Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 248 insertions, 0 deletions

diff --git a/sound/oss/hal2.h b/sound/oss/hal2.h
new file mode 100644
index 000000000000..2bd3b52d8a37
--- /dev/null
+++ b/sound/oss/hal2.h
@@ -0,0 +1,248 @@
+#ifndef __HAL2_H
+#define __HAL2_H
+
+/*
+ *  Driver for HAL2 sound processors
+ *  Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se>
+ *  Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as 
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <asm/addrspace.h>
+#include <asm/sgi/hpc3.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/* Indirect status register */
+
+#define H2_ISR_TSTATUS          0x01    /* RO: transaction status 1=busy */
+#define H2_ISR_USTATUS          0x02    /* RO: utime status bit 1=armed */
+#define H2_ISR_QUAD_MODE        0x04    /* codec mode 0=indigo 1=quad */
+#define H2_ISR_GLOBAL_RESET_N   0x08    /* chip global reset 0=reset */
+#define H2_ISR_CODEC_RESET_N    0x10    /* codec/synth reset 0=reset  */
+
+/* Revision register */
+
+#define H2_REV_AUDIO_PRESENT    0x8000  /* RO: audio present 0=present */
+#define H2_REV_BOARD_M          0x7000  /* RO: bits 14:12, board revision */
+#define H2_REV_MAJOR_CHIP_M     0x00F0  /* RO: bits 7:4, major chip revision */
+#define H2_REV_MINOR_CHIP_M     0x000F  /* RO: bits 3:0, minor chip revision */
+
+/* Indirect address register */
+
+/*
+ * Address of indirect internal register to be accessed. A write to this
+ * register initiates read or write access to the indirect registers in the
+ * HAL2. Note that there af four indirect data registers for write access to
+ * registers larger than 16 byte.
+ */
+
+#define H2_IAR_TYPE_M           0xF000  /* bits 15:12, type of functional */
+                                        /* block the register resides in */
+                                        /* 1=DMA Port */
+                                        /* 9=Global DMA Control */
+                                        /* 2=Bresenham */
+                                        /* 3=Unix Timer */
+#define H2_IAR_NUM_M            0x0F00  /* bits 11:8 instance of the */
+                                        /* blockin which the indirect */
+                                        /* register resides */
+                                        /* If IAR_TYPE_M=DMA Port: */
+                                        /* 1=Synth In */
+                                        /* 2=AES In */
+                                        /* 3=AES Out */
+                                        /* 4=DAC Out */
+                                        /* 5=ADC Out */
+                                        /* 6=Synth Control */
+                                        /* If IAR_TYPE_M=Global DMA Control: */
+                                        /* 1=Control */
+                                        /* If IAR_TYPE_M=Bresenham: */
+                                        /* 1=Bresenham Clock Gen 1 */
+                                        /* 2=Bresenham Clock Gen 2 */
+                                        /* 3=Bresenham Clock Gen 3 */
+                                        /* If IAR_TYPE_M=Unix Timer: */
+                                        /* 1=Unix Timer */
+#define H2_IAR_ACCESS_SELECT    0x0080  /* 1=read 0=write */
+#define H2_IAR_PARAM            0x000C  /* Parameter Select */
+#define H2_IAR_RB_INDEX_M       0x0003  /* Read Back Index */
+                                        /* 00:word0 */
+                                        /* 01:word1 */
+                                        /* 10:word2 */
+                                        /* 11:word3 */
+/*
+ * HAL2 internal addressing
+ *
+ * The HAL2 has "indirect registers" (idr) which are accessed by writing to the
+ * Indirect Data registers. Write the address to the Indirect Address register
+ * to transfer the data.
+ *
+ * We define the H2IR_* to the read address and H2IW_* to the write address and
+ * H2I_* to be fields in whatever register is referred to.
+ *
+ * When we write to indirect registers which are larger than one word (16 bit)
+ * we have to fill more than one indirect register before writing. When we read
+ * back however we have to read several times, each time with different Read
+ * Back Indexes (there are defs for doing this easily).
