Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 165 insertions, 0 deletions

diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
new file mode 100644
index 000000000000..7e0e79180977
--- /dev/null
+++ b/sound/pci/azt3328.h
@@ -0,0 +1,165 @@
+#ifndef __SOUND_AZF3328_H
+#define __SOUND_AZF3328_H
+
+/* type argument to use for the I/O functions */
+#define WORD_VALUE      0x1000
+#define DWORD_VALUE     0x2000
+#define BYTE_VALUE      0x4000
+
+/*** main I/O area port indices ***/
+/* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
+/* the driver initialisation suggests a layout of 3 main areas:
+ * from 0x00 (playback), from 0x20 (recording) and from 0x40 (maybe DirectX
+ * timer ???). and probably another area from 0x60 to 0x6f
+ * (IRQ management, power management etc. ???). */
+/* playback area */
+#define IDX_IO_PLAY_FLAGS       0x00
+     /* able to reactivate output after output muting due to 8/16bit
+      * output change, just like 0x0002.
+      * 0x0001 is the only bit that's able to start the DMA counter */
+  #define DMA_RESUME                    0x0001 /* paused if cleared ? */
+     /* 0x0002 *temporarily* set during DMA stopping. hmm
+      * both 0x0002 and 0x0004 set in playback setup. */
+     /* able to reactivate output after output muting due to 8/16bit
+      * output change, just like 0x0001. */
+  #define DMA_PLAY_SOMETHING1           0x0002 /* \ alternated (toggled) */
+     /* 0x0004: NOT able to reactivate output */
+  #define DMA_PLAY_SOMETHING2           0x0004 /* / bits */
+  #define SOMETHING_ALMOST_ALWAYS_SET   0x0008 /* ???; can be modified */
+  #define DMA_EPILOGUE_SOMETHING        0x0010
+  #define DMA_SOMETHING_ELSE            0x0020 /* ??? */
+  #define SOMETHING_UNMODIFIABLE        0xffc0 /* unused ? not modifiable */
+#define IDX_IO_PLAY_IRQMASK     0x02
+  /* write back to flags in case flags are set, in order to ACK IRQ in handler
+   * (bit 1 of port 0x64 indicates interrupt for one of these three types)
+   * sometimes in this case it just writes 0xffff to globally ACK all IRQs
+   * settings written are not reflected when reading back, though.
+   * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows ? */
+  #define IRQ_PLAY_SOMETHING            0x0001 /* something & ACK */
+  #define IRQ_FINISHED_PLAYBUF_1        0x0002 /* 1st dmabuf finished & ACK */
+  #define IRQ_FINISHED_PLAYBUF_2        0x0004 /* 2nd dmabuf finished & ACK */
+  #define IRQMASK_SOME_STATUS_1         0x0008 /* \ related bits */
+  #define IRQMASK_SOME_STATUS_2         0x0010 /* / (checked together in loop) */
+  #define IRQMASK_UNMODIFIABLE          0xffe0 /* unused ? not modifiable */
+#define IDX_IO_PLAY_DMA_START_1 0x04 /* start address of 1st DMA play area */
+#define IDX_IO_PLAY_DMA_START_2 0x08 /* start address of 2nd DMA play area */
+#define IDX_IO_PLAY_DMA_LEN_1   0x0c /* length of 1st DMA play area */
+#define IDX_IO_PLAY_DMA_LEN_2   0x0e /* length of 2nd DMA play area */
+#define IDX_IO_PLAY_DMA_CURRPOS 0x10 /* current DMA position  */
+#define IDX_IO_PLAY_DMA_CURROFS 0x14 /* offset within current DMA play area */
