x.h> | ||
| 40 | #include <mach/balloon3.h> | ||
| 41 | #include <mach/audio.h> | ||
| 42 | #include <mach/pxafb.h> | ||
| 43 | #include <mach/mmc.h> | ||
| 44 | #include <mach/udc.h> | ||
| 45 | #include <mach/pxa27x-udc.h> | ||
| 46 | #include <mach/irda.h> | ||
| 47 | #include <mach/ohci.h> | ||
| 48 | |||
| 49 | #include <plat/i2c.h> | ||
| 50 | |||
| 51 | #include "generic.h" | ||
| 52 | #include "devices.h" | ||
| 53 | |||
| 54 | static unsigned long balloon3_irq_enabled; | ||
| 55 | |||
| 56 | static unsigned long balloon3_features_present = | ||
| 57 | (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) | | ||
| 58 | (1 << BALLOON3_FEATURE_AUDIO) | | ||
| 59 | (1 << BALLOON3_FEATURE_TOPPOLY); | ||
| 60 | |||
| 61 | int balloon3_has(enum balloon3_features feature) | ||
| 62 | { | ||
| 63 | return (balloon3_features_present & (1 << feature)) ? 1 : 0; | ||
| 64 | } | ||
| 65 | EXPORT_SYMBOL_GPL(balloon3_has); | ||
| 66 | |||
| 67 | int __init parse_balloon3_features(char *arg) | ||
| 68 | { | ||
| 69 | if (!arg) | ||
| 70 | return 0; | ||
| 71 | |||
| 72 | return strict_strtoul(arg, 0, &balloon3_features_present); | ||
| 73 | } | ||
| 74 | early_param("balloon3_features", parse_balloon3_features); | ||
| 75 | |||
| 76 | static void balloon3_mask_irq(unsigned int irq) | ||
| 77 | { | ||
| 78 | int balloon3_irq = (irq - BALLOON3_IRQ(0)); | ||
| 79 | balloon3_irq_enabled &= ~(1 << balloon3_irq); | ||
| 80 | __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG); | ||
| 81 | } | ||
| 82 | |||
| 83 | static void balloon3_unmask_irq(unsigned int irq) | ||
| 84 | { | ||
| 85 | int balloon3_irq = (irq - BALLOON3_IRQ(0)); | ||
| 86 | balloon3_irq_enabled |= (1 << balloon3_irq); | ||
| 87 | __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG); | ||
| 88 | } | ||
| 89 | |||
| 90 | static struct irq_chip balloon3_irq_chip = { | ||
| 91 | .name = "FPGA", | ||
| 92 | .ack = balloon3_mask_irq, | ||
| 93 | .mask = balloon3_mask_irq, | ||
| 94 | .unmask = balloon3_unmask_irq, | ||
| 95 | }; | ||
| 96 | |||
| 97 | static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc) | ||
| 98 | { | ||
| 99 | unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & | ||
| 100 | balloon3_irq_enabled; | ||
| 101 | |||
| 102 | do { | ||
| 103 | /* clear useless edge notification */ | ||
| 104 | if (desc->chip->ack) | ||
| 105 | desc->chip->ack(BALLOON3_AUX_NIRQ); | ||
| 106 | while (pending) { | ||
| 107 | irq = BALLOON3_IRQ(0) + __ffs(pending); | ||
| 108 | generic_handle_irq(irq); | ||
| 109 | pending &= pending - 1; | ||
| 110 | } | ||
| 111 | pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & | ||
| 112 | balloon3_irq_enabled; | ||
| 113 | } while (pending); | ||
| 114 | } | ||
| 115 | |||
| 116 | static void __init balloon3_init_irq(void) | ||
| 117 | { | ||
| 118 | int irq; | ||
| 119 | |||
| 120 | pxa27x_init_irq(); | ||
| 121 | /* setup extra Balloon3 irqs */ | ||
| 122 | for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) { | ||
| 123 | set_irq_chip(irq, &balloon3_irq_chip); | ||
| 124 | set_irq_handler(irq, handle_level_irq); | ||
| 125 | set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); | ||
| 126 | } | ||
| 127 | |||
| 128 | set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler); | ||
| 129 | set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING); | ||
| 130 | |||
| 131 | pr_debug("%s: chained handler installed - irq %d automatically " | ||
| 132 | "enabled\n", __func__, BALLOON3_AUX_NIRQ); | ||
| 133 | } | ||
| 134 | |||
| 135 | static void balloon3_backlight_power(int on) | ||
| 136 | { | ||
| 137 | pr_debug("%s: power is %s\n", __func__, on ? "on" : "off"); | ||
| 138 | gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on); | ||
| 139 | } | ||
| 140 | |||
| 141 | static unsigned long balloon3_lcd_pin_config[] = { | ||
| 142 | /* LCD - 16bpp Active TFT */ | ||
| 143 | GPIO58_LCD_LDD_0, | ||
| 144 | GPIO59_LCD_LDD_1, | ||
| 145 | GPIO60_LCD_LDD_2, | ||
| 146 | GPIO61_LCD_LDD_3, | ||
| 147 | GPIO62_LCD_LDD_4, | ||
| 148 | GPIO63_LCD_LDD_5, | ||
| 149 | GPIO64_LCD_LDD_6, | ||
| 150 | GPIO65_LCD_LDD_7, | ||
| 151 | GPIO66_LCD_LDD_8, | ||
| 152 | GPIO67_LCD_LDD_9, | ||
| 153 | GPIO68_LCD_LDD_10, | ||
| 154 | GPIO69_LCD_LDD_11, | ||
| 155 | GPIO70_LCD_LDD_12, | ||
| 156 | GPIO71_LCD_LDD_13, | ||
| 157 | GPIO72_LCD_LDD_14, | ||
| 158 | GPIO73_LCD_LDD_15, | ||
| 159 | GPIO74_LCD_FCLK, | ||
| 160 | GPIO75_LCD_LCLK, | ||
| 161 | GPIO76_LCD_PCLK, | ||
| 162 | GPIO77_LCD_BIAS, | ||
| 163 | |||
| 164 | GPIO99_GPIO, /* Backlight */ | ||
| 165 | }; | ||
| 166 | |||
| 167 | static struct pxafb_mode_info balloon3_lcd_modes[] = { | ||
| 168 | { | ||
| 169 | .pixclock = 38000, | ||
| 170 | .xres = 480, | ||
| 171 | .yres = 640, | ||
| 172 | .bpp = 16, | ||
| 173 | .hsync_len = 8, | ||
| 174 | .left_margin = 8, | ||
| 175 | .right_margin = 8, | ||
| 176 | .vsync_len = 2, | ||
| 177 | .upper_margin = 4, | ||
| 178 | .lower_margin = 5, | ||
| 179 | .sync = 0, | ||
| 180 | }, | ||
| 181 | }; | ||
| 182 | |||
| 183 | static struct pxafb_mach_info balloon3_pxafb_info = { | ||
| 184 | .modes = balloon3_lcd_modes, | ||
| 185 | .num_modes = ARRAY_SIZE(balloon3_lcd_modes), | ||
| 186 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, | ||
| 187 | .pxafb_backlight_power = balloon3_backlight_power, | ||
| 188 | }; | ||
| 189 | |||
| 190 | static unsigned long balloon3_mmc_pin_config[] = { | ||
| 191 | GPIO32_MMC_CLK, | ||
| 192 | GPIO92_MMC_DAT_0, | ||
| 193 | GPIO109_MMC_DAT_1, | ||
| 194 | GPIO110_MMC_DAT_2, | ||
| 195 | GPIO111_MMC_DAT_3, | ||
| 196 | GPIO112_MMC_CMD, | ||
| 197 | }; | ||
| 198 | |||
| 199 | static void balloon3_mci_setpower(struct device *dev, unsigned int vdd) | ||
| 200 | { | ||
| 201 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
| 202 | |||
| 203 | if ((1 << vdd) & p_d->ocr_mask) { | ||
| 204 | pr_debug("%s: on\n", __func__); | ||
| 205 | /* FIXME something to prod here? */ | ||
| 206 | } else { | ||
| 207 | pr_debug("%s: off\n", __func__); | ||
| 208 | /* FIXME something to prod here? */ | ||
| 209 | } | ||
| 210 | } | ||
| 211 | |||
| 212 | static struct pxamci_platform_data balloon3_mci_platform_data = { | ||
| 213 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | ||
| 214 | .setpower = balloon3_mci_setpower, | ||
| 215 | }; | ||
| 216 | |||
| 217 | static int balloon3_udc_is_connected(void) | ||
| 218 | { | ||
| 219 | pr_debug("%s: udc connected\n", __func__); | ||
| 220 | return 1; | ||
| 221 | } | ||
| 222 | |||
| 223 | static void balloon3_udc_command(int cmd) | ||
| 224 | { | ||
| 225 | switch (cmd) { | ||
| 226 | case PXA2XX_UDC_CMD_CONNECT: | ||
| 227 | UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE); | ||
| 228 | pr_debug("%s: connect\n", __func__); | ||
| 229 | break; | ||
| 230 | case PXA2XX_UDC_CMD_DISCONNECT: | ||
| 231 | UP2OCR &= ~UP2OCR_DPPUE; | ||
| 232 | pr_debug("%s: disconnect\n", __func__); | ||
| 233 | break; | ||
| 234 | } | ||
| 235 | } | ||
| 236 | |||
| 237 | static struct pxa2xx_udc_mach_info balloon3_udc_info = { | ||
| 238 | .udc_is_connected = balloon3_udc_is_connected, | ||
| 239 | .udc_command = balloon3_udc_command, | ||
| 240 | }; | ||
| 241 | |||
| 242 | static struct pxaficp_platform_data balloon3_ficp_platform_data = { | ||
| 243 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | ||
| 244 | }; | ||
| 245 | |||
| 246 | static unsigned long balloon3_ohci_pin_config[] = { | ||
| 247 | GPIO88_USBH1_PWR, | ||
| 248 | GPIO89_USBH1_PEN, | ||
| 249 | }; | ||
| 250 | |||
| 251 | static struct pxaohci_platform_data balloon3_ohci_platform_data = { | ||
| 252 | .port_mode = PMM_PERPORT_MODE, | ||
| 253 | .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, | ||
| 254 | }; | ||
| 255 | |||
| 256 | static unsigned long balloon3_pin_config[] __initdata = { | ||
| 257 | /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ | ||
| 258 | GPIO42_BTUART_RXD, | ||
| 259 | GPIO43_BTUART_TXD, | ||
| 260 | GPIO44_BTUART_CTS, | ||
| 261 | GPIO45_BTUART_RTS, | ||
| 262 | |||
| 263 | /* Wakeup GPIO */ | ||
| 264 | GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, | ||
| 265 | |||
| 266 | /* NAND & IDLE LED GPIOs */ | ||
| 267 | GPIO9_GPIO, | ||
| 268 | GPIO10_GPIO, | ||
| 269 | }; | ||
| 270 | |||
| 271 | static struct gpio_led balloon3_gpio_leds[] = { | ||
| 272 | { | ||
| 273 | .name = "balloon3:green:idle", | ||
| 274 | .default_trigger = "heartbeat", | ||
| 275 | .gpio = BALLOON3_GPIO_LED_IDLE, | ||
| 276 | .active_low = 1, | ||
| 277 | }, | ||
| 278 | { | ||
| 279 | .name = "balloon3:green:nand", | ||
| 280 | .default_trigger = "nand-disk", | ||
| 281 | .gpio = BALLOON3_GPIO_LED_NAND, | ||
| 282 | .active_low = 1, | ||
| 283 | }, | ||
| 284 | }; | ||
| 285 | |||
| 286 | static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = { | ||
| 287 | .leds = balloon3_gpio_leds, | ||
| 288 | .num_leds = ARRAY_SIZE(balloon3_gpio_leds), | ||
| 289 | }; | ||
| 290 | |||
| 291 | static struct platform_device balloon3led_device = { | ||
| 292 | .name = "leds-gpio", | ||
| 293 | .id = -1, | ||
| 294 | .dev = { | ||
| 295 | .platform_data = &balloon3_gpio_leds_platform_data, | ||
| 296 | }, | ||
| 297 | }; | ||
| 298 | |||
| 299 | static void __init balloon3_init(void) | ||
| 300 | { | ||
| 301 | pr_info("Initialising Balloon3\n"); | ||
| 302 | |||
| 303 | /* system bus arbiter setting | ||
| 304 | * - Core_Park | ||
| 305 | * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 | ||
| 306 | */ | ||
| 307 | ARB_CNTRL = ARB_CORE_PARK | 0x234; | ||
| 308 | |||
| 309 | pxa_set_i2c_info(NULL); | ||
| 310 | if (balloon3_has(BALLOON3_FEATURE_AUDIO)) | ||
| 311 | pxa_set_ac97_info(NULL); | ||
| 312 | |||
| 313 | if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) { | ||
| 314 | pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); | ||
| 315 | gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, | ||
| 316 | "LCD Backlight Power"); | ||
| 317 | gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); | ||
| 318 | set_pxa_fb_info(&balloon3_pxafb_info); | ||
| 319 | } | ||
| 320 | |||
| 321 | if (balloon3_has(BALLOON3_FEATURE_MMC)) { | ||
| 322 | pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config)); | ||
| 323 | pxa_set_mci_info(&balloon3_mci_platform_data); | ||
| 324 | } | ||
| 325 | pxa_set_ficp_info(&balloon3_ficp_platform_data); | ||
| 326 | if (balloon3_has(BALLOON3_FEATURE_OHCI)) { | ||
| 327 | pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config)); | ||
| 328 | pxa_set_ohci_info(&balloon3_ohci_platform_data); | ||
| 329 | } | ||
| 330 | pxa_set_udc_info(&balloon3_udc_info); | ||
| 331 | |||
| 332 | pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config)); | ||
| 333 | |||
| 334 | platform_device_register(&balloon3led_device); | ||
| 335 | } | ||
| 336 | |||
| 337 | static struct map_desc balloon3_io_desc[] __initdata = { | ||
| 338 | { /* CPLD/FPGA */ | ||
| 339 | .virtual = BALLOON3_FPGA_VIRT, | ||
| 340 | .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS), | ||
| 341 | .length = BALLOON3_FPGA_LENGTH, | ||
| 342 | .type = MT_DEVICE, | ||
| 343 | }, | ||
| 344 | }; | ||
| 345 | |||
| 346 | static void __init balloon3_map_io(void) | ||
| 347 | { | ||
| 348 | pxa_map_io(); | ||
| 349 | iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc)); | ||
| 350 | } | ||
| 351 | |||
| 352 | MACHINE_START(BALLOON3, "Balloon3") | ||
| 353 | /* Maintainer: Nick Bane. */ | ||
| 354 | .phys_io = 0x40000000, | ||
| 355 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | ||
| 356 | .map_io = balloon3_map_io, | ||
| 357 | .init_irq = balloon3_init_irq, | ||
| 358 | .timer = &pxa_timer, | ||
| 359 | .init_machine = balloon3_init, | ||
| 360 | .boot_params = PHYS_OFFSET + 0x100, | ||
| 361 | MACHINE_END | ||
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 5599bceff738..978a3667e90d 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h | |||
| @@ -12,7 +12,6 @@ struct clk { | |||
| 12 | unsigned int cken; | 12 | unsigned int cken; |
| 13 | unsigned int delay; | 13 | unsigned int delay; |
| 14 | unsigned int enabled; | 14 | unsigned int enabled; |
| 15 | struct clk *other; | ||
| 16 | }; | 15 | }; |
| 17 | 16 | ||
| 18 | #define INIT_CLKREG(_clk,_devname,_conname) \ | 17 | #define INIT_CLKREG(_clk,_devname,_conname) \ |
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 1d2cec25391d..eea78b6c2bc5 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c | |||
| @@ -13,13 +13,18 @@ | |||
| 13 | #include <linux/sysdev.h> | 13 | #include <linux/sysdev.h> |
| 14 | #include <linux/irq.h> | 14 | #include <linux/irq.h> |
| 15 | #include <linux/gpio.h> | 15 | #include <linux/gpio.h> |
| 16 | #include <linux/delay.h> | ||
| 16 | 17 | ||
| 17 | #include <linux/rtc-v3020.h> | 18 | #include <linux/rtc-v3020.h> |
| 18 | #include <video/mbxfb.h> | 19 | #include <video/mbxfb.h> |
| 19 | 20 | ||
| 21 | #include <linux/spi/spi.h> | ||
| 22 | #include <linux/spi/libertas_spi.h> | ||
| 23 | |||
| 20 | #include <mach/pxa27x.h> | 24 | #include <mach/pxa27x.h> |
| 21 | #include <mach/ohci.h> | 25 | #include <mach/ohci.h> |
| 22 | #include <mach/mmc.h> | 26 | #include <mach/mmc.h> |
| 27 | #include <mach/pxa2xx_spi.h> | ||
| 23 | 28 | ||
| 24 | #include "generic.h" | 29 | #include "generic.h" |
| 25 | 30 | ||
| @@ -34,6 +39,10 @@ | |||
| 34 | /* MMC power enable */ | 39 | /* MMC power enable */ |
| 35 | #define GPIO105_MMC_POWER (105) | 40 | #define GPIO105_MMC_POWER (105) |
| 36 | 41 | ||
| 42 | /* WLAN GPIOS */ | ||
| 43 | #define GPIO19_WLAN_STRAP (19) | ||
| 44 | #define GPIO102_WLAN_RST (102) | ||
| 45 | |||
| 37 | static unsigned long cmx270_pin_config[] = { | 46 | static unsigned long cmx270_pin_config[] = { |
| 38 | /* AC'97 */ | 47 | /* AC'97 */ |
| 39 | GPIO28_AC97_BITCLK, | 48 | GPIO28_AC97_BITCLK, |
| @@ -94,8 +103,8 @@ static unsigned long cmx270_pin_config[] = { | |||
| 94 | GPIO26_SSP1_RXD, | 103 | GPIO26_SSP1_RXD, |
| 95 | 104 | ||
| 96 | /* SSP2 */ | 105 | /* SSP2 */ |
| 97 | GPIO19_SSP2_SCLK, | 106 | GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ |
| 98 | GPIO14_SSP2_SFRM, | 107 | GPIO14_GPIO, |
| 99 | GPIO87_SSP2_TXD, | 108 | GPIO87_SSP2_TXD, |
| 100 | GPIO88_SSP2_RXD, | 109 | GPIO88_SSP2_RXD, |
| 101 | 110 | ||
| @@ -123,6 +132,7 @@ static unsigned long cmx270_pin_config[] = { | |||
| 123 | GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, | 132 | GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, |
| 124 | GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */ | 133 | GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */ |
| 125 | GPIO53_GPIO, /* PC card reset */ | 134 | GPIO53_GPIO, /* PC card reset */ |
| 135 | GPIO102_GPIO, /* WLAN reset */ | ||
| 126 | 136 | ||
| 127 | /* NAND controls */ | 137 | /* NAND controls */ |
| 128 | GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ | 138 | GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ |
| @@ -131,6 +141,7 @@ static unsigned long cmx270_pin_config[] = { | |||
| 131 | /* interrupts */ | 141 | /* interrupts */ |
| 132 | GPIO10_GPIO, /* DM9000 interrupt */ | 142 | GPIO10_GPIO, /* DM9000 interrupt */ |
| 133 | GPIO83_GPIO, /* MMC card detect */ | 143 | GPIO83_GPIO, /* MMC card detect */ |
| 144 | GPIO95_GPIO, /* WLAN interrupt */ | ||
| 134 | }; | 145 | }; |
| 135 | 146 | ||
| 136 | /* V3020 RTC */ | 147 | /* V3020 RTC */ |
| @@ -271,64 +282,114 @@ static inline void cmx270_init_ohci(void) {} | |||
| 271 | #endif | 282 | #endif |
| 272 | 283 | ||
| 273 | #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) | 284 | #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) |
| 274 | static int cmx270_mci_init(struct device *dev, | 285 | static struct pxamci_platform_data cmx270_mci_platform_data = { |
| 275 | irq_handler_t cmx270_detect_int, | 286 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 276 | void *data) | 287 | .gpio_card_detect = GPIO83_MMC_IRQ, |
| 288 | .gpio_card_ro = -1, | ||
| 289 | .gpio_power = GPIO105_MMC_POWER, | ||
| 290 | .gpio_power_invert = 1, | ||
| 291 | }; | ||
| 292 | |||
| 293 | static void __init cmx270_init_mmc(void) | ||
| 277 | { | 294 | { |
| 278 | int err; | 295 | pxa_set_mci_info(&cmx270_mci_platform_data); |
| 296 | } | ||
| 297 | #else | ||
| 298 | static inline void cmx270_init_mmc(void) {} | ||
| 299 | #endif | ||
| 300 | |||
| 301 | #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) | ||
| 302 | static struct pxa2xx_spi_master cm_x270_spi_info = { | ||
| 303 | .num_chipselect = 1, | ||
| 304 | .enable_dma = 1, | ||
| 305 | }; | ||
| 306 | |||
| 307 | static struct pxa2xx_spi_chip cm_x270_libertas_chip = { | ||
| 308 | .rx_threshold = 1, | ||
| 309 | .tx_threshold = 1, | ||
| 310 | .timeout = 1000, | ||
| 311 | .gpio_cs = 14, | ||
| 312 | }; | ||
| 313 | |||
| 314 | static unsigned long cm_x270_libertas_pin_config[] = { | ||
| 315 | /* SSP2 */ | ||
| 316 | GPIO19_SSP2_SCLK, | ||
| 317 | GPIO14_GPIO, | ||
| 318 | GPIO87_SSP2_TXD, | ||
| 319 | GPIO88_SSP2_RXD, | ||
| 320 | |||
| 321 | }; | ||
| 279 | 322 | ||
| 280 | err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power"); | 323 | static int cm_x270_libertas_setup(struct spi_device *spi) |
| 281 | if (err) { | 324 | { |
| 282 | dev_warn(dev, "power gpio unavailable\n"); | 325 | int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); |
| 326 | if (err) | ||
| 283 | return err; | 327 | return err; |
| 284 | } | ||
| 285 | 328 | ||
| 286 | gpio_direction_output(GPIO105_MMC_POWER, 0); | 329 | err = gpio_request(GPIO102_WLAN_RST, "WLAN RST"); |
| 330 | if (err) | ||
| 331 | goto err_free_strap; | ||
| 287 | 332 | ||
| 288 | err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, | 333 | err = gpio_direction_output(GPIO102_WLAN_RST, 0); |
| 289 | IRQF_DISABLED | IRQF_TRIGGER_FALLING, | 334 | if (err) |
| 290 | "MMC card detect", data); | 335 | goto err_free_strap; |
| 291 | if (err) { | 336 | msleep(100); |
| 292 | gpio_free(GPIO105_MMC_POWER); | 337 | |
| 293 | dev_err(dev, "cmx270_mci_init: MMC/SD: can't" | 338 | err = gpio_direction_output(GPIO19_WLAN_STRAP, 1); |
| 294 | " request MMC card detect IRQ\n"); | 339 | if (err) |
| 295 | } | 340 | goto err_free_strap; |
| 341 | msleep(100); | ||
| 342 | |||
| 343 | pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config)); | ||
| 344 | |||
| 345 | gpio_set_value(GPIO102_WLAN_RST, 1); | ||
| 346 | msleep(100); | ||
| 347 | |||
| 348 | spi->bits_per_word = 16; | ||
| 349 | spi_setup(spi); | ||
| 350 | |||
| 351 | return 0; | ||
| 352 | |||
| 353 | err_free_strap: | ||
| 354 | gpio_free(GPIO19_WLAN_STRAP); | ||
| 296 | 355 | ||
| 297 | return err; | 356 | return err; |
| 298 | } | 357 | } |
| 299 | 358 | ||
| 300 | static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) | 359 | static int cm_x270_libertas_teardown(struct spi_device *spi) |
| 301 | { | 360 | { |
| 302 | struct pxamci_platform_data *p_d = dev->platform_data; | 361 | gpio_set_value(GPIO102_WLAN_RST, 0); |
| 303 | 362 | gpio_free(GPIO102_WLAN_RST); | |
| 304 | if ((1 << vdd) & p_d->ocr_mask) { | 363 | gpio_free(GPIO19_WLAN_STRAP); |
| 305 | dev_dbg(dev, "power on\n"); | ||
| 306 | gpio_set_value(GPIO105_MMC_POWER, 0); | ||
| 307 | } else { | ||
| 308 | gpio_set_value(GPIO105_MMC_POWER, 1); | ||
| 309 | dev_dbg(dev, "power off\n"); | ||
| 310 | } | ||
| 311 | } | ||
| 312 | 364 | ||
| 313 | static void cmx270_mci_exit(struct device *dev, void *data) | 365 | return 0; |
| 314 | { | ||
| 315 | free_irq(CMX270_MMC_IRQ, data); | ||
| 316 | gpio_free(GPIO105_MMC_POWER); | ||
| 317 | } | 366 | } |
| 318 | 367 | ||
| 319 | static struct pxamci_platform_data cmx270_mci_platform_data = { | 368 | struct libertas_spi_platform_data cm_x270_libertas_pdata = { |
| 320 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 369 | .use_dummy_writes = 1, |
| 321 | .init = cmx270_mci_init, | 370 | .setup = cm_x270_libertas_setup, |
| 322 | .setpower = cmx270_mci_setpower, | 371 | .teardown = cm_x270_libertas_teardown, |
| 323 | .exit = cmx270_mci_exit, | ||
| 324 | }; | 372 | }; |
| 325 | 373 | ||
| 326 | static void __init cmx270_init_mmc(void) | 374 | static struct spi_board_info cm_x270_spi_devices[] __initdata = { |
| 375 | { | ||
| 376 | .modalias = "libertas_spi", | ||
| 377 | .max_speed_hz = 13000000, | ||
| 378 | .bus_num = 2, | ||
| 379 | .irq = gpio_to_irq(95), | ||
| 380 | .chip_select = 0, | ||
| 381 | .controller_data = &cm_x270_libertas_chip, | ||
| 382 | .platform_data = &cm_x270_libertas_pdata, | ||
| 383 | }, | ||
| 384 | }; | ||
| 385 | |||
| 386 | static void __init cmx270_init_spi(void) | ||
| 327 | { | 387 | { |
| 328 | pxa_set_mci_info(&cmx270_mci_platform_data); | 388 | pxa2xx_set_spi_info(2, &cm_x270_spi_info); |
| 389 | spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices)); | ||
| 329 | } | 390 | } |
| 330 | #else | 391 | #else |
| 331 | static inline void cmx270_init_mmc(void) {} | 392 | static inline void cmx270_init_spi(void) {} |
| 332 | #endif | 393 | #endif |
| 333 | 394 | ||
| 334 | void __init cmx270_init(void) | 395 | void __init cmx270_init(void) |
| @@ -343,4 +404,5 @@ void __init cmx270_init(void) | |||
| 343 | cmx270_init_mmc(); | 404 | cmx270_init_mmc(); |
| 344 | cmx270_init_ohci(); | 405 | cmx270_init_ohci(); |
| 345 | cmx270_init_2700G(); | 406 | cmx270_init_2700G(); |
| 407 | cmx270_init_spi(); | ||
| 346 | } | 408 | } |
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 465da26591bd..aac2cda60e09 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c | |||
| @@ -306,68 +306,21 @@ static void cm_x300_mci_exit(struct device *dev, void *data) | |||
| 306 | } | 306 | } |
| 307 | 307 | ||
| 308 | static struct pxamci_platform_data cm_x300_mci_platform_data = { | 308 | static struct pxamci_platform_data cm_x300_mci_platform_data = { |
| 309 | .detect_delay = 20, | 309 | .detect_delay = 20, |
| 310 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 310 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 311 | .init = cm_x300_mci_init, | 311 | .init = cm_x300_mci_init, |
| 312 | .exit = cm_x300_mci_exit, | 312 | .exit = cm_x300_mci_exit, |
| 313 | .gpio_card_detect = -1, | ||
| 314 | .gpio_card_ro = -1, | ||
| 315 | .gpio_power = -1, | ||
| 313 | }; | 316 | }; |
| 314 | 317 | ||
| 315 | static int cm_x300_mci2_ro(struct device *dev) | ||
| 316 | { | ||
| 317 | return gpio_get_value(GPIO85_MMC2_WP); | ||
| 318 | } | ||
| 319 | |||
| 320 | static int cm_x300_mci2_init(struct device *dev, | ||
| 321 | irq_handler_t cm_x300_detect_int, | ||
| 322 | void *data) | ||
| 323 | { | ||
| 324 | int err; | ||
| 325 | |||
| 326 | /* | ||
| 327 | * setup GPIO for CM-X300 MMC controller | ||
| 328 | */ | ||
| 329 | err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect"); | ||
| 330 | if (err) | ||
| 331 | goto err_request_cd; | ||
| 332 | gpio_direction_input(GPIO82_MMC2_IRQ); | ||
| 333 | |||
| 334 | err = gpio_request(GPIO85_MMC2_WP, "mmc write protect"); | ||
| 335 | if (err) | ||
| 336 | goto err_request_wp; | ||
| 337 | gpio_direction_input(GPIO85_MMC2_WP); | ||
| 338 | |||
| 339 | err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int, | ||
| 340 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | ||
| 341 | "MMC card detect", data); | ||
| 342 | if (err) { | ||
| 343 | printk(KERN_ERR "%s: MMC/SD/SDIO: " | ||
| 344 | "can't request card detect IRQ\n", __func__); | ||
| 345 | goto err_request_irq; | ||
| 346 | } | ||
| 347 | |||
| 348 | return 0; | ||
| 349 | |||
| 350 | err_request_irq: | ||
| 351 | gpio_free(GPIO85_MMC2_WP); | ||
| 352 | err_request_wp: | ||
| 353 | gpio_free(GPIO82_MMC2_IRQ); | ||
| 354 | err_request_cd: | ||
| 355 | return err; | ||
| 356 | } | ||
| 357 | |||
| 358 | static void cm_x300_mci2_exit(struct device *dev, void *data) | ||
| 359 | { | ||
| 360 | free_irq(CM_X300_MMC2_IRQ, data); | ||
| 361 | gpio_free(GPIO82_MMC2_IRQ); | ||
| 362 | gpio_free(GPIO85_MMC2_WP); | ||
| 363 | } | ||
| 364 | |||
| 365 | static struct pxamci_platform_data cm_x300_mci2_platform_data = { | 318 | static struct pxamci_platform_data cm_x300_mci2_platform_data = { |
| 366 | .detect_delay = 20, | 319 | .detect_delay = 20, |
| 367 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 320 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 368 | .init = cm_x300_mci2_init, | 321 | .gpio_card_detect = GPIO82_MMC2_IRQ, |
| 369 | .exit = cm_x300_mci2_exit, | 322 | .gpio_card_ro = GPIO85_MMC2_WP, |
| 370 | .get_ro = cm_x300_mci2_ro, | 323 | .gpio_power = -1, |
| 371 | }; | 324 | }; |
| 372 | 325 | ||
| 373 | static void __init cm_x300_init_mmc(void) | 326 | static void __init cm_x300_init_mmc(void) |
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 7c9c34c19ae2..37c239c56568 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c | |||
| @@ -172,6 +172,7 @@ void __init colibri_pxa300_init(void) | |||
| 172 | { | 172 | { |
| 173 | colibri_pxa300_init_eth(); | 173 | colibri_pxa300_init_eth(); |
| 174 | colibri_pxa300_init_ohci(); | 174 | colibri_pxa300_init_ohci(); |
| 175 | colibri_pxa3xx_init_nand(); | ||
| 175 | colibri_pxa300_init_lcd(); | 176 | colibri_pxa300_init_lcd(); |
| 176 | colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO)); | 177 | colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO)); |
| 177 | colibri_pxa310_init_ac97(); | 178 | colibri_pxa310_init_ac97(); |
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index a18d37b3c5e6..494572825c7d 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c | |||
| @@ -164,15 +164,48 @@ static inline void __init colibri_pxa320_init_ac97(void) | |||
| 164 | static inline void colibri_pxa320_init_ac97(void) {} | 164 | static inline void colibri_pxa320_init_ac97(void) {} |
| 165 | #endif | 165 | #endif |
| 166 | 166 | ||
| 167 | /* | ||
| 168 | * The following configuration is verified to work with the Toradex Orchid | ||
| 169 | * carrier board | ||
| 170 | */ | ||
| 171 | static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = { | ||
| 172 | /* UART 1 configuration (may be set by bootloader) */ | ||
| 173 | GPIO99_UART1_CTS, | ||
| 174 | GPIO104_UART1_RTS, | ||
| 175 | GPIO97_UART1_RXD, | ||
| 176 | GPIO98_UART1_TXD, | ||
| 177 | GPIO101_UART1_DTR, | ||
| 178 | GPIO103_UART1_DSR, | ||
| 179 | GPIO100_UART1_DCD, | ||
| 180 | GPIO102_UART1_RI, | ||
| 181 | |||
| 182 | /* UART 2 configuration */ | ||
| 183 | GPIO109_UART2_CTS, | ||
| 184 | GPIO112_UART2_RTS, | ||
| 185 | GPIO110_UART2_RXD, | ||
| 186 | GPIO111_UART2_TXD, | ||
| 187 | |||
| 188 | /* UART 3 configuration */ | ||
| 189 | GPIO30_UART3_RXD, | ||
| 190 | GPIO31_UART3_TXD, | ||
| 191 | }; | ||
| 192 | |||
| 193 | static void __init colibri_pxa320_init_uart(void) | ||
| 194 | { | ||
| 195 | pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config)); | ||
| 196 | } | ||
| 197 | |||
| 167 | void __init colibri_pxa320_init(void) | 198 | void __init colibri_pxa320_init(void) |
| 168 | { | 199 | { |
| 169 | colibri_pxa320_init_eth(); | 200 | colibri_pxa320_init_eth(); |
| 170 | colibri_pxa320_init_ohci(); | 201 | colibri_pxa320_init_ohci(); |
| 202 | colibri_pxa3xx_init_nand(); | ||
| 171 | colibri_pxa320_init_lcd(); | 203 | colibri_pxa320_init_lcd(); |
| 172 | colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO)); | 204 | colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO)); |
| 173 | colibri_pxa320_init_ac97(); | 205 | colibri_pxa320_init_ac97(); |
| 174 | colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config), | 206 | colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config), |
| 175 | mfp_to_gpio(MFP_PIN_GPIO28)); | 207 | mfp_to_gpio(MFP_PIN_GPIO28)); |
| 208 | colibri_pxa320_init_uart(); | ||
| 176 | } | 209 | } |
| 177 | 210 | ||
| 178 | MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") | 211 | MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") |
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index ea34e34f8cd8..efebaf4d734d 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c | |||
| @@ -25,6 +25,7 @@ | |||
| 25 | #include <mach/colibri.h> | 25 | #include <mach/colibri.h> |
| 26 | #include <mach/mmc.h> | 26 | #include <mach/mmc.h> |
| 27 | #include <mach/pxafb.h> | 27 | #include <mach/pxafb.h> |
| 28 | #include <mach/pxa3xx_nand.h> | ||
| 28 | 29 | ||
| 29 | #include "generic.h" | 30 | #include "generic.h" |
| 30 | #include "devices.h" | 31 | #include "devices.h" |
| @@ -95,10 +96,13 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data) | |||
| 95 | } | 96 | } |
| 96 | 97 | ||
| 97 | static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { | 98 | static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { |
| 98 | .detect_delay = 20, | 99 | .detect_delay = 20, |
| 99 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 100 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 100 | .init = colibri_pxa3xx_mci_init, | 101 | .init = colibri_pxa3xx_mci_init, |
| 101 | .exit = colibri_pxa3xx_mci_exit, | 102 | .exit = colibri_pxa3xx_mci_exit, |
| 103 | .gpio_card_detect = -1, | ||
| 104 | .gpio_card_ro = -1, | ||
| 105 | .gpio_power = -1, | ||
| 102 | }; | 106 | }; |
| 103 | 107 | ||
| 104 | void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) | 108 | void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) |
| @@ -154,3 +158,43 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin) | |||
| 154 | } | 158 | } |
| 155 | #endif | 159 | #endif |
| 156 | 160 | ||
| 161 | #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) | ||
| 162 | static struct mtd_partition colibri_nand_partitions[] = { | ||
| 163 | { | ||
| 164 | .name = "bootloader", | ||
| 165 | .offset = 0, | ||
| 166 | .size = SZ_512K, | ||
| 167 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
| 168 | }, | ||
| 169 | { | ||
| 170 | .name = "kernel", | ||
| 171 | .offset = MTDPART_OFS_APPEND, | ||
| 172 | .size = SZ_4M, | ||
| 173 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
| 174 | }, | ||
| 175 | { | ||
| 176 | .name = "reserved", | ||
| 177 | .offset = MTDPART_OFS_APPEND, | ||
| 178 | .size = SZ_1M, | ||
| 179 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
| 180 | }, | ||
| 181 | { | ||
| 182 | .name = "fs", | ||
| 183 | .offset = MTDPART_OFS_APPEND, | ||
| 184 | .size = MTDPART_SIZ_FULL, | ||
| 185 | }, | ||
| 186 | }; | ||
| 187 | |||
| 188 | static struct pxa3xx_nand_platform_data colibri_nand_info = { | ||
| 189 | .enable_arbiter = 1, | ||
| 190 | .keep_config = 1, | ||
| 191 | .parts = colibri_nand_partitions, | ||
| 192 | .nr_parts = ARRAY_SIZE(colibri_nand_partitions), | ||
| 193 | }; | ||
| 194 | |||
| 195 | void __init colibri_pxa3xx_init_nand(void) | ||
| 196 | { | ||
| 197 | pxa3xx_set_nand_info(&colibri_nand_info); | ||
| 198 | } | ||
| 199 | #endif | ||
| 200 | |||
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 5363e1aea3fb..b536b5a5a10d 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c | |||
| @@ -29,6 +29,7 @@ | |||
| 29 | #include <linux/spi/ads7846.h> | 29 | #include <linux/spi/ads7846.h> |
| 30 | #include <linux/spi/corgi_lcd.h> | 30 | #include <linux/spi/corgi_lcd.h> |
| 31 | #include <linux/mtd/sharpsl.h> | 31 | #include <linux/mtd/sharpsl.h> |
| 32 | #include <linux/input/matrix_keypad.h> | ||
| 32 | #include <video/w100fb.h> | 33 | #include <video/w100fb.h> |
| 33 | 34 | ||
| 34 | #include <asm/setup.h> | 35 | #include <asm/setup.h> |
| @@ -104,6 +105,28 @@ static unsigned long corgi_pin_config[] __initdata = { | |||
| 104 | GPIO6_MMC_CLK, | 105 | GPIO6_MMC_CLK, |
| 105 | GPIO8_MMC_CS0, | 106 | GPIO8_MMC_CS0, |
| 106 | 107 | ||
| 108 | /* GPIO Matrix Keypad */ | ||
| 109 | GPIO66_GPIO, /* column 0 */ | ||
| 110 | GPIO67_GPIO, /* column 1 */ | ||
| 111 | GPIO68_GPIO, /* column 2 */ | ||
| 112 | GPIO69_GPIO, /* column 3 */ | ||
| 113 | GPIO70_GPIO, /* column 4 */ | ||
| 114 | GPIO71_GPIO, /* column 5 */ | ||
| 115 | GPIO72_GPIO, /* column 6 */ | ||
| 116 | GPIO73_GPIO, /* column 7 */ | ||
| 117 | GPIO74_GPIO, /* column 8 */ | ||
| 118 | GPIO75_GPIO, /* column 9 */ | ||
| 119 | GPIO76_GPIO, /* column 10 */ | ||
| 120 | GPIO77_GPIO, /* column 11 */ | ||
| 121 | GPIO58_GPIO, /* row 0 */ | ||
| 122 | GPIO59_GPIO, /* row 1 */ | ||
| 123 | GPIO60_GPIO, /* row 2 */ | ||
| 124 | GPIO61_GPIO, /* row 3 */ | ||
| 125 | GPIO62_GPIO, /* row 4 */ | ||
| 126 | GPIO63_GPIO, /* row 5 */ | ||
| 127 | GPIO64_GPIO, /* row 6 */ | ||
| 128 | GPIO65_GPIO, /* row 7 */ | ||
| 129 | |||
| 107 | /* GPIO */ | 130 | /* GPIO */ |
| 108 | GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ | 131 | GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ |
| 109 | GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ | 132 | GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ |
| @@ -267,9 +290,115 @@ static struct platform_device corgifb_device = { | |||
| 267 | /* | 290 | /* |
| 268 | * Corgi Keyboard Device | 291 | * Corgi Keyboard Device |
| 269 | */ | 292 | */ |
| 293 | #define CORGI_KEY_CALENDER KEY_F1 | ||
| 294 | #define CORGI_KEY_ADDRESS KEY_F2 | ||
| 295 | #define CORGI_KEY_FN KEY_F3 | ||
| 296 | #define CORGI_KEY_CANCEL KEY_F4 | ||
| 297 | #define CORGI_KEY_OFF KEY_SUSPEND | ||
| 298 | #define CORGI_KEY_EXOK KEY_F5 | ||
| 299 | #define CORGI_KEY_EXCANCEL KEY_F6 | ||
| 300 | #define CORGI_KEY_EXJOGDOWN KEY_F7 | ||
| 301 | #define CORGI_KEY_EXJOGUP KEY_F8 | ||
| 302 | #define CORGI_KEY_JAP1 KEY_LEFTCTRL | ||
| 303 | #define CORGI_KEY_JAP2 KEY_LEFTALT | ||
| 304 | #define CORGI_KEY_MAIL KEY_F10 | ||
| 305 | #define CORGI_KEY_OK KEY_F11 | ||
| 306 | #define CORGI_KEY_MENU KEY_F12 | ||
| 307 | |||
| 308 | static const uint32_t corgikbd_keymap[] = { | ||
| 309 | KEY(0, 1, KEY_1), | ||
| 310 | KEY(0, 2, KEY_3), | ||
| 311 | KEY(0, 3, KEY_5), | ||
| 312 | KEY(0, 4, KEY_6), | ||
| 313 | KEY(0, 5, KEY_7), | ||
| 314 | KEY(0, 6, KEY_9), | ||
| 315 | KEY(0, 7, KEY_0), | ||
| 316 | KEY(0, 8, KEY_BACKSPACE), | ||
| 317 | KEY(1, 1, KEY_2), | ||
| 318 | KEY(1, 2, KEY_4), | ||
| 319 | KEY(1, 3, KEY_R), | ||
| 320 | KEY(1, 4, KEY_Y), | ||
| 321 | KEY(1, 5, KEY_8), | ||
| 322 | KEY(1, 6, KEY_I), | ||
| 323 | KEY(1, 7, KEY_O), | ||
| 324 | KEY(1, 8, KEY_P), | ||
| 325 | KEY(2, 0, KEY_TAB), | ||
| 326 | KEY(2, 1, KEY_Q), | ||
| 327 | KEY(2, 2, KEY_E), | ||
| 328 | KEY(2, 3, KEY_T), | ||
| 329 | KEY(2, 4, KEY_G), | ||
| 330 | KEY(2, 5, KEY_U), | ||
| 331 | KEY(2, 6, KEY_J), | ||
| 332 | KEY(2, 7, KEY_K), | ||
| 333 | KEY(3, 0, CORGI_KEY_CALENDER), | ||
| 334 | KEY(3, 1, KEY_W), | ||
| 335 | KEY(3, 2, KEY_S), | ||
| 336 | KEY(3, 3, KEY_F), | ||
| 337 | KEY(3, 4, KEY_V), | ||
| 338 | KEY(3, 5, KEY_H), | ||
| 339 | KEY(3, 6, KEY_M), | ||
| 340 | KEY(3, 7, KEY_L), | ||
| 341 | KEY(3, 9, KEY_RIGHTSHIFT), | ||
| 342 | KEY(4, 0, CORGI_KEY_ADDRESS), | ||
| 343 | KEY(4, 1, KEY_A), | ||
| 344 | KEY(4, 2, KEY_D), | ||
| 345 | KEY(4, 3, KEY_C), | ||
| 346 | KEY(4, 4, KEY_B), | ||
| 347 | KEY(4, 5, KEY_N), | ||
| 348 | KEY(4, 6, KEY_DOT), | ||
| 349 | KEY(4, 8, KEY_ENTER), | ||
| 350 | KEY(4, 10, KEY_LEFTSHIFT), | ||
| 351 | KEY(5, 0, CORGI_KEY_MAIL), | ||
| 352 | KEY(5, 1, KEY_Z), | ||
| 353 | KEY(5, 2, KEY_X), | ||
| 354 | KEY(5, 3, KEY_MINUS), | ||
| 355 | KEY(5, 4, KEY_SPACE), | ||
| 356 | KEY(5, 5, KEY_COMMA), | ||
| 357 | KEY(5, 7, KEY_UP), | ||
| 358 | KEY(5, 11, CORGI_KEY_FN), | ||
| 359 | KEY(6, 0, KEY_SYSRQ), | ||
| 360 | KEY(6, 1, CORGI_KEY_JAP1), | ||
| 361 | KEY(6, 2, CORGI_KEY_JAP2), | ||
| 362 | KEY(6, 3, CORGI_KEY_CANCEL), | ||
| 363 | KEY(6, 4, CORGI_KEY_OK), | ||
| 364 | KEY(6, 5, CORGI_KEY_MENU), | ||
| 365 | KEY(6, 6, KEY_LEFT), | ||
| 366 | KEY(6, 7, KEY_DOWN), | ||
| 367 | KEY(6, 8, KEY_RIGHT), | ||
| 368 | KEY(7, 0, CORGI_KEY_OFF), | ||
| 369 | KEY(7, 1, CORGI_KEY_EXOK), | ||
| 370 | KEY(7, 2, CORGI_KEY_EXCANCEL), | ||
| 371 | KEY(7, 3, CORGI_KEY_EXJOGDOWN), | ||
| 372 | KEY(7, 4, CORGI_KEY_EXJOGUP), | ||
| 373 | }; | ||
| 374 | |||
| 375 | static struct matrix_keymap_data corgikbd_keymap_data = { | ||
| 376 | .keymap = corgikbd_keymap, | ||
| 377 | .keymap_size = ARRAY_SIZE(corgikbd_keymap), | ||
| 378 | }; | ||
| 379 | |||
| 380 | static const int corgikbd_row_gpios[] = | ||
| 381 | { 58, 59, 60, 61, 62, 63, 64, 65 }; | ||
| 382 | static const int corgikbd_col_gpios[] = | ||
| 383 | { 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 }; | ||
| 384 | |||
| 385 | static struct matrix_keypad_platform_data corgikbd_pdata = { | ||
| 386 | .keymap_data = &corgikbd_keymap_data, | ||
| 387 | .row_gpios = corgikbd_row_gpios, | ||
| 388 | .col_gpios = corgikbd_col_gpios, | ||
| 389 | .num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios), | ||
| 390 | .num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios), | ||
| 391 | .col_scan_delay_us = 10, | ||
| 392 | .debounce_ms = 10, | ||
| 393 | .wakeup = 1, | ||
| 394 | }; | ||
| 395 | |||
| 270 | static struct platform_device corgikbd_device = { | 396 | static struct platform_device corgikbd_device = { |
| 271 | .name = "corgi-keyboard", | 397 | .name = "matrix-keypad", |
| 272 | .id = -1, | 398 | .id = -1, |
| 399 | .dev = { | ||
| 400 | .platform_data = &corgikbd_pdata, | ||
| 401 | }, | ||
| 273 | }; | 402 | }; |
| 274 | 403 | ||
| 275 | /* | 404 | /* |
| @@ -307,111 +436,20 @@ static struct platform_device corgiled_device = { | |||
| 307 | * The card detect interrupt isn't debounced so we delay it by 250ms | 436 | * The card detect interrupt isn't debounced so we delay it by 250ms |
| 308 | * to give the card a chance to fully insert/eject. | 437 | * to give the card a chance to fully insert/eject. |
| 309 | */ | 438 | */ |
| 310 | static struct pxamci_platform_data corgi_mci_platform_data; | ||
| 311 | |||
| 312 | static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data) | ||
| 313 | { | ||
| 314 | int err; | ||
| 315 | |||
| 316 | err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT"); | ||
| 317 | if (err) | ||
| 318 | goto err_out; | ||
| 319 | |||
| 320 | err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP"); | ||
| 321 | if (err) | ||
| 322 | goto err_free_1; | ||
| 323 | |||
| 324 | err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR"); | ||
| 325 | if (err) | ||
| 326 | goto err_free_2; | ||
| 327 | |||
| 328 | gpio_direction_input(CORGI_GPIO_nSD_DETECT); | ||
| 329 | gpio_direction_input(CORGI_GPIO_nSD_WP); | ||
| 330 | gpio_direction_output(CORGI_GPIO_SD_PWR, 0); | ||
| 331 | |||
| 332 | corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 333 | |||
| 334 | err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, | ||
| 335 | IRQF_DISABLED | IRQF_TRIGGER_RISING | | ||
| 336 | IRQF_TRIGGER_FALLING, | ||
| 337 | "MMC card detect", data); | ||
| 338 | if (err) { | ||
| 339 | pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", | ||
| 340 | __func__); | ||
| 341 | goto err_free_3; | ||
| 342 | } | ||
| 343 | return 0; | ||
| 344 | |||
| 345 | err_free_3: | ||
| 346 | gpio_free(CORGI_GPIO_SD_PWR); | ||
| 347 | err_free_2: | ||
| 348 | gpio_free(CORGI_GPIO_nSD_WP); | ||
| 349 | err_free_1: | ||
| 350 | gpio_free(CORGI_GPIO_nSD_DETECT); | ||
| 351 | err_out: | ||
| 352 | return err; | ||
| 353 | } | ||
| 354 | |||
| 355 | static void corgi_mci_setpower(struct device *dev, unsigned int vdd) | ||
| 356 | { | ||
| 357 | struct pxamci_platform_data* p_d = dev->platform_data; | ||
| 358 | |||
| 359 | gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask)); | ||
| 360 | } | ||
| 361 | |||
| 362 | static int corgi_mci_get_ro(struct device *dev) | ||
| 363 | { | ||
| 364 | return gpio_get_value(CORGI_GPIO_nSD_WP); | ||
| 365 | } | ||
| 366 | |||
| 367 | static void corgi_mci_exit(struct device *dev, void *data) | ||
| 368 | { | ||
| 369 | free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data); | ||
| 370 | gpio_free(CORGI_GPIO_SD_PWR); | ||
| 371 | gpio_free(CORGI_GPIO_nSD_WP); | ||
| 372 | gpio_free(CORGI_GPIO_nSD_DETECT); | ||
| 373 | } | ||
| 374 | |||
| 375 | static struct pxamci_platform_data corgi_mci_platform_data = { | 439 | static struct pxamci_platform_data corgi_mci_platform_data = { |
| 376 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 440 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 377 | .init = corgi_mci_init, | 441 | .gpio_card_detect = -1, |
| 378 | .get_ro = corgi_mci_get_ro, | 442 | .gpio_card_ro = CORGI_GPIO_nSD_WP, |
| 379 | .setpower = corgi_mci_setpower, | 443 | .gpio_power = CORGI_GPIO_SD_PWR, |
| 380 | .exit = corgi_mci_exit, | ||
| 381 | }; | 444 | }; |
| 382 | 445 | ||
| 383 | 446 | ||
| 384 | /* | 447 | /* |
| 385 | * Irda | 448 | * Irda |
| 386 | */ | 449 | */ |
| 387 | static void corgi_irda_transceiver_mode(struct device *dev, int mode) | ||
| 388 | { | ||
| 389 | gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF); | ||
| 390 | pxa2xx_transceiver_mode(dev, mode); | ||
| 391 | } | ||
| 392 | |||
| 393 | static int corgi_irda_startup(struct device *dev) | ||
| 394 | { | ||
| 395 | int err; | ||
| 396 | |||
| 397 | err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON"); | ||
| 398 | if (err) | ||
| 399 | return err; | ||
| 400 | |||
| 401 | gpio_direction_output(CORGI_GPIO_IR_ON, 1); | ||
| 402 | return 0; | ||
| 403 | } | ||
| 404 | |||
| 405 | static void corgi_irda_shutdown(struct device *dev) | ||
| 406 | { | ||
| 407 | gpio_free(CORGI_GPIO_IR_ON); | ||
| 408 | } | ||
| 409 | |||
| 410 | static struct pxaficp_platform_data corgi_ficp_platform_data = { | 450 | static struct pxaficp_platform_data corgi_ficp_platform_data = { |
| 451 | .gpio_pwdown = CORGI_GPIO_IR_ON, | ||
| 411 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 452 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 412 | .transceiver_mode = corgi_irda_transceiver_mode, | ||
| 413 | .startup = corgi_irda_startup, | ||
| 414 | .shutdown = corgi_irda_shutdown, | ||
| 415 | }; | 453 | }; |
| 416 | 454 | ||
| 417 | 455 | ||
| @@ -636,6 +674,7 @@ static void __init corgi_init(void) | |||
| 636 | corgi_init_spi(); | 674 | corgi_init_spi(); |
| 637 | 675 | ||
| 638 | pxa_set_udc_info(&udc_info); | 676 | pxa_set_udc_info(&udc_info); |
| 677 | corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 639 | pxa_set_mci_info(&corgi_mci_platform_data); | 678 | pxa_set_mci_info(&corgi_mci_platform_data); |
| 640 | pxa_set_ficp_info(&corgi_ficp_platform_data); | 679 | pxa_set_ficp_info(&corgi_ficp_platform_data); |
| 641 | pxa_set_i2c_info(NULL); | 680 | pxa_set_i2c_info(NULL); |
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 7d3e1b46e550..79141f862728 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c | |||
| @@ -130,61 +130,17 @@ static struct pxamci_platform_data csb726_mci_data; | |||
| 130 | static int csb726_mci_init(struct device *dev, | 130 | static int csb726_mci_init(struct device *dev, |
| 131 | irq_handler_t detect, void *data) | 131 | irq_handler_t detect, void *data) |
| 132 | { | 132 | { |
| 133 | int err; | ||
| 134 | |||
| 135 | csb726_mci_data.detect_delay = msecs_to_jiffies(500); | 133 | csb726_mci_data.detect_delay = msecs_to_jiffies(500); |
| 136 | |||
| 137 | err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect"); | ||
| 138 | if (err) | ||
| 139 | goto err_det_req; | ||
| 140 | |||
| 141 | err = gpio_direction_input(CSB726_GPIO_MMC_DETECT); | ||
| 142 | if (err) | ||
| 143 | goto err_det_dir; | ||
| 144 | |||
| 145 | err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro"); | ||
| 146 | if (err) | ||
| 147 | goto err_ro_req; | ||
| 148 | |||
| 149 | err = gpio_direction_input(CSB726_GPIO_MMC_RO); | ||
| 150 | if (err) | ||
| 151 | goto err_ro_dir; | ||
| 152 | |||
| 153 | err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect, | ||
| 154 | IRQF_DISABLED, "MMC card detect", data); | ||
| 155 | if (err) | ||
| 156 | goto err_irq; | ||
| 157 | |||
| 158 | return 0; | 134 | return 0; |
| 159 | |||
| 160 | err_irq: | ||
| 161 | err_ro_dir: | ||
| 162 | gpio_free(CSB726_GPIO_MMC_RO); | ||
| 163 | err_ro_req: | ||
| 164 | err_det_dir: | ||
| 165 | gpio_free(CSB726_GPIO_MMC_DETECT); | ||
| 166 | err_det_req: | ||
| 167 | return err; | ||
| 168 | } | ||
| 169 | |||
| 170 | static int csb726_mci_get_ro(struct device *dev) | ||
| 171 | { | ||
| 172 | return gpio_get_value(CSB726_GPIO_MMC_RO); | ||
| 173 | } | ||
| 174 | |||
| 175 | static void csb726_mci_exit(struct device *dev, void *data) | ||
| 176 | { | ||
| 177 | free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data); | ||
| 178 | gpio_free(CSB726_GPIO_MMC_RO); | ||
| 179 | gpio_free(CSB726_GPIO_MMC_DETECT); | ||
| 180 | } | 135 | } |
| 181 | 136 | ||
| 182 | static struct pxamci_platform_data csb726_mci = { | 137 | static struct pxamci_platform_data csb726_mci = { |
| 183 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 138 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 184 | .init = csb726_mci_init, | 139 | .init = csb726_mci_init, |
| 185 | .get_ro = csb726_mci_get_ro, | ||
| 186 | /* FIXME setpower */ | 140 | /* FIXME setpower */ |
| 187 | .exit = csb726_mci_exit, | 141 | .gpio_card_detect = CSB726_GPIO_MMC_DETECT, |
| 142 | .gpio_card_ro = CSB726_GPIO_MMC_RO, | ||
| 143 | .gpio_power = -1, | ||
| 188 | }; | 144 | }; |
| 189 | 145 | ||
| 190 | static struct pxaohci_platform_data csb726_ohci_platform_data = { | 146 | static struct pxaohci_platform_data csb726_ohci_platform_data = { |
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index ecc08f360b68..46fabe1cca11 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c | |||
| @@ -935,6 +935,33 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info) | |||
| 935 | { | 935 | { |
| 936 | pxa_register_device(&pxa3xx_device_nand, info); | 936 | pxa_register_device(&pxa3xx_device_nand, info); |
| 937 | } | 937 | } |
| 938 | |||
| 939 | static struct resource pxa3xx_resources_gcu[] = { | ||
| 940 | { | ||
| 941 | .start = 0x54000000, | ||
| 942 | .end = 0x54000fff, | ||
| 943 | .flags = IORESOURCE_MEM, | ||
| 944 | }, | ||
| 945 | { | ||
| 946 | .start = IRQ_GCU, | ||
| 947 | .end = IRQ_GCU, | ||
| 948 | .flags = IORESOURCE_IRQ, | ||
| 949 | }, | ||
| 950 | }; | ||
| 951 | |||
| 952 | static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32); | ||
| 953 | |||
| 954 | struct platform_device pxa3xx_device_gcu = { | ||
| 955 | .name = "pxa3xx-gcu", | ||
| 956 | .id = -1, | ||
| 957 | .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu), | ||
| 958 | .resource = pxa3xx_resources_gcu, | ||
| 959 | .dev = { | ||
| 960 | .dma_mask = &pxa3xx_gcu_dmamask, | ||
| 961 | .coherent_dma_mask = 0xffffffff, | ||
| 962 | }, | ||
| 963 | }; | ||
| 964 | |||
| 938 | #endif /* CONFIG_PXA3xx */ | 965 | #endif /* CONFIG_PXA3xx */ |
| 939 | 966 | ||
| 940 | /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. | 967 | /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. |
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index ecc24a4dca6d..93817d99761e 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h | |||
| @@ -35,4 +35,6 @@ extern struct platform_device pxa27x_device_pwm1; | |||
| 35 | extern struct platform_device pxa3xx_device_nand; | 35 | extern struct platform_device pxa3xx_device_nand; |
| 36 | extern struct platform_device pxa3xx_device_i2c_power; | 36 | extern struct platform_device pxa3xx_device_i2c_power; |
| 37 | 37 | ||
| 38 | extern struct platform_device pxa3xx_device_gcu; | ||
| 39 | |||
| 38 | void __init pxa_register_device(struct platform_device *dev, void *data); | 40 | void __init pxa_register_device(struct platform_device *dev, void *data); |
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index a36fc17f671d..49acdfa6650d 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c | |||
| @@ -199,7 +199,6 @@ static void __init e740_init(void) | |||
| 199 | platform_add_devices(devices, ARRAY_SIZE(devices)); | 199 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
| 200 | pxa_set_udc_info(&e7xx_udc_mach_info); | 200 | pxa_set_udc_info(&e7xx_udc_mach_info); |
| 201 | pxa_set_ac97_info(NULL); | 201 | pxa_set_ac97_info(NULL); |
| 202 | e7xx_irda_init(); | ||
| 203 | pxa_set_ficp_info(&e7xx_ficp_platform_data); | 202 | pxa_set_ficp_info(&e7xx_ficp_platform_data); |
| 204 | } | 203 | } |
| 205 | 204 | ||
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 1d00110590e5..4052ece3ef49 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c | |||
| @@ -200,7 +200,6 @@ static void __init e750_init(void) | |||
| 200 | platform_add_devices(devices, ARRAY_SIZE(devices)); | 200 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
| 201 | pxa_set_udc_info(&e7xx_udc_mach_info); | 201 | pxa_set_udc_info(&e7xx_udc_mach_info); |
| 202 | pxa_set_ac97_info(NULL); | 202 | pxa_set_ac97_info(NULL); |
| 203 | e7xx_irda_init(); | ||
| 204 | pxa_set_ficp_info(&e7xx_ficp_platform_data); | 203 | pxa_set_ficp_info(&e7xx_ficp_platform_data); |
| 205 | } | 204 | } |
| 206 | 205 | ||
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 9cd09465a0e8..aec7f4214b14 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c | |||
| @@ -646,13 +646,16 @@ static int em_x270_mci_get_ro(struct device *dev) | |||
| 646 | } | 646 | } |
| 647 | 647 | ||
| 648 | static struct pxamci_platform_data em_x270_mci_platform_data = { | 648 | static struct pxamci_platform_data em_x270_mci_platform_data = { |
| 649 | .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| | 649 | .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| |
| 650 | MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| | 650 | MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| |
| 651 | MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| | 651 | MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| |
| 652 | MMC_VDD_30_31|MMC_VDD_31_32, | 652 | MMC_VDD_30_31|MMC_VDD_31_32, |
| 653 | .init = em_x270_mci_init, | 653 | .init = em_x270_mci_init, |
| 654 | .setpower = em_x270_mci_setpower, | 654 | .setpower = em_x270_mci_setpower, |
| 655 | .exit = em_x270_mci_exit, | 655 | .exit = em_x270_mci_exit, |
| 656 | .gpio_card_detect = -1, | ||
| 657 | .gpio_card_ro = -1, | ||
| 658 | .gpio_power = -1, | ||
| 656 | }; | 659 | }; |
| 657 | 660 | ||
| 658 | static void __init em_x270_init_mmc(void) | 661 | static void __init em_x270_init_mmc(void) |
| @@ -1022,22 +1025,32 @@ static int em_x270_sensor_power(struct device *dev, int on) | |||
| 1022 | return 0; | 1025 | return 0; |
| 1023 | } | 1026 | } |
| 1024 | 1027 | ||
| 1025 | static struct soc_camera_link iclink = { | ||
| 1026 | .bus_id = 0, | ||
| 1027 | .power = em_x270_sensor_power, | ||
| 1028 | }; | ||
| 1029 | |||
| 1030 | static struct i2c_board_info em_x270_i2c_cam_info[] = { | 1028 | static struct i2c_board_info em_x270_i2c_cam_info[] = { |
| 1031 | { | 1029 | { |
| 1032 | I2C_BOARD_INFO("mt9m111", 0x48), | 1030 | I2C_BOARD_INFO("mt9m111", 0x48), |
| 1031 | }, | ||
| 1032 | }; | ||
| 1033 | |||
| 1034 | static struct soc_camera_link iclink = { | ||
| 1035 | .bus_id = 0, | ||
| 1036 | .power = em_x270_sensor_power, | ||
| 1037 | .board_info = &em_x270_i2c_cam_info[0], | ||
| 1038 | .i2c_adapter_id = 0, | ||
| 1039 | .module_name = "mt9m111", | ||
| 1040 | }; | ||
| 1041 | |||
| 1042 | static struct platform_device em_x270_camera = { | ||
| 1043 | .name = "soc-camera-pdrv", | ||
| 1044 | .id = -1, | ||
| 1045 | .dev = { | ||
| 1033 | .platform_data = &iclink, | 1046 | .platform_data = &iclink, |
| 1034 | }, | 1047 | }, |
| 1035 | }; | 1048 | }; |
| 1036 | 1049 | ||
| 1037 | static void __init em_x270_init_camera(void) | 1050 | static void __init em_x270_init_camera(void) |
| 1038 | { | 1051 | { |
| 1039 | i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); | ||
| 1040 | pxa_set_camera_info(&em_x270_camera_platform_data); | 1052 | pxa_set_camera_info(&em_x270_camera_platform_data); |
| 1053 | platform_device_register(&em_x270_camera); | ||
| 1041 | } | 1054 | } |
| 1042 | #else | 1055 | #else |
| 1043 | static inline void em_x270_init_camera(void) {} | 1056 | static inline void em_x270_init_camera(void) {} |
| @@ -1103,6 +1116,7 @@ REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); | |||
| 1103 | REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); | 1116 | REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); |
| 1104 | REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); | 1117 | REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); |
| 1105 | REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs"); | 1118 | REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs"); |
| 1119 | REGULATOR_CONSUMER(buck2, NULL, "vcc_core"); | ||
| 1106 | 1120 | ||
| 1107 | #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ | 1121 | #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ |
| 1108 | static struct regulator_init_data _ldo##_data = { \ | 1122 | static struct regulator_init_data _ldo##_data = { \ |
| @@ -1125,6 +1139,7 @@ REGULATOR_INIT(ldo10, 2000000, 3200000, | |||
| 1125 | REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); | 1139 | REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); |
| 1126 | REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); | 1140 | REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); |
| 1127 | REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); | 1141 | REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); |
| 1142 | REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE); | ||
| 1128 | 1143 | ||
| 1129 | struct led_info em_x270_led_info = { | 1144 | struct led_info em_x270_led_info = { |
| 1130 | .name = "em-x270:orange", | 1145 | .name = "em-x270:orange", |
| @@ -1194,6 +1209,8 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = { | |||
| 1194 | DA9030_LDO(12), | 1209 | DA9030_LDO(12), |
| 1195 | DA9030_LDO(19), | 1210 | DA9030_LDO(19), |
| 1196 | 1211 | ||
| 1212 | DA9030_SUBDEV(regulator, BUCK2, &buck2_data), | ||
| 1213 | |||
| 1197 | DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), | 1214 | DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), |
| 1198 | DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), | 1215 | DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), |
| 1199 | DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), | 1216 | DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), |
| @@ -1245,7 +1262,6 @@ static void __init em_x270_init_i2c(void) | |||
| 1245 | 1262 | ||
| 1246 | static void __init em_x270_module_init(void) | 1263 | static void __init em_x270_module_init(void) |
| 1247 | { | 1264 | { |
| 1248 | pr_info("%s\n", __func__); | ||
| 1249 | pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); | 1265 | pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); |
