[ALSA] HDA/ALC260: 2/7 - switch pin buffer enables

Modules: HDA Codec driver

This patch adds functionality which switches the input/output buffer enables
of retasking pins when the user changes their mode with the mode control.
This probably reduces noise *slightly* for recording compared to the case
where both input and output buffers were enabled simultaneously.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 38 insertions, 20 deletions

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b34d2448d172..600d0a037842 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -306,9 +306,32 @@ static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_v
                 val = alc_pin_mode_min(dir);
 
         change = pinctl != alc_pin_mode_values[val];
-        if (change)
+        if (change) {
+                /* Set pin mode to that requested */
                 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL,
                         alc_pin_mode_values[val]);
+
+                /* Also enable the retasking pin's input/output as required 
+                 * for the requested pin mode.  Enum values of 2 or less are
+                 * input modes.
+                 *
+                 * Dynamically switching the input/output buffers probably
+                 * reduces noise slightly, particularly on input.  However,
+                 * havingboth input and output buffers enabled
+                 * simultaneously doesn't seem to be problematic.
+                 */
+                if (val <= 2) {
+                        snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+                                AMP_OUT_MUTE);
+                        snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+                                AMP_IN_UNMUTE(0));
+                } else {
+                        snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+                                AMP_IN_MUTE(0));
+                        snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
+                                AMP_OUT_UNMUTE);
+                }
+        }
         return change;
 }
 
@@ -2744,14 +2767,16 @@ static struct hda_verb alc260_fujitsu_init_verbs[] = {
 
         /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
         {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-        /* Unmute Line1 pin widget amp left and right (no equiv mixer ctrl) */
+        /* Unmute Line1 pin widget output buffer since it starts as an output.
+         * If the pin mode is changed by the user the pin mode control will
+         * take care of enabling the pin's input/output buffers as needed.
+         * Therefore there's no need to enable the input buffer at this
+         * stage.
+         */
         {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-        /* Unmute Line1 pin widget input for when this pin is used as input
-         * (no equiv mixer ctrl).  Having input and output unmuted doesn't
-         * seem to cause a problem.
-         */
-        {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-        /* Unmute pin widget used for Line-in (no equiv mixer ctrl) */
+        /* Unmute input buffer of pin widget used for Line-in (no equiv 
+         * mixer ctrl)
+         */
         {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 
         /* Mute capture amp left and right */
@@ -2882,7 +2907,11 @@ static struct hda_verb alc260_test_init_verbs[] = {
         {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
         {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 
-        /* Unmute retasking pin widget output amp left/right (no mixer ctrl) */
+        /* Unmute retasking pin widget output buffers since the default
+         * state appears to be output.  As the pin mode is changed by the
+         * user the pin mode control will take care of enabling the pin's
+         * input/output buffers as needed.
+         */
         {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
         {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
         {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -2892,17 +2921,6 @@ static struct hda_verb alc260_test_init_verbs[] = {
         /* Also unmute the mono-out pin widget */
         {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 
-        /* Also unmute the retasking pin input amps.  Having the input and
-         * output amps unmuted at the same time doesn't appear to cause any
-         * trouble.
-         */
-        {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-        {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-        {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-        {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-        {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-        {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
         /* Mute capture amp left and right */
         {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
         /* Set ADC connection select to match default mixer setting - line