Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1485 insertions, 0 deletions

diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c
new file mode 100644
index 000000000000..50ca64629450
--- /dev/null
+++ b/sound/oss/sscape.c
@@ -0,0 +1,1485 @@
+/*
+ * sound/sscape.c
+ *
+ * Low level driver for Ensoniq SoundScape
+ *
+ *
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ *
+ *
+ * Thomas Sailer        : ioctl code reworked (vmalloc/vfree removed)
+ * Sergey Smitienko     : ensoniq p'n'p support
+ * Christoph Hellwig    : adapted to module_init/module_exit
+ * Bartlomiej Zolnierkiewicz : added __init to attach_sscape()
+ * Chris Rankin         : Specify that this module owns the coprocessor
+ * Arnaldo C. de Melo   : added missing restore_flags in sscape_pnp_upload_file
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include "sound_config.h"
+#include "sound_firmware.h"
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fcntl.h>
+#include <linux/ctype.h>
+#include <linux/stddef.h>
+#include <linux/kmod.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+
+#include "coproc.h"
+
+#include "ad1848.h"
+#include "mpu401.h"
+
+/*
+ *    I/O ports
+ */
+#define MIDI_DATA       0
+#define MIDI_CTRL       1
+#define HOST_CTRL       2
+#define TX_READY        0x02
+#define RX_READY        0x01
+#define HOST_DATA       3
+#define ODIE_ADDR       4
+#define ODIE_DATA       5
+
+/*
+ *    Indirect registers
+ */
+
+#define GA_INTSTAT_REG  0
+#define GA_INTENA_REG   1
+#define GA_DMAA_REG     2
+#define GA_DMAB_REG     3
+#define GA_INTCFG_REG   4
+#define GA_DMACFG_REG   5
+#define GA_CDCFG_REG    6
+#define GA_SMCFGA_REG   7
+#define GA_SMCFGB_REG   8
+#define GA_HMCTL_REG    9
+
+/*
+ * DMA channel identifiers (A and B)
+ */
+
+#define SSCAPE_DMA_A    0
+#define SSCAPE_DMA_B    1
+
+#define PORT(name)      (devc->base+name)
+
+/*
+ * Host commands recognized by the OBP microcode
+ */
+ 
+#define CMD_GEN_HOST_ACK        0x80
+#define CMD_GEN_MPU_ACK         0x81
+#define CMD_GET_BOARD_TYPE      0x82
+#define CMD_SET_CONTROL         0x88    /* Old firmware only */
+#define CMD_GET_CONTROL         0x89    /* Old firmware only */
+#define CTL_MASTER_VOL          0
+#define CTL_MIC_MODE            2
+#define CTL_SYNTH_VOL           4
+#define CTL_WAVE_VOL            7
+#define CMD_SET_EXTMIDI         0x8a
+#define CMD_GET_EXTMIDI         0x8b
+#define CMD_SET_MT32            0x8c
+#define CMD_GET_MT32            0x8d
+
+#define CMD_ACK                 0x80
+
+#define IC_ODIE                 1
+#define IC_OPUS                 2
+
+typedef struct sscape_info
+{
+        int     base, irq, dma;
+        
+        int     codec, codec_irq;       /* required to setup pnp cards*/
+        int     codec_type;
+        int     ic_type;
+        char*   raw_buf;
+        unsigned long   raw_buf_phys;
+        int     buffsize;               /* -------------------------- */
+        spinlock_t lock;
+        int     ok;     /* Properly detected */
+        int     failed;
+        int     dma_allocated;
+        int     codec_audiodev;
+        int     opened;
+        int     *osp;
+        int     my_audiodev;
+} sscape_info;
+
+static struct sscape_info adev_info = {
+        0
+};
+
+static struct sscape_info *devc = &adev_info;
+static int sscape_mididev = -1;
+
+/* Some older cards have assigned interrupt bits differently than new ones */
+static char valid_interrupts_old[] = {
+        9, 7, 5, 15
+};
+
+static char valid_interrupts_new[] = {
+        9, 5, 7, 10
+};
+
+static char *valid_interrupts = valid_interrupts_new;
+
+/*
+ *      See the bottom of the driver. This can be set by spea =0/1.