| 1250 | 1266 | ||
| 1251 | mmc_cd = GPIO13_MMC_CD; | 1267 | mmc_cd = GPIO13_MMC_CD; |
| @@ -1257,7 +1273,6 @@ static void __init em_x270_module_init(void) | |||
| 1257 | 1273 | ||
| 1258 | static void __init em_x270_exeda_init(void) | 1274 | static void __init em_x270_exeda_init(void) |
| 1259 | { | 1275 | { |
| 1260 | pr_info("%s\n", __func__); | ||
| 1261 | pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); | 1276 | pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); |
| 1262 | 1277 | ||
| 1263 | mmc_cd = GPIO114_MMC_CD; | 1278 | mmc_cd = GPIO114_MMC_CD; |
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index c60dadf847a6..91417f035069 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c | |||
| @@ -47,44 +47,9 @@ struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { | |||
| 47 | .gpio_pullup_inverted = 1 | 47 | .gpio_pullup_inverted = 1 |
| 48 | }; | 48 | }; |
| 49 | 49 | ||
| 50 | static void e7xx_irda_transceiver_mode(struct device *dev, int mode) | ||
| 51 | { | ||
| 52 | if (mode & IR_OFF) { | ||
| 53 | gpio_set_value(GPIO_E7XX_IR_OFF, 1); | ||
| 54 | pxa2xx_transceiver_mode(dev, mode); | ||
| 55 | } else { | ||
| 56 | pxa2xx_transceiver_mode(dev, mode); | ||
| 57 | gpio_set_value(GPIO_E7XX_IR_OFF, 0); | ||
| 58 | } | ||
| 59 | } | ||
| 60 | |||
| 61 | int e7xx_irda_init(void) | ||
| 62 | { | ||
| 63 | int ret; | ||
| 64 | |||
| 65 | ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power"); | ||
| 66 | if (ret) | ||
| 67 | goto out; | ||
| 68 | |||
| 69 | ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0); | ||
| 70 | if (ret) | ||
| 71 | goto out; | ||
| 72 | |||
| 73 | e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF); | ||
| 74 | out: | ||
| 75 | return ret; | ||
| 76 | } | ||
| 77 | |||
| 78 | static void e7xx_irda_shutdown(struct device *dev) | ||
| 79 | { | ||
| 80 | e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); | ||
| 81 | gpio_free(GPIO_E7XX_IR_OFF); | ||
| 82 | } | ||
| 83 | |||
| 84 | struct pxaficp_platform_data e7xx_ficp_platform_data = { | 50 | struct pxaficp_platform_data e7xx_ficp_platform_data = { |
| 85 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 51 | .gpio_pwdown = GPIO_E7XX_IR_OFF, |
| 86 | .transceiver_mode = e7xx_irda_transceiver_mode, | 52 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 87 | .shutdown = e7xx_irda_shutdown, | ||
| 88 | }; | 53 | }; |
| 89 | 54 | ||
| 90 | int eseries_tmio_enable(struct platform_device *dev) | 55 | int eseries_tmio_enable(struct platform_device *dev) |
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index ca9912ea78d9..1708c0109844 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c | |||
| @@ -88,7 +88,10 @@ static struct platform_device *devices[] __initdata = { | |||
| 88 | 88 | ||
| 89 | #ifdef CONFIG_MMC_PXA | 89 | #ifdef CONFIG_MMC_PXA |
| 90 | static struct pxamci_platform_data gumstix_mci_platform_data = { | 90 | static struct pxamci_platform_data gumstix_mci_platform_data = { |
| 91 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 91 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 92 | .gpio_card_detect = -1, | ||
| 93 | .gpio_card_ro = -1, | ||
| 94 | .gpio_power = -1, | ||
| 92 | }; | 95 | }; |
| 93 | 96 | ||
| 94 | static void __init gumstix_mmc_init(void) | 97 | static void __init gumstix_mmc_init(void) |
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 81359d574f88..abff9e132749 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c | |||
| @@ -45,6 +45,7 @@ | |||
| 45 | #include <mach/irda.h> | 45 | #include <mach/irda.h> |
| 46 | #include <mach/pxa2xx_spi.h> | 46 | #include <mach/pxa2xx_spi.h> |
| 47 | 47 | ||
| 48 | #include <video/platform_lcd.h> | ||
| 48 | #include <video/w100fb.h> | 49 | #include <video/w100fb.h> |
| 49 | 50 | ||
| 50 | #include "devices.h" | 51 | #include "devices.h" |
| @@ -174,14 +175,9 @@ static int hx4700_gpio_request(struct gpio_ress *gpios, int size) | |||
| 174 | * IRDA | 175 | * IRDA |
| 175 | */ | 176 | */ |
| 176 | 177 | ||
| 177 | static void irda_transceiver_mode(struct device *dev, int mode) | ||
| 178 | { | ||
| 179 | gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF); | ||
| 180 | } | ||
| 181 | |||
| 182 | static struct pxaficp_platform_data ficp_info = { | 178 | static struct pxaficp_platform_data ficp_info = { |
| 183 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 179 | .gpio_pwdown = GPIO105_HX4700_nIR_ON, |
| 184 | .transceiver_mode = irda_transceiver_mode, | 180 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 185 | }; | 181 | }; |
| 186 | 182 | ||
| 187 | /* | 183 | /* |
| @@ -368,8 +364,6 @@ static struct platform_device egpio = { | |||
| 368 | * LCD - Sony display connected to ATI Imageon w3220 | 364 | * LCD - Sony display connected to ATI Imageon w3220 |
| 369 | */ | 365 | */ |
| 370 | 366 | ||
| 371 | static int lcd_power; | ||
| 372 | |||
| 373 | static void sony_lcd_init(void) | 367 | static void sony_lcd_init(void) |
| 374 | { | 368 | { |
| 375 | gpio_set_value(GPIO84_HX4700_LCD_SQN, 1); | 369 | gpio_set_value(GPIO84_HX4700_LCD_SQN, 1); |
| @@ -410,35 +404,6 @@ static void sony_lcd_off(void) | |||
| 410 | gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); | 404 | gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); |
| 411 | } | 405 | } |
| 412 | 406 | ||
| 413 | static int hx4700_lcd_set_power(struct lcd_device *ldev, int level) | ||
| 414 | { | ||
| 415 | switch (level) { | ||
| 416 | case FB_BLANK_UNBLANK: | ||
| 417 | sony_lcd_init(); | ||
| 418 | break; | ||
| 419 | case FB_BLANK_NORMAL: | ||
| 420 | case FB_BLANK_VSYNC_SUSPEND: | ||
| 421 | case FB_BLANK_HSYNC_SUSPEND: | ||
| 422 | case FB_BLANK_POWERDOWN: | ||
| 423 | sony_lcd_off(); | ||
| 424 | break; | ||
| 425 | } | ||
| 426 | lcd_power = level; | ||
| 427 | return 0; | ||
| 428 | } | ||
| 429 | |||
| 430 | static int hx4700_lcd_get_power(struct lcd_device *lm) | ||
| 431 | { | ||
| 432 | return lcd_power; | ||
| 433 | } | ||
| 434 | |||
| 435 | static struct lcd_ops hx4700_lcd_ops = { | ||
| 436 | .get_power = hx4700_lcd_get_power, | ||
| 437 | .set_power = hx4700_lcd_set_power, | ||
| 438 | }; | ||
| 439 | |||
| 440 | static struct lcd_device *hx4700_lcd_device; | ||
| 441 | |||
| 442 | #ifdef CONFIG_PM | 407 | #ifdef CONFIG_PM |
| 443 | static void w3220_lcd_suspend(struct w100fb_par *wfb) | 408 | static void w3220_lcd_suspend(struct w100fb_par *wfb) |
| 444 | { | 409 | { |
| @@ -573,6 +538,27 @@ static struct platform_device w3220 = { | |||
| 573 | .resource = w3220_resources, | 538 | .resource = w3220_resources, |
| 574 | }; | 539 | }; |
| 575 | 540 | ||
| 541 | static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power) | ||
| 542 | { | ||
| 543 | if (power) | ||
| 544 | sony_lcd_init(); | ||
| 545 | else | ||
| 546 | sony_lcd_off(); | ||
| 547 | } | ||
| 548 | |||
| 549 | static struct plat_lcd_data hx4700_lcd_data = { | ||
| 550 | .set_power = hx4700_lcd_set_power, | ||
| 551 | }; | ||
| 552 | |||
| 553 | static struct platform_device hx4700_lcd = { | ||
| 554 | .name = "platform-lcd", | ||
| 555 | .id = -1, | ||
| 556 | .dev = { | ||
| 557 | .platform_data = &hx4700_lcd_data, | ||
| 558 | .parent = &w3220.dev, | ||
| 559 | }, | ||
| 560 | }; | ||
| 561 | |||
| 576 | /* | 562 | /* |
| 577 | * Backlight | 563 | * Backlight |
| 578 | */ | 564 | */ |
| @@ -872,9 +858,6 @@ static void __init hx4700_init(void) | |||
| 872 | pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); | 858 | pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); |
| 873 | spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); | 859 | spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); |
| 874 | 860 | ||
| 875 | hx4700_lcd_device = lcd_device_register("w100fb", NULL, | ||
| 876 | (void *)&w3220_info, &hx4700_lcd_ops); | ||
| 877 | |||
| 878 | gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0); | 861 | gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0); |
| 879 | mdelay(10); | 862 | mdelay(10); |
| 880 | gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); | 863 | gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); |
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index b6243b59d9be..b6486ef20b17 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c | |||
| @@ -168,7 +168,10 @@ static struct pxafb_mach_info sharp_lm8v31 = { | |||
| 168 | }; | 168 | }; |
| 169 | 169 | ||
| 170 | static struct pxamci_platform_data idp_mci_platform_data = { | 170 | static struct pxamci_platform_data idp_mci_platform_data = { |
| 171 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 171 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 172 | .gpio_card_detect = -1, | ||
| 173 | .gpio_card_ro = -1, | ||
| 174 | .gpio_power = -1, | ||
| 172 | }; | 175 | }; |
| 173 | 176 | ||
| 174 | static void __init idp_init(void) | 177 | static void __init idp_init(void) |
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 961807dc6467..2a4945db31c5 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c | |||
| @@ -389,6 +389,9 @@ static int imote2_mci_get_ro(struct device *dev) | |||
| 389 | static struct pxamci_platform_data imote2_mci_platform_data = { | 389 | static struct pxamci_platform_data imote2_mci_platform_data = { |
| 390 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ | 390 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ |
| 391 | .get_ro = imote2_mci_get_ro, | 391 | .get_ro = imote2_mci_get_ro, |
| 392 | .gpio_card_detect = -1, | ||
| 393 | .gpio_card_ro = -1, | ||
| 394 | .gpio_power = -1, | ||
| 392 | }; | 395 | }; |
| 393 | 396 | ||
| 394 | static struct mtd_partition imote2flash_partitions[] = { | 397 | static struct mtd_partition imote2flash_partitions[] = { |
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h new file mode 100644 index 000000000000..bfec09b1814b --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/balloon3.h | |||
| @@ -0,0 +1,134 @@ | |||
| 1 | /* | ||
| 2 | * linux/include/asm-arm/arch-pxa/balloon3.h | ||
| 3 | * | ||
| 4 | * Authors: Nick Bane and Wookey | ||
| 5 | * Created: Oct, 2005 | ||
| 6 | * Copyright: Toby Churchill Ltd | ||
| 7 | * Cribbed from mainstone.c, by Nicholas Pitre | ||
| 8 | * | ||
| 9 | * This program is free software; you can redistribute it and/or modify | ||
| 10 | * it under the terms of the GNU General Public License version 2 as | ||
| 11 | * published by the Free Software Foundation. | ||
| 12 | */ | ||
| 13 | |||
| 14 | #ifndef ASM_ARCH_BALLOON3_H | ||
| 15 | #define ASM_ARCH_BALLOON3_H | ||
| 16 | |||
| 17 | enum balloon3_features { | ||
| 18 | BALLOON3_FEATURE_OHCI, | ||
| 19 | BALLOON3_FEATURE_MMC, | ||
| 20 | BALLOON3_FEATURE_CF, | ||
| 21 | BALLOON3_FEATURE_AUDIO, | ||
| 22 | BALLOON3_FEATURE_TOPPOLY, | ||
| 23 | }; | ||
| 24 | |||
| 25 | #define BALLOON3_FPGA_PHYS PXA_CS4_PHYS | ||
| 26 | #define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ | ||
| 27 | #define BALLOON3_FPGA_LENGTH 0x01000000 | ||
| 28 | |||
| 29 | /* FPGA/CPLD registers */ | ||
| 30 | #define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008) | ||
| 31 | /* fixme - same for now */ | ||
| 32 | #define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008) | ||
| 33 | #define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) | ||
| 34 | /* fpga/cpld interrupt control register */ | ||
| 35 | #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C) | ||
| 36 | #define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) | ||
| 37 | #define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) | ||
| 38 | #define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c) | ||
| 39 | |||
| 40 | #define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000) | ||
| 41 | #define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004) | ||
| 42 | #define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c) | ||
| 43 | |||
| 44 | /* GPIOs for irqs */ | ||
| 45 | #define BALLOON3_GPIO_AUX_NIRQ (94) | ||
| 46 | #define BALLOON3_GPIO_CODEC_IRQ (95) | ||
| 47 | |||
| 48 | /* Timer and Idle LED locations */ | ||
| 49 | #define BALLOON3_GPIO_LED_NAND (9) | ||
| 50 | #define BALLOON3_GPIO_LED_IDLE (10) | ||
| 51 | |||
| 52 | /* backlight control */ | ||
| 53 | #define BALLOON3_GPIO_RUN_BACKLIGHT (99) | ||
| 54 | |||
| 55 | #define BALLOON3_GPIO_S0_CD (105) | ||
| 56 | |||
| 57 | /* FPGA Interrupt Mask/Acknowledge Register */ | ||
| 58 | #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */ | ||
| 59 | #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */ | ||
| 60 | |||
| 61 | /* CF Status Register */ | ||
| 62 | #define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */ | ||
| 63 | #define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1) | ||
| 64 | /* VDD sense / card status changed */ | ||
| 65 | |||
| 66 | /* CF control register (write) */ | ||
| 67 | #define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */ | ||
| 68 | #define BALLOON3_PCMCIA_ENABLE (1 << 1) | ||
| 69 | #define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2) | ||
| 70 | |||
| 71 | /* CPLD (and FPGA) interface definitions */ | ||
| 72 | #define CPLD_LCD0_DATA_SET 0x00 | ||
| 73 | #define CPLD_LCD0_DATA_CLR 0x10 | ||
| 74 | #define CPLD_LCD0_COMMAND_SET 0x01 | ||
| 75 | #define CPLD_LCD0_COMMAND_CLR 0x11 | ||
| 76 | #define CPLD_LCD1_DATA_SET 0x02 | ||
| 77 | #define CPLD_LCD1_DATA_CLR 0x12 | ||
| 78 | #define CPLD_LCD1_COMMAND_SET 0x03 | ||
| 79 | #define CPLD_LCD1_COMMAND_CLR 0x13 | ||
| 80 | |||
| 81 | #define CPLD_MISC_SET 0x07 | ||
| 82 | #define CPLD_MISC_CLR 0x17 | ||
| 83 | #define CPLD_MISC_LOON_NRESET_BIT 0 | ||
| 84 | #define CPLD_MISC_LOON_UNSUSP_BIT 1 | ||
| 85 | #define CPLD_MISC_RUN_5V_BIT 2 | ||
| 86 | #define CPLD_MISC_CHG_D0_BIT 3 | ||
| 87 | #define CPLD_MISC_CHG_D1_BIT 4 | ||
| 88 | #define CPLD_MISC_DAC_NCS_BIT 5 | ||
| 89 | |||
| 90 | #define CPLD_LCD_SET 0x08 | ||
| 91 | #define CPLD_LCD_CLR 0x18 | ||
| 92 | #define CPLD_LCD_BACKLIGHT_EN_0_BIT 0 | ||
| 93 | #define CPLD_LCD_BACKLIGHT_EN_1_BIT 1 | ||
| 94 | #define CPLD_LCD_LED_RED_BIT 4 | ||
| 95 | #define CPLD_LCD_LED_GREEN_BIT 5 | ||
| 96 | #define CPLD_LCD_NRESET_BIT 7 | ||
| 97 | |||
| 98 | #define CPLD_LCD_RO_SET 0x09 | ||
| 99 | #define CPLD_LCD_RO_CLR 0x19 | ||
| 100 | #define CPLD_LCD_RO_LCD0_nWAIT_BIT 0 | ||
| 101 | #define CPLD_LCD_RO_LCD1_nWAIT_BIT 1 | ||
| 102 | |||
| 103 | #define CPLD_SERIAL_SET 0x0a | ||
| 104 | #define CPLD_SERIAL_CLR 0x1a | ||
| 105 | #define CPLD_SERIAL_GSM_RI_BIT 0 | ||
| 106 | #define CPLD_SERIAL_GSM_CTS_BIT 1 | ||
| 107 | #define CPLD_SERIAL_GSM_DTR_BIT 2 | ||
| 108 | #define CPLD_SERIAL_LPR_CTS_BIT 3 | ||
| 109 | #define CPLD_SERIAL_TC232_CTS_BIT 4 | ||
| 110 | #define CPLD_SERIAL_TC232_DSR_BIT 5 | ||
| 111 | |||
| 112 | #define CPLD_SROUTING_SET 0x0b | ||
| 113 | #define CPLD_SROUTING_CLR 0x1b | ||
| 114 | #define CPLD_SROUTING_MSP430_LPR 0 | ||
| 115 | #define CPLD_SROUTING_MSP430_TC232 1 | ||
| 116 | #define CPLD_SROUTING_MSP430_GSM 2 | ||
| 117 | #define CPLD_SROUTING_LOON_LPR (0 << 4) | ||
| 118 | #define CPLD_SROUTING_LOON_TC232 (1 << 4) | ||
| 119 | #define CPLD_SROUTING_LOON_GSM (2 << 4) | ||
| 120 | |||
| 121 | #define CPLD_AROUTING_SET 0x0c | ||
| 122 | #define CPLD_AROUTING_CLR 0x1c | ||
| 123 | #define CPLD_AROUTING_MIC2PHONE_BIT 0 | ||
| 124 | #define CPLD_AROUTING_PHONE2INT_BIT 1 | ||
| 125 | #define CPLD_AROUTING_PHONE2EXT_BIT 2 | ||
| 126 | #define CPLD_AROUTING_LOONL2INT_BIT 3 | ||
| 127 | #define CPLD_AROUTING_LOONL2EXT_BIT 4 | ||
| 128 | #define CPLD_AROUTING_LOONR2PHONE_BIT 5 | ||
| 129 | #define CPLD_AROUTING_LOONR2INT_BIT 6 | ||
| 130 | #define CPLD_AROUTING_LOONR2EXT_BIT 7 | ||
| 131 | |||
| 132 | extern int balloon3_has(enum balloon3_features feature); | ||
| 133 | |||
| 134 | #endif | ||
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index a88d7caff0d1..811743c56147 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h | |||
| @@ -23,6 +23,12 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} | |||
| 23 | extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); | 23 | extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); |
| 24 | #endif | 24 | #endif |
| 25 | 25 | ||
| 26 | #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) | ||
| 27 | extern void colibri_pxa3xx_init_nand(void); | ||
| 28 | #else | ||
| 29 | static inline void colibri_pxa3xx_init_nand(void) {} | ||
| 30 | #endif | ||
| 31 | |||
| 26 | /* physical memory regions */ | 32 | /* physical memory regions */ |
| 27 | #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ | 33 | #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ |
| 28 | 34 | ||
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index f6b4bf3e73d2..241880608ac6 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S | |||
| @@ -24,34 +24,27 @@ | |||
| 24 | mov \tmp, \tmp, lsr #13 | 24 | mov \tmp, \tmp, lsr #13 |
| 25 | and \tmp, \tmp, #0x7 @ Core G | 25 | and \tmp, \tmp, #0x7 @ Core G |
| 26 | cmp \tmp, #1 | 26 | cmp \tmp, #1 |
| 27 | bhi 1004f | 27 | bhi 1002f |
| 28 | 28 | ||
| 29 | @ Core Generation 1 (PXA25x) | ||
| 29 | mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 | 30 | mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 |
| 30 | add \base, \base, #0x00d00000 | 31 | add \base, \base, #0x00d00000 |
| 31 | ldr \irqstat, [\base, #0] @ ICIP | 32 | ldr \irqstat, [\base, #0] @ ICIP |
| 32 | ldr \irqnr, [\base, #4] @ ICMR | 33 | ldr \irqnr, [\base, #4] @ ICMR |
| 33 | b 1002f | ||
| 34 | 34 | ||
| 35 | 1004: | ||
| 36 | mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2 | ||
| 37 | mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2 | ||
| 38 | ands \irqnr, \irqstat, \irqnr | 35 | ands \irqnr, \irqstat, \irqnr |
| 39 | beq 1003f | 36 | beq 1001f |
| 40 | rsb \irqstat, \irqnr, #0 | 37 | rsb \irqstat, \irqnr, #0 |
| 41 | and \irqstat, \irqstat, \irqnr | 38 | and \irqstat, \irqstat, \irqnr |
| 42 | clz \irqnr, \irqstat | 39 | clz \irqnr, \irqstat |
| 43 | rsb \irqnr, \irqnr, #31 | 40 | rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0)) |
| 44 | add \irqnr, \irqnr, #(32 + PXA_IRQ(0)) | ||
| 45 | b 1001f | 41 | b 1001f |
| 46 | 1003: | ||
| 47 | mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP | ||
| 48 | mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR | ||
| 49 | 1002: | 42 | 1002: |
| 50 | ands \irqnr, \irqstat, \irqnr | 43 | @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx) |
| 44 | mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP | ||
| 45 | tst \irqstat, #0x80000000 | ||
| 51 | beq 1001f | 46 | beq 1001f |
| 52 | rsb \irqstat, \irqnr, #0 | 47 | bic \irqstat, \irqstat, #0x80000000 |
| 53 | and \irqstat, \irqstat, \irqnr | 48 | mov \irqnr, \irqstat, lsr #16 |
| 54 | clz \irqnr, \irqstat | ||
| 55 | rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0)) | ||
| 56 | 1001: | 49 | 1001: |
| 57 | .endm | 50 | .endm |
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 16ab79547dae..aa3d9f70a08a 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h | |||
| @@ -197,6 +197,16 @@ | |||
| 197 | #define __cpu_is_pxa935(id) (0) | 197 | #define __cpu_is_pxa935(id) (0) |
| 198 | #endif | 198 | #endif |
| 199 | 199 | ||
| 200 | #ifdef CONFIG_CPU_PXA950 | ||
| 201 | #define __cpu_is_pxa950(id) \ | ||
| 202 | ({ \ | ||
| 203 | unsigned int _id = (id) >> 4 & 0xfff; \ | ||
| 204 | id == 0x697; \ | ||
| 205 | }) | ||
| 206 | #else | ||
| 207 | #define __cpu_is_pxa950(id) (0) | ||
| 208 | #endif | ||
| 209 | |||
| 200 | #define cpu_is_pxa210() \ | 210 | #define cpu_is_pxa210() \ |
| 201 | ({ \ | 211 | ({ \ |
| 202 | __cpu_is_pxa210(read_cpuid_id()); \ | 212 | __cpu_is_pxa210(read_cpuid_id()); \ |
| @@ -249,6 +259,13 @@ | |||
| 249 | __cpu_is_pxa935(id); \ | 259 | __cpu_is_pxa935(id); \ |
| 250 | }) | 260 | }) |
| 251 | 261 | ||
| 262 | #define cpu_is_pxa950() \ | ||
| 263 | ({ \ | ||
| 264 | unsigned int id = read_cpuid(CPUID_ID); \ | ||
| 265 | __cpu_is_pxa950(id); \ | ||
| 266 | }) | ||
| 267 | |||
| 268 | |||
| 252 | /* | 269 | /* |
| 253 | * CPUID Core Generation Bit | 270 | * CPUID Core Generation Bit |
| 254 | * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x | 271 | * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x |
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h index 0a50c3c763df..3cd41f77dda4 100644 --- a/arch/arm/mach-pxa/include/mach/irda.h +++ b/arch/arm/mach-pxa/include/mach/irda.h | |||
| @@ -12,6 +12,8 @@ struct pxaficp_platform_data { | |||
| 12 | void (*transceiver_mode)(struct device *dev, int mode); | 12 | void (*transceiver_mode)(struct device *dev, int mode); |
| 13 | int (*startup)(struct device *dev); | 13 | int (*startup)(struct device *dev); |
| 14 | void (*shutdown)(struct device *dev); | 14 | void (*shutdown)(struct device *dev); |
| 15 | int gpio_pwdown; /* powerdown GPIO for the IrDA chip */ | ||
| 16 | bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */ | ||
| 15 | }; | 17 | }; |
| 16 | 18 | ||
| 17 | extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); | 19 | extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); |
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 6a1d95993342..3677a9af9c87 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h | |||
| @@ -68,9 +68,10 @@ | |||
| 68 | #ifdef CONFIG_PXA3xx | 68 | #ifdef CONFIG_PXA3xx |
| 69 | #define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ | 69 | #define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ |
| 70 | #define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ | 70 | #define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ |
| 71 | #define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */ | ||
| 71 | #define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ | 72 | #define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ |
| 72 | #define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ | 73 | #define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ |
| 73 | #define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */ | 74 | #define IRQ_GCU PXA_IRQ(39) /* Graphics Controller */ |
| 74 | #define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ | 75 | #define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ |
| 75 | #define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ | 76 | #define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ |
| 76 | #define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ | 77 | #define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ |
| @@ -81,8 +82,31 @@ | |||
| 81 | #define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ | 82 | #define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ |
| 82 | #endif | 83 | #endif |
| 83 | 84 | ||
| 84 | #define PXA_GPIO_IRQ_BASE PXA_IRQ(64) | 85 | #ifdef CONFIG_CPU_PXA935 |
| 85 | #define PXA_GPIO_IRQ_NUM (128) | 86 | #define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */ |
| 87 | #define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */ | ||
| 88 | |||
| 89 | #define IRQ_MMC3_PXA935 PXA_IRQ(72) /* MMC3 Controller (PXA935) */ | ||
| 90 | #define IRQ_MMC4_PXA935 PXA_IRQ(73) /* MMC4 Controller (PXA935) */ | ||
| 91 | #define IRQ_MMC5_PXA935 PXA_IRQ(74) /* MMC5 Controller (PXA935) */ | ||
| 92 | |||
| 93 | #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ | ||
| 94 | #endif | ||
| 95 | |||
| 96 | #ifdef CONFIG_CPU_PXA930 | ||
| 97 | #define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */ | ||
| 98 | #define IRQ_ACIPC0 PXA_IRQ(5) | ||
| 99 | #define IRQ_ACIPC1 PXA_IRQ(40) | ||
| 100 | #define IRQ_ACIPC2 PXA_IRQ(19) | ||
| 101 | #define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball */ | ||
| 102 | #endif | ||
| 103 | |||
| 104 | #ifdef CONFIG_CPU_PXA950 | ||
| 105 | #define IRQ_GC500 PXA_IRQ(70) /* Graphics Controller (PXA950) */ | ||
| 106 | #endif | ||
| 107 | |||
| 108 | #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) | ||
| 109 | #define PXA_GPIO_IRQ_NUM (192) | ||
| 86 | 110 | ||
| 87 | #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) | 111 | #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) |
| 88 | #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) | 112 | #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) |
| @@ -105,6 +129,8 @@ | |||
| 105 | #define IRQ_BOARD_END (IRQ_BOARD_START + 70) | 129 | #define IRQ_BOARD_END (IRQ_BOARD_START + 70) |
| 106 | #elif defined(CONFIG_MACH_ZYLONITE) | 130 | #elif defined(CONFIG_MACH_ZYLONITE) |
| 107 | #define IRQ_BOARD_END (IRQ_BOARD_START + 32) | 131 | #define IRQ_BOARD_END (IRQ_BOARD_START + 32) |
| 132 | #elif defined(CONFIG_PXA_EZX) | ||
| 133 | #define IRQ_BOARD_END (IRQ_BOARD_START + 23) | ||
| 108 | #else | 134 | #else |
| 109 | #define IRQ_BOARD_END (IRQ_BOARD_START + 16) | 135 | #define IRQ_BOARD_END (IRQ_BOARD_START + 16) |
| 110 | #endif | 136 | #endif |
| @@ -237,6 +263,16 @@ | |||
| 237 | #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) | 263 | #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) |
| 238 | #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) | 264 | #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) |
| 239 | 265 | ||
| 266 | /* Balloon3 Interrupts */ | ||
| 267 | #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) | ||
| 268 | |||
| 269 | #define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) | ||
| 270 | #define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) | ||
| 271 | |||
| 272 | #define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) | ||
| 273 | #define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) | ||
| 274 | #define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) | ||
| 275 | |||
| 240 | /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ | 276 | /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ |
| 241 | #define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) | 277 | #define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) |
| 242 | #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) | 278 | #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) |
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h index 482185053a92..271e249ae34f 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/include/mach/mfp.h | |||
| @@ -16,305 +16,6 @@ | |||
| 16 | #ifndef __ASM_ARCH_MFP_H | 16 | #ifndef __ASM_ARCH_MFP_H |
| 17 | #define __ASM_ARCH_MFP_H | 17 | #define __ASM_ARCH_MFP_H |
| 18 | 18 | ||
| 19 | #define mfp_to_gpio(m) ((m) % 128) | 19 | #include <plat/mfp.h> |
| 20 | |||
| 21 | /* list of all the configurable MFP pins */ | ||
| 22 | enum { | ||
| 23 | MFP_PIN_INVALID = -1, | ||
| 24 | |||
| 25 | MFP_PIN_GPIO0 = 0, | ||
| 26 | MFP_PIN_GPIO1, | ||
| 27 | MFP_PIN_GPIO2, | ||
| 28 | MFP_PIN_GPIO3, | ||
| 29 | MFP_PIN_GPIO4, | ||
| 30 | MFP_PIN_GPIO5, | ||
| 31 | MFP_PIN_GPIO6, | ||
| 32 | MFP_PIN_GPIO7, | ||
| 33 | MFP_PIN_GPIO8, | ||
| 34 | MFP_PIN_GPIO9, | ||
| 35 | MFP_PIN_GPIO10, | ||
| 36 | MFP_PIN_GPIO11, | ||
| 37 | MFP_PIN_GPIO12, | ||
| 38 | MFP_PIN_GPIO13, | ||
| 39 | MFP_PIN_GPIO14, | ||
| 40 | MFP_PIN_GPIO15, | ||
| 41 | MFP_PIN_GPIO16, | ||
| 42 | MFP_PIN_GPIO17, | ||
| 43 | MFP_PIN_GPIO18, | ||
| 44 | MFP_PIN_GPIO19, | ||
| 45 | MFP_PIN_GPIO20, | ||
| 46 | MFP_PIN_GPIO21, | ||
| 47 | MFP_PIN_GPIO22, | ||
| 48 | MFP_PIN_GPIO23, | ||
| 49 | MFP_PIN_GPIO24, | ||
| 50 | MFP_PIN_GPIO25, | ||
| 51 | MFP_PIN_GPIO26, | ||
| 52 | MFP_PIN_GPIO27, | ||
| 53 | MFP_PIN_GPIO28, | ||
| 54 | MFP_PIN_GPIO29, | ||
| 55 | MFP_PIN_GPIO30, | ||
| 56 | MFP_PIN_GPIO31, | ||
| 57 | MFP_PIN_GPIO32, | ||
| 58 | MFP_PIN_GPIO33, | ||
| 59 | MFP_PIN_GPIO34, | ||
| 60 | MFP_PIN_GPIO35, | ||
| 61 | MFP_PIN_GPIO36, | ||
| 62 | MFP_PIN_GPIO37, | ||
| 63 | MFP_PIN_GPIO38, | ||
| 64 | MFP_PIN_GPIO39, | ||
| 65 | MFP_PIN_GPIO40, | ||
| 66 | MFP_PIN_GPIO41, | ||
| 67 | MFP_PIN_GPIO42, | ||
| 68 | MFP_PIN_GPIO43, | ||
| 69 | MFP_PIN_GPIO44, | ||
| 70 | MFP_PIN_GPIO45, | ||
| 71 | MFP_PIN_GPIO46, | ||
| 72 | MFP_PIN_GPIO47, | ||
| 73 | MFP_PIN_GPIO48, | ||
| 74 | MFP_PIN_GPIO49, | ||
| 75 | MFP_PIN_GPIO50, | ||
| 76 | MFP_PIN_GPIO51, | ||
| 77 | MFP_PIN_GPIO52, | ||
| 78 | MFP_PIN_GPIO53, | ||
| 79 | MFP_PIN_GPIO54, | ||
| 80 | MFP_PIN_GPIO55, | ||
| 81 | MFP_PIN_GPIO56, | ||
| 82 | MFP_PIN_GPIO57, | ||
| 83 | MFP_PIN_GPIO58, | ||
| 84 | MFP_PIN_GPIO59, | ||
| 85 | MFP_PIN_GPIO60, | ||
| 86 | MFP_PIN_GPIO61, | ||
| 87 | MFP_PIN_GPIO62, | ||
| 88 | MFP_PIN_GPIO63, | ||
| 89 | MFP_PIN_GPIO64, | ||
| 90 | MFP_PIN_GPIO65, | ||
| 91 | MFP_PIN_GPIO66, | ||
| 92 | MFP_PIN_GPIO67, | ||
| 93 | MFP_PIN_GPIO68, | ||
| 94 | MFP_PIN_GPIO69, | ||
| 95 | MFP_PIN_GPIO70, | ||
| 96 | MFP_PIN_GPIO71, | ||
| 97 | MFP_PIN_GPIO72, | ||
| 98 | MFP_PIN_GPIO73, | ||
| 99 | MFP_PIN_GPIO74, | ||
| 100 | MFP_PIN_GPIO75, | ||
| 101 | MFP_PIN_GPIO76, | ||
| 102 | MFP_PIN_GPIO77, | ||
| 103 | MFP_PIN_GPIO78, | ||
| 104 | MFP_PIN_GPIO79, | ||
| 105 | MFP_PIN_GPIO80, | ||
| 106 | MFP_PIN_GPIO81, | ||
| 107 | MFP_PIN_GPIO82, | ||
| 108 | MFP_PIN_GPIO83, | ||
| 109 | MFP_PIN_GPIO84, | ||
| 110 | MFP_PIN_GPIO85, | ||
| 111 | MFP_PIN_GPIO86, | ||
| 112 | MFP_PIN_GPIO87, | ||
| 113 | MFP_PIN_GPIO88, | ||
| 114 | MFP_PIN_GPIO89, | ||
| 115 | MFP_PIN_GPIO90, | ||
| 116 | MFP_PIN_GPIO91, | ||
| 117 | MFP_PIN_GPIO92, | ||
| 118 | MFP_PIN_GPIO93, | ||
| 119 | MFP_PIN_GPIO94, | ||
| 120 | MFP_PIN_GPIO95, | ||
| 121 | MFP_PIN_GPIO96, | ||
| 122 | MFP_PIN_GPIO97, | ||
| 123 | MFP_PIN_GPIO98, | ||
| 124 | MFP_PIN_GPIO99, | ||
| 125 | MFP_PIN_GPIO100, | ||
| 126 | MFP_PIN_GPIO101, | ||
| 127 | MFP_PIN_GPIO102, | ||
| 128 | MFP_PIN_GPIO103, | ||
| 129 | MFP_PIN_GPIO104, | ||
| 130 | MFP_PIN_GPIO105, | ||
| 131 | MFP_PIN_GPIO106, | ||
| 132 | MFP_PIN_GPIO107, | ||
| 133 | MFP_PIN_GPIO108, | ||
| 134 | MFP_PIN_GPIO109, | ||
| 135 | MFP_PIN_GPIO110, | ||
| 136 | MFP_PIN_GPIO111, | ||
| 137 | MFP_PIN_GPIO112, | ||
| 138 | MFP_PIN_GPIO113, | ||
| 139 | MFP_PIN_GPIO114, | ||
| 140 | MFP_PIN_GPIO115, | ||
| 141 | MFP_PIN_GPIO116, | ||
| 142 | MFP_PIN_GPIO117, | ||
| 143 | MFP_PIN_GPIO118, | ||
| 144 | MFP_PIN_GPIO119, | ||
| 145 | MFP_PIN_GPIO120, | ||
| 146 | MFP_PIN_GPIO121, | ||
| 147 | MFP_PIN_GPIO122, | ||
| 148 | MFP_PIN_GPIO123, | ||
| 149 | MFP_PIN_GPIO124, | ||
| 150 | MFP_PIN_GPIO125, | ||
| 151 | MFP_PIN_GPIO126, | ||
| 152 | MFP_PIN_GPIO127, | ||
| 153 | MFP_PIN_GPIO0_2, | ||
| 154 | MFP_PIN_GPIO1_2, | ||
| 155 | MFP_PIN_GPIO2_2, | ||
| 156 | MFP_PIN_GPIO3_2, | ||
| 157 | MFP_PIN_GPIO4_2, | ||
| 158 | MFP_PIN_GPIO5_2, | ||
| 159 | MFP_PIN_GPIO6_2, | ||
| 160 | MFP_PIN_GPIO7_2, | ||
| 161 | MFP_PIN_GPIO8_2, | ||
| 162 | MFP_PIN_GPIO9_2, | ||
| 163 | MFP_PIN_GPIO10_2, | ||
| 164 | MFP_PIN_GPIO11_2, | ||
| 165 | MFP_PIN_GPIO12_2, | ||
| 166 | MFP_PIN_GPIO13_2, | ||
| 167 | MFP_PIN_GPIO14_2, | ||
| 168 | MFP_PIN_GPIO15_2, | ||
| 169 | MFP_PIN_GPIO16_2, | ||
| 170 | MFP_PIN_GPIO17_2, | ||
| 171 | |||
| 172 | MFP_PIN_ULPI_STP, | ||
| 173 | MFP_PIN_ULPI_NXT, | ||
| 174 | MFP_PIN_ULPI_DIR, | ||
| 175 | |||
| 176 | MFP_PIN_nXCVREN, | ||
| 177 | MFP_PIN_DF_CLE_nOE, | ||
| 178 | MFP_PIN_DF_nADV1_ALE, | ||
| 179 | MFP_PIN_DF_SCLK_E, | ||
| 180 | MFP_PIN_DF_SCLK_S, | ||
| 181 | MFP_PIN_nBE0, | ||
| 182 | MFP_PIN_nBE1, | ||
| 183 | MFP_PIN_DF_nADV2_ALE, | ||
| 184 | MFP_PIN_DF_INT_RnB, | ||
| 185 | MFP_PIN_DF_nCS0, | ||
| 186 | MFP_PIN_DF_nCS1, | ||
| 187 | MFP_PIN_nLUA, | ||
| 188 | MFP_PIN_nLLA, | ||
| 189 | MFP_PIN_DF_nWE, | ||
| 190 | MFP_PIN_DF_ALE_nWE, | ||
| 191 | MFP_PIN_DF_nRE_nOE, | ||
| 192 | MFP_PIN_DF_ADDR0, | ||
| 193 | MFP_PIN_DF_ADDR1, | ||
| 194 | MFP_PIN_DF_ADDR2, | ||
| 195 | MFP_PIN_DF_ADDR3, | ||
| 196 | MFP_PIN_DF_IO0, | ||
| 197 | MFP_PIN_DF_IO1, | ||
| 198 | MFP_PIN_DF_IO2, | ||
| 199 | MFP_PIN_DF_IO3, | ||
| 200 | MFP_PIN_DF_IO4, | ||
| 201 | MFP_PIN_DF_IO5, | ||
| 202 | MFP_PIN_DF_IO6, | ||
| 203 | MFP_PIN_DF_IO7, | ||
| 204 | MFP_PIN_DF_IO8, | ||
| 205 | MFP_PIN_DF_IO9, | ||
| 206 | MFP_PIN_DF_IO10, | ||
| 207 | MFP_PIN_DF_IO11, | ||
| 208 | MFP_PIN_DF_IO12, | ||
| 209 | MFP_PIN_DF_IO13, | ||
| 210 | MFP_PIN_DF_IO14, | ||
| 211 | MFP_PIN_DF_IO15, | ||
| 212 | |||
| 213 | /* additional pins on PXA930 */ | ||
| 214 | MFP_PIN_GSIM_UIO, | ||
| 215 | MFP_PIN_GSIM_UCLK, | ||
| 216 | MFP_PIN_GSIM_UDET, | ||
| 217 | MFP_PIN_GSIM_nURST, | ||
| 218 | MFP_PIN_PMIC_INT, | ||
| 219 | MFP_PIN_RDY, | ||
| 220 | |||
| 221 | MFP_PIN_MAX, | ||
| 222 | }; | ||
| 223 | |||
| 224 | /* | ||
| 225 | * a possible MFP configuration is represented by a 32-bit integer | ||
| 226 | * | ||
| 227 | * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) | ||
| 228 | * bit 10..12 - Alternate Function Selection | ||
| 229 | * bit 13..15 - Drive Strength | ||
| 230 | * bit 16..18 - Low Power Mode State | ||
| 231 | * bit 19..20 - Low Power Mode Edge Detection | ||
| 232 | * bit 21..22 - Run Mode Pull State | ||
| 233 | * | ||
| 234 | * to facilitate the definition, the following macros are provided | ||
| 235 | * | ||
| 236 | * MFP_CFG_DEFAULT - default MFP configuration value, with | ||
| 237 | * alternate function = 0, | ||
| 238 | * drive strength = fast 3mA (MFP_DS03X) | ||
| 239 | * low power mode = default | ||
| 240 | * edge detection = none | ||
| 241 | * | ||
| 242 | * MFP_CFG - default MFPR value with alternate function | ||
| 243 | * MFP_CFG_DRV - default MFPR value with alternate function and | ||
| 244 | * pin drive strength | ||
| 245 | * MFP_CFG_LPM - default MFPR value with alternate function and | ||
| 246 | * low power mode | ||
| 247 | * MFP_CFG_X - default MFPR value with alternate function, | ||
| 248 | * pin drive strength and low power mode | ||
| 249 | */ | ||
| 250 | |||
| 251 | typedef unsigned long mfp_cfg_t; | ||
| 252 | |||
| 253 | #define MFP_PIN(x) ((x) & 0x3ff) | ||
| 254 | |||
| 255 | #define MFP_AF0 (0x0 << 10) | ||
| 256 | #define MFP_AF1 (0x1 << 10) | ||
| 257 | #define MFP_AF2 (0x2 << 10) | ||
| 258 | #define MFP_AF3 (0x3 << 10) | ||
| 259 | #define MFP_AF4 (0x4 << 10) | ||
| 260 | #define MFP_AF5 (0x5 << 10) | ||
| 261 | #define MFP_AF6 (0x6 << 10) | ||
| 262 | #define MFP_AF7 (0x7 << 10) | ||
| 263 | #define MFP_AF_MASK (0x7 << 10) | ||
| 264 | #define MFP_AF(x) (((x) >> 10) & 0x7) | ||
| 265 | |||
| 266 | #define MFP_DS01X (0x0 << 13) | ||
| 267 | #define MFP_DS02X (0x1 << 13) | ||
| 268 | #define MFP_DS03X (0x2 << 13) | ||
| 269 | #define MFP_DS04X (0x3 << 13) | ||
| 270 | #define MFP_DS06X (0x4 << 13) | ||
| 271 | #define MFP_DS08X (0x5 << 13) | ||
| 272 | #define MFP_DS10X (0x6 << 13) | ||
| 273 | #define MFP_DS13X (0x7 << 13) | ||
| 274 | #define MFP_DS_MASK (0x7 << 13) | ||
| 275 | #define MFP_DS(x) (((x) >> 13) & 0x7) | ||
| 276 | |||
| 277 | #define MFP_LPM_DEFAULT (0x0 << 16) | ||
| 278 | #define MFP_LPM_DRIVE_LOW (0x1 << 16) | ||
| 279 | #define MFP_LPM_DRIVE_HIGH (0x2 << 16) | ||
| 280 | #define MFP_LPM_PULL_LOW (0x3 << 16) | ||
| 281 | #define MFP_LPM_PULL_HIGH (0x4 << 16) | ||
| 282 | #define MFP_LPM_FLOAT (0x5 << 16) | ||
| 283 | #define MFP_LPM_INPUT (0x6 << 16) | ||
| 284 | #define MFP_LPM_STATE_MASK (0x7 << 16) | ||
| 285 | #define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) | ||
| 286 | |||
| 287 | #define MFP_LPM_EDGE_NONE (0x0 << 19) | ||
| 288 | #define MFP_LPM_EDGE_RISE (0x1 << 19) | ||
| 289 | #define MFP_LPM_EDGE_FALL (0x2 << 19) | ||
| 290 | #define MFP_LPM_EDGE_BOTH (0x3 << 19) | ||
| 291 | #define MFP_LPM_EDGE_MASK (0x3 << 19) | ||
| 292 | #define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) | ||
| 293 | |||
| 294 | #define MFP_PULL_NONE (0x0 << 21) | ||
| 295 | #define MFP_PULL_LOW (0x1 << 21) | ||
| 296 | #define MFP_PULL_HIGH (0x2 << 21) | ||
| 297 | #define MFP_PULL_BOTH (0x3 << 21) | ||
| 298 | #define MFP_PULL_MASK (0x3 << 21) | ||
| 299 | #define MFP_PULL(x) (((x) >> 21) & 0x3) | ||
| 300 | |||
| 301 | #define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ | ||
| 302 | MFP_LPM_EDGE_NONE | MFP_PULL_NONE) | ||
| 303 | |||
| 304 | #define MFP_CFG(pin, af) \ | ||
| 305 | ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ | ||
| 306 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) | ||
| 307 | |||
| 308 | #define MFP_CFG_DRV(pin, af, drv) \ | ||
| 309 | ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ | ||
| 310 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) | ||
| 311 | |||
| 312 | #define MFP_CFG_LPM(pin, af, lpm) \ | ||
| 313 | ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ | ||
| 314 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) | ||
| 315 | |||
| 316 | #define MFP_CFG_X(pin, af, drv, lpm) \ | ||
| 317 | ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ | ||
| 318 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) | ||
| 319 | 20 | ||
| 320 | #endif /* __ASM_ARCH_MFP_H */ | 21 | #endif /* __ASM_ARCH_MFP_H */ |
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h index 6d1304c9270f..02a69dc2ee63 100644 --- a/arch/arm/mach-pxa/include/mach/mmc.h +++ b/arch/arm/mach-pxa/include/mach/mmc.h | |||
| @@ -14,6 +14,11 @@ struct pxamci_platform_data { | |||
| 14 | int (*get_ro)(struct device *); | 14 | int (*get_ro)(struct device *); |
| 15 | void (*setpower)(struct device *, unsigned int); | 15 | void (*setpower)(struct device *, unsigned int); |
| 16 | void (*exit)(struct device *, void *); | 16 | void (*exit)(struct device *, void *); |
| 17 | int gpio_card_detect; /* gpio detecting card insertion */ | ||
| 18 | int gpio_card_ro; /* gpio detecting read only toggle */ | ||
| 19 | bool gpio_card_ro_invert; /* gpio ro is inverted */ | ||
| 20 | int gpio_power; /* gpio powering up MMC bus */ | ||
| 21 | bool gpio_power_invert; /* gpio power is inverted */ | ||
| 17 | }; | 22 | }; |
| 18 | 23 | ||
| 19 | extern void pxa_set_mci_info(struct pxamci_platform_data *info); | 24 | extern void pxa_set_mci_info(struct pxamci_platform_data *info); |
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h new file mode 100644 index 000000000000..3dc9b074ab46 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmtc.h | |||
| @@ -0,0 +1,86 @@ | |||
| 1 | /* | ||
| 2 | * linux/include/asm-arm/arch-pxa/palmtc-gpio.h | ||
| 3 | * | ||
| 4 | * GPIOs and interrupts for Palm Tungsten|C Handheld Computer | ||
| 5 | * | ||
| 6 | * Authors: Alex Osborne <bobofdoom@gmail.com> | ||
| 7 | * Marek Vasut <marek.vasut@gmail.com> | ||
| 8 | * Holger Bocklet <bitz.email@gmx.net> | ||
| 9 | * | ||
| 10 | * This program is free software; you can redistribute it and/or modify | ||
| 11 | * it under the terms of the GNU General Public License version 2 as | ||
| 12 | * published by the Free Software Foundation. | ||
| 13 | * | ||
| 14 | */ | ||
| 15 | |||
| 16 | #ifndef _INCLUDE_PALMTC_H_ | ||
| 17 | #define _INCLUDE_PALMTC_H_ | ||
| 18 | |||
| 19 | /** HERE ARE GPIOs **/ | ||
| 20 | |||
| 21 | /* GPIOs */ | ||
| 22 | #define GPIO_NR_PALMTC_EARPHONE_DETECT 2 | ||
| 23 | #define GPIO_NR_PALMTC_CRADLE_DETECT 5 | ||
| 24 | #define GPIO_NR_PALMTC_HOTSYNC_BUTTON 7 | ||
| 25 | |||
| 26 | /* SD/MMC */ | ||
| 27 | #define GPIO_NR_PALMTC_SD_DETECT_N 12 | ||
| 28 | #define GPIO_NR_PALMTC_SD_POWER 32 | ||
| 29 | #define GPIO_NR_PALMTC_SD_READONLY 54 | ||
| 30 | |||
| 31 | /* WLAN */ | ||
| 32 | #define GPIO_NR_PALMTC_PCMCIA_READY 13 | ||
| 33 | #define GPIO_NR_PALMTC_PCMCIA_PWRREADY 14 | ||
| 34 | #define GPIO_NR_PALMTC_PCMCIA_POWER1 15 | ||
| 35 | #define GPIO_NR_PALMTC_PCMCIA_POWER2 33 | ||
| 36 | #define GPIO_NR_PALMTC_PCMCIA_POWER3 55 | ||
| 37 | #define GPIO_NR_PALMTC_PCMCIA_RESET 78 | ||
| 38 | |||
| 39 | /* UDC */ | ||
| 40 | #define GPIO_NR_PALMTC_USB_DETECT_N 4 | ||
| 41 | #define GPIO_NR_PALMTC_USB_POWER 36 | ||
| 42 | |||
| 43 | /* LCD/BACKLIGHT */ | ||
| 44 | #define GPIO_NR_PALMTC_BL_POWER 16 | ||
| 45 | #define GPIO_NR_PALMTC_LCD_POWER 44 | ||
| 46 | #define GPIO_NR_PALMTC_LCD_BLANK 38 | ||
| 47 | |||
| 48 | /* UART */ | ||
| 49 | #define GPIO_NR_PALMTC_RS232_POWER 37 | ||
| 50 | |||
| 51 | /* IRDA */ | ||
| 52 | #define GPIO_NR_PALMTC_IR_DISABLE 45 | ||
| 53 | |||
| 54 | /* IRQs */ | ||
| 55 | #define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N) | ||
| 56 | #define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY) | ||
| 57 | |||
| 58 | /* UCB1400 GPIOs */ | ||
| 59 | #define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00) | ||
| 60 | #define GPIO_NR_PALMTC_HEADPHONE_DETECT (0x80 | 0x01) | ||
| 61 | #define GPIO_NR_PALMTC_SPEAKER_ENABLE (0x80 | 0x03) | ||
| 62 | #define GPIO_NR_PALMTC_VIBRA_POWER (0x80 | 0x05) | ||
| 63 | #define GPIO_NR_PALMTC_LED_POWER (0x80 | 0x07) | ||
| 64 | |||
| 65 | /** HERE ARE INIT VALUES **/ | ||
| 66 | #define PALMTC_UCB1400_GPIO_OFFSET 0x80 | ||
| 67 | |||
| 68 | /* BATTERY */ | ||
| 69 | #define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ | ||
| 70 | #define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ | ||
| 71 | #define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */ | ||
| 72 | #define PALMTC_BAT_MIN_CURRENT 0 /* unknown */ | ||
| 73 | #define PALMTC_BAT_MAX_CHARGE 1 /* unknown */ | ||
| 74 | #define PALMTC_BAT_MIN_CHARGE 1 /* unknown */ | ||
| 75 | #define PALMTC_MAX_LIFE_MINS 240 /* on-life in minutes */ | ||
| 76 | |||
| 77 | #define PALMTC_BAT_MEASURE_DELAY (HZ * 1) | ||
| 78 | |||
| 79 | /* BACKLIGHT */ | ||
| 80 | #define PALMTC_MAX_INTENSITY 0xFE | ||
| 81 | #define PALMTC_DEFAULT_INTENSITY 0x7E | ||
| 82 | #define PALMTC_LIMIT_MASK 0x7F | ||
| 83 | #define PALMTC_PRESCALER 0x3F | ||
| 84 | #define PALMTC_PERIOD_NS 3500 | ||
| 85 | |||
| 86 | #endif | ||
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index e74082c872e1..1be0db6ed55e 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h | |||
| @@ -82,6 +82,11 @@ | |||
| 82 | #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ | 82 | #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ |
| 83 | #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ | 83 | #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ |
| 84 | 84 | ||
| 85 | #define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24)) | ||
| 86 | #define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25)) | ||
| 87 | #define PALMTX_NAND_ALE_VIRT 0xff100000 | ||
| 88 | #define PALMTX_NAND_CLE_VIRT 0xff200000 | ||
| 89 | |||
| 85 | /* TOUCHSCREEN */ | 90 | /* TOUCHSCREEN */ |
| 86 | #define AC97_LINK_FRAME 21 | 91 | #define AC97_LINK_FRAME 21 |
| 87 | 92 | ||
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index 7d1a059b3d43..e91d63cfe811 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | |||
| @@ -208,7 +208,7 @@ | |||
| 208 | #define CKEN_MVED 43 /* < MVED clock enable */ | 208 | #define CKEN_MVED 43 /* < MVED clock enable */ |
| 209 | 209 | ||
| 210 | /* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ | 210 | /* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ |
| 211 | #define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ | 211 | #define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */ |
| 212 | #define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ | 212 | #define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */ |
| 213 | 213 | ||
| 214 | #endif /* __ASM_ARCH_PXA3XX_REGS_H */ | 214 | #endif /* __ASM_ARCH_PXA3XX_REGS_H */ |
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 6932720ba04e..f73061c90b5e 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h | |||
| @@ -118,7 +118,8 @@ struct pxafb_mach_info { | |||
| 118 | u_int fixed_modes:1, | 118 | u_int fixed_modes:1, |
| 119 | cmap_inverse:1, | 119 | cmap_inverse:1, |
| 120 | cmap_static:1, | 120 | cmap_static:1, |
| 121 | unused:29; | 121 | acceleration_enabled:1, |
| 122 | unused:28; | ||
| 122 | 123 | ||
| 123 | /* The following should be defined in LCCR0 | 124 | /* The following should be defined in LCCR0 |
| 124 | * LCCR0_Act or LCCR0_Pas Active or Passive | 125 | * LCCR0_Act or LCCR0_Pas Active or Passive |
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h index ad23e74b762f..68464ce1c1ea 100644 --- a/arch/arm/mach-pxa/include/mach/regs-intc.h +++ b/arch/arm/mach-pxa/include/mach/regs-intc.h | |||
| @@ -13,6 +13,7 @@ | |||
| 13 | #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ | 13 | #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ |
| 14 | #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ | 14 | #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ |
| 15 | #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ | 15 | #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ |
| 16 | #define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ | ||
| 16 | 17 | ||
| 17 | #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ | 18 | #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ |
| 18 | #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ | 19 | #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ |
| @@ -20,4 +21,14 @@ | |||
| 20 | #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ | 21 | #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ |
| 21 | #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ | 22 | #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ |
| 22 | 23 | ||
| 24 | #define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */ | ||
| 25 | #define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */ | ||
| 26 | #define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */ | ||
| 27 | #define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */ | ||
| 28 | #define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */ | ||
| 29 | |||
| 30 | #define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \ | ||
| 31 | : (x < 64 ? (0x94 + ((x - 32) << 2)) \ | ||
| 32 | : (0x128 + ((x - 64) << 2))))) | ||
| 33 | |||
| 23 | #endif /* __ASM_MACH_REGS_INTC_H */ | 34 | #endif /* __ASM_MACH_REGS_INTC_H */ |
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index b54749413e96..237734b5b1be 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h | |||
| @@ -37,7 +37,7 @@ static inline void arch_decomp_setup(void) | |||
| 37 | { | 37 | { |
| 38 | if (machine_is_littleton() || machine_is_intelmote2() | 38 | if (machine_is_littleton() || machine_is_intelmote2() |
| 39 | || machine_is_csb726() || machine_is_stargate2() | 39 | || machine_is_csb726() || machine_is_stargate2() |
| 40 | || machine_is_cm_x300()) | 40 | || machine_is_cm_x300() || machine_is_balloon3()) |
| 41 | UART = STUART; | 41 | UART = STUART; |
| 42 | } | 42 | } |
| 43 | 43 | ||
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index f6e0300e4f64..d694ce289668 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c | |||
| @@ -120,7 +120,7 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn) | |||
| 120 | 120 | ||
| 121 | void __init pxa_init_irq(int irq_nr, set_wake_t fn) | 121 | void __init pxa_init_irq(int irq_nr, set_wake_t fn) |
| 122 | { | 122 | { |
| 123 | int irq; | 123 | int irq, i; |
| 124 | 124 | ||
| 125 | pxa_internal_irq_nr = irq_nr; | 125 | pxa_internal_irq_nr = irq_nr; |
| 126 | 126 | ||
| @@ -129,6 +129,12 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) | |||
| 129 | _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ | 129 | _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ |
| 130 | } | 130 | } |
| 131 | 131 | ||
| 132 | /* initialize interrupt priority */ | ||
| 133 | if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { | ||
| 134 | for (i = 0; i < irq_nr; i++) | ||
| 135 | IPR(i) = i | (1 << 31); | ||
| 136 | } | ||
| 137 | |||
| 132 | /* only unmasked interrupts kick us out of idle */ | 138 | /* only unmasked interrupts kick us out of idle */ |
| 133 | ICCR = 1; | 139 | ICCR = 1; |
| 134 | 140 | ||
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 55b3788fd1ae..13848955d133 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c | |||
| @@ -265,45 +265,12 @@ static inline void littleton_init_keypad(void) {} | |||
| 265 | #endif | 265 | #endif |
| 266 | 266 | ||
| 267 | #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) | 267 | #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| 268 | static int littleton_mci_init(struct device *dev, | ||
| 269 | irq_handler_t littleton_detect_int, void *data) | ||
| 270 | { | ||
| 271 | int err, gpio_cd = GPIO_MMC1_CARD_DETECT; | ||
| 272 | |||
| 273 | err = gpio_request(gpio_cd, "mmc card detect"); | ||
| 274 | if (err) | ||
| 275 | goto err_request_cd; | ||
| 276 | |||
| 277 | gpio_direction_input(gpio_cd); | ||
| 278 | |||
| 279 | err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int, | ||
| 280 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | ||
| 281 | "mmc card detect", data); | ||
| 282 | if (err) { | ||
| 283 | dev_err(dev, "failed to request card detect IRQ\n"); | ||
| 284 | goto err_request_irq; | ||
| 285 | } | ||
| 286 | return 0; | ||
| 287 | |||
| 288 | err_request_irq: | ||
| 289 | gpio_free(gpio_cd); | ||
| 290 | err_request_cd: | ||
| 291 | return err; | ||
| 292 | } | ||
| 293 | |||
| 294 | static void littleton_mci_exit(struct device *dev, void *data) | ||
| 295 | { | ||
| 296 | int gpio_cd = GPIO_MMC1_CARD_DETECT; | ||
| 297 | |||
| 298 | free_irq(gpio_to_irq(gpio_cd), data); | ||
| 299 | gpio_free(gpio_cd); | ||
| 300 | } | ||
| 301 | |||
| 302 | static struct pxamci_platform_data littleton_mci_platform_data = { | 268 | static struct pxamci_platform_data littleton_mci_platform_data = { |
| 303 | .detect_delay = 20, | 269 | .detect_delay = 20, |
| 304 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 270 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 305 | .init = littleton_mci_init, | 271 | .gpio_card_detect = GPIO_MMC1_CARD_DETECT, |
| 306 | .exit = littleton_mci_exit, | 272 | .gpio_card_ro = -1, |
| 273 | .gpio_power = -1, | ||
| 307 | }; | 274 | }; |
| 308 | 275 | ||
| 309 | static void __init littleton_init_mmc(void) | 276 | static void __init littleton_init_mmc(void) |
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index f04c8333dff7..c6a94d3fdd61 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c | |||
| @@ -482,11 +482,14 @@ static void lubbock_mci_exit(struct device *dev, void *data) | |||
| 482 | } | 482 | } |
| 483 | 483 | ||
| 484 | static struct pxamci_platform_data lubbock_mci_platform_data = { | 484 | static struct pxamci_platform_data lubbock_mci_platform_data = { |
| 485 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 485 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 486 | .detect_delay = 1, | 486 | .detect_delay = 1, |
| 487 | .init = lubbock_mci_init, | 487 | .init = lubbock_mci_init, |
| 488 | .get_ro = lubbock_mci_get_ro, | 488 | .get_ro = lubbock_mci_get_ro, |
| 489 | .exit = lubbock_mci_exit, | 489 | .exit = lubbock_mci_exit, |
| 490 | .gpio_card_detect = -1, | ||
| 491 | .gpio_card_ro = -1, | ||
| 492 | .gpio_power = -1, | ||
| 490 | }; | 493 | }; |
| 491 | 494 | ||
| 492 | static void lubbock_irda_transceiver_mode(struct device *dev, int mode) | 495 | static void lubbock_irda_transceiver_mode(struct device *dev, int mode) |
| @@ -504,8 +507,9 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode) | |||
| 504 | } | 507 | } |
| 505 | 508 | ||
| 506 | static struct pxaficp_platform_data lubbock_ficp_platform_data = { | 509 | static struct pxaficp_platform_data lubbock_ficp_platform_data = { |
| 507 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE, | 510 | .gpio_pwdown = -1, |
| 508 | .transceiver_mode = lubbock_irda_transceiver_mode, | 511 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE, |
| 512 | .transceiver_mode = lubbock_irda_transceiver_mode, | ||
| 509 | }; | 513 | }; |
| 510 | 514 | ||
| 511 | static void __init lubbock_init(void) | 515 | static void __init lubbock_init(void) |
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index ca39669cffc5..5360c07f5138 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c | |||
| @@ -140,15 +140,9 @@ static unsigned long magician_pin_config[] __initdata = { | |||
| 140 | * IRDA | 140 | * IRDA |
| 141 | */ | 141 | */ |
| 142 | 142 | ||
| 143 | static void magician_irda_transceiver_mode(struct device *dev, int mode) | ||
| 144 | { | ||
| 145 | gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF); | ||
| 146 | pxa2xx_transceiver_mode(dev, mode); | ||
| 147 | } | ||
| 148 | |||
| 149 | static struct pxaficp_platform_data magician_ficp_info = { | 143 | static struct pxaficp_platform_data magician_ficp_info = { |
| 150 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 144 | .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN, |
| 151 | .transceiver_mode = magician_irda_transceiver_mode, | 145 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 152 | }; | 146 | }; |
| 153 | 147 | ||
| 154 | /* | 148 | /* |
| @@ -651,55 +645,24 @@ static struct platform_device bq24022 = { | |||
| 651 | static int magician_mci_init(struct device *dev, | 645 | static int magician_mci_init(struct device *dev, |
| 652 | irq_handler_t detect_irq, void *data) | 646 | irq_handler_t detect_irq, void *data) |
| 653 | { | 647 | { |
| 654 | int err; | 648 | return request_irq(IRQ_MAGICIAN_SD, detect_irq, |
| 655 | |||
| 656 | err = request_irq(IRQ_MAGICIAN_SD, detect_irq, | ||
| 657 | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, | 649 | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, |
| 658 | "MMC card detect", data); | 650 | "mmc card detect", data); |
| 659 | if (err) | ||
| 660 | goto err_request_irq; | ||
| 661 | err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER"); | ||
| 662 | if (err) | ||
| 663 | goto err_request_power; | ||
| 664 | err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY"); | ||
| 665 | if (err) | ||
| 666 | goto err_request_readonly; | ||
| 667 | |||
| 668 | return 0; | ||
| 669 | |||
| 670 | err_request_readonly: | ||
| 671 | gpio_free(EGPIO_MAGICIAN_SD_POWER); | ||
| 672 | err_request_power: | ||
| 673 | free_irq(IRQ_MAGICIAN_SD, data); | ||
| 674 | err_request_irq: | ||
| 675 | return err; | ||
| 676 | } | ||
| 677 | |||
| 678 | static void magician_mci_setpower(struct device *dev, unsigned int vdd) | ||
| 679 | { | ||
| 680 | struct pxamci_platform_data *pdata = dev->platform_data; | ||
| 681 | |||
| 682 | gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask); | ||
| 683 | } | ||
| 684 | |||
| 685 | static int magician_mci_get_ro(struct device *dev) | ||
| 686 | { | ||
| 687 | return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY)); | ||
| 688 | } | 651 | } |
| 689 | 652 | ||
| 690 | static void magician_mci_exit(struct device *dev, void *data) | 653 | static void magician_mci_exit(struct device *dev, void *data) |
| 691 | { | 654 | { |
| 692 | gpio_free(EGPIO_MAGICIAN_nSD_READONLY); | ||
