[ALSA] hdsp - Add DDS register support for RME9632 rev >= 152

Add DDS register support for RME9632 rev >= 152.
This register sets the sample rate for these cards and is required
in addition to the standard control register. It corresponds to a
quartz divisor.

Signed-off-by: Remy Bruno <remy.bruno@trinnov.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

1 files changed, 36 insertions, 0 deletions

diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 849ffe4aa5ca..89b3c7ff5037 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -80,6 +80,7 @@ MODULE_SUPPORTED_DEVICE("{{RME Hammerfall-DSP},"
 /* Write registers. These are defined as byte-offsets from the iobase value.
  */
 #define HDSP_resetPointer               0
+#define HDSP_freqReg                    0
 #define HDSP_outputBufferAddress        32
 #define HDSP_inputBufferAddress         36
 #define HDSP_controlRegister            64
@@ -469,6 +470,7 @@ struct hdsp {
         struct pci_dev       *pci;
         struct snd_kcontrol *spdif_ctl;
         unsigned short        mixer_matrix[HDSP_MATRIX_MIXER_SIZE];
+        unsigned int          dds_value; /* last value written to freq register */
 };
 
 /* These tables map the ALSA channels 1..N to the channels that we
@@ -940,6 +942,11 @@ static snd_pcm_uframes_t hdsp_hw_pointer(struct hdsp *hdsp)
 static void hdsp_reset_hw_pointer(struct hdsp *hdsp)
 {
         hdsp_write (hdsp, HDSP_resetPointer, 0);
+        if (hdsp->io_type == H9632 && hdsp->firmware_rev >= 152)
+                /* HDSP_resetPointer = HDSP_freqReg, which is strange and
+                 * requires (?) to write again DDS value after a reset pointer
+                 * (at least, it works like this) */
+                hdsp_write (hdsp, HDSP_freqReg, hdsp->dds_value);
 }
 
 static void hdsp_start_audio(struct hdsp *s)
@@ -984,6 +991,30 @@ static int hdsp_set_interrupt_interval(struct hdsp *s, unsigned int frames)
         return 0;
 }
 
+static void hdsp_set_dds_value(struct hdsp *hdsp, int rate)
+{
+        u64 n;
+        u32 r;
+        
+        if (rate >= 112000)
+                rate /= 4;
+        else if (rate >= 56000)
+                rate /= 2;
+
+        /* RME says n = 104857600000000, but in the windows MADI driver, I see:
+//      return 104857600000000 / rate; // 100 MHz
+        return 110100480000000 / rate; // 105 MHz
+        */         
+        n = 104857600000000ULL;  /*  =  2^20 * 10^8 */
+        div64_32(&n, rate, &r);
+        /* n should be less than 2^32 for being written to FREQ register */
+        snd_assert((n >> 32) == 0);
+        /* HDSP_freqReg and HDSP_resetPointer are the same, so keep the DDS
+           value to write it after a reset */
+        hdsp->dds_value = n;
+        hdsp_write(hdsp, HDSP_freqReg, hdsp->dds_value);
+}
+
 static int hdsp_set_rate(struct hdsp *hdsp, int rate, int called_internally)
 {
         int reject_if_open = 0;
@@ -1092,6 +1123,10 @@ static int hdsp_set_rate(struct hdsp *hdsp, int rate, int called_internally)
         hdsp->control_register |= rate_bits;
         hdsp_write(hdsp, HDSP_controlRegister, hdsp->control_register);
 
+        /* For HDSP9632 rev 152, need to set DDS value in FREQ register */
+        if (hdsp->io_type == H9632 && hdsp->firmware_rev >= 152)
+                hdsp_set_dds_value(hdsp, rate);
+
         if (rate >= 128000) {
                 hdsp->channel_map = channel_map_H9632_qs;
         } else if (rate > 48000) {
@@ -4945,6 +4980,7 @@ static int __devinit snd_hdsp_create(struct snd_card *card,
         hdsp->irq = pci->irq;
         hdsp->precise_ptr = 0;
         hdsp->use_midi_tasklet = 1;
+        hdsp->dds_value = 0;
 
         if ((err = snd_hdsp_initialize_memory(hdsp)) < 0)
                 return err;