+ */
+ 
+#ifdef REVEAL_SPEA
+static char old_hardware = 1;
+#else
+static char old_hardware;
+#endif
+
+static void sleep(unsigned howlong)
+{
+        current->state = TASK_INTERRUPTIBLE;
+        schedule_timeout(howlong);
+}
+
+static unsigned char sscape_read(struct sscape_info *devc, int reg)
+{
+        unsigned long flags;
+        unsigned char val;
+
+        spin_lock_irqsave(&devc->lock,flags);
+        outb(reg, PORT(ODIE_ADDR));
+        val = inb(PORT(ODIE_DATA));
+        spin_unlock_irqrestore(&devc->lock,flags);
+        return val;
+}
+
+static void __sscape_write(int reg, int data)
+{
+        outb(reg, PORT(ODIE_ADDR));
+        outb(data, PORT(ODIE_DATA));
+}
+
+static void sscape_write(struct sscape_info *devc, int reg, int data)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&devc->lock,flags);
+        __sscape_write(reg, data);
+        spin_unlock_irqrestore(&devc->lock,flags);
+}
+
+static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg)
+{
+        unsigned char res;
+        unsigned long flags;
+
+        spin_lock_irqsave(&devc->lock,flags);
+        outb( reg, devc -> codec);
+        res = inb (devc -> codec + 1);
+        spin_unlock_irqrestore(&devc->lock,flags);
+        return res;
+
+}
+
+static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data)
+{
+        unsigned long flags;
+        
+        spin_lock_irqsave(&devc->lock,flags);
+        outb( reg, devc -> codec);
+        outb( data, devc -> codec + 1);
+        spin_unlock_irqrestore(&devc->lock,flags);
+}
+
+static void host_open(struct sscape_info *devc)
+{
+        outb((0x00), PORT(HOST_CTRL));  /* Put the board to the host mode */
+}
+
+static void host_close(struct sscape_info *devc)
+{
+        outb((0x03), PORT(HOST_CTRL));  /* Put the board to the MIDI mode */
+}
+
+static int host_write(struct sscape_info *devc, unsigned char *data, int count)
+{
+        unsigned long flags;
+        int i, timeout_val;
+
+        spin_lock_irqsave(&devc->lock,flags);
+        /*
+         * Send the command and data bytes
+         */
+
+        for (i = 0; i < count; i++)
+        {
+                for (timeout_val = 10000; timeout_val > 0; timeout_val--)
+                        if (inb(PORT(HOST_CTRL)) & TX_READY)
+                                break;
+
+                if (timeout_val <= 0)
+                {
+                                spin_unlock_irqrestore(&devc->lock,flags);
+                            return 0;
+                }
+                outb(data[i], PORT(HOST_DATA));
+        }
+        spin_unlock_irqrestore(&devc->lock,flags);
+        return 1;
+}
+
+static int host_read(struct sscape_info *devc)
+{
+        unsigned long flags;
+        int timeout_val;
+        unsigned char data;
+
+        spin_lock_irqsave(&devc->lock,flags);
+        /*
+         * Read a byte
+         */
+
+        for (timeout_val = 10000; timeout_val > 0; timeout_val--)
+                if (inb(PORT(HOST_CTRL)) & RX_READY)
+                        break;
+
+        if (timeout_val <= 0)
+        {
+                spin_unlock_irqrestore(&devc->lock,flags);
+                return -1;
+        }
+        data = inb(PORT(HOST_DATA));
+        spin_unlock_irqrestore(&devc->lock,flags);
+        return data;
+}
+
+#if 0 /* unused */
+static int host_command1(struct sscape_info *devc, int cmd)
+{
+        unsigned char buf[10];
+        buf[0] = (unsigned char) (cmd & 0xff);
+        return host_write(devc, buf, 1);
+}
+#endif /* unused */
+
+
+static int host_command2(struct sscape_info *devc, int cmd, int parm1)
+{
+        unsigned char buf[10];
+
+        buf[0] = (unsigned char) (cmd & 0xff);
+        buf[1] = (unsigned char) (parm1 & 0xff);
+
+        return host_write(devc, buf, 2);
+}
+
+static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2)
+{
+        unsigned char buf[10];
+
+        buf[0] = (unsigned char) (cmd & 0xff);
+        buf[1] = (unsigned char) (parm1 & 0xff);
+        buf[2] = (unsigned char) (parm2 & 0xff);
+        return host_write(devc, buf, 3);
+}
+
+static void set_mt32(struct sscape_info *devc, int value)
+{
+        host_open(devc);
+        host_command2(devc, CMD_SET_MT32, value ? 1 : 0);
+        if (host_read(devc) != CMD_ACK)
+        {
+                /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */
+        }
+        host_close(devc);
+}
+
+static void set_control(struct sscape_info *devc, int ctrl, int value)
+{
+        host_open(devc);
+        host_command3(devc, CMD_SET_CONTROL, ctrl, value);
+        if (host_read(devc) != CMD_ACK)
+        {
+                /* printk( "SNDSCAPE: Setting control (%d) failed\n",  ctrl); */
+        }
+        host_close(devc);
+}
+
+static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode)
+{
+        unsigned char temp;
+
+        if (dma_chan != SSCAPE_DMA_A)
+        {
+                printk(KERN_WARNING "soundscape: Tried to use DMA channel  != A. Why?\n");
+                return;
+        }
+        audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE;
+        DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode);
+        audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE;
+
+        temp = devc->dma << 4;  /* Setup DMA channel select bits */
+        if (devc->dma <= 3)
+                temp |= 0x80;   /* 8 bit DMA channel */
+
+        temp |= 1;              /* Trigger DMA */
+        sscape_write(devc, GA_DMAA_REG, temp);
+        temp &= 0xfe;           /* Clear DMA trigger */
+        sscape_write(devc, GA_DMAA_REG, temp);
+}
+
+static int verify_mpu(struct sscape_info *devc)
+{
+        /*
+         * The SoundScape board could be in three modes (MPU, 8250 and host).
+         * If the card is not in the MPU mode, enabling the MPU driver will
+         * cause infinite loop (the driver believes that there is always some
+         * received data in the buffer.
+         *
+         * Detect this by looking if there are more than 10 received MIDI bytes
+         * (0x00) in the buffer.
+         */
+
+        int i;
+
+        for (i = 0; i < 10; i++)
+        {
+                if (inb(devc->base + HOST_CTRL) & 0x80)
+                        return 1;
+
+                if (inb(devc->base) != 0x00)
+                        return 1;
+        }
+        printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n");
+        return 0;
+}
+
+static int sscape_coproc_open(void *dev_info, int sub_device)
+{
+        if (sub_device == COPR_MIDI)
+        {
+                set_mt32(devc, 0);
+                if (!verify_mpu(devc))
+                        return -EIO;
+        }
+        return 0;
+}
+
+static void sscape_coproc_close(void *dev_info, int sub_device)
+{
+        struct sscape_info *devc = dev_info;
+        unsigned long   flags;
+
+        spin_lock_irqsave(&devc->lock,flags);
+        if (devc->dma_allocated)
+        {
+                __sscape_write(GA_DMAA_REG, 0x20);      /* DMA channel disabled */
+                devc->dma_allocated = 0;
+        }
+        spin_unlock_irqrestore(&devc->lock,flags);
+        return;
+}
+
+static void sscape_coproc_reset(void *dev_info)
+{
+}
+
+static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag)
+{
+        unsigned long flags;
+        unsigned char temp;
+        volatile int done, timeout_val;
+        static unsigned char codec_dma_bits;
+
+        if (flag & CPF_FIRST)
+        {
+                /*
+                 * First block. Have to allocate DMA and to reset the board
+                 * before continuing.