| 693 | gpio_free(EGPIO_MAGICIAN_SD_POWER); | ||
| 694 | free_irq(IRQ_MAGICIAN_SD, data); | 655 | free_irq(IRQ_MAGICIAN_SD, data); |
| 695 | } | 656 | } |
| 696 | 657 | ||
| 697 | static struct pxamci_platform_data magician_mci_info = { | 658 | static struct pxamci_platform_data magician_mci_info = { |
| 698 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 659 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 699 | .init = magician_mci_init, | 660 | .init = magician_mci_init, |
| 700 | .get_ro = magician_mci_get_ro, | 661 | .exit = magician_mci_exit, |
| 701 | .setpower = magician_mci_setpower, | 662 | .gpio_card_detect = -1, |
| 702 | .exit = magician_mci_exit, | 663 | .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY, |
| 664 | .gpio_card_ro_invert = 1, | ||
| 665 | .gpio_power = EGPIO_MAGICIAN_SD_POWER, | ||
| 703 | }; | 666 | }; |
| 704 | 667 | ||
| 705 | 668 | ||
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index f4dabf0273ca..a4eeae345e64 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c | |||
| @@ -450,10 +450,13 @@ static void mainstone_mci_exit(struct device *dev, void *data) | |||
| 450 | } | 450 | } |
| 451 | 451 | ||
| 452 | static struct pxamci_platform_data mainstone_mci_platform_data = { | 452 | static struct pxamci_platform_data mainstone_mci_platform_data = { |
| 453 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 453 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 454 | .init = mainstone_mci_init, | 454 | .init = mainstone_mci_init, |
| 455 | .setpower = mainstone_mci_setpower, | 455 | .setpower = mainstone_mci_setpower, |
| 456 | .exit = mainstone_mci_exit, | 456 | .exit = mainstone_mci_exit, |
| 457 | .gpio_card_detect = -1, | ||
| 458 | .gpio_card_ro = -1, | ||
| 459 | .gpio_power = -1, | ||
| 457 | }; | 460 | }; |
| 458 | 461 | ||
| 459 | static void mainstone_irda_transceiver_mode(struct device *dev, int mode) | 462 | static void mainstone_irda_transceiver_mode(struct device *dev, int mode) |
| @@ -476,8 +479,9 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode) | |||
| 476 | } | 479 | } |
| 477 | 480 | ||
| 478 | static struct pxaficp_platform_data mainstone_ficp_platform_data = { | 481 | static struct pxaficp_platform_data mainstone_ficp_platform_data = { |
| 479 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | 482 | .gpio_pwdown = -1, |
| 480 | .transceiver_mode = mainstone_irda_transceiver_mode, | 483 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, |
| 484 | .transceiver_mode = mainstone_irda_transceiver_mode, | ||
| 481 | }; | 485 | }; |
| 482 | 486 | ||
| 483 | static struct gpio_keys_button gpio_keys_button[] = { | 487 | static struct gpio_keys_button gpio_keys_button[] = { |
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 2d28132c725b..3cab452e5567 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c | |||
| @@ -434,72 +434,15 @@ struct gpio_vbus_mach_info gpio_vbus_data = { | |||
| 434 | /* | 434 | /* |
| 435 | * SDIO/MMC Card controller | 435 | * SDIO/MMC Card controller |
| 436 | */ | 436 | */ |
| 437 | static void mci_setpower(struct device *dev, unsigned int vdd) | ||
| 438 | { | ||
| 439 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
| 440 | |||
| 441 | if ((1 << vdd) & p_d->ocr_mask) | ||
| 442 | gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */ | ||
| 443 | else | ||
| 444 | gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */ | ||
| 445 | } | ||
| 446 | |||
| 447 | static int mci_get_ro(struct device *dev) | ||
| 448 | { | ||
| 449 | return gpio_get_value(GPIO78_SDIO_RO); | ||
| 450 | } | ||
| 451 | |||
| 452 | struct gpio_ress mci_gpios[] = { | ||
| 453 | MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"), | ||
| 454 | MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"), | ||
| 455 | MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable") | ||
| 456 | }; | ||
| 457 | |||
| 458 | static void mci_exit(struct device *dev, void *data) | ||
| 459 | { | ||
| 460 | mio_gpio_free(ARRAY_AND_SIZE(mci_gpios)); | ||
| 461 | free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data); | ||
| 462 | } | ||
| 463 | |||
| 464 | static struct pxamci_platform_data mioa701_mci_info; | ||
| 465 | |||
| 466 | /** | 437 | /** |
| 467 | * The card detect interrupt isn't debounced so we delay it by 250ms | 438 | * The card detect interrupt isn't debounced so we delay it by 250ms |
| 468 | * to give the card a chance to fully insert/eject. | 439 | * to give the card a chance to fully insert/eject. |
| 469 | */ | 440 | */ |
| 470 | static int mci_init(struct device *dev, irq_handler_t detect_int, void *data) | ||
| 471 | { | ||
| 472 | int rc; | ||
| 473 | int irq = gpio_to_irq(GPIO15_SDIO_INSERT); | ||
| 474 | |||
| 475 | rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios)); | ||
| 476 | if (rc) | ||
| 477 | goto err_gpio; | ||
| 478 | /* enable RE/FE interrupt on card insertion and removal */ | ||
| 479 | rc = request_irq(irq, detect_int, | ||
| 480 | IRQF_DISABLED | IRQF_TRIGGER_RISING | | ||
| 481 | IRQF_TRIGGER_FALLING, | ||
| 482 | "MMC card detect", data); | ||
| 483 | if (rc) | ||
| 484 | goto err_irq; | ||
| 485 | |||
| 486 | mioa701_mci_info.detect_delay = msecs_to_jiffies(250); | ||
| 487 | return 0; | ||
| 488 | |||
| 489 | err_irq: | ||
| 490 | dev_err(dev, "mioa701_mci_init: MMC/SD:" | ||
| 491 | " can't request MMC card detect IRQ\n"); | ||
| 492 | mio_gpio_free(ARRAY_AND_SIZE(mci_gpios)); | ||
| 493 | err_gpio: | ||
| 494 | return rc; | ||
| 495 | } | ||
| 496 | |||
| 497 | static struct pxamci_platform_data mioa701_mci_info = { | 441 | static struct pxamci_platform_data mioa701_mci_info = { |
| 498 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 442 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 499 | .init = mci_init, | 443 | .gpio_card_detect = GPIO15_SDIO_INSERT, |
| 500 | .get_ro = mci_get_ro, | 444 | .gpio_card_ro = GPIO78_SDIO_RO, |
| 501 | .setpower = mci_setpower, | 445 | .gpio_power = GPIO91_SDIO_EN, |
| 502 | .exit = mci_exit, | ||
| 503 | }; | 446 | }; |
| 504 | 447 | ||
| 505 | /* FlashRAM */ | 448 | /* FlashRAM */ |
| @@ -765,19 +708,20 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { | |||
| 765 | }, | 708 | }, |
| 766 | }; | 709 | }; |
| 767 | 710 | ||
| 768 | static struct soc_camera_link iclink = { | ||
| 769 | .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */ | ||
| 770 | }; | ||
| 771 | |||
| 772 | /* Board I2C devices. */ | 711 | /* Board I2C devices. */ |
| 773 | static struct i2c_board_info __initdata mioa701_i2c_devices[] = { | 712 | static struct i2c_board_info __initdata mioa701_i2c_devices[] = { |
| 774 | { | 713 | { |
| 775 | /* Must initialize before the camera(s) */ | ||
| 776 | I2C_BOARD_INFO("mt9m111", 0x5d), | 714 | I2C_BOARD_INFO("mt9m111", 0x5d), |
| 777 | .platform_data = &iclink, | ||
| 778 | }, | 715 | }, |
| 779 | }; | 716 | }; |
| 780 | 717 | ||
| 718 | static struct soc_camera_link iclink = { | ||
| 719 | .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ | ||
| 720 | .board_info = &mioa701_i2c_devices[0], | ||
| 721 | .i2c_adapter_id = 0, | ||
| 722 | .module_name = "mt9m111", | ||
| 723 | }; | ||
| 724 | |||
| 781 | struct i2c_pxa_platform_data i2c_pdata = { | 725 | struct i2c_pxa_platform_data i2c_pdata = { |
| 782 | .fast_mode = 1, | 726 | .fast_mode = 1, |
| 783 | }; | 727 | }; |
| @@ -811,6 +755,7 @@ MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) | |||
| 811 | MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) | 755 | MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) |
| 812 | MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) | 756 | MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) |
| 813 | MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); | 757 | MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); |
| 758 | MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink); | ||
| 814 | 759 | ||
| 815 | static struct platform_device *devices[] __initdata = { | 760 | static struct platform_device *devices[] __initdata = { |
| 816 | &mioa701_gpio_keys, | 761 | &mioa701_gpio_keys, |
| @@ -821,6 +766,7 @@ static struct platform_device *devices[] __initdata = { | |||
| 821 | &power_dev, | 766 | &power_dev, |
| 822 | &strataflash, | 767 | &strataflash, |
| 823 | &gpio_vbus, | 768 | &gpio_vbus, |
| 769 | &mioa701_camera, | ||
| 824 | &mioa701_board, | 770 | &mioa701_board, |
| 825 | }; | 771 | }; |
| 826 | 772 | ||
| @@ -841,7 +787,7 @@ static void mioa701_restart(char c, const char *cmd) | |||
| 841 | static struct gpio_ress global_gpios[] = { | 787 | static struct gpio_ress global_gpios[] = { |
| 842 | MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"), | 788 | MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"), |
| 843 | MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), | 789 | MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), |
| 844 | MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power") | 790 | MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"), |
| 845 | }; | 791 | }; |
| 846 | 792 | ||
| 847 | static void __init mioa701_machine_init(void) | 793 | static void __init mioa701_machine_init(void) |
| @@ -855,6 +801,7 @@ static void __init mioa701_machine_init(void) | |||
| 855 | mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); | 801 | mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); |
| 856 | bootstrap_init(); | 802 | bootstrap_init(); |
| 857 | set_pxa_fb_info(&mioa701_pxafb_info); | 803 | set_pxa_fb_info(&mioa701_pxafb_info); |
| 804 | mioa701_mci_info.detect_delay = msecs_to_jiffies(250); | ||
| 858 | pxa_set_mci_info(&mioa701_mci_info); | 805 | pxa_set_mci_info(&mioa701_mci_info); |
| 859 | pxa_set_keypad_info(&mioa701_keypad_info); | 806 | pxa_set_keypad_info(&mioa701_keypad_info); |
| 860 | wm97xx_bat_set_pdata(&mioa701_battery_data); | 807 | wm97xx_bat_set_pdata(&mioa701_battery_data); |
| @@ -869,7 +816,6 @@ static void __init mioa701_machine_init(void) | |||
| 869 | pxa_set_i2c_info(&i2c_pdata); | 816 | pxa_set_i2c_info(&i2c_pdata); |
| 870 | pxa27x_set_i2c_power_info(NULL); | 817 | pxa27x_set_i2c_power_info(NULL); |
| 871 | pxa_set_camera_info(&mioa701_pxacamera_platform_data); | 818 | pxa_set_camera_info(&mioa701_pxacamera_platform_data); |
| 872 | i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices)); | ||
| 873 | } | 819 | } |
| 874 | 820 | ||
| 875 | static void mioa701_machine_exit(void) | 821 | static void mioa701_machine_exit(void) |
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 169fcc18154e..1ad029dd4438 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c | |||
| @@ -25,6 +25,9 @@ | |||
| 25 | #include <linux/wm97xx_batt.h> | 25 | #include <linux/wm97xx_batt.h> |
| 26 | #include <linux/power_supply.h> | 26 | #include <linux/power_supply.h> |
| 27 | #include <linux/sysdev.h> | 27 | #include <linux/sysdev.h> |
| 28 | #include <linux/mtd/mtd.h> | ||
| 29 | #include <linux/mtd/partitions.h> | ||
| 30 | #include <linux/mtd/physmap.h> | ||
| 28 | 31 | ||
| 29 | #include <asm/mach-types.h> | 32 | #include <asm/mach-types.h> |
| 30 | #include <asm/mach/arch.h> | 33 | #include <asm/mach/arch.h> |
| @@ -141,85 +144,50 @@ static unsigned long palmld_pin_config[] __initdata = { | |||
| 141 | }; | 144 | }; |
| 142 | 145 | ||
| 143 | /****************************************************************************** | 146 | /****************************************************************************** |
| 144 | * SD/MMC card controller | 147 | * NOR Flash |
| 145 | ******************************************************************************/ | 148 | ******************************************************************************/ |
| 146 | static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int, | 149 | static struct mtd_partition palmld_partitions[] = { |
| 147 | void *data) | 150 | { |
| 148 | { | 151 | .name = "Flash", |
| 149 | int err = 0; | 152 | .offset = 0x00000000, |
| 150 | 153 | .size = MTDPART_SIZ_FULL, | |
| 151 | /* Setup an interrupt for detecting card insert/remove events */ | 154 | .mask_flags = 0 |
| 152 | err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ"); | ||
| 153 | if (err) | ||
| 154 | goto err; | ||
| 155 | err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N); | ||
| 156 | if (err) | ||
| 157 | goto err2; | ||
| 158 | err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), | ||
| 159 | palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | | ||
| 160 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
| 161 | "SD/MMC card detect", data); | ||
| 162 | if (err) { | ||
| 163 | printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", | ||
| 164 | __func__); | ||
| 165 | goto err2; | ||
| 166 | } | 155 | } |
| 156 | }; | ||
| 167 | 157 | ||
| 168 | err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER"); | 158 | static struct physmap_flash_data palmld_flash_data[] = { |
| 169 | if (err) | 159 | { |
| 170 | goto err3; | 160 | .width = 2, /* bankwidth in bytes */ |
| 171 | err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0); | 161 | .parts = palmld_partitions, |
| 172 | if (err) | 162 | .nr_parts = ARRAY_SIZE(palmld_partitions) |
| 173 | goto err4; | 163 | } |
| 174 | 164 | }; | |
| 175 | err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY"); | ||
| 176 | if (err) | ||
| 177 | goto err4; | ||
| 178 | err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY); | ||
| 179 | if (err) | ||
| 180 | goto err5; | ||
| 181 | |||
| 182 | printk(KERN_DEBUG "%s: irq registered\n", __func__); | ||
| 183 | |||
| 184 | return 0; | ||
| 185 | |||
| 186 | err5: | ||
| 187 | gpio_free(GPIO_NR_PALMLD_SD_READONLY); | ||
| 188 | err4: | ||
| 189 | gpio_free(GPIO_NR_PALMLD_SD_POWER); | ||
| 190 | err3: | ||
| 191 | free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); | ||
| 192 | err2: | ||
| 193 | gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); | ||
| 194 | err: | ||
| 195 | return err; | ||
| 196 | } | ||
| 197 | |||
| 198 | static void palmld_mci_exit(struct device *dev, void *data) | ||
| 199 | { | ||
| 200 | gpio_free(GPIO_NR_PALMLD_SD_READONLY); | ||
| 201 | gpio_free(GPIO_NR_PALMLD_SD_POWER); | ||
| 202 | free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); | ||
| 203 | gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); | ||
| 204 | } | ||
| 205 | 165 | ||
| 206 | static void palmld_mci_power(struct device *dev, unsigned int vdd) | 166 | static struct resource palmld_flash_resource = { |
| 207 | { | 167 | .start = PXA_CS0_PHYS, |
| 208 | struct pxamci_platform_data *p_d = dev->platform_data; | 168 | .end = PXA_CS0_PHYS + SZ_4M - 1, |
| 209 | gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd)); | 169 | .flags = IORESOURCE_MEM, |
| 210 | } | 170 | }; |
| 211 | 171 | ||
| 212 | static int palmld_mci_get_ro(struct device *dev) | 172 | static struct platform_device palmld_flash = { |
| 213 | { | 173 | .name = "physmap-flash", |
| 214 | return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY); | 174 | .id = 0, |
| 215 | } | 175 | .resource = &palmld_flash_resource, |
| 176 | .num_resources = 1, | ||
| 177 | .dev = { | ||
| 178 | .platform_data = palmld_flash_data, | ||
| 179 | }, | ||
| 180 | }; | ||
| 216 | 181 | ||
| 182 | /****************************************************************************** | ||
| 183 | * SD/MMC card controller | ||
| 184 | ******************************************************************************/ | ||
| 217 | static struct pxamci_platform_data palmld_mci_platform_data = { | 185 | static struct pxamci_platform_data palmld_mci_platform_data = { |
| 218 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 186 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 219 | .setpower = palmld_mci_power, | 187 | .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N, |
| 220 | .get_ro = palmld_mci_get_ro, | 188 | .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY, |
| 221 | .init = palmld_mci_init, | 189 | .gpio_power = GPIO_NR_PALMLD_SD_POWER, |
| 222 | .exit = palmld_mci_exit, | 190 | .detect_delay = 20, |
| 223 | }; | 191 | }; |
| 224 | 192 | ||
| 225 | /****************************************************************************** | 193 | /****************************************************************************** |
| @@ -336,35 +304,9 @@ static struct platform_device palmld_backlight = { | |||
| 336 | /****************************************************************************** | 304 | /****************************************************************************** |
| 337 | * IrDA | 305 | * IrDA |
| 338 | ******************************************************************************/ | 306 | ******************************************************************************/ |
| 339 | static int palmld_irda_startup(struct device *dev) | ||
| 340 | { | ||
| 341 | int err; | ||
| 342 | err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE"); | ||
| 343 | if (err) | ||
| 344 | goto err; | ||
| 345 | err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1); | ||
| 346 | if (err) | ||
| 347 | gpio_free(GPIO_NR_PALMLD_IR_DISABLE); | ||
| 348 | err: | ||
| 349 | return err; | ||
| 350 | } | ||
| 351 | |||
| 352 | static void palmld_irda_shutdown(struct device *dev) | ||
| 353 | { | ||
| 354 | gpio_free(GPIO_NR_PALMLD_IR_DISABLE); | ||
| 355 | } | ||
| 356 | |||
| 357 | static void palmld_irda_transceiver_mode(struct device *dev, int mode) | ||
| 358 | { | ||
| 359 | gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF); | ||
| 360 | pxa2xx_transceiver_mode(dev, mode); | ||
| 361 | } | ||
| 362 | |||
| 363 | static struct pxaficp_platform_data palmld_ficp_platform_data = { | 307 | static struct pxaficp_platform_data palmld_ficp_platform_data = { |
| 364 | .startup = palmld_irda_startup, | 308 | .gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE, |
| 365 | .shutdown = palmld_irda_shutdown, | 309 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 366 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | ||
| 367 | .transceiver_mode = palmld_irda_transceiver_mode, | ||
| 368 | }; | 310 | }; |
| 369 | 311 | ||
| 370 | /****************************************************************************** | 312 | /****************************************************************************** |
| @@ -560,6 +502,7 @@ static struct platform_device *devices[] __initdata = { | |||
| 560 | &power_supply, | 502 | &power_supply, |
| 561 | &palmld_asoc, | 503 | &palmld_asoc, |
| 562 | &palmld_hdd, | 504 | &palmld_hdd, |
| 505 | &palmld_flash, | ||
| 563 | }; | 506 | }; |
| 564 | 507 | ||
| 565 | static struct map_desc palmld_io_desc[] __initdata = { | 508 | static struct map_desc palmld_io_desc[] __initdata = { |
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 33f726ff55e5..2dd7ce28556b 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c | |||
| @@ -124,83 +124,12 @@ static unsigned long palmt5_pin_config[] __initdata = { | |||
| 124 | /****************************************************************************** | 124 | /****************************************************************************** |
| 125 | * SD/MMC card controller | 125 | * SD/MMC card controller |
| 126 | ******************************************************************************/ | 126 | ******************************************************************************/ |
| 127 | static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int, | ||
| 128 | void *data) | ||
| 129 | { | ||
| 130 | int err = 0; | ||
| 131 | |||
| 132 | /* Setup an interrupt for detecting card insert/remove events */ | ||
| 133 | err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ"); | ||
| 134 | if (err) | ||
| 135 | goto err; | ||
| 136 | err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N); | ||
| 137 | if (err) | ||
| 138 | goto err2; | ||
| 139 | err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), | ||
| 140 | palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | | ||
| 141 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
| 142 | "SD/MMC card detect", data); | ||
| 143 | if (err) { | ||
| 144 | printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", | ||
| 145 | __func__); | ||
| 146 | goto err2; | ||
| 147 | } | ||
| 148 | |||
| 149 | err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER"); | ||
| 150 | if (err) | ||
| 151 | goto err3; | ||
| 152 | err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0); | ||
| 153 | if (err) | ||
| 154 | goto err4; | ||
| 155 | |||
| 156 | err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY"); | ||
| 157 | if (err) | ||
| 158 | goto err4; | ||
| 159 | err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY); | ||
| 160 | if (err) | ||
| 161 | goto err5; | ||
| 162 | |||
| 163 | printk(KERN_DEBUG "%s: irq registered\n", __func__); | ||
| 164 | |||
| 165 | return 0; | ||
| 166 | |||
| 167 | err5: | ||
| 168 | gpio_free(GPIO_NR_PALMT5_SD_READONLY); | ||
| 169 | err4: | ||
| 170 | gpio_free(GPIO_NR_PALMT5_SD_POWER); | ||
| 171 | err3: | ||
| 172 | free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data); | ||
| 173 | err2: | ||
| 174 | gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); | ||
| 175 | err: | ||
| 176 | return err; | ||
| 177 | } | ||
| 178 | |||
| 179 | static void palmt5_mci_exit(struct device *dev, void *data) | ||
| 180 | { | ||
| 181 | gpio_free(GPIO_NR_PALMT5_SD_READONLY); | ||
| 182 | gpio_free(GPIO_NR_PALMT5_SD_POWER); | ||
| 183 | free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data); | ||
| 184 | gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); | ||
| 185 | } | ||
| 186 | |||
| 187 | static void palmt5_mci_power(struct device *dev, unsigned int vdd) | ||
| 188 | { | ||
| 189 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
| 190 | gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd)); | ||
| 191 | } | ||
| 192 | |||
| 193 | static int palmt5_mci_get_ro(struct device *dev) | ||
| 194 | { | ||
| 195 | return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY); | ||
| 196 | } | ||
| 197 | |||
| 198 | static struct pxamci_platform_data palmt5_mci_platform_data = { | 127 | static struct pxamci_platform_data palmt5_mci_platform_data = { |
| 199 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 128 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 200 | .setpower = palmt5_mci_power, | 129 | .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N, |
| 201 | .get_ro = palmt5_mci_get_ro, | 130 | .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY, |
| 202 | .init = palmt5_mci_init, | 131 | .gpio_power = GPIO_NR_PALMT5_SD_POWER, |
| 203 | .exit = palmt5_mci_exit, | 132 | .detect_delay = 20, |
| 204 | }; | 133 | }; |
| 205 | 134 | ||
| 206 | /****************************************************************************** | 135 | /****************************************************************************** |
| @@ -314,35 +243,9 @@ static struct platform_device palmt5_backlight = { | |||
| 314 | /****************************************************************************** | 243 | /****************************************************************************** |
| 315 | * IrDA | 244 | * IrDA |
| 316 | ******************************************************************************/ | 245 | ******************************************************************************/ |
| 317 | static int palmt5_irda_startup(struct device *dev) | ||
| 318 | { | ||
| 319 | int err; | ||
| 320 | err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE"); | ||
| 321 | if (err) | ||
| 322 | goto err; | ||
| 323 | err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1); | ||
| 324 | if (err) | ||
| 325 | gpio_free(GPIO_NR_PALMT5_IR_DISABLE); | ||
| 326 | err: | ||
| 327 | return err; | ||
| 328 | } | ||
| 329 | |||
| 330 | static void palmt5_irda_shutdown(struct device *dev) | ||
| 331 | { | ||
| 332 | gpio_free(GPIO_NR_PALMT5_IR_DISABLE); | ||
| 333 | } | ||
| 334 | |||
| 335 | static void palmt5_irda_transceiver_mode(struct device *dev, int mode) | ||
| 336 | { | ||
| 337 | gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF); | ||
| 338 | pxa2xx_transceiver_mode(dev, mode); | ||
| 339 | } | ||
| 340 | |||
| 341 | static struct pxaficp_platform_data palmt5_ficp_platform_data = { | 246 | static struct pxaficp_platform_data palmt5_ficp_platform_data = { |
| 342 | .startup = palmt5_irda_startup, | 247 | .gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE, |
| 343 | .shutdown = palmt5_irda_shutdown, | 248 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 344 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | ||
| 345 | .transceiver_mode = palmt5_irda_transceiver_mode, | ||
| 346 | }; | 249 | }; |
| 347 | 250 | ||
| 348 | /****************************************************************************** | 251 | /****************************************************************************** |
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c new file mode 100644 index 000000000000..bb2cc0dd44ec --- /dev/null +++ b/arch/arm/mach-pxa/palmtc.c | |||
| @@ -0,0 +1,436 @@ | |||
| 1 | /* | ||
| 2 | * linux/arch/arm/mach-pxa/palmtc.c | ||
| 3 | * | ||
| 4 | * Support for the Palm Tungsten|C | ||
| 5 | * | ||
| 6 | * Author: Marek Vasut <marek.vasut@gmail.com> | ||
| 7 | * | ||
| 8 | * Based on work of: | ||
| 9 | * Petr Blaha <p3t3@centrum.cz> | ||
| 10 | * Chetan S. Kumar <shivakumar.chetan@gmail.com> | ||
| 11 | * | ||
| 12 | * This program is free software; you can redistribute it and/or modify | ||
| 13 | * it under the terms of the GNU General Public License version 2 as | ||
| 14 | * published by the Free Software Foundation. | ||
| 15 | */ | ||
| 16 | |||
| 17 | #include <linux/platform_device.h> | ||
| 18 | #include <linux/delay.h> | ||
| 19 | #include <linux/irq.h> | ||
| 20 | #include <linux/input.h> | ||
| 21 | #include <linux/pwm_backlight.h> | ||
| 22 | #include <linux/gpio.h> | ||
| 23 | #include <linux/input/matrix_keypad.h> | ||
| 24 | #include <linux/ucb1400.h> | ||
| 25 | #include <linux/power_supply.h> | ||
| 26 | #include <linux/gpio_keys.h> | ||
| 27 | #include <linux/mtd/physmap.h> | ||
| 28 | |||
| 29 | #include <asm/mach-types.h> | ||
| 30 | #include <asm/mach/arch.h> | ||
| 31 | #include <asm/mach/map.h> | ||
| 32 | |||
| 33 | #include <mach/audio.h> | ||
| 34 | #include <mach/palmtc.h> | ||
| 35 | #include <mach/mmc.h> | ||
| 36 | #include <mach/pxafb.h> | ||
| 37 | #include <mach/mfp-pxa25x.h> | ||
| 38 | #include <mach/irda.h> | ||
| 39 | #include <mach/udc.h> | ||
| 40 | #include <mach/pxa2xx-regs.h> | ||
| 41 | |||
| 42 | #include "generic.h" | ||
| 43 | #include "devices.h" | ||
| 44 | |||
| 45 | /****************************************************************************** | ||
| 46 | * Pin configuration | ||
| 47 | ******************************************************************************/ | ||
| 48 | static unsigned long palmtc_pin_config[] __initdata = { | ||
| 49 | /* MMC */ | ||
| 50 | GPIO6_MMC_CLK, | ||
| 51 | GPIO8_MMC_CS0, | ||
| 52 | GPIO12_GPIO, /* detect */ | ||
| 53 | GPIO32_GPIO, /* power */ | ||
| 54 | GPIO54_GPIO, /* r/o switch */ | ||
| 55 | |||
| 56 | /* PCMCIA */ | ||
| 57 | GPIO52_nPCE_1, | ||
| 58 | GPIO53_nPCE_2, | ||
| 59 | GPIO50_nPIOR, | ||
| 60 | GPIO51_nPIOW, | ||
| 61 | GPIO49_nPWE, | ||
| 62 | GPIO48_nPOE, | ||
| 63 | GPIO52_nPCE_1, | ||
| 64 | GPIO53_nPCE_2, | ||
| 65 | GPIO57_nIOIS16, | ||
| 66 | GPIO56_nPWAIT, | ||
| 67 | |||
| 68 | /* AC97 */ | ||
| 69 | GPIO28_AC97_BITCLK, | ||
| 70 | GPIO29_AC97_SDATA_IN_0, | ||
| 71 | GPIO30_AC97_SDATA_OUT, | ||
| 72 | GPIO31_AC97_SYNC, | ||
| 73 | |||
| 74 | /* IrDA */ | ||
| 75 | GPIO45_GPIO, /* ir disable */ | ||
| 76 | GPIO46_FICP_RXD, | ||
| 77 | GPIO47_FICP_TXD, | ||
| 78 | |||
| 79 | /* PWM */ | ||
| 80 | GPIO17_PWM1_OUT, | ||
| 81 | |||
| 82 | /* USB */ | ||
| 83 | GPIO4_GPIO, /* detect */ | ||
| 84 | GPIO36_GPIO, /* pullup */ | ||
| 85 | |||
| 86 | /* LCD */ | ||
| 87 | GPIO58_LCD_LDD_0, | ||
| 88 | GPIO59_LCD_LDD_1, | ||
| 89 | GPIO60_LCD_LDD_2, | ||
| 90 | GPIO61_LCD_LDD_3, | ||
| 91 | GPIO62_LCD_LDD_4, | ||
| 92 | GPIO63_LCD_LDD_5, | ||
| 93 | GPIO64_LCD_LDD_6, | ||
| 94 | GPIO65_LCD_LDD_7, | ||
| 95 | GPIO66_LCD_LDD_8, | ||
| 96 | GPIO67_LCD_LDD_9, | ||
| 97 | GPIO68_LCD_LDD_10, | ||
| 98 | GPIO69_LCD_LDD_11, | ||
| 99 | GPIO70_LCD_LDD_12, | ||
| 100 | GPIO71_LCD_LDD_13, | ||
| 101 | GPIO72_LCD_LDD_14, | ||
| 102 | GPIO73_LCD_LDD_15, | ||
| 103 | GPIO74_LCD_FCLK, | ||
| 104 | GPIO75_LCD_LCLK, | ||
| 105 | GPIO76_LCD_PCLK, | ||
| 106 | GPIO77_LCD_BIAS, | ||
| 107 | |||
| 108 | /* MATRIX KEYPAD */ | ||
| 109 | GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */ | ||
| 110 | GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 1 */ | ||
| 111 | GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 2 */ | ||
| 112 | GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 3 */ | ||
| 113 | GPIO18_GPIO | MFP_LPM_DRIVE_LOW, /* out 0 */ | ||
| 114 | GPIO19_GPIO | MFP_LPM_DRIVE_LOW, /* out 1 */ | ||
| 115 | GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* out 2 */ | ||
| 116 | GPIO21_GPIO | MFP_LPM_DRIVE_LOW, /* out 3 */ | ||
| 117 | GPIO22_GPIO | MFP_LPM_DRIVE_LOW, /* out 4 */ | ||
| 118 | GPIO23_GPIO | MFP_LPM_DRIVE_LOW, /* out 5 */ | ||
| 119 | GPIO24_GPIO | MFP_LPM_DRIVE_LOW, /* out 6 */ | ||
| 120 | GPIO25_GPIO | MFP_LPM_DRIVE_LOW, /* out 7 */ | ||
| 121 | GPIO26_GPIO | MFP_LPM_DRIVE_LOW, /* out 8 */ | ||
| 122 | GPIO27_GPIO | MFP_LPM_DRIVE_LOW, /* out 9 */ | ||
| 123 | GPIO79_GPIO | MFP_LPM_DRIVE_LOW, /* out 10 */ | ||
| 124 | GPIO80_GPIO | MFP_LPM_DRIVE_LOW, /* out 11 */ | ||
| 125 | |||
| 126 | /* PXA GPIO KEYS */ | ||
| 127 | GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH, /* hotsync button on cradle */ | ||
| 128 | |||
| 129 | /* MISC */ | ||
| 130 | GPIO1_RST, /* reset */ | ||
| 131 | GPIO2_GPIO, /* earphone detect */ | ||
| 132 | GPIO16_GPIO, /* backlight switch */ | ||
| 133 | }; | ||
| 134 | |||
| 135 | /****************************************************************************** | ||
| 136 | * SD/MMC card controller | ||
| 137 | ******************************************************************************/ | ||
| 138 | static struct pxamci_platform_data palmtc_mci_platform_data = { | ||
| 139 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | ||
| 140 | .gpio_power = GPIO_NR_PALMTC_SD_POWER, | ||
| 141 | .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY, | ||
| 142 | .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N, | ||
| 143 | .detect_delay = 20, | ||
| 144 | }; | ||
| 145 | |||
| 146 | /****************************************************************************** | ||
| 147 | * GPIO keys | ||
| 148 | ******************************************************************************/ | ||
| 149 | static struct gpio_keys_button palmtc_pxa_buttons[] = { | ||
| 150 | {KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1}, | ||
| 151 | }; | ||
| 152 | |||
| 153 | static struct gpio_keys_platform_data palmtc_pxa_keys_data = { | ||
| 154 | .buttons = palmtc_pxa_buttons, | ||
| 155 | .nbuttons = ARRAY_SIZE(palmtc_pxa_buttons), | ||
| 156 | }; | ||
| 157 | |||
| 158 | static struct platform_device palmtc_pxa_keys = { | ||
| 159 | .name = "gpio-keys", | ||
| 160 | .id = -1, | ||
| 161 | .dev = { | ||
| 162 | .platform_data = &palmtc_pxa_keys_data, | ||
| 163 | }, | ||
| 164 | }; | ||
| 165 | |||
| 166 | /****************************************************************************** | ||
| 167 | * Backlight | ||
| 168 | ******************************************************************************/ | ||
| 169 | static int palmtc_backlight_init(struct device *dev) | ||
| 170 | { | ||
| 171 | int ret; | ||
| 172 | |||
| 173 | ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER"); | ||
| 174 | if (ret) | ||
| 175 | goto err; | ||
| 176 | ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1); | ||
| 177 | if (ret) | ||
| 178 | goto err2; | ||
| 179 | |||
| 180 | return 0; | ||
| 181 | |||
| 182 | err2: | ||
| 183 | gpio_free(GPIO_NR_PALMTC_BL_POWER); | ||
| 184 | err: | ||
| 185 | return ret; | ||
| 186 | } | ||
| 187 | |||
| 188 | static int palmtc_backlight_notify(int brightness) | ||
| 189 | { | ||
| 190 | /* backlight is on when GPIO16 AF0 is high */ | ||
| 191 | gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness); | ||
| 192 | return brightness; | ||
| 193 | } | ||
| 194 | |||
| 195 | static void palmtc_backlight_exit(struct device *dev) | ||
| 196 | { | ||
| 197 | gpio_free(GPIO_NR_PALMTC_BL_POWER); | ||
| 198 | } | ||
| 199 | |||
| 200 | static struct platform_pwm_backlight_data palmtc_backlight_data = { | ||
| 201 | .pwm_id = 1, | ||
| 202 | .max_brightness = PALMTC_MAX_INTENSITY, | ||
| 203 | .dft_brightness = PALMTC_MAX_INTENSITY, | ||
| 204 | .pwm_period_ns = PALMTC_PERIOD_NS, | ||
| 205 | .init = palmtc_backlight_init, | ||
| 206 | .notify = palmtc_backlight_notify, | ||
| 207 | .exit = palmtc_backlight_exit, | ||
| 208 | }; | ||
| 209 | |||
| 210 | static struct platform_device palmtc_backlight = { | ||
| 211 | .name = "pwm-backlight", | ||
| 212 | .dev = { | ||
| 213 | .parent = &pxa25x_device_pwm1.dev, | ||
| 214 | .platform_data = &palmtc_backlight_data, | ||
| 215 | }, | ||
| 216 | }; | ||
| 217 | |||
| 218 | /****************************************************************************** | ||
| 219 | * IrDA | ||
| 220 | ******************************************************************************/ | ||
| 221 | static struct pxaficp_platform_data palmtc_ficp_platform_data = { | ||
| 222 | .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE, | ||
| 223 | .transceiver_cap = IR_SIRMODE | IR_OFF, | ||
| 224 | }; | ||
| 225 | |||
| 226 | /****************************************************************************** | ||
| 227 | * Keyboard | ||
| 228 | ******************************************************************************/ | ||
| 229 | static const uint32_t palmtc_matrix_keys[] = { | ||
| 230 | KEY(0, 0, KEY_F1), | ||
| 231 | KEY(0, 1, KEY_X), | ||
| 232 | KEY(0, 2, KEY_POWER), | ||
| 233 | KEY(0, 3, KEY_TAB), | ||
| 234 | KEY(0, 4, KEY_A), | ||
| 235 | KEY(0, 5, KEY_Q), | ||
| 236 | KEY(0, 6, KEY_LEFTSHIFT), | ||
| 237 | KEY(0, 7, KEY_Z), | ||
| 238 | KEY(0, 8, KEY_S), | ||
| 239 | KEY(0, 9, KEY_W), | ||
| 240 | KEY(0, 10, KEY_E), | ||
| 241 | KEY(0, 11, KEY_UP), | ||
| 242 | |||
| 243 | KEY(1, 0, KEY_F2), | ||
| 244 | KEY(1, 1, KEY_DOWN), | ||
| 245 | KEY(1, 3, KEY_D), | ||
| 246 | KEY(1, 4, KEY_C), | ||
| 247 | KEY(1, 5, KEY_F), | ||
| 248 | KEY(1, 6, KEY_R), | ||
| 249 | KEY(1, 7, KEY_SPACE), | ||
| 250 | KEY(1, 8, KEY_V), | ||
| 251 | KEY(1, 9, KEY_G), | ||
| 252 | KEY(1, 10, KEY_T), | ||
| 253 | KEY(1, 11, KEY_LEFT), | ||
| 254 | |||
| 255 | KEY(2, 0, KEY_F3), | ||
| 256 | KEY(2, 1, KEY_LEFTCTRL), | ||
| 257 | KEY(2, 3, KEY_H), | ||
| 258 | KEY(2, 4, KEY_Y), | ||
| 259 | KEY(2, 5, KEY_N), | ||
| 260 | KEY(2, 6, KEY_J), | ||
| 261 | KEY(2, 7, KEY_U), | ||
| 262 | KEY(2, 8, KEY_M), | ||
| 263 | KEY(2, 9, KEY_K), | ||
| 264 | KEY(2, 10, KEY_I), | ||
| 265 | KEY(2, 11, KEY_RIGHT), | ||
| 266 | |||
| 267 | KEY(3, 0, KEY_F4), | ||
| 268 | KEY(3, 1, KEY_ENTER), | ||
| 269 | KEY(3, 3, KEY_DOT), | ||
| 270 | KEY(3, 4, KEY_L), | ||
| 271 | KEY(3, 5, KEY_O), | ||
| 272 | KEY(3, 6, KEY_LEFTALT), | ||
| 273 | KEY(3, 7, KEY_ENTER), | ||
| 274 | KEY(3, 8, KEY_BACKSPACE), | ||
| 275 | KEY(3, 9, KEY_P), | ||
| 276 | KEY(3, 10, KEY_B), | ||
| 277 | KEY(3, 11, KEY_FN), | ||
| 278 | }; | ||
| 279 | |||
| 280 | const struct matrix_keymap_data palmtc_keymap_data = { | ||
| 281 | .keymap = palmtc_matrix_keys, | ||
| 282 | .keymap_size = ARRAY_SIZE(palmtc_matrix_keys), | ||
| 283 | }; | ||
| 284 | |||
| 285 | const static unsigned int palmtc_keypad_row_gpios[] = { | ||
| 286 | 0, 9, 10, 11 | ||
| 287 | }; | ||
| 288 | |||
| 289 | const static unsigned int palmtc_keypad_col_gpios[] = { | ||
| 290 | 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80 | ||
| 291 | }; | ||
| 292 | |||
| 293 | static struct matrix_keypad_platform_data palmtc_keypad_platform_data = { | ||
| 294 | .keymap_data = &palmtc_keymap_data, | ||
| 295 | .col_gpios = palmtc_keypad_row_gpios, | ||
| 296 | .num_col_gpios = 12, | ||
| 297 | .row_gpios = palmtc_keypad_col_gpios, | ||
| 298 | .num_row_gpios = 4, | ||
| 299 | .active_low = 1, | ||
| 300 | |||
| 301 | .debounce_ms = 20, | ||
| 302 | .col_scan_delay_us = 5, | ||
| 303 | }; | ||
| 304 | |||
| 305 | static struct platform_device palmtc_keyboard = { | ||
| 306 | .name = "matrix-keypad", | ||
| 307 | .id = -1, | ||
| 308 | .dev = { | ||
| 309 | .platform_data = &palmtc_keypad_platform_data, | ||
| 310 | }, | ||
| 311 | }; | ||
| 312 | |||
| 313 | /****************************************************************************** | ||
| 314 | * UDC | ||
| 315 | ******************************************************************************/ | ||
| 316 | static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = { | ||
| 317 | .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N, | ||
| 318 | .gpio_vbus_inverted = 1, | ||
| 319 | .gpio_pullup = GPIO_NR_PALMTC_USB_POWER, | ||
| 320 | }; | ||
| 321 | |||
| 322 | /****************************************************************************** | ||
| 323 | * Touchscreen / Battery / GPIO-extender | ||
| 324 | ******************************************************************************/ | ||
| 325 | static struct platform_device palmtc_ucb1400_core = { | ||
| 326 | .name = "ucb1400_core", | ||
| 327 | .id = -1, | ||
| 328 | }; | ||
| 329 | |||
| 330 | /****************************************************************************** | ||
| 331 | * NOR Flash | ||
| 332 | ******************************************************************************/ | ||
| 333 | static struct resource palmtc_flash_resource = { | ||
| 334 | .start = PXA_CS0_PHYS, | ||
| 335 | .end = PXA_CS0_PHYS + SZ_16M - 1, | ||
| 336 | .flags = IORESOURCE_MEM, | ||
| 337 | }; | ||
| 338 | |||
| 339 | static struct mtd_partition palmtc_flash_parts[] = { | ||
| 340 | { | ||
| 341 | .name = "U-Boot Bootloader", | ||
| 342 | .offset = 0x0, | ||
| 343 | .size = 0x40000, | ||
| 344 | }, | ||
| 345 | { | ||
| 346 | .name = "Linux Kernel", | ||
| 347 | .offset = 0x40000, | ||
| 348 | .size = 0x2c0000, | ||
| 349 | }, | ||
| 350 | { | ||
| 351 | .name = "Filesystem", | ||
| 352 | .offset = 0x300000, | ||
| 353 | .size = 0xcc0000, | ||
| 354 | }, | ||
| 355 | { | ||
| 356 | .name = "U-Boot Environment", | ||
| 357 | .offset = 0xfc0000, | ||
| 358 | .size = MTDPART_SIZ_FULL, | ||
| 359 | }, | ||
| 360 | }; | ||
| 361 | |||
| 362 | static struct physmap_flash_data palmtc_flash_data = { | ||
| 363 | .width = 4, | ||
| 364 | .parts = palmtc_flash_parts, | ||
| 365 | .nr_parts = ARRAY_SIZE(palmtc_flash_parts), | ||
| 366 | }; | ||
| 367 | |||
| 368 | static struct platform_device palmtc_flash = { | ||
| 369 | .name = "physmap-flash", | ||
| 370 | .id = -1, | ||
| 371 | .resource = &palmtc_flash_resource, | ||
| 372 | .num_resources = 1, | ||
| 373 | .dev = { | ||
| 374 | .platform_data = &palmtc_flash_data, | ||
| 375 | }, | ||
| 376 | }; | ||
| 377 | |||
| 378 | /****************************************************************************** | ||
| 379 | * Framebuffer | ||
| 380 | ******************************************************************************/ | ||
| 381 | static struct pxafb_mode_info palmtc_lcd_modes[] = { | ||
| 382 | { | ||
| 383 | .pixclock = 115384, | ||
| 384 | .xres = 320, | ||
| 385 | .yres = 320, | ||
| 386 | .bpp = 16, | ||
| 387 | |||
| 388 | .left_margin = 27, | ||
| 389 | .right_margin = 7, | ||
| 390 | .upper_margin = 7, | ||
| 391 | .lower_margin = 8, | ||
| 392 | |||
| 393 | .hsync_len = 6, | ||
| 394 | .vsync_len = 1, | ||
| 395 | }, | ||
| 396 | }; | ||
| 397 | |||
| 398 | static struct pxafb_mach_info palmtc_lcd_screen = { | ||
| 399 | .modes = palmtc_lcd_modes, | ||
| 400 | .num_modes = ARRAY_SIZE(palmtc_lcd_modes), | ||
| 401 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, | ||
| 402 | }; | ||
| 403 | |||
| 404 | /****************************************************************************** | ||
| 405 | * Machine init | ||
| 406 | ******************************************************************************/ | ||
| 407 | static struct platform_device *devices[] __initdata = { | ||
| 408 | &palmtc_backlight, | ||
| 409 | &palmtc_ucb1400_core, | ||
| 410 | &palmtc_keyboard, | ||
| 411 | &palmtc_pxa_keys, | ||
| 412 | &palmtc_flash, | ||
| 413 | }; | ||
| 414 | |||
| 415 | static void __init palmtc_init(void) | ||
| 416 | { | ||
| 417 | pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config)); | ||
| 418 | |||
| 419 | set_pxa_fb_info(&palmtc_lcd_screen); | ||
| 420 | pxa_set_mci_info(&palmtc_mci_platform_data); | ||
| 421 | pxa_set_udc_info(&palmtc_udc_info); | ||
| 422 | pxa_set_ac97_info(NULL); | ||
| 423 | pxa_set_ficp_info(&palmtc_ficp_platform_data); | ||
| 424 | |||
| 425 | platform_add_devices(devices, ARRAY_SIZE(devices)); | ||
| 426 | }; | ||
| 427 | |||
| 428 | MACHINE_START(PALMTC, "Palm Tungsten|C") | ||
| 429 | .phys_io = 0x40000000, | ||
| 430 | .boot_params = 0xa0000100, | ||
| 431 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | ||
| 432 | .map_io = pxa_map_io, | ||
| 433 | .init_irq = pxa25x_init_irq, | ||
| 434 | .timer = &pxa_timer, | ||
| 435 | .init_machine = palmtc_init | ||
| 436 | MACHINE_END | ||
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index d823b09801df..277c4062e3c6 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c | |||
| @@ -117,83 +117,11 @@ static unsigned long palmte2_pin_config[] __initdata = { | |||
| 117 | /****************************************************************************** | 117 | /****************************************************************************** |
| 118 | * SD/MMC card controller | 118 | * SD/MMC card controller |
| 119 | ******************************************************************************/ | 119 | ******************************************************************************/ |
| 120 | static int palmte2_mci_init(struct device *dev, | ||
| 121 | irq_handler_t palmte2_detect_int, void *data) | ||
| 122 | { | ||
| 123 | int err = 0; | ||
| 124 | |||
| 125 | /* Setup an interrupt for detecting card insert/remove events */ | ||
| 126 | err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ"); | ||
| 127 | if (err) | ||
| 128 | goto err; | ||
| 129 | err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N); | ||
| 130 | if (err) | ||
| 131 | goto err2; | ||
| 132 | err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), | ||
| 133 | palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | | ||
| 134 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
| 135 | "SD/MMC card detect", data); | ||
| 136 | if (err) { | ||
| 137 | printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", | ||
| 138 | __func__); | ||
| 139 | goto err2; | ||
| 140 | } | ||
| 141 | |||
| 142 | err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER"); | ||
| 143 | if (err) | ||
| 144 | goto err3; | ||
| 145 | err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0); | ||
| 146 | if (err) | ||
| 147 | goto err4; | ||
| 148 | |||
| 149 | err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY"); | ||
| 150 | if (err) | ||
| 151 | goto err4; | ||
| 152 | err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY); | ||
| 153 | if (err) | ||
| 154 | goto err5; | ||
| 155 | |||
| 156 | printk(KERN_DEBUG "%s: irq registered\n", __func__); | ||
| 157 | |||
| 158 | return 0; | ||
| 159 | |||
| 160 | err5: | ||
| 161 | gpio_free(GPIO_NR_PALMTE2_SD_READONLY); | ||
| 162 | err4: | ||
| 163 | gpio_free(GPIO_NR_PALMTE2_SD_POWER); | ||
| 164 | err3: | ||
| 165 | free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); | ||
| 166 | err2: | ||
| 167 | gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); | ||
| 168 | err: | ||
| 169 | return err; | ||
| 170 | } | ||
| 171 | |||
| 172 | static void palmte2_mci_exit(struct device *dev, void *data) | ||
| 173 | { | ||
| 174 | gpio_free(GPIO_NR_PALMTE2_SD_READONLY); | ||
| 175 | gpio_free(GPIO_NR_PALMTE2_SD_POWER); | ||
| 176 | free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); | ||
| 177 | gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); | ||
| 178 | } | ||
| 179 | |||
| 180 | static void palmte2_mci_power(struct device *dev, unsigned int vdd) | ||
| 181 | { | ||
| 182 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
| 183 | gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd)); | ||
| 184 | } | ||
| 185 | |||
| 186 | static int palmte2_mci_get_ro(struct device *dev) | ||
| 187 | { | ||
| 188 | return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY); | ||
| 189 | } | ||
| 190 | |||
| 191 | static struct pxamci_platform_data palmte2_mci_platform_data = { | 120 | static struct pxamci_platform_data palmte2_mci_platform_data = { |
| 192 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 121 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 193 | .setpower = palmte2_mci_power, | 122 | .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N, |
| 194 | .get_ro = palmte2_mci_get_ro, | 123 | .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY, |
| 195 | .init = palmte2_mci_init, | 124 | .gpio_power = GPIO_NR_PALMTE2_SD_POWER, |
| 196 | .exit = palmte2_mci_exit, | ||
| 197 | }; | 125 | }; |
| 198 | 126 | ||
| 199 | /****************************************************************************** | 127 | /****************************************************************************** |
| @@ -287,35 +215,9 @@ static struct platform_device palmte2_backlight = { | |||
| 287 | /****************************************************************************** | 215 | /****************************************************************************** |
| 288 | * IrDA | 216 | * IrDA |
| 289 | ******************************************************************************/ | 217 | ******************************************************************************/ |
| 290 | static int palmte2_irda_startup(struct device *dev) | ||
| 291 | { | ||
| 292 | int err; | ||
| 293 | err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE"); | ||
| 294 | if (err) | ||
| 295 | goto err; | ||
| 296 | err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1); | ||
| 297 | if (err) | ||
| 298 | gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); | ||
| 299 | err: | ||
| 300 | return err; | ||
| 301 | } | ||
| 302 | |||
| 303 | static void palmte2_irda_shutdown(struct device *dev) | ||
| 304 | { | ||
| 305 | gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); | ||
| 306 | } | ||
| 307 | |||
| 308 | static void palmte2_irda_transceiver_mode(struct device *dev, int mode) | ||
| 309 | { | ||
| 310 | gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF); | ||
| 311 | pxa2xx_transceiver_mode(dev, mode); | ||
| 312 | } | ||
| 313 | |||
| 314 | static struct pxaficp_platform_data palmte2_ficp_platform_data = { | 218 | static struct pxaficp_platform_data palmte2_ficp_platform_data = { |
| 315 | .startup = palmte2_irda_startup, | 219 | .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE, |
| 316 | .shutdown = palmte2_irda_shutdown, | 220 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 317 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | ||
| 318 | .transceiver_mode = palmte2_irda_transceiver_mode, | ||
| 319 | }; | 221 | }; |
| 320 | 222 | ||
| 321 | /****************************************************************************** | 223 | /****************************************************************************** |
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 83d020879581..76a2b37eaf30 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c | |||
| @@ -28,6 +28,10 @@ | |||
| 28 | #include <linux/wm97xx_batt.h> | 28 | #include <linux/wm97xx_batt.h> |
| 29 | #include <linux/power_supply.h> | 29 | #include <linux/power_supply.h> |
| 30 | #include <linux/usb/gpio_vbus.h> | 30 | #include <linux/usb/gpio_vbus.h> |
| 31 | #include <linux/mtd/nand.h> | ||
| 32 | #include <linux/mtd/partitions.h> | ||
| 33 | #include <linux/mtd/mtd.h> | ||
| 34 | #include <linux/mtd/physmap.h> | ||
| 31 | 35 | ||
| 32 | #include <asm/mach-types.h> | 36 | #include <asm/mach-types.h> |
| 33 | #include <asm/mach/arch.h> | 37 | #include <asm/mach/arch.h> |
| @@ -131,6 +135,10 @@ static unsigned long palmtx_pin_config[] __initdata = { | |||
| 131 | GPIO34_FFUART_RXD, | 135 | GPIO34_FFUART_RXD, |
| 132 | GPIO39_FFUART_TXD, | 136 | GPIO39_FFUART_TXD, |
| 133 | 137 | ||
| 138 | /* NAND */ | ||
| 139 | GPIO15_nCS_1, | ||
| 140 | GPIO18_RDY, | ||
| 141 | |||
| 134 | /* MISC. */ | 142 | /* MISC. */ |
| 135 | GPIO10_GPIO, /* hotsync button */ | 143 | GPIO10_GPIO, /* hotsync button */ |
| 136 | GPIO12_GPIO, /* power detect */ | 144 | GPIO12_GPIO, /* power detect */ |
| @@ -138,85 +146,50 @@ static unsigned long palmtx_pin_config[] __initdata = { | |||
| 138 | }; | 146 | }; |
| 139 | 147 | ||
| 140 | /****************************************************************************** | 148 | /****************************************************************************** |
| 141 | * SD/MMC card controller | 149 | * NOR Flash |
| 142 | ******************************************************************************/ | 150 | ******************************************************************************/ |
| 143 | static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int, | 151 | static struct mtd_partition palmtx_partitions[] = { |
| 144 | void *data) | 152 | { |
| 145 | { | 153 | .name = "Flash", |
| 146 | int err = 0; | 154 | .offset = 0x00000000, |
| 147 | 155 | .size = MTDPART_SIZ_FULL, | |
| 148 | /* Setup an interrupt for detecting card insert/remove events */ | 156 | .mask_flags = 0 |
| 149 | err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ"); | ||
| 150 | if (err) | ||
| 151 | goto err; | ||
| 152 | err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N); | ||
| 153 | if (err) | ||
| 154 | goto err2; | ||
| 155 | err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), | ||
| 156 | palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | | ||
| 157 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
| 158 | "SD/MMC card detect", data); | ||
| 159 | if (err) { | ||
| 160 | printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", | ||
| 161 | __func__); | ||
| 162 | goto err2; | ||
| 163 | } | 157 | } |
| 158 | }; | ||
| 164 | 159 | ||
| 165 | err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER"); | 160 | static struct physmap_flash_data palmtx_flash_data[] = { |
| 166 | if (err) | 161 | { |
| 167 | goto err3; | 162 | .width = 2, /* bankwidth in bytes */ |
| 168 | err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0); | 163 | .parts = palmtx_partitions, |
| 169 | if (err) | 164 | .nr_parts = ARRAY_SIZE(palmtx_partitions) |
| 170 | goto err4; | 165 | } |
| 171 | 166 | }; | |
| 172 | err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY"); | ||
| 173 | if (err) | ||
| 174 | goto err4; | ||
| 175 | err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY); | ||
| 176 | if (err) | ||
| 177 | goto err5; | ||
| 178 | |||
| 179 | printk(KERN_DEBUG "%s: irq registered\n", __func__); | ||
| 180 | |||
| 181 | return 0; | ||
| 182 | |||
| 183 | err5: | ||
| 184 | gpio_free(GPIO_NR_PALMTX_SD_READONLY); | ||
| 185 | err4: | ||
| 186 | gpio_free(GPIO_NR_PALMTX_SD_POWER); | ||
| 187 | err3: | ||
| 188 | free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data); | ||
| 189 | err2: | ||
| 190 | gpio_free(GPIO_NR_PALMTX_SD_DETECT_N); | ||
| 191 | err: | ||
| 192 | return err; | ||
| 193 | } | ||
| 194 | |||
| 195 | static void palmtx_mci_exit(struct device *dev, void *data) | ||
| 196 | { | ||
| 197 | gpio_free(GPIO_NR_PALMTX_SD_READONLY); | ||
| 198 | gpio_free(GPIO_NR_PALMTX_SD_POWER); | ||
| 199 | free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data); | ||
| 200 | gpio_free(GPIO_NR_PALMTX_SD_DETECT_N); | ||
| 201 | } | ||
| 202 | 167 | ||
| 203 | static void palmtx_mci_power(struct device *dev, unsigned int vdd) | 168 | static struct resource palmtx_flash_resource = { |
| 204 | { | 169 | .start = PXA_CS0_PHYS, |
| 205 | struct pxamci_platform_data *p_d = dev->platform_data; | 170 | .end = PXA_CS0_PHYS + SZ_8M - 1, |
| 206 | gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd)); | 171 | .flags = IORESOURCE_MEM, |
| 207 | } | 172 | }; |
| 208 | 173 | ||
| 209 | static int palmtx_mci_get_ro(struct device *dev) | 174 | static struct platform_device palmtx_flash = { |
| 210 | { | 175 | .name = "physmap-flash", |
| 211 | return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY); | 176 | .id = 0, |
| 212 | } | 177 | .resource = &palmtx_flash_resource, |
| 178 | .num_resources = 1, | ||
| 179 | .dev = { | ||
| 180 | .platform_data = palmtx_flash_data, | ||
| 181 | }, | ||
| 182 | }; | ||
| 213 | 183 | ||
| 184 | /****************************************************************************** | ||
| 185 | * SD/MMC card controller | ||
| 186 | ******************************************************************************/ | ||
| 214 | static struct pxamci_platform_data palmtx_mci_platform_data = { | 187 | static struct pxamci_platform_data palmtx_mci_platform_data = { |
| 215 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 188 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 216 | .setpower = palmtx_mci_power, | 189 | .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N, |
| 217 | .get_ro = palmtx_mci_get_ro, | 190 | .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY, |
| 218 | .init = palmtx_mci_init, | 191 | .gpio_power = GPIO_NR_PALMTX_SD_POWER, |
| 219 | .exit = palmtx_mci_exit, | 192 | .detect_delay = 20, |
| 220 | }; | 193 | }; |
| 221 | 194 | ||
| 222 | /****************************************************************************** | 195 | /****************************************************************************** |
| @@ -330,35 +303,9 @@ static struct platform_device palmtx_backlight = { | |||
| 330 | /****************************************************************************** | 303 | /****************************************************************************** |
