Merge branch 'for-2.6.32' into for-2.6.33

2 files changed, 50 insertions, 50 deletions

diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index ac927ffdc961..97f1a251e446 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -7,15 +7,6 @@ config SND_BF5XX_I2S
           mode (supports single stereo In/Out).
           You will also need to select the audio interfaces to support below.
 
-config SND_BF5XX_TDM
-        tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
-        depends on (BLACKFIN && SND_SOC)
-        help
-          Say Y or M if you want to add support for codecs attached to
-          the Blackfin SPORT (synchronous serial ports) interface in TDM
-          mode.
-          You will also need to select the audio interfaces to support below.
-
 config SND_BF5XX_SOC_SSM2602
         tristate "SoC SSM2602 Audio support for BF52x ezkit"
         depends on SND_BF5XX_I2S
@@ -41,6 +32,31 @@ config SND_BFIN_AD73311_SE
           Enter the GPIO used to control AD73311's SE pin. Acceptable
           values are 0 to 7
 
+config SND_BF5XX_TDM
+        tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+        depends on (BLACKFIN && SND_SOC)
+        help
+          Say Y or M if you want to add support for codecs attached to
+          the Blackfin SPORT (synchronous serial ports) interface in TDM
+          mode.
+          You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_AD1836
+        tristate "SoC AD1836 Audio support for BF5xx"
+        depends on SND_BF5XX_TDM
+        select SND_BF5XX_SOC_TDM
+        select SND_SOC_AD1836
+        help
+          Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD1938
+        tristate "SoC AD1938 Audio support for Blackfin"
+        depends on SND_BF5XX_TDM
+        select SND_BF5XX_SOC_TDM
+        select SND_SOC_AD1938
+        help
+          Say Y if you want to add support for AD1938 codec on Blackfin.
+
 config SND_BF5XX_AC97
         tristate "SoC AC97 Audio for the ADI BF5xx chip"
         depends on BLACKFIN
@@ -71,6 +87,30 @@ config SND_BF5XX_MULTICHAN_SUPPORT
           Say y if you want AC97 driver to support up to 5.1 channel audio.
           this mode will consume much more memory for DMA.
 
+config SND_BF5XX_HAVE_COLD_RESET
+        bool "BOARD has COLD Reset GPIO"
+        depends on SND_BF5XX_AC97
+        default y if BFIN548_EZKIT
+        default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+        int "Set a GPIO for cold reset"
+        depends on SND_BF5XX_HAVE_COLD_RESET
+        range 0 159
+        default 19 if BFIN548_EZKIT
+        default 5 if BFIN537_STAMP
+        default 0
+        help
+          Set the correct GPIO for RESET the sound chip.
+
+config SND_BF5XX_SOC_AD1980
+        tristate "SoC AD1980/1 Audio support for BF5xx"
+        depends on SND_BF5XX_AC97
+        select SND_BF5XX_SOC_AC97
+        select SND_SOC_AD1980
+        help
+          Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
 config SND_BF5XX_SOC_SPORT
         tristate
 
@@ -88,30 +128,6 @@ config SND_BF5XX_SOC_AC97
         select SND_SOC_AC97_BUS
         select SND_BF5XX_SOC_SPORT
 
-config SND_BF5XX_SOC_AD1836
-        tristate "SoC AD1836 Audio support for BF5xx"
-        depends on SND_BF5XX_TDM
-        select SND_BF5XX_SOC_TDM
-        select SND_SOC_AD1836
-        help
-          Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1980
-        tristate "SoC AD1980/1 Audio support for BF5xx"
-        depends on SND_BF5XX_AC97
-        select SND_BF5XX_SOC_AC97
-        select SND_SOC_AD1980
-        help
-          Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1938
-        tristate "SoC AD1938 Audio support for Blackfin"
-        depends on SND_BF5XX_TDM
-        select SND_BF5XX_SOC_TDM
-        select SND_SOC_AD1938
-        help
-          Say Y if you want to add support for AD1938 codec on Blackfin.
-
 config SND_BF5XX_SPORT_NUM
         int "Set a SPORT for Sound chip"
         depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
@@ -120,19 +136,3 @@ config SND_BF5XX_SPORT_NUM
         default 0
         help
           Set the correct SPORT for sound chip.
-
-config SND_BF5XX_HAVE_COLD_RESET
-        bool "BOARD has COLD Reset GPIO"
-        depends on SND_BF5XX_AC97
-        default y if BFIN548_EZKIT
-        default n if !BFIN548_EZKIT
-
-config SND_BF5XX_RESET_GPIO_NUM
-        int "Set a GPIO for cold reset"
-        depends on SND_BF5XX_HAVE_COLD_RESET
-        range 0 159
-        default 19 if BFIN548_EZKIT
-        default 5 if BFIN537_STAMP
-        default 0
-        help
-          Set the correct GPIO for RESET the sound chip.
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 6375b4ea525d..dcb3181bb340 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -138,7 +138,7 @@ config SND_PXA2XX_SOC_MIOA701
 
 config SND_PXA2XX_SOC_IMOTE2
        tristate "SoC Audio support for IMote 2"
-       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 && I2C
        select SND_PXA2XX_SOC_I2S
        select SND_SOC_WM8940
        help