+                 */
+
+                spin_lock_irqsave(&devc->lock,flags);
+                codec_dma_bits = sscape_read(devc, GA_CDCFG_REG);
+
+                if (devc->dma_allocated == 0)
+                        devc->dma_allocated = 1;
+
+                spin_unlock_irqrestore(&devc->lock,flags);
+
+                sscape_write(devc, GA_HMCTL_REG, 
+                        (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f);       /*Reset */
+
+                for (timeout_val = 10000; timeout_val > 0; timeout_val--)
+                        sscape_read(devc, GA_HMCTL_REG);        /* Delay */
+
+                /* Take board out of reset */
+                sscape_write(devc, GA_HMCTL_REG,
+                        (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80);
+        }
+        /*
+         * Transfer one code block using DMA
+         */
+        if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL)
+        {
+                printk(KERN_WARNING "soundscape: DMA buffer not available\n");
+                return 0;
+        }
+        memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size);
+
+        spin_lock_irqsave(&devc->lock,flags);
+        
+        /******** INTERRUPTS DISABLED NOW ********/
+        
+        do_dma(devc, SSCAPE_DMA_A,
+               audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys,
+               size, DMA_MODE_WRITE);
+
+        /*
+         * Wait until transfer completes.
+         */
+        
+        done = 0;
+        timeout_val = 30;
+        while (!done && timeout_val-- > 0)
+        {
+                int resid;
+
+                if (HZ / 50)
+                        sleep(HZ / 50);
+                clear_dma_ff(devc->dma);
+                if ((resid = get_dma_residue(devc->dma)) == 0)
+                        done = 1;
+        }
+
+        spin_unlock_irqrestore(&devc->lock,flags);
+        if (!done)
+                return 0;
+
+        if (flag & CPF_LAST)
+        {
+                /*
+                 * Take the board out of reset
+                 */
+                outb((0x00), PORT(HOST_CTRL));
+                outb((0x00), PORT(MIDI_CTRL));
+
+                temp = sscape_read(devc, GA_HMCTL_REG);
+                temp |= 0x40;
+                sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */
+
+                /*
+                 * Wait until the ODB wakes up
+                 */
+                spin_lock_irqsave(&devc->lock,flags);
+                done = 0;
+                timeout_val = 5 * HZ;
+                while (!done && timeout_val-- > 0)
+                {
+                        unsigned char x;
+                        
+                        sleep(1);
+                        x = inb(PORT(HOST_DATA));
+                        if (x == 0xff || x == 0xfe)             /* OBP startup acknowledge */
+                        {
+                                DDB(printk("Soundscape: Acknowledge = %x\n", x));
+                                done = 1;
+                        }
+                }
+                sscape_write(devc, GA_CDCFG_REG, codec_dma_bits);
+
+                spin_unlock_irqrestore(&devc->lock,flags);
+                if (!done)
+                {
+                        printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n");
+                        return 0;
+                }
+                spin_lock_irqsave(&devc->lock,flags);
+                done = 0;
+                timeout_val = 5 * HZ;
+                while (!done && timeout_val-- > 0)
+                {
+                        sleep(1);
+                        if (inb(PORT(HOST_DATA)) == 0xfe)       /* Host startup acknowledge */
+                                done = 1;
+                }
+                spin_unlock_irqrestore(&devc->lock,flags);
+                if (!done)
+                {
+                        printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
+                        return 0;
+                }
+                printk(KERN_INFO "SoundScape board initialized OK\n");
+                set_control(devc, CTL_MASTER_VOL, 100);
+                set_control(devc, CTL_SYNTH_VOL, 100);
+
+#ifdef SSCAPE_DEBUG3
+                /*
+                 * Temporary debugging aid. Print contents of the registers after
+                 * downloading the code.
+                 */
+                {
+                        int i;
+
+                        for (i = 0; i < 13; i++)
+                                printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
+                }
+#endif
+
+        }
+        return 1;
+}
+
+static int download_boot_block(void *dev_info, copr_buffer * buf)
+{
+        if (buf->len <= 0 || buf->len > sizeof(buf->data))
+                return -EINVAL;
+
+        if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags))
+        {
+                printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n");
+                return -EIO;
+        }
+        return 0;
+}
+
+static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local)
+{
+        copr_buffer *buf;
+        int err;
+
+        switch (cmd) 
+        {
+                case SNDCTL_COPR_RESET:
+                        sscape_coproc_reset(dev_info);
+                        return 0;
+
+                case SNDCTL_COPR_LOAD:
+                        buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
+                        if (buf == NULL)
+                                return -ENOSPC;
+                        if (copy_from_user(buf, arg, sizeof(copr_buffer))) 
+                        {
+                                vfree(buf);
+                                return -EFAULT;
+                        }
+                        err = download_boot_block(dev_info, buf);
+                        vfree(buf);
+                        return err;
+                
+                default:
+                        return -EINVAL;
+        }
+}
+
+static coproc_operations sscape_coproc_operations =
+{
+        "SoundScape M68K",
+        THIS_MODULE,
+        sscape_coproc_open,
+        sscape_coproc_close,
+        sscape_coproc_ioctl,
+        sscape_coproc_reset,
+        &adev_info
+};
+
+static struct resource *sscape_ports;
+static int sscape_is_pnp;
+
+static void __init attach_sscape(struct address_info *hw_config)
+{
+#ifndef SSCAPE_REGS
+        /*
+         * Config register values for Spea/V7 Media FX and Ensoniq S-2000.