| 331 | * IrDA | 304 | * IrDA |
| 332 | ******************************************************************************/ | 305 | ******************************************************************************/ |
| 333 | static int palmtx_irda_startup(struct device *dev) | ||
| 334 | { | ||
| 335 | int err; | ||
| 336 | err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE"); | ||
| 337 | if (err) | ||
| 338 | goto err; | ||
| 339 | err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1); | ||
| 340 | if (err) | ||
| 341 | gpio_free(GPIO_NR_PALMTX_IR_DISABLE); | ||
| 342 | err: | ||
| 343 | return err; | ||
| 344 | } | ||
| 345 | |||
| 346 | static void palmtx_irda_shutdown(struct device *dev) | ||
| 347 | { | ||
| 348 | gpio_free(GPIO_NR_PALMTX_IR_DISABLE); | ||
| 349 | } | ||
| 350 | |||
| 351 | static void palmtx_irda_transceiver_mode(struct device *dev, int mode) | ||
| 352 | { | ||
| 353 | gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF); | ||
| 354 | pxa2xx_transceiver_mode(dev, mode); | ||
| 355 | } | ||
| 356 | |||
| 357 | static struct pxaficp_platform_data palmtx_ficp_platform_data = { | 306 | static struct pxaficp_platform_data palmtx_ficp_platform_data = { |
| 358 | .startup = palmtx_irda_startup, | 307 | .gpio_pwdown = GPIO_NR_PALMTX_IR_DISABLE, |
| 359 | .shutdown = palmtx_irda_shutdown, | 308 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 360 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | ||
| 361 | .transceiver_mode = palmtx_irda_transceiver_mode, | ||
| 362 | }; | 309 | }; |
| 363 | 310 | ||
| 364 | /****************************************************************************** | 311 | /****************************************************************************** |
| @@ -493,6 +440,68 @@ static struct pxafb_mach_info palmtx_lcd_screen = { | |||
| 493 | }; | 440 | }; |
| 494 | 441 | ||
| 495 | /****************************************************************************** | 442 | /****************************************************************************** |
| 443 | * NAND Flash | ||
| 444 | ******************************************************************************/ | ||
| 445 | static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, | ||
| 446 | unsigned int ctrl) | ||
| 447 | { | ||
| 448 | struct nand_chip *this = mtd->priv; | ||
| 449 | unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; | ||
| 450 | |||
| 451 | if (cmd == NAND_CMD_NONE) | ||
| 452 | return; | ||
| 453 | |||
| 454 | if (ctrl & NAND_CLE) | ||
| 455 | writeb(cmd, PALMTX_NAND_CLE_VIRT); | ||
| 456 | else if (ctrl & NAND_ALE) | ||
| 457 | writeb(cmd, PALMTX_NAND_ALE_VIRT); | ||
| 458 | else | ||
| 459 | writeb(cmd, nandaddr); | ||
| 460 | } | ||
| 461 | |||
| 462 | static struct mtd_partition palmtx_partition_info[] = { | ||
| 463 | [0] = { | ||
| 464 | .name = "palmtx-0", | ||
| 465 | .offset = 0, | ||
| 466 | .size = MTDPART_SIZ_FULL | ||
| 467 | }, | ||
| 468 | }; | ||
| 469 | |||
| 470 | static const char *palmtx_part_probes[] = { "cmdlinepart", NULL }; | ||
| 471 | |||
| 472 | struct platform_nand_data palmtx_nand_platdata = { | ||
| 473 | .chip = { | ||
| 474 | .nr_chips = 1, | ||
| 475 | .chip_offset = 0, | ||
| 476 | .nr_partitions = ARRAY_SIZE(palmtx_partition_info), | ||
| 477 | .partitions = palmtx_partition_info, | ||
| 478 | .chip_delay = 20, | ||
| 479 | .part_probe_types = palmtx_part_probes, | ||
| 480 | }, | ||
| 481 | .ctrl = { | ||
| 482 | .cmd_ctrl = palmtx_nand_cmd_ctl, | ||
| 483 | }, | ||
| 484 | }; | ||
| 485 | |||
| 486 | static struct resource palmtx_nand_resource[] = { | ||
| 487 | [0] = { | ||
| 488 | .start = PXA_CS1_PHYS, | ||
| 489 | .end = PXA_CS1_PHYS + SZ_1M - 1, | ||
| 490 | .flags = IORESOURCE_MEM, | ||
| 491 | }, | ||
| 492 | }; | ||
| 493 | |||
| 494 | static struct platform_device palmtx_nand = { | ||
| 495 | .name = "gen_nand", | ||
| 496 | .num_resources = ARRAY_SIZE(palmtx_nand_resource), | ||
| 497 | .resource = palmtx_nand_resource, | ||
| 498 | .id = -1, | ||
| 499 | .dev = { | ||
| 500 | .platform_data = &palmtx_nand_platdata, | ||
| 501 | } | ||
| 502 | }; | ||
| 503 | |||
| 504 | /****************************************************************************** | ||
| 496 | * Power management - standby | 505 | * Power management - standby |
| 497 | ******************************************************************************/ | 506 | ******************************************************************************/ |
| 498 | static void __init palmtx_pm_init(void) | 507 | static void __init palmtx_pm_init(void) |
| @@ -518,6 +527,8 @@ static struct platform_device *devices[] __initdata = { | |||
| 518 | &power_supply, | 527 | &power_supply, |
| 519 | &palmtx_asoc, | 528 | &palmtx_asoc, |
| 520 | &palmtx_gpio_vbus, | 529 | &palmtx_gpio_vbus, |
| 530 | &palmtx_flash, | ||
| 531 | &palmtx_nand, | ||
| 521 | }; | 532 | }; |
| 522 | 533 | ||
| 523 | static struct map_desc palmtx_io_desc[] __initdata = { | 534 | static struct map_desc palmtx_io_desc[] __initdata = { |
| @@ -525,8 +536,18 @@ static struct map_desc palmtx_io_desc[] __initdata = { | |||
| 525 | .virtual = PALMTX_PCMCIA_VIRT, | 536 | .virtual = PALMTX_PCMCIA_VIRT, |
| 526 | .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS), | 537 | .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS), |
| 527 | .length = PALMTX_PCMCIA_SIZE, | 538 | .length = PALMTX_PCMCIA_SIZE, |
| 528 | .type = MT_DEVICE | 539 | .type = MT_DEVICE, |
| 529 | }, | 540 | }, { |
| 541 | .virtual = PALMTX_NAND_ALE_VIRT, | ||
| 542 | .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS), | ||
| 543 | .length = SZ_1M, | ||
| 544 | .type = MT_DEVICE, | ||
| 545 | }, { | ||
| 546 | .virtual = PALMTX_NAND_CLE_VIRT, | ||
| 547 | .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS), | ||
| 548 | .length = SZ_1M, | ||
| 549 | .type = MT_DEVICE, | ||
| 550 | } | ||
| 530 | }; | 551 | }; |
| 531 | 552 | ||
| 532 | static void __init palmtx_map_io(void) | 553 | static void __init palmtx_map_io(void) |
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index c3645aa3fa3d..c2bf493c5f53 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c | |||
| @@ -129,88 +129,14 @@ static unsigned long palmz72_pin_config[] __initdata = { | |||
| 129 | /****************************************************************************** | 129 | /****************************************************************************** |
| 130 | * SD/MMC card controller | 130 | * SD/MMC card controller |
| 131 | ******************************************************************************/ | 131 | ******************************************************************************/ |
| 132 | static int palmz72_mci_init(struct device *dev, | 132 | /* SD_POWER is not actually power, but it is more like chip |
| 133 | irq_handler_t palmz72_detect_int, void *data) | 133 | * select, i.e. it is inverted */ |
| 134 | { | ||
| 135 | int err = 0; | ||
| 136 | |||
| 137 | /* Setup an interrupt for detecting card insert/remove events */ | ||
| 138 | err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ"); | ||
| 139 | if (err) | ||
| 140 | goto err; | ||
| 141 | err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N); | ||
| 142 | if (err) | ||
| 143 | goto err2; | ||
| 144 | err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), | ||
| 145 | palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | | ||
| 146 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
| 147 | "SD/MMC card detect", data); | ||
| 148 | if (err) { | ||
| 149 | printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", | ||
| 150 | __func__); | ||
| 151 | goto err2; | ||
| 152 | } | ||
| 153 | |||
| 154 | /* SD_POWER is not actually power, but it is more like chip | ||
| 155 | * select, i.e. it is inverted */ | ||
| 156 | |||
| 157 | err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER"); | ||
| 158 | if (err) | ||
| 159 | goto err3; | ||
| 160 | err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0); | ||
| 161 | if (err) | ||
| 162 | goto err4; | ||
| 163 | err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO"); | ||
| 164 | if (err) | ||
| 165 | goto err4; | ||
| 166 | err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO); | ||
| 167 | if (err) | ||
| 168 | goto err5; | ||
| 169 | |||
| 170 | printk(KERN_DEBUG "%s: irq registered\n", __func__); | ||
| 171 | |||
| 172 | return 0; | ||
| 173 | |||
| 174 | err5: | ||
| 175 | gpio_free(GPIO_NR_PALMZ72_SD_RO); | ||
| 176 | err4: | ||
| 177 | gpio_free(GPIO_NR_PALMZ72_SD_POWER_N); | ||
| 178 | err3: | ||
| 179 | free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data); | ||
| 180 | err2: | ||
| 181 | gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N); | ||
| 182 | err: | ||
| 183 | return err; | ||
| 184 | } | ||
| 185 | |||
| 186 | static void palmz72_mci_exit(struct device *dev, void *data) | ||
| 187 | { | ||
| 188 | gpio_free(GPIO_NR_PALMZ72_SD_POWER_N); | ||
| 189 | free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data); | ||
| 190 | gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N); | ||
| 191 | gpio_free(GPIO_NR_PALMZ72_SD_RO); | ||
| 192 | } | ||
| 193 | |||
| 194 | static void palmz72_mci_power(struct device *dev, unsigned int vdd) | ||
| 195 | { | ||
| 196 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
| 197 | if (p_d->ocr_mask & (1 << vdd)) | ||
| 198 | gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0); | ||
| 199 | else | ||
| 200 | gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1); | ||
| 201 | } | ||
| 202 | |||
| 203 | static int palmz72_mci_ro(struct device *dev) | ||
| 204 | { | ||
| 205 | return gpio_get_value(GPIO_NR_PALMZ72_SD_RO); | ||
| 206 | } | ||
| 207 | |||
| 208 | static struct pxamci_platform_data palmz72_mci_platform_data = { | 134 | static struct pxamci_platform_data palmz72_mci_platform_data = { |
| 209 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 135 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 210 | .setpower = palmz72_mci_power, | 136 | .gpio_card_detect = GPIO_NR_PALMZ72_SD_DETECT_N, |
| 211 | .get_ro = palmz72_mci_ro, | 137 | .gpio_card_ro = GPIO_NR_PALMZ72_SD_RO, |
| 212 | .init = palmz72_mci_init, | 138 | .gpio_power = GPIO_NR_PALMZ72_SD_POWER_N, |
| 213 | .exit = palmz72_mci_exit, | 139 | .gpio_power_invert = 1, |
| 214 | }; | 140 | }; |
| 215 | 141 | ||
| 216 | /****************************************************************************** | 142 | /****************************************************************************** |
| @@ -304,35 +230,9 @@ static struct platform_device palmz72_backlight = { | |||
| 304 | /****************************************************************************** | 230 | /****************************************************************************** |
| 305 | * IrDA | 231 | * IrDA |
| 306 | ******************************************************************************/ | 232 | ******************************************************************************/ |
| 307 | static int palmz72_irda_startup(struct device *dev) | ||
| 308 | { | ||
| 309 | int err; | ||
| 310 | err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE"); | ||
| 311 | if (err) | ||
| 312 | goto err; | ||
| 313 | err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1); | ||
| 314 | if (err) | ||
| 315 | gpio_free(GPIO_NR_PALMZ72_IR_DISABLE); | ||
| 316 | err: | ||
| 317 | return err; | ||
| 318 | } | ||
| 319 | |||
| 320 | static void palmz72_irda_shutdown(struct device *dev) | ||
| 321 | { | ||
| 322 | gpio_free(GPIO_NR_PALMZ72_IR_DISABLE); | ||
| 323 | } | ||
| 324 | |||
| 325 | static void palmz72_irda_transceiver_mode(struct device *dev, int mode) | ||
| 326 | { | ||
| 327 | gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF); | ||
| 328 | pxa2xx_transceiver_mode(dev, mode); | ||
| 329 | } | ||
| 330 | |||
| 331 | static struct pxaficp_platform_data palmz72_ficp_platform_data = { | 233 | static struct pxaficp_platform_data palmz72_ficp_platform_data = { |
| 332 | .startup = palmz72_irda_startup, | 234 | .gpio_pwdown = GPIO_NR_PALMZ72_IR_DISABLE, |
| 333 | .shutdown = palmz72_irda_shutdown, | ||
| 334 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 235 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 335 | .transceiver_mode = palmz72_irda_transceiver_mode, | ||
| 336 | }; | 236 | }; |
| 337 | 237 | ||
| 338 | /****************************************************************************** | 238 | /****************************************************************************** |
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 01791d74e08e..bbda57078e0f 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c | |||
| @@ -321,11 +321,14 @@ static void pcm990_mci_exit(struct device *dev, void *data) | |||
| 321 | #define MSECS_PER_JIFFY (1000/HZ) | 321 | #define MSECS_PER_JIFFY (1000/HZ) |
| 322 | 322 | ||
| 323 | static struct pxamci_platform_data pcm990_mci_platform_data = { | 323 | static struct pxamci_platform_data pcm990_mci_platform_data = { |
| 324 | .detect_delay = 250 / MSECS_PER_JIFFY, | 324 | .detect_delay = 250 / MSECS_PER_JIFFY, |
| 325 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 325 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 326 | .init = pcm990_mci_init, | 326 | .init = pcm990_mci_init, |
| 327 | .setpower = pcm990_mci_setpower, | 327 | .setpower = pcm990_mci_setpower, |
| 328 | .exit = pcm990_mci_exit, | 328 | .exit = pcm990_mci_exit, |
| 329 | .gpio_card_detect = -1, | ||
| 330 | .gpio_card_ro = -1, | ||
| 331 | .gpio_power = -1, | ||
| 329 | }; | 332 | }; |
| 330 | 333 | ||
| 331 | static struct pxaohci_platform_data pcm990_ohci_platform_data = { | 334 | static struct pxaohci_platform_data pcm990_ohci_platform_data = { |
| @@ -427,25 +430,56 @@ static void pcm990_camera_free_bus(struct soc_camera_link *link) | |||
| 427 | gpio_bus_switch = -EINVAL; | 430 | gpio_bus_switch = -EINVAL; |
| 428 | } | 431 | } |
| 429 | 432 | ||
| 430 | static struct soc_camera_link iclink = { | ||
| 431 | .bus_id = 0, /* Must match with the camera ID above */ | ||
| 432 | .query_bus_param = pcm990_camera_query_bus_param, | ||
| 433 | .set_bus_param = pcm990_camera_set_bus_param, | ||
| 434 | .free_bus = pcm990_camera_free_bus, | ||
| 435 | }; | ||
| 436 | |||
| 437 | /* Board I2C devices. */ | 433 | /* Board I2C devices. */ |
| 438 | static struct i2c_board_info __initdata pcm990_i2c_devices[] = { | 434 | static struct i2c_board_info __initdata pcm990_i2c_devices[] = { |
| 439 | { | 435 | { |
| 440 | /* Must initialize before the camera(s) */ | 436 | /* Must initialize before the camera(s) */ |
| 441 | I2C_BOARD_INFO("pca9536", 0x41), | 437 | I2C_BOARD_INFO("pca9536", 0x41), |
| 442 | .platform_data = &pca9536_data, | 438 | .platform_data = &pca9536_data, |
| 443 | }, { | 439 | }, |
| 440 | }; | ||
| 441 | |||
| 442 | static struct i2c_board_info pcm990_camera_i2c[] = { | ||
| 443 | { | ||
| 444 | I2C_BOARD_INFO("mt9v022", 0x48), | 444 | I2C_BOARD_INFO("mt9v022", 0x48), |
| 445 | .platform_data = &iclink, /* With extender */ | ||
| 446 | }, { | 445 | }, { |
| 447 | I2C_BOARD_INFO("mt9m001", 0x5d), | 446 | I2C_BOARD_INFO("mt9m001", 0x5d), |
| 448 | .platform_data = &iclink, /* With extender */ | 447 | }, |
| 448 | }; | ||
| 449 | |||
| 450 | static struct soc_camera_link iclink[] = { | ||
| 451 | { | ||
| 452 | .bus_id = 0, /* Must match with the camera ID */ | ||
| 453 | .board_info = &pcm990_camera_i2c[0], | ||
| 454 | .i2c_adapter_id = 0, | ||
| 455 | .query_bus_param = pcm990_camera_query_bus_param, | ||
| 456 | .set_bus_param = pcm990_camera_set_bus_param, | ||
| 457 | .free_bus = pcm990_camera_free_bus, | ||
| 458 | .module_name = "mt9v022", | ||
| 459 | }, { | ||
| 460 | .bus_id = 0, /* Must match with the camera ID */ | ||
| 461 | .board_info = &pcm990_camera_i2c[1], | ||
| 462 | .i2c_adapter_id = 0, | ||
| 463 | .query_bus_param = pcm990_camera_query_bus_param, | ||
| 464 | .set_bus_param = pcm990_camera_set_bus_param, | ||
| 465 | .free_bus = pcm990_camera_free_bus, | ||
| 466 | .module_name = "mt9m001", | ||
| 467 | }, | ||
| 468 | }; | ||
| 469 | |||
| 470 | static struct platform_device pcm990_camera[] = { | ||
| 471 | { | ||
| 472 | .name = "soc-camera-pdrv", | ||
| 473 | .id = 0, | ||
| 474 | .dev = { | ||
| 475 | .platform_data = &iclink[0], | ||
| 476 | }, | ||
| 477 | }, { | ||
| 478 | .name = "soc-camera-pdrv", | ||
| 479 | .id = 1, | ||
| 480 | .dev = { | ||
| 481 | .platform_data = &iclink[1], | ||
| 482 | }, | ||
| 449 | }, | 483 | }, |
| 450 | }; | 484 | }; |
| 451 | #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ | 485 | #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ |
| @@ -501,6 +535,9 @@ void __init pcm990_baseboard_init(void) | |||
| 501 | pxa_set_camera_info(&pcm990_pxacamera_platform_data); | 535 | pxa_set_camera_info(&pcm990_pxacamera_platform_data); |
| 502 | 536 | ||
| 503 | i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); | 537 | i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); |
| 538 | |||
| 539 | platform_device_register(&pcm990_camera[0]); | ||
| 540 | platform_device_register(&pcm990_camera[1]); | ||
| 504 | #endif | 541 | #endif |
| 505 | 542 | ||
| 506 | printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); | 543 | printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); |
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 9352d4a34837..a186994f77fb 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c | |||
| @@ -245,20 +245,10 @@ static inline void poodle_init_spi(void) {} | |||
| 245 | * The card detect interrupt isn't debounced so we delay it by 250ms | 245 | * The card detect interrupt isn't debounced so we delay it by 250ms |
| 246 | * to give the card a chance to fully insert/eject. | 246 | * to give the card a chance to fully insert/eject. |
| 247 | */ | 247 | */ |
| 248 | static struct pxamci_platform_data poodle_mci_platform_data; | ||
| 249 | |||
| 250 | static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data) | 248 | static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data) |
| 251 | { | 249 | { |
| 252 | int err; | 250 | int err; |
| 253 | 251 | ||
| 254 | err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT"); | ||
| 255 | if (err) | ||
| 256 | goto err_out; | ||
| 257 | |||
| 258 | err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP"); | ||
| 259 | if (err) | ||
| 260 | goto err_free_1; | ||
| 261 | |||
| 262 | err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR"); | 252 | err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR"); |
| 263 | if (err) | 253 | if (err) |
| 264 | goto err_free_2; | 254 | goto err_free_2; |
| @@ -267,34 +257,14 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, | |||
| 267 | if (err) | 257 | if (err) |
| 268 | goto err_free_3; | 258 | goto err_free_3; |
| 269 | 259 | ||
| 270 | gpio_direction_input(POODLE_GPIO_nSD_DETECT); | ||
| 271 | gpio_direction_input(POODLE_GPIO_nSD_WP); | ||
| 272 | |||
| 273 | gpio_direction_output(POODLE_GPIO_SD_PWR, 0); | 260 | gpio_direction_output(POODLE_GPIO_SD_PWR, 0); |
| 274 | gpio_direction_output(POODLE_GPIO_SD_PWR1, 0); | 261 | gpio_direction_output(POODLE_GPIO_SD_PWR1, 0); |
| 275 | 262 | ||
| 276 | poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 277 | |||
| 278 | err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, | ||
| 279 | IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | ||
| 280 | "MMC card detect", data); | ||
| 281 | if (err) { | ||
| 282 | pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", | ||
| 283 | __func__); | ||
| 284 | goto err_free_4; | ||
| 285 | } | ||
| 286 | |||
| 287 | return 0; | 263 | return 0; |
| 288 | 264 | ||
| 289 | err_free_4: | ||
| 290 | gpio_free(POODLE_GPIO_SD_PWR1); | ||
| 291 | err_free_3: | 265 | err_free_3: |
| 292 | gpio_free(POODLE_GPIO_SD_PWR); | 266 | gpio_free(POODLE_GPIO_SD_PWR); |
| 293 | err_free_2: | 267 | err_free_2: |
| 294 | gpio_free(POODLE_GPIO_nSD_WP); | ||
| 295 | err_free_1: | ||
| 296 | gpio_free(POODLE_GPIO_nSD_DETECT); | ||
| 297 | err_out: | ||
| 298 | return err; | 268 | return err; |
| 299 | } | 269 | } |
| 300 | 270 | ||
| @@ -312,62 +282,29 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd) | |||
| 312 | } | 282 | } |
| 313 | } | 283 | } |
| 314 | 284 | ||
| 315 | static int poodle_mci_get_ro(struct device *dev) | ||
| 316 | { | ||
| 317 | return !!gpio_get_value(POODLE_GPIO_nSD_WP); | ||
| 318 | return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP); | ||
| 319 | } | ||
| 320 | |||
| 321 | |||
| 322 | static void poodle_mci_exit(struct device *dev, void *data) | 285 | static void poodle_mci_exit(struct device *dev, void *data) |
| 323 | { | 286 | { |
| 324 | free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); | ||
| 325 | gpio_free(POODLE_GPIO_SD_PWR1); | 287 | gpio_free(POODLE_GPIO_SD_PWR1); |
| 326 | gpio_free(POODLE_GPIO_SD_PWR); | 288 | gpio_free(POODLE_GPIO_SD_PWR); |
| 327 | gpio_free(POODLE_GPIO_nSD_WP); | ||
| 328 | gpio_free(POODLE_GPIO_nSD_DETECT); | ||
| 329 | } | 289 | } |
| 330 | 290 | ||
| 331 | static struct pxamci_platform_data poodle_mci_platform_data = { | 291 | static struct pxamci_platform_data poodle_mci_platform_data = { |
| 332 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 292 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 333 | .init = poodle_mci_init, | 293 | .init = poodle_mci_init, |
| 334 | .get_ro = poodle_mci_get_ro, | 294 | .setpower = poodle_mci_setpower, |
| 335 | .setpower = poodle_mci_setpower, | 295 | .exit = poodle_mci_exit, |
| 336 | .exit = poodle_mci_exit, | 296 | .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT, |
| 297 | .gpio_card_ro = POODLE_GPIO_nSD_WP, | ||
| 298 | .gpio_power = -1, | ||
| 337 | }; | 299 | }; |
| 338 | 300 | ||
| 339 | 301 | ||
| 340 | /* | 302 | /* |
| 341 | * Irda | 303 | * Irda |
| 342 | */ | 304 | */ |
| 343 | static void poodle_irda_transceiver_mode(struct device *dev, int mode) | ||
| 344 | { | ||
| 345 | gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF); | ||
| 346 | pxa2xx_transceiver_mode(dev, mode); | ||
| 347 | } | ||
| 348 | |||
| 349 | static int poodle_irda_startup(struct device *dev) | ||
| 350 | { | ||
| 351 | int err; | ||
| 352 | |||
| 353 | err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON"); | ||
| 354 | if (err) | ||
| 355 | return err; | ||
| 356 | |||
| 357 | gpio_direction_output(POODLE_GPIO_IR_ON, 1); | ||
| 358 | return 0; | ||
| 359 | } | ||
| 360 | |||
| 361 | static void poodle_irda_shutdown(struct device *dev) | ||
| 362 | { | ||
| 363 | gpio_free(POODLE_GPIO_IR_ON); | ||
| 364 | } | ||
| 365 | |||
| 366 | static struct pxaficp_platform_data poodle_ficp_platform_data = { | 305 | static struct pxaficp_platform_data poodle_ficp_platform_data = { |
| 306 | .gpio_pwdown = POODLE_GPIO_IR_ON, | ||
| 367 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 307 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 368 | .transceiver_mode = poodle_irda_transceiver_mode, | ||
| 369 | .startup = poodle_irda_startup, | ||
| 370 | .shutdown = poodle_irda_shutdown, | ||
| 371 | }; | 308 | }; |
| 372 | 309 | ||
| 373 | 310 | ||
| @@ -521,6 +458,7 @@ static void __init poodle_init(void) | |||
| 521 | set_pxa_fb_parent(&poodle_locomo_device.dev); | 458 | set_pxa_fb_parent(&poodle_locomo_device.dev); |
| 522 | set_pxa_fb_info(&poodle_fb_info); | 459 | set_pxa_fb_info(&poodle_fb_info); |
| 523 | pxa_set_udc_info(&udc_info); | 460 | pxa_set_udc_info(&udc_info); |
| 461 | poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 524 | pxa_set_mci_info(&poodle_mci_platform_data); | 462 | pxa_set_mci_info(&poodle_mci_platform_data); |
| 525 | pxa_set_ficp_info(&poodle_ficp_platform_data); | 463 | pxa_set_ficp_info(&poodle_ficp_platform_data); |
| 526 | pxa_set_i2c_info(NULL); | 464 | pxa_set_i2c_info(NULL); |
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 2f3394f85917..868270421b8c 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c | |||
| @@ -52,3 +52,4 @@ void pxa2xx_transceiver_mode(struct device *dev, int mode) | |||
| 52 | } else | 52 | } else |
| 53 | BUG(); | 53 | BUG(); |
| 54 | } | 54 | } |
| 55 | EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode); | ||
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 4ba6d21f851c..f4af6e2bef89 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c | |||
| @@ -84,9 +84,11 @@ static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = { | |||
| 84 | }; | 84 | }; |
| 85 | 85 | ||
| 86 | static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0); | 86 | static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0); |
| 87 | static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); | ||
| 87 | 88 | ||
| 88 | static struct clk_lookup common_clkregs[] = { | 89 | static struct clk_lookup common_clkregs[] = { |
| 89 | INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), | 90 | INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), |
| 91 | INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), | ||
| 90 | }; | 92 | }; |
| 91 | 93 | ||
| 92 | static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); | 94 | static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); |
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 8b3d97efadab..c7373e74a109 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c | |||
| @@ -78,9 +78,11 @@ static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = { | |||
| 78 | }; | 78 | }; |
| 79 | 79 | ||
| 80 | static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0); | 80 | static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0); |
| 81 | static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); | ||
| 81 | 82 | ||
| 82 | static struct clk_lookup pxa320_clkregs[] = { | 83 | static struct clk_lookup pxa320_clkregs[] = { |
| 83 | INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), | 84 | INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), |
| 85 | INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), | ||
| 84 | }; | 86 | }; |
| 85 | 87 | ||
| 86 | static int __init pxa320_init(void) | 88 | static int __init pxa320_init(void) |
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 71131742fffd..064292008288 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c | |||
| @@ -176,13 +176,30 @@ static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = { | |||
| 176 | MFP_ADDR_END, | 176 | MFP_ADDR_END, |
| 177 | }; | 177 | }; |
| 178 | 178 | ||
| 179 | static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = { | ||
| 180 | MFP_ADDR(GPIO159, 0x0524), | ||
| 181 | MFP_ADDR(GPIO163, 0x0534), | ||
| 182 | MFP_ADDR(GPIO167, 0x0544), | ||
| 183 | MFP_ADDR(GPIO168, 0x0548), | ||
| 184 | MFP_ADDR(GPIO169, 0x054c), | ||
| 185 | MFP_ADDR(GPIO170, 0x0550), | ||
| 186 | MFP_ADDR(GPIO171, 0x0554), | ||
| 187 | MFP_ADDR(GPIO172, 0x0558), | ||
| 188 | MFP_ADDR(GPIO173, 0x055c), | ||
| 189 | |||
| 190 | MFP_ADDR_END, | ||
| 191 | }; | ||
| 192 | |||
| 179 | static int __init pxa930_init(void) | 193 | static int __init pxa930_init(void) |
| 180 | { | 194 | { |
| 181 | if (cpu_is_pxa930()) { | 195 | if (cpu_is_pxa930() || cpu_is_pxa935()) { |
| 182 | mfp_init_base(io_p2v(MFPR_BASE)); | 196 | mfp_init_base(io_p2v(MFPR_BASE)); |
| 183 | mfp_init_addr(pxa930_mfp_addr_map); | 197 | mfp_init_addr(pxa930_mfp_addr_map); |
| 184 | } | 198 | } |
| 185 | 199 | ||
| 200 | if (cpu_is_pxa935()) | ||
| 201 | mfp_init_addr(pxa935_mfp_addr_map); | ||
| 202 | |||
| 186 | return 0; | 203 | return 0; |
| 187 | } | 204 | } |
| 188 | 205 | ||
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index dda310fe71c8..ee8d6038ce82 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c | |||
| @@ -24,6 +24,7 @@ | |||
| 24 | #include <linux/spi/ads7846.h> | 24 | #include <linux/spi/ads7846.h> |
| 25 | #include <linux/spi/corgi_lcd.h> | 25 | #include <linux/spi/corgi_lcd.h> |
| 26 | #include <linux/mtd/sharpsl.h> | 26 | #include <linux/mtd/sharpsl.h> |
| 27 | #include <linux/input/matrix_keypad.h> | ||
| 27 | 28 | ||
| 28 | #include <asm/setup.h> | 29 | #include <asm/setup.h> |
| 29 | #include <asm/mach-types.h> | 30 | #include <asm/mach-types.h> |
| @@ -111,6 +112,26 @@ static unsigned long spitz_pin_config[] __initdata = { | |||
| 111 | GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */ | 112 | GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */ |
| 112 | GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */ | 113 | GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */ |
| 113 | 114 | ||
| 115 | /* GPIO matrix keypad */ | ||
| 116 | GPIO88_GPIO, /* column 0 */ | ||
| 117 | GPIO23_GPIO, /* column 1 */ | ||
| 118 | GPIO24_GPIO, /* column 2 */ | ||
| 119 | GPIO25_GPIO, /* column 3 */ | ||
| 120 | GPIO26_GPIO, /* column 4 */ | ||
| 121 | GPIO27_GPIO, /* column 5 */ | ||
| 122 | GPIO52_GPIO, /* column 6 */ | ||
| 123 | GPIO103_GPIO, /* column 7 */ | ||
| 124 | GPIO107_GPIO, /* column 8 */ | ||
| 125 | GPIO108_GPIO, /* column 9 */ | ||
| 126 | GPIO114_GPIO, /* column 10 */ | ||
| 127 | GPIO12_GPIO, /* row 0 */ | ||
| 128 | GPIO17_GPIO, /* row 1 */ | ||
| 129 | GPIO91_GPIO, /* row 2 */ | ||
| 130 | GPIO34_GPIO, /* row 3 */ | ||
| 131 | GPIO36_GPIO, /* row 4 */ | ||
| 132 | GPIO38_GPIO, /* row 5 */ | ||
| 133 | GPIO39_GPIO, /* row 6 */ | ||
| 134 | |||
| 114 | /* I2C */ | 135 | /* I2C */ |
| 115 | GPIO117_I2C_SCL, | 136 | GPIO117_I2C_SCL, |
| 116 | GPIO118_I2C_SDA, | 137 | GPIO118_I2C_SDA, |
| @@ -242,9 +263,115 @@ EXPORT_SYMBOL(spitzscoop2_device); | |||
| 242 | /* | 263 | /* |
| 243 | * Spitz Keyboard Device | 264 | * Spitz Keyboard Device |
| 244 | */ | 265 | */ |
| 266 | #define SPITZ_KEY_CALENDAR KEY_F1 | ||
| 267 | #define SPITZ_KEY_ADDRESS KEY_F2 | ||
| 268 | #define SPITZ_KEY_FN KEY_F3 | ||
| 269 | #define SPITZ_KEY_CANCEL KEY_F4 | ||
| 270 | #define SPITZ_KEY_EXOK KEY_F5 | ||
| 271 | #define SPITZ_KEY_EXCANCEL KEY_F6 | ||
| 272 | #define SPITZ_KEY_EXJOGDOWN KEY_F7 | ||
| 273 | #define SPITZ_KEY_EXJOGUP KEY_F8 | ||
| 274 | #define SPITZ_KEY_JAP1 KEY_LEFTALT | ||
| 275 | #define SPITZ_KEY_JAP2 KEY_RIGHTCTRL | ||
| 276 | #define SPITZ_KEY_SYNC KEY_F9 | ||
| 277 | #define SPITZ_KEY_MAIL KEY_F10 | ||
| 278 | #define SPITZ_KEY_OK KEY_F11 | ||
| 279 | #define SPITZ_KEY_MENU KEY_F12 | ||
| 280 | |||
| 281 | static const uint32_t spitzkbd_keymap[] = { | ||
| 282 | KEY(0, 0, KEY_LEFTCTRL), | ||
| 283 | KEY(0, 1, KEY_1), | ||
| 284 | KEY(0, 2, KEY_3), | ||
| 285 | KEY(0, 3, KEY_5), | ||
| 286 | KEY(0, 4, KEY_6), | ||
| 287 | KEY(0, 5, KEY_7), | ||
| 288 | KEY(0, 6, KEY_9), | ||
| 289 | KEY(0, 7, KEY_0), | ||
| 290 | KEY(0, 8, KEY_BACKSPACE), | ||
| 291 | KEY(0, 9, SPITZ_KEY_EXOK), /* EXOK */ | ||
| 292 | KEY(0, 10, SPITZ_KEY_EXCANCEL), /* EXCANCEL */ | ||
| 293 | KEY(1, 1, KEY_2), | ||
| 294 | KEY(1, 2, KEY_4), | ||
| 295 | KEY(1, 3, KEY_R), | ||
| 296 | KEY(1, 4, KEY_Y), | ||
| 297 | KEY(1, 5, KEY_8), | ||
| 298 | KEY(1, 6, KEY_I), | ||
| 299 | KEY(1, 7, KEY_O), | ||
| 300 | KEY(1, 8, KEY_P), | ||
| 301 | KEY(1, 9, SPITZ_KEY_EXJOGDOWN), /* EXJOGDOWN */ | ||
| 302 | KEY(1, 10, SPITZ_KEY_EXJOGUP), /* EXJOGUP */ | ||
| 303 | KEY(2, 0, KEY_TAB), | ||
| 304 | KEY(2, 1, KEY_Q), | ||
| 305 | KEY(2, 2, KEY_E), | ||
| 306 | KEY(2, 3, KEY_T), | ||
| 307 | KEY(2, 4, KEY_G), | ||
| 308 | KEY(2, 5, KEY_U), | ||
| 309 | KEY(2, 6, KEY_J), | ||
| 310 | KEY(2, 7, KEY_K), | ||
| 311 | KEY(3, 0, SPITZ_KEY_ADDRESS), /* ADDRESS */ | ||
| 312 | KEY(3, 1, KEY_W), | ||
| 313 | KEY(3, 2, KEY_S), | ||
| 314 | KEY(3, 3, KEY_F), | ||
| 315 | KEY(3, 4, KEY_V), | ||
| 316 | KEY(3, 5, KEY_H), | ||
| 317 | KEY(3, 6, KEY_M), | ||
| 318 | KEY(3, 7, KEY_L), | ||
| 319 | KEY(3, 9, KEY_RIGHTSHIFT), | ||
| 320 | KEY(4, 0, SPITZ_KEY_CALENDAR), /* CALENDAR */ | ||
| 321 | KEY(4, 1, KEY_A), | ||
| 322 | KEY(4, 2, KEY_D), | ||
| 323 | KEY(4, 3, KEY_C), | ||
| 324 | KEY(4, 4, KEY_B), | ||
| 325 | KEY(4, 5, KEY_N), | ||
| 326 | KEY(4, 6, KEY_DOT), | ||
| 327 | KEY(4, 8, KEY_ENTER), | ||
| 328 | KEY(4, 9, KEY_LEFTSHIFT), | ||
| 329 | KEY(5, 0, SPITZ_KEY_MAIL), /* MAIL */ | ||
| 330 | KEY(5, 1, KEY_Z), | ||
| 331 | KEY(5, 2, KEY_X), | ||
| 332 | KEY(5, 3, KEY_MINUS), | ||
| 333 | KEY(5, 4, KEY_SPACE), | ||
| 334 | KEY(5, 5, KEY_COMMA), | ||
| 335 | KEY(5, 7, KEY_UP), | ||
| 336 | KEY(5, 10, SPITZ_KEY_FN), /* FN */ | ||
| 337 | KEY(6, 0, KEY_SYSRQ), | ||
| 338 | KEY(6, 1, SPITZ_KEY_JAP1), /* JAP1 */ | ||
| 339 | KEY(6, 2, SPITZ_KEY_JAP2), /* JAP2 */ | ||
| 340 | KEY(6, 3, SPITZ_KEY_CANCEL), /* CANCEL */ | ||
| 341 | KEY(6, 4, SPITZ_KEY_OK), /* OK */ | ||
| 342 | KEY(6, 5, SPITZ_KEY_MENU), /* MENU */ | ||
| 343 | KEY(6, 6, KEY_LEFT), | ||
| 344 | KEY(6, 7, KEY_DOWN), | ||
| 345 | KEY(6, 8, KEY_RIGHT), | ||
| 346 | }; | ||
| 347 | |||
| 348 | static const struct matrix_keymap_data spitzkbd_keymap_data = { | ||
| 349 | .keymap = spitzkbd_keymap, | ||
| 350 | .keymap_size = ARRAY_SIZE(spitzkbd_keymap), | ||
| 351 | }; | ||
| 352 | |||
| 353 | static const uint32_t spitzkbd_row_gpios[] = | ||
| 354 | { 12, 17, 91, 34, 36, 38, 39 }; | ||
| 355 | static const uint32_t spitzkbd_col_gpios[] = | ||
| 356 | { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; | ||
| 357 | |||
| 358 | static struct matrix_keypad_platform_data spitzkbd_pdata = { | ||
| 359 | .keymap_data = &spitzkbd_keymap_data, | ||
| 360 | .row_gpios = spitzkbd_row_gpios, | ||
| 361 | .col_gpios = spitzkbd_col_gpios, | ||
| 362 | .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios), | ||
| 363 | .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios), | ||
| 364 | .col_scan_delay_us = 10, | ||
| 365 | .debounce_ms = 10, | ||
| 366 | .wakeup = 1, | ||
| 367 | }; | ||
| 368 | |||
| 245 | static struct platform_device spitzkbd_device = { | 369 | static struct platform_device spitzkbd_device = { |
| 246 | .name = "spitz-keyboard", | 370 | .name = "matrix-keypad", |
| 247 | .id = -1, | 371 | .id = -1, |
| 372 | .dev = { | ||
| 373 | .platform_data = &spitzkbd_pdata, | ||
| 374 | }, | ||
| 248 | }; | 375 | }; |
| 249 | 376 | ||
| 250 | 377 | ||
| @@ -296,6 +423,7 @@ static struct ads7846_platform_data spitz_ads7846_info = { | |||
| 296 | .vref_delay_usecs = 100, | 423 | .vref_delay_usecs = 100, |
| 297 | .x_plate_ohms = 419, | 424 | .x_plate_ohms = 419, |
| 298 | .y_plate_ohms = 486, | 425 | .y_plate_ohms = 486, |
| 426 | .pressure_max = 1024, | ||
| 299 | .gpio_pendown = SPITZ_GPIO_TP_INT, | 427 | .gpio_pendown = SPITZ_GPIO_TP_INT, |
| 300 | .wait_for_sync = spitz_wait_for_hsync, | 428 | .wait_for_sync = spitz_wait_for_hsync, |
| 301 | }; | 429 | }; |
| @@ -378,45 +506,6 @@ static inline void spitz_init_spi(void) {} | |||
| 378 | * The card detect interrupt isn't debounced so we delay it by 250ms | 506 | * The card detect interrupt isn't debounced so we delay it by 250ms |
| 379 | * to give the card a chance to fully insert/eject. | 507 | * to give the card a chance to fully insert/eject. |
| 380 | */ | 508 | */ |
| 381 | |||
| 382 | static struct pxamci_platform_data spitz_mci_platform_data; | ||
| 383 | |||
| 384 | static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data) | ||
| 385 | { | ||
| 386 | int err; | ||
| 387 | |||
| 388 | err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT"); | ||
| 389 | if (err) | ||
| 390 | goto err_out; | ||
| 391 | |||
| 392 | err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP"); | ||
| 393 | if (err) | ||
| 394 | goto err_free_1; | ||
| 395 | |||
| 396 | gpio_direction_input(SPITZ_GPIO_nSD_DETECT); | ||
| 397 | gpio_direction_input(SPITZ_GPIO_nSD_WP); | ||
| 398 | |||
| 399 | spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 400 | |||
| 401 | err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, | ||
| 402 | IRQF_DISABLED | IRQF_TRIGGER_RISING | | ||
| 403 | IRQF_TRIGGER_FALLING, | ||
| 404 | "MMC card detect", data); | ||
| 405 | if (err) { | ||
| 406 | pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", | ||
| 407 | __func__); | ||
| 408 | goto err_free_2; | ||
| 409 | } | ||
| 410 | return 0; | ||
| 411 | |||
| 412 | err_free_2: | ||
| 413 | gpio_free(SPITZ_GPIO_nSD_WP); | ||
| 414 | err_free_1: | ||
| 415 | gpio_free(SPITZ_GPIO_nSD_DETECT); | ||
| 416 | err_out: | ||
| 417 | return err; | ||
| 418 | } | ||
| 419 | |||
| 420 | static void spitz_mci_setpower(struct device *dev, unsigned int vdd) | 509 | static void spitz_mci_setpower(struct device *dev, unsigned int vdd) |
| 421 | { | 510 | { |
| 422 | struct pxamci_platform_data* p_d = dev->platform_data; | 511 | struct pxamci_platform_data* p_d = dev->platform_data; |
| @@ -427,24 +516,12 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) | |||
| 427 | spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); | 516 | spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); |
| 428 | } | 517 | } |
| 429 | 518 | ||
| 430 | static int spitz_mci_get_ro(struct device *dev) | ||
| 431 | { | ||
| 432 | return gpio_get_value(SPITZ_GPIO_nSD_WP); | ||
| 433 | } | ||
| 434 | |||
| 435 | static void spitz_mci_exit(struct device *dev, void *data) | ||
| 436 | { | ||
| 437 | free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data); | ||
| 438 | gpio_free(SPITZ_GPIO_nSD_WP); | ||
| 439 | gpio_free(SPITZ_GPIO_nSD_DETECT); | ||
| 440 | } | ||
| 441 | |||
| 442 | static struct pxamci_platform_data spitz_mci_platform_data = { | 519 | static struct pxamci_platform_data spitz_mci_platform_data = { |
| 443 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 520 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 444 | .init = spitz_mci_init, | 521 | .setpower = spitz_mci_setpower, |
| 445 | .get_ro = spitz_mci_get_ro, | 522 | .gpio_card_detect = SPITZ_GPIO_nSD_DETECT, |
| 446 | .setpower = spitz_mci_setpower, | 523 | .gpio_card_ro = SPITZ_GPIO_nSD_WP, |
| 447 | .exit = spitz_mci_exit, | 524 | .gpio_power = -1, |
| 448 | }; | 525 | }; |
| 449 | 526 | ||
| 450 | 527 | ||
| @@ -484,50 +561,10 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = { | |||
| 484 | /* | 561 | /* |
| 485 | * Irda | 562 | * Irda |
| 486 | */ | 563 | */ |
| 487 | static int spitz_irda_startup(struct device *dev) | ||
| 488 | { | ||
| 489 | int rc; | ||
| 490 | |||
| 491 | rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on"); | ||
| 492 | if (rc) | ||
| 493 | goto err; | ||
| 494 | |||
| 495 | rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1); | ||
| 496 | if (rc) | ||
| 497 | goto err_dir; | ||
| 498 | |||
| 499 | return 0; | ||
| 500 | |||
| 501 | err_dir: | ||
| 502 | gpio_free(SPITZ_GPIO_IR_ON); | ||
| 503 | err: | ||
| 504 | return rc; | ||
| 505 | } | ||
| 506 | |||
| 507 | static void spitz_irda_shutdown(struct device *dev) | ||
| 508 | { | ||
| 509 | gpio_free(SPITZ_GPIO_IR_ON); | ||
| 510 | } | ||
| 511 | |||
| 512 | static void spitz_irda_transceiver_mode(struct device *dev, int mode) | ||
| 513 | { | ||
| 514 | gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF); | ||
| 515 | pxa2xx_transceiver_mode(dev, mode); | ||
| 516 | } | ||
| 517 | |||
| 518 | #ifdef CONFIG_MACH_AKITA | ||
| 519 | static void akita_irda_transceiver_mode(struct device *dev, int mode) | ||
| 520 | { | ||
| 521 | gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF); | ||
| 522 | pxa2xx_transceiver_mode(dev, mode); | ||
| 523 | } | ||
| 524 | #endif | ||
| 525 | 564 | ||
| 526 | static struct pxaficp_platform_data spitz_ficp_platform_data = { | 565 | static struct pxaficp_platform_data spitz_ficp_platform_data = { |
| 566 | /* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */ | ||
| 527 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 567 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 528 | .transceiver_mode = spitz_irda_transceiver_mode, | ||
| 529 | .startup = spitz_irda_startup, | ||
| 530 | .shutdown = spitz_irda_shutdown, | ||
| 531 | }; | 568 | }; |
| 532 | 569 | ||
| 533 | 570 | ||
| @@ -695,6 +732,7 @@ static void __init common_init(void) | |||
| 695 | spitz_init_spi(); | 732 | spitz_init_spi(); |
| 696 | 733 | ||
| 697 | platform_add_devices(devices, ARRAY_SIZE(devices)); | 734 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
| 735 | spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 698 | pxa_set_mci_info(&spitz_mci_platform_data); | 736 | pxa_set_mci_info(&spitz_mci_platform_data); |
| 699 | pxa_set_ohci_info(&spitz_ohci_platform_data); | 737 | pxa_set_ohci_info(&spitz_ohci_platform_data); |
| 700 | pxa_set_ficp_info(&spitz_ficp_platform_data); | 738 | pxa_set_ficp_info(&spitz_ficp_platform_data); |
| @@ -705,6 +743,8 @@ static void __init common_init(void) | |||
| 705 | #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) | 743 | #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) |
| 706 | static void __init spitz_init(void) | 744 | static void __init spitz_init(void) |
| 707 | { | 745 | { |
| 746 | spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; | ||
| 747 | |||
| 708 | platform_scoop_config = &spitz_pcmcia_config; | 748 | platform_scoop_config = &spitz_pcmcia_config; |
| 709 | 749 | ||
| 710 | common_init(); | 750 | common_init(); |
| @@ -747,7 +787,7 @@ static struct nand_ecclayout akita_oobinfo = { | |||
| 747 | 787 | ||
| 748 | static void __init akita_init(void) | 788 | static void __init akita_init(void) |
| 749 | { | 789 | { |
| 750 | spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; | 790 | spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; |
| 751 | 791 | ||
| 752 | sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; | 792 | sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; |
| 753 | sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; | 793 | sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; |
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 117ad5920e53..e81a52673d49 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c | |||
| @@ -247,49 +247,10 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { | |||
| 247 | /* | 247 | /* |
| 248 | * MMC/SD Device | 248 | * MMC/SD Device |
| 249 | */ | 249 | */ |
| 250 | static struct pxamci_platform_data tosa_mci_platform_data; | ||
| 251 | |||
| 252 | static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data) | 250 | static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data) |
| 253 | { | 251 | { |
| 254 | int err; | 252 | int err; |
| 255 | 253 | ||
| 256 | tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 257 | |||
| 258 | err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect"); | ||
| 259 | if (err) { | ||
| 260 | printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n"); | ||
| 261 | goto err_gpio_detect; | ||
| 262 | } | ||
| 263 | err = gpio_direction_input(TOSA_GPIO_nSD_DETECT); | ||
| 264 | if (err) | ||
| 265 | goto err_gpio_detect_dir; | ||
| 266 | |||
| 267 | err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, | ||
| 268 | IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | ||
| 269 | "MMC/SD card detect", data); | ||
| 270 | if (err) { | ||
| 271 | printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); | ||
| 272 | goto err_irq; | ||
| 273 | } | ||
| 274 | |||
| 275 | err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect"); | ||
| 276 | if (err) { | ||
| 277 | printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); | ||
| 278 | goto err_gpio_wp; | ||
| 279 | } | ||
| 280 | err = gpio_direction_input(TOSA_GPIO_SD_WP); | ||
| 281 | if (err) | ||
| 282 | goto err_gpio_wp_dir; | ||
| 283 | |||
| 284 | err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power"); | ||
| 285 | if (err) { | ||
| 286 | printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); | ||
| 287 | goto err_gpio_pwr; | ||
| 288 | } | ||
| 289 | err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0); | ||
| 290 | if (err) | ||
| 291 | goto err_gpio_pwr_dir; | ||
| 292 | |||
| 293 | err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int"); | 254 | err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int"); |
| 294 | if (err) { | 255 | if (err) { |
| 295 | printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); | 256 | printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); |
| @@ -304,51 +265,21 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void | |||
| 304 | err_gpio_int_dir: | 265 | err_gpio_int_dir: |
| 305 | gpio_free(TOSA_GPIO_nSD_INT); | 266 | gpio_free(TOSA_GPIO_nSD_INT); |
| 306 | err_gpio_int: | 267 | err_gpio_int: |
| 307 | err_gpio_pwr_dir: | ||
| 308 | gpio_free(TOSA_GPIO_PWR_ON); | ||
| 309 | err_gpio_pwr: | ||
| 310 | err_gpio_wp_dir: | ||
| 311 | gpio_free(TOSA_GPIO_SD_WP); | ||
| 312 | err_gpio_wp: | ||
| 313 | free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); | ||
| 314 | err_irq: | ||
| 315 | err_gpio_detect_dir: | ||
| 316 | gpio_free(TOSA_GPIO_nSD_DETECT); | ||
| 317 | err_gpio_detect: | ||
| 318 | return err; | 268 | return err; |
| 319 | } | 269 | } |
| 320 | 270 | ||
| 321 | static void tosa_mci_setpower(struct device *dev, unsigned int vdd) | ||
| 322 | { | ||
| 323 | struct pxamci_platform_data* p_d = dev->platform_data; | ||
| 324 | |||
| 325 | if (( 1 << vdd) & p_d->ocr_mask) { | ||
| 326 | gpio_set_value(TOSA_GPIO_PWR_ON, 1); | ||
| 327 | } else { | ||
| 328 | gpio_set_value(TOSA_GPIO_PWR_ON, 0); | ||
| 329 | } | ||
| 330 | } | ||
| 331 | |||
| 332 | static int tosa_mci_get_ro(struct device *dev) | ||
| 333 | { | ||
| 334 | return gpio_get_value(TOSA_GPIO_SD_WP); | ||
| 335 | } | ||
| 336 | |||
| 337 | static void tosa_mci_exit(struct device *dev, void *data) | 271 | static void tosa_mci_exit(struct device *dev, void *data) |
| 338 | { | 272 | { |
| 339 | gpio_free(TOSA_GPIO_nSD_INT); | 273 | gpio_free(TOSA_GPIO_nSD_INT); |
| 340 | gpio_free(TOSA_GPIO_PWR_ON); | ||
| 341 | gpio_free(TOSA_GPIO_SD_WP); | ||
| 342 | free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); | ||
| 343 | gpio_free(TOSA_GPIO_nSD_DETECT); | ||
| 344 | } | 274 | } |
| 345 | 275 | ||
| 346 | static struct pxamci_platform_data tosa_mci_platform_data = { | 276 | static struct pxamci_platform_data tosa_mci_platform_data = { |
| 347 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 277 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 348 | .init = tosa_mci_init, | 278 | .init = tosa_mci_init, |
| 349 | .get_ro = tosa_mci_get_ro, | 279 | .exit = tosa_mci_exit, |
| 350 | .setpower = tosa_mci_setpower, | 280 | .gpio_card_detect = TOSA_GPIO_nSD_DETECT, |
| 351 | .exit = tosa_mci_exit, | 281 | .gpio_card_ro = TOSA_GPIO_SD_WP, |
| 282 | .gpio_power = TOSA_GPIO_PWR_ON, | ||
| 352 | }; | 283 | }; |
| 353 | 284 | ||
| 354 | /* | 285 | /* |
| @@ -406,10 +337,11 @@ static void tosa_irda_shutdown(struct device *dev) | |||
| 406 | } | 337 | } |
| 407 | 338 | ||
| 408 | static struct pxaficp_platform_data tosa_ficp_platform_data = { | 339 | static struct pxaficp_platform_data tosa_ficp_platform_data = { |
| 409 | .transceiver_cap = IR_SIRMODE | IR_OFF, | 340 | .gpio_pwdown = -1, |
| 410 | .transceiver_mode = tosa_irda_transceiver_mode, | 341 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 411 | .startup = tosa_irda_startup, | 342 | .transceiver_mode = tosa_irda_transceiver_mode, |
| 412 | .shutdown = tosa_irda_shutdown, | 343 | .startup = tosa_irda_startup, |
| 344 | .shutdown = tosa_irda_shutdown, | ||
| 413 | }; | 345 | }; |
| 414 | 346 | ||
| 415 | /* | 347 | /* |
| @@ -910,6 +842,7 @@ static void __init tosa_init(void) | |||
| 910 | dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); | 842 | dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); |
| 911 | dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); | 843 | dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); |
| 912 | 844 | ||
| 845 | tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); | ||
| 913 | pxa_set_mci_info(&tosa_mci_platform_data); | 846 | pxa_set_mci_info(&tosa_mci_platform_data); |
| 914 | pxa_set_udc_info(&udc_info); | 847 | pxa_set_udc_info(&udc_info); |
| 915 | pxa_set_ficp_info(&tosa_ficp_platform_data); | 848 | pxa_set_ficp_info(&tosa_ficp_platform_data); |
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c index 753ec4df17b9..fe085076fbf2 100644 --- a/arch/arm/mach-pxa/treo680.c +++ b/arch/arm/mach-pxa/treo680.c | |||
| @@ -153,87 +153,11 @@ static unsigned long treo680_pin_config[] __initdata = { | |||
| 153 | /****************************************************************************** | 153 | /****************************************************************************** |
| 154 | * SD/MMC card controller | 154 | * SD/MMC card controller |
| 155 | ******************************************************************************/ | 155 | ******************************************************************************/ |
| 156 | static int treo680_mci_init(struct device *dev, | ||
| 157 | irq_handler_t treo680_detect_int, void *data) | ||
| 158 | { | ||
| 159 | int err = 0; | ||
| 160 | |||
| 161 | /* Setup an interrupt for detecting card insert/remove events */ | ||
| 162 | err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ"); | ||
| 163 | |||
| 164 | if (err) | ||
| 165 | goto err; | ||
| 166 | |||
| 167 | err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N); | ||
| 168 | if (err) | ||
| 169 | goto err2; | ||
| 170 | |||
| 171 | err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), | ||
| 172 | treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | | ||
| 173 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
| 174 | "SD/MMC card detect", data); | ||
| 175 | |||
| 176 | if (err) { | ||
| 177 | dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n", | ||
| 178 | __func__); | ||
| 179 | goto err2; | ||
| 180 | } | ||
| 181 | |||
| 182 | err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER"); | ||
| 183 | if (err) | ||
| 184 | goto err3; | ||
| 185 | |||
| 186 | err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1); | ||
| 187 | if (err) | ||
| 188 | goto err4; | ||
| 189 | |||
| 190 | err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY"); | ||
| 191 | if (err) | ||
| 192 | goto err4; | ||
| 193 | |||
| 194 | err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY); | ||
| 195 | if (err) | ||
| 196 | goto err5; | ||
| 197 | |||
| 198 | return 0; | ||
| 199 | |||
| 200 | err5: | ||
| 201 | gpio_free(GPIO_NR_TREO680_SD_READONLY); | ||
| 202 | err4: | ||
| 203 | gpio_free(GPIO_NR_TREO680_SD_POWER); | ||
| 204 | err3: | ||
| 205 | free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data); | ||
| 206 | err2: | ||
| 207 | gpio_free(GPIO_NR_TREO680_SD_DETECT_N); | ||
| 208 | err: | ||
| 209 | return err; | ||
| 210 | } | ||
| 211 | |||
| 212 | static void treo680_mci_exit(struct device *dev, void *data) | ||
| 213 | { | ||
| 214 | gpio_free(GPIO_NR_TREO680_SD_READONLY); | ||
| 215 | gpio_free(GPIO_NR_TREO680_SD_POWER); | ||
| 216 | free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data); | ||
| 217 | gpio_free(GPIO_NR_TREO680_SD_DETECT_N); | ||
| 218 | } | ||
| 219 | |||
| 220 | static void treo680_mci_power(struct device *dev, unsigned int vdd) | ||
| 221 | { | ||
| 222 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
| 223 | gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd)); | ||
| 224 | } | ||
| 225 | |||
| 226 | static int treo680_mci_get_ro(struct device *dev) | ||
| 227 | { | ||
| 228 | return gpio_get_value(GPIO_NR_TREO680_SD_READONLY); | ||
| 229 | } | ||
| 230 | |||
| 231 | static struct pxamci_platform_data treo680_mci_platform_data = { | 156 | static struct pxamci_platform_data treo680_mci_platform_data = { |
| 232 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | 157 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| 233 | .setpower = treo680_mci_power, | 158 | .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N, |
| 234 | .get_ro = treo680_mci_get_ro, | 159 | .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY, |
| 235 | .init = treo680_mci_init, | 160 | .gpio_power = GPIO_NR_TREO680_SD_POWER, |
| 236 | .exit = treo680_mci_exit, | ||
| 237 | }; | 161 | }; |
| 238 | 162 | ||
| 239 | /****************************************************************************** | 163 | /****************************************************************************** |
| @@ -330,16 +254,9 @@ static int treo680_backlight_init(struct device *dev) | |||
| 330 | ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0); | 254 | ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0); |
| 331 | if (ret) | 255 | if (ret) |
| 332 | goto err2; | 256 | goto err2; |
| 333 | ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER"); | ||
| 334 | if (ret) | ||
| 335 | goto err2; | ||
| 336 | ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0); | ||
| 337 | if (ret) | ||
| 338 | goto err3; | ||
| 339 | 257 | ||
| 340 | return 0; | 258 | return 0; |
| 341 | err3: | 259 | |
| 342 | gpio_free(GPIO_NR_TREO680_LCD_POWER); | ||
| 343 | err2: | 260 | err2: |
| 344 | gpio_free(GPIO_NR_TREO680_BL_POWER); | 261 | gpio_free(GPIO_NR_TREO680_BL_POWER); |
| 345 | err: | 262 | err: |
| @@ -355,7 +272,6 @@ static int treo680_backlight_notify(int brightness) | |||
| 355 | static void treo680_backlight_exit(struct device *dev) | 272 | static void treo680_backlight_exit(struct device *dev) |
| 356 | { | 273 | { |
| 357 | gpio_free(GPIO_NR_TREO680_BL_POWER); | 274 | gpio_free(GPIO_NR_TREO680_BL_POWER); |
| 358 | gpio_free(GPIO_NR_TREO680_LCD_POWER); | ||
| 359 | } | 275 | } |
| 360 | 276 | ||
| 361 | static struct platform_pwm_backlight_data treo680_backlight_data = { | 277 | static struct platform_pwm_backlight_data treo680_backlight_data = { |
| @@ -379,44 +295,9 @@ static struct platform_device treo680_backlight = { | |||
| 379 | /****************************************************************************** | 295 | /****************************************************************************** |
| 380 | * IrDA | 296 | * IrDA |
| 381 | ******************************************************************************/ | 297 | ******************************************************************************/ |
| 382 | static void treo680_transceiver_mode(struct device *dev, int mode) | ||
| 383 | { | ||
| 384 | gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF); | ||
| 385 | pxa2xx_transceiver_mode(dev, mode); | ||
| 386 | } | ||
| 387 | |||
| 388 | static int treo680_irda_startup(struct device *dev) | ||
| 389 | { | ||
| 390 | int err; | ||
| 391 | |||
| 392 | err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable"); | ||
