ASoC: Provide CODEC clocking operations and API calls

When multi component systems use DAIless amplifiers which require clocking
configuration it is at best hard to use the current clocking API as this
requires a DAI even though the device may not even have one. Address this
by adding set_sysclk() and set_pll() operations and APIs for CODECs.

In order to avoid issues with devices which could be used either with or
without DAIs make the DAI variants call through to their CODEC counterparts
if there is no DAI specific operation. Converting over entirely would create
problems for multi-DAI devices which offer per-DAI clocking setup.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

1 files changed, 46 insertions, 0 deletions

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index c12f2bd23a4e..c2ec6cb05631 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3064,12 +3064,34 @@ int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 {
         if (dai->driver && dai->driver->ops->set_sysclk)
                 return dai->driver->ops->set_sysclk(dai, clk_id, freq, dir);
+        else if (dai->codec && dai->codec->driver->set_sysclk)
+                return dai->codec->driver->set_sysclk(dai->codec, clk_id,
+                                                      freq, dir);
         else
                 return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
 
 /**
+ * snd_soc_codec_set_sysclk - configure CODEC system or master clock.
+ * @codec: CODEC
+ * @clk_id: DAI specific clock ID
+ * @freq: new clock frequency in Hz
+ * @dir: new clock direction - input/output.
+ *
+ * Configures the CODEC master (MCLK) or system (SYSCLK) clocking.
+ */
+int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
+        unsigned int freq, int dir)
+{
+        if (codec->driver->set_sysclk)
+                return codec->driver->set_sysclk(codec, clk_id, freq, dir);
+        else
+                return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_set_sysclk);
+
+/**
  * snd_soc_dai_set_clkdiv - configure DAI clock dividers.
  * @dai: DAI
  * @div_id: DAI specific clock divider ID
@@ -3105,11 +3127,35 @@ int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
         if (dai->driver && dai->driver->ops->set_pll)
                 return dai->driver->ops->set_pll(dai, pll_id, source,
                                          freq_in, freq_out);
+        else if (dai->codec && dai->codec->driver->set_pll)
+                return dai->codec->driver->set_pll(dai->codec, pll_id, source,
+                                                   freq_in, freq_out);
         else
                 return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
 
+/*
+ * snd_soc_codec_set_pll - configure codec PLL.
+ * @codec: CODEC
+ * @pll_id: DAI specific PLL ID
+ * @source: DAI specific source for the PLL
+ * @freq_in: PLL input clock frequency in Hz
+ * @freq_out: requested PLL output clock frequency in Hz
+ *
+ * Configures and enables PLL to generate output clock based on input clock.
+ */
+int snd_soc_codec_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
+                          unsigned int freq_in, unsigned int freq_out)
+{
+        if (codec->driver->set_pll)
+                return codec->driver->set_pll(codec, pll_id, source,
+                                              freq_in, freq_out);
+        else
+                return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_set_pll);
+
 /**
  * snd_soc_dai_set_fmt - configure DAI hardware audio format.
  * @dai: DAI