+         * These values are card
+         * dependent. If you have another SoundScape based card, you have to
+         * find the correct values. Do the following:
+         *  - Compile this driver with SSCAPE_DEBUG1 defined.
+         *  - Shut down and power off your machine.
+         *  - Boot with DOS so that the SSINIT.EXE program is run.
+         *  - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed
+         *    when detecting the SoundScape.
+         *  - Modify the following list to use the values printed during boot.
+         *    Undefine the SSCAPE_DEBUG1
+         */
+#define SSCAPE_REGS { \
+/* I0 */        0x00, \
+/* I1 */        0xf0, /* Note! Ignored. Set always to 0xf0 */ \
+/* I2 */        0x20, /* Note! Ignored. Set always to 0x20 */ \
+/* I3 */        0x20, /* Note! Ignored. Set always to 0x20 */ \
+/* I4 */        0xf5, /* Ignored */ \
+/* I5 */        0x10, \
+/* I6 */        0x00, \
+/* I7 */        0x2e, /* I7 MEM config A. Likely to vary between models */ \
+/* I8 */        0x00, /* I8 MEM config B. Likely to vary between models */ \
+/* I9 */        0x40 /* Ignored */ \
+        }
+#endif
+
+        unsigned long   flags;
+        static unsigned char regs[10] = SSCAPE_REGS;
+
+        int i, irq_bits = 0xff;
+
+        if (old_hardware)
+        {
+                valid_interrupts = valid_interrupts_old;
+                conf_printf("Ensoniq SoundScape (old)", hw_config);
+        }
+        else
+                conf_printf("Ensoniq SoundScape", hw_config);
+
+        for (i = 0; i < 4; i++)
+        {
+                if (hw_config->irq == valid_interrupts[i])
+                {
+                        irq_bits = i;
+                        break;
+                }
+        }
+        if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff))
+        {
+                printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq);
+                release_region(devc->base, 2);
+                release_region(devc->base + 2, 6);
+                if (sscape_is_pnp)
+                        release_region(devc->codec, 2);
+                return;
+        }
+        
+        if (!sscape_is_pnp) {
+        
+                spin_lock_irqsave(&devc->lock,flags);
+                /* Host interrupt enable */
+                sscape_write(devc, 1, 0xf0);    /* All interrupts enabled */
+                /* DMA A status/trigger register */
+                sscape_write(devc, 2, 0x20);    /* DMA channel disabled */
+                /* DMA B status/trigger register */
+                sscape_write(devc, 3, 0x20);    /* DMA channel disabled */
+                /* Host interrupt config reg */
+                sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits);
+                /* Don't destroy CD-ROM DMA config bits (0xc0) */
+                sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0));
+                /* CD-ROM config (WSS codec actually) */
+                sscape_write(devc, 6, regs[6]);
+                sscape_write(devc, 7, regs[7]);
+                sscape_write(devc, 8, regs[8]);
+                /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */
+                sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08);
+                spin_unlock_irqrestore(&devc->lock,flags);
+        }
+#ifdef SSCAPE_DEBUG2
+        /*
+         * Temporary debugging aid. Print contents of the registers after
+         * changing them.
+         */
+        {
+                int i;
+
+                for (i = 0; i < 13; i++)
+                        printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
+        }
+#endif
+
+        if (probe_mpu401(hw_config, sscape_ports))
+                hw_config->always_detect = 1;
+        hw_config->name = "SoundScape";
+
+        hw_config->irq *= -1;   /* Negative value signals IRQ sharing */
+        attach_mpu401(hw_config, THIS_MODULE);
+        hw_config->irq *= -1;   /* Restore it */
+
+        if (hw_config->slots[1] != -1)  /* The MPU driver installed itself */
+        {
+                sscape_mididev = hw_config->slots[1];
+                midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations;
+        }
+        sscape_write(devc, GA_INTENA_REG, 0x80);        /* Master IRQ enable */
+        devc->ok = 1;
+        devc->failed = 0;
+}
+
+static int detect_ga(sscape_info * devc)
+{
+        unsigned char save;
+
+        DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base));
+
+        /*
+         * First check that the address register of "ODIE" is
+         * there and that it has exactly 4 writable bits.
+         * First 4 bits
+         */
+        
+        if ((save = inb(PORT(ODIE_ADDR))) & 0xf0)
+        {
+                DDB(printk("soundscape: Detect error A\n"));
+                return 0;
+        }
+        outb((0x00), PORT(ODIE_ADDR));
+        if (inb(PORT(ODIE_ADDR)) != 0x00)
+        {
+                DDB(printk("soundscape: Detect error B\n"));
+                return 0;
+        }
+        outb((0xff), PORT(ODIE_ADDR));
+        if (inb(PORT(ODIE_ADDR)) != 0x0f)
+        {
+                DDB(printk("soundscape: Detect error C\n"));
+                return 0;
+        }
+        outb((save), PORT(ODIE_ADDR));
+
+        /*
+         * Now verify that some indirect registers return zero on some bits.
+         * This may break the driver with some future revisions of "ODIE" but...