| 393 | if (err) | ||
| 394 | goto err1; | ||
| 395 | |||
| 396 | err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1); | ||
| 397 | if (err) | ||
| 398 | goto err2; | ||
| 399 | |||
| 400 | return 0; | ||
| 401 | |||
| 402 | err2: | ||
| 403 | dev_err(dev, "treo680_irda: cannot change IR gpio direction\n"); | ||
| 404 | gpio_free(GPIO_NR_TREO680_IR_EN); | ||
| 405 | err1: | ||
| 406 | dev_err(dev, "treo680_irda: cannot allocate IR gpio\n"); | ||
| 407 | return err; | ||
| 408 | } | ||
| 409 | |||
| 410 | static void treo680_irda_shutdown(struct device *dev) | ||
| 411 | { | ||
| 412 | gpio_free(GPIO_NR_TREO680_IR_EN); | ||
| 413 | } | ||
| 414 | |||
| 415 | static struct pxaficp_platform_data treo680_ficp_info = { | 298 | static struct pxaficp_platform_data treo680_ficp_info = { |
| 416 | .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF, | 299 | .gpio_pwdown = GPIO_NR_TREO680_IR_EN, |
| 417 | .startup = treo680_irda_startup, | 300 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
| 418 | .shutdown = treo680_irda_shutdown, | ||
| 419 | .transceiver_mode = treo680_transceiver_mode, | ||
| 420 | }; | 301 | }; |
| 421 | 302 | ||
| 422 | /****************************************************************************** | 303 | /****************************************************************************** |
| @@ -546,6 +427,11 @@ static struct pxafb_mode_info treo680_lcd_modes[] = { | |||
| 546 | }, | 427 | }, |
| 547 | }; | 428 | }; |
| 548 | 429 | ||
| 430 | static void treo680_lcd_power(int on, struct fb_var_screeninfo *info) | ||
| 431 | { | ||
| 432 | gpio_set_value(GPIO_NR_TREO680_BL_POWER, on); | ||
| 433 | } | ||
| 434 | |||
| 549 | static struct pxafb_mach_info treo680_lcd_screen = { | 435 | static struct pxafb_mach_info treo680_lcd_screen = { |
| 550 | .modes = treo680_lcd_modes, | 436 | .modes = treo680_lcd_modes, |
| 551 | .num_modes = ARRAY_SIZE(treo680_lcd_modes), | 437 | .num_modes = ARRAY_SIZE(treo680_lcd_modes), |
| @@ -585,11 +471,32 @@ static void __init treo680_udc_init(void) | |||
| 585 | } | 471 | } |
| 586 | } | 472 | } |
| 587 | 473 | ||
| 474 | static void __init treo680_lcd_power_init(void) | ||
| 475 | { | ||
| 476 | int ret; | ||
| 477 | |||
| 478 | ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER"); | ||
| 479 | if (ret) { | ||
| 480 | pr_err("Treo680: LCD power GPIO request failed!\n"); | ||
| 481 | return; | ||
| 482 | } | ||
| 483 | |||
| 484 | ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0); | ||
| 485 | if (ret) { | ||
| 486 | pr_err("Treo680: setting LCD power GPIO direction failed!\n"); | ||
| 487 | gpio_free(GPIO_NR_TREO680_LCD_POWER); | ||
| 488 | return; | ||
| 489 | } | ||
| 490 | |||
| 491 | treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power; | ||
| 492 | } | ||
| 493 | |||
| 588 | static void __init treo680_init(void) | 494 | static void __init treo680_init(void) |
| 589 | { | 495 | { |
| 590 | treo680_pm_init(); | 496 | treo680_pm_init(); |
| 591 | pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); | 497 | pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); |
| 592 | pxa_set_keypad_info(&treo680_keypad_platform_data); | 498 | pxa_set_keypad_info(&treo680_keypad_platform_data); |
| 499 | treo680_lcd_power_init(); | ||
| 593 | set_pxa_fb_info(&treo680_lcd_screen); | 500 | set_pxa_fb_info(&treo680_lcd_screen); |
| 594 | pxa_set_mci_info(&treo680_mci_platform_data); | 501 | pxa_set_mci_info(&treo680_mci_platform_data); |
| 595 | treo680_udc_init(); | 502 | treo680_udc_init(); |
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 825f540176d2..3981e0356d12 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c | |||
| @@ -367,6 +367,9 @@ static struct pxamci_platform_data trizeps4_mci_platform_data = { | |||
| 367 | .exit = trizeps4_mci_exit, | 367 | .exit = trizeps4_mci_exit, |
| 368 | .get_ro = NULL, /* write-protection not supported */ | 368 | .get_ro = NULL, /* write-protection not supported */ |
| 369 | .setpower = NULL, /* power-switching not supported */ | 369 | .setpower = NULL, /* power-switching not supported */ |
| 370 | .gpio_card_detect = -1, | ||
| 371 | .gpio_card_ro = -1, | ||
| 372 | .gpio_power = -1, | ||
| 370 | }; | 373 | }; |
| 371 | 374 | ||
| 372 | /**************************************************************************** | 375 | /**************************************************************************** |
| @@ -412,6 +415,7 @@ static void trizeps4_irda_transceiver_mode(struct device *dev, int mode) | |||
| 412 | } | 415 | } |
| 413 | 416 | ||
| 414 | static struct pxaficp_platform_data trizeps4_ficp_platform_data = { | 417 | static struct pxaficp_platform_data trizeps4_ficp_platform_data = { |
| 418 | .gpio_pwdown = -1, | ||
| 415 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, | 419 | .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, |
| 416 | .transceiver_mode = trizeps4_irda_transceiver_mode, | 420 | .transceiver_mode = trizeps4_irda_transceiver_mode, |
| 417 | .startup = trizeps4_irda_startup, | 421 | .startup = trizeps4_irda_startup, |
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c new file mode 100644 index 000000000000..3fd79cbb36c8 --- /dev/null +++ b/arch/arm/mach-pxa/xcep.c | |||
| @@ -0,0 +1,187 @@ | |||
| 1 | /* linux/arch/arm/mach-pxa/xcep.c | ||
| 2 | * | ||
| 3 | * Support for the Iskratel Electronics XCEP platform as used in | ||
| 4 | * the Libera instruments from Instrumentation Technologies. | ||
| 5 | * | ||
| 6 | * Author: Ales Bardorfer <ales@i-tech.si> | ||
| 7 | * Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk> | ||
| 8 | * Contributions by: Matej Kenda <matej.kenda@i-tech.si> | ||
| 9 | * Created: June 2006 | ||
| 10 | * Copyright: (C) 2006-2009 Instrumentation Technologies | ||
| 11 | * | ||
| 12 | * This program is free software; you can redistribute it and/or modify | ||
| 13 | * it under the terms of the GNU General Public License version 2 as | ||
| 14 | * published by the Free Software Foundation. | ||
| 15 | */ | ||
| 16 | |||
| 17 | #include <linux/platform_device.h> | ||
| 18 | #include <linux/i2c.h> | ||
| 19 | #include <linux/smc91x.h> | ||
| 20 | #include <linux/mtd/mtd.h> | ||
| 21 | #include <linux/mtd/partitions.h> | ||
| 22 | #include <linux/mtd/physmap.h> | ||
| 23 | |||
| 24 | #include <asm/mach-types.h> | ||
| 25 | #include <asm/mach/arch.h> | ||
| 26 | #include <asm/mach/irq.h> | ||
| 27 | #include <asm/mach/map.h> | ||
| 28 | |||
| 29 | #include <plat/i2c.h> | ||
| 30 | |||
| 31 | #include <mach/hardware.h> | ||
| 32 | #include <mach/pxa2xx-regs.h> | ||
| 33 | #include <mach/mfp-pxa25x.h> | ||
| 34 | |||
| 35 | #include "generic.h" | ||
| 36 | |||
| 37 | #define XCEP_ETH_PHYS (PXA_CS3_PHYS + 0x00000300) | ||
| 38 | #define XCEP_ETH_PHYS_END (PXA_CS3_PHYS + 0x000fffff) | ||
| 39 | #define XCEP_ETH_ATTR (PXA_CS3_PHYS + 0x02000000) | ||
| 40 | #define XCEP_ETH_ATTR_END (PXA_CS3_PHYS + 0x020fffff) | ||
| 41 | #define XCEP_ETH_IRQ IRQ_GPIO0 | ||
| 42 | |||
| 43 | /* XCEP CPLD base */ | ||
| 44 | #define XCEP_CPLD_BASE 0xf0000000 | ||
| 45 | |||
| 46 | |||
| 47 | /* Flash partitions. */ | ||
| 48 | |||
| 49 | static struct mtd_partition xcep_partitions[] = { | ||
| 50 | { | ||
| 51 | .name = "Bootloader", | ||
| 52 | .size = 0x00040000, | ||
| 53 | .offset = 0, | ||
| 54 | .mask_flags = MTD_WRITEABLE | ||
| 55 | }, { | ||
| 56 | .name = "Bootloader ENV", | ||
| 57 | .size = 0x00040000, | ||
| 58 | .offset = 0x00040000, | ||
| 59 | .mask_flags = MTD_WRITEABLE | ||
| 60 | }, { | ||
| 61 | .name = "Kernel", | ||
| 62 | .size = 0x00100000, | ||
| 63 | .offset = 0x00080000, | ||
| 64 | }, { | ||
| 65 | .name = "Rescue fs", | ||
| 66 | .size = 0x00280000, | ||
| 67 | .offset = 0x00180000, | ||
| 68 | }, { | ||
| 69 | .name = "Filesystem", | ||
| 70 | .size = MTDPART_SIZ_FULL, | ||
| 71 | .offset = 0x00400000 | ||
| 72 | } | ||
| 73 | }; | ||
| 74 | |||
| 75 | static struct physmap_flash_data xcep_flash_data[] = { | ||
| 76 | { | ||
| 77 | .width = 4, /* bankwidth in bytes */ | ||
| 78 | .parts = xcep_partitions, | ||
| 79 | .nr_parts = ARRAY_SIZE(xcep_partitions) | ||
| 80 | } | ||
| 81 | }; | ||
| 82 | |||
| 83 | static struct resource flash_resource = { | ||
| 84 | .start = PXA_CS0_PHYS, | ||
| 85 | .end = PXA_CS0_PHYS + SZ_32M - 1, | ||
| 86 | .flags = IORESOURCE_MEM, | ||
| 87 | }; | ||
| 88 | |||
| 89 | static struct platform_device flash_device = { | ||
| 90 | .name = "physmap-flash", | ||
| 91 | .id = 0, | ||
| 92 | .dev = { | ||
| 93 | .platform_data = xcep_flash_data, | ||
| 94 | }, | ||
| 95 | .resource = &flash_resource, | ||
| 96 | .num_resources = 1, | ||
| 97 | }; | ||
| 98 | |||
| 99 | |||
| 100 | |||
| 101 | /* SMC LAN91C111 network controller. */ | ||
| 102 | |||
| 103 | static struct resource smc91x_resources[] = { | ||
| 104 | [0] = { | ||
| 105 | .name = "smc91x-regs", | ||
| 106 | .start = XCEP_ETH_PHYS, | ||
| 107 | .end = XCEP_ETH_PHYS_END, | ||
| 108 | .flags = IORESOURCE_MEM, | ||
| 109 | }, | ||
| 110 | [1] = { | ||
| 111 | .start = XCEP_ETH_IRQ, | ||
| 112 | .end = XCEP_ETH_IRQ, | ||
| 113 | .flags = IORESOURCE_IRQ, | ||
| 114 | }, | ||
| 115 | [2] = { | ||
| 116 | .name = "smc91x-attrib", | ||
| 117 | .start = XCEP_ETH_ATTR, | ||
| 118 | .end = XCEP_ETH_ATTR_END, | ||
| 119 | .flags = IORESOURCE_MEM, | ||
| 120 | }, | ||
| 121 | }; | ||
| 122 | |||
| 123 | static struct smc91x_platdata xcep_smc91x_info = { | ||
| 124 | .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, | ||
| 125 | }; | ||
| 126 | |||
| 127 | static struct platform_device smc91x_device = { | ||
| 128 | .name = "smc91x", | ||
| 129 | .id = -1, | ||
| 130 | .num_resources = ARRAY_SIZE(smc91x_resources), | ||
| 131 | .resource = smc91x_resources, | ||
| 132 | .dev = { | ||
| 133 | .platform_data = &xcep_smc91x_info, | ||
| 134 | }, | ||
| 135 | }; | ||
| 136 | |||
| 137 | |||
| 138 | static struct platform_device *devices[] __initdata = { | ||
| 139 | &flash_device, | ||
| 140 | &smc91x_device, | ||
| 141 | }; | ||
| 142 | |||
| 143 | |||
| 144 | /* We have to state that there are HWMON devices on the I2C bus on XCEP. | ||
| 145 | * Drivers for HWMON verify capabilities of the adapter when loading and | ||
| 146 | * refuse to attach if the adapter doesn't support HWMON class of devices. | ||
| 147 | * See also Documentation/i2c/porting-clients. */ | ||
| 148 | static struct i2c_pxa_platform_data xcep_i2c_platform_data = { | ||
| 149 | .class = I2C_CLASS_HWMON | ||
| 150 | }; | ||
| 151 | |||
| 152 | |||
| 153 | static mfp_cfg_t xcep_pin_config[] __initdata = { | ||
| 154 | GPIO79_nCS_3, /* SMC 91C111 chip select. */ | ||
| 155 | GPIO80_nCS_4, /* CPLD chip select. */ | ||
| 156 | /* SSP communication to MSP430 */ | ||
| 157 | GPIO23_SSP1_SCLK, | ||
| 158 | GPIO24_SSP1_SFRM, | ||
| 159 | GPIO25_SSP1_TXD, | ||
| 160 | GPIO26_SSP1_RXD, | ||
| 161 | GPIO27_SSP1_EXTCLK | ||
| 162 | }; | ||
| 163 | |||
| 164 | static void __init xcep_init(void) | ||
| 165 | { | ||
| 166 | pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config)); | ||
| 167 | |||
| 168 | /* See Intel XScale Developer's Guide for details */ | ||
| 169 | /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */ | ||
| 170 | MSC1 = (MSC1 & 0xffff) | 0xD5540000; | ||
| 171 | /* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */ | ||
| 172 | MSC2 = (MSC2 & 0xffff) | 0x72A00000; | ||
| 173 | |||
| 174 | platform_add_devices(ARRAY_AND_SIZE(devices)); | ||
| 175 | pxa_set_i2c_info(&xcep_i2c_platform_data); | ||
| 176 | } | ||
| 177 | |||
| 178 | MACHINE_START(XCEP, "Iskratel XCEP") | ||
| 179 | .phys_io = 0x40000000, | ||
| 180 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | ||
| 181 | .boot_params = 0xa0000100, | ||
| 182 | .init_machine = xcep_init, | ||
| 183 | .map_io = pxa_map_io, | ||
| 184 | .init_irq = pxa25x_init_irq, | ||
| 185 | .timer = &pxa_timer, | ||
| 186 | MACHINE_END | ||
| 187 | |||
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 218d2001f1df..09784d3954e4 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c | |||
| @@ -290,6 +290,9 @@ static struct pxamci_platform_data zylonite_mci_platform_data = { | |||
| 290 | .init = zylonite_mci_init, | 290 | .init = zylonite_mci_init, |
| 291 | .exit = zylonite_mci_exit, | 291 | .exit = zylonite_mci_exit, |
| 292 | .get_ro = zylonite_mci_ro, | 292 | .get_ro = zylonite_mci_ro, |
| 293 | .gpio_card_detect = -1, | ||
| 294 | .gpio_card_ro = -1, | ||
| 295 | .gpio_power = -1, | ||
| 293 | }; | 296 | }; |
| 294 | 297 | ||
| 295 | static struct pxamci_platform_data zylonite_mci2_platform_data = { | 298 | static struct pxamci_platform_data zylonite_mci2_platform_data = { |
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index dc3519c50ab2..a2083b60e3fb 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c | |||
| @@ -30,6 +30,7 @@ | |||
| 30 | #include <linux/io.h> | 30 | #include <linux/io.h> |
| 31 | #include <linux/smsc911x.h> | 31 | #include <linux/smsc911x.h> |
| 32 | #include <linux/ata_platform.h> | 32 | #include <linux/ata_platform.h> |
| 33 | #include <linux/amba/mmci.h> | ||
| 33 | 34 | ||
| 34 | #include <asm/clkdev.h> | 35 | #include <asm/clkdev.h> |
| 35 | #include <asm/system.h> | 36 | #include <asm/system.h> |
| @@ -44,7 +45,6 @@ | |||
| 44 | #include <asm/mach/flash.h> | 45 | #include <asm/mach/flash.h> |
| 45 | #include <asm/mach/irq.h> | 46 | #include <asm/mach/irq.h> |
| 46 | #include <asm/mach/map.h> | 47 | #include <asm/mach/map.h> |
| 47 | #include <asm/mach/mmc.h> | ||
| 48 | 48 | ||
| 49 | #include <asm/hardware/gic.h> | 49 | #include <asm/hardware/gic.h> |
| 50 | 50 | ||
| @@ -237,14 +237,14 @@ static unsigned int realview_mmc_status(struct device *dev) | |||
| 237 | return readl(REALVIEW_SYSMCI) & mask; | 237 | return readl(REALVIEW_SYSMCI) & mask; |
| 238 | } | 238 | } |
| 239 | 239 | ||
| 240 | struct mmc_platform_data realview_mmc0_plat_data = { | 240 | struct mmci_platform_data realview_mmc0_plat_data = { |
| 241 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 241 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 242 | .status = realview_mmc_status, | 242 | .status = realview_mmc_status, |
| 243 | .gpio_wp = 17, | 243 | .gpio_wp = 17, |
| 244 | .gpio_cd = 16, | 244 | .gpio_cd = 16, |
| 245 | }; | 245 | }; |
| 246 | 246 | ||
| 247 | struct mmc_platform_data realview_mmc1_plat_data = { | 247 | struct mmci_platform_data realview_mmc1_plat_data = { |
| 248 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 248 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 249 | .status = realview_mmc_status, | 249 | .status = realview_mmc_status, |
| 250 | .gpio_wp = 19, | 250 | .gpio_wp = 19, |
| @@ -296,31 +296,31 @@ static struct clk ref24_clk = { | |||
| 296 | 296 | ||
| 297 | static struct clk_lookup lookups[] = { | 297 | static struct clk_lookup lookups[] = { |
| 298 | { /* UART0 */ | 298 | { /* UART0 */ |
| 299 | .dev_id = "dev:f1", | 299 | .dev_id = "dev:uart0", |
| 300 | .clk = &ref24_clk, | 300 | .clk = &ref24_clk, |
| 301 | }, { /* UART1 */ | 301 | }, { /* UART1 */ |
| 302 | .dev_id = "dev:f2", | 302 | .dev_id = "dev:uart1", |
| 303 | .clk = &ref24_clk, | 303 | .clk = &ref24_clk, |
| 304 | }, { /* UART2 */ | 304 | }, { /* UART2 */ |
| 305 | .dev_id = "dev:f3", | 305 | .dev_id = "dev:uart2", |
| 306 | .clk = &ref24_clk, | 306 | .clk = &ref24_clk, |
| 307 | }, { /* UART3 */ | 307 | }, { /* UART3 */ |
| 308 | .dev_id = "fpga:09", | 308 | .dev_id = "fpga:uart3", |
| 309 | .clk = &ref24_clk, | 309 | .clk = &ref24_clk, |
| 310 | }, { /* KMI0 */ | 310 | }, { /* KMI0 */ |
| 311 | .dev_id = "fpga:06", | 311 | .dev_id = "fpga:kmi0", |
| 312 | .clk = &ref24_clk, | 312 | .clk = &ref24_clk, |
| 313 | }, { /* KMI1 */ | 313 | }, { /* KMI1 */ |
| 314 | .dev_id = "fpga:07", | 314 | .dev_id = "fpga:kmi1", |
| 315 | .clk = &ref24_clk, | 315 | .clk = &ref24_clk, |
| 316 | }, { /* MMC0 */ | 316 | }, { /* MMC0 */ |
| 317 | .dev_id = "fpga:05", | 317 | .dev_id = "fpga:mmc0", |
| 318 | .clk = &ref24_clk, | 318 | .clk = &ref24_clk, |
| 319 | }, { /* EB:CLCD */ | 319 | }, { /* EB:CLCD */ |
| 320 | .dev_id = "dev:20", | 320 | .dev_id = "dev:clcd", |
| 321 | .clk = &oscvco_clk, | 321 | .clk = &oscvco_clk, |
| 322 | }, { /* PB:CLCD */ | 322 | }, { /* PB:CLCD */ |
| 323 | .dev_id = "issp:20", | 323 | .dev_id = "issp:clcd", |
| 324 | .clk = &oscvco_clk, | 324 | .clk = &oscvco_clk, |
| 325 | } | 325 | } |
| 326 | }; | 326 | }; |
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 59a337ba4be7..46cd6acb4d40 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h | |||
| @@ -47,8 +47,8 @@ static struct amba_device name##_device = { \ | |||
| 47 | extern struct platform_device realview_flash_device; | 47 | extern struct platform_device realview_flash_device; |
| 48 | extern struct platform_device realview_cf_device; | 48 | extern struct platform_device realview_cf_device; |
| 49 | extern struct platform_device realview_i2c_device; | 49 | extern struct platform_device realview_i2c_device; |
| 50 | extern struct mmc_platform_data realview_mmc0_plat_data; | 50 | extern struct mmci_platform_data realview_mmc0_plat_data; |
| 51 | extern struct mmc_platform_data realview_mmc1_plat_data; | 51 | extern struct mmci_platform_data realview_mmc1_plat_data; |
| 52 | extern struct clcd_board clcd_plat_data; | 52 | extern struct clcd_board clcd_plat_data; |
| 53 | extern void __iomem *gic_cpu_base_addr; | 53 | extern void __iomem *gic_cpu_base_addr; |
| 54 | extern void __iomem *timer0_va_base; | 54 | extern void __iomem *timer0_va_base; |
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index abd13b448671..1d65e64ae571 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c | |||
| @@ -24,6 +24,7 @@ | |||
| 24 | #include <linux/sysdev.h> | 24 | #include <linux/sysdev.h> |
| 25 | #include <linux/amba/bus.h> | 25 | #include <linux/amba/bus.h> |
| 26 | #include <linux/amba/pl061.h> | 26 | #include <linux/amba/pl061.h> |
| 27 | #include <linux/amba/mmci.h> | ||
| 27 | #include <linux/io.h> | 28 | #include <linux/io.h> |
| 28 | 29 | ||
| 29 | #include <mach/hardware.h> | 30 | #include <mach/hardware.h> |
| @@ -37,7 +38,6 @@ | |||
| 37 | 38 | ||
| 38 | #include <asm/mach/arch.h> | 39 | #include <asm/mach/arch.h> |
| 39 | #include <asm/mach/map.h> | 40 | #include <asm/mach/map.h> |
| 40 | #include <asm/mach/mmc.h> | ||
| 41 | #include <asm/mach/time.h> | 41 | #include <asm/mach/time.h> |
| 42 | 42 | ||
| 43 | #include <mach/board-eb.h> | 43 | #include <mach/board-eb.h> |
| @@ -193,27 +193,27 @@ static struct pl061_platform_data gpio2_plat_data = { | |||
| 193 | #define EB_SSP_DMA { 9, 8 } | 193 | #define EB_SSP_DMA { 9, 8 } |
| 194 | 194 | ||
| 195 | /* FPGA Primecells */ | 195 | /* FPGA Primecells */ |
| 196 | AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); | 196 | AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| 197 | AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); | 197 | AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| 198 | AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); | 198 | AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| 199 | AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); | 199 | AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| 200 | AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL); | 200 | AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); |
| 201 | 201 | ||
| 202 | /* DevChip Primecells */ | 202 | /* DevChip Primecells */ |
| 203 | AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL); | 203 | AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL); |
| 204 | AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data); | 204 | AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); |
| 205 | AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); | 205 | AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL); |
| 206 | AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); | 206 | AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| 207 | AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL); | 207 | AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); |
| 208 | AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data); | 208 | AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); |
| 209 | AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); | 209 | AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| 210 | AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); | 210 | AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| 211 | AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL); | 211 | AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); |
| 212 | AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); | 212 | AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| 213 | AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL); | 213 | AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); |
| 214 | AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL); | 214 | AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); |
| 215 | AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL); | 215 | AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); |
| 216 | AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL); | 216 | AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, NULL); |
| 217 | 217 | ||
| 218 | static struct amba_device *amba_devs[] __initdata = { | 218 | static struct amba_device *amba_devs[] __initdata = { |
| 219 | &dmac_device, | 219 | &dmac_device, |
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 17fbb0e889b6..2817fe099319 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c | |||
| @@ -24,6 +24,7 @@ | |||
| 24 | #include <linux/sysdev.h> | 24 | #include <linux/sysdev.h> |
| 25 | #include <linux/amba/bus.h> | 25 | #include <linux/amba/bus.h> |
| 26 | #include <linux/amba/pl061.h> | 26 | #include <linux/amba/pl061.h> |
| 27 | #include <linux/amba/mmci.h> | ||
| 27 | #include <linux/io.h> | 28 | #include <linux/io.h> |
| 28 | 29 | ||
| 29 | #include <mach/hardware.h> | 30 | #include <mach/hardware.h> |
| @@ -37,7 +38,6 @@ | |||
| 37 | #include <asm/mach/arch.h> | 38 | #include <asm/mach/arch.h> |
| 38 | #include <asm/mach/flash.h> | 39 | #include <asm/mach/flash.h> |
| 39 | #include <asm/mach/map.h> | 40 | #include <asm/mach/map.h> |
| 40 | #include <asm/mach/mmc.h> | ||
| 41 | #include <asm/mach/time.h> | 41 | #include <asm/mach/time.h> |
| 42 | 42 | ||
| 43 | #include <mach/board-pb1176.h> | 43 | #include <mach/board-pb1176.h> |
| @@ -170,29 +170,29 @@ static struct pl061_platform_data gpio2_plat_data = { | |||
| 170 | #define PB1176_SSP_DMA { 9, 8 } | 170 | #define PB1176_SSP_DMA { 9, 8 } |
| 171 | 171 | ||
| 172 | /* FPGA Primecells */ | 172 | /* FPGA Primecells */ |
| 173 | AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); | 173 | AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| 174 | AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); | 174 | AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| 175 | AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); | 175 | AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| 176 | AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); | 176 | AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| 177 | AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL); | 177 | AMBA_DEVICE(uart3, "fpga:uart3", PB1176_UART3, NULL); |
| 178 | 178 | ||
| 179 | /* DevChip Primecells */ | 179 | /* DevChip Primecells */ |
| 180 | AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL); | 180 | AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); |
| 181 | AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); | 181 | AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| 182 | AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL); | 182 | AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); |
| 183 | AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data); | 183 | AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); |
| 184 | AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); | 184 | AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| 185 | AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); | 185 | AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| 186 | AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL); | 186 | AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); |
| 187 | AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); | 187 | AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| 188 | AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL); | 188 | AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); |
| 189 | AMBA_DEVICE(uart1, "dev:f2", PB1176_UART1, NULL); | 189 | AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); |
| 190 | AMBA_DEVICE(uart2, "dev:f3", PB1176_UART2, NULL); | 190 | AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); |
| 191 | AMBA_DEVICE(ssp0, "dev:f4", PB1176_SSP, NULL); | 191 | AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, NULL); |
| 192 | 192 | ||
| 193 | /* Primecells on the NEC ISSP chip */ | 193 | /* Primecells on the NEC ISSP chip */ |
| 194 | AMBA_DEVICE(clcd, "issp:20", PB1176_CLCD, &clcd_plat_data); | 194 | AMBA_DEVICE(clcd, "issp:clcd", PB1176_CLCD, &clcd_plat_data); |
| 195 | //AMBA_DEVICE(dmac, "issp:30", PB1176_DMAC, NULL); | 195 | //AMBA_DEVICE(dmac, "issp:dmac", PB1176_DMAC, NULL); |
| 196 | 196 | ||
| 197 | static struct amba_device *amba_devs[] __initdata = { | 197 | static struct amba_device *amba_devs[] __initdata = { |
| 198 | // &dmac_device, | 198 | // &dmac_device, |
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index fdd042b85f40..94680fcf726d 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c | |||
| @@ -24,6 +24,7 @@ | |||
| 24 | #include <linux/sysdev.h> | 24 | #include <linux/sysdev.h> |
| 25 | #include <linux/amba/bus.h> | 25 | #include <linux/amba/bus.h> |
| 26 | #include <linux/amba/pl061.h> | 26 | #include <linux/amba/pl061.h> |
| 27 | #include <linux/amba/mmci.h> | ||
| 27 | #include <linux/io.h> | 28 | #include <linux/io.h> |
| 28 | 29 | ||
| 29 | #include <mach/hardware.h> | 30 | #include <mach/hardware.h> |
| @@ -38,7 +39,6 @@ | |||
| 38 | #include <asm/mach/arch.h> | 39 | #include <asm/mach/arch.h> |
| 39 | #include <asm/mach/flash.h> | 40 | #include <asm/mach/flash.h> |
| 40 | #include <asm/mach/map.h> | 41 | #include <asm/mach/map.h> |
| 41 | #include <asm/mach/mmc.h> | ||
| 42 | #include <asm/mach/time.h> | 42 | #include <asm/mach/time.h> |
| 43 | 43 | ||
| 44 | #include <mach/board-pb11mp.h> | 44 | #include <mach/board-pb11mp.h> |
| @@ -172,29 +172,29 @@ static struct pl061_platform_data gpio2_plat_data = { | |||
| 172 | #define PB11MP_SSP_DMA { 9, 8 } | 172 | #define PB11MP_SSP_DMA { 9, 8 } |
| 173 | 173 | ||
| 174 | /* FPGA Primecells */ | 174 | /* FPGA Primecells */ |
| 175 | AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); | 175 | AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| 176 | AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); | 176 | AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| 177 | AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); | 177 | AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| 178 | AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); | 178 | AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| 179 | AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL); | 179 | AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); |
| 180 | 180 | ||
| 181 | /* DevChip Primecells */ | 181 | /* DevChip Primecells */ |
| 182 | AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL); | 182 | AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); |
| 183 | AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); | 183 | AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| 184 | AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL); | 184 | AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); |
| 185 | AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data); | 185 | AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); |
| 186 | AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); | 186 | AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| 187 | AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); | 187 | AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| 188 | AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL); | 188 | AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); |
| 189 | AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); | 189 | AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| 190 | AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL); | 190 | AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); |
| 191 | AMBA_DEVICE(uart1, "dev:f2", PB11MP_UART1, NULL); | 191 | AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); |
| 192 | AMBA_DEVICE(uart2, "dev:f3", PB11MP_UART2, NULL); | 192 | AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); |
| 193 | AMBA_DEVICE(ssp0, "dev:f4", PB11MP_SSP, NULL); | 193 | AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL); |
| 194 | 194 | ||
| 195 | /* Primecells on the NEC ISSP chip */ | 195 | /* Primecells on the NEC ISSP chip */ |
| 196 | AMBA_DEVICE(clcd, "issp:20", PB11MP_CLCD, &clcd_plat_data); | 196 | AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); |
| 197 | AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); | 197 | AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); |
| 198 | 198 | ||
| 199 | static struct amba_device *amba_devs[] __initdata = { | 199 | static struct amba_device *amba_devs[] __initdata = { |
| 200 | &dmac_device, | 200 | &dmac_device, |
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 70bba9900d97..941beb2b9709 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c | |||
| @@ -24,6 +24,7 @@ | |||
| 24 | #include <linux/sysdev.h> | 24 | #include <linux/sysdev.h> |
| 25 | #include <linux/amba/bus.h> | 25 | #include <linux/amba/bus.h> |
| 26 | #include <linux/amba/pl061.h> | 26 | #include <linux/amba/pl061.h> |
| 27 | #include <linux/amba/mmci.h> | ||
| 27 | #include <linux/io.h> | 28 | #include <linux/io.h> |
| 28 | 29 | ||
| 29 | #include <asm/irq.h> | 30 | #include <asm/irq.h> |
| @@ -34,7 +35,6 @@ | |||
| 34 | 35 | ||
| 35 | #include <asm/mach/arch.h> | 36 | #include <asm/mach/arch.h> |
| 36 | #include <asm/mach/map.h> | 37 | #include <asm/mach/map.h> |
| 37 | #include <asm/mach/mmc.h> | ||
| 38 | #include <asm/mach/time.h> | 38 | #include <asm/mach/time.h> |
| 39 | 39 | ||
| 40 | #include <mach/hardware.h> | 40 | #include <mach/hardware.h> |
| @@ -162,29 +162,29 @@ static struct pl061_platform_data gpio2_plat_data = { | |||
| 162 | #define PBA8_SSP_DMA { 9, 8 } | 162 | #define PBA8_SSP_DMA { 9, 8 } |
| 163 | 163 | ||
| 164 | /* FPGA Primecells */ | 164 | /* FPGA Primecells */ |
| 165 | AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); | 165 | AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| 166 | AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); | 166 | AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| 167 | AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); | 167 | AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| 168 | AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); | 168 | AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| 169 | AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL); | 169 | AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); |
| 170 | 170 | ||
| 171 | /* DevChip Primecells */ | 171 | /* DevChip Primecells */ |
| 172 | AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL); | 172 | AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); |
| 173 | AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); | 173 | AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| 174 | AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL); | 174 | AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); |
| 175 | AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data); | 175 | AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); |
| 176 | AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); | 176 | AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| 177 | AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); | 177 | AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| 178 | AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL); | 178 | AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); |
| 179 | AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); | 179 | AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| 180 | AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL); | 180 | AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); |
| 181 | AMBA_DEVICE(uart1, "dev:f2", PBA8_UART1, NULL); | 181 | AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); |
| 182 | AMBA_DEVICE(uart2, "dev:f3", PBA8_UART2, NULL); | 182 | AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); |
| 183 | AMBA_DEVICE(ssp0, "dev:f4", PBA8_SSP, NULL); | 183 | AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL); |
| 184 | 184 | ||
| 185 | /* Primecells on the NEC ISSP chip */ | 185 | /* Primecells on the NEC ISSP chip */ |
| 186 | AMBA_DEVICE(clcd, "issp:20", PBA8_CLCD, &clcd_plat_data); | 186 | AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); |
| 187 | AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); | 187 | AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); |
| 188 | 188 | ||
| 189 | static struct amba_device *amba_devs[] __initdata = { | 189 | static struct amba_device *amba_devs[] __initdata = { |
| 190 | &dmac_device, | 190 | &dmac_device, |
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ce6c5d25fbef..7e4bc6cdca52 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c | |||
| @@ -23,6 +23,7 @@ | |||
| 23 | #include <linux/sysdev.h> | 23 | #include <linux/sysdev.h> |
| 24 | #include <linux/amba/bus.h> | 24 | #include <linux/amba/bus.h> |
| 25 | #include <linux/amba/pl061.h> | 25 | #include <linux/amba/pl061.h> |
| 26 | #include <linux/amba/mmci.h> | ||
| 26 | #include <linux/io.h> | 27 | #include <linux/io.h> |
| 27 | 28 | ||
| 28 | #include <asm/irq.h> | 29 | #include <asm/irq.h> |
| @@ -34,7 +35,6 @@ | |||
| 34 | 35 | ||
| 35 | #include <asm/mach/arch.h> | 36 | #include <asm/mach/arch.h> |
| 36 | #include <asm/mach/map.h> | 37 | #include <asm/mach/map.h> |
| 37 | #include <asm/mach/mmc.h> | ||
| 38 | #include <asm/mach/time.h> | 38 | #include <asm/mach/time.h> |
| 39 | 39 | ||
| 40 | #include <mach/hardware.h> | 40 | #include <mach/hardware.h> |
| @@ -182,29 +182,29 @@ static struct pl061_platform_data gpio2_plat_data = { | |||
| 182 | #define PBX_SSP_DMA { 9, 8 } | 182 | #define PBX_SSP_DMA { 9, 8 } |
| 183 | 183 | ||
| 184 | /* FPGA Primecells */ | 184 | /* FPGA Primecells */ |
| 185 | AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); | 185 | AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| 186 | AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); | 186 | AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| 187 | AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); | 187 | AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| 188 | AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); | 188 | AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| 189 | AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL); | 189 | AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); |
| 190 | 190 | ||
| 191 | /* DevChip Primecells */ | 191 | /* DevChip Primecells */ |
| 192 | AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL); | 192 | AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL); |
| 193 | AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); | 193 | AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| 194 | AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL); | 194 | AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); |
| 195 | AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data); | 195 | AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); |
| 196 | AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); | 196 | AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| 197 | AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); | 197 | AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| 198 | AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL); | 198 | AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); |
| 199 | AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); | 199 | AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| 200 | AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL); | 200 | AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); |
| 201 | AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL); | 201 | AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); |
| 202 | AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL); | 202 | AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); |
| 203 | AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL); | 203 | AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL); |
| 204 | 204 | ||
| 205 | /* Primecells on the NEC ISSP chip */ | 205 | /* Primecells on the NEC ISSP chip */ |
| 206 | AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data); | 206 | AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); |
| 207 | AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); | 207 | AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); |
| 208 | 208 | ||
| 209 | static struct amba_device *amba_devs[] __initdata = { | 209 | static struct amba_device *amba_devs[] __initdata = { |
| 210 | &dmac_device, | 210 | &dmac_device, |
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d8c023d4df30..3d4e9da3fa52 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig | |||
| @@ -77,6 +77,7 @@ config ARCH_H1940 | |||
| 77 | select CPU_S3C2410 | 77 | select CPU_S3C2410 |
| 78 | select PM_H1940 if PM | 78 | select PM_H1940 if PM |
| 79 | select S3C_DEV_USB_HOST | 79 | select S3C_DEV_USB_HOST |
| 80 | select S3C_DEV_NAND | ||
| 80 | help | 81 | help |
| 81 | Say Y here if you are using the HP IPAQ H1940 | 82 | Say Y here if you are using the HP IPAQ H1940 |
| 82 | 83 | ||
| @@ -89,6 +90,7 @@ config MACH_N30 | |||
| 89 | bool "Acer N30 family" | 90 | bool "Acer N30 family" |
| 90 | select CPU_S3C2410 | 91 | select CPU_S3C2410 |
| 91 | select S3C_DEV_USB_HOST | 92 | select S3C_DEV_USB_HOST |
| 93 | select S3C_DEV_NAND | ||
| 92 | help | 94 | help |
| 93 | Say Y here if you want suppt for the Acer N30, Acer N35, | 95 | Say Y here if you want suppt for the Acer N30, Acer N35, |
| 94 | Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. | 96 | Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. |
| @@ -103,6 +105,7 @@ config ARCH_BAST | |||
| 103 | select S3C24XX_DCLK | 105 | select S3C24XX_DCLK |
| 104 | select ISA | 106 | select ISA |
| 105 | select S3C_DEV_USB_HOST | 107 | select S3C_DEV_USB_HOST |
| 108 | select S3C_DEV_NAND | ||
| 106 | help | 109 | help |
| 107 | Say Y here if you are using the Simtec Electronics EB2410ITX | 110 | Say Y here if you are using the Simtec Electronics EB2410ITX |
| 108 | development board (also known as BAST) | 111 | development board (also known as BAST) |
| @@ -111,6 +114,7 @@ config MACH_OTOM | |||
| 111 | bool "NexVision OTOM Board" | 114 | bool "NexVision OTOM Board" |
| 112 | select CPU_S3C2410 | 115 | select CPU_S3C2410 |
| 113 | select S3C_DEV_USB_HOST | 116 | select S3C_DEV_USB_HOST |
| 117 | select S3C_DEV_NAND | ||
| 114 | help | 118 | help |
| 115 | Say Y here if you are using the Nex Vision OTOM board | 119 | Say Y here if you are using the Nex Vision OTOM board |
| 116 | 120 | ||
| @@ -154,6 +158,7 @@ config MACH_QT2410 | |||
| 154 | bool "QT2410" | 158 | bool "QT2410" |
| 155 | select CPU_S3C2410 | 159 | select CPU_S3C2410 |
| 156 | select S3C_DEV_USB_HOST | 160 | select S3C_DEV_USB_HOST |
| 161 | select S3C_DEV_NAND | ||
| 157 | help | 162 | help |
| 158 | Say Y here if you are using the Armzone QT2410 | 163 | Say Y here if you are using the Armzone QT2410 |
| 159 | 164 | ||
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 35c1bde89cf2..c2bdc4635d12 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig | |||
| @@ -48,6 +48,7 @@ config MACH_JIVE | |||
| 48 | bool "Logitech Jive" | 48 | bool "Logitech Jive" |
| 49 | select CPU_S3C2412 | 49 | select CPU_S3C2412 |
| 50 | select S3C_DEV_USB_HOST | 50 | select S3C_DEV_USB_HOST |
| 51 | select S3C_DEV_NAND | ||
| 51 | help | 52 | help |
| 52 | Say Y here if you are using the Logitech Jive. | 53 | Say Y here if you are using the Logitech Jive. |
| 53 | 54 | ||
| @@ -61,6 +62,7 @@ config MACH_SMDK2413 | |||
| 61 | select MACH_S3C2413 | 62 | select MACH_S3C2413 |
| 62 | select MACH_SMDK | 63 | select MACH_SMDK |
| 63 | select S3C_DEV_USB_HOST | 64 | select S3C_DEV_USB_HOST |
| 65 | select S3C_DEV_NAND | ||
| 64 | help | 66 | help |
| 65 | Say Y here if you are using an SMDK2413 | 67 | Say Y here if you are using an SMDK2413 |
| 66 | 68 | ||
| @@ -84,6 +86,7 @@ config MACH_VSTMS | |||
| 84 | bool "VMSTMS" | 86 | bool "VMSTMS" |
| 85 | select CPU_S3C2412 | 87 | select CPU_S3C2412 |
| 86 | select S3C_DEV_USB_HOST | 88 | select S3C_DEV_USB_HOST |
| 89 | select S3C_DEV_NAND | ||
| 87 | help | 90 | help |
| 88 | Say Y here if you are using an VSTMS board | 91 | Say Y here if you are using an VSTMS board |
| 89 | 92 | ||
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 8ae1b288f7fa..d7bba919a77e 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig | |||
| @@ -48,6 +48,7 @@ config MACH_OSIRIS | |||
| 48 | select S3C2440_XTAL_12000000 | 48 | select S3C2440_XTAL_12000000 |
| 49 | select S3C2410_IOTIMING if S3C2440_CPUFREQ | 49 | select S3C2410_IOTIMING if S3C2440_CPUFREQ |
| 50 | select S3C_DEV_USB_HOST | 50 | select S3C_DEV_USB_HOST |
| 51 | select S3C_DEV_NAND | ||
| 51 | help | 52 | help |
| 52 | Say Y here if you are using the Simtec IM2440D20 module, also | 53 | Say Y here if you are using the Simtec IM2440D20 module, also |
| 53 | known as the Osiris. | 54 | known as the Osiris. |
| @@ -57,6 +58,7 @@ config MACH_RX3715 | |||
| 57 | select CPU_S3C2440 | 58 | select CPU_S3C2440 |
| 58 | select S3C2440_XTAL_16934400 | 59 | select S3C2440_XTAL_16934400 |
| 59 | select PM_H1940 if PM | 60 | select PM_H1940 if PM |
| 61 | select S3C_DEV_NAND | ||
| 60 | help | 62 | help |
| 61 | Say Y here if you are using the HP iPAQ rx3715. | 63 | Say Y here if you are using the HP iPAQ rx3715. |
| 62 | 64 | ||
| @@ -66,6 +68,7 @@ config ARCH_S3C2440 | |||
| 66 | select S3C2440_XTAL_16934400 | 68 | select S3C2440_XTAL_16934400 |
| 67 | select MACH_SMDK | 69 | select MACH_SMDK |
| 68 | select S3C_DEV_USB_HOST | 70 | select S3C_DEV_USB_HOST |
| 71 | select S3C_DEV_NAND | ||
| 69 | help | 72 | help |
| 70 | Say Y here if you are using the SMDK2440. | 73 | Say Y here if you are using the SMDK2440. |
| 71 | 74 | ||
| @@ -74,6 +77,7 @@ config MACH_NEXCODER_2440 | |||
| 74 | select CPU_S3C2440 | 77 | select CPU_S3C2440 |
| 75 | select S3C2440_XTAL_12000000 | 78 | select S3C2440_XTAL_12000000 |
| 76 | select S3C_DEV_USB_HOST | 79 | select S3C_DEV_USB_HOST |
| 80 | select S3C_DEV_NAND | ||
| 77 | help | 81 | help |
| 78 | Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board | 82 | Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board |
| 79 | 83 | ||
| @@ -88,6 +92,7 @@ config MACH_AT2440EVB | |||
| 88 | bool "Avantech AT2440EVB development board" | 92 | bool "Avantech AT2440EVB development board" |
| 89 | select CPU_S3C2440 | 93 | select CPU_S3C2440 |
| 90 | select S3C_DEV_USB_HOST | 94 | select S3C_DEV_USB_HOST |
| 95 | select S3C_DEV_NAND | ||
| 91 | help | 96 | help |
| 92 | Say Y here if you are using the AT2440EVB development board | 97 | Say Y here if you are using the AT2440EVB development board |
| 93 | 98 | ||
| @@ -97,6 +102,7 @@ config MACH_MINI2440 | |||
| 97 | select EEPROM_AT24 | 102 | select EEPROM_AT24 |
| 98 | select LEDS_TRIGGER_BACKLIGHT | 103 | select LEDS_TRIGGER_BACKLIGHT |
| 99 | select SND_S3C24XX_SOC_S3C24XX_UDA134X | 104 | select SND_S3C24XX_SOC_S3C24XX_UDA134X |
| 105 | select S3C_DEV_NAND | ||
| 100 | help | 106 | help |
| 101 | Say Y here to select support for the MINI2440. Is a 10cm x 10cm board | 107 | Say Y here to select support for the MINI2440. Is a 10cm x 10cm board |
| 102 | available via various sources. It can come with a 3.5" or 7" touch LCD. | 108 | available via various sources. It can come with a 3.5" or 7" touch LCD. |
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig index f5af212066c3..770b72067e3d 100644 --- a/arch/arm/mach-s3c6400/Kconfig +++ b/arch/arm/mach-s3c6400/Kconfig | |||
| @@ -26,6 +26,7 @@ config MACH_SMDK6400 | |||
| 26 | bool "SMDK6400" | 26 | bool "SMDK6400" |
| 27 | select CPU_S3C6400 | 27 | select CPU_S3C6400 |
| 28 | select S3C_DEV_HSMMC | 28 | select S3C_DEV_HSMMC |
| 29 | select S3C_DEV_NAND | ||
| 29 | select S3C6400_SETUP_SDHCI | 30 | select S3C6400_SETUP_SDHCI |
| 30 | help | 31 | help |
| 31 | Machine support for the Samsung SMDK6400 | 32 | Machine support for the Samsung SMDK6400 |
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index f9d0f09f9761..53fc3ff657f7 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig | |||
| @@ -102,6 +102,7 @@ config MACH_HMT | |||
| 102 | bool "Airgoo HMT" | 102 | bool "Airgoo HMT" |
| 103 | select CPU_S3C6410 | 103 | select CPU_S3C6410 |
| 104 | select S3C_DEV_FB | 104 | select S3C_DEV_FB |
| 105 | select S3C_DEV_NAND | ||
| 105 | select S3C_DEV_USB_HOST | 106 | select S3C_DEV_USB_HOST |
| 106 | select S3C64XX_SETUP_FB_24BPP | 107 | select S3C64XX_SETUP_FB_24BPP |
| 107 | select HAVE_PWM | 108 | select HAVE_PWM |
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index 95f9c5a6d6d5..cb4521a6f42d 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c | |||
| @@ -39,7 +39,7 @@ typedef struct { | |||
| 39 | 39 | ||
| 40 | static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; | 40 | static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; |
| 41 | 41 | ||
| 42 | static spinlock_t dma_list_lock; | 42 | static DEFINE_SPINLOCK(dma_list_lock); |
| 43 | 43 | ||
| 44 | 44 | ||
| 45 | static irqreturn_t dma_irq_handler(int irq, void *dev_id) | 45 | static irqreturn_t dma_irq_handler(int irq, void *dev_id) |
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 337b9aabce49..801b21e7f677 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig | |||
| @@ -81,6 +81,18 @@ config MACH_U300_SEMI_IS_SHARED | |||
| 81 | Memory Interface) from both from access and application | 81 | Memory Interface) from both from access and application |
| 82 | side. | 82 | side. |
| 83 | 83 | ||
| 84 | config MACH_U300_SPIDUMMY | ||
| 85 | bool "SSP/SPI dummy chip" | ||
| 86 | select SPI | ||
| 87 | select SPI_MASTER | ||
| 88 | select SPI_PL022 | ||
| 89 | help | ||
| 90 | This creates a small kernel module that creates a dummy | ||
| 91 | SPI device to be used for loopback tests. Regularly used | ||
| 92 | to test reference designs. If you're not testing SPI, | ||
| 93 | you don't need it. Selecting this will activate the | ||
| 94 | SPI framework and ARM PL022 support. | ||
| 95 | |||
| 84 | comment "All the settings below must match the bootloader's settings" | 96 | comment "All the settings below must match the bootloader's settings" |
| 85 | 97 | ||
| 86 | config MACH_U300_ACCESS_MEM_SIZE | 98 | config MACH_U300_ACCESS_MEM_SIZE |
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 24950e0df4b4..885b5c027c1e 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile | |||
| @@ -9,3 +9,6 @@ obj- := | |||
| 9 | 9 | ||
| 10 | obj-$(CONFIG_ARCH_U300) += u300.o | 10 | obj-$(CONFIG_ARCH_U300) += u300.o |
| 11 | obj-$(CONFIG_MMC) += mmc.o | 11 | obj-$(CONFIG_MMC) += mmc.o |
| 12 | obj-$(CONFIG_SPI_PL022) += spi.o | ||
| 13 | obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o | ||
| 14 | obj-$(CONFIG_I2C_STU300) += i2c.o | ||
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 2e9b8ccd8ec2..be60d6deee8b 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c | |||
| @@ -32,6 +32,8 @@ | |||
| 32 | 32 | ||
| 33 | #include "clock.h" | 33 | #include "clock.h" |
| 34 | #include "mmc.h" | 34 | #include "mmc.h" |
| 35 | #include "spi.h" | ||
| 36 | #include "i2c.h" | ||
| 35 | 37 | ||
| 36 | /* | 38 | /* |
| 37 | * Static I/O mappings that are needed for booting the U300 platforms. The | 39 | * Static I/O mappings that are needed for booting the U300 platforms. The |
| @@ -378,14 +380,14 @@ static struct platform_device wdog_device = { | |||
| 378 | }; | 380 | }; |
| 379 | 381 | ||
| 380 | static struct platform_device i2c0_device = { | 382 | static struct platform_device i2c0_device = { |
| 381 | .name = "stddci2c", | 383 | .name = "stu300", |
| 382 | .id = 0, | 384 | .id = 0, |
| 383 | .num_resources = ARRAY_SIZE(i2c0_resources), | 385 | .num_resources = ARRAY_SIZE(i2c0_resources), |
| 384 | .resource = i2c0_resources, | 386 | .resource = i2c0_resources, |
| 385 | }; | 387 | }; |
| 386 | 388 | ||
| 387 | static struct platform_device i2c1_device = { | 389 | static struct platform_device i2c1_device = { |
| 388 | .name = "stddci2c", | 390 | .name = "stu300", |
| 389 | .id = 1, | 391 | .id = 1, |
| 390 | .num_resources = ARRAY_SIZE(i2c1_resources), | 392 | .num_resources = ARRAY_SIZE(i2c1_resources), |
| 391 | .resource = i2c1_resources, | 393 | .resource = i2c1_resources, |
| @@ -611,6 +613,8 @@ void __init u300_init_devices(void) | |||
| 611 | /* Wait for the PLL208 to lock if not locked in yet */ | 613 | /* Wait for the PLL208 to lock if not locked in yet */ |
| 612 | while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & | 614 | while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & |
| 613 | U300_SYSCON_CSR_PLL208_LOCK_IND)); | 615 | U300_SYSCON_CSR_PLL208_LOCK_IND)); |
| 616 | /* Initialize SPI device with some board specifics */ | ||
| 617 | u300_spi_init(&pl022_device); | ||
| 614 | 618 | ||
| 615 | /* Register the AMBA devices in the AMBA bus abstraction layer */ | 619 | /* Register the AMBA devices in the AMBA bus abstraction layer */ |
| 616 | u300_clock_primecells(); | 620 | u300_clock_primecells(); |
| @@ -622,6 +626,12 @@ void __init u300_init_devices(void) | |||
| 622 | 626 | ||
| 623 | u300_assign_physmem(); | 627 | u300_assign_physmem(); |
| 624 | 628 | ||
| 629 | /* Register subdevices on the I2C buses */ | ||
| 630 | u300_i2c_register_board_devices(); | ||
| 631 | |||
| 632 | /* Register subdevices on the SPI bus */ | ||
| 633 | u300_spi_register_board_devices(); | ||
| 634 | |||
| 625 | /* Register the platform devices */ | 635 | /* Register the platform devices */ |
| 626 | platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); | 636 | platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); |
| 627 | 637 | ||
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c new file mode 100644 index 000000000000..962f9de454de --- /dev/null +++ b/arch/arm/mach-u300/dummyspichip.c | |||
| @@ -0,0 +1,290 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-u300/dummyspichip.c | ||
| 3 | * | ||
| 4 | * Copyright (C) 2007-2009 ST-Ericsson AB | ||
| 5 | * License terms: GNU General Public License (GPL) version 2 | ||
| 6 | * This is a dummy loopback SPI "chip" used for testing SPI. | ||
| 7 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 8 | */ | ||
| 9 | #include <linux/init.h> | ||
| 10 | #include <linux/module.h> | ||
| 11 | #include <linux/kernel.h> | ||
| 12 | #include <linux/device.h> | ||
| 13 | #include <linux/err.h> | ||
| 14 | #include <linux/sysfs.h> | ||
| 15 | #include <linux/mutex.h> | ||
| 16 | #include <linux/spi/spi.h> | ||
| 17 | #include <linux/dma-mapping.h> | ||
| 18 | /* | ||
| 19 | * WARNING! Do not include this pl022-specific controller header | ||
| 20 | * for any generic driver. It is only done in this dummy chip | ||
| 21 | * because we alter the chip configuration in order to test some | ||
| 22 | * different settings on the loopback device. Normal chip configs | ||
| 23 | * shall be STATIC and not altered by the driver! | ||
| 24 | */ | ||
| 25 | #include <linux/amba/pl022.h> | ||
| 26 | |||
| 27 | struct dummy { | ||
| 28 | struct device *dev; | ||
| 29 | struct mutex lock; | ||
| 30 | }; | ||
| 31 | |||
| 32 | #define DMA_TEST_SIZE 2048 | ||
| 33 | |||
| 34 | /* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */ | ||
| 35 | static ssize_t dummy_looptest(struct device *dev, | ||
| 36 | struct device_attribute *attr, char *buf) | ||
| 37 | { | ||
| 38 | struct spi_device *spi = to_spi_device(dev); | ||
| 39 | struct dummy *p_dummy = dev_get_drvdata(&spi->dev); | ||
| 40 | |||
| 41 | /* | ||
| 42 | * WARNING! Do not dereference the chip-specific data in any normal | ||
| 43 | * driver for a chip. It is usually STATIC and shall not be read | ||
| 44 | * or written to. Your chip driver should NOT depend on fields in this | ||
| 45 | * struct, this is just used here to alter the behaviour of the chip | ||
| 46 | * in order to perform tests. | ||
| 47 | */ | ||
| 48 | struct pl022_config_chip *chip_info = spi->controller_data; | ||
| 49 | int status; | ||
| 50 | u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD, | ||
| 51 | 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05, | ||
| 52 | 0xF0, 0x0D}; | ||
| 53 | u8 rxbuf[14]; | ||
| 54 | u8 *bigtxbuf_virtual; | ||
| 55 | u8 *bigrxbuf_virtual; | ||
| 56 | |||
| 57 | if (mutex_lock_interruptible(&p_dummy->lock)) | ||
| 58 | return -ERESTARTSYS; | ||
| 59 | |||
| 60 | bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL); | ||
| 61 | if (bigtxbuf_virtual == NULL) { | ||
| 62 | status = -ENOMEM; | ||
| 63 | goto out; | ||
| 64 | } | ||
| 65 | bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL); | ||
| 66 | |||
| 67 | /* Fill TXBUF with some happy pattern */ | ||
| 68 | memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE); | ||
| 69 | |||
| 70 | /* | ||
| 71 | * Force chip to 8 bit mode | ||
| 72 | * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! | ||
| 73 | */ | ||
| 74 | chip_info->data_size = SSP_DATA_BITS_8; | ||
| 75 | /* You should NOT DO THIS EITHER */ | ||
| 76 | spi->master->setup(spi); | ||
| 77 | |||
| 78 | /* Now run the tests for 8bit mode */ | ||
