[ALSA] ymfpci: change timer resolution to 48 kHz

Modules: YMFPCI driver

We better pretend that the ymfpci timer runs at 48 kHz because the
interrupt frequency cannot be higher, and clients that would try to
use 96 kHz would run at half their desired speed.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

1 files changed, 4 insertions, 6 deletions

diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index c0aaade772d4..d27f3b56b513 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -1851,9 +1851,7 @@ static int snd_ymfpci_timer_start(snd_timer_t *timer)
         unsigned int count;
 
         chip = snd_timer_chip(timer);
-        count = timer->sticks - 1;
-        if (count == 0) /* minimum time is 20.8 us */
-                count = 1;
+        count = (timer->sticks << 1) - 1;
         spin_lock_irqsave(&chip->reg_lock, flags);
         snd_ymfpci_writew(chip, YDSXGR_TIMERCOUNT, count);
         snd_ymfpci_writeb(chip, YDSXGR_TIMERCTRL, 0x03);
@@ -1877,14 +1875,14 @@ static int snd_ymfpci_timer_precise_resolution(snd_timer_t *timer,
                                                unsigned long *num, unsigned long *den)
 {
         *num = 1;
-        *den = 96000;
+        *den = 48000;
         return 0;
 }
 
 static struct _snd_timer_hardware snd_ymfpci_timer_hw = {
         .flags = SNDRV_TIMER_HW_AUTO,
-        .resolution = 10417, /* 1/2fs = 10.41666...us */
-        .ticks = 65536,
+        .resolution = 20833, /* 1/fs = 20.8333...us */
+        .ticks = 0x8000,
         .start = snd_ymfpci_timer_start,
         .stop = snd_ymfpci_timer_stop,
         .precise_resolution = snd_ymfpci_timer_precise_resolution,