[ALSA] usb-audio - SB Live24-External better handling

This patch improves support for 'SB Live 24-bit Extarnal' USB card.
1) This card can go into muted state when a headphones connected or
disconnected. So notify mixer about changes in headphone jack.
2) Add LED controls and procfs support just as in similar Audigy 2 NX card.
3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality:
the card may adjust microphone input level only.

Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

1 files changed, 28 insertions, 5 deletions

diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index 5e329690cfb1..1f1e91cee3fe 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -1703,6 +1703,11 @@ static void snd_usb_mixer_memory_change(struct usb_mixer_interface *mixer,
         case 19: /* speaker out jacks */
         case 20: /* headphones out jack */
                 break;
+        /* live24ext: 4 = line-in jack */
+        case 3: /* hp-out jack (may actuate Mute) */
+                if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040))
+                        snd_usb_mixer_notify_id(mixer, mixer->rc_cfg->mute_mixer_id);
+                break;
         default:
                 snd_printd(KERN_DEBUG "memory change in unknown unit %d\n", unitid);
                 break;
@@ -1951,6 +1956,9 @@ static int snd_audigy2nx_controls_create(struct usb_mixer_interface *mixer)
         int i, err;
 
         for (i = 0; i < ARRAY_SIZE(snd_audigy2nx_controls); ++i) {
+                if (i > 1 &&  /* Live24ext has 2 LEDs only */
+                        mixer->chip->usb_id == USB_ID(0x041e, 0x3040))
+                        break; 
                 err = snd_ctl_add(mixer->chip->card,
                                   snd_ctl_new1(&snd_audigy2nx_controls[i], mixer));
                 if (err < 0)
@@ -1963,28 +1971,42 @@ static int snd_audigy2nx_controls_create(struct usb_mixer_interface *mixer)
 static void snd_audigy2nx_proc_read(struct snd_info_entry *entry,
                                     struct snd_info_buffer *buffer)
 {
-        static const struct {
+        static const struct sb_jack {
                 int unitid;
                 const char *name;
-        } jacks[] = {
+        }  jacks_audigy2nx[] = {
                 {4,  "dig in "},
                 {7,  "line in"},
                 {19, "spk out"},
                 {20, "hph out"},
+                {-1, NULL}
+        }, jacks_live24ext[] = {
+                {4,  "line in"}, /* &1=Line, &2=Mic*/
+                {3,  "hph out"}, /* headphones */
+                {0,  "RC     "}, /* last command, 6 bytes see rc_config above */
+                {-1, NULL}
         };
+        const struct sb_jack *jacks;
         struct usb_mixer_interface *mixer = entry->private_data;
         int i, err;
         u8 buf[3];
 
         snd_iprintf(buffer, "%s jacks\n\n", mixer->chip->card->shortname);
-        for (i = 0; i < ARRAY_SIZE(jacks); ++i) {
+        if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020))
+                jacks = jacks_audigy2nx;
+        else if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040))
+                jacks = jacks_live24ext;
+        else
+                return;
+
+        for (i = 0; jacks[i].name; ++i) {
                 snd_iprintf(buffer, "%s: ", jacks[i].name);
                 err = snd_usb_ctl_msg(mixer->chip->dev,
                                       usb_rcvctrlpipe(mixer->chip->dev, 0),
                                       GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
                                       USB_RECIP_INTERFACE, 0,
                                       jacks[i].unitid << 8, buf, 3, 100);
-                if (err == 3 && buf[0] == 3)
+                if (err == 3 && (buf[0] == 3 || buf[0] == 6))
                         snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
                 else
                         snd_iprintf(buffer, "?\n");
@@ -2022,7 +2044,8 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif)
         if ((err = snd_usb_soundblaster_remote_init(mixer)) < 0)
                 goto _error;
 
-        if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020)) {
+        if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) ||
+            mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) {
                 struct snd_info_entry *entry;
 
                 if ((err = snd_audigy2nx_controls_create(mixer)) < 0)