Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (294 commits)
  S3C64XX: Staticise platform data for PCM devices
  ASoC: Rename controls with a / in wm_hubs
  snd-fm801: autodetect SF64-PCR (tuner-only) card
  ALSA: tea575x-tuner: fix mute
  ASoC: au1x: dbdma2: plug memleak in pcm device creation error path
  ASoC: au1x: dbdma2: fix oops on soc device removal.
  ALSA: hda - Fix memory leaks in the previous patch
  ALSA: hda - Add ALC661/259, ALC892/888VD support
  ALSA: opti9xx: remove snd_opti9xx fields
  ALSA: aaci - Clean up duplicate code
  ALSA: usb - Fix mixer map for Hercules Gamesurround Muse Pocket LT
  ALSA: hda - Add position_fix quirk for HP dv3
  ALSA: hda - Add a pin-fix for FSC Amilo Pi1505
  ALSA: hda - Fix Cxt5047 test mode
  ASoC: pxa/raumfeld: adopt new snd_soc_dai_set_pll() API
  ASoC: sh: fsi: Add runtime PM support
  sh: ms7724se: Add runtime PM support for FSI
  ALSA: hda - Add a position_fix quirk for MSI Wind U115
  ALSA: opti-miro: add PnP detection
  ALSA: opti-miro: separate comon probing code
  ...

1 files changed, 319 insertions, 408 deletions

diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 66187122377c..e2d5d2d3ed96 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -1,5 +1,5 @@
 /*
- *   Low-level ALSA driver for the ENSONIQ SoundScape PnP
+ *   Low-level ALSA driver for the ENSONIQ SoundScape
  *   Copyright (c) by Chris Rankin
  *
  *   This driver was written in part using information obtained from
@@ -25,31 +25,36 @@
 #include <linux/err.h>
 #include <linux/isa.h>
 #include <linux/delay.h>
+#include <linux/firmware.h>
 #include <linux/pnp.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
 #include <asm/dma.h>
 #include <sound/core.h>
-#include <sound/hwdep.h>
 #include <sound/wss.h>
 #include <sound/mpu401.h>
 #include <sound/initval.h>
 
-#include <sound/sscape_ioctl.h>
-
 
 MODULE_AUTHOR("Chris Rankin");
-MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver");
+MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
 MODULE_LICENSE("GPL");
-
-static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX;
-static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR;
-static long port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT;
-static long wss_port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT;
-static int irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ;
-static int mpu_irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ;
-static int dma[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA;
-static int dma2[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA;
+MODULE_FIRMWARE("sndscape.co0");
+MODULE_FIRMWARE("sndscape.co1");
+MODULE_FIRMWARE("sndscape.co2");
+MODULE_FIRMWARE("sndscape.co3");
+MODULE_FIRMWARE("sndscape.co4");
+MODULE_FIRMWARE("scope.cod");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static bool joystick[SNDRV_CARDS];
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
@@ -75,6 +80,9 @@ MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
 module_param_array(dma2, int, NULL, 0444);
 MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
 
+module_param_array(joystick, bool, NULL, 0444);
+MODULE_PARM_DESC(joystick, "Enable gameport.");
+
 #ifdef CONFIG_PNP
 static int isa_registered;
 static int pnp_registered;
@@ -101,14 +109,14 @@ MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
 #define RX_READY 0x01
 #define TX_READY 0x02
 
-#define CMD_ACK           0x80
-#define CMD_SET_MIDI_VOL  0x84
-#define CMD_GET_MIDI_VOL  0x85
-#define CMD_XXX_MIDI_VOL  0x86
-#define CMD_SET_EXTMIDI   0x8a
-#define CMD_GET_EXTMIDI   0x8b
-#define CMD_SET_MT32      0x8c
-#define CMD_GET_MT32      0x8d
+#define CMD_ACK                 0x80
+#define CMD_SET_MIDI_VOL        0x84
+#define CMD_GET_MIDI_VOL        0x85
+#define CMD_XXX_MIDI_VOL        0x86
+#define CMD_SET_EXTMIDI         0x8a
+#define CMD_GET_EXTMIDI         0x8b
+#define CMD_SET_MT32            0x8c
+#define CMD_GET_MT32            0x8d
 
 enum GA_REG {
         GA_INTSTAT_REG = 0,
@@ -127,7 +135,8 @@ enum GA_REG {
 
 
 enum card_type {
-        SSCAPE,
+        MEDIA_FX,       /* Sequoia S-1000 */
+        SSCAPE,         /* Sequoia S-2000 */
         SSCAPE_PNP,
         SSCAPE_VIVO,
 };
@@ -140,16 +149,7 @@ struct soundscape {
         struct resource *io_res;
         struct resource *wss_res;
         struct snd_wss *chip;
-        struct snd_mpu401 *mpu;
-        struct snd_hwdep *hw;
 