| 79 | pr_info("Simple test 1: write 0xAA byte, read back garbage byte " | ||
| 80 | "in 8bit mode\n"); | ||
| 81 | status = spi_w8r8(spi, 0xAA); | ||
| 82 | if (status < 0) | ||
| 83 | pr_warning("Siple test 1: FAILURE: spi_write_then_read " | ||
| 84 | "failed with status %d\n", status); | ||
| 85 | else | ||
| 86 | pr_info("Simple test 1: SUCCESS!\n"); | ||
| 87 | |||
| 88 | pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage " | ||
| 89 | "in 8bit mode (full FIFO)\n"); | ||
| 90 | status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8); | ||
| 91 | if (status < 0) | ||
| 92 | pr_warning("Simple test 2: FAILURE: spi_write_then_read() " | ||
| 93 | "failed with status %d\n", status); | ||
| 94 | else | ||
| 95 | pr_info("Simple test 2: SUCCESS!\n"); | ||
| 96 | |||
| 97 | pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage " | ||
| 98 | "in 8bit mode (see if we overflow FIFO)\n"); | ||
| 99 | status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14); | ||
| 100 | if (status < 0) | ||
| 101 | pr_warning("Simple test 3: FAILURE: failed with status %d " | ||
| 102 | "(probably FIFO overrun)\n", status); | ||
| 103 | else | ||
| 104 | pr_info("Simple test 3: SUCCESS!\n"); | ||
| 105 | |||
| 106 | pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 " | ||
| 107 | "bytes garbage with spi_read() in 8bit mode\n"); | ||
| 108 | status = spi_write(spi, &txbuf[0], 8); | ||
| 109 | if (status < 0) | ||
| 110 | pr_warning("Simple test 4 step 1: FAILURE: spi_write() " | ||
| 111 | "failed with status %d\n", status); | ||
| 112 | else | ||
| 113 | pr_info("Simple test 4 step 1: SUCCESS!\n"); | ||
| 114 | status = spi_read(spi, &rxbuf[0], 8); | ||
| 115 | if (status < 0) | ||
| 116 | pr_warning("Simple test 4 step 2: FAILURE: spi_read() " | ||
| 117 | "failed with status %d\n", status); | ||
| 118 | else | ||
| 119 | pr_info("Simple test 4 step 2: SUCCESS!\n"); | ||
| 120 | |||
| 121 | pr_info("Simple test 5: write 14 bytes with spi_write(), read " | ||
| 122 | "14 bytes garbage with spi_read() in 8bit mode\n"); | ||
| 123 | status = spi_write(spi, &txbuf[0], 14); | ||
| 124 | if (status < 0) | ||
| 125 | pr_warning("Simple test 5 step 1: FAILURE: spi_write() " | ||
| 126 | "failed with status %d (probably FIFO overrun)\n", | ||
| 127 | status); | ||
| 128 | else | ||
| 129 | pr_info("Simple test 5 step 1: SUCCESS!\n"); | ||
| 130 | status = spi_read(spi, &rxbuf[0], 14); | ||
| 131 | if (status < 0) | ||
| 132 | pr_warning("Simple test 5 step 2: FAILURE: spi_read() " | ||
| 133 | "failed with status %d (probably FIFO overrun)\n", | ||
| 134 | status); | ||
| 135 | else | ||
| 136 | pr_info("Simple test 5: SUCCESS!\n"); | ||
| 137 | |||
| 138 | pr_info("Simple test 6: write %d bytes with spi_write(), " | ||
| 139 | "read %d bytes garbage with spi_read() in 8bit mode\n", | ||
| 140 | DMA_TEST_SIZE, DMA_TEST_SIZE); | ||
| 141 | status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE); | ||
| 142 | if (status < 0) | ||
| 143 | pr_warning("Simple test 6 step 1: FAILURE: spi_write() " | ||
| 144 | "failed with status %d (probably FIFO overrun)\n", | ||
| 145 | status); | ||
| 146 | else | ||
| 147 | pr_info("Simple test 6 step 1: SUCCESS!\n"); | ||
| 148 | status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE); | ||
| 149 | if (status < 0) | ||
| 150 | pr_warning("Simple test 6 step 2: FAILURE: spi_read() " | ||
| 151 | "failed with status %d (probably FIFO overrun)\n", | ||
| 152 | status); | ||
| 153 | else | ||
| 154 | pr_info("Simple test 6: SUCCESS!\n"); | ||
| 155 | |||
| 156 | |||
| 157 | /* | ||
| 158 | * Force chip to 16 bit mode | ||
| 159 | * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! | ||
| 160 | */ | ||
| 161 | chip_info->data_size = SSP_DATA_BITS_16; | ||
| 162 | /* You should NOT DO THIS EITHER */ | ||
| 163 | spi->master->setup(spi); | ||
| 164 | |||
| 165 | pr_info("Simple test 7: write 0xAA byte, read back garbage byte " | ||
| 166 | "in 16bit bus mode\n"); | ||
| 167 | status = spi_w8r8(spi, 0xAA); | ||
| 168 | if (status == -EIO) | ||
| 169 | pr_info("Simple test 7: SUCCESS! (expected failure with " | ||
| 170 | "status EIO)\n"); | ||
| 171 | else if (status < 0) | ||
| 172 | pr_warning("Siple test 7: FAILURE: spi_write_then_read " | ||
| 173 | "failed with status %d\n", status); | ||
| 174 | else | ||
| 175 | pr_warning("Siple test 7: FAILURE: spi_write_then_read " | ||
| 176 | "succeeded but it was expected to fail!\n"); | ||
| 177 | |||
| 178 | pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage " | ||
| 179 | "in 16bit mode (full FIFO)\n"); | ||
| 180 | status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8); | ||
| 181 | if (status < 0) | ||
| 182 | pr_warning("Simple test 8: FAILURE: spi_write_then_read() " | ||
| 183 | "failed with status %d\n", status); | ||
| 184 | else | ||
| 185 | pr_info("Simple test 8: SUCCESS!\n"); | ||
| 186 | |||
| 187 | pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage " | ||
| 188 | "in 16bit mode (see if we overflow FIFO)\n"); | ||
| 189 | status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14); | ||
| 190 | if (status < 0) | ||
| 191 | pr_warning("Simple test 9: FAILURE: failed with status %d " | ||
| 192 | "(probably FIFO overrun)\n", status); | ||
| 193 | else | ||
| 194 | pr_info("Simple test 9: SUCCESS!\n"); | ||
| 195 | |||
| 196 | pr_info("Simple test 10: write %d bytes with spi_write(), " | ||
| 197 | "read %d bytes garbage with spi_read() in 16bit mode\n", | ||
| 198 | DMA_TEST_SIZE, DMA_TEST_SIZE); | ||
| 199 | status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE); | ||
| 200 | if (status < 0) | ||
| 201 | pr_warning("Simple test 10 step 1: FAILURE: spi_write() " | ||
| 202 | "failed with status %d (probably FIFO overrun)\n", | ||
| 203 | status); | ||
| 204 | else | ||
| 205 | pr_info("Simple test 10 step 1: SUCCESS!\n"); | ||
| 206 | |||
| 207 | status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE); | ||
| 208 | if (status < 0) | ||
| 209 | pr_warning("Simple test 10 step 2: FAILURE: spi_read() " | ||
| 210 | "failed with status %d (probably FIFO overrun)\n", | ||
| 211 | status); | ||
| 212 | else | ||
| 213 | pr_info("Simple test 10: SUCCESS!\n"); | ||
| 214 | |||
| 215 | status = sprintf(buf, "loop test complete\n"); | ||
| 216 | kfree(bigrxbuf_virtual); | ||
| 217 | kfree(bigtxbuf_virtual); | ||
| 218 | out: | ||
| 219 | mutex_unlock(&p_dummy->lock); | ||
| 220 | return status; | ||
| 221 | } | ||
| 222 | |||
| 223 | static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL); | ||
| 224 | |||
| 225 | static int __devinit pl022_dummy_probe(struct spi_device *spi) | ||
| 226 | { | ||
| 227 | struct dummy *p_dummy; | ||
| 228 | int status; | ||
| 229 | |||
| 230 | dev_info(&spi->dev, "probing dummy SPI device\n"); | ||
| 231 | |||
| 232 | p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL); | ||
| 233 | if (!p_dummy) | ||
| 234 | return -ENOMEM; | ||
| 235 | |||
| 236 | dev_set_drvdata(&spi->dev, p_dummy); | ||
| 237 | mutex_init(&p_dummy->lock); | ||
| 238 | |||
| 239 | /* sysfs hook */ | ||
| 240 | status = device_create_file(&spi->dev, &dev_attr_looptest); | ||
| 241 | if (status) { | ||
| 242 | dev_dbg(&spi->dev, "device_create_file looptest failure.\n"); | ||
| 243 | goto out_dev_create_looptest_failed; | ||
| 244 | } | ||
| 245 | |||
| 246 | return 0; | ||
| 247 | |||
| 248 | out_dev_create_looptest_failed: | ||
| 249 | dev_set_drvdata(&spi->dev, NULL); | ||
| 250 | kfree(p_dummy); | ||
| 251 | return status; | ||
| 252 | } | ||
| 253 | |||
| 254 | static int __devexit pl022_dummy_remove(struct spi_device *spi) | ||
| 255 | { | ||
| 256 | struct dummy *p_dummy = dev_get_drvdata(&spi->dev); | ||
| 257 | |||
| 258 | dev_info(&spi->dev, "removing dummy SPI device\n"); | ||
| 259 | device_remove_file(&spi->dev, &dev_attr_looptest); | ||
| 260 | dev_set_drvdata(&spi->dev, NULL); | ||
| 261 | kfree(p_dummy); | ||
| 262 | |||
| 263 | return 0; | ||
| 264 | } | ||
| 265 | |||
| 266 | static struct spi_driver pl022_dummy_driver = { | ||
| 267 | .driver = { | ||
| 268 | .name = "spi-dummy", | ||
| 269 | .owner = THIS_MODULE, | ||
| 270 | }, | ||
| 271 | .probe = pl022_dummy_probe, | ||
| 272 | .remove = __devexit_p(pl022_dummy_remove), | ||
| 273 | }; | ||
| 274 | |||
| 275 | static int __init pl022_init_dummy(void) | ||
| 276 | { | ||
| 277 | return spi_register_driver(&pl022_dummy_driver); | ||
| 278 | } | ||
| 279 | |||
| 280 | static void __exit pl022_exit_dummy(void) | ||
| 281 | { | ||
| 282 | spi_unregister_driver(&pl022_dummy_driver); | ||
| 283 | } | ||
| 284 | |||
| 285 | module_init(pl022_init_dummy); | ||
| 286 | module_exit(pl022_exit_dummy); | ||
| 287 | |||
| 288 | MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); | ||
| 289 | MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver"); | ||
| 290 | MODULE_LICENSE("GPL"); | ||
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c index 308cdb197a92..63c8f27fb15a 100644 --- a/arch/arm/mach-u300/gpio.c +++ b/arch/arm/mach-u300/gpio.c | |||
| @@ -25,11 +25,6 @@ | |||
| 25 | #include <linux/platform_device.h> | 25 | #include <linux/platform_device.h> |
| 26 | #include <linux/gpio.h> | 26 | #include <linux/gpio.h> |
| 27 | 27 | ||
| 28 | /* Need access to SYSCON registers for PADmuxing */ | ||
| 29 | #include <mach/syscon.h> | ||
| 30 | |||
| 31 | #include "padmux.h" | ||
| 32 | |||
| 33 | /* Reference to GPIO block clock */ | 28 | /* Reference to GPIO block clock */ |
| 34 | static struct clk *clk; | 29 | static struct clk *clk; |
| 35 | 30 | ||
| @@ -606,14 +601,6 @@ static int __init gpio_probe(struct platform_device *pdev) | |||
| 606 | writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); | 601 | writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); |
| 607 | #endif | 602 | #endif |
| 608 | 603 | ||
| 609 | /* Set up some padmuxing here */ | ||
| 610 | #ifdef CONFIG_MMC | ||
| 611 | pmx_set_mission_mode_mmc(); | ||
| 612 | #endif | ||
| 613 | #ifdef CONFIG_SPI_PL022 | ||
| 614 | pmx_set_mission_mode_spi(); | ||
| 615 | #endif | ||
| 616 | |||
| 617 | gpio_set_initial_values(); | 604 | gpio_set_initial_values(); |
| 618 | 605 | ||
| 619 | for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { | 606 | for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { |
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c new file mode 100644 index 000000000000..10be1f888b27 --- /dev/null +++ b/arch/arm/mach-u300/i2c.c | |||
| @@ -0,0 +1,43 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-u300/i2c.c | ||
| 3 | * | ||
| 4 | * Copyright (C) 2009 ST-Ericsson AB | ||
| 5 | * License terms: GNU General Public License (GPL) version 2 | ||
| 6 | * | ||
| 7 | * Register board i2c devices | ||
| 8 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 9 | */ | ||
| 10 | #include <linux/kernel.h> | ||
| 11 | #include <linux/i2c.h> | ||
| 12 | #include <mach/irqs.h> | ||
| 13 | |||
| 14 | static struct i2c_board_info __initdata bus0_i2c_board_info[] = { | ||
| 15 | { | ||
| 16 | .type = "ab3100", | ||
| 17 | .addr = 0x48, | ||
| 18 | .irq = IRQ_U300_IRQ0_EXT, | ||
| 19 | }, | ||
| 20 | }; | ||
| 21 | |||
| 22 | static struct i2c_board_info __initdata bus1_i2c_board_info[] = { | ||
| 23 | #ifdef CONFIG_MACH_U300_BS335 | ||
| 24 | { | ||
| 25 | .type = "fwcam", | ||
| 26 | .addr = 0x10, | ||
| 27 | }, | ||
| 28 | { | ||
| 29 | .type = "fwcam", | ||
| 30 | .addr = 0x5d, | ||
| 31 | }, | ||
| 32 | #else | ||
| 33 | { }, | ||
| 34 | #endif | ||
| 35 | }; | ||
| 36 | |||
| 37 | void __init u300_i2c_register_board_devices(void) | ||
| 38 | { | ||
| 39 | i2c_register_board_info(0, bus0_i2c_board_info, | ||
| 40 | ARRAY_SIZE(bus0_i2c_board_info)); | ||
| 41 | i2c_register_board_info(1, bus1_i2c_board_info, | ||
| 42 | ARRAY_SIZE(bus1_i2c_board_info)); | ||
| 43 | } | ||
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h new file mode 100644 index 000000000000..485c02e5c06d --- /dev/null +++ b/arch/arm/mach-u300/i2c.h | |||
| @@ -0,0 +1,23 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-u300/i2c.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 2009 ST-Ericsson AB | ||
| 5 | * License terms: GNU General Public License (GPL) version 2 | ||
| 6 | * | ||
| 7 | * Register board i2c devices | ||
| 8 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 9 | */ | ||
| 10 | |||
| 11 | #ifndef MACH_U300_I2C_H | ||
| 12 | #define MACH_U300_I2C_H | ||
| 13 | |||
| 14 | #ifdef CONFIG_I2C_STU300 | ||
| 15 | void __init u300_i2c_register_board_devices(void); | ||
| 16 | #else | ||
| 17 | /* Compile out this stuff if no I2C adapter is available */ | ||
| 18 | static inline void __init u300_i2c_register_board_devices(void) | ||
| 19 | { | ||
| 20 | } | ||
| 21 | #endif | ||
| 22 | |||
| 23 | #endif | ||
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index bf134bcc129d..ab000df7fc03 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h | |||
| @@ -35,6 +35,14 @@ | |||
| 35 | #endif | 35 | #endif |
| 36 | 36 | ||
| 37 | /* | 37 | /* |
| 38 | * TCM memory whereabouts | ||
| 39 | */ | ||
| 40 | #define ITCM_OFFSET 0xffff2000 | ||
| 41 | #define ITCM_END 0xffff3fff | ||
| 42 | #define DTCM_OFFSET 0xffff4000 | ||
| 43 | #define DTCM_END 0xffff5fff | ||
| 44 | |||
| 45 | /* | ||
| 38 | * We enable a real big DMA buffer if need be. | 46 | * We enable a real big DMA buffer if need be. |
| 39 | */ | 47 | */ |
| 40 | #define CONSISTENT_DMA_SIZE SZ_4M | 48 | #define CONSISTENT_DMA_SIZE SZ_4M |
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 1c90d1b1ccb6..7444f5c7da97 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h | |||
| @@ -240,8 +240,13 @@ | |||
| 240 | #define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) | 240 | #define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) |
| 241 | #define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) | 241 | #define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) |
| 242 | #define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) | 242 | #define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) |
| 243 | #ifdef CONFIG_MACH_U300_BS335 | ||
| 244 | #define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000) | ||
| 245 | #define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000) | ||
| 246 | #elif CONFIG_MACH_U300_BS365 | ||
| 243 | #define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) | 247 | #define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) |
| 244 | #define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) | 248 | #define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) |
| 249 | #endif | ||
| 245 | #define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) | 250 | #define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) |
| 246 | #define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) | 251 | #define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) |
| 247 | #define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) | 252 | #define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) |
| @@ -345,19 +350,69 @@ | |||
| 345 | #define U300_SYSCON_MMCR_MASK (0x0003) | 350 | #define U300_SYSCON_MMCR_MASK (0x0003) |
| 346 | #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) | 351 | #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) |
| 347 | #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) | 352 | #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) |
| 348 | 353 | /* Pull up/down control (R/W) */ | |
| 354 | #define U300_SYSCON_PUCR (0x104) | ||
| 355 | #define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200) | ||
| 356 | #define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100) | ||
| 357 | #define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) | ||
| 358 | #define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) | ||
| 359 | #define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) | ||
| 360 | /* Padmux 2 control */ | ||
| 361 | #define U300_SYSCON_PMC2R (0x100) | ||
| 362 | #define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0) | ||
| 363 | #define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000) | ||
| 364 | #define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040) | ||
| 365 | #define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080) | ||
| 366 | #define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0) | ||
| 367 | #define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300) | ||
| 368 | #define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000) | ||
| 369 | #define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100) | ||
| 370 | #define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200) | ||
| 371 | #define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300) | ||
| 372 | #define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00) | ||
| 373 | #define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000) | ||
| 374 | #define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400) | ||
| 375 | #define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800) | ||
| 376 | #define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00) | ||
| 377 | #define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000) | ||
| 378 | #define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000) | ||
| 379 | #define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000) | ||
| 380 | #define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000) | ||
| 381 | #define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000) | ||
| 382 | #define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000) | ||
| 383 | #define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000) | ||
| 384 | #define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000) | ||
| 385 | #define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000) | ||
| 386 | #define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000) | ||
| 349 | /* TODO: More SYSCON registers missing */ | 387 | /* TODO: More SYSCON registers missing */ |
| 350 | #define U300_SYSCON_PMC3R (0x10c) | 388 | #define U300_SYSCON_PMC3R (0x10c) |
| 351 | #define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) | 389 | #define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) |
| 352 | #define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) | 390 | #define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) |
| 353 | #define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) | 391 | #define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) |
| 354 | #define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) | 392 | #define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) |
| 355 | /* TODO: Missing other configs, I just added the SPI stuff */ | 393 | /* TODO: Missing other configs */ |
| 356 | 394 | #define U300_SYSCON_PMC4R (0x168) | |
| 395 | #define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003) | ||
| 396 | #define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000) | ||
| 397 | #define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C) | ||
| 398 | #define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000) | ||
| 399 | #define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004) | ||
| 400 | #define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008) | ||
| 401 | #define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C) | ||
| 402 | #define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030) | ||
| 403 | #define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000) | ||
| 404 | #define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010) | ||
| 405 | #define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020) | ||
| 406 | #define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030) | ||
| 407 | #define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300) | ||
| 408 | #define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000) | ||
| 409 | #define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100) | ||
| 410 | #define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200) | ||
| 357 | /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ | 411 | /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ |
| 358 | #define U300_SYSCON_S0CCR (0x120) | 412 | #define U300_SYSCON_S0CCR (0x120) |
| 359 | #define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) | 413 | #define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) |
| 360 | #define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) | 414 | #define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) |
| 415 | #define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) | ||
| 361 | #define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) | 416 | #define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) |
| 362 | #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) | 417 | #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) |
| 363 | #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) | 418 | #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) |
| @@ -375,6 +430,7 @@ | |||
| 375 | #define U300_SYSCON_S1CCR (0x124) | 430 | #define U300_SYSCON_S1CCR (0x124) |
| 376 | #define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) | 431 | #define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) |
| 377 | #define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) | 432 | #define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) |
| 433 | #define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) | ||
| 378 | #define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) | 434 | #define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) |
| 379 | #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) | 435 | #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) |
| 380 | #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) | 436 | #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) |
| @@ -393,6 +449,7 @@ | |||
| 393 | #define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) | 449 | #define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) |
| 394 | #define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) | 450 | #define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) |
| 395 | #define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) | 451 | #define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) |
| 452 | #define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) | ||
| 396 | #define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) | 453 | #define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) |
| 397 | #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) | 454 | #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) |
| 398 | #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) | 455 | #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) |
| @@ -425,6 +482,44 @@ | |||
| 425 | #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) | 482 | #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) |
| 426 | #define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) | 483 | #define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) |
| 427 | #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) | 484 | #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) |
| 485 | /* SC_PLL_IRQ_CONTROL 16bit (R/W) */ | ||
| 486 | #define U300_SYSCON_PICR (0x0130) | ||
| 487 | #define U300_SYSCON_PICR_MASK (0x00FF) | ||
| 488 | #define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) | ||
| 489 | #define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) | ||
| 490 | #define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) | ||
| 491 | #define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) | ||
| 492 | #define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) | ||
| 493 | #define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) | ||
| 494 | #define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) | ||
| 495 | #define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) | ||
| 496 | /* SC_PLL_IRQ_STATUS 16 bit (R/-) */ | ||
| 497 | #define U300_SYSCON_PISR (0x0134) | ||
| 498 | #define U300_SYSCON_PISR_MASK (0x000F) | ||
| 499 | #define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) | ||
| 500 | #define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) | ||
| 501 | #define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) | ||
| 502 | #define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) | ||
| 503 | /* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ | ||
| 504 | #define U300_SYSCON_PICLR (0x0138) | ||
| 505 | #define U300_SYSCON_PICLR_MASK (0x000F) | ||
| 506 | #define U300_SYSCON_PICLR_RWMASK (0x0000) | ||
| 507 | #define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) | ||
| 508 | #define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) | ||
| 509 | #define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) | ||
| 510 | #define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) | ||
| 511 | /* CAMIF_CONTROL 16 bit (-/W) */ | ||
| 512 | #define U300_SYSCON_CICR (0x013C) | ||
| 513 | #define U300_SYSCON_CICR_MASK (0x0FFF) | ||
| 514 | #define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00) | ||
| 515 | #define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00) | ||
| 516 | #define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300) | ||
| 517 | #define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0) | ||
| 518 | #define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0) | ||
| 519 | #define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030) | ||
| 520 | #define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F) | ||
| 521 | #define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C) | ||
| 522 | #define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003) | ||
| 428 | /* Clock activity observability register 0 */ | 523 | /* Clock activity observability register 0 */ |
| 429 | #define U300_SYSCON_C0OAR (0x140) | 524 | #define U300_SYSCON_C0OAR (0x140) |
| 430 | #define U300_SYSCON_C0OAR_MASK (0xFFFF) | 525 | #define U300_SYSCON_C0OAR_MASK (0xFFFF) |
| @@ -513,7 +608,7 @@ | |||
| 513 | /** | 608 | /** |
| 514 | * CPU medium frequency in MHz | 609 | * CPU medium frequency in MHz |
| 515 | */ | 610 | */ |
| 516 | #define SYSCON_CPU_CLOCK_MEDIUM 104 | 611 | #define SYSCON_CPU_CLOCK_MEDIUM 52 |
| 517 | /** | 612 | /** |
| 518 | * CPU low frequency in MHz | 613 | * CPU low frequency in MHz |
| 519 | */ | 614 | */ |
| @@ -527,7 +622,7 @@ | |||
| 527 | /** | 622 | /** |
| 528 | * EMIF medium frequency in MHz | 623 | * EMIF medium frequency in MHz |
| 529 | */ | 624 | */ |
| 530 | #define SYSCON_EMIF_CLOCK_MEDIUM 104 | 625 | #define SYSCON_EMIF_CLOCK_MEDIUM 52 |
| 531 | /** | 626 | /** |
| 532 | * EMIF low frequency in MHz | 627 | * EMIF low frequency in MHz |
| 533 | */ | 628 | */ |
| @@ -541,7 +636,7 @@ | |||
| 541 | /** | 636 | /** |
| 542 | * AHB medium frequency in MHz | 637 | * AHB medium frequency in MHz |
| 543 | */ | 638 | */ |
| 544 | #define SYSCON_AHB_CLOCK_MEDIUM 52 | 639 | #define SYSCON_AHB_CLOCK_MEDIUM 26 |
| 545 | /** | 640 | /** |
| 546 | * AHB low frequency in MHz | 641 | * AHB low frequency in MHz |
| 547 | */ | 642 | */ |
| @@ -553,6 +648,15 @@ enum syscon_busmaster { | |||
| 553 | SYSCON_BM_VIDEO_ENC | 648 | SYSCON_BM_VIDEO_ENC |
| 554 | }; | 649 | }; |
| 555 | 650 | ||
| 651 | /* Selectr a resistor or a set of resistors */ | ||
| 652 | enum syscon_pull_up_down { | ||
| 653 | SYSCON_PU_KEY_IN_EN, | ||
| 654 | SYSCON_PU_EMIF_1_8_BIT_EN, | ||
| 655 | SYSCON_PU_EMIF_1_16_BIT_EN, | ||
| 656 | SYSCON_PU_EMIF_1_NFIF_READY_EN, | ||
| 657 | SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN, | ||
| 658 | }; | ||
| 659 | |||
| 556 | /* | 660 | /* |
| 557 | * Note that this array must match the order of the array "clk_reg" | 661 | * Note that this array must match the order of the array "clk_reg" |
| 558 | * in syscon.c | 662 | * in syscon.c |
| @@ -575,6 +679,7 @@ enum syscon_clk { | |||
| 575 | SYSCON_CLKCONTROL_SPI, | 679 | SYSCON_CLKCONTROL_SPI, |
| 576 | SYSCON_CLKCONTROL_I2S0_CORE, | 680 | SYSCON_CLKCONTROL_I2S0_CORE, |
| 577 | SYSCON_CLKCONTROL_I2S1_CORE, | 681 | SYSCON_CLKCONTROL_I2S1_CORE, |
| 682 | SYSCON_CLKCONTROL_UART1, | ||
| 578 | SYSCON_CLKCONTROL_AAIF, | 683 | SYSCON_CLKCONTROL_AAIF, |
| 579 | SYSCON_CLKCONTROL_AHB, | 684 | SYSCON_CLKCONTROL_AHB, |
| 580 | SYSCON_CLKCONTROL_APEX, | 685 | SYSCON_CLKCONTROL_APEX, |
| @@ -604,7 +709,8 @@ enum syscon_sysclk_mode { | |||
| 604 | 709 | ||
| 605 | enum syscon_sysclk_req { | 710 | enum syscon_sysclk_req { |
| 606 | SYSCON_SYSCLKREQ_DISABLED, | 711 | SYSCON_SYSCLKREQ_DISABLED, |
| 607 | SYSCON_SYSCLKREQ_ACTIVE_LOW | 712 | SYSCON_SYSCLKREQ_ACTIVE_LOW, |
| 713 | SYSCON_SYSCLKREQ_MONITOR | ||
| 608 | }; | 714 | }; |
| 609 | 715 | ||
| 610 | enum syscon_clk_mode { | 716 | enum syscon_clk_mode { |
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 585cc013639d..7b6b016786bb 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c | |||
| @@ -19,15 +19,16 @@ | |||
| 19 | #include <linux/regulator/consumer.h> | 19 | #include <linux/regulator/consumer.h> |
| 20 | #include <linux/regulator/machine.h> | 20 | #include <linux/regulator/machine.h> |
| 21 | #include <linux/gpio.h> | 21 | #include <linux/gpio.h> |
| 22 | #include <linux/amba/mmci.h> | ||
| 22 | 23 | ||
| 23 | #include <asm/mach/mmc.h> | ||
| 24 | #include "mmc.h" | 24 | #include "mmc.h" |
| 25 | #include "padmux.h" | ||
| 25 | 26 | ||
| 26 | struct mmci_card_event { | 27 | struct mmci_card_event { |
| 27 | struct input_dev *mmc_input; | 28 | struct input_dev *mmc_input; |
| 28 | int mmc_inserted; | 29 | int mmc_inserted; |
| 29 | struct work_struct workq; | 30 | struct work_struct workq; |
| 30 | struct mmc_platform_data mmc0_plat_data; | 31 | struct mmci_platform_data mmc0_plat_data; |
| 31 | }; | 32 | }; |
| 32 | 33 | ||
| 33 | static unsigned int mmc_status(struct device *dev) | 34 | static unsigned int mmc_status(struct device *dev) |
| @@ -146,6 +147,7 @@ int __devinit mmc_init(struct amba_device *adev) | |||
| 146 | { | 147 | { |
| 147 | struct mmci_card_event *mmci_card; | 148 | struct mmci_card_event *mmci_card; |
| 148 | struct device *mmcsd_device = &adev->dev; | 149 | struct device *mmcsd_device = &adev->dev; |
| 150 | struct pmx *pmx; | ||
| 149 | int ret = 0; | 151 | int ret = 0; |
| 150 | 152 | ||
| 151 | mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); | 153 | mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); |
| @@ -158,6 +160,8 @@ int __devinit mmc_init(struct amba_device *adev) | |||
| 158 | mmci_card->mmc0_plat_data.status = mmc_status; | 160 | mmci_card->mmc0_plat_data.status = mmc_status; |
| 159 | mmci_card->mmc0_plat_data.gpio_wp = -1; | 161 | mmci_card->mmc0_plat_data.gpio_wp = -1; |
| 160 | mmci_card->mmc0_plat_data.gpio_cd = -1; | 162 | mmci_card->mmc0_plat_data.gpio_cd = -1; |
| 163 | mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED | | ||
| 164 | MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA; | ||
| 161 | 165 | ||
| 162 | mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; | 166 | mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; |
| 163 | 167 | ||
| @@ -207,6 +211,20 @@ int __devinit mmc_init(struct amba_device *adev) | |||
| 207 | 211 | ||
| 208 | input_set_drvdata(mmci_card->mmc_input, mmci_card); | 212 | input_set_drvdata(mmci_card->mmc_input, mmci_card); |
| 209 | 213 | ||
| 214 | /* | ||
| 215 | * Setup padmuxing for MMC. Since this must always be | ||
| 216 | * compiled into the kernel, pmx is never released. | ||
| 217 | */ | ||
| 218 | pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING); | ||
| 219 | |||
| 220 | if (IS_ERR(pmx)) | ||
| 221 | pr_warning("Could not get padmux handle\n"); | ||
| 222 | else { | ||
| 223 | ret = pmx_activate(mmcsd_device, pmx); | ||
| 224 | if (IS_ERR_VALUE(ret)) | ||
| 225 | pr_warning("Could not activate padmuxing\n"); | ||
| 226 | } | ||
| 227 | |||
| 210 | ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, | 228 | ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, |
| 211 | mmci_card); | 229 | mmci_card); |
| 212 | 230 | ||
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c index f3664564f086..4c93c6cefd37 100644 --- a/arch/arm/mach-u300/padmux.c +++ b/arch/arm/mach-u300/padmux.c | |||
| @@ -6,53 +6,362 @@ | |||
| 6 | * Copyright (C) 2009 ST-Ericsson AB | 6 | * Copyright (C) 2009 ST-Ericsson AB |
| 7 | * License terms: GNU General Public License (GPL) version 2 | 7 | * License terms: GNU General Public License (GPL) version 2 |
| 8 | * U300 PADMUX functions | 8 | * U300 PADMUX functions |
| 9 | * Author: Linus Walleij <linus.walleij@stericsson.com> | 9 | * Author: Martin Persson <martin.persson@stericsson.com> |
| 10 | * | ||
| 11 | */ | 10 | */ |
| 12 | #include <linux/io.h> | 11 | |
| 12 | #include <linux/module.h> | ||
| 13 | #include <linux/kernel.h> | ||
| 14 | #include <linux/device.h> | ||
| 13 | #include <linux/err.h> | 15 | #include <linux/err.h> |
| 16 | #include <linux/errno.h> | ||
| 17 | #include <linux/io.h> | ||
| 18 | #include <linux/mutex.h> | ||
| 19 | #include <linux/string.h> | ||
| 20 | #include <linux/bug.h> | ||
| 21 | #include <linux/debugfs.h> | ||
| 22 | #include <linux/seq_file.h> | ||
| 14 | #include <mach/u300-regs.h> | 23 | #include <mach/u300-regs.h> |
| 15 | #include <mach/syscon.h> | 24 | #include <mach/syscon.h> |
| 16 | |||
| 17 | #include "padmux.h" | 25 | #include "padmux.h" |
| 18 | 26 | ||
| 19 | /* Set the PAD MUX to route the MMC reader correctly to GPIO0. */ | 27 | static DEFINE_MUTEX(pmx_mutex); |
| 20 | void pmx_set_mission_mode_mmc(void) | 28 | |
| 21 | { | 29 | const u32 pmx_registers[] = { |
| 22 | u16 val; | 30 | (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR), |
| 23 | 31 | (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR), | |
| 24 | val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR); | 32 | (U300_SYSCON_VBASE + U300_SYSCON_PMC2R), |
| 25 | val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK; | 33 | (U300_SYSCON_VBASE + U300_SYSCON_PMC3R), |
| 26 | writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR); | 34 | (U300_SYSCON_VBASE + U300_SYSCON_PMC4R) |
| 27 | val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); | 35 | }; |
| 28 | val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK; | 36 | |
| 29 | val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC; | 37 | /* High level functionality */ |
| 30 | writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); | 38 | |
| 31 | } | 39 | /* Lazy dog: |
| 32 | 40 | * onmask = { | |
| 33 | void pmx_set_mission_mode_spi(void) | 41 | * {"PMC1LR" mask, "PMC1LR" value}, |
| 34 | { | 42 | * {"PMC1HR" mask, "PMC1HR" value}, |
| 35 | u16 val; | 43 | * {"PMC2R" mask, "PMC2R" value}, |
| 36 | 44 | * {"PMC3R" mask, "PMC3R" value}, | |
| 37 | /* Set up padmuxing so the SPI port and its chipselects are active */ | 45 | * {"PMC4R" mask, "PMC4R" value} |
| 38 | val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); | 46 | * } |
| 39 | /* | 47 | */ |
| 40 | * Activate the SPI port (disable the use of these pins for generic | 48 | static struct pmx mmc_setting = { |
| 41 | * GPIO, DSP, AAIF | 49 | .setting = U300_APP_PMX_MMC_SETTING, |
| 42 | */ | 50 | .default_on = false, |
| 43 | val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK; | 51 | .activated = false, |
| 44 | val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI; | 52 | .name = "MMC", |
| 45 | /* | 53 | .onmask = { |
| 46 | * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other | 54 | {U300_SYSCON_PMC1LR_MMCSD_MASK, |
| 47 | * things also) | 55 | U300_SYSCON_PMC1LR_MMCSD_MMCSD}, |
| 48 | */ | 56 | {0, 0}, |
| 49 | val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK; | 57 | {0, 0}, |
| 50 | val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI; | 58 | {0, 0}, |
| 51 | /* | 59 | {U300_SYSCON_PMC4R_APP_MISC_12_MASK, |
| 52 | * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other | 60 | U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO} |
| 53 | * things also) | 61 | }, |
| 54 | */ | 62 | }; |
| 55 | val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK; | 63 | |
| 56 | val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI; | 64 | static struct pmx spi_setting = { |
| 57 | writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); | 65 | .setting = U300_APP_PMX_SPI_SETTING, |
| 66 | .default_on = false, | ||
| 67 | .activated = false, | ||
| 68 | .name = "SPI", | ||
| 69 | .onmask = {{0, 0}, | ||
| 70 | {U300_SYSCON_PMC1HR_APP_SPI_2_MASK | | ||
| 71 | U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK | | ||
| 72 | U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK, | ||
| 73 | U300_SYSCON_PMC1HR_APP_SPI_2_SPI | | ||
| 74 | U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI | | ||
| 75 | U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI}, | ||
| 76 | {0, 0}, | ||
| 77 | {0, 0}, | ||
| 78 | {0, 0} | ||
| 79 | }, | ||
| 80 | }; | ||
| 81 | |||
| 82 | /* Available padmux settings */ | ||
| 83 | static struct pmx *pmx_settings[] = { | ||
| 84 | &mmc_setting, | ||
| 85 | &spi_setting, | ||
| 86 | }; | ||
| 87 | |||
| 88 | static void update_registers(struct pmx *pmx, bool activate) | ||
| 89 | { | ||
| 90 | u16 regval, val, mask; | ||
| 91 | int i; | ||
| 92 | |||
| 93 | for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) { | ||
| 94 | if (activate) | ||
| 95 | val = pmx->onmask[i].val; | ||
| 96 | else | ||
| 97 | val = 0; | ||
| 98 | |||
| 99 | mask = pmx->onmask[i].mask; | ||
| 100 | if (mask != 0) { | ||
| 101 | regval = readw(pmx_registers[i]); | ||
| 102 | regval &= ~mask; | ||
| 103 | regval |= val; | ||
| 104 | writew(regval, pmx_registers[i]); | ||
| 105 | } | ||
| 106 | } | ||
| 107 | } | ||
| 108 | |||
| 109 | struct pmx *pmx_get(struct device *dev, enum pmx_settings setting) | ||
| 110 | { | ||
| 111 | int i; | ||
| 112 | struct pmx *pmx = ERR_PTR(-ENOENT); | ||
| 113 | |||
| 114 | if (dev == NULL) | ||
| 115 | return ERR_PTR(-EINVAL); | ||
| 116 | |||
| 117 | mutex_lock(&pmx_mutex); | ||
| 118 | for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { | ||
| 119 | |||
| 120 | if (setting == pmx_settings[i]->setting) { | ||
| 121 | |||
| 122 | if (pmx_settings[i]->dev != NULL) { | ||
| 123 | WARN(1, "padmux: required setting " | ||
| 124 | "in use by another consumer\n"); | ||
| 125 | } else { | ||
| 126 | pmx = pmx_settings[i]; | ||
| 127 | pmx->dev = dev; | ||
| 128 | dev_dbg(dev, "padmux: setting nr %d is now " | ||
| 129 | "bound to %s and ready to use\n", | ||
| 130 | setting, dev_name(dev)); | ||
| 131 | break; | ||
| 132 | } | ||
| 133 | } | ||
| 134 | } | ||
| 135 | mutex_unlock(&pmx_mutex); | ||
| 136 | |||
| 137 | return pmx; | ||
| 138 | } | ||
| 139 | EXPORT_SYMBOL(pmx_get); | ||
| 140 | |||
| 141 | int pmx_put(struct device *dev, struct pmx *pmx) | ||
| 142 | { | ||
| 143 | int i; | ||
| 144 | int ret = -ENOENT; | ||
| 145 | |||
| 146 | if (pmx == NULL || dev == NULL) | ||
| 147 | return -EINVAL; | ||
| 148 | |||
| 149 | mutex_lock(&pmx_mutex); | ||
| 150 | for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { | ||
| 151 | |||
| 152 | if (pmx->setting == pmx_settings[i]->setting) { | ||
| 153 | |||
| 154 | if (dev != pmx->dev) { | ||
| 155 | WARN(1, "padmux: cannot release handle as " | ||
| 156 | "it is bound to another consumer\n"); | ||
| 157 | ret = -EINVAL; | ||
| 158 | break; | ||
| 159 | } else { | ||
| 160 | pmx_settings[i]->dev = NULL; | ||
| 161 | ret = 0; | ||
| 162 | break; | ||
| 163 | } | ||
| 164 | } | ||
| 165 | } | ||
| 166 | mutex_unlock(&pmx_mutex); | ||
| 167 | |||
| 168 | return ret; | ||
| 169 | } | ||
| 170 | EXPORT_SYMBOL(pmx_put); | ||
| 171 | |||
| 172 | int pmx_activate(struct device *dev, struct pmx *pmx) | ||
| 173 | { | ||
| 174 | int i, j, ret; | ||
| 175 | ret = 0; | ||
| 176 | |||
| 177 | if (pmx == NULL || dev == NULL) | ||
| 178 | return -EINVAL; | ||
| 179 | |||
| 180 | mutex_lock(&pmx_mutex); | ||
| 181 | |||
| 182 | /* Make sure the required bits are not used */ | ||
| 183 | for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { | ||
| 184 | |||
| 185 | if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx) | ||
| 186 | continue; | ||
| 187 | |||
| 188 | for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { | ||
| 189 | |||
| 190 | if (pmx_settings[i]->onmask[j].mask & pmx-> | ||
| 191 | onmask[j].mask) { | ||
| 192 | /* More than one entry on the same bits */ | ||
| 193 | WARN(1, "padmux: cannot activate " | ||
| 194 | "setting. Bit conflict with " | ||
| 195 | "an active setting\n"); | ||
| 196 | |||
| 197 | ret = -EUSERS; | ||
| 198 | goto exit; | ||
| 199 | } | ||
| 200 | } | ||
| 201 | } | ||
| 202 | update_registers(pmx, true); | ||
| 203 | pmx->activated = true; | ||
| 204 | dev_dbg(dev, "padmux: setting nr %d is activated\n", | ||
| 205 | pmx->setting); | ||
| 206 | |||
| 207 | exit: | ||
| 208 | mutex_unlock(&pmx_mutex); | ||
| 209 | return ret; | ||
| 210 | } | ||
| 211 | EXPORT_SYMBOL(pmx_activate); | ||
| 212 | |||
| 213 | int pmx_deactivate(struct device *dev, struct pmx *pmx) | ||
| 214 | { | ||
| 215 | int i; | ||
| 216 | int ret = -ENOENT; | ||
| 217 | |||
| 218 | if (pmx == NULL || dev == NULL) | ||
| 219 | return -EINVAL; | ||
| 220 | |||
| 221 | mutex_lock(&pmx_mutex); | ||
| 222 | for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { | ||
| 223 | |||
| 224 | if (pmx_settings[i]->dev == NULL) | ||
| 225 | continue; | ||
| 226 | |||
| 227 | if (pmx->setting == pmx_settings[i]->setting) { | ||
| 228 | |||
| 229 | if (dev != pmx->dev) { | ||
| 230 | WARN(1, "padmux: cannot deactivate " | ||
| 231 | "pmx setting as it was activated " | ||
| 232 | "by another consumer\n"); | ||
| 233 | |||
| 234 | ret = -EBUSY; | ||
| 235 | continue; | ||
| 236 | } else { | ||
| 237 | update_registers(pmx, false); | ||
| 238 | pmx_settings[i]->dev = NULL; | ||
| 239 | pmx->activated = false; | ||
| 240 | ret = 0; | ||
| 241 | dev_dbg(dev, "padmux: setting nr %d is deactivated", | ||
| 242 | pmx->setting); | ||
| 243 | break; | ||
| 244 | } | ||
| 245 | } | ||
| 246 | } | ||
| 247 | mutex_unlock(&pmx_mutex); | ||
| 248 | |||
| 249 | return ret; | ||
| 250 | } | ||
| 251 | EXPORT_SYMBOL(pmx_deactivate); | ||
| 252 | |||
| 253 | /* | ||
| 254 | * For internal use only. If it is to be exported, | ||
| 255 | * it should be reentrant. Notice that pmx_activate | ||
| 256 | * (i.e. runtime settings) always override default settings. | ||
| 257 | */ | ||
| 258 | static int pmx_set_default(void) | ||
| 259 | { | ||
| 260 | /* Used to identify several entries on the same bits */ | ||
| 261 | u16 modbits[ARRAY_SIZE(pmx_registers)]; | ||
| 262 | |||
| 263 | int i, j; | ||
| 264 | |||
| 265 | memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16)); | ||
| 266 | |||
| 267 | for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { | ||
| 268 | |||
| 269 | if (!pmx_settings[i]->default_on) | ||
| 270 | continue; | ||
| 271 | |||
| 272 | for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { | ||
| 273 | |||
| 274 | /* Make sure there is only one entry on the same bits */ | ||
| 275 | if (modbits[j] & pmx_settings[i]->onmask[j].mask) { | ||
| 276 | BUG(); | ||
| 277 | return -EUSERS; | ||
| 278 | } | ||
| 279 | modbits[j] |= pmx_settings[i]->onmask[j].mask; | ||
| 280 | } | ||
| 281 | update_registers(pmx_settings[i], true); | ||
| 282 | } | ||
| 283 | return 0; | ||
| 58 | } | 284 | } |
| 285 | |||
| 286 | #if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) | ||
| 287 | static int pmx_show(struct seq_file *s, void *data) | ||
| 288 | { | ||
| 289 | int i; | ||
| 290 | seq_printf(s, "-------------------------------------------------\n"); | ||
| 291 | seq_printf(s, "SETTING BOUND TO DEVICE STATE\n"); | ||
| 292 | seq_printf(s, "-------------------------------------------------\n"); | ||
| 293 | mutex_lock(&pmx_mutex); | ||
| 294 | for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { | ||
| 295 | /* Format pmx and device name nicely */ | ||
| 296 | char cdp[33]; | ||
| 297 | int chars; | ||
| 298 | |||
| 299 | chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name); | ||
| 300 | while (chars < 16) { | ||
| 301 | cdp[chars] = ' '; | ||
| 302 | chars++; | ||
| 303 | } | ||
| 304 | chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ? | ||
| 305 | dev_name(pmx_settings[i]->dev) : "N/A"); | ||
| 306 | while (chars < 16) { | ||
| 307 | cdp[chars+16] = ' '; | ||
| 308 | chars++; | ||
| 309 | } | ||
| 310 | cdp[32] = '\0'; | ||
| 311 | |||
| 312 | seq_printf(s, | ||
| 313 | "%s\t%s\n", | ||
| 314 | &cdp[0], | ||
| 315 | pmx_settings[i]->activated ? | ||
| 316 | "ACTIVATED" : "DEACTIVATED" | ||
| 317 | ); | ||
| 318 | |||
| 319 | } | ||
| 320 | mutex_unlock(&pmx_mutex); | ||
| 321 | return 0; | ||
| 322 | } | ||
| 323 | |||
| 324 | static int pmx_open(struct inode *inode, struct file *file) | ||
| 325 | { | ||
| 326 | return single_open(file, pmx_show, NULL); | ||
| 327 | } | ||
| 328 | |||
| 329 | static const struct file_operations pmx_operations = { | ||
| 330 | .owner = THIS_MODULE, | ||
| 331 | .open = pmx_open, | ||
| 332 | .read = seq_read, | ||
| 333 | .llseek = seq_lseek, | ||
| 334 | .release = single_release, | ||
| 335 | }; | ||
| 336 | |||
| 337 | static int __init init_pmx_read_debugfs(void) | ||
| 338 | { | ||
| 339 | /* Expose a simple debugfs interface to view pmx settings */ | ||
| 340 | (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO, | ||
| 341 | NULL, NULL, | ||
| 342 | &pmx_operations); | ||
| 343 | return 0; | ||
| 344 | } | ||
| 345 | |||
| 346 | /* | ||
| 347 | * This needs to come in after the core_initcall(), | ||
| 348 | * because debugfs is not available until | ||
| 349 | * the subsystems come up. | ||
| 350 | */ | ||
| 351 | module_init(init_pmx_read_debugfs); | ||
| 352 | #endif | ||
| 353 | |||
| 354 | static int __init pmx_init(void) | ||
| 355 | { | ||
| 356 | int ret; | ||
| 357 | |||
| 358 | ret = pmx_set_default(); | ||
| 359 | |||
| 360 | if (IS_ERR_VALUE(ret)) | ||
| 361 | pr_crit("padmux: default settings could not be set\n"); | ||
| 362 | |||
| 363 | return 0; | ||
| 364 | } | ||
| 365 | |||
| 366 | /* Should be initialized before consumers */ | ||
| 367 | core_initcall(pmx_init); | ||
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h index 8c2099ac5046..6e8b86064097 100644 --- a/arch/arm/mach-u300/padmux.h +++ b/arch/arm/mach-u300/padmux.h | |||
| @@ -6,14 +6,34 @@ | |||
| 6 | * Copyright (C) 2009 ST-Ericsson AB | 6 | * Copyright (C) 2009 ST-Ericsson AB |
| 7 | * License terms: GNU General Public License (GPL) version 2 | 7 | * License terms: GNU General Public License (GPL) version 2 |
| 8 | * U300 PADMUX API | 8 | * U300 PADMUX API |
| 9 | * Author: Linus Walleij <linus.walleij@stericsson.com> | 9 | * Author: Martin Persson <martin.persson@stericsson.com> |
| 10 | * | ||
| 11 | */ | 10 | */ |
| 12 | 11 | ||
| 13 | #ifndef __MACH_U300_PADMUX_H | 12 | #ifndef __MACH_U300_PADMUX_H |
| 14 | #define __MACH_U300_PADMUX_H | 13 | #define __MACH_U300_PADMUX_H |
| 15 | 14 | ||
| 16 | void pmx_set_mission_mode_mmc(void); | 15 | enum pmx_settings { |
| 17 | void pmx_set_mission_mode_spi(void); | 16 | U300_APP_PMX_MMC_SETTING, |
| 17 | U300_APP_PMX_SPI_SETTING | ||
| 18 | }; | ||
| 19 | |||
| 20 | struct pmx_onmask { | ||
| 21 | u16 mask; /* Mask bits */ | ||
| 22 | u16 val; /* Value when active */ | ||
| 23 | }; | ||
| 24 | |||
| 25 | struct pmx { | ||
| 26 | struct device *dev; | ||
| 27 | enum pmx_settings setting; | ||
| 28 | char *name; | ||
| 29 | bool activated; | ||
| 30 | bool default_on; | ||
| 31 | struct pmx_onmask onmask[]; | ||
| 32 | }; | ||
| 33 | |||
| 34 | struct pmx *pmx_get(struct device *dev, enum pmx_settings setting); | ||
| 35 | int pmx_put(struct device *dev, struct pmx *pmx); | ||
| 36 | int pmx_activate(struct device *dev, struct pmx *pmx); | ||
| 37 | int pmx_deactivate(struct device *dev, struct pmx *pmx); | ||
| 18 | 38 | ||
| 19 | #endif | 39 | #endif |
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c new file mode 100644 index 000000000000..f0e887bea30e --- /dev/null +++ b/arch/arm/mach-u300/spi.c | |||
| @@ -0,0 +1,124 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-u300/spi.c | ||
| 3 | * | ||
| 4 | * Copyright (C) 2009 ST-Ericsson AB | ||
| 5 | * License terms: GNU General Public License (GPL) version 2 | ||
| 6 | * | ||
| 7 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 8 | */ | ||
| 9 | #include <linux/device.h> | ||
| 10 | #include <linux/amba/bus.h> | ||
| 11 | #include <linux/spi/spi.h> | ||
| 12 | #include <linux/amba/pl022.h> | ||
| 13 | #include <linux/err.h> | ||
| 14 | #include "padmux.h" | ||
| 15 | |||
| 16 | /* | ||
| 17 | * The following is for the actual devices on the SSP/SPI bus | ||
| 18 | */ | ||
| 19 | #ifdef CONFIG_MACH_U300_SPIDUMMY | ||
| 20 | static void select_dummy_chip(u32 chipselect) | ||
| 21 | { | ||
| 22 | pr_debug("CORE: %s called with CS=0x%x (%s)\n", | ||
| 23 | __func__, | ||
| 24 | chipselect, | ||
| 25 | chipselect ? "unselect chip" : "select chip"); | ||
| 26 | /* | ||
| 27 | * Here you would write the chip select value to the GPIO pins if | ||
| 28 | * this was a real chip (but this is a loopback dummy). | ||
| 29 | */ | ||
| 30 | } | ||
| 31 | |||
| 32 | struct pl022_config_chip dummy_chip_info = { | ||
| 33 | /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */ | ||
| 34 | .lbm = LOOPBACK_ENABLED, | ||
| 35 | /* | ||
| 36 | * available POLLING_TRANSFER and INTERRUPT_TRANSFER, | ||
| 37 | * DMA_TRANSFER does not work | ||
| 38 | */ | ||
| 39 | .com_mode = INTERRUPT_TRANSFER, | ||
| 40 | .iface = SSP_INTERFACE_MOTOROLA_SPI, | ||
| 41 | /* We can only act as master but SSP_SLAVE is possible in theory */ | ||
| 42 | .hierarchy = SSP_MASTER, | ||
| 43 | /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ | ||
| 44 | .slave_tx_disable = 0, | ||
| 45 | /* LSB first */ | ||
| 46 | .endian_tx = SSP_TX_LSB, | ||
| 47 | .endian_rx = SSP_RX_LSB, | ||
| 48 | .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */ | ||
| 49 | .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, | ||
| 50 | .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, | ||
| 51 | .clk_phase = SSP_CLK_SECOND_EDGE, | ||
| 52 | .clk_pol = SSP_CLK_POL_IDLE_LOW, | ||
| 53 | .ctrl_len = SSP_BITS_12, | ||
| 54 | .wait_state = SSP_MWIRE_WAIT_ZERO, | ||
| 55 | .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, | ||
| 56 | /* | ||
| 57 | * This is where you insert a call to a function to enable CS | ||
| 58 | * (usually GPIO) for a certain chip. | ||
| 59 | */ | ||
| 60 | .cs_control = select_dummy_chip, | ||
| 61 | }; | ||
| 62 | #endif | ||
| 63 | |||
| 64 | static struct spi_board_info u300_spi_devices[] = { | ||
| 65 | #ifdef CONFIG_MACH_U300_SPIDUMMY | ||
| 66 | { | ||
| 67 | /* A dummy chip used for loopback tests */ | ||
| 68 | .modalias = "spi-dummy", | ||
| 69 | /* Really dummy, pass in additional chip config here */ | ||
| 70 | .platform_data = NULL, | ||
| 71 | /* This defines how the controller shall handle the device */ | ||
| 72 | .controller_data = &dummy_chip_info, | ||
| 73 | /* .irq - no external IRQ routed from this device */ | ||
| 74 | .max_speed_hz = 1000000, | ||
| 75 | .bus_num = 0, /* Only one bus on this chip */ | ||
| 76 | .chip_select = 0, | ||
| 77 | /* Means SPI_CS_HIGH, change if e.g low CS */ | ||
| 78 | .mode = 0, | ||
| 79 | }, | ||
| 80 | #endif | ||
| 81 | }; | ||
| 82 | |||
| 83 | static struct pl022_ssp_controller ssp_platform_data = { | ||
| 84 | /* If you have several SPI buses this varies, we have only bus 0 */ | ||
| 85 | .bus_id = 0, | ||
| 86 | /* Set this to 1 when we think we got DMA working */ | ||
| 87 | .enable_dma = 0, | ||
| 88 | /* | ||
| 89 | * On the APP CPU GPIO 4, 5 and 6 are connected as generic | ||
| 90 | * chip selects for SPI. (Same on U330, U335 and U365.) | ||
| 91 | * TODO: make sure the GPIO driver can select these properly | ||
| 92 | * and do padmuxing accordingly too. | ||
| 93 | */ | ||
| 94 | .num_chipselect = 3, | ||
| 95 | }; | ||
| 96 | |||
| 97 | |||
| 98 | void __init u300_spi_init(struct amba_device *adev) | ||
| 99 | { | ||
| 100 | struct pmx *pmx; | ||
| 101 | |||
| 102 | adev->dev.platform_data = &ssp_platform_data; | ||
| 103 | /* | ||
| 104 | * Setup padmuxing for SPI. Since this must always be | ||
| 105 | * compiled into the kernel, pmx is never released. | ||
| 106 | */ | ||
| 107 | pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING); | ||
| 108 | |||
| 109 | if (IS_ERR(pmx)) | ||
| 110 | dev_warn(&adev->dev, "Could not get padmux handle\n"); | ||
| 111 | else { | ||
| 112 | int ret; | ||
| 113 | |||
| 114 | ret = pmx_activate(&adev->dev, pmx); | ||
| 115 | if (IS_ERR_VALUE(ret)) | ||
| 116 | dev_warn(&adev->dev, "Could not activate padmuxing\n"); | ||
| 117 | } | ||
| 118 | |||
| 119 | } | ||
| 120 | void __init u300_spi_register_board_devices(void) | ||
| 121 | { | ||
| 122 | /* Register any SPI devices */ | ||
| 123 | spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices)); | ||
| 124 | } | ||
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h new file mode 100644 index 000000000000..bd3d867e240f --- /dev/null +++ b/arch/arm/mach-u300/spi.h | |||
| @@ -0,0 +1,26 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-u300/spi.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 2009 ST-Ericsson AB | ||
| 5 | * License terms: GNU General Public License (GPL) version 2 | ||
| 6 | * | ||
| 7 | * Author: Linus Walleij <linus.walleij@stericsson.com> | ||
| 8 | */ | ||
| 9 | #ifndef SPI_H | ||
| 10 | #define SPI_H | ||
| 11 | #include <linux/amba/bus.h> | ||
| 12 | |||
| 13 | #ifdef CONFIG_SPI_PL022 | ||
| 14 | void __init u300_spi_init(struct amba_device *adev); | ||
| 15 | void __init u300_spi_register_board_devices(void); | ||
| 16 | #else | ||
| 17 | /* Compile out SPI support if PL022 is not selected */ | ||
| 18 | static inline void __init u300_spi_init(struct amba_device *adev) | ||
| 19 | { | ||
| 20 | } | ||
| 21 | static inline void __init u300_spi_register_board_devices(void) | ||
| 22 | { | ||
| 23 | } | ||
| 24 | #endif | ||
| 25 | |||
| 26 | #endif | ||
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index cce53204880e..26d26f5100fe 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c | |||