+         */
+
+        if (sscape_read(devc, 0) & 0x0c)
+        {
+                DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0)));
+                return 0;
+        }
+        if (sscape_read(devc, 1) & 0x0f)
+        {
+                DDB(printk("soundscape: Detect error E\n"));
+                return 0;
+        }
+        if (sscape_read(devc, 5) & 0x0f)
+        {
+                DDB(printk("soundscape: Detect error F\n"));
+                return 0;
+        }
+        return 1;
+}
+
+static  int sscape_read_host_ctrl(sscape_info* devc)
+{
+        return host_read(devc);
+}
+
+static  void sscape_write_host_ctrl2(sscape_info *devc, int a, int b)
+{
+        host_command2(devc, a, b);
+}
+
+static int sscape_alloc_dma(sscape_info *devc)
+{
+        char *start_addr, *end_addr;
+        int dma_pagesize;
+        int sz, size;
+        struct page *page;
+
+        if (devc->raw_buf != NULL) return 0;    /* Already done */
+        dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024);
+        devc->raw_buf = NULL;
+        devc->buffsize = 8192*4;
+        if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize;
+        start_addr = NULL;
+        /*
+         * Now loop until we get a free buffer. Try to get smaller buffer if
+         * it fails. Don't accept smaller than 8k buffer for performance
+         * reasons.
+         */
+        while (start_addr == NULL && devc->buffsize > PAGE_SIZE) {
+                for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
+                devc->buffsize = PAGE_SIZE * (1 << sz);
+                start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz);
+                if (start_addr == NULL) devc->buffsize /= 2;
+        }
+
+        if (start_addr == NULL) {
+                printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n");
+                return 0;
+        } else {
+                /* make some checks */
+                end_addr = start_addr + devc->buffsize - 1;             
+                /* now check if it fits into the same dma-pagesize */
+
+                if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1))
+                    || end_addr >= (char *) (MAX_DMA_ADDRESS)) {
+                        printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize);
+                        return 0;
+                }
+        }
+        devc->raw_buf = start_addr;
+        devc->raw_buf_phys = virt_to_bus(start_addr);
+
+        for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
+                SetPageReserved(page);
+        return 1;
+}
+
+static void sscape_free_dma(sscape_info *devc)
+{
+        int sz, size;
+        unsigned long start_addr, end_addr;
+        struct page *page;
+
+        if (devc->raw_buf == NULL) return;
+        for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
+        start_addr = (unsigned long) devc->raw_buf;
+        end_addr = start_addr + devc->buffsize;
+
+        for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
+                ClearPageReserved(page);
+
+        free_pages((unsigned long) devc->raw_buf, sz);
+        devc->raw_buf = NULL;
+}
+
+/* Intel version !!!!!!!!! */
+
+static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode)
+{
+        unsigned long flags;
+
+        flags = claim_dma_lock();
+        disable_dma(chan);
+        clear_dma_ff(chan);
+        set_dma_mode(chan, dma_mode);
+        set_dma_addr(chan, physaddr);
+        set_dma_count(chan, count);
+        enable_dma(chan);
+        release_dma_lock(flags);
+        return 0;
+}
+
+static void sscape_pnp_start_dma(sscape_info* devc, int arg )
+{
+        int reg;
+        if (arg == 0) reg = 2;
+        else reg = 3;
+
+        sscape_write(devc, reg, sscape_read( devc, reg) | 0x01);
+        sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE);
+}
+
+static int sscape_pnp_wait_dma (sscape_info* devc, int arg )
+{
+        int             reg;
+        unsigned long   i;
+        unsigned char   d;
+
+        if (arg == 0) reg = 2;
+        else reg = 3;
+
+        sleep ( 1 );
+        i = 0;
+        do {
+                d = sscape_read(devc, reg) & 1;
+                if ( d == 1)  break;
+                i++;
+        } while (i < 500000);
+        d = sscape_read(devc, reg) & 1; 
+        return d;
+}
+
+static  int     sscape_pnp_alloc_dma(sscape_info* devc)
+{
+        /* printk(KERN_INFO "sscape: requesting dma\n"); */
+        if (request_dma(devc -> dma, "sscape")) return 0;
+        /* printk(KERN_INFO "sscape: dma channel allocated\n"); */
+        if (!sscape_alloc_dma(devc)) {
+                free_dma(devc -> dma);
+                return 0;
+        };
+        return 1;
+}
+
+static  void    sscape_pnp_free_dma(sscape_info* devc)
+{
+        sscape_free_dma( devc);
+        free_dma(devc -> dma ); 
+        /* printk(KERN_INFO "sscape: dma released\n"); */
+}
+
+static  int     sscape_pnp_upload_file(sscape_info* devc, char* fn)
+{       
+        int             done = 0;
+        int             timeout_val;
+        char*           data,*dt;
+        int             len,l;
+        unsigned long   flags;
+
+        sscape_write( devc, 9, sscape_read(devc, 9 )  & 0x3F );
+        sscape_write( devc, 2, (devc -> dma << 4) | 0x80 );
+        sscape_write( devc, 3, 0x20 );
+        sscape_write( devc, 9, sscape_read( devc, 9 )  | 0x80 );
+        
+        len = mod_firmware_load(fn, &data);
+        if (len == 0) {
+                    printk(KERN_ERR "sscape: file not found: %s\n", fn);
+                    return 0;
+        }
+        dt = data;
+        spin_lock_irqsave(&devc->lock,flags);
+        while ( len > 0 ) {
+                if (len > devc -> buffsize) l = devc->buffsize;
+                else l = len;
+                len -= l;               
+                memcpy(devc->raw_buf, dt, l); dt += l;
+                sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48);
+                sscape_pnp_start_dma ( devc, 0 );
+                if (sscape_pnp_wait_dma ( devc, 0 ) == 0) {
+                        spin_unlock_irqrestore(&devc->lock,flags);
+                        return 0;
+                }
+        }
+        
+        spin_unlock_irqrestore(&devc->lock,flags);
+        vfree(data);
+        
+        outb(0, devc -> base + 2);
+        outb(0, devc -> base);
+
+        sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40);
+
+        timeout_val = 5 * HZ; 
