ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards

Add core support for the range of S3C24XX Simtec boards with TLV320AIC23
CODECs on them. Since there are also boards with similar IIS routing the
AMP and the configuration code is placed in a core file for re-use with
other CODEC bindings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

5 files changed, 569 insertions, 0 deletions

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 2987239f1383..78cfd8d08e56 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -79,3 +79,15 @@ config SND_S3C24XX_SOC_S3C24XX_UDA134X
         select SND_S3C24XX_SOC_I2S
         select SND_SOC_L3
         select SND_SOC_UDA134X
+
+config SND_S3C24XX_SOC_SIMTEC
+        tristate
+        help
+          Internal node for common S3C24XX/Simtec suppor
+
+config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
+        tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
+        depends on SND_S3C24XX_SOC
+        select SND_S3C24XX_SOC_I2S
+        select SND_SOC_TLV320AIC23
+        select SND_S3C24XX_SOC_SIMTEC
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index eb219b016499..1ccbb877df3c 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -20,6 +20,8 @@ snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
 snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
 snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
 snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
+snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
+snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -27,3 +29,5 @@ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm87
 obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
 obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
 obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c
new file mode 100644
index 000000000000..1966e0d5652d
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.c
@@ -0,0 +1,394 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        ucontrol->value.integer.value[0] = spk_gain;
+        return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+        gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+        gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        int value = ucontrol->value.integer.value[0];
+
+        spk_gain = value;
+
+        if (!spk_unmute)
+                speaker_gain_set(value);
+
+        return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+        SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+                       speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+        pr_debug("%s: to=%d\n", __func__, to);
+
+        spk_unmute = to;
+        gpio_set_value(pdata->amp_gpio, to);
+
+        /* if we're umuting, also re-set the gain */
+        if (to && pdata->amp_gain[0] > 0)
+                speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        ucontrol->value.integer.value[0] = spk_unmute;
+        return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        spk_unmute_state(ucontrol->value.integer.value[0]);
+        return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+        SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+                       speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_codec *codec)
+{
+        if (pdata->amp_gpio > 0) {
+                pr_debug("%s: adding amp routes\n", __func__);
+
+                snd_soc_add_controls(codec, amp_unmute_controls,
+                                     ARRAY_SIZE(amp_unmute_controls));
+        }
+
+        if (pdata->amp_gain[0] > 0) {
+                pr_debug("%s: adding amp controls\n", __func__);
+                snd_soc_add_controls(codec, amp_gain_controls,
+                                     ARRAY_SIZE(amp_gain_controls));
+        }
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration  settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+                            struct snd_pcm_hw_params *params)
+{
+        struct snd_soc_pcm_runtime *rtd = substream->private_data;
+        struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+        struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+        int ret;
+
+        /* Set the CODEC as the bus clock master, I2S */
+        ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+                                  SND_SOC_DAIFMT_NB_NF |
+                                  SND_SOC_DAIFMT_CBM_CFM);
+        if (ret) {
+                pr_err("%s: failed set cpu dai format\n", __func__);
+                return ret;
+        }
+
+        /* Set the CODEC as the bus clock master */
+        ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+                                  SND_SOC_DAIFMT_NB_NF |