| @@ -346,6 +346,21 @@ static struct clocksource clocksource_u300_1mhz = { | |||
| 346 | .flags = CLOCK_SOURCE_IS_CONTINUOUS, | 346 | .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| 347 | }; | 347 | }; |
| 348 | 348 | ||
| 349 | /* | ||
| 350 | * Override the global weak sched_clock symbol with this | ||
| 351 | * local implementation which uses the clocksource to get some | ||
| 352 | * better resolution when scheduling the kernel. We accept that | ||
| 353 | * this wraps around for now, since it is just a relative time | ||
| 354 | * stamp. (Inspired by OMAP implementation.) | ||
| 355 | */ | ||
| 356 | unsigned long long notrace sched_clock(void) | ||
| 357 | { | ||
| 358 | return clocksource_cyc2ns(clocksource_u300_1mhz.read( | ||
| 359 | &clocksource_u300_1mhz), | ||
| 360 | clocksource_u300_1mhz.mult, | ||
| 361 | clocksource_u300_1mhz.shift); | ||
| 362 | } | ||
| 363 | |||
| 349 | 364 | ||
| 350 | /* | 365 | /* |
| 351 | * This sets up the system timers, clock source and clock event. | 366 | * This sets up the system timers, clock source and clock event. |
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 975eae41ee66..e13be7c444ca 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c | |||
| @@ -27,6 +27,7 @@ | |||
| 27 | #include <linux/amba/bus.h> | 27 | #include <linux/amba/bus.h> |
| 28 | #include <linux/amba/clcd.h> | 28 | #include <linux/amba/clcd.h> |
| 29 | #include <linux/amba/pl061.h> | 29 | #include <linux/amba/pl061.h> |
| 30 | #include <linux/amba/mmci.h> | ||
| 30 | #include <linux/clocksource.h> | 31 | #include <linux/clocksource.h> |
| 31 | #include <linux/clockchips.h> | 32 | #include <linux/clockchips.h> |
| 32 | #include <linux/cnt32_to_63.h> | 33 | #include <linux/cnt32_to_63.h> |
| @@ -47,7 +48,6 @@ | |||
| 47 | #include <asm/mach/irq.h> | 48 | #include <asm/mach/irq.h> |
| 48 | #include <asm/mach/time.h> | 49 | #include <asm/mach/time.h> |
| 49 | #include <asm/mach/map.h> | 50 | #include <asm/mach/map.h> |
| 50 | #include <asm/mach/mmc.h> | ||
| 51 | 51 | ||
| 52 | #include "core.h" | 52 | #include "core.h" |
| 53 | #include "clock.h" | 53 | #include "clock.h" |
| @@ -369,7 +369,7 @@ unsigned int mmc_status(struct device *dev) | |||
| 369 | return readl(VERSATILE_SYSMCI) & mask; | 369 | return readl(VERSATILE_SYSMCI) & mask; |
| 370 | } | 370 | } |
| 371 | 371 | ||
| 372 | static struct mmc_platform_data mmc0_plat_data = { | 372 | static struct mmci_platform_data mmc0_plat_data = { |
| 373 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 373 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 374 | .status = mmc_status, | 374 | .status = mmc_status, |
| 375 | .gpio_wp = -1, | 375 | .gpio_wp = -1, |
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 9af8d8154df5..239cd30fc4f5 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c | |||
| @@ -24,6 +24,7 @@ | |||
| 24 | #include <linux/sysdev.h> | 24 | #include <linux/sysdev.h> |
| 25 | #include <linux/amba/bus.h> | 25 | #include <linux/amba/bus.h> |
| 26 | #include <linux/amba/pl061.h> | 26 | #include <linux/amba/pl061.h> |
| 27 | #include <linux/amba/mmci.h> | ||
| 27 | #include <linux/io.h> | 28 | #include <linux/io.h> |
| 28 | 29 | ||
| 29 | #include <mach/hardware.h> | 30 | #include <mach/hardware.h> |
| @@ -31,7 +32,6 @@ | |||
| 31 | #include <asm/mach-types.h> | 32 | #include <asm/mach-types.h> |
| 32 | 33 | ||
| 33 | #include <asm/mach/arch.h> | 34 | #include <asm/mach/arch.h> |
| 34 | #include <asm/mach/mmc.h> | ||
| 35 | 35 | ||
| 36 | #include "core.h" | 36 | #include "core.h" |
| 37 | 37 | ||
| @@ -41,7 +41,7 @@ | |||
| 41 | #define IRQ_MMCI1A IRQ_SIC_MMCI1A | 41 | #define IRQ_MMCI1A IRQ_SIC_MMCI1A |
| 42 | #endif | 42 | #endif |
| 43 | 43 | ||
| 44 | static struct mmc_platform_data mmc1_plat_data = { | 44 | static struct mmci_platform_data mmc1_plat_data = { |
| 45 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | 45 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| 46 | .status = mmc_status, | 46 | .status = mmc_status, |
| 47 | .gpio_wp = -1, | 47 | .gpio_wp = -1, |
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5fe595aeba69..8d43e58f9244 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig | |||
| @@ -771,3 +771,8 @@ config CACHE_XSC3L2 | |||
| 771 | select OUTER_CACHE | 771 | select OUTER_CACHE |
| 772 | help | 772 | help |
| 773 | This option enables the L2 cache on XScale3. | 773 | This option enables the L2 cache on XScale3. |
| 774 | |||
| 775 | config ARM_L1_CACHE_SHIFT | ||
| 776 | int | ||
| 777 | default 6 if ARCH_OMAP3 | ||
| 778 | default 5 | ||
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index cc8829d7e116..379f78556055 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c | |||
| @@ -25,6 +25,19 @@ | |||
| 25 | 25 | ||
| 26 | #include "fault.h" | 26 | #include "fault.h" |
| 27 | 27 | ||
| 28 | /* | ||
| 29 | * Fault status register encodings. We steal bit 31 for our own purposes. | ||
| 30 | */ | ||
| 31 | #define FSR_LNX_PF (1 << 31) | ||
| 32 | #define FSR_WRITE (1 << 11) | ||
| 33 | #define FSR_FS4 (1 << 10) | ||
| 34 | #define FSR_FS3_0 (15) | ||
| 35 | |||
| 36 | static inline int fsr_fs(unsigned int fsr) | ||
| 37 | { | ||
| 38 | return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6; | ||
| 39 | } | ||
| 40 | |||
| 28 | #ifdef CONFIG_MMU | 41 | #ifdef CONFIG_MMU |
| 29 | 42 | ||
| 30 | #ifdef CONFIG_KPROBES | 43 | #ifdef CONFIG_KPROBES |
| @@ -182,18 +195,35 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | |||
| 182 | #define VM_FAULT_BADMAP 0x010000 | 195 | #define VM_FAULT_BADMAP 0x010000 |
| 183 | #define VM_FAULT_BADACCESS 0x020000 | 196 | #define VM_FAULT_BADACCESS 0x020000 |
| 184 | 197 | ||
| 185 | static int | 198 | /* |
| 199 | * Check that the permissions on the VMA allow for the fault which occurred. | ||
| 200 | * If we encountered a write fault, we must have write permission, otherwise | ||
| 201 | * we allow any permission. | ||
| 202 | */ | ||
| 203 | static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) | ||
| 204 | { | ||
| 205 | unsigned int mask = VM_READ | VM_WRITE | VM_EXEC; | ||
| 206 | |||
| 207 | if (fsr & FSR_WRITE) | ||
| 208 | mask = VM_WRITE; | ||
| 209 | if (fsr & FSR_LNX_PF) | ||
| 210 | mask = VM_EXEC; | ||
| 211 | |||
| 212 | return vma->vm_flags & mask ? false : true; | ||
| 213 | } | ||
| 214 | |||
| 215 | static int __kprobes | ||
| 186 | __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, | 216 | __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, |
| 187 | struct task_struct *tsk) | 217 | struct task_struct *tsk) |
| 188 | { | 218 | { |
| 189 | struct vm_area_struct *vma; | 219 | struct vm_area_struct *vma; |
| 190 | int fault, mask; | 220 | int fault; |
| 191 | 221 | ||
| 192 | vma = find_vma(mm, addr); | 222 | vma = find_vma(mm, addr); |
| 193 | fault = VM_FAULT_BADMAP; | 223 | fault = VM_FAULT_BADMAP; |
| 194 | if (!vma) | 224 | if (unlikely(!vma)) |
| 195 | goto out; | 225 | goto out; |
| 196 | if (vma->vm_start > addr) | 226 | if (unlikely(vma->vm_start > addr)) |
| 197 | goto check_stack; | 227 | goto check_stack; |
| 198 | 228 | ||
| 199 | /* | 229 | /* |
| @@ -201,47 +231,24 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, | |||
| 201 | * memory access, so we can handle it. | 231 | * memory access, so we can handle it. |
| 202 | */ | 232 | */ |
| 203 | good_area: | 233 | good_area: |
| 204 | if (fsr & (1 << 11)) /* write? */ | 234 | if (access_error(fsr, vma)) { |
| 205 | mask = VM_WRITE; | 235 | fault = VM_FAULT_BADACCESS; |
| 206 | else | ||
| 207 | mask = VM_READ|VM_EXEC|VM_WRITE; | ||
| 208 | |||
| 209 | fault = VM_FAULT_BADACCESS; | ||
| 210 | if (!(vma->vm_flags & mask)) | ||
| 211 | goto out; | 236 | goto out; |
| 237 | } | ||
| 212 | 238 | ||
| 213 | /* | 239 | /* |
| 214 | * If for any reason at all we couldn't handle | 240 | * If for any reason at all we couldn't handle the fault, make |
| 215 | * the fault, make sure we exit gracefully rather | 241 | * sure we exit gracefully rather than endlessly redo the fault. |
| 216 | * than endlessly redo the fault. | ||
| 217 | */ | 242 | */ |
| 218 | survive: | 243 | fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0); |
| 219 | fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0); | 244 | if (unlikely(fault & VM_FAULT_ERROR)) |
| 220 | if (unlikely(fault & VM_FAULT_ERROR)) { | 245 | return fault; |
| 221 | if (fault & VM_FAULT_OOM) | ||
| 222 | goto out_of_memory; | ||
| 223 | else if (fault & VM_FAULT_SIGBUS) | ||
| 224 | return fault; | ||
| 225 | BUG(); | ||
| 226 | } | ||
| 227 | if (fault & VM_FAULT_MAJOR) | 246 | if (fault & VM_FAULT_MAJOR) |
| 228 | tsk->maj_flt++; | 247 | tsk->maj_flt++; |
| 229 | else | 248 | else |
| 230 | tsk->min_flt++; | 249 | tsk->min_flt++; |
| 231 | return fault; | 250 | return fault; |
| 232 | 251 | ||
| 233 | out_of_memory: | ||
| 234 | if (!is_global_init(tsk)) | ||
| 235 | goto out; | ||
| 236 | |||
| 237 | /* | ||
| 238 | * If we are out of memory for pid1, sleep for a while and retry | ||
| 239 | */ | ||
| 240 | up_read(&mm->mmap_sem); | ||
| 241 | yield(); | ||
| 242 | down_read(&mm->mmap_sem); | ||
| 243 | goto survive; | ||
| 244 | |||
| 245 | check_stack: | 252 | check_stack: |
| 246 | if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) | 253 | if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) |
| 247 | goto good_area; | 254 | goto good_area; |
| @@ -278,6 +285,13 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | |||
| 278 | if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) | 285 | if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) |
| 279 | goto no_context; | 286 | goto no_context; |
| 280 | down_read(&mm->mmap_sem); | 287 | down_read(&mm->mmap_sem); |
| 288 | } else { | ||
| 289 | /* | ||
| 290 | * The above down_read_trylock() might have succeeded in | ||
| 291 | * which case, we'll have missed the might_sleep() from | ||
| 292 | * down_read() | ||
| 293 | */ | ||
| 294 | might_sleep(); | ||
| 281 | } | 295 | } |
| 282 | 296 | ||
| 283 | fault = __do_page_fault(mm, addr, fsr, tsk); | 297 | fault = __do_page_fault(mm, addr, fsr, tsk); |
| @@ -289,6 +303,16 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | |||
| 289 | if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) | 303 | if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) |
| 290 | return 0; | 304 | return 0; |
| 291 | 305 | ||
| 306 | if (fault & VM_FAULT_OOM) { | ||
| 307 | /* | ||
| 308 | * We ran out of memory, call the OOM killer, and return to | ||
| 309 | * userspace (which will retry the fault, or kill us if we | ||
| 310 | * got oom-killed) | ||
| 311 | */ | ||
| 312 | pagefault_out_of_memory(); | ||
| 313 | return 0; | ||
| 314 | } | ||
| 315 | |||
| 292 | /* | 316 | /* |
| 293 | * If we are in kernel mode at this point, we | 317 | * If we are in kernel mode at this point, we |
| 294 | * have no context to handle this fault with. | 318 | * have no context to handle this fault with. |
| @@ -296,16 +320,6 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | |||
| 296 | if (!user_mode(regs)) | 320 | if (!user_mode(regs)) |
| 297 | goto no_context; | 321 | goto no_context; |
| 298 | 322 | ||
| 299 | if (fault & VM_FAULT_OOM) { | ||
| 300 | /* | ||
| 301 | * We ran out of memory, or some other thing | ||
| 302 | * happened to us that made us unable to handle | ||
| 303 | * the page fault gracefully. | ||
| 304 | */ | ||
| 305 | printk("VM: killing process %s\n", tsk->comm); | ||
| 306 | do_group_exit(SIGKILL); | ||
| 307 | return 0; | ||
| 308 | } | ||
| 309 | if (fault & VM_FAULT_SIGBUS) { | 323 | if (fault & VM_FAULT_SIGBUS) { |
| 310 | /* | 324 | /* |
| 311 | * We had some memory, but were unable to | 325 | * We had some memory, but were unable to |
| @@ -489,10 +503,10 @@ hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *) | |||
| 489 | asmlinkage void __exception | 503 | asmlinkage void __exception |
| 490 | do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | 504 | do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) |
| 491 | { | 505 | { |
| 492 | const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6); | 506 | const struct fsr_info *inf = fsr_info + fsr_fs(fsr); |
| 493 | struct siginfo info; | 507 | struct siginfo info; |
| 494 | 508 | ||
| 495 | if (!inf->fn(addr, fsr, regs)) | 509 | if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs)) |
| 496 | return; | 510 | return; |
| 497 | 511 | ||
| 498 | printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", | 512 | printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", |
| @@ -508,6 +522,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | |||
| 508 | asmlinkage void __exception | 522 | asmlinkage void __exception |
| 509 | do_PrefetchAbort(unsigned long addr, struct pt_regs *regs) | 523 | do_PrefetchAbort(unsigned long addr, struct pt_regs *regs) |
| 510 | { | 524 | { |
| 511 | do_translation_fault(addr, 0, regs); | 525 | do_translation_fault(addr, FSR_LNX_PF, regs); |
| 512 | } | 526 | } |
| 513 | 527 | ||
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index f982606d7bf9..877c492f8e10 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c | |||
| @@ -613,6 +613,14 @@ void __init mem_init(void) | |||
| 613 | 613 | ||
| 614 | void free_initmem(void) | 614 | void free_initmem(void) |
| 615 | { | 615 | { |
| 616 | #ifdef CONFIG_HAVE_TCM | ||
| 617 | extern char *__tcm_start, *__tcm_end; | ||
| 618 | |||
| 619 | totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)), | ||
| 620 | __phys_to_pfn(__pa(__tcm_end)), | ||
| 621 | "TCM link"); | ||
| 622 | #endif | ||
| 623 | |||
| 616 | if (!machine_is_integrator() && !machine_is_cintegrator()) | 624 | if (!machine_is_integrator() && !machine_is_cintegrator()) |
| 617 | totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), | 625 | totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), |
| 618 | __phys_to_pfn(__pa(__init_end)), | 626 | __phys_to_pfn(__pa(__init_end)), |
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 70aeee407f7d..2975798d411f 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c | |||
| @@ -17,22 +17,266 @@ | |||
| 17 | #include <linux/kernel.h> | 17 | #include <linux/kernel.h> |
| 18 | #include <linux/interrupt.h> | 18 | #include <linux/interrupt.h> |
| 19 | #include <linux/errno.h> | 19 | #include <linux/errno.h> |
| 20 | #include <linux/dma-mapping.h> | ||
| 20 | 21 | ||
| 21 | #include <asm/system.h> | 22 | #include <asm/system.h> |
| 22 | #include <asm/irq.h> | 23 | #include <asm/irq.h> |
| 24 | #include <asm/memory.h> | ||
| 23 | #include <mach/hardware.h> | 25 | #include <mach/hardware.h> |
| 24 | #include <mach/dma.h> | 26 | #include <mach/dma.h> |
| 25 | 27 | ||
| 28 | #define DMA_DEBUG_NAME "pxa_dma" | ||
| 29 | #define DMA_MAX_REQUESTERS 64 | ||
| 30 | |||
| 26 | struct dma_channel { | 31 | struct dma_channel { |
| 27 | char *name; | 32 | char *name; |
| 28 | pxa_dma_prio prio; | 33 | pxa_dma_prio prio; |
| 29 | void (*irq_handler)(int, void *); | 34 | void (*irq_handler)(int, void *); |
| 30 | void *data; | 35 | void *data; |
| 36 | spinlock_t lock; | ||
| 31 | }; | 37 | }; |
| 32 | 38 | ||
| 33 | static struct dma_channel *dma_channels; | 39 | static struct dma_channel *dma_channels; |
| 34 | static int num_dma_channels; | 40 | static int num_dma_channels; |
| 35 | 41 | ||
| 42 | /* | ||
| 43 | * Debug fs | ||
| 44 | */ | ||
| 45 | #ifdef CONFIG_DEBUG_FS | ||
| 46 | #include <linux/debugfs.h> | ||
| 47 | #include <linux/uaccess.h> | ||
| 48 | #include <linux/seq_file.h> | ||
| 49 | |||
| 50 | static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan; | ||
| 51 | |||
| 52 | static int dbg_show_requester_chan(struct seq_file *s, void *p) | ||
| 53 | { | ||
| 54 | int pos = 0; | ||
| 55 | int chan = (int)s->private; | ||
| 56 | int i; | ||
| 57 | u32 drcmr; | ||
| 58 | |||
| 59 | pos += seq_printf(s, "DMA channel %d requesters list :\n", chan); | ||
| 60 | for (i = 0; i < DMA_MAX_REQUESTERS; i++) { | ||
| 61 | drcmr = DRCMR(i); | ||
| 62 | if ((drcmr & DRCMR_CHLNUM) == chan) | ||
| 63 | pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i, | ||
| 64 | !!(drcmr & DRCMR_MAPVLD)); | ||
| 65 | } | ||
| 66 | return pos; | ||
| 67 | } | ||
| 68 | |||
| 69 | static inline int dbg_burst_from_dcmd(u32 dcmd) | ||
| 70 | { | ||
| 71 | int burst = (dcmd >> 16) & 0x3; | ||
| 72 | |||
| 73 | return burst ? 4 << burst : 0; | ||
| 74 | } | ||
| 75 | |||
| 76 | static int is_phys_valid(unsigned long addr) | ||
| 77 | { | ||
| 78 | return pfn_valid(__phys_to_pfn(addr)); | ||
| 79 | } | ||
| 80 | |||
| 81 | #define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "") | ||
| 82 | #define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "") | ||
| 83 | |||
| 84 | static int dbg_show_descriptors(struct seq_file *s, void *p) | ||
| 85 | { | ||
| 86 | int pos = 0; | ||
| 87 | int chan = (int)s->private; | ||
| 88 | int i, max_show = 20, burst, width; | ||
| 89 | u32 dcmd; | ||
| 90 | unsigned long phys_desc; | ||
| 91 | struct pxa_dma_desc *desc; | ||
| 92 | unsigned long flags; | ||
| 93 | |||
| 94 | spin_lock_irqsave(&dma_channels[chan].lock, flags); | ||
| 95 | phys_desc = DDADR(chan); | ||
| 96 | |||
| 97 | pos += seq_printf(s, "DMA channel %d descriptors :\n", chan); | ||
| 98 | pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0); | ||
| 99 | for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) { | ||
| 100 | desc = phys_to_virt(phys_desc); | ||
| 101 | dcmd = desc->dcmd; | ||
| 102 | burst = dbg_burst_from_dcmd(dcmd); | ||
| 103 | width = (1 << ((dcmd >> 14) & 0x3)) >> 1; | ||
| 104 | |||
| 105 | pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n", | ||
| 106 | i, phys_desc, desc); | ||
| 107 | pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr); | ||
| 108 | pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr); | ||
| 109 | pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr); | ||
| 110 | pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d" | ||
| 111 | " width=%d len=%d)\n", | ||
| 112 | dcmd, | ||
| 113 | DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR), | ||
| 114 | DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG), | ||
| 115 | DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN), | ||
| 116 | DCMD_STR(ENDIAN), burst, width, | ||
| 117 | dcmd & DCMD_LENGTH); | ||
| 118 | phys_desc = desc->ddadr; | ||
| 119 | } | ||
| 120 | if (i == max_show) | ||
| 121 | pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n", | ||
| 122 | i, phys_desc); | ||
| 123 | else | ||
| 124 | pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n", | ||
| 125 | i, phys_desc, phys_desc == DDADR_STOP ? | ||
| 126 | "DDADR_STOP" : "invalid"); | ||
| 127 | |||
| 128 | spin_unlock_irqrestore(&dma_channels[chan].lock, flags); | ||
| 129 | return pos; | ||
| 130 | } | ||
| 131 | |||
| 132 | static int dbg_show_chan_state(struct seq_file *s, void *p) | ||
| 133 | { | ||
| 134 | int pos = 0; | ||
| 135 | int chan = (int)s->private; | ||
| 136 | u32 dcsr, dcmd; | ||
| 137 | int burst, width; | ||
| 138 | static char *str_prio[] = { "high", "normal", "low" }; | ||
| 139 | |||
| 140 | dcsr = DCSR(chan); | ||
| 141 | dcmd = DCMD(chan); | ||
| 142 | burst = dbg_burst_from_dcmd(dcmd); | ||
| 143 | width = (1 << ((dcmd >> 14) & 0x3)) >> 1; | ||
| 144 | |||
| 145 | pos += seq_printf(s, "DMA channel %d\n", chan); | ||
| 146 | pos += seq_printf(s, "\tPriority : %s\n", | ||
| 147 | str_prio[dma_channels[chan].prio]); | ||
| 148 | pos += seq_printf(s, "\tUnaligned transfer bit: %s\n", | ||
| 149 | DALGN & (1 << chan) ? "yes" : "no"); | ||
| 150 | pos += seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n", | ||
| 151 | dcsr, DCSR_STR(RUN), DCSR_STR(NODESC), | ||
| 152 | DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN), | ||
| 153 | DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN), | ||
| 154 | DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST), | ||
| 155 | DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND), | ||
| 156 | DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR), | ||
| 157 | DCSR_STR(STARTINTR), DCSR_STR(BUSERR)); | ||
| 158 | |||
| 159 | pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d" | ||
| 160 | " len=%d)\n", | ||
| 161 | dcmd, | ||
| 162 | DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR), | ||
| 163 | DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG), | ||
| 164 | DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN), | ||
| 165 | DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH); | ||
| 166 | pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan)); | ||
| 167 | pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan)); | ||
| 168 | pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan)); | ||
| 169 | return pos; | ||
| 170 | } | ||
| 171 | |||
| 172 | static int dbg_show_state(struct seq_file *s, void *p) | ||
| 173 | { | ||
| 174 | int pos = 0; | ||
| 175 | |||
| 176 | /* basic device status */ | ||
| 177 | pos += seq_printf(s, "DMA engine status\n"); | ||
| 178 | pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels); | ||
| 179 | |||
| 180 | return pos; | ||
| 181 | } | ||
| 182 | |||
| 183 | #define DBGFS_FUNC_DECL(name) \ | ||
| 184 | static int dbg_open_##name(struct inode *inode, struct file *file) \ | ||
| 185 | { \ | ||
| 186 | return single_open(file, dbg_show_##name, inode->i_private); \ | ||
| 187 | } \ | ||
| 188 | static const struct file_operations dbg_fops_##name = { \ | ||
| 189 | .owner = THIS_MODULE, \ | ||
| 190 | .open = dbg_open_##name, \ | ||
| 191 | .llseek = seq_lseek, \ | ||
| 192 | .read = seq_read, \ | ||
| 193 | .release = single_release, \ | ||
| 194 | } | ||
| 195 | |||
| 196 | DBGFS_FUNC_DECL(state); | ||
| 197 | DBGFS_FUNC_DECL(chan_state); | ||
| 198 | DBGFS_FUNC_DECL(descriptors); | ||
| 199 | DBGFS_FUNC_DECL(requester_chan); | ||
| 200 | |||
| 201 | static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir) | ||
| 202 | { | ||
| 203 | char chan_name[11]; | ||
| 204 | struct dentry *chan, *chan_state = NULL, *chan_descr = NULL; | ||
| 205 | struct dentry *chan_reqs = NULL; | ||
| 206 | void *dt; | ||
| 207 | |||
| 208 | scnprintf(chan_name, sizeof(chan_name), "%d", ch); | ||
| 209 | chan = debugfs_create_dir(chan_name, chandir); | ||
| 210 | dt = (void *)ch; | ||
| 211 | |||
| 212 | if (chan) | ||
| 213 | chan_state = debugfs_create_file("state", 0400, chan, dt, | ||
| 214 | &dbg_fops_chan_state); | ||
| 215 | if (chan_state) | ||
| 216 | chan_descr = debugfs_create_file("descriptors", 0400, chan, dt, | ||
| 217 | &dbg_fops_descriptors); | ||
| 218 | if (chan_descr) | ||
| 219 | chan_reqs = debugfs_create_file("requesters", 0400, chan, dt, | ||
| 220 | &dbg_fops_requester_chan); | ||
| 221 | if (!chan_reqs) | ||
| 222 | goto err_state; | ||
| 223 | |||
| 224 | return chan; | ||
| 225 | |||
| 226 | err_state: | ||
| 227 | debugfs_remove_recursive(chan); | ||
| 228 | return NULL; | ||
| 229 | } | ||
| 230 | |||
| 231 | static void pxa_dma_init_debugfs(void) | ||
| 232 | { | ||
| 233 | int i; | ||
| 234 | struct dentry *chandir; | ||
| 235 | |||
| 236 | dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL); | ||
| 237 | if (IS_ERR(dbgfs_root) || !dbgfs_root) | ||
| 238 | goto err_root; | ||
| 239 | |||
| 240 | dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL, | ||
| 241 | &dbg_fops_state); | ||
| 242 | if (!dbgfs_state) | ||
| 243 | goto err_state; | ||
| 244 | |||
| 245 | dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels, | ||
| 246 | GFP_KERNEL); | ||
| 247 | if (!dbgfs_state) | ||
| 248 | goto err_alloc; | ||
| 249 | |||
| 250 | chandir = debugfs_create_dir("channels", dbgfs_root); | ||
| 251 | if (!chandir) | ||
| 252 | goto err_chandir; | ||
| 253 | |||
| 254 | for (i = 0; i < num_dma_channels; i++) { | ||
| 255 | dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir); | ||
| 256 | if (!dbgfs_chan[i]) | ||
| 257 | goto err_chans; | ||
| 258 | } | ||
| 259 | |||
| 260 | return; | ||
| 261 | err_chans: | ||
| 262 | err_chandir: | ||
| 263 | kfree(dbgfs_chan); | ||
| 264 | err_alloc: | ||
| 265 | err_state: | ||
| 266 | debugfs_remove_recursive(dbgfs_root); | ||
| 267 | err_root: | ||
| 268 | pr_err("pxa_dma: debugfs is not available\n"); | ||
| 269 | } | ||
| 270 | |||
| 271 | static void __exit pxa_dma_cleanup_debugfs(void) | ||
| 272 | { | ||
| 273 | debugfs_remove_recursive(dbgfs_root); | ||
| 274 | } | ||
| 275 | #else | ||
| 276 | static inline void pxa_dma_init_debugfs(void) {} | ||
| 277 | static inline void pxa_dma_cleanup_debugfs(void) {} | ||
| 278 | #endif | ||
| 279 | |||
| 36 | int pxa_request_dma (char *name, pxa_dma_prio prio, | 280 | int pxa_request_dma (char *name, pxa_dma_prio prio, |
| 37 | void (*irq_handler)(int, void *), | 281 | void (*irq_handler)(int, void *), |
| 38 | void *data) | 282 | void *data) |
| @@ -71,6 +315,7 @@ int pxa_request_dma (char *name, pxa_dma_prio prio, | |||
| 71 | local_irq_restore(flags); | 315 | local_irq_restore(flags); |
| 72 | return i; | 316 | return i; |
| 73 | } | 317 | } |
| 318 | EXPORT_SYMBOL(pxa_request_dma); | ||
| 74 | 319 | ||
| 75 | void pxa_free_dma (int dma_ch) | 320 | void pxa_free_dma (int dma_ch) |
| 76 | { | 321 | { |
| @@ -88,24 +333,26 @@ void pxa_free_dma (int dma_ch) | |||
| 88 | dma_channels[dma_ch].name = NULL; | 333 | dma_channels[dma_ch].name = NULL; |
| 89 | local_irq_restore(flags); | 334 | local_irq_restore(flags); |
| 90 | } | 335 | } |
| 336 | EXPORT_SYMBOL(pxa_free_dma); | ||
| 91 | 337 | ||
| 92 | static irqreturn_t dma_irq_handler(int irq, void *dev_id) | 338 | static irqreturn_t dma_irq_handler(int irq, void *dev_id) |
| 93 | { | 339 | { |
| 94 | int i, dint = DINT; | 340 | int i, dint = DINT; |
| 341 | struct dma_channel *channel; | ||
| 95 | 342 | ||
| 96 | for (i = 0; i < num_dma_channels; i++) { | 343 | while (dint) { |
| 97 | if (dint & (1 << i)) { | 344 | i = __ffs(dint); |
| 98 | struct dma_channel *channel = &dma_channels[i]; | 345 | dint &= (dint - 1); |
| 99 | if (channel->name && channel->irq_handler) { | 346 | channel = &dma_channels[i]; |
| 100 | channel->irq_handler(i, channel->data); | 347 | if (channel->name && channel->irq_handler) { |
| 101 | } else { | 348 | channel->irq_handler(i, channel->data); |
| 102 | /* | 349 | } else { |
| 103 | * IRQ for an unregistered DMA channel: | 350 | /* |
| 104 | * let's clear the interrupts and disable it. | 351 | * IRQ for an unregistered DMA channel: |
| 105 | */ | 352 | * let's clear the interrupts and disable it. |
| 106 | printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i); | 353 | */ |
| 107 | DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; | 354 | printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i); |
| 108 | } | 355 | DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; |
| 109 | } | 356 | } |
| 110 | } | 357 | } |
| 111 | return IRQ_HANDLED; | 358 | return IRQ_HANDLED; |
| @@ -127,6 +374,7 @@ int __init pxa_init_dma(int irq, int num_ch) | |||
| 127 | for (i = 0; i < num_ch; i++) { | 374 | for (i = 0; i < num_ch; i++) { |
| 128 | DCSR(i) = 0; | 375 | DCSR(i) = 0; |
| 129 | dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); | 376 | dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); |
| 377 | spin_lock_init(&dma_channels[i].lock); | ||
| 130 | } | 378 | } |
| 131 | 379 | ||
| 132 | ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); | 380 | ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); |
| @@ -135,10 +383,9 @@ int __init pxa_init_dma(int irq, int num_ch) | |||
| 135 | kfree(dma_channels); | 383 | kfree(dma_channels); |
| 136 | return ret; | 384 | return ret; |
| 137 | } | 385 | } |
| 138 | |||
| 139 | num_dma_channels = num_ch; | 386 | num_dma_channels = num_ch; |
| 387 | |||
| 388 | pxa_dma_init_debugfs(); | ||
| 389 | |||
| 140 | return 0; | 390 | return 0; |
| 141 | } | 391 | } |
| 142 | |||
| 143 | EXPORT_SYMBOL(pxa_request_dma); | ||
| 144 | EXPORT_SYMBOL(pxa_free_dma); | ||
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 64019464c8db..22086e696e8e 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h | |||
| @@ -150,6 +150,74 @@ enum { | |||
| 150 | MFP_PIN_GPIO125, | 150 | MFP_PIN_GPIO125, |
| 151 | MFP_PIN_GPIO126, | 151 | MFP_PIN_GPIO126, |
| 152 | MFP_PIN_GPIO127, | 152 | MFP_PIN_GPIO127, |
| 153 | |||
| 154 | MFP_PIN_GPIO128, | ||
| 155 | MFP_PIN_GPIO129, | ||
| 156 | MFP_PIN_GPIO130, | ||
| 157 | MFP_PIN_GPIO131, | ||
| 158 | MFP_PIN_GPIO132, | ||
| 159 | MFP_PIN_GPIO133, | ||
| 160 | MFP_PIN_GPIO134, | ||
| 161 | MFP_PIN_GPIO135, | ||
| 162 | MFP_PIN_GPIO136, | ||
| 163 | MFP_PIN_GPIO137, | ||
| 164 | MFP_PIN_GPIO138, | ||
| 165 | MFP_PIN_GPIO139, | ||
| 166 | MFP_PIN_GPIO140, | ||
| 167 | MFP_PIN_GPIO141, | ||
| 168 | MFP_PIN_GPIO142, | ||
| 169 | MFP_PIN_GPIO143, | ||
| 170 | MFP_PIN_GPIO144, | ||
| 171 | MFP_PIN_GPIO145, | ||
| 172 | MFP_PIN_GPIO146, | ||
| 173 | MFP_PIN_GPIO147, | ||
| 174 | MFP_PIN_GPIO148, | ||
| 175 | MFP_PIN_GPIO149, | ||
| 176 | MFP_PIN_GPIO150, | ||
| 177 | MFP_PIN_GPIO151, | ||
| 178 | MFP_PIN_GPIO152, | ||
| 179 | MFP_PIN_GPIO153, | ||
| 180 | MFP_PIN_GPIO154, | ||
| 181 | MFP_PIN_GPIO155, | ||
| 182 | MFP_PIN_GPIO156, | ||
| 183 | MFP_PIN_GPIO157, | ||
| 184 | MFP_PIN_GPIO158, | ||
| 185 | MFP_PIN_GPIO159, | ||
| 186 | MFP_PIN_GPIO160, | ||
| 187 | MFP_PIN_GPIO161, | ||
| 188 | MFP_PIN_GPIO162, | ||
| 189 | MFP_PIN_GPIO163, | ||
| 190 | MFP_PIN_GPIO164, | ||
| 191 | MFP_PIN_GPIO165, | ||
| 192 | MFP_PIN_GPIO166, | ||
| 193 | MFP_PIN_GPIO167, | ||
| 194 | MFP_PIN_GPIO168, | ||
| 195 | MFP_PIN_GPIO169, | ||
| 196 | MFP_PIN_GPIO170, | ||
| 197 | MFP_PIN_GPIO171, | ||
| 198 | MFP_PIN_GPIO172, | ||
| 199 | MFP_PIN_GPIO173, | ||
| 200 | MFP_PIN_GPIO174, | ||
| 201 | MFP_PIN_GPIO175, | ||
| 202 | MFP_PIN_GPIO176, | ||
| 203 | MFP_PIN_GPIO177, | ||
| 204 | MFP_PIN_GPIO178, | ||
| 205 | MFP_PIN_GPIO179, | ||
| 206 | MFP_PIN_GPIO180, | ||
| 207 | MFP_PIN_GPIO181, | ||
| 208 | MFP_PIN_GPIO182, | ||
| 209 | MFP_PIN_GPIO183, | ||
| 210 | MFP_PIN_GPIO184, | ||
| 211 | MFP_PIN_GPIO185, | ||
| 212 | MFP_PIN_GPIO186, | ||
| 213 | MFP_PIN_GPIO187, | ||
| 214 | MFP_PIN_GPIO188, | ||
| 215 | MFP_PIN_GPIO189, | ||
| 216 | MFP_PIN_GPIO190, | ||
| 217 | MFP_PIN_GPIO191, | ||
| 218 | |||
| 219 | MFP_PIN_GPIO255 = 255, | ||
| 220 | |||
| 153 | MFP_PIN_GPIO0_2, | 221 | MFP_PIN_GPIO0_2, |
| 154 | MFP_PIN_GPIO1_2, | 222 | MFP_PIN_GPIO1_2, |
| 155 | MFP_PIN_GPIO2_2, | 223 | MFP_PIN_GPIO2_2, |
| @@ -325,8 +393,9 @@ typedef unsigned long mfp_cfg_t; | |||
| 325 | #define MFP_PULL_LOW (0x1 << 21) | 393 | #define MFP_PULL_LOW (0x1 << 21) |
| 326 | #define MFP_PULL_HIGH (0x2 << 21) | 394 | #define MFP_PULL_HIGH (0x2 << 21) |
| 327 | #define MFP_PULL_BOTH (0x3 << 21) | 395 | #define MFP_PULL_BOTH (0x3 << 21) |
| 328 | #define MFP_PULL_MASK (0x3 << 21) | 396 | #define MFP_PULL_FLOAT (0x4 << 21) |
| 329 | #define MFP_PULL(x) (((x) >> 21) & 0x3) | 397 | #define MFP_PULL_MASK (0x7 << 21) |
| 398 | #define MFP_PULL(x) (((x) >> 21) & 0x7) | ||
| 330 | 399 | ||
| 331 | #define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ | 400 | #define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ |
| 332 | MFP_LPM_EDGE_NONE | MFP_PULL_NONE) | 401 | MFP_LPM_EDGE_NONE | MFP_PULL_NONE) |
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index e716c622a17c..9405d0379c85 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c | |||
| @@ -77,11 +77,13 @@ | |||
| 77 | * MFPR_PULL_LOW 1 0 1 | 77 | * MFPR_PULL_LOW 1 0 1 |
| 78 | * MFPR_PULL_HIGH 1 1 0 | 78 | * MFPR_PULL_HIGH 1 1 0 |
| 79 | * MFPR_PULL_BOTH 1 1 1 | 79 | * MFPR_PULL_BOTH 1 1 1 |
| 80 | * MFPR_PULL_FLOAT 1 0 0 | ||
| 80 | */ | 81 | */ |
| 81 | #define MFPR_PULL_NONE (0) | 82 | #define MFPR_PULL_NONE (0) |
| 82 | #define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) | 83 | #define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) |
| 83 | #define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) | 84 | #define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) |
| 84 | #define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) | 85 | #define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) |
| 86 | #define MFPR_PULL_FLOAT (MFPR_PULL_SEL) | ||
| 85 | 87 | ||
| 86 | /* mfp_spin_lock is used to ensure that MFP register configuration | 88 | /* mfp_spin_lock is used to ensure that MFP register configuration |
| 87 | * (most likely a read-modify-write operation) is atomic, and that | 89 | * (most likely a read-modify-write operation) is atomic, and that |
| @@ -116,6 +118,7 @@ static const unsigned long mfpr_pull[] = { | |||
| 116 | MFPR_PULL_LOW, | 118 | MFPR_PULL_LOW, |
| 117 | MFPR_PULL_HIGH, | 119 | MFPR_PULL_HIGH, |
| 118 | MFPR_PULL_BOTH, | 120 | MFPR_PULL_BOTH, |
| 121 | MFPR_PULL_FLOAT, | ||
| 119 | }; | 122 | }; |
| 120 | 123 | ||
| 121 | /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ | 124 | /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ |
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c index 260fdc6ad685..5ff24e0f9f89 100644 --- a/arch/arm/plat-s3c/gpio.c +++ b/arch/arm/plat-s3c/gpio.c | |||
| @@ -28,7 +28,7 @@ static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) | |||
| 28 | 28 | ||
| 29 | gpn = chip->chip.base; | 29 | gpn = chip->chip.base; |
| 30 | for (i = 0; i < chip->chip.ngpio; i++, gpn++) { | 30 | for (i = 0; i < chip->chip.ngpio; i++, gpn++) { |
| 31 | BUG_ON(gpn > ARRAY_SIZE(s3c_gpios)); | 31 | BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); |
| 32 | s3c_gpios[gpn] = chip; | 32 | s3c_gpios[gpn] = chip; |
| 33 | } | 33 | } |
| 34 | } | 34 | } |
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 67aa93dbb69e..266a10745a85 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c | |||
| @@ -345,13 +345,13 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, | |||
| 345 | if (!chan) | 345 | if (!chan) |
| 346 | return -EINVAL; | 346 | return -EINVAL; |
| 347 | 347 | ||
| 348 | buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL); | 348 | buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC); |
| 349 | if (!buff) { | 349 | if (!buff) { |
| 350 | printk(KERN_ERR "%s: no memory for buffer\n", __func__); | 350 | printk(KERN_ERR "%s: no memory for buffer\n", __func__); |
| 351 | return -ENOMEM; | 351 | return -ENOMEM; |
| 352 | } | 352 | } |
| 353 | 353 | ||
| 354 | lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma); | 354 | lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma); |
| 355 | if (!lli) { | 355 | if (!lli) { |
| 356 | printk(KERN_ERR "%s: no memory for lli\n", __func__); | 356 | printk(KERN_ERR "%s: no memory for lli\n", __func__); |
| 357 | ret = -ENOMEM; | 357 | ret = -ENOMEM; |
| @@ -697,7 +697,7 @@ static int __init s3c64xx_dma_init(void) | |||
| 697 | 697 | ||
| 698 | printk(KERN_INFO "%s: Registering DMA channels\n", __func__); | 698 | printk(KERN_INFO "%s: Registering DMA channels\n", __func__); |
| 699 | 699 | ||
| 700 | dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0); | 700 | dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); |
| 701 | if (!dma_pool) { | 701 | if (!dma_pool) { |
| 702 | printk(KERN_ERR "%s: failed to create pool\n", __func__); | 702 | printk(KERN_ERR "%s: failed to create pool\n", __func__); |
| 703 | return -ENOMEM; | 703 | return -ENOMEM; |
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h index 0c30dd986725..8f76a1e474d6 100644 --- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h +++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h | |||
| @@ -26,7 +26,7 @@ struct s3c64xx_dma_buff { | |||
| 26 | struct s3c64xx_dma_buff *next; | 26 | struct s3c64xx_dma_buff *next; |
| 27 | 27 | ||
| 28 | void *pw; | 28 | void *pw; |
| 29 | struct pl080_lli *lli; | 29 | struct pl080s_lli *lli; |
| 30 | dma_addr_t lli_dma; | 30 | dma_addr_t lli_dma; |
| 31 | }; | 31 | }; |
| 32 | 32 | ||
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 743a70094d04..7956fd3bb194 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h | |||
| @@ -194,9 +194,17 @@ | |||
| 194 | 194 | ||
| 195 | #define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) | 195 | #define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) |
| 196 | 196 | ||
| 197 | /* Define a group of interrupts for board-specific use (eg, for MFD | ||
| 198 | * interrupt controllers). */ | ||
| 199 | #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) | ||
| 200 | |||
| 201 | #define IRQ_BOARD_NR 16 | ||
| 202 | |||
| 203 | #define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) | ||
| 204 | |||
| 197 | /* Set the default NR_IRQS */ | 205 | /* Set the default NR_IRQS */ |
| 198 | 206 | ||
| 199 | #define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) | 207 | #define NR_IRQS (IRQ_BOARD_END + 1) |
| 200 | 208 | ||
| 201 | #endif /* __ASM_PLAT_S3C64XX_IRQS_H */ | 209 | #endif /* __ASM_PLAT_S3C64XX_IRQS_H */ |
| 202 | 210 | ||
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index febac1950d8e..9745852261e0 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c | |||
| @@ -302,8 +302,8 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) | |||
| 302 | return -EINVAL; | 302 | return -EINVAL; |
| 303 | 303 | ||
| 304 | val = __raw_readl(reg); | 304 | val = __raw_readl(reg); |
| 305 | val &= ~(0xf << sclk->shift); | 305 | val &= ~(0xf << sclk->divider_shift); |
| 306 | val |= (div - 1) << sclk->shift; | 306 | val |= (div - 1) << sclk->divider_shift; |
| 307 | __raw_writel(val, reg); | 307 | __raw_writel(val, reg); |
| 308 | 308 | ||
| 309 | return 0; | 309 | return 0; |
| @@ -328,6 +328,8 @@ static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent) | |||
| 328 | clksrc |= src_nr << sclk->shift; | 328 | clksrc |= src_nr << sclk->shift; |
| 329 | 329 | ||
| 330 | __raw_writel(clksrc, S3C_CLK_SRC); | 330 | __raw_writel(clksrc, S3C_CLK_SRC); |
| 331 | |||
| 332 | clk->parent = parent; | ||
| 331 | return 0; | 333 | return 0; |
| 332 | } | 334 | } |
| 333 | 335 | ||
| @@ -343,7 +345,7 @@ static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk, | |||
| 343 | if (rate > parent_rate) | 345 | if (rate > parent_rate) |
| 344 | rate = parent_rate; | 346 | rate = parent_rate; |
| 345 | else { | 347 | else { |
| 346 | div = rate / parent_rate; | 348 | div = parent_rate / rate; |
| 347 | 349 | ||
| 348 | if (div == 0) | 350 | if (div == 0) |
| 349 | div = 1; | 351 | div = 1; |
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c index d2f497764dce..ef88f25fb870 100644 --- a/arch/arm/plat-stmp3xxx/dma.c +++ b/arch/arm/plat-stmp3xxx/dma.c | |||
| @@ -264,7 +264,7 @@ int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, | |||
| 264 | stmp3xxx_dma_free_command(ch, | 264 | stmp3xxx_dma_free_command(ch, |
| 265 | &descriptors | 265 | &descriptors |
| 266 | [i]); | 266 | [i]); |
| 267 | } while (i-- >= 0); | 267 | } while (i-- > 0); |
| 268 | } | 268 | } |
| 269 | return err; | 269 | return err; |
| 270 | } | 270 | } |
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index c8c55b469342..94be7bb6cb9a 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types | |||
| @@ -12,7 +12,7 @@ | |||
| 12 | # | 12 | # |
| 13 | # http://www.arm.linux.org.uk/developer/machines/?action=new | 13 | # http://www.arm.linux.org.uk/developer/machines/?action=new |
| 14 | # | 14 | # |
| 15 | # Last update: Sat Sep 12 12:00:16 2009 | 15 | # Last update: Fri Sep 18 21:42:00 2009 |
| 16 | # | 16 | # |
| 17 | # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number | 17 | # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number |
| 18 | # | 18 | # |
| @@ -1638,7 +1638,7 @@ mx35evb MACH_MX35EVB MX35EVB 1643 | |||
| 1638 | aml_m8050 MACH_AML_M8050 AML_M8050 1644 | 1638 | aml_m8050 MACH_AML_M8050 AML_M8050 1644 |
| 1639 | mx35_3ds MACH_MX35_3DS MX35_3DS 1645 | 1639 | mx35_3ds MACH_MX35_3DS MX35_3DS 1645 |
| 1640 | mars MACH_MARS MARS 1646 | 1640 | mars MACH_MARS MARS 1646 |
| 1641 | ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647 | 1641 | neuros_osd2 MACH_NEUROS_OSD2 NEUROS_OSD2 1647 |
| 1642 | badger MACH_BADGER BADGER 1648 | 1642 | badger MACH_BADGER BADGER 1648 |
| 1643 | trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 | 1643 | trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 |
| 1644 | trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 | 1644 | trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 |
| @@ -1654,7 +1654,7 @@ vf10xx MACH_VF10XX VF10XX 1659 | |||
| 1654 | zoran43xx MACH_ZORAN43XX ZORAN43XX 1660 | 1654 | zoran43xx MACH_ZORAN43XX ZORAN43XX 1660 |
| 1655 | sonix926 MACH_SONIX926 SONIX926 1661 | 1655 | sonix926 MACH_SONIX926 SONIX926 1661 |
| 1656 | celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662 | 1656 | celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662 |
| 1657 | cc9m2443 MACH_CC9M2443 CC9M2443 1663 | 1657 | cc9m2443js MACH_CC9M2443JS CC9M2443JS 1663 |
| 1658 | tw5334 MACH_TW5334 TW5334 1664 | 1658 | tw5334 MACH_TW5334 TW5334 1664 |
| 1659 | omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665 | 1659 | omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665 |
| 1660 | nal_hlite MACH_NAL_HLITE NAL_HLITE 1666 | 1660 | nal_hlite MACH_NAL_HLITE NAL_HLITE 1666 |
| @@ -1802,7 +1802,7 @@ ccw9p9215js MACH_CCW9P9215JS CCW9P9215JS 1811 | |||
| 1802 | rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812 | 1802 | rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812 |
| 1803 | sifmain MACH_SIFMAIN SIFMAIN 1813 | 1803 | sifmain MACH_SIFMAIN SIFMAIN 1813 |
| 1804 | sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814 | 1804 | sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814 |
| 1805 | cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815 | 1805 | cc9m2443 MACH_CC9M2443 CC9M2443 1815 |
| 1806 | xaria300 MACH_XARIA300 XARIA300 1816 | 1806 | xaria300 MACH_XARIA300 XARIA300 1816 |
| 1807 | it9200 MACH_IT9200 IT9200 1817 | 1807 | it9200 MACH_IT9200 IT9200 1817 |
| 1808 | rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818 | 1808 | rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818 |
| @@ -2409,3 +2409,15 @@ platypus MACH_PLATYPUS PLATYPUS 2422 | |||
| 2409 | pss2 MACH_PSS2 PSS2 2423 | 2409 | pss2 MACH_PSS2 PSS2 2423 |
| 2410 | davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424 | 2410 | davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424 |
| 2411 | str9100 MACH_STR9100 STR9100 2425 | 2411 | str9100 MACH_STR9100 STR9100 2425 |
| 2412 | net5big MACH_NET5BIG NET5BIG 2426 | ||
| 2413 | seabed9263 MACH_SEABED9263 SEABED9263 2427 | ||
| 2414 | mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 | ||
| 2415 | octvocplus_eb MACH_OCTVOCPLUS_EB OCTVOCPLUS_EB 2429 | ||
| 2416 | klk_firefox MACH_KLK_FIREFOX KLK_FIREFOX 2430 | ||
| 2417 | klk_wirma_module MACH_KLK_WIRMA_MODULE KLK_WIRMA_MODULE 2431 | ||
| 2418 | klk_wirma_mmi MACH_KLK_WIRMA_MMI KLK_WIRMA_MMI 2432 | ||
| 2419 | supersonic MACH_SUPERSONIC SUPERSONIC 2433 | ||
| 2420 | liberty MACH_LIBERTY LIBERTY 2434 | ||
| 2421 | mh355 MACH_MH355 MH355 2435 | ||
| 2422 | pc7802 MACH_PC7802 PC7802 2436 | ||
| 2423 | gnet_sgc MACH_GNET_SGC GNET_SGC 2437 | ||
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6bedd2fcfc15..737335ff2b21 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig | |||
| @@ -477,8 +477,8 @@ config I2C_PNX | |||
| 477 | will be called i2c-pnx. | 477 | will be called i2c-pnx. |
| 478 | 478 | ||
| 479 | config I2C_PXA | 479 | config I2C_PXA |
| 480 | tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" | 480 | tristate "Intel PXA2XX I2C adapter" |
| 481 | depends on EXPERIMENTAL && ARCH_PXA | 481 | depends on ARCH_PXA || ARCH_MMP |
| 482 | help | 482 | help |
| 483 | If you have devices in the PXA I2C bus, say yes to this option. | 483 | If you have devices in the PXA I2C bus, say yes to this option. |
| 484 | This driver can also be built as a module. If so, the module | 484 | This driver can also be built as a module. If so, the module |
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 8741d0f5146a..3d1e5329da12 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c | |||
| @@ -22,12 +22,13 @@ | |||
| 22 | #include <linux/clk.h> | 22 | #include <linux/clk.h> |
| 23 | #include <linux/scatterlist.h> | 23 | #include <linux/scatterlist.h> |
| 24 | #include <linux/gpio.h> | 24 | #include <linux/gpio.h> |
| 25 | #include <linux/amba/mmci.h> | ||
| 26 | #include <linux/regulator/consumer.h> | ||
| 25 | 27 | ||
| 26 | #include <asm/cacheflush.h> | 28 | #include <asm/cacheflush.h> |
| 27 | #include <asm/div64.h> | 29 | #include <asm/div64.h> |
| 28 | #include <asm/io.h> | 30 | #include <asm/io.h> |
| 29 | #include <asm/sizes.h> | 31 | #include <asm/sizes.h> |
| 30 | #include <asm/mach/mmc.h> | ||
| 31 | 32 | ||
| 32 | #include "mmci.h" | 33 | #include "mmci.h" |
| 33 | 34 | ||
| @@ -38,6 +39,36 @@ | |||
| 38 | 39 | ||
| 39 | static unsigned int fmax = 515633; | 40 | static unsigned int fmax = 515633; |
| 40 | 41 | ||
| 42 | /* | ||
| 43 | * This must be called with host->lock held | ||
| 44 | */ | ||
| 45 | static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) | ||
| 46 | { | ||
| 47 | u32 clk = 0; | ||
| 48 | |||
| 49 | if (desired) { | ||
| 50 | if (desired >= host->mclk) { | ||
| 51 | clk = MCI_CLK_BYPASS; | ||
| 52 | host->cclk = host->mclk; | ||
| 53 | } else { | ||
| 54 | clk = host->mclk / (2 * desired) - 1; | ||
| 55 | if (clk >= 256) | ||
| 56 | clk = 255; | ||
| 57 | host->cclk = host->mclk / (2 * (clk + 1)); | ||
| 58 | } | ||
| 59 | if (host->hw_designer == 0x80) | ||
| 60 | clk |= MCI_FCEN; /* Bug fix in ST IP block */ | ||
| 61 | clk |= MCI_CLK_ENABLE; | ||
| 62 | /* This hasn't proven to be worthwhile */ | ||
| 63 | /* clk |= MCI_CLK_PWRSAVE; */ | ||
| 64 | } | ||
| 65 | |||
| 66 | if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) | ||
| 67 | clk |= MCI_WIDE_BUS; | ||
| 68 | |||
| 69 | writel(clk, host->base + MMCICLOCK); | ||
| 70 | } | ||
| 71 | |||
| 41 | static void | 72 | static void |
| 42 | mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) | 73 | mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) |
| 43 | { | 74 | { |
| @@ -419,30 +450,31 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) | |||
| 419 | static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | 450 | static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| 420 | { | 451 | { |
| 421 | struct mmci_host *host = mmc_priv(mmc); | 452 | struct mmci_host *host = mmc_priv(mmc); |
| 422 | u32 clk = 0, pwr = 0; | 453 | u32 pwr = 0; |
| 423 | 454 | unsigned long flags; | |
| 424 | if (ios->clock) { | ||
| 425 | if (ios->clock >= host->mclk) { | ||
| 426 | clk = MCI_CLK_BYPASS; | ||
| 427 | host->cclk = host->mclk; | ||
| 428 | } else { | ||
| 429 | clk = host->mclk / (2 * ios->clock) - 1; | ||
| 430 | if (clk >= 256) | ||
| 431 | clk = 255; | ||
| 432 | host->cclk = host->mclk / (2 * (clk + 1)); | ||
| 433 | } | ||
| 434 | if (host->hw_designer == AMBA_VENDOR_ST) | ||
| 435 | clk |= MCI_FCEN; /* Bug fix in ST IP block */ | ||
| 436 | clk |= MCI_CLK_ENABLE; | ||
| 437 | } | ||
| 438 | |||
| 439 | if (host->plat->translate_vdd) | ||
| 440 | pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); | ||
| 441 | 455 | ||
| 442 | switch (ios->power_mode) { | 456 | switch (ios->power_mode) { |
| 443 | case MMC_POWER_OFF: | 457 | case MMC_POWER_OFF: |
| 458 | if(host->vcc && | ||
| 459 | regulator_is_enabled(host->vcc)) | ||
| 460 | regulator_disable(host->vcc); | ||
| 444 | break; | 461 | break; |
| 445 | case MMC_POWER_UP: | 462 | case MMC_POWER_UP: |
| 463 | #ifdef CONFIG_REGULATOR | ||
| 464 | if (host->vcc) | ||
| 465 | /* This implicitly enables the regulator */ | ||
| 466 | mmc_regulator_set_ocr(host->vcc, ios->vdd); | ||
| 467 | #endif | ||
| 468 | /* | ||
| 469 | * The translate_vdd function is not used if you have | ||
| 470 | * an external regulator, or your design is really weird. | ||
| 471 | * Using it would mean sending in power control BOTH using | ||
| 472 | * a regulator AND the 4 MMCIPWR bits. If we don't have | ||
| 473 | * a regulator, we might have some other platform specific | ||
| 474 | * power control behind this translate function. | ||
| 475 | */ | ||
| 476 | if (!host->vcc && host->plat->translate_vdd) | ||
| 477 | pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); | ||
| 446 | /* The ST version does not have this, fall through to POWER_ON */ | 478 | /* The ST version does not have this, fall through to POWER_ON */ |
| 447 | if (host->hw_designer != AMBA_VENDOR_ST) { | 479 | if (host->hw_designer != AMBA_VENDOR_ST) { |
| 448 | pwr |= MCI_PWR_UP; | 480 | pwr |= MCI_PWR_UP; |
| @@ -465,12 +497,16 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |||
| 465 | } | 497 | } |
| 466 | } | 498 | } |
| 467 | 499 | ||
| 468 | writel(clk, host->base + MMCICLOCK); | 500 | spin_lock_irqsave(&host->lock, flags); |
| 501 | |||
| 502 | mmci_set_clkreg(host, ios->clock); | ||
| 469 | 503 | ||
| 470 | if (host->pwr != pwr) { | 504 | if (host->pwr != pwr) { |
| 471 | host->pwr = pwr; | 505 | host->pwr = pwr; |
| 472 | writel(pwr, host->base + MMCIPOWER); | 506 | writel(pwr, host->base + MMCIPOWER); |
| 473 | } | 507 | } |
| 508 | |||
| 509 | spin_unlock_irqrestore(&host->lock, flags); | ||
| 474 | } | 510 | } |
| 475 | 511 | ||
| 476 | static int mmci_get_ro(struct mmc_host *mmc) | 512 | static int mmci_get_ro(struct mmc_host *mmc) |
| @@ -517,7 +553,7 @@ static void mmci_check_status(unsigned long data) | |||
| 517 | 553 | ||
| 518 | static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) | 554 | static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) |
| 519 | { | 555 | { |
| 520 | struct mmc_platform_data *plat = dev->dev.platform_data; | 556 | struct mmci_platform_data *plat = dev->dev.platform_data; |
| 521 | struct mmci_host *host; | 557 | struct mmci_host *host; |
| 522 | struct mmc_host *mmc; | 558 | struct mmc_host *mmc; |
| 523 | int ret; | 559 | int ret; |
| @@ -583,7 +619,30 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) | |||
| 583 | mmc->ops = &mmci_ops; | 619 | mmc->ops = &mmci_ops; |
| 584 | mmc->f_min = (host->mclk + 511) / 512; | 620 | mmc->f_min = (host->mclk + 511) / 512; |
| 585 | mmc->f_max = min(host->mclk, fmax); | 621 | mmc->f_max = min(host->mclk, fmax); |
| 586 | mmc->ocr_avail = plat->ocr_mask; | 622 | #ifdef CONFIG_REGULATOR |
| 623 | /* If we're using the regulator framework, try to fetch a regulator */ | ||
| 624 | host->vcc = regulator_get(&dev->dev, "vmmc"); | ||
| 625 | if (IS_ERR(host->vcc)) | ||
| 626 | host->vcc = NULL; | ||
| 627 | else { | ||
| 628 | int mask = mmc_regulator_get_ocrmask(host->vcc); | ||
| 629 | |||
| 630 | if (mask < 0) | ||
| 631 | dev_err(&dev->dev, "error getting OCR mask (%d)\n", | ||
| 632 | mask); | ||
| 633 | else { | ||
| 634 | host->mmc->ocr_avail = (u32) mask; | ||
| 635 | if (plat->ocr_mask) | ||
| 636 | dev_warn(&dev->dev, | ||
| 637 | "Provided ocr_mask/setpower will not be used " | ||
| 638 | "(using regulator instead)\n"); | ||
| 639 | } | ||
| 640 | } | ||
| 641 | #endif | ||
| 642 | /* Fall back to platform data if no regulator is found */ | ||
| 643 | if (host->vcc == NULL) | ||
| 644 | mmc->ocr_avail = plat->ocr_mask; | ||
| 645 | mmc->caps = plat->capabilities; | ||
| 587 | 646 | ||
| 588 | /* | 647 | /* |
| 589 | * We can do SGIO | 648 | * We can do SGIO |
| @@ -720,6 +779,10 @@ static int __devexit mmci_remove(struct amba_device *dev) | |||
| 720 | clk_disable(host->clk); | 779 | clk_disable(host->clk); |
| 721 | clk_put(host->clk); | 780 | clk_put(host->clk); |
| 722 | 781 | ||
| 782 | if (regulator_is_enabled(host->vcc)) | ||
| 783 | regulator_disable(host->vcc); | ||
| 784 | regulator_put(host->vcc); | ||
| 785 | |||
| 723 | mmc_free_host(mmc); | 786 | mmc_free_host(mmc); |
| 724 | 787 | ||
| 725 | amba_release_regions(dev); | 788 | amba_release_regions(dev); |
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 839f264c9725..1ceb9a90f59b 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h | |||
| @@ -161,7 +161,7 @@ struct mmci_host { | |||
| 161 | unsigned int mclk; | 161 | unsigned int mclk; |
| 162 | unsigned int cclk; | 162 | unsigned int cclk; |
| 163 | u32 pwr; | 163 | u32 pwr; |
| 164 | struct mmc_platform_data *plat; | 164 | struct mmci_platform_data *plat; |
| 165 | 165 | ||
| 166 | u8 hw_designer; | 166 | u8 hw_designer; |
| 167 | u8 hw_revision:4; | 167 | u8 hw_revision:4; |
| @@ -175,6 +175,7 @@ struct mmci_host { | |||
| 175 | struct scatterlist *sg_ptr; | 175 | struct scatterlist *sg_ptr; |
| 176 | unsigned int sg_off; | 176 | unsigned int sg_off; |
| 177 | unsigned int size; | 177 | unsigned int size; |
| 178 | struct regulator *vcc; | ||
| 178 | }; | 179 | }; |
| 179 | 180 | ||
| 180 | static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) | 181 | static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) |
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index e55ac792d68c..5e0b1529964d 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c | |||
| @@ -28,6 +28,7 @@ | |||
| 28 | #include <linux/mmc/host.h> | 28 | #include <linux/mmc/host.h> |
| 29 | #include <linux/io.h> | 29 | #include <linux/io.h> |
| 30 | #include <linux/regulator/consumer.h> | 30 | #include <linux/regulator/consumer.h> |
| 31 | #include <linux/gpio.h> | ||
| 31 | 32 | ||
| 32 | #include <asm/sizes.h> | 33 | #include <asm/sizes.h> |
| 33 | 34 | ||
| @@ -96,10 +97,18 @@ static inline void pxamci_init_ocr(struct pxamci_host *host) | |||
| 96 | 97 | ||
| 97 | static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd) | 98 | static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd) |
| 98 | { | 99 | { |
| 100 | int on; | ||
| 101 | |||
| 99 | #ifdef CONFIG_REGULATOR | 102 | #ifdef CONFIG_REGULATOR |
| 100 | if (host->vcc) | 103 | if (host->vcc) |
| 101 | mmc_regulator_set_ocr(host->vcc, vdd); | 104 | mmc_regulator_set_ocr(host->vcc, vdd); |
| 102 | #endif | 105 | #endif |
| 106 | if (!host->vcc && host->pdata && | ||
| 107 | gpio_is_valid(host->pdata->gpio_power)) { | ||
| 108 | on = ((1 << vdd) & host->pdata->ocr_mask); | ||
| 109 | gpio_set_value(host->pdata->gpio_power, | ||
| 110 | !!on ^ host->pdata->gpio_power_invert); | ||
| 111 | } | ||
| 103 | if (!host->vcc && host->pdata && host->pdata->setpower) | 112 | if (!host->vcc && host->pdata && host->pdata->setpower) |
