ASoC: wm2000: Always use a 4s timeout for the firmware

Rather than having varying timeouts depending on the transition always
use a 4s timeout. This provides better diagnostics for clocking errors
and ensures compatibility with current calibration firmwares.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 21 insertions, 38 deletions

diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index a75c3766aede..0418fa11e6bd 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -99,8 +99,9 @@ static void wm2000_reset(struct wm2000_priv *wm2000)
 }
 
 static int wm2000_poll_bit(struct i2c_client *i2c,
-                           unsigned int reg, u8 mask, int timeout)
+                           unsigned int reg, u8 mask)
 {
+        int timeout = 4000;
         int val;
 
         val = wm2000_read(i2c, reg);
@@ -119,7 +120,7 @@ static int wm2000_poll_bit(struct i2c_client *i2c,
 static int wm2000_power_up(struct i2c_client *i2c, int analogue)
 {
         struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-        int ret, timeout;
+        int ret;
 
         BUG_ON(wm2000->anc_mode != ANC_OFF);
 
@@ -140,13 +141,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
 
         /* Wait for ANC engine to become ready */
         if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
-                             WM2000_ANC_ENG_IDLE, 1)) {
+                             WM2000_ANC_ENG_IDLE)) {
                 dev_err(&i2c->dev, "ANC engine failed to reset\n");
                 return -ETIMEDOUT;
         }
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_BOOT_COMPLETE, 1)) {
+                             WM2000_STATUS_BOOT_COMPLETE)) {
                 dev_err(&i2c->dev, "ANC engine failed to initialise\n");
                 return -ETIMEDOUT;
         }
@@ -173,16 +174,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
         dev_dbg(&i2c->dev, "Download complete\n");
 
         if (analogue) {
-                timeout = 248;
-                wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+                wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
 
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_ANA_SEQ_INCLUDE |
                              WM2000_MODE_MOUSE_ENABLE |
                              WM2000_MODE_THERMAL_ENABLE);
         } else {
-                timeout = 10;
-
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_MOUSE_ENABLE |
                              WM2000_MODE_THERMAL_ENABLE);
@@ -201,9 +199,8 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
         wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
-                dev_err(&i2c->dev, "Timed out waiting for device after %dms\n",
-                        timeout * 10);
+                             WM2000_STATUS_MOUSE_ACTIVE)) {
+                dev_err(&i2c->dev, "Timed out waiting for device\n");
                 return -ETIMEDOUT;
         }
 
@@ -218,28 +215,25 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
 static int wm2000_power_down(struct i2c_client *i2c, int analogue)
 {
         struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-        int timeout;
 
         if (analogue) {
-                timeout = 248;
-                wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+                wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_ANA_SEQ_INCLUDE |
                              WM2000_MODE_POWER_DOWN);
         } else {
-                timeout = 10;
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_POWER_DOWN);
         }
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) {
+                             WM2000_STATUS_POWER_DOWN_COMPLETE)) {
                 dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
                 return -ETIMEDOUT;
         }
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
-                             WM2000_ANC_ENG_IDLE, 1)) {
+                             WM2000_ANC_ENG_IDLE)) {
                 dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
                 return -ETIMEDOUT;
         }
@@ -268,13 +262,13 @@ static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue)
         }
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_ANC_DISABLED, 10)) {
+                             WM2000_STATUS_ANC_DISABLED)) {
                 dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
                 return -ETIMEDOUT;
         }
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
-                             WM2000_ANC_ENG_IDLE, 1)) {
+                             WM2000_ANC_ENG_IDLE)) {
                 dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
                 return -ETIMEDOUT;
         }
@@ -311,7 +305,7 @@ static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
         wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_MOUSE_ACTIVE, 10)) {
+                             WM2000_STATUS_MOUSE_ACTIVE)) {
                 dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
                 return -ETIMEDOUT;
         }
@@ -325,38 +319,32 @@ static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
 static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
 {
         struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-        int timeout;
 
         BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
 
         if (analogue) {
-                timeout = 248;
-                wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+                wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
 
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_ANA_SEQ_INCLUDE |
                              WM2000_MODE_THERMAL_ENABLE |
                              WM2000_MODE_STANDBY_ENTRY);
         } else {
-                timeout = 10;
-
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_THERMAL_ENABLE |
                              WM2000_MODE_STANDBY_ENTRY);
         }
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_ANC_DISABLED, timeout)) {
+                             WM2000_STATUS_ANC_DISABLED)) {
                 dev_err(&i2c->dev,
                         "Timed out waiting for ANC disable after 1ms\n");
                 return -ETIMEDOUT;
         }
 
-        if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE,
-                             1)) {
+        if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
                 dev_err(&i2c->dev,
-                        "Timed out waiting for standby after %dms\n",
-                        timeout * 10);
+                        "Timed out waiting for standby\n");
                 return -ETIMEDOUT;
         }
 
@@ -374,23 +362,19 @@ static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
 static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
 {
         struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-        int timeout;
 
         BUG_ON(wm2000->anc_mode != ANC_STANDBY);
 
         wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
 
         if (analogue) {
-                timeout = 248;
-                wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+                wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
 
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_ANA_SEQ_INCLUDE |
                              WM2000_MODE_THERMAL_ENABLE |
                              WM2000_MODE_MOUSE_ENABLE);
         } else {
-                timeout = 10;
-
                 wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
                              WM2000_MODE_THERMAL_ENABLE |
                              WM2000_MODE_MOUSE_ENABLE);
@@ -400,9 +384,8 @@ static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
         wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
 
         if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-                             WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
-                dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n",
-                        timeout * 10);
+                             WM2000_STATUS_MOUSE_ACTIVE)) {
+                dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
                 return -ETIMEDOUT;
         }