+ */
+
+/*
+ * Relay Control
+ */
+#define H2I_RELAY_C             0x9100
+#define H2I_RELAY_C_STATE       0x01            /* state of RELAY pin signal */
+
+/* DMA port enable */
+
+#define H2I_DMA_PORT_EN         0x9104
+#define H2I_DMA_PORT_EN_SY_IN   0x01            /* Synth_in DMA port */
+#define H2I_DMA_PORT_EN_AESRX   0x02            /* AES receiver DMA port */
+#define H2I_DMA_PORT_EN_AESTX   0x04            /* AES transmitter DMA port */
+#define H2I_DMA_PORT_EN_CODECTX 0x08            /* CODEC transmit DMA port */
+#define H2I_DMA_PORT_EN_CODECR  0x10            /* CODEC receive DMA port */
+
+#define H2I_DMA_END             0x9108          /* global dma endian select */
+#define H2I_DMA_END_SY_IN       0x01            /* Synth_in DMA port */
+#define H2I_DMA_END_AESRX       0x02            /* AES receiver DMA port */
+#define H2I_DMA_END_AESTX       0x04            /* AES transmitter DMA port */
+#define H2I_DMA_END_CODECTX     0x08            /* CODEC transmit DMA port */
+#define H2I_DMA_END_CODECR      0x10            /* CODEC receive DMA port */
+                                                /* 0=b_end 1=l_end */
+
+#define H2I_DMA_DRV             0x910C          /* global PBUS DMA enable */
+
+#define H2I_SYNTH_C             0x1104          /* Synth DMA control */
+
+#define H2I_AESRX_C             0x1204          /* AES RX dma control */
+
+#define H2I_C_TS_EN             0x20            /* Timestamp enable */
+#define H2I_C_TS_FRMT           0x40            /* Timestamp format */
+#define H2I_C_NAUDIO            0x80            /* Sign extend */
+
+/* AESRX CTL, 16 bit */
+
+#define H2I_AESTX_C             0x1304          /* AES TX DMA control */
+#define H2I_AESTX_C_CLKID_SHIFT 3               /* Bresenham Clock Gen 1-3 */
+#define H2I_AESTX_C_CLKID_M     0x18
+#define H2I_AESTX_C_DATAT_SHIFT 8               /* 1=mono 2=stereo (3=quad) */
+#define H2I_AESTX_C_DATAT_M     0x300
+
+/* CODEC registers */
+
+#define H2I_DAC_C1              0x1404          /* DAC DMA control, 16 bit */
+#define H2I_DAC_C2              0x1408          /* DAC DMA control, 32 bit */
+#define H2I_ADC_C1              0x1504          /* ADC DMA control, 16 bit */
+#define H2I_ADC_C2              0x1508          /* ADC DMA control, 32 bit */
+
+/* Bits in CTL1 register */
+
+#define H2I_C1_DMA_SHIFT        0               /* DMA channel */
+#define H2I_C1_DMA_M            0x7
+#define H2I_C1_CLKID_SHIFT      3               /* Bresenham Clock Gen 1-3 */
+#define H2I_C1_CLKID_M          0x18
+#define H2I_C1_DATAT_SHIFT      8               /* 1=mono 2=stereo (3=quad) */
+#define H2I_C1_DATAT_M          0x300
+
+/* Bits in CTL2 register */
+
+#define H2I_C2_R_GAIN_SHIFT     0               /* right a/d input gain */      
+#define H2I_C2_R_GAIN_M         0xf     
+#define H2I_C2_L_GAIN_SHIFT     4               /* left a/d input gain */
+#define H2I_C2_L_GAIN_M         0xf0
+#define H2I_C2_R_SEL            0x100           /* right input select */
+#define H2I_C2_L_SEL            0x200           /* left input select */
+#define H2I_C2_MUTE             0x400           /* mute */
+#define H2I_C2_DO1              0x00010000      /* digital output port bit 0 */
+#define H2I_C2_DO2              0x00020000      /* digital output port bit 1 */
+#define H2I_C2_R_ATT_SHIFT      18              /* right d/a output - */