+        while (!done && timeout_val-- > 0)
+        {
+                unsigned char x;
+                sleep(1);
+                x = inb( devc -> base + 3);
+                if (x == 0xff || x == 0xfe)             /* OBP startup acknowledge */
+                {
+                        //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
+                        done = 1;
+                }
+        }
+        timeout_val = 5 * HZ;
+        done = 0;
+        while (!done && timeout_val-- > 0)
+        {
+                unsigned char x;
+                sleep(1);
+                x = inb( devc -> base + 3);
+                if (x == 0xfe)          /* OBP startup acknowledge */
+                {
+                        //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
+                        done = 1;
+                }
+        }
+
+        if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
+
+        sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
+        sscape_write( devc, 3, (devc -> dma << 4) + 0x80);
+        return 1;
+}
+
+static void __init sscape_pnp_init_hw(sscape_info* devc)
+{       
+        unsigned char midi_irq = 0, sb_irq = 0;
+        unsigned i;
+        static  char code_file_name[23] = "/sndscape/sndscape.cox";
+        
+        int sscape_sb_enable            = 0;
+        int sscape_joystic_enable       = 0x7f;
+        int sscape_mic_enable           = 0;
+        int sscape_ext_midi             = 0;            
+
+        if ( !sscape_pnp_alloc_dma(devc) ) {
+                printk(KERN_ERR "sscape: faild to allocate dma\n");
+                return;
+        }
+
+        for (i = 0; i < 4; i++) {
+                if ( devc -> irq   == valid_interrupts[i] ) 
+                        midi_irq = i;
+                if ( devc -> codec_irq == valid_interrupts[i] ) 
+                        sb_irq = i;
+        }
+
+        sscape_write( devc, 5, 0x50);
+        sscape_write( devc, 7, 0x2e);
+        sscape_write( devc, 8, 0x00);
+
+        sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
+        sscape_write( devc, 3, ( devc -> dma << 4) | 0x80);
+
+        if ( sscape_sb_enable )
+                sscape_write (devc, 4, 0xF0 | (sb_irq << 2) | midi_irq);
+        else    
+                sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq);
+
+        i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0);
+        if ( sscape_sb_enable )
+                i |= devc->ic_type == IC_ODIE ? 0x05 : 0x07;        
+        if (sscape_joystic_enable) i |= 8;
+        
+        sscape_write (devc, 9, i);
+        sscape_write (devc, 6, 0x80);
+        sscape_write (devc, 1, 0x80);
+
+        if (devc -> codec_type == 2) {
+                sscape_pnp_write_codec( devc, 0x0C, 0x50);
+                sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F);
+                sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0);
+                sscape_pnp_write_codec( devc, 29, 0x20);
+        }
+
+        if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) {
+                printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n");
+                sscape_pnp_free_dma(devc);
+                return;
+        }
+
+        i = sscape_read_host_ctrl( devc );
+        
+        if ( (i & 0x0F) >  7 ) {
+                printk(KERN_ERR "sscape: scope.cod faild\n");
+                sscape_pnp_free_dma(devc);
+                return;
+        }
+        if ( i & 0x10 ) sscape_write( devc, 7, 0x2F);
+        code_file_name[21] = (char) ( i & 0x0F) + 0x30;
+        if (sscape_pnp_upload_file( devc, code_file_name) == 0) {
+                printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name);
+                sscape_pnp_free_dma(devc);
+                return;
+        }
+        
+        if (devc->ic_type != IC_ODIE) {
+                sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) |
+                 ( sscape_mic_enable == 0 ? 0x00 : 0x80) );
+        }
+        sscape_write_host_ctrl2( devc, 0x84, 0x64 );  /* MIDI volume */
+        sscape_write_host_ctrl2( devc, 0x86, 0x64 );  /* MIDI volume?? */
+        sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi);
+
+        sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL
+        sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL
+        sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL
+        sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR
+
+        if (devc -> codec_type == 1) {
+                sscape_pnp_write_codec ( devc, 4, 0x1F );
+                sscape_pnp_write_codec ( devc, 5, 0x1F );
+                sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable);
+        } else {
+                int t;
+                sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1);
+                sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1));
+
+                t = sscape_pnp_read_codec( devc, 0x00) & 0xDF;
+                if ( (sscape_mic_enable == 0)) t |= 0;
+                else t |= 0x20;
+                sscape_pnp_write_codec ( devc, 0x00, t);
+                t = sscape_pnp_read_codec( devc, 0x01) & 0xDF;
+                if ( (sscape_mic_enable == 0) ) t |= 0;
+                else t |= 0x20;
+                sscape_pnp_write_codec ( devc, 0x01, t);
+                sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20);
+                outb(0, devc -> codec);
+        }
+        if (devc -> ic_type == IC_OPUS ) {
+                int i = sscape_read( devc, 9 );
+                sscape_write( devc, 9, i | 3 );
+                sscape_write( devc, 3, 0x40);
+
+                if (request_region(0x228, 1, "sscape setup junk")) {
+                        outb(0, 0x228);
+                        release_region(0x228,1);
+                }
+                sscape_write( devc, 3, (devc -> dma << 4) | 0x80);
+                sscape_write( devc, 9, i );
+        }
+        
+        host_close ( devc );
+        sscape_pnp_free_dma(devc);
+}
+
+static int __init detect_sscape_pnp(sscape_info* devc)
+{
+        long     i, irq_bits = 0xff;
+        unsigned int d;
+
+        DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base));
+
+        if (!request_region(devc->codec, 2, "sscape codec")) {
+                printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec);       
+                return 0;
+        }
+
