Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa

* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] echoaudio - Remove kfree_nocheck()
  [ALSA] echoaudio - Fix Makefile
  [ALSA] Add Intel D965 board support
  [ALSA] Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecs
  [ALSA] Fix a typo in echoaudio/midi.c
  [ALSA] snd-aoa: enable dual-edge in GPIOs
  [ALSA] snd-aoa: support iMac G5 iSight
  [ALSA] snd-aoa: not experimental
  [ALSA] Add echoaudio sound drivers
  [ALSA] ak4xxx-adda - Code clean-up
  [ALSA] Remove CONFIG_EXPERIMENTAL from intel8x0m driver
  [ALSA] Stereo controls for M-Audio Revolution cards
  [ALSA] Fix misuse of __list_add() in seq_ports.c
  [ALSA] hda-codec - Add model entry for Samsung X60 Chane
  [ALSA] make CONFIG_SND_DYNAMIC_MINORS non-experimental
  [ALSA] Fix wrong dependencies of snd-aoa driver
  [ALSA] fix build failure due to snd-aoa
  [ALSA] AD1888 mixer controls for DC mode
  [ALSA] Suppress irq handler mismatch messages in ALSA ISA drivers
  [ALSA] usb-audio support for Turtle Beach Roadie

1 files changed, 590 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/echoaudio.h b/sound/pci/echoaudio/echoaudio.h
new file mode 100644
index 000000000000..7e88c968e22f
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio.h
@@ -0,0 +1,590 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+ ****************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+ ****************************************************************************
+
+
+   Here's a block diagram of how most of the cards work:
+
+                  +-----------+
+           record |           |<-------------------- Inputs
+          <-------|           |        |
+     PCI          | Transport |        |
+     bus          |  engine   |       \|/
+          ------->|           |    +-------+
+            play  |           |--->|monitor|-------> Outputs
+                  +-----------+    | mixer |
+                                   +-------+
+
+   The lines going to and from the PCI bus represent "pipes".  A pipe performs
+   audio transport - moving audio data to and from buffers on the host via
+   bus mastering.
+
+   The inputs and outputs on the right represent input and output "busses."
+   A bus is a physical, real connection to the outside world.  An example
+   of a bus would be the 1/4" analog connectors on the back of Layla or
+   an RCA S/PDIF connector.
+
+   For most cards, there is a one-to-one correspondence between outputs
+   and busses; that is, each individual pipe is hard-wired to a single bus.
+
+   Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
+   Layla24, Mona, and Indigo.
+
+
+   Mia has a feature called "virtual outputs."
+
+
+                  +-----------+
+           record |           |<----------------------------- Inputs
+          <-------|           |                  |
+     PCI          | Transport |                  |
+     bus          |  engine   |                 \|/
+          ------->|           |   +------+   +-------+
+            play  |           |-->|vmixer|-->|monitor|-------> Outputs
+                  +-----------+   +------+   | mixer |
+                                             +-------+
+
+
+   Obviously, the difference here is the box labeled "vmixer."  Vmixer is
+   short for "virtual output mixer."  For Mia, pipes are *not* hard-wired
+   to a single bus; the vmixer lets you mix any pipe to any bus in any
+   combination.
+
+   Note, however, that the left-hand side of the diagram is unchanged.
+   Transport works exactly the same way - the difference is in the mixer stage.
+
+
+   Pipes and busses are numbered starting at zero.
+
+
+
+   Pipe index
+   ==========
+
+   A number of calls in CEchoGals refer to a "pipe index".  A pipe index is
+   a unique number for a pipe that unambiguously refers to a playback or record
+   pipe.  Pipe indices are numbered starting with analog outputs, followed by
+   digital outputs, then analog inputs, then digital inputs.
+
+   Take Gina24 as an example:
+
+   Pipe index
+
+   0-7            Analog outputs (0 .. FirstDigitalBusOut-1)
+   8-15           Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
+   16-17          Analog inputs
+   18-25          Digital inputs
+
+
+   You get the pipe index by calling CEchoGals::OpenAudio; the other transport
+   functions take the pipe index as a parameter.  If you need a pipe index for
+   some other reason, use the handy Makepipe_index method.
+
+
+   Some calls take a CChannelMask parameter; CChannelMask is a handy way to
+   group pipe indices.