+                                  SND_SOC_DAIFMT_CBM_CFM);
+        if (ret) {
+                pr_err("%s: failed set codec dai format\n", __func__);
+                return ret;
+        }
+
+        ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+                                     CODEC_CLOCK, SND_SOC_CLOCK_IN);
+        if (ret) {
+                pr_err( "%s: failed setting codec sysclk\n", __func__);
+                return ret;
+        }
+
+        if (pdata->use_mpllin) {
+                ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+                                             0, SND_SOC_CLOCK_OUT);
+
+                if (ret) {
+                        pr_err("%s: failed to set MPLLin as clksrc\n",
+                               __func__);
+                        return ret;
+                }
+        }
+
+        if (pdata->output_cdclk) {
+                int cdclk_scale;
+
+                cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+                cdclk_scale--;
+
+                ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+                                             cdclk_scale);
+        }
+
+        return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+        /* call any board supplied startup code, this currently only
+         * covers the bast/vr1000 which have a CPLD in the way of the
+         * LRCLK */
+        if (pd->startup)
+                pd->startup();
+
+        return 0;
+}
+
+static struct snd_soc_ops simtec_snd_ops = {
+        .hw_params      = simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+                           struct s3c24xx_audio_simtec_pdata *pd)
+{
+        int ret;
+
+        /* attach gpio amp gain (if any) */
+        if (pdata->amp_gain[0] > 0) {
+                ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+                if (ret) {
+                        dev_err(dev, "cannot get amp gpio gain0\n");
+                        return ret;
+                }
+
+                ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+                if (ret) {
+                        dev_err(dev, "cannot get amp gpio gain1\n");
+                        gpio_free(pdata->amp_gain[0]);
+                        return ret;
+                }
+
+                gpio_direction_output(pd->amp_gain[0], 0);
+                gpio_direction_output(pd->amp_gain[1], 0);
+        }
+
+        /* note, curently we assume GPA0 isn't valid amp */
+        if (pdata->amp_gpio > 0) {
+                ret = gpio_request(pd->amp_gpio, "gpio-amp");
+                if (ret) {
+                        dev_err(dev, "cannot get amp gpio %d (%d)\n",
+                                pd->amp_gpio, ret);
+                        goto err_amp;
+                }
+
+                /* set the amp off at startup */
+                spk_unmute_state(0);
+        }
+
+        return 0;
+
+err_amp:
+        if (pd->amp_gain[0] > 0) {
+                gpio_free(pd->amp_gain[0]);
+                gpio_free(pd->amp_gain[1]);
+        }
+
+        return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+        if (pd->amp_gain[0] > 0) {
+                gpio_free(pd->amp_gain[0]);
+                gpio_free(pd->amp_gain[1]);
+        }
+
+        if (pd->amp_gpio > 0)
+                gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+int simtec_audio_resume(struct device *dev)
+{
+        simtec_call_startup(pdata);
+        return 0;
+}
+
+struct dev_pm_ops simtec_audio_pmops = {
+        .resume = simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int __devinit simtec_audio_core_probe(struct platform_device *pdev,
+                                      struct snd_soc_device *socdev)
+{
+        struct platform_device *snd_dev;
+        int ret;
+
+        socdev->card->dai_link->ops = &simtec_snd_ops;
+
+        pdata = pdev->dev.platform_data;
+        if (!pdata) {
+                dev_err(&pdev->dev, "no platform data supplied\n");
+                return -EINVAL;
+        }
+
+        simtec_call_startup(pdata);
+
+        xtal_clk = clk_get(&pdev->dev, "xtal");
+        if (IS_ERR(xtal_clk)) {
+                dev_err(&pdev->dev, "could not get clkout0\n");
+                return -EINVAL;
+        }
+
+        dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+        ret = attach_gpio_amp(&pdev->dev, pdata);
+        if (ret)
+                goto err_clk;
+
+        snd_dev = platform_device_alloc("soc-audio", -1);
+        if (!snd_dev) {
+                dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+                ret = -ENOMEM;
+                goto err_gpio;
+        }
+
+        platform_set_drvdata(snd_dev, socdev);
+        socdev->dev = &snd_dev->dev;
+