+        if ((inb(devc->base + 2) & 0x78) != 0)
+                goto fail;
+
+        d = inb ( devc -> base + 4) & 0xF0;
+        if (d & 0x80)
+                goto fail;
+        
+        if (d == 0) {
+                devc->codec_type = 1;
+                devc->ic_type = IC_ODIE;
+        } else if ( (d & 0x60) != 0) {
+                devc->codec_type = 2;
+                devc->ic_type = IC_OPUS;
+        } else if ( (d & 0x40) != 0) {  /* WTF? */
+                devc->codec_type = 2;
+                devc->ic_type = IC_ODIE;
+        } else
+                goto fail;
+        
+        sscape_is_pnp = 1;
+                
+        outb(0xFA, devc -> base+4);
+        if  ((inb( devc -> base+4) & 0x9F) != 0x0A)
+                goto fail;
+        outb(0xFE, devc -> base+4);
+        if  ( (inb(devc -> base+4) & 0x9F) != 0x0E)
+                goto fail;
+        if  ( (inb(devc -> base+5) & 0x9F) != 0x0E)
+                goto fail;
+
+        if (devc->codec_type == 2) {
+                if (devc->codec != devc->base + 8) {
+                        printk("soundscape warning: incorrect codec port specified\n");
+                        goto fail;
+                }
+                d = 0x10 | (sscape_read(devc, 9)  & 0xCF);
+                sscape_write(devc, 9, d);
+                sscape_write(devc, 6, 0x80);
+        } else {
+                //todo: check codec is not base + 8
+        }
+
+        d  = (sscape_read(devc, 9) & 0x3F) | 0xC0;
+        sscape_write(devc, 9, d);
+
+        for (i = 0; i < 550000; i++)
+                if ( !(inb(devc -> codec) & 0x80) ) break;
+
+        d = inb(devc -> codec);
+        if (d & 0x80)
+                goto fail;
+        if ( inb(devc -> codec + 2) == 0xFF)
+                goto fail;
+
+        sscape_write(devc, 9, sscape_read(devc, 9)  & 0x3F );
+
+        d  = inb(devc -> codec) & 0x80;
+        if ( d == 0) {
+                printk(KERN_INFO "soundscape: hardware detected\n");
+                valid_interrupts = valid_interrupts_new;
+        } else  {
+                printk(KERN_INFO "soundscape: board looks like media fx\n");
+                valid_interrupts = valid_interrupts_old;
+                old_hardware = 1;
+        }
+
+        sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9)  & 0x3F) );
+
+        for (i = 0; i < 550000; i++)
+                if ( !(inb(devc -> codec) & 0x80)) 
+                        break;
+                
+        sscape_pnp_init_hw(devc);
+
+        for (i = 0; i < 4; i++)
+        {
+                if (devc->codec_irq == valid_interrupts[i]) {
+                        irq_bits = i;
+                        break;
+                }
+        }       
+        sscape_write(devc, GA_INTENA_REG, 0x00);
+        sscape_write(devc, GA_DMACFG_REG, 0x50);
+        sscape_write(devc, GA_DMAA_REG, 0x70);
+        sscape_write(devc, GA_DMAB_REG, 0x20);
+        sscape_write(devc, GA_INTCFG_REG, 0xf0);
+        sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1));
+
+        sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20);
+        sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20);
+
+        return 1;
+fail:
+        release_region(devc->codec, 2);
+        return 0;
+}
+
+static int __init probe_sscape(struct address_info *hw_config)
+{
+        devc->base = hw_config->io_base;
+        devc->irq = hw_config->irq;
+        devc->dma = hw_config->dma;
+        devc->osp = hw_config->osp;
+
+#ifdef SSCAPE_DEBUG1
+        /*
+         * Temporary debugging aid. Print contents of the registers before
+         * changing them.
+         */
+        {
+                int i;
+
+                for (i = 0; i < 13; i++)
+                        printk("I%d = %02x (old value)\n", i, sscape_read(devc, i));
+        }
+#endif
+        devc->failed = 1;
+
+        sscape_ports = request_region(devc->base, 2, "mpu401");
+        if (!sscape_ports)
+                return 0;
+
+        if (!request_region(devc->base + 2, 6, "SoundScape")) {
+                release_region(devc->base, 2);
+                return 0;
+        }
+
+        if (!detect_ga(devc)) {
+                if (detect_sscape_pnp(devc))
+                        return 1;
+                release_region(devc->base, 2);
+                release_region(devc->base + 2, 6);
+                return 0;
+        }
+
+        if (old_hardware)       /* Check that it's really an old Spea/Reveal card. */
+        {
+                unsigned char   tmp;
+                int             cc;
+
+                if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0))
+                {
+                        sscape_write(devc, GA_HMCTL_REG, tmp | 0x80);
+                        for (cc = 0; cc < 200000; ++cc)
+                                inb(devc->base + ODIE_ADDR);
+                }
+        }
+        return 1;
+}
+
+static int __init init_ss_ms_sound(struct address_info *hw_config)
+{
+        int i, irq_bits = 0xff;
+        int ad_flags = 0;
+        struct resource *ports;
+        
+        if (devc->failed)
+        {
+                printk(KERN_ERR "soundscape: Card not detected\n");
+                return 0;
+        }
+        if (devc->ok == 0)
+        {
+                printk(KERN_ERR "soundscape: Invalid initialization order.\n");
+                return 0;
+        }
+        for (i = 0; i < 4; i++)
+        {
+                if (hw_config->irq == valid_interrupts[i])
+                {
+                        irq_bits = i;
+                        break;
+                }
+        }
+        if (irq_bits == 0xff) {
+                printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq);
+                return 0;
+        }
+        
+        if (old_hardware)
+                ad_flags = 0x12345677;  /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */
+        else if (sscape_is_pnp)
+                ad_flags = 0x87654321;  /* Tell that we have a soundscape pnp with 1845 chip */
+
+        ports = request_region(hw_config->io_base, 4, "ad1848");
+        if (!ports) {
+                printk(KERN_ERR "soundscape: ports busy\n");
+                return 0;
+        }
+
+        if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) {
+                release_region(hw_config->io_base, 4);
+                return 0;
+        }
+
+        if (!sscape_is_pnp)  /*pnp is already setup*/
+        {
+                /*
+                 * Setup the DMA polarity.