+
+
+
+   Digital mode switch
+   ===================
+
+   Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
+   or DMS.  Cards with a DMS can be set to one of three mutually exclusive
+   digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
+
+   This may create some confusion since ADAT optical is 8 channels wide and
+   S/PDIF is only two channels wide.  Gina24, Layla24, and Mona handle this
+   by acting as if they always have 8 digital outs and ins.  If you are in
+   either S/PDIF mode, the last 6 channels don't do anything - data sent
+   out these channels is thrown away and you will always record zeros.
+
+   Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
+   only available if you have the card configured for S/PDIF optical or S/PDIF
+   RCA.
+
+
+
+   Double speed mode
+   =================
+
+   Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
+   Layla24, Mona, Mia, and Indigo).  For these cards, the driver sometimes has
+   to worry about "double speed mode"; double speed mode applies whenever the
+   sampling rate is above 50 kHz.
+
+   For instance, Mona and Layla24 support word clock sync.  However, they
+   actually support two different word clock modes - single speed (below
+   50 kHz) and double speed (above 50 kHz).  The hardware detects if a single
+   or double speed word clock signal is present; the generic code uses that
+   information to determine which mode to use.
+
+   The generic code takes care of all this for you.
+*/
+
+
+#ifndef _ECHOAUDIO_H_
+#define _ECHOAUDIO_H_
+
+
+#define TRUE 1
+#define FALSE 0
+
+#include "echoaudio_dsp.h"
+
+
+
+/***********************************************************************
+
+        PCI configuration space
+
+***********************************************************************/
+
+/*
+ * PCI vendor ID and device IDs for the hardware
+ */
+#define VENDOR_ID               0x1057
+#define DEVICE_ID_56301         0x1801
+#define DEVICE_ID_56361         0x3410
+#define SUBVENDOR_ID            0xECC0
+
+
+/*
+ * Valid Echo PCI subsystem card IDs
+ */
+#define DARLA20                 0x0010
+#define GINA20                  0x0020
+#define LAYLA20                 0x0030
+#define DARLA24                 0x0040
+#define GINA24                  0x0050
+#define LAYLA24                 0x0060
+#define MONA                    0x0070
+#define MIA                     0x0080
+#define INDIGO                  0x0090
+#define INDIGO_IO               0x00a0
+#define INDIGO_DJ               0x00b0
+#define ECHO3G                  0x0100
+
+
+/************************************************************************
+
+        Array sizes and so forth
+
+***********************************************************************/
+
+/*
+ * Sizes
+ */
+#define ECHO_MAXAUDIOINPUTS     32      /* Max audio input channels */
+#define ECHO_MAXAUDIOOUTPUTS    32      /* Max audio output channels */
+#define ECHO_MAXAUDIOPIPES      32      /* Max number of input and output
+                                         * pipes */
+#define E3G_MAX_OUTPUTS         16
+#define ECHO_MAXMIDIJACKS       1       /* Max MIDI ports */
+#define ECHO_MIDI_QUEUE_SZ      512     /* Max MIDI input queue entries */
+#define ECHO_MTC_QUEUE_SZ       32      /* Max MIDI time code input queue
+                                         * entries */
+
+/*
+ * MIDI activity indicator timeout
+ */
+#define MIDI_ACTIVITY_TIMEOUT_USEC      200000
+
+
+/****************************************************************************
+ 
+   Clocks
+
+*****************************************************************************/
+
+/*
+ * Clock numbers
+ */
+#define ECHO_CLOCK_INTERNAL             0
+#define ECHO_CLOCK_WORD                 1
+#define ECHO_CLOCK_SUPER                2
+#define ECHO_CLOCK_SPDIF                3
+#define ECHO_CLOCK_ADAT                 4
+#define ECHO_CLOCK_ESYNC                5
+#define ECHO_CLOCK_ESYNC96              6
+#define ECHO_CLOCK_MTC                  7
+#define ECHO_CLOCK_NUMBER               8
+#define ECHO_CLOCKS                     0xffff
+
+/*
+ * Clock bit numbers - used to report capabilities and whatever clocks
+ * are being detected dynamically.
