ASoC: Stop WM8903 SYSCLK when suspending

This will save some additional power.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 6 insertions, 3 deletions

diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index c80968fe326e..bde74546db4a 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -997,6 +997,9 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 
         case SND_SOC_BIAS_STANDBY:
                 if (codec->bias_level == SND_SOC_BIAS_OFF) {
+                        wm8903_write(codec, WM8903_CLOCK_RATES_2,
+                                     WM8903_CLK_SYS_ENA);
+
                         wm8903_run_sequence(codec, 0);
                         wm8903_sync_reg_cache(codec, codec->reg_cache);
 
@@ -1027,6 +1030,9 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 
         case SND_SOC_BIAS_OFF:
                 wm8903_run_sequence(codec, 32);
+                reg = wm8903_read(codec, WM8903_CLOCK_RATES_2);
+                reg &= ~WM8903_CLK_SYS_ENA;
+                wm8903_write(codec, WM8903_CLOCK_RATES_2, reg);
                 break;
         }
 
@@ -1619,9 +1625,6 @@ static int wm8903_i2c_probe(struct i2c_client *i2c,
 
         wm8903_reset(codec);
 
-        /* SYSCLK is required for pretty much anything */
-        wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
-
         /* power on device */
         wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);