+                 */
+                sscape_write(devc, GA_DMACFG_REG, 0x50);
+        
+                /*
+                 * Take the gate-array off of the DMA channel.
+                 */
+                sscape_write(devc, GA_DMAB_REG, 0x20);
+        
+                /*
+                 * Init the AD1848 (CD-ROM) config reg.
+                 */
+                sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1));
+        }
+        
+        if (hw_config->irq == devc->irq)
+                printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n");
+                                
+        hw_config->slots[0] = ad1848_init(
+                        sscape_is_pnp ? "SoundScape" : "SoundScape PNP",
+                        ports,
+                        hw_config->irq,
+                        hw_config->dma,
+                        hw_config->dma,
+                        0,
+                        devc->osp,
+                        THIS_MODULE);
+
+                                          
+        if (hw_config->slots[0] != -1)  /* The AD1848 driver installed itself */
+        {
+                audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations;
+                devc->codec_audiodev = hw_config->slots[0];
+                devc->my_audiodev = hw_config->slots[0];
+
+                /* Set proper routings here (what are they) */
+                AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
+        }
+                
+#ifdef SSCAPE_DEBUG5
+        /*
+         * Temporary debugging aid. Print contents of the registers
+         * after the AD1848 device has been initialized.
+         */
+        {
+                int i;
+
+                for (i = 0; i < 13; i++)
+                        printk("I%d = %02x\n", i, sscape_read(devc, i));
+        }
+#endif
+        return 1;
+}
+
+static void __exit unload_sscape(struct address_info *hw_config)
+{
+        release_region(devc->base + 2, 6);
+        unload_mpu401(hw_config);
+        if (sscape_is_pnp)
+                release_region(devc->codec, 2);
+}
+
+static void __exit unload_ss_ms_sound(struct address_info *hw_config)
+{
+        ad1848_unload(hw_config->io_base,
+                      hw_config->irq,
+                      devc->dma,
+                      devc->dma,
+                      0);
+        sound_unload_audiodev(hw_config->slots[0]);
+}
+
+static struct address_info cfg;
+static struct address_info cfg_mpu;
+
+static int __initdata spea = -1;
+static int mss = 0;
+static int __initdata dma = -1;
+static int __initdata irq = -1;
+static int __initdata io = -1;
+static int __initdata mpu_irq = -1;
+static int __initdata mpu_io = -1;
+
+module_param(dma, int, 0);
+module_param(irq, int, 0);
+module_param(io, int, 0);
+module_param(spea, int, 0);             /* spea=0/1 set the old_hardware */
+module_param(mpu_irq, int, 0);
+module_param(mpu_io, int, 0);
+module_param(mss, int, 0);
+
+static int __init init_sscape(void)
+{
+        printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n");
+        
+        cfg.irq = irq;
+        cfg.dma = dma;
+        cfg.io_base = io;
+
+        cfg_mpu.irq = mpu_irq;
+        cfg_mpu.io_base = mpu_io;
+        /* WEH - Try to get right dma channel */
+        cfg_mpu.dma = dma;
+        
+        devc->codec = cfg.io_base;
+        devc->codec_irq = cfg.irq;
+        devc->codec_type = 0;
+        devc->ic_type = 0;
+        devc->raw_buf = NULL;
+        spin_lock_init(&devc->lock);
+
+        if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) {
+                printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n");
+                return -EINVAL;
+        }
+        
+        if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) {
+                printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n");
+                return -EINVAL;
+        }
+        
+        if(spea != -1) {
+                old_hardware = spea;
+                printk(KERN_INFO "Forcing %s hardware support.\n",
+                        spea?"new":"old");
+        }       
+        if (probe_sscape(&cfg_mpu) == 0)
+                return -ENODEV;
+
+        attach_sscape(&cfg_mpu);
+        
+        mss = init_ss_ms_sound(&cfg);
+
+        return 0;
+}
+
+static void __exit cleanup_sscape(void)
+{
+        if (mss)
+                unload_ss_ms_sound(&cfg);
+        unload_sscape(&cfg_mpu);
+}
+
+module_init(init_sscape);
+module_exit(cleanup_sscape);
+
+#ifndef MODULE
+static int __init setup_sscape(char *str)
+{
+        /* io, irq, dma, mpu_io, mpu_irq */
+        int ints[6];
+        
+        str = get_options(str, ARRAY_SIZE(ints), ints);
+        
+        io      = ints[1];
+        irq     = ints[2];
+        dma     = ints[3];
+        mpu_io  = ints[4];
+        mpu_irq = ints[5];
+
+        return 1;
+}
+
+__setup("sscape=", setup_sscape);
+#endif
+MODULE_LICENSE("GPL");