+ */
+#define ECHO_CLOCK_BIT_INTERNAL         (1 << ECHO_CLOCK_INTERNAL)
+#define ECHO_CLOCK_BIT_WORD             (1 << ECHO_CLOCK_WORD)
+#define ECHO_CLOCK_BIT_SUPER            (1 << ECHO_CLOCK_SUPER)
+#define ECHO_CLOCK_BIT_SPDIF            (1 << ECHO_CLOCK_SPDIF)
+#define ECHO_CLOCK_BIT_ADAT             (1 << ECHO_CLOCK_ADAT)
+#define ECHO_CLOCK_BIT_ESYNC            (1 << ECHO_CLOCK_ESYNC)
+#define ECHO_CLOCK_BIT_ESYNC96          (1 << ECHO_CLOCK_ESYNC96)
+#define ECHO_CLOCK_BIT_MTC              (1<<ECHO_CLOCK_MTC)
+
+
+/***************************************************************************
+
+   Digital modes
+
+****************************************************************************/
+
+/*
+ * Digital modes for Mona, Layla24, and Gina24
+ */
+#define DIGITAL_MODE_NONE                       0xFF
+#define DIGITAL_MODE_SPDIF_RCA                  0
+#define DIGITAL_MODE_SPDIF_OPTICAL              1
+#define DIGITAL_MODE_ADAT                       2
+#define DIGITAL_MODE_SPDIF_CDROM                3
+#define DIGITAL_MODES                           4
+
+/*
+ * Digital mode capability masks
+ */
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA     (1 << DIGITAL_MODE_SPDIF_RCA)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL)
+#define ECHOCAPS_HAS_DIGITAL_MODE_ADAT          (1 << DIGITAL_MODE_ADAT)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM   (1 << DIGITAL_MODE_SPDIF_CDROM)
+
+
+#define EXT_3GBOX_NC                    0x01    /* 3G box not connected */
+#define EXT_3GBOX_NOT_SET               0x02    /* 3G box not detected yet */
+
+
+#define ECHOGAIN_MUTED          (-128)  /* Minimum possible gain */
+#define ECHOGAIN_MINOUT         (-128)  /* Min output gain (dB) */
+#define ECHOGAIN_MAXOUT         (6)     /* Max output gain (dB) */
+#define ECHOGAIN_MININP         (-50)   /* Min input gain (0.5 dB) */
+#define ECHOGAIN_MAXINP         (50)    /* Max input gain (0.5 dB) */
+
+#define PIPE_STATE_STOPPED      0       /* Pipe has been reset */
+#define PIPE_STATE_PAUSED       1       /* Pipe has been stopped */
+#define PIPE_STATE_STARTED      2       /* Pipe has been started */
+#define PIPE_STATE_PENDING      3       /* Pipe has pending start */
+
+
+/* Debug initialization */
+#ifdef CONFIG_SND_DEBUG
+#define DE_INIT(x) snd_printk x
+#else
+#define DE_INIT(x)
+#endif
+
+/* Debug hw_params callbacks */
+#ifdef CONFIG_SND_DEBUG
+#define DE_HWP(x) snd_printk x
+#else
+#define DE_HWP(x)
+#endif
+
+/* Debug normal activity (open, start, stop...) */
+#ifdef CONFIG_SND_DEBUG
+#define DE_ACT(x) snd_printk x
+#else
+#define DE_ACT(x)
+#endif
+
+/* Debug midi activity */
+#ifdef CONFIG_SND_DEBUG
+#define DE_MID(x) snd_printk x
+#else
+#define DE_MID(x)
+#endif
+
+
+struct audiopipe {
+        volatile u32 *dma_counter;      /* Commpage register that contains
+                                         * the current dma position
+                                         * (lower 32 bits only)
+                                         */
+        u32 last_counter;               /* The last position, which is used
+                                         * to compute...
+                                         */
+        u32 position;                   /* ...the number of bytes tranferred
+                                         * by the DMA engine, modulo the
+                                         * buffer size
+                                         */
+        short index;                    /* Index of the first channel or <0
+                                         * if hw is not configured yet
+                                         */
+        short interleave;
+        struct snd_dma_buffer sgpage;   /* Room for the scatter-gather list */
+        struct snd_pcm_hardware hw;
+        struct snd_pcm_hw_constraint_list constr;
+        short sglist_head;
+        char state;                     /* pipe state */
+};
+
+
+struct audioformat {
+        u8 interleave;                  /* How the data is arranged in memory:
+                                         * mono = 1, stereo = 2, ...