| 104 | host->pdata->setpower(mmc_dev(host->mmc), vdd); | 113 | host->pdata->setpower(mmc_dev(host->mmc), vdd); |
| 105 | } | 114 | } |
| @@ -421,6 +430,12 @@ static int pxamci_get_ro(struct mmc_host *mmc) | |||
| 421 | { | 430 | { |
| 422 | struct pxamci_host *host = mmc_priv(mmc); | 431 | struct pxamci_host *host = mmc_priv(mmc); |
| 423 | 432 | ||
| 433 | if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) { | ||
| 434 | if (host->pdata->gpio_card_ro_invert) | ||
| 435 | return !gpio_get_value(host->pdata->gpio_card_ro); | ||
| 436 | else | ||
| 437 | return gpio_get_value(host->pdata->gpio_card_ro); | ||
| 438 | } | ||
| 424 | if (host->pdata && host->pdata->get_ro) | 439 | if (host->pdata && host->pdata->get_ro) |
| 425 | return !!host->pdata->get_ro(mmc_dev(mmc)); | 440 | return !!host->pdata->get_ro(mmc_dev(mmc)); |
| 426 | /* | 441 | /* |
| @@ -534,7 +549,7 @@ static int pxamci_probe(struct platform_device *pdev) | |||
| 534 | struct mmc_host *mmc; | 549 | struct mmc_host *mmc; |
| 535 | struct pxamci_host *host = NULL; | 550 | struct pxamci_host *host = NULL; |
| 536 | struct resource *r, *dmarx, *dmatx; | 551 | struct resource *r, *dmarx, *dmatx; |
| 537 | int ret, irq; | 552 | int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1; |
| 538 | 553 | ||
| 539 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 554 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 540 | irq = platform_get_irq(pdev, 0); | 555 | irq = platform_get_irq(pdev, 0); |
| @@ -661,13 +676,63 @@ static int pxamci_probe(struct platform_device *pdev) | |||
| 661 | } | 676 | } |
| 662 | host->dma_drcmrtx = dmatx->start; | 677 | host->dma_drcmrtx = dmatx->start; |
| 663 | 678 | ||
| 679 | if (host->pdata) { | ||
| 680 | gpio_cd = host->pdata->gpio_card_detect; | ||
| 681 | gpio_ro = host->pdata->gpio_card_ro; | ||
| 682 | gpio_power = host->pdata->gpio_power; | ||
| 683 | } | ||
| 684 | if (gpio_is_valid(gpio_power)) { | ||
| 685 | ret = gpio_request(gpio_power, "mmc card power"); | ||
| 686 | if (ret) { | ||
| 687 | dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power); | ||
| 688 | goto out; | ||
| 689 | } | ||
| 690 | gpio_direction_output(gpio_power, | ||
| 691 | host->pdata->gpio_power_invert); | ||
| 692 | } | ||
| 693 | if (gpio_is_valid(gpio_ro)) { | ||
| 694 | ret = gpio_request(gpio_ro, "mmc card read only"); | ||
| 695 | if (ret) { | ||
| 696 | dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power); | ||
| 697 | goto err_gpio_ro; | ||
| 698 | } | ||
| 699 | gpio_direction_input(gpio_ro); | ||
| 700 | } | ||
| 701 | if (gpio_is_valid(gpio_cd)) { | ||
| 702 | ret = gpio_request(gpio_cd, "mmc card detect"); | ||
| 703 | if (ret) { | ||
| 704 | dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power); | ||
| 705 | goto err_gpio_cd; | ||
| 706 | } | ||
| 707 | gpio_direction_input(gpio_cd); | ||
| 708 | |||
| 709 | ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq, | ||
| 710 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | ||
| 711 | "mmc card detect", mmc); | ||
| 712 | if (ret) { | ||
| 713 | dev_err(&pdev->dev, "failed to request card detect IRQ\n"); | ||
| 714 | goto err_request_irq; | ||
| 715 | } | ||
| 716 | } | ||
| 717 | |||
| 664 | if (host->pdata && host->pdata->init) | 718 | if (host->pdata && host->pdata->init) |
| 665 | host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc); | 719 | host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc); |
| 666 | 720 | ||
| 721 | if (gpio_is_valid(gpio_power) && host->pdata->setpower) | ||
| 722 | dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n"); | ||
| 723 | if (gpio_is_valid(gpio_ro) && host->pdata->get_ro) | ||
| 724 | dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n"); | ||
| 725 | |||
| 667 | mmc_add_host(mmc); | 726 | mmc_add_host(mmc); |
| 668 | 727 | ||
| 669 | return 0; | 728 | return 0; |
| 670 | 729 | ||
| 730 | err_request_irq: | ||
| 731 | gpio_free(gpio_cd); | ||
| 732 | err_gpio_cd: | ||
| 733 | gpio_free(gpio_ro); | ||
| 734 | err_gpio_ro: | ||
| 735 | gpio_free(gpio_power); | ||
| 671 | out: | 736 | out: |
| 672 | if (host) { | 737 | if (host) { |
| 673 | if (host->dma >= 0) | 738 | if (host->dma >= 0) |
| @@ -688,12 +753,26 @@ static int pxamci_probe(struct platform_device *pdev) | |||
| 688 | static int pxamci_remove(struct platform_device *pdev) | 753 | static int pxamci_remove(struct platform_device *pdev) |
| 689 | { | 754 | { |
| 690 | struct mmc_host *mmc = platform_get_drvdata(pdev); | 755 | struct mmc_host *mmc = platform_get_drvdata(pdev); |
| 756 | int gpio_cd = -1, gpio_ro = -1, gpio_power = -1; | ||
| 691 | 757 | ||
| 692 | platform_set_drvdata(pdev, NULL); | 758 | platform_set_drvdata(pdev, NULL); |
| 693 | 759 | ||
| 694 | if (mmc) { | 760 | if (mmc) { |
| 695 | struct pxamci_host *host = mmc_priv(mmc); | 761 | struct pxamci_host *host = mmc_priv(mmc); |
| 696 | 762 | ||
| 763 | if (host->pdata) { | ||
| 764 | gpio_cd = host->pdata->gpio_card_detect; | ||
| 765 | gpio_ro = host->pdata->gpio_card_ro; | ||
| 766 | gpio_power = host->pdata->gpio_power; | ||
| 767 | } | ||
| 768 | if (gpio_is_valid(gpio_cd)) { | ||
| 769 | free_irq(gpio_to_irq(gpio_cd), mmc); | ||
| 770 | gpio_free(gpio_cd); | ||
| 771 | } | ||
| 772 | if (gpio_is_valid(gpio_ro)) | ||
| 773 | gpio_free(gpio_ro); | ||
| 774 | if (gpio_is_valid(gpio_power)) | ||
| 775 | gpio_free(gpio_power); | ||
| 697 | if (host->vcc) | 776 | if (host->vcc) |
| 698 | regulator_put(host->vcc); | 777 | regulator_put(host->vcc); |
| 699 | 778 | ||
| @@ -725,20 +804,20 @@ static int pxamci_remove(struct platform_device *pdev) | |||
| 725 | } | 804 | } |
| 726 | 805 | ||
| 727 | #ifdef CONFIG_PM | 806 | #ifdef CONFIG_PM |
| 728 | static int pxamci_suspend(struct platform_device *dev, pm_message_t state) | 807 | static int pxamci_suspend(struct device *dev) |
| 729 | { | 808 | { |
| 730 | struct mmc_host *mmc = platform_get_drvdata(dev); | 809 | struct mmc_host *mmc = dev_get_drvdata(dev); |
| 731 | int ret = 0; | 810 | int ret = 0; |
| 732 | 811 | ||
| 733 | if (mmc) | 812 | if (mmc) |
| 734 | ret = mmc_suspend_host(mmc, state); | 813 | ret = mmc_suspend_host(mmc, PMSG_SUSPEND); |
| 735 | 814 | ||
| 736 | return ret; | 815 | return ret; |
| 737 | } | 816 | } |
| 738 | 817 | ||
| 739 | static int pxamci_resume(struct platform_device *dev) | 818 | static int pxamci_resume(struct device *dev) |
| 740 | { | 819 | { |
| 741 | struct mmc_host *mmc = platform_get_drvdata(dev); | 820 | struct mmc_host *mmc = dev_get_drvdata(dev); |
| 742 | int ret = 0; | 821 | int ret = 0; |
| 743 | 822 | ||
| 744 | if (mmc) | 823 | if (mmc) |
| @@ -746,19 +825,22 @@ static int pxamci_resume(struct platform_device *dev) | |||
| 746 | 825 | ||
| 747 | return ret; | 826 | return ret; |
| 748 | } | 827 | } |
| 749 | #else | 828 | |
| 750 | #define pxamci_suspend NULL | 829 | static struct dev_pm_ops pxamci_pm_ops = { |
| 751 | #define pxamci_resume NULL | 830 | .suspend = pxamci_suspend, |
| 831 | .resume = pxamci_resume, | ||
| 832 | }; | ||
| 752 | #endif | 833 | #endif |
| 753 | 834 | ||
| 754 | static struct platform_driver pxamci_driver = { | 835 | static struct platform_driver pxamci_driver = { |
| 755 | .probe = pxamci_probe, | 836 | .probe = pxamci_probe, |
| 756 | .remove = pxamci_remove, | 837 | .remove = pxamci_remove, |
| 757 | .suspend = pxamci_suspend, | ||
| 758 | .resume = pxamci_resume, | ||
| 759 | .driver = { | 838 | .driver = { |
| 760 | .name = DRIVER_NAME, | 839 | .name = DRIVER_NAME, |
| 761 | .owner = THIS_MODULE, | 840 | .owner = THIS_MODULE, |
| 841 | #ifdef CONFIG_PM | ||
| 842 | .pm = &pxamci_pm_ops, | ||
| 843 | #endif | ||
| 762 | }, | 844 | }, |
| 763 | }; | 845 | }; |
| 764 | 846 | ||
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 1445e5865196..84db145d2b59 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c | |||
| @@ -17,6 +17,7 @@ | |||
| 17 | #include <linux/etherdevice.h> | 17 | #include <linux/etherdevice.h> |
| 18 | #include <linux/platform_device.h> | 18 | #include <linux/platform_device.h> |
| 19 | #include <linux/clk.h> | 19 | #include <linux/clk.h> |
| 20 | #include <linux/gpio.h> | ||
| 20 | 21 | ||
| 21 | #include <net/irda/irda.h> | 22 | #include <net/irda/irda.h> |
| 22 | #include <net/irda/irmod.h> | 23 | #include <net/irda/irmod.h> |
| @@ -163,6 +164,22 @@ inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si) | |||
| 163 | } | 164 | } |
| 164 | 165 | ||
| 165 | /* | 166 | /* |
| 167 | * Set the IrDA communications mode. | ||
| 168 | */ | ||
| 169 | static void pxa_irda_set_mode(struct pxa_irda *si, int mode) | ||
| 170 | { | ||
| 171 | if (si->pdata->transceiver_mode) | ||
| 172 | si->pdata->transceiver_mode(si->dev, mode); | ||
| 173 | else { | ||
| 174 | if (gpio_is_valid(si->pdata->gpio_pwdown)) | ||
| 175 | gpio_set_value(si->pdata->gpio_pwdown, | ||
| 176 | !(mode & IR_OFF) ^ | ||
| 177 | !si->pdata->gpio_pwdown_inverted); | ||
| 178 | pxa2xx_transceiver_mode(si->dev, mode); | ||
| 179 | } | ||
| 180 | } | ||
| 181 | |||
| 182 | /* | ||
| 166 | * Set the IrDA communications speed. | 183 | * Set the IrDA communications speed. |
| 167 | */ | 184 | */ |
| 168 | static int pxa_irda_set_speed(struct pxa_irda *si, int speed) | 185 | static int pxa_irda_set_speed(struct pxa_irda *si, int speed) |
| @@ -188,7 +205,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed) | |||
| 188 | pxa_irda_disable_clk(si); | 205 | pxa_irda_disable_clk(si); |
| 189 | 206 | ||
| 190 | /* set board transceiver to SIR mode */ | 207 | /* set board transceiver to SIR mode */ |
| 191 | si->pdata->transceiver_mode(si->dev, IR_SIRMODE); | 208 | pxa_irda_set_mode(si, IR_SIRMODE); |
| 192 | 209 | ||
| 193 | /* enable the STUART clock */ | 210 | /* enable the STUART clock */ |
| 194 | pxa_irda_enable_sirclk(si); | 211 | pxa_irda_enable_sirclk(si); |
| @@ -222,7 +239,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed) | |||
| 222 | ICCR0 = 0; | 239 | ICCR0 = 0; |
| 223 | 240 | ||
| 224 | /* set board transceiver to FIR mode */ | 241 | /* set board transceiver to FIR mode */ |
| 225 | si->pdata->transceiver_mode(si->dev, IR_FIRMODE); | 242 | pxa_irda_set_mode(si, IR_FIRMODE); |
| 226 | 243 | ||
| 227 | /* enable the FICP clock */ | 244 | /* enable the FICP clock */ |
| 228 | pxa_irda_enable_firclk(si); | 245 | pxa_irda_enable_firclk(si); |
| @@ -641,7 +658,7 @@ static void pxa_irda_shutdown(struct pxa_irda *si) | |||
| 641 | local_irq_restore(flags); | 658 | local_irq_restore(flags); |
| 642 | 659 | ||
| 643 | /* power off board transceiver */ | 660 | /* power off board transceiver */ |
| 644 | si->pdata->transceiver_mode(si->dev, IR_OFF); | 661 | pxa_irda_set_mode(si, IR_OFF); |
| 645 | 662 | ||
| 646 | printk(KERN_DEBUG "pxa_ir: irda shutdown\n"); | 663 | printk(KERN_DEBUG "pxa_ir: irda shutdown\n"); |
| 647 | } | 664 | } |
| @@ -849,10 +866,26 @@ static int pxa_irda_probe(struct platform_device *pdev) | |||
| 849 | if (err) | 866 | if (err) |
| 850 | goto err_mem_5; | 867 | goto err_mem_5; |
| 851 | 868 | ||
| 852 | if (si->pdata->startup) | 869 | if (gpio_is_valid(si->pdata->gpio_pwdown)) { |
| 870 | err = gpio_request(si->pdata->gpio_pwdown, "IrDA switch"); | ||
| 871 | if (err) | ||
| 872 | goto err_startup; | ||
| 873 | err = gpio_direction_output(si->pdata->gpio_pwdown, | ||
| 874 | !si->pdata->gpio_pwdown_inverted); | ||
| 875 | if (err) { | ||
| 876 | gpio_free(si->pdata->gpio_pwdown); | ||
| 877 | goto err_startup; | ||
| 878 | } | ||
| 879 | } | ||
| 880 | |||
| 881 | if (si->pdata->startup) { | ||
| 853 | err = si->pdata->startup(si->dev); | 882 | err = si->pdata->startup(si->dev); |
| 854 | if (err) | 883 | if (err) |
| 855 | goto err_startup; | 884 | goto err_startup; |
| 885 | } | ||
| 886 | |||
| 887 | if (gpio_is_valid(si->pdata->gpio_pwdown) && si->pdata->startup) | ||
| 888 | dev_warn(si->dev, "gpio_pwdown and startup() both defined!\n"); | ||
| 856 | 889 | ||
| 857 | dev->netdev_ops = &pxa_irda_netdev_ops; | 890 | dev->netdev_ops = &pxa_irda_netdev_ops; |
| 858 | 891 | ||
| @@ -903,6 +936,8 @@ static int pxa_irda_remove(struct platform_device *_dev) | |||
| 903 | if (dev) { | 936 | if (dev) { |
| 904 | struct pxa_irda *si = netdev_priv(dev); | 937 | struct pxa_irda *si = netdev_priv(dev); |
| 905 | unregister_netdev(dev); | 938 | unregister_netdev(dev); |
| 939 | if (gpio_is_valid(si->pdata->gpio_pwdown)) | ||
| 940 | gpio_free(si->pdata->gpio_pwdown); | ||
| 906 | if (si->pdata->shutdown) | 941 | if (si->pdata->shutdown) |
| 907 | si->pdata->shutdown(si->dev); | 942 | si->pdata->shutdown(si->dev); |
| 908 | kfree(si->tx_buff.head); | 943 | kfree(si->tx_buff.head); |
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 047394d98ac2..3247828aa203 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile | |||
| @@ -71,6 +71,7 @@ pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o | |||
| 71 | pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o | 71 | pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o |
| 72 | pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o | 72 | pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o |
| 73 | pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o | 73 | pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o |
| 74 | pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o | ||
| 74 | pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o | 75 | pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o |
| 75 | pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o | 76 | pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o |
| 76 | pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o | 77 | pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o |
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index c49a7269f6d1..87e22ef8eb02 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c | |||
| @@ -300,25 +300,29 @@ static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev) | |||
| 300 | return soc_common_drv_pcmcia_remove(&dev->dev); | 300 | return soc_common_drv_pcmcia_remove(&dev->dev); |
| 301 | } | 301 | } |
| 302 | 302 | ||
| 303 | static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state) | 303 | static int pxa2xx_drv_pcmcia_suspend(struct device *dev) |
| 304 | { | 304 | { |
| 305 | return pcmcia_socket_dev_suspend(&dev->dev, state); | 305 | return pcmcia_socket_dev_suspend(dev, PMSG_SUSPEND); |
| 306 | } | 306 | } |
| 307 | 307 | ||
| 308 | static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev) | 308 | static int pxa2xx_drv_pcmcia_resume(struct device *dev) |
| 309 | { | 309 | { |
| 310 | pxa2xx_configure_sockets(&dev->dev); | 310 | pxa2xx_configure_sockets(dev); |
| 311 | return pcmcia_socket_dev_resume(&dev->dev); | 311 | return pcmcia_socket_dev_resume(dev); |
| 312 | } | 312 | } |
| 313 | 313 | ||
| 314 | static struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = { | ||
| 315 | .suspend = pxa2xx_drv_pcmcia_suspend, | ||
| 316 | .resume = pxa2xx_drv_pcmcia_resume, | ||
| 317 | }; | ||
| 318 | |||
| 314 | static struct platform_driver pxa2xx_pcmcia_driver = { | 319 | static struct platform_driver pxa2xx_pcmcia_driver = { |
| 315 | .probe = pxa2xx_drv_pcmcia_probe, | 320 | .probe = pxa2xx_drv_pcmcia_probe, |
| 316 | .remove = pxa2xx_drv_pcmcia_remove, | 321 | .remove = pxa2xx_drv_pcmcia_remove, |
| 317 | .suspend = pxa2xx_drv_pcmcia_suspend, | ||
| 318 | .resume = pxa2xx_drv_pcmcia_resume, | ||
| 319 | .driver = { | 322 | .driver = { |
| 320 | .name = "pxa2xx-pcmcia", | 323 | .name = "pxa2xx-pcmcia", |
| 321 | .owner = THIS_MODULE, | 324 | .owner = THIS_MODULE, |
| 325 | .pm = &pxa2xx_drv_pcmcia_pm_ops, | ||
| 322 | }, | 326 | }, |
| 323 | }; | 327 | }; |
| 324 | 328 | ||
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c new file mode 100644 index 000000000000..3a8993ed5621 --- /dev/null +++ b/drivers/pcmcia/pxa2xx_palmtc.c | |||
| @@ -0,0 +1,230 @@ | |||
| 1 | /* | ||
| 2 | * linux/drivers/pcmcia/pxa2xx_palmtc.c | ||
| 3 | * | ||
| 4 | * Driver for Palm Tungsten|C PCMCIA | ||
| 5 | * | ||
| 6 | * Copyright (C) 2008 Alex Osborne <ato@meshy.org> | ||
| 7 | * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com> | ||
| 8 | * | ||
| 9 | * This program is free software; you can redistribute it and/or modify | ||
| 10 | * it under the terms of the GNU General Public License version 2 as | ||
| 11 | * published by the Free Software Foundation. | ||
| 12 | * | ||
| 13 | */ | ||
| 14 | |||
| 15 | #include <linux/module.h> | ||
| 16 | #include <linux/platform_device.h> | ||
| 17 | #include <linux/gpio.h> | ||
| 18 | #include <linux/delay.h> | ||
| 19 | |||
| 20 | #include <asm/mach-types.h> | ||
| 21 | #include <mach/palmtc.h> | ||
| 22 | #include "soc_common.h" | ||
| 23 | |||
| 24 | static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) | ||
| 25 | { | ||
| 26 | int ret; | ||
| 27 | |||
| 28 | ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1"); | ||
| 29 | if (ret) | ||
| 30 | goto err1; | ||
| 31 | ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0); | ||
| 32 | if (ret) | ||
| 33 | goto err2; | ||
| 34 | |||
| 35 | ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2"); | ||
| 36 | if (ret) | ||
| 37 | goto err2; | ||
| 38 | ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0); | ||
| 39 | if (ret) | ||
| 40 | goto err3; | ||
| 41 | |||
| 42 | ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3"); | ||
| 43 | if (ret) | ||
| 44 | goto err3; | ||
| 45 | ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0); | ||
| 46 | if (ret) | ||
| 47 | goto err4; | ||
| 48 | |||
| 49 | ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST"); | ||
| 50 | if (ret) | ||
| 51 | goto err4; | ||
| 52 | ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1); | ||
| 53 | if (ret) | ||
| 54 | goto err5; | ||
| 55 | |||
| 56 | ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY"); | ||
| 57 | if (ret) | ||
| 58 | goto err5; | ||
| 59 | ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY); | ||
| 60 | if (ret) | ||
| 61 | goto err6; | ||
| 62 | |||
| 63 | ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY"); | ||
| 64 | if (ret) | ||
| 65 | goto err6; | ||
| 66 | ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY); | ||
| 67 | if (ret) | ||
| 68 | goto err7; | ||
| 69 | |||
| 70 | skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY); | ||
| 71 | return 0; | ||
| 72 | |||
| 73 | err7: | ||
| 74 | gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY); | ||
| 75 | err6: | ||
| 76 | gpio_free(GPIO_NR_PALMTC_PCMCIA_READY); | ||
| 77 | err5: | ||
| 78 | gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET); | ||
| 79 | err4: | ||
| 80 | gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3); | ||
| 81 | err3: | ||
| 82 | gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2); | ||
| 83 | err2: | ||
| 84 | gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1); | ||
| 85 | err1: | ||
| 86 | return ret; | ||
| 87 | } | ||
| 88 | |||
| 89 | static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) | ||
| 90 | { | ||
| 91 | gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY); | ||
| 92 | gpio_free(GPIO_NR_PALMTC_PCMCIA_READY); | ||
| 93 | gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET); | ||
| 94 | gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3); | ||
| 95 | gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2); | ||
| 96 | gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1); | ||
| 97 | } | ||
| 98 | |||
| 99 | static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt, | ||
| 100 | struct pcmcia_state *state) | ||
| 101 | { | ||
| 102 | state->detect = 1; /* always inserted */ | ||
| 103 | state->ready = !!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_READY); | ||
| 104 | state->bvd1 = 1; | ||
| 105 | state->bvd2 = 1; | ||
| 106 | state->wrprot = 0; | ||
| 107 | state->vs_3v = 1; | ||
| 108 | state->vs_Xv = 0; | ||
| 109 | } | ||
| 110 | |||
| 111 | static int palmtc_wifi_powerdown(void) | ||
| 112 | { | ||
| 113 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1); | ||
| 114 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0); | ||
| 115 | mdelay(40); | ||
| 116 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0); | ||
| 117 | return 0; | ||
| 118 | } | ||
| 119 | |||
| 120 | static int palmtc_wifi_powerup(void) | ||
| 121 | { | ||
| 122 | int timeout = 50; | ||
| 123 | |||
| 124 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1); | ||
| 125 | mdelay(50); | ||
| 126 | |||
| 127 | /* Power up the card, 1.8V first, after a while 3.3V */ | ||
| 128 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1); | ||
| 129 | mdelay(100); | ||
| 130 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1); | ||
| 131 | |||
| 132 | /* Wait till the card is ready */ | ||
| 133 | while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) && | ||
| 134 | timeout) { | ||
| 135 | mdelay(1); | ||
| 136 | timeout--; | ||
| 137 | } | ||
| 138 | |||
| 139 | /* Power down the WiFi in case of error */ | ||
| 140 | if (!timeout) { | ||
| 141 | palmtc_wifi_powerdown(); | ||
| 142 | return 1; | ||
| 143 | } | ||
| 144 | |||
| 145 | /* Reset the card */ | ||
| 146 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1); | ||
| 147 | mdelay(20); | ||
| 148 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0); | ||
| 149 | mdelay(25); | ||
| 150 | |||
| 151 | gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0); | ||
| 152 | |||
| 153 | return 0; | ||
| 154 | } | ||
| 155 | |||
| 156 | static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, | ||
| 157 | const socket_state_t *state) | ||
| 158 | { | ||
| 159 | int ret = 1; | ||
| 160 | |||
| 161 | if (state->Vcc == 0) | ||
| 162 | ret = palmtc_wifi_powerdown(); | ||
| 163 | else if (state->Vcc == 33) | ||
| 164 | ret = palmtc_wifi_powerup(); | ||
| 165 | |||
| 166 | return ret; | ||
| 167 | } | ||
| 168 | |||
| 169 | static void palmtc_pcmcia_socket_init(struct soc_pcmcia_socket *skt) | ||
| 170 | { | ||
| 171 | } | ||
| 172 | |||
| 173 | static void palmtc_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | ||
| 174 | { | ||
| 175 | } | ||
| 176 | |||
| 177 | static struct pcmcia_low_level palmtc_pcmcia_ops = { | ||
| 178 | .owner = THIS_MODULE, | ||
| 179 | |||
| 180 | .first = 0, | ||
| 181 | .nr = 1, | ||
| 182 | |||
| 183 | .hw_init = palmtc_pcmcia_hw_init, | ||
| 184 | .hw_shutdown = palmtc_pcmcia_hw_shutdown, | ||
| 185 | |||
| 186 | .socket_state = palmtc_pcmcia_socket_state, | ||
| 187 | .configure_socket = palmtc_pcmcia_configure_socket, | ||
| 188 | |||
| 189 | .socket_init = palmtc_pcmcia_socket_init, | ||
| 190 | .socket_suspend = palmtc_pcmcia_socket_suspend, | ||
| 191 | }; | ||
| 192 | |||
| 193 | static struct platform_device *palmtc_pcmcia_device; | ||
| 194 | |||
| 195 | static int __init palmtc_pcmcia_init(void) | ||
| 196 | { | ||
| 197 | int ret; | ||
| 198 | |||
| 199 | if (!machine_is_palmtc()) | ||
| 200 | return -ENODEV; | ||
| 201 | |||
| 202 | palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); | ||
| 203 | if (!palmtc_pcmcia_device) | ||
| 204 | return -ENOMEM; | ||
| 205 | |||
| 206 | ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops, | ||
| 207 | sizeof(palmtc_pcmcia_ops)); | ||
| 208 | |||
| 209 | if (!ret) | ||
| 210 | ret = platform_device_add(palmtc_pcmcia_device); | ||
| 211 | |||
| 212 | if (ret) | ||
| 213 | platform_device_put(palmtc_pcmcia_device); | ||
| 214 | |||
| 215 | return ret; | ||
| 216 | } | ||
| 217 | |||
| 218 | static void __exit palmtc_pcmcia_exit(void) | ||
| 219 | { | ||
| 220 | platform_device_unregister(palmtc_pcmcia_device); | ||
| 221 | } | ||
| 222 | |||
| 223 | module_init(palmtc_pcmcia_init); | ||
| 224 | module_exit(palmtc_pcmcia_exit); | ||
| 225 | |||
| 226 | MODULE_AUTHOR("Alex Osborne <ato@meshy.org>," | ||
| 227 | " Marek Vasut <marek.vasut@gmail.com>"); | ||
| 228 | MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C"); | ||
| 229 | MODULE_ALIAS("platform:pxa2xx-pcmcia"); | ||
| 230 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index bb8cc05605ac..747ca194fad4 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c | |||
| @@ -438,34 +438,37 @@ static int __exit pxa_rtc_remove(struct platform_device *pdev) | |||
| 438 | } | 438 | } |
| 439 | 439 | ||
| 440 | #ifdef CONFIG_PM | 440 | #ifdef CONFIG_PM |
| 441 | static int pxa_rtc_suspend(struct platform_device *pdev, pm_message_t state) | 441 | static int pxa_rtc_suspend(struct device *dev) |
| 442 | { | 442 | { |
| 443 | struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev); | 443 | struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev); |
| 444 | 444 | ||
| 445 | if (device_may_wakeup(&pdev->dev)) | 445 | if (device_may_wakeup(dev)) |
| 446 | enable_irq_wake(pxa_rtc->irq_Alrm); | 446 | enable_irq_wake(pxa_rtc->irq_Alrm); |
| 447 | return 0; | 447 | return 0; |
| 448 | } | 448 | } |
| 449 | 449 | ||
| 450 | static int pxa_rtc_resume(struct platform_device *pdev) | 450 | static int pxa_rtc_resume(struct device *dev) |
| 451 | { | 451 | { |
| 452 | struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev); | 452 | struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev); |
| 453 | 453 | ||
| 454 | if (device_may_wakeup(&pdev->dev)) | 454 | if (device_may_wakeup(dev)) |
| 455 | disable_irq_wake(pxa_rtc->irq_Alrm); | 455 | disable_irq_wake(pxa_rtc->irq_Alrm); |
| 456 | return 0; | 456 | return 0; |
| 457 | } | 457 | } |
| 458 | #else | 458 | |
| 459 | #define pxa_rtc_suspend NULL | 459 | static struct dev_pm_ops pxa_rtc_pm_ops = { |
| 460 | #define pxa_rtc_resume NULL | 460 | .suspend = pxa_rtc_suspend, |
| 461 | .resume = pxa_rtc_resume, | ||
| 462 | }; | ||
| 461 | #endif | 463 | #endif |
| 462 | 464 | ||
| 463 | static struct platform_driver pxa_rtc_driver = { | 465 | static struct platform_driver pxa_rtc_driver = { |
| 464 | .remove = __exit_p(pxa_rtc_remove), | 466 | .remove = __exit_p(pxa_rtc_remove), |
| 465 | .suspend = pxa_rtc_suspend, | ||
| 466 | .resume = pxa_rtc_resume, | ||
| 467 | .driver = { | 467 | .driver = { |
| 468 | .name = "pxa-rtc", | 468 | .name = "pxa-rtc", |
| 469 | #ifdef CONFIG_PM | ||
| 470 | .pm = &pxa_rtc_pm_ops, | ||
| 471 | #endif | ||
| 469 | }, | 472 | }, |
| 470 | }; | 473 | }; |
| 471 | 474 | ||
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 021b2928f0b9..29f98a70586e 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c | |||
| @@ -393,31 +393,34 @@ static int sa1100_rtc_remove(struct platform_device *pdev) | |||
| 393 | } | 393 | } |
| 394 | 394 | ||
| 395 | #ifdef CONFIG_PM | 395 | #ifdef CONFIG_PM |
| 396 | static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state) | 396 | static int sa1100_rtc_suspend(struct device *dev) |
| 397 | { | 397 | { |
| 398 | if (device_may_wakeup(&pdev->dev)) | 398 | if (device_may_wakeup(dev)) |
| 399 | enable_irq_wake(IRQ_RTCAlrm); | 399 | enable_irq_wake(IRQ_RTCAlrm); |
| 400 | return 0; | 400 | return 0; |
| 401 | } | 401 | } |
| 402 | 402 | ||
| 403 | static int sa1100_rtc_resume(struct platform_device *pdev) | 403 | static int sa1100_rtc_resume(struct device *dev) |
| 404 | { | 404 | { |
| 405 | if (device_may_wakeup(&pdev->dev)) | 405 | if (device_may_wakeup(dev)) |
| 406 | disable_irq_wake(IRQ_RTCAlrm); | 406 | disable_irq_wake(IRQ_RTCAlrm); |
| 407 | return 0; | 407 | return 0; |
| 408 | } | 408 | } |
| 409 | #else | 409 | |
| 410 | #define sa1100_rtc_suspend NULL | 410 | static struct dev_pm_ops sa1100_rtc_pm_ops = { |
| 411 | #define sa1100_rtc_resume NULL | 411 | .suspend = sa1100_rtc_suspend, |
| 412 | .resume = sa1100_rtc_resume, | ||
| 413 | }; | ||
| 412 | #endif | 414 | #endif |
| 413 | 415 | ||
| 414 | static struct platform_driver sa1100_rtc_driver = { | 416 | static struct platform_driver sa1100_rtc_driver = { |
| 415 | .probe = sa1100_rtc_probe, | 417 | .probe = sa1100_rtc_probe, |
| 416 | .remove = sa1100_rtc_remove, | 418 | .remove = sa1100_rtc_remove, |
| 417 | .suspend = sa1100_rtc_suspend, | ||
| 418 | .resume = sa1100_rtc_resume, | ||
| 419 | .driver = { | 419 | .driver = { |
| 420 | .name = "sa1100-rtc", | 420 | .name = "sa1100-rtc", |
| 421 | #ifdef CONFIG_PM | ||
| 422 | .pm = &sa1100_rtc_pm_ops, | ||
| 423 | #endif | ||
| 421 | }, | 424 | }, |
| 422 | }; | 425 | }; |
| 423 | 426 | ||
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 6443b7ff274a..b8629d74f6a2 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c | |||
| @@ -726,9 +726,10 @@ static struct uart_driver serial_pxa_reg = { | |||
| 726 | .cons = PXA_CONSOLE, | 726 | .cons = PXA_CONSOLE, |
| 727 | }; | 727 | }; |
| 728 | 728 | ||
| 729 | static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state) | 729 | #ifdef CONFIG_PM |
| 730 | static int serial_pxa_suspend(struct device *dev) | ||
| 730 | { | 731 | { |
| 731 | struct uart_pxa_port *sport = platform_get_drvdata(dev); | 732 | struct uart_pxa_port *sport = dev_get_drvdata(dev); |
| 732 | 733 | ||
| 733 | if (sport) | 734 | if (sport) |
| 734 | uart_suspend_port(&serial_pxa_reg, &sport->port); | 735 | uart_suspend_port(&serial_pxa_reg, &sport->port); |
| @@ -736,9 +737,9 @@ static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state) | |||
| 736 | return 0; | 737 | return 0; |
| 737 | } | 738 | } |
| 738 | 739 | ||
| 739 | static int serial_pxa_resume(struct platform_device *dev) | 740 | static int serial_pxa_resume(struct device *dev) |
| 740 | { | 741 | { |
| 741 | struct uart_pxa_port *sport = platform_get_drvdata(dev); | 742 | struct uart_pxa_port *sport = dev_get_drvdata(dev); |
| 742 | 743 | ||
| 743 | if (sport) | 744 | if (sport) |
| 744 | uart_resume_port(&serial_pxa_reg, &sport->port); | 745 | uart_resume_port(&serial_pxa_reg, &sport->port); |
| @@ -746,6 +747,12 @@ static int serial_pxa_resume(struct platform_device *dev) | |||
| 746 | return 0; | 747 | return 0; |
| 747 | } | 748 | } |
| 748 | 749 | ||
| 750 | static struct dev_pm_ops serial_pxa_pm_ops = { | ||
| 751 | .suspend = serial_pxa_suspend, | ||
| 752 | .resume = serial_pxa_resume, | ||
| 753 | }; | ||
| 754 | #endif | ||
| 755 | |||
| 749 | static int serial_pxa_probe(struct platform_device *dev) | 756 | static int serial_pxa_probe(struct platform_device *dev) |
| 750 | { | 757 | { |
| 751 | struct uart_pxa_port *sport; | 758 | struct uart_pxa_port *sport; |
| @@ -825,11 +832,12 @@ static struct platform_driver serial_pxa_driver = { | |||
| 825 | .probe = serial_pxa_probe, | 832 | .probe = serial_pxa_probe, |
| 826 | .remove = serial_pxa_remove, | 833 | .remove = serial_pxa_remove, |
| 827 | 834 | ||
| 828 | .suspend = serial_pxa_suspend, | ||
| 829 | .resume = serial_pxa_resume, | ||
| 830 | .driver = { | 835 | .driver = { |
| 831 | .name = "pxa2xx-uart", | 836 | .name = "pxa2xx-uart", |
| 832 | .owner = THIS_MODULE, | 837 | .owner = THIS_MODULE, |
| 838 | #ifdef CONFIG_PM | ||
| 839 | .pm = &serial_pxa_pm_ops, | ||
| 840 | #endif | ||
| 833 | }, | 841 | }, |
| 834 | }; | 842 | }; |
| 835 | 843 | ||
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index c0f950a7cbec..958a3ffc8987 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c | |||
| @@ -532,7 +532,7 @@ static void restore_state(struct pl022 *pl022) | |||
| 532 | GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ | 532 | GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ |
| 533 | GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \ | 533 | GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \ |
| 534 | GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ | 534 | GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ |
| 535 | GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \ | 535 | GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ |
| 536 | GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ | 536 | GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ |
| 537 | GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \ | 537 | GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \ |
| 538 | GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \ | 538 | GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \ |
| @@ -1247,8 +1247,8 @@ static int verify_controller_parameters(struct pl022 *pl022, | |||
| 1247 | return -EINVAL; | 1247 | return -EINVAL; |
| 1248 | } | 1248 | } |
| 1249 | if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { | 1249 | if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { |
| 1250 | if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE) | 1250 | if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE) |
| 1251 | && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) { | 1251 | && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) { |
| 1252 | dev_err(chip_info->dev, | 1252 | dev_err(chip_info->dev, |
| 1253 | "Clock Phase is configured incorrectly\n"); | 1253 | "Clock Phase is configured incorrectly\n"); |
| 1254 | return -EINVAL; | 1254 | return -EINVAL; |
| @@ -1485,7 +1485,7 @@ static int pl022_setup(struct spi_device *spi) | |||
| 1485 | chip_info->data_size = SSP_DATA_BITS_12; | 1485 | chip_info->data_size = SSP_DATA_BITS_12; |
| 1486 | chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; | 1486 | chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; |
| 1487 | chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; | 1487 | chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; |
| 1488 | chip_info->clk_phase = SSP_CLK_FALLING_EDGE; | 1488 | chip_info->clk_phase = SSP_CLK_SECOND_EDGE; |
| 1489 | chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; | 1489 | chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; |
| 1490 | chip_info->ctrl_len = SSP_BITS_8; | 1490 | chip_info->ctrl_len = SSP_BITS_8; |
| 1491 | chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; | 1491 | chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; |
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 31dd56f0dae9..c8c2b693ffac 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c | |||
| @@ -1668,10 +1668,9 @@ static void pxa2xx_spi_shutdown(struct platform_device *pdev) | |||
| 1668 | } | 1668 | } |
| 1669 | 1669 | ||
| 1670 | #ifdef CONFIG_PM | 1670 | #ifdef CONFIG_PM |
| 1671 | 1671 | static int pxa2xx_spi_suspend(struct device *dev) | |
| 1672 | static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) | ||
| 1673 | { | 1672 | { |
| 1674 | struct driver_data *drv_data = platform_get_drvdata(pdev); | 1673 | struct driver_data *drv_data = dev_get_drvdata(dev); |
| 1675 | struct ssp_device *ssp = drv_data->ssp; | 1674 | struct ssp_device *ssp = drv_data->ssp; |
| 1676 | int status = 0; | 1675 | int status = 0; |
| 1677 | 1676 | ||
| @@ -1684,9 +1683,9 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) | |||
| 1684 | return 0; | 1683 | return 0; |
| 1685 | } | 1684 | } |
| 1686 | 1685 | ||
| 1687 | static int pxa2xx_spi_resume(struct platform_device *pdev) | 1686 | static int pxa2xx_spi_resume(struct device *dev) |
| 1688 | { | 1687 | { |
| 1689 | struct driver_data *drv_data = platform_get_drvdata(pdev); | 1688 | struct driver_data *drv_data = dev_get_drvdata(dev); |
| 1690 | struct ssp_device *ssp = drv_data->ssp; | 1689 | struct ssp_device *ssp = drv_data->ssp; |
| 1691 | int status = 0; | 1690 | int status = 0; |
| 1692 | 1691 | ||
| @@ -1703,26 +1702,29 @@ static int pxa2xx_spi_resume(struct platform_device *pdev) | |||
| 1703 | /* Start the queue running */ | 1702 | /* Start the queue running */ |
| 1704 | status = start_queue(drv_data); | 1703 | status = start_queue(drv_data); |
| 1705 | if (status != 0) { | 1704 | if (status != 0) { |
| 1706 | dev_err(&pdev->dev, "problem starting queue (%d)\n", status); | 1705 | dev_err(dev, "problem starting queue (%d)\n", status); |
| 1707 | return status; | 1706 | return status; |
| 1708 | } | 1707 | } |
| 1709 | 1708 | ||
| 1710 | return 0; | 1709 | return 0; |
| 1711 | } | 1710 | } |
| 1712 | #else | 1711 | |
| 1713 | #define pxa2xx_spi_suspend NULL | 1712 | static struct dev_pm_ops pxa2xx_spi_pm_ops = { |
| 1714 | #define pxa2xx_spi_resume NULL | 1713 | .suspend = pxa2xx_spi_suspend, |
| 1715 | #endif /* CONFIG_PM */ | 1714 | .resume = pxa2xx_spi_resume, |
| 1715 | }; | ||
| 1716 | #endif | ||
| 1716 | 1717 | ||
| 1717 | static struct platform_driver driver = { | 1718 | static struct platform_driver driver = { |
| 1718 | .driver = { | 1719 | .driver = { |
| 1719 | .name = "pxa2xx-spi", | 1720 | .name = "pxa2xx-spi", |
| 1720 | .owner = THIS_MODULE, | 1721 | .owner = THIS_MODULE, |
| 1722 | #ifdef CONFIG_PM | ||
| 1723 | .pm = &pxa2xx_spi_pm_ops, | ||
| 1724 | #endif | ||
| 1721 | }, | 1725 | }, |
| 1722 | .remove = pxa2xx_spi_remove, | 1726 | .remove = pxa2xx_spi_remove, |
| 1723 | .shutdown = pxa2xx_spi_shutdown, | 1727 | .shutdown = pxa2xx_spi_shutdown, |
| 1724 | .suspend = pxa2xx_spi_suspend, | ||
| 1725 | .resume = pxa2xx_spi_resume, | ||
| 1726 | }; | 1728 | }; |
| 1727 | 1729 | ||
| 1728 | static int __init pxa2xx_spi_init(void) | 1730 | static int __init pxa2xx_spi_init(void) |
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index b5294a9344de..f1c06202fdf2 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c | |||
| @@ -481,38 +481,47 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) | |||
| 481 | return 0; | 481 | return 0; |
| 482 | } | 482 | } |
| 483 | 483 | ||
| 484 | #ifdef CONFIG_PM | 484 | #ifdef CONFIG_PM |
| 485 | static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) | 485 | static int ohci_hcd_pxa27x_drv_suspend(struct device *dev) |
| 486 | { | 486 | { |
| 487 | struct usb_hcd *hcd = platform_get_drvdata(pdev); | 487 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 488 | struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); | 488 | struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); |
| 489 | 489 | ||
| 490 | if (time_before(jiffies, ohci->ohci.next_statechange)) | 490 | if (time_before(jiffies, ohci->ohci.next_statechange)) |
| 491 | msleep(5); | 491 | msleep(5); |
| 492 | ohci->ohci.next_statechange = jiffies; | 492 | ohci->ohci.next_statechange = jiffies; |
| 493 | 493 | ||
| 494 | pxa27x_stop_hc(ohci, &pdev->dev); | 494 | pxa27x_stop_hc(ohci, dev); |
| 495 | hcd->state = HC_STATE_SUSPENDED; | 495 | hcd->state = HC_STATE_SUSPENDED; |
| 496 | 496 | ||
| 497 | return 0; | 497 | return 0; |
| 498 | } | 498 | } |
| 499 | 499 | ||
| 500 | static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) | 500 | static int ohci_hcd_pxa27x_drv_resume(struct device *dev) |
| 501 | { | 501 | { |
| 502 | struct usb_hcd *hcd = platform_get_drvdata(pdev); | 502 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 503 | struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); | 503 | struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); |
| 504 | struct pxaohci_platform_data *inf = dev->platform_data; | ||
| 504 | int status; | 505 | int status; |
| 505 | 506 | ||
| 506 | if (time_before(jiffies, ohci->ohci.next_statechange)) | 507 | if (time_before(jiffies, ohci->ohci.next_statechange)) |
| 507 | msleep(5); | 508 | msleep(5); |
| 508 | ohci->ohci.next_statechange = jiffies; | 509 | ohci->ohci.next_statechange = jiffies; |
| 509 | 510 | ||
| 510 | if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0) | 511 | if ((status = pxa27x_start_hc(ohci, dev)) < 0) |
| 511 | return status; | 512 | return status; |
| 512 | 513 | ||
| 514 | /* Select Power Management Mode */ | ||
| 515 | pxa27x_ohci_select_pmm(ohci, inf->port_mode); | ||
| 516 | |||
| 513 | ohci_finish_controller_resume(hcd); | 517 | ohci_finish_controller_resume(hcd); |
| 514 | return 0; | 518 | return 0; |
| 515 | } | 519 | } |
| 520 | |||
| 521 | static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { | ||
| 522 | .suspend = ohci_hcd_pxa27x_drv_suspend, | ||
| 523 | .resume = ohci_hcd_pxa27x_drv_resume, | ||
| 524 | }; | ||
| 516 | #endif | 525 | #endif |
| 517 | 526 | ||
| 518 | /* work with hotplug and coldplug */ | 527 | /* work with hotplug and coldplug */ |
| @@ -522,13 +531,12 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { | |||
| 522 | .probe = ohci_hcd_pxa27x_drv_probe, | 531 | .probe = ohci_hcd_pxa27x_drv_probe, |
| 523 | .remove = ohci_hcd_pxa27x_drv_remove, | 532 | .remove = ohci_hcd_pxa27x_drv_remove, |
| 524 | .shutdown = usb_hcd_platform_shutdown, | 533 | .shutdown = usb_hcd_platform_shutdown, |
| 525 | #ifdef CONFIG_PM | ||
| 526 | .suspend = ohci_hcd_pxa27x_drv_suspend, | ||
| 527 | .resume = ohci_hcd_pxa27x_drv_resume, | ||
| 528 | #endif | ||
| 529 | .driver = { | 534 | .driver = { |
| 530 | .name = "pxa27x-ohci", | 535 | .name = "pxa27x-ohci", |
| 531 | .owner = THIS_MODULE, | 536 | .owner = THIS_MODULE, |
| 537 | #ifdef CONFIG_PM | ||
| 538 | .pm = &ohci_hcd_pxa27x_pm_ops, | ||
| 539 | #endif | ||
| 532 | }, | 540 | }, |
| 533 | }; | 541 | }; |
| 534 | 542 | ||
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index 93bb4340cc64..701a1081e199 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c | |||
| @@ -154,34 +154,38 @@ static int da903x_backlight_remove(struct platform_device *pdev) | |||
| 154 | } | 154 | } |
| 155 | 155 | ||
| 156 | #ifdef CONFIG_PM | 156 | #ifdef CONFIG_PM |
| 157 | static int da903x_backlight_suspend(struct platform_device *pdev, | 157 | static int da903x_backlight_suspend(struct device *dev) |
| 158 | pm_message_t state) | ||
| 159 | { | 158 | { |
| 159 | struct platform_device *pdev = to_platform_device(dev); | ||
| 160 | struct backlight_device *bl = platform_get_drvdata(pdev); | 160 | struct backlight_device *bl = platform_get_drvdata(pdev); |
| 161 | return da903x_backlight_set(bl, 0); | 161 | return da903x_backlight_set(bl, 0); |
| 162 | } | 162 | } |
| 163 | 163 | ||
| 164 | static int da903x_backlight_resume(struct platform_device *pdev) | 164 | static int da903x_backlight_resume(struct device *dev) |
| 165 | { | 165 | { |
| 166 | struct platform_device *pdev = to_platform_device(dev); | ||
| 166 | struct backlight_device *bl = platform_get_drvdata(pdev); | 167 | struct backlight_device *bl = platform_get_drvdata(pdev); |
| 167 | 168 | ||
| 168 | backlight_update_status(bl); | 169 | backlight_update_status(bl); |
| 169 | return 0; | 170 | return 0; |
| 170 | } | 171 | } |
| 171 | #else | 172 | |
| 172 | #define da903x_backlight_suspend NULL | 173 | static struct dev_pm_ops da903x_backlight_pm_ops = { |
| 173 | #define da903x_backlight_resume NULL | 174 | .suspend = da903x_backlight_suspend, |
| 175 | .resume = da903x_backlight_resume, | ||
| 176 | }; | ||
| 174 | #endif | 177 | #endif |
| 175 | 178 | ||
| 176 | static struct platform_driver da903x_backlight_driver = { | 179 | static struct platform_driver da903x_backlight_driver = { |
| 177 | .driver = { | 180 | .driver = { |
| 178 | .name = "da903x-backlight", | 181 | .name = "da903x-backlight", |
| 179 | .owner = THIS_MODULE, | 182 | .owner = THIS_MODULE, |
| 183 | #ifdef CONFIG_PM | ||
| 184 | .pm = &da903x_backlight_pm_ops, | ||
| 185 | #endif | ||
| 180 | }, | 186 | }, |
| 181 | .probe = da903x_backlight_probe, | 187 | .probe = da903x_backlight_probe, |
| 182 | .remove = da903x_backlight_remove, | 188 | .remove = da903x_backlight_remove, |
| 183 | .suspend = da903x_backlight_suspend, | ||
| 184 | .resume = da903x_backlight_resume, | ||
| 185 | }; | 189 | }; |
| 186 | 190 | ||
| 187 | static int __init da903x_backlight_init(void) | 191 | static int __init da903x_backlight_init(void) |
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 6506117c134b..1820c4a24434 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c | |||
| @@ -1638,24 +1638,26 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data) | |||
| 1638 | * Power management hooks. Note that we won't be called from IRQ context, | 1638 | * Power management hooks. Note that we won't be called from IRQ context, |
| 1639 | * unlike the blank functions above, so we may sleep. | 1639 | * unlike the blank functions above, so we may sleep. |
| 1640 | */ | 1640 | */ |
| 1641 | static int pxafb_suspend(struct platform_device *dev, pm_message_t state) | 1641 | static int pxafb_suspend(struct device *dev) |
| 1642 | { | 1642 | { |
| 1643 | struct pxafb_info *fbi = platform_get_drvdata(dev); | 1643 | struct pxafb_info *fbi = dev_get_drvdata(dev); |
| 1644 | 1644 | ||
| 1645 | set_ctrlr_state(fbi, C_DISABLE_PM); | 1645 | set_ctrlr_state(fbi, C_DISABLE_PM); |
| 1646 | return 0; | 1646 | return 0; |
| 1647 | } | 1647 | } |
| 1648 | 1648 | ||
| 1649 | static int pxafb_resume(struct platform_device *dev) | 1649 | static int pxafb_resume(struct device *dev) |
| 1650 | { | 1650 | { |
| 1651 | struct pxafb_info *fbi = platform_get_drvdata(dev); | 1651 | struct pxafb_info *fbi = dev_get_drvdata(dev); |
| 1652 | 1652 | ||
| 1653 | set_ctrlr_state(fbi, C_ENABLE_PM); | 1653 | set_ctrlr_state(fbi, C_ENABLE_PM); |
| 1654 | return 0; | 1654 | return 0; |
| 1655 | } | 1655 | } |
| 1656 | #else | 1656 | |
| 1657 | #define pxafb_suspend NULL | 1657 | static struct dev_pm_ops pxafb_pm_ops = { |
| 1658 | #define pxafb_resume NULL | 1658 | .suspend = pxafb_suspend, |
| 1659 | .resume = pxafb_resume, | ||
| 1660 | }; | ||
| 1659 | #endif | 1661 | #endif |
| 1660 | 1662 | ||
| 1661 | static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi) | 1663 | static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi) |
| @@ -2081,6 +2083,9 @@ static int __devinit pxafb_probe(struct platform_device *dev) | |||
| 2081 | goto failed; | 2083 | goto failed; |
| 2082 | } | 2084 | } |
| 2083 | 2085 | ||
| 2086 | if (cpu_is_pxa3xx() && inf->acceleration_enabled) | ||
| 2087 | fbi->fb.fix.accel = FB_ACCEL_PXA3XX; | ||
| 2088 | |||
| 2084 | fbi->backlight_power = inf->pxafb_backlight_power; | 2089 | fbi->backlight_power = inf->pxafb_backlight_power; |
| 2085 | fbi->lcd_power = inf->pxafb_lcd_power; | 2090 | fbi->lcd_power = inf->pxafb_lcd_power; |
| 2086 | 2091 | ||
| @@ -2091,14 +2096,14 @@ static int __devinit pxafb_probe(struct platform_device *dev) | |||
| 2091 | goto failed_fbi; | 2096 | goto failed_fbi; |
| 2092 | } | 2097 | } |
| 2093 | 2098 | ||
| 2094 | r = request_mem_region(r->start, r->end - r->start + 1, dev->name); | 2099 | r = request_mem_region(r->start, resource_size(r), dev->name); |
| 2095 | if (r == NULL) { | 2100 | if (r == NULL) { |
| 2096 | dev_err(&dev->dev, "failed to request I/O memory\n"); | 2101 | dev_err(&dev->dev, "failed to request I/O memory\n"); |
| 2097 | ret = -EBUSY; | 2102 | ret = -EBUSY; |
| 2098 | goto failed_fbi; | 2103 | goto failed_fbi; |
| 2099 | } | 2104 | } |
| 2100 | 2105 | ||
| 2101 | fbi->mmio_base = ioremap(r->start, r->end - r->start + 1); | 2106 | fbi->mmio_base = ioremap(r->start, resource_size(r)); |
| 2102 | if (fbi->mmio_base == NULL) { | 2107 | if (fbi->mmio_base == NULL) { |
| 2103 | dev_err(&dev->dev, "failed to map I/O memory\n"); | 2108 | dev_err(&dev->dev, "failed to map I/O memory\n"); |
| 2104 | ret = -EBUSY; | 2109 | ret = -EBUSY; |
| @@ -2197,7 +2202,7 @@ failed_free_dma: | |||
| 2197 | failed_free_io: | 2202 | failed_free_io: |
| 2198 | iounmap(fbi->mmio_base); | 2203 | iounmap(fbi->mmio_base); |
| 2199 | failed_free_res: | 2204 | failed_free_res: |
| 2200 | release_mem_region(r->start, r->end - r->start + 1); | 2205 | release_mem_region(r->start, resource_size(r)); |
| 2201 | failed_fbi: | 2206 | failed_fbi: |
| 2202 | clk_put(fbi->clk); | 2207 | clk_put(fbi->clk); |
| 2203 | platform_set_drvdata(dev, NULL); | 2208 | platform_set_drvdata(dev, NULL); |
| @@ -2237,7 +2242,7 @@ static int __devexit pxafb_remove(struct platform_device *dev) | |||
| 2237 | iounmap(fbi->mmio_base); | 2242 | iounmap(fbi->mmio_base); |
| 2238 | 2243 | ||
| 2239 | r = platform_get_resource(dev, IORESOURCE_MEM, 0); | 2244 | r = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| 2240 | release_mem_region(r->start, r->end - r->start + 1); | 2245 | release_mem_region(r->start, resource_size(r)); |
| 2241 | 2246 | ||
| 2242 | clk_put(fbi->clk); | 2247 | clk_put(fbi->clk); |
| 2243 | kfree(fbi); | 2248 | kfree(fbi); |
| @@ -2248,11 +2253,12 @@ static int __devexit pxafb_remove(struct platform_device *dev) | |||
| 2248 | static struct platform_driver pxafb_driver = { | 2253 | static struct platform_driver pxafb_driver = { |
| 2249 | .probe = pxafb_probe, | 2254 | .probe = pxafb_probe, |
| 2250 | .remove = __devexit_p(pxafb_remove), | 2255 | .remove = __devexit_p(pxafb_remove), |
| 2251 | .suspend = pxafb_suspend, | ||
| 2252 | .resume = pxafb_resume, | ||
| 2253 | .driver = { | 2256 | .driver = { |
| 2254 | .owner = THIS_MODULE, | 2257 | .owner = THIS_MODULE, |
| 2255 | .name = "pxa2xx-fb", | 2258 | .name = "pxa2xx-fb", |
| 2259 | #ifdef CONFIG_PM | ||
| 2260 | .pm = &pxafb_pm_ops, | ||
| 2261 | #endif | ||
| 2256 | }, | 2262 | }, |
| 2257 | }; | 2263 | }; |
| 2258 | 2264 | ||
diff --git a/arch/arm/include/asm/mach/mmc.h b/include/linux/amba/mmci.h index b490ecc79def..6b4241748dda 100644 --- a/arch/arm/include/asm/mach/mmc.h +++ b/include/linux/amba/mmci.h | |||
| @@ -1,17 +1,18 @@ | |||
| 1 | /* | 1 | /* |
| 2 | * arch/arm/include/asm/mach/mmc.h | 2 | * include/linux/amba/mmci.h |
| 3 | */ | 3 | */ |
| 4 | #ifndef ASMARM_MACH_MMC_H | 4 | #ifndef AMBA_MMCI_H |
| 5 | #define ASMARM_MACH_MMC_H | 5 | #define AMBA_MMCI_H |
| 6 | 6 | ||
| 7 | #include <linux/mmc/host.h> | 7 | #include <linux/mmc/host.h> |
| 8 | 8 | ||
| 9 | struct mmc_platform_data { | 9 | struct mmci_platform_data { |
| 10 | unsigned int ocr_mask; /* available voltages */ | 10 | unsigned int ocr_mask; /* available voltages */ |
| 11 | u32 (*translate_vdd)(struct device *, unsigned int); | 11 | u32 (*translate_vdd)(struct device *, unsigned int); |
| 12 | unsigned int (*status)(struct device *); | 12 | unsigned int (*status)(struct device *); |
| 13 | int gpio_wp; | 13 | int gpio_wp; |
| 14 | int gpio_cd; | 14 | int gpio_cd; |
| 15 | unsigned long capabilities; | ||
| 15 | }; | 16 | }; |
| 16 | 17 | ||
| 17 | #endif | 18 | #endif |
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index dcad0ffd1755..e4836c6b3dd7 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h | |||
| @@ -136,12 +136,12 @@ enum ssp_tx_level_trig { | |||
| 136 | 136 | ||
| 137 | /** | 137 | /** |
| 138 | * enum SPI Clock Phase - clock phase (Motorola SPI interface only) | 138 | * enum SPI Clock Phase - clock phase (Motorola SPI interface only) |
| 139 | * @SSP_CLK_RISING_EDGE: Receive data on rising edge | 139 | * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity) |
| 140 | * @SSP_CLK_FALLING_EDGE: Receive data on falling edge | 140 | * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity) |
| 141 | */ | 141 | */ |
| 142 | enum ssp_spi_clk_phase { | 142 | enum ssp_spi_clk_phase { |
| 143 | SSP_CLK_RISING_EDGE, | 143 | SSP_CLK_FIRST_EDGE, |
| 144 | SSP_CLK_FALLING_EDGE | 144 | SSP_CLK_SECOND_EDGE |
| 145 | }; | 145 | }; |
| 146 | 146 | ||
| 147 | /** | 147 | /** |
diff --git a/include/linux/fb.h b/include/linux/fb.h index f847df9e99b6..a34bdf5a9d23 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h | |||
| @@ -133,6 +133,7 @@ struct dentry; | |||
| 133 | #define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ | 133 | #define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ |
| 134 | #define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ | 134 | #define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ |
| 135 | #define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ | 135 | #define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ |
| 136 | #define FB_ACCEL_PXA3XX 99 /* PXA3xx */ | ||
| 136 | 137 | ||
| 137 | #define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ | 138 | #define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ |
| 138 | #define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ | 139 | #define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ |
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 4e34d19ddbc0..b4b48afb6de6 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c | |||
| @@ -137,9 +137,9 @@ static int pxa2xx_ac97_do_resume(struct snd_card *card) | |||
| 137 | return 0; | 137 | return 0; |
| 138 | } | 138 | } |
| 139 | 139 | ||
| 140 | static int pxa2xx_ac97_suspend(struct platform_device *dev, pm_message_t state) | 140 | static int pxa2xx_ac97_suspend(struct device *dev) |
| 141 | { | 141 | { |
| 142 | struct snd_card *card = platform_get_drvdata(dev); | 142 | struct snd_card *card = dev_get_drvdata(dev); |
| 143 | int ret = 0; | 143 | int ret = 0; |
| 144 | 144 | ||
| 145 | if (card) | 145 | if (card) |
| @@ -148,9 +148,9 @@ static int pxa2xx_ac97_suspend(struct platform_device *dev, pm_message_t state) | |||
| 148 | return ret; | 148 | return ret; |
| 149 | } | 149 | } |
| 150 | 150 | ||
| 151 | static int pxa2xx_ac97_resume(struct platform_device *dev) | 151 | static int pxa2xx_ac97_resume(struct device *dev) |
| 152 | { | 152 | { |
| 153 | struct snd_card *card = platform_get_drvdata(dev); | 153 | struct snd_card *card = dev_get_drvdata(dev); |
| 154 | int ret = 0; | 154 | int ret = 0; |
| 155 | 155 | ||
| 156 | if (card) | 156 | if (card) |
| @@ -159,9 +159,10 @@ static int pxa2xx_ac97_resume(struct platform_device *dev) | |||
| 159 | return ret; | 159 | return ret; |
| 160 | } | 160 | } |
| 161 | 161 | ||
| 162 | #else | 162 | static struct dev_pm_ops pxa2xx_ac97_pm_ops = { |
| 163 | #define pxa2xx_ac97_suspend NULL | 163 | .suspend = pxa2xx_ac97_suspend, |
| 164 | #define pxa2xx_ac97_resume NULL | 164 | .resume = pxa2xx_ac97_resume, |
| 165 | }; | ||
| 165 | #endif | 166 | #endif |
| 166 | 167 | ||
| 167 | static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) | 168 | static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) |
| @@ -241,11 +242,12 @@ static int __devexit pxa2xx_ac97_remove(struct platform_device *dev) | |||
| 241 | static struct platform_driver pxa2xx_ac97_driver = { | 242 | static struct platform_driver pxa2xx_ac97_driver = { |
| 242 | .probe = pxa2xx_ac97_probe, | 243 | .probe = pxa2xx_ac97_probe, |
| 243 | .remove = __devexit_p(pxa2xx_ac97_remove), | 244 | .remove = __devexit_p(pxa2xx_ac97_remove), |
| 244 | .suspend = pxa2xx_ac97_suspend, | ||
| 245 | .resume = pxa2xx_ac97_resume, | ||
| 246 | .driver = { | 245 | .driver = { |
| 247 | .name = "pxa2xx-ac97", | 246 | .name = "pxa2xx-ac97", |
| 248 | .owner = THIS_MODULE, | 247 | .owner = THIS_MODULE, |
| 248 | #ifdef CONFIG_PM | ||
| 249 | .pm = &pxa2xx_ac97_pm_ops, | ||
| 250 | #endif | ||
| 249 | }, | 251 | }, |
| 250 | }; | 252 | }; |
| 251 | 253 | ||