+#define IDX_IO_PLAY_SOUNDFORMAT 0x16
+  /* all unspecified bits can't be modified */
+  #define SOUNDFORMAT_FREQUENCY_MASK    0x000f
+    /* all _SUSPECTED_ values are not used by Windows drivers, so we don't
+     * have any hard facts, only rough measurements */
+    #define SOUNDFORMAT_FREQ_SUSPECTED_4000     0x0c
+    #define SOUNDFORMAT_FREQ_SUSPECTED_4800     0x0a
+    #define SOUNDFORMAT_FREQ_5510               0x0d
+    #define SOUNDFORMAT_FREQ_6620               0x0b
+    #define SOUNDFORMAT_FREQ_8000               0x00 /* also 0x0e ? */
+    #define SOUNDFORMAT_FREQ_9600               0x08
+    #define SOUNDFORMAT_FREQ_SUSPECTED_12000    0x09
+    #define SOUNDFORMAT_FREQ_11025              0x01 /* also 0x0f ? */
+    #define SOUNDFORMAT_FREQ_16000              0x02
+    #define SOUNDFORMAT_FREQ_22050              0x03
+    #define SOUNDFORMAT_FREQ_32000              0x04
+    #define SOUNDFORMAT_FREQ_44100              0x05
+    #define SOUNDFORMAT_FREQ_48000              0x06
+    #define SOUNDFORMAT_FREQ_SUSPECTED_64000    0x07
+  #define SOUNDFORMAT_FLAG_16BIT        0x0010
+  #define SOUNDFORMAT_FLAG_2CHANNELS    0x0020
+/* recording area (see also: playback bit flag definitions) */
+#define IDX_IO_REC_FLAGS        0x20 /* ?? */
+#define IDX_IO_REC_IRQMASK      0x22 /* ?? */
+  #define IRQ_REC_SOMETHING             0x0001 /* something & ACK */
+  #define IRQ_FINISHED_RECBUF_1         0x0002 /* 1st dmabuf finished & ACK */
+  #define IRQ_FINISHED_RECBUF_2         0x0004 /* 2nd dmabuf finished & ACK */
+  /* hmm, maybe these are just the corresponding *recording* flags ?
+   * but OTOH they are most likely at port 0x22 instead */
+  #define IRQMASK_SOME_STATUS_1         0x0008 /* \ related bits */
+  #define IRQMASK_SOME_STATUS_2         0x0010 /* / (checked together in loop) */
+#define IDX_IO_REC_DMA_START_1  0x24
+#define IDX_IO_REC_DMA_START_2  0x28
+#define IDX_IO_REC_DMA_LEN_1    0x2c
+#define IDX_IO_REC_DMA_LEN_2    0x2e
+#define IDX_IO_REC_DMA_CURRPOS  0x30
+#define IDX_IO_REC_DMA_CURROFS  0x34
+#define IDX_IO_REC_SOUNDFORMAT  0x36
+/* some third area ? (after playback and recording) */
+#define IDX_IO_SOMETHING_FLAGS  0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init */
+/* general */
+#define IDX_IO_60H              0x60 /* writing 0xffff returns 0xffff */
+#define IDX_IO_62H              0x62 /* writing to WORD 0x0062 can hang the box ! --> responsible for IRQ management as a whole ?? */
+#define IDX_IO_IRQ63H           0x63 /* FIXME !! */
+  #define IO_IRQ63H_SOMETHING           0x04 /* being set in IRQ handler in case port 0x00 had 0x0020 set upon IRQ handler */
+#define IDX_IO_IRQSTATUS        0x64
+  #define IRQ_PLAYBACK                  0x0001
+  #define IRQ_RECORDING                 0x0002
+  #define IRQ_MPU401                    0x0010
+  #define IRQ_SOMEIRQ                   0x0020 /* ???? */
+  #define IRQ_WHO_KNOWS_UNUSED          0x00e0 /* probably unused */
+#define IDX_IO_66H              0x66    /* writing 0xffff returns 0x0000 */