+                                         */
+        u8 bits_per_sample;             /* 8, 16, 24, 32 (24 bits left aligned) */
+        char mono_to_stereo;            /* Only used if interleave is 1 and
+                                         * if this is an output pipe.
+                                         */
+        char data_are_bigendian;        /* 1 = big endian, 0 = little endian */
+};
+
+
+struct echoaudio {
+        spinlock_t lock;
+        struct snd_pcm_substream *substream[DSP_MAXPIPES];
+        int last_period[DSP_MAXPIPES];
+        struct semaphore mode_mutex;
+        u16 num_digital_modes, digital_mode_list[6];
+        u16 num_clock_sources, clock_source_list[10];
+        atomic_t opencount;
+        struct snd_kcontrol *clock_src_ctl;
+        struct snd_pcm *analog_pcm, *digital_pcm;
+        struct snd_card *card;
+        const char *card_name;
+        struct pci_dev *pci;
+        unsigned long dsp_registers_phys;
+        struct resource *iores;
+        struct snd_dma_buffer commpage_dma_buf;
+        int irq;
+#ifdef ECHOCARD_HAS_MIDI
+        struct snd_rawmidi *rmidi;
+        struct snd_rawmidi_substream *midi_in, *midi_out;
+#endif
+        struct timer_list timer;
+        char tinuse;                            /* Timer in use */
+        char midi_full;                         /* MIDI output buffer is full */
+        char can_set_rate;
+        char rate_set;
+
+        /* This stuff is used mainly by the lowlevel code */
+        struct comm_page *comm_page;    /* Virtual address of the memory
+                                         * seen by DSP
+                                         */
+        u32 pipe_alloc_mask;            /* Bitmask of allocated pipes */
+        u32 pipe_cyclic_mask;           /* Bitmask of pipes with cyclic
+                                         * buffers
+                                         */
+        u32 sample_rate;                /* Card sample rate in Hz */
+        u8 digital_mode;                /* Current digital mode
+                                         * (see DIGITAL_MODE_*)
+                                         */
+        u8 spdif_status;                /* Gina20, Darla20, Darla24 - only */
+        u8 clock_state;                 /* Gina20, Darla20, Darla24 - only */
+        u8 input_clock;                 /* Currently selected sample clock
+                                         * source
+                                         */
+        u8 output_clock;                /* Layla20 only */
+        char meters_enabled;            /* VU-meters status */
+        char asic_loaded;               /* Set TRUE when ASIC loaded */
+        char bad_board;                 /* Set TRUE if DSP won't load */
+        char professional_spdif;        /* 0 = consumer; 1 = professional */
+        char non_audio_spdif;           /* 3G - only */
+        char digital_in_automute;       /* Gina24, Layla24, Mona - only */
+        char has_phantom_power;
+        char hasnt_input_nominal_level; /* Gina3G */
+        char phantom_power;             /* Gina3G - only */
+        char has_midi;
+        char midi_input_enabled;
+
+#ifdef ECHOCARD_ECHO3G
+        /* External module -dependent pipe and bus indexes */
+        char px_digital_out, px_analog_in, px_digital_in, px_num;
+        char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
+#endif
+
+        char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV
+                                                 * False == +4dBu */
+        s8 input_gain[ECHO_MAXAUDIOINPUTS];     /* Input level -50..+50
+                                                 * unit is 0.5dB */
+        s8 output_gain[ECHO_MAXAUDIOOUTPUTS];   /* Output level -128..+6 dB
+                                                 * (-128=muted) */
+        s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
+                /* -128..+6 dB */
+        s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
+                /* -128..+6 dB */
+
+        u16 digital_modes;              /* Bitmask of supported modes
+                                         * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
+        u16 input_clock_types;          /* Suppoted input clock types */
+        u16 output_clock_types;         /* Suppoted output clock types -
+                                         * Layla20 only */
+        u16 device_id, subdevice_id;
