Merge tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for 3.6

This has been a pretty quiet release - very little activity in framework
terms, mostly just a few new drivers and updates:

- Added the ability to add and remove DAPM paths dynamically, mostly for
  reparenting on clock changes.
- New machine drivers for Marvell Brownstone, ST-Ericsson Ux500
  reference platform and ttc-dkp.
- New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP,
  Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF
- New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500, TI
  Isabelle and Wolfson Microelectronics WM5102 and WM5110

1 files changed, 26 insertions, 1 deletions

diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 08c7f6685ff0..6db3c41b0163 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -13,7 +13,7 @@
 #define _AIC3X_H
 
 /* AIC3X register space */
-#define AIC3X_CACHEREGNUM               103
+#define AIC3X_CACHEREGNUM               110
 
 /* Page select register */
 #define AIC3X_PAGE_SELECT               0
@@ -74,6 +74,8 @@
 #define HPLCOM_CFG                      37
 /* Right High Power Output control registers */
 #define HPRCOM_CFG                      38
+/* High Power Output Stage Control Register */
+#define HPOUT_SC                        40
 /* DAC Output Switching control registers */
 #define DAC_LINE_MUX                    41
 /* High Power Output Driver Pop Reduction registers */
@@ -148,6 +150,17 @@
 #define AIC3X_GPIOB_REG                 101
 /* Clock generation control register */
 #define AIC3X_CLKGEN_CTRL_REG           102
+/* New AGC registers */
+#define LAGCN_ATTACK                    103
+#define LAGCN_DECAY                     104
+#define RAGCN_ATTACK                    105
+#define RAGCN_DECAY                     106
+/* New Programmable ADC Digital Path and I2C Bus Condition Register */
+#define NEW_ADC_DIGITALPATH             107
+/* Passive Analog Signal Bypass Selection During Powerdown Register */
+#define PASSIVE_BYPASS                  108
+/* DAC Quiescent Current Adjustment Register */
+#define DAC_ICC_ADJ                     109
 
 /* Page select register bits */
 #define PAGE0_SELECT            0
@@ -163,6 +176,10 @@
 #define DUAL_RATE_MODE          ((1 << 5) | (1 << 6))
 #define LDAC2LCH                (0x1 << 3)
 #define RDAC2RCH                (0x1 << 1)
+#define LDAC2RCH                (0x2 << 3)
+#define RDAC2LCH                (0x2 << 1)
+#define LDAC2MONOMIX            (0x3 << 3)
+#define RDAC2MONOMIX            (0x3 << 1)
 
 /* PLL registers bitfields */
 #define PLLP_SHIFT              0
@@ -179,6 +196,14 @@
 #define PLL_CLKIN_SHIFT         4
 #define MCLK_SOURCE             0x0
 #define PLL_CLKDIV_SHIFT        0
+#define PLLCLK_IN_MASK          0x30
+#define PLLCLK_IN_SHIFT         4
+#define CLKDIV_IN_MASK          0xc0
+#define CLKDIV_IN_SHIFT         6
+/* clock in source */
+#define CLKIN_MCLK              0
+#define CLKIN_GPIO2             1
+#define CLKIN_BCLK              2
 
 /* Software reset register bits */
 #define SOFT_RESET              0x80