+#define IDX_IO_SOME_VALUE       0x68    /* this is always set to 0x3ff, and writable; maybe some buffer limit, but I couldn't find out more */
+#define IDX_IO_6AH              0x6A    /* this WORD can be set to have bits 0x0028 activated; actually inhibits PCM playback !!! maybe power management ?? */
+#define IDX_IO_6CH              0x6C    /* this WORD can have all its bits activated ? */
+#define IDX_IO_6EH              0x6E    /* writing 0xffff returns 0x83fe */
+/* further I/O indices not saved/restored, so probably not used */
+
+/*** I/O 2 area port indices ***/
+/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */ 
+#define IDX_IO2_LEGACY_ADDR     0x04
+  #define LEGACY_SOMETHING              0x01 /* OPL3 ?? */
+  #define LEGACY_JOY                    0x08
+
+/*** mixer I/O area port indices ***/
+/* (only 0x22 of 0x40 bytes saved/restored by Windows driver)
+ * generally spoken: AC97 register index = AZF3328 mixer reg index + 2
+ * (in other words: AZF3328 NOT fully AC97 compliant) */
+  #define MIXER_VOLUME_RIGHT_MASK       0x001f
+  #define MIXER_VOLUME_LEFT_MASK        0x1f00
+  #define MIXER_MUTE_MASK               0x8000
+#define IDX_MIXER_RESET         0x00 /* does NOT seem to have AC97 ID bits */
+#define IDX_MIXER_PLAY_MASTER   0x02
+#define IDX_MIXER_MODEMOUT      0x04
+#define IDX_MIXER_BASSTREBLE    0x06
+  #define MIXER_BASSTREBLE_TREBLE_VOLUME_MASK   0x000e
+  #define MIXER_BASSTREBLE_BASS_VOLUME_MASK     0x0e00
+#define IDX_MIXER_PCBEEP        0x08
+#define IDX_MIXER_MODEMIN       0x0a
+#define IDX_MIXER_MIC           0x0c
+  #define MIXER_MIC_MICGAIN_20DB_ENHANCEMENT_MASK       0x0040
+#define IDX_MIXER_LINEIN        0x0e
+#define IDX_MIXER_CDAUDIO       0x10
+#define IDX_MIXER_VIDEO         0x12
+#define IDX_MIXER_AUX           0x14
+#define IDX_MIXER_WAVEOUT       0x16
+#define IDX_MIXER_FMSYNTH       0x18
+#define IDX_MIXER_REC_SELECT    0x1a
+  #define MIXER_REC_SELECT_MIC          0x00
+  #define MIXER_REC_SELECT_CD           0x01
+  #define MIXER_REC_SELECT_VIDEO        0x02
+  #define MIXER_REC_SELECT_AUX          0x03
+  #define MIXER_REC_SELECT_LINEIN       0x04
+  #define MIXER_REC_SELECT_MIXSTEREO    0x05
+  #define MIXER_REC_SELECT_MIXMONO      0x06
+  #define MIXER_REC_SELECT_MONOIN       0x07
+#define IDX_MIXER_REC_VOLUME    0x1c
+#define IDX_MIXER_ADVCTL1       0x1e
+  /* unlisted bits are unmodifiable */
+  #define MIXER_ADVCTL1_3DWIDTH_MASK    0x000e
+  #define MIXER_ADVCTL1_HIFI3D_MASK     0x0300
+#define IDX_MIXER_ADVCTL2       0x20 /* resembles AC97_GENERAL_PURPOSE reg ! */
+  /* unlisted bits are unmodifiable */
+  #define MIXER_ADVCTL2_BIT7            0x0080 /* WaveOut 3D Bypass ? mutes WaveOut at LineOut */
+  #define MIXER_ADVCTL2_BIT8            0x0100 /* is this Modem Out Select ? */
+  #define MIXER_ADVCTL2_BIT9            0x0200 /* Mono Select Source ? */
+  #define MIXER_ADVCTL2_BIT13           0x2000 /* 3D enable ? */
+  #define MIXER_ADVCTL2_BIT15           0x8000 /* unknown */
+  
+#define IDX_MIXER_SOMETHING30H  0x30 /* used, but unknown ??? */
+
+/* driver internal flags */
+#define SET_CHAN_LEFT   1
+#define SET_CHAN_RIGHT  2
+
+#endif /* __SOUND_AZF3328_H  */