+        u16 *dsp_code;                  /* Current DSP code loaded,
+                                         * NULL if nothing loaded */
+        const struct firmware *dsp_code_to_load;/* DSP code to load */
+        const struct firmware *asic_code;       /* Current ASIC code */
+        u32 comm_page_phys;                     /* Physical address of the
+                                                 * memory seen by DSP */
+        volatile u32 __iomem *dsp_registers;    /* DSP's register base */
+        u32 active_mask;                        /* Chs. active mask or
+                                                 * punks out */
+
+#ifdef ECHOCARD_HAS_MIDI
+        u16 mtc_state;                          /* State for MIDI input parsing state machine */
+        u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
+#endif
+};
+
+
+static int init_dsp_comm_page(struct echoaudio *chip);
+static int init_line_levels(struct echoaudio *chip);
+static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
+static int load_firmware(struct echoaudio *chip);
+static int wait_handshake(struct echoaudio *chip);
+static int send_vector(struct echoaudio *chip, u32 command);
+static int get_firmware(const struct firmware **fw_entry,
+                        const struct firmware *frm, struct echoaudio *chip);
+static void free_firmware(const struct firmware *fw_entry);
+
+#ifdef ECHOCARD_HAS_MIDI
+static int enable_midi_input(struct echoaudio *chip, char enable);
+static int midi_service_irq(struct echoaudio *chip);
+static int __devinit snd_echo_midi_create(struct snd_card *card,
+                                          struct echoaudio *chip);
+#endif
+
+
+static inline void clear_handshake(struct echoaudio *chip)
+{
+        chip->comm_page->handshake = 0;
+}
+
+static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
+{
+        return readl(&chip->dsp_registers[index]);
+}
+
+static inline void set_dsp_register(struct echoaudio *chip, u32 index,
+                                    u32 value)
+{
+        writel(value, &chip->dsp_registers[index]);
+}
+
+
+/* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
+for 3G cards because they depend on the external box. They are integer
+constants for all other cards.
+Never use those defines directly, use the following functions instead. */
+
+static inline int px_digital_out(const struct echoaudio *chip)
+{
+        return PX_DIGITAL_OUT;
+}
+
+static inline int px_analog_in(const struct echoaudio *chip)
+{
+        return PX_ANALOG_IN;
+}
+
+static inline int px_digital_in(const struct echoaudio *chip)
+{
+        return PX_DIGITAL_IN;
+}
+
+static inline int px_num(const struct echoaudio *chip)
+{
+        return PX_NUM;
+}
+
+static inline int bx_digital_out(const struct echoaudio *chip)
+{
+        return BX_DIGITAL_OUT;
+}
+
+static inline int bx_analog_in(const struct echoaudio *chip)
+{
+        return BX_ANALOG_IN;
+}
+
+static inline int bx_digital_in(const struct echoaudio *chip)
+{
+        return BX_DIGITAL_IN;
+}
+
+static inline int bx_num(const struct echoaudio *chip)
+{
+        return BX_NUM;
+}
+
+static inline int num_pipes_out(const struct echoaudio *chip)
+{
+        return px_analog_in(chip);
+}
+
+static inline int num_pipes_in(const struct echoaudio *chip)
+{
+        return px_num(chip) - px_analog_in(chip);
+}
+
+static inline int num_busses_out(const struct echoaudio *chip)
+{
+        return bx_analog_in(chip);
+}
+
+static inline int num_busses_in(const struct echoaudio *chip)
+{
+        return bx_num(chip) - bx_analog_in(chip);
+}
+
+static inline int num_analog_busses_out(const struct echoaudio *chip)
+{
+        return bx_digital_out(chip);
+}
+
+static inline int num_analog_busses_in(const struct echoaudio *chip)
+{
+        return bx_digital_in(chip) - bx_analog_in(chip);
+}
+
+static inline int num_digital_busses_out(const struct echoaudio *chip)
+{
+        return num_busses_out(chip) - num_analog_busses_out(chip);
+}
+
+static inline int num_digital_busses_in(const struct echoaudio *chip)
+{
+        return num_busses_in(chip) - num_analog_busses_in(chip);
+}
+
+/* The monitor array is a one-dimensional array; compute the offset
+ * into the array */
+static inline int monitor_index(const struct echoaudio *chip, int out, int in)
+{
+        return out * num_busses_in(chip) + in;
+}
+
+
+#ifndef pci_device
+#define pci_device(chip) (&chip->pci->dev)
+#endif
+
+
+#endif /* _ECHOAUDIO_H_ */