[ARM] pxa: move DMA registers definitions into <mach/dma.h>

1. Driver code where pxa_request_dma() is called will most likely
   reference DMA registers as well,  and it is really unnecessary
   to include pxa-regs.h just for this. Move the definitions into
   <mach/dma.h> and make relevant drivers include it instead of
   <mach/pxa-regs.h>.

2. Introduce DMAC_REGS_VIRT as the virtual address base for these
   DMA registers. This allows later processors to re-use the same
   IP while registers may start at different I/O address.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

3 files changed, 3 insertions, 3 deletions

diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 73cb6b4c2f2d..1dfdf66fb1f3 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -29,7 +29,7 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 #include <mach/regs-ssp.h>
 #include <mach/audio.h>
 #include <mach/ssp.h>
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 812c2b4d3e07..a4a655f7e304 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -20,8 +20,8 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ac97.h>
+#include <mach/dma.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 517991fb1099..223de890259e 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -24,7 +24,7 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>