+        ret = platform_device_add(snd_dev);
+        if (ret) {
+                dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+                goto err_pdev;
+        }
+
+        platform_set_drvdata(pdev, snd_dev);
+        return 0;
+
+err_pdev:
+        platform_device_put(snd_dev);
+
+err_gpio:
+        detach_gpio_amp(pdata);
+
+err_clk:
+        clk_put(xtal_clk);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int __devexit simtec_audio_remove(struct platform_device *pdev)
+{
+        struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+        platform_device_unregister(snd_dev);
+
+        detach_gpio_amp(pdata);
+        clk_put(xtal_clk);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h
new file mode 100644
index 000000000000..2714203af161
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.h
@@ -0,0 +1,22 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void simtec_audio_init(struct snd_soc_codec *codec);
+
+extern int simtec_audio_core_probe(struct platform_device *pdev,
+                                   struct snd_soc_device *socdev);
+
+extern int simtec_audio_remove(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+extern struct dev_pm_ops simtec_audio_pmops;
+#define simtec_audio_pm &simtec_audio_pmops
+#else
+#define simtec_audio_pm NULL
+#endif
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
new file mode 100644
index 000000000000..25797e096175
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
@@ -0,0 +1,137 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic23.h"
+
+/* supported machines:
+ *
+ * Machine      Connections             AMP
+ * -------      -----------             ---
+ * BAST         MIC, HPOUT, LOUT, LIN   TPA2001D1 (HPOUTL,R) (gain hardwired)
+ * VR1000       HPOUT, LIN              None
+ * VR2000       LIN, LOUT, MIC, HP      LM4871 (HPOUTL,R)
+ * DePicture    LIN, LOUT, MIC, HP      LM4871 (HPOUTL,R)
+ * Anubis       LIN, LOUT, MIC, HP      TPA2001D1 (HPOUTL,R)
+ */
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+        SND_SOC_DAPM_HP("Headphone Jack", NULL),
+        SND_SOC_DAPM_LINE("Line In", NULL),
+        SND_SOC_DAPM_LINE("Line Out", NULL),
+        SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+        { "Headphone Jack", NULL, "LHPOUT"},
+        { "Headphone Jack", NULL, "RHPOUT"},
+
+        { "Line Out", NULL, "LOUT" },
+        { "Line Out", NULL, "ROUT" },
+
+        { "LLINEIN", NULL, "Line In"},
+        { "RLINEIN", NULL, "Line In"},
+
+        { "MICIN", NULL, "Mic Jack"},
+};
+
+/**
+ * simtec_tlv320aic23_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+        snd_soc_dapm_new_controls(codec, dapm_widgets,
+                                  ARRAY_SIZE(dapm_widgets));
+
+        snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+        snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+        snd_soc_dapm_enable_pin(codec, "Line In");
+        snd_soc_dapm_enable_pin(codec, "Line Out");
+        snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+        simtec_audio_init(codec);
+        snd_soc_dapm_sync(codec);
+
+        return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic23 = {
+        .name           = "tlv320aic23",
+        .stream_name    = "TLV320AIC23",
+        .cpu_dai        = &s3c24xx_i2s_dai,
+        .codec_dai      = &tlv320aic23_dai,
+        .init           = simtec_tlv320aic23_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic23 = {
+        .name           = "Simtec",
+        .platform       = &s3c24xx_soc_platform,
+        .dai_link       = &simtec_dai_aic23,
+        .num_links      = 1,
+};
+
+/* simtec audio subsystem */
+static struct snd_soc_device simtec_snd_devdata_aic23 = {
+        .card           = &snd_soc_machine_simtec_aic23,
+        .codec_dev      = &soc_codec_dev_tlv320aic23,
+};
+
+static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd)
+{
+        return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic23);
+}
+
+static struct platform_driver simtec_audio_tlv320aic23_platdrv = {
+        .driver = {
+                .owner  = THIS_MODULE,
+                .name   = "s3c24xx-simtec-tlv320aic23",
+                .pm     = simtec_audio_pm,
+        },
+        .probe  = simtec_audio_tlv320aic23_probe,
+        .remove = __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23");
+
+static int __init simtec_tlv320aic23_modinit(void)
+{
+        return platform_driver_register(&simtec_audio_tlv320aic23_platdrv);
+}
+
+static void __exit simtec_tlv320aic23_modexit(void)
+{
+        platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv);
+}
+
+module_init(simtec_tlv320aic23_modinit);
+module_exit(simtec_tlv320aic23_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");