+#define H2I_C2_R_ATT_M          0x007c0000      /* attenuation */
+#define H2I_C2_L_ATT_SHIFT      23              /* left d/a output - */
+#define H2I_C2_L_ATT_M          0x0f800000      /* attenuation */
+
+#define H2I_SYNTH_MAP_C         0x1104          /* synth dma handshake ctrl */
+
+/* Clock generator CTL 1, 16 bit */
+
+#define H2I_BRES1_C1            0x2104
+#define H2I_BRES2_C1            0x2204
+#define H2I_BRES3_C1            0x2304
+
+#define H2I_BRES_C1_SHIFT       0               /* 0=48.0 1=44.1 2=aes_rx */
+#define H2I_BRES_C1_M           0x03
+                                
+/* Clock generator CTL 2, 32 bit */
+
+#define H2I_BRES1_C2            0x2108
+#define H2I_BRES2_C2            0x2208
+#define H2I_BRES3_C2            0x2308
+
+#define H2I_BRES_C2_INC_SHIFT   0               /* increment value */
+#define H2I_BRES_C2_INC_M       0xffff
+#define H2I_BRES_C2_MOD_SHIFT   16              /* modcontrol value */
+#define H2I_BRES_C2_MOD_M       0xffff0000      /* modctrl=0xffff&(modinc-1) */
+
+/* Unix timer, 64 bit */
+
+#define H2I_UTIME               0x3104
+#define H2I_UTIME_0_LD          0xffff          /* microseconds, LSB's */
+#define H2I_UTIME_1_LD0         0x0f            /* microseconds, MSB's */
+#define H2I_UTIME_1_LD1         0xf0            /* tenths of microseconds */
+#define H2I_UTIME_2_LD          0xffff          /* seconds, LSB's */
+#define H2I_UTIME_3_LD          0xffff          /* seconds, MSB's */
+
+struct hal2_ctl_regs {
+        u32 _unused0[4];
+        volatile u32 isr;               /* 0x10 Status Register */
+        u32 _unused1[3];
+        volatile u32 rev;               /* 0x20 Revision Register */
+        u32 _unused2[3];
+        volatile u32 iar;               /* 0x30 Indirect Address Register */
+        u32 _unused3[3];
+        volatile u32 idr0;              /* 0x40 Indirect Data Register 0 */
+        u32 _unused4[3];
+        volatile u32 idr1;              /* 0x50 Indirect Data Register 1 */
+        u32 _unused5[3];
+        volatile u32 idr2;              /* 0x60 Indirect Data Register 2 */
+        u32 _unused6[3];
+        volatile u32 idr3;              /* 0x70 Indirect Data Register 3 */
+};
+
+struct hal2_aes_regs {
+        volatile u32 rx_stat[2];        /* Status registers */
+        volatile u32 rx_cr[2];          /* Control registers */
+        volatile u32 rx_ud[4];          /* User data window */
+        volatile u32 rx_st[24];         /* Channel status data */
+        
+        volatile u32 tx_stat[1];        /* Status register */
+        volatile u32 tx_cr[3];          /* Control registers */
+        volatile u32 tx_ud[4];          /* User data window */
+        volatile u32 tx_st[24];         /* Channel status data */
+};
+
+struct hal2_vol_regs {
+        volatile u32 right;             /* Right volume */
+        volatile u32 left;              /* Left volume */
+};
+
+struct hal2_syn_regs {
+        u32 _unused0[2];
+        volatile u32 page;              /* DOC Page register */
+        volatile u32 regsel;            /* DOC Register selection */
+        volatile u32 dlow;              /* DOC Data low */
+        volatile u32 dhigh;             /* DOC Data high */
+        volatile u32 irq;               /* IRQ Status */
+        volatile u32 dram;              /* DRAM Access */
+};
+
+#endif  /* __HAL2_H */