-        /*
-         * The MIDI device won't work until we've loaded
-         * its firmware via a hardware-dependent device IOCTL
-         */
-        spinlock_t fwlock;
-        int hw_in_use;
-        unsigned long midi_usage;
         unsigned char midi_vol;
 };
 
@@ -161,28 +161,21 @@ static inline struct soundscape *get_card_soundscape(struct snd_card *c)
         return (struct soundscape *) (c->private_data);
 }
 
-static inline struct soundscape *get_mpu401_soundscape(struct snd_mpu401 * mpu)
-{
-        return (struct soundscape *) (mpu->private_data);
-}
-
-static inline struct soundscape *get_hwdep_soundscape(struct snd_hwdep * hw)
-{
-        return (struct soundscape *) (hw->private_data);
-}
-
-
 /*
  * Allocates some kernel memory that we can use for DMA.
  * I think this means that the memory has to map to
  * contiguous pages of physical memory.
  */
-static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size)
+static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf,
+                                         unsigned long size)
 {
         if (buf) {
-                if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(),
+                if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
+                                                 snd_dma_isa_data(),
                                                  size, buf) < 0) {
-                        snd_printk(KERN_ERR "sscape: Failed to allocate %lu bytes for DMA\n", size);
+                        snd_printk(KERN_ERR "sscape: Failed to allocate "
+                                            "%lu bytes for DMA\n",
+                                            size);
                         return NULL;
                 }
         }
@@ -199,13 +192,13 @@ static void free_dmabuf(struct snd_dma_buffer *buf)
                 snd_dma_free_pages(buf);
 }
 
-
 /*
  * This function writes to the SoundScape's control registers,
  * but doesn't do any locking. It's up to the caller to do that.
  * This is why this function is "unsafe" ...
  */
-static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val)
+static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
+                                       unsigned char val)
 {
         outb(reg, ODIE_ADDR_IO(io_base));
         outb(val, ODIE_DATA_IO(io_base));
@@ -215,7 +208,8 @@ static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsign
  * Write to the SoundScape's control registers, and do the
  * necessary locking ...
  */
-static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val)
+static void sscape_write(struct soundscape *s, enum GA_REG reg,
+                         unsigned char val)
 {
         unsigned long flags;
 
@@ -228,7 +222,8 @@ static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char va
  * Read from the SoundScape's control registers, but leave any
  * locking to the caller. This is why the function is "unsafe" ...
  */
-static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg)
+static inline unsigned char sscape_read_unsafe(unsigned io_base,
+                                               enum GA_REG reg)
 {
         outb(reg, ODIE_ADDR_IO(io_base));
         return inb(ODIE_DATA_IO(io_base));
@@ -257,9 +252,8 @@ static inline void set_midi_mode_unsafe(unsigned io_base)
 static inline int host_read_unsafe(unsigned io_base)
 {
         int data = -1;
-        if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) {
+        if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
                 data = inb(HOST_DATA_IO(io_base));
-        }
 
         return data;
 }
@@ -301,7 +295,7 @@ static inline int host_write_unsafe(unsigned io_base, unsigned char data)
  * Also leaves all locking-issues to the caller ...
  */
 static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
-                                  unsigned timeout)
+                                  unsigned timeout)
 {
         int err;
 
@@ -320,7 +314,7 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
  *
  * NOTE: This check is based upon observation, not documentation.
  */
-static inline int verify_mpu401(const struct snd_mpu401 * mpu)
+static inline int verify_mpu401(const struct snd_mpu401 *mpu)
 {
         return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
 }
@@ -328,7 +322,7 @@ static inline int verify_mpu401(const struct snd_mpu401 * mpu)
 /*
  * This is apparently the standard way to initailise an MPU-401
  */
-static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
+static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
 {
         outb(0, MPU401D(mpu));
 }
@@ -338,9 +332,10 @@ static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
  * The AD1845 detection fails if we *don't* do this, so I
  * think that this is a good idea ...
  */
-static inline void activate_ad1845_unsafe(unsigned io_base)
+static void activate_ad1845_unsafe(unsigned io_base)
 {
-        sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10);
+        unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
+        sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
         sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
 }
 
@@ -359,24 +354,27 @@ static void soundscape_free(struct snd_card *c)
  * Tell the SoundScape to begin a DMA tranfer using the given channel.
  * All locking issues are left to the caller.
  */
-static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
+static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
 {
-        sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01);
-        sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe);
+        sscape_write_unsafe(io_base, reg,
+                            sscape_read_unsafe(io_base, reg) | 0x01);
+        sscape_write_unsafe(io_base, reg,
+                            sscape_read_unsafe(io_base, reg) & 0xfe);
 }
 
 /*
  * Wait for a DMA transfer to complete. This is a "limited busy-wait",
  * and all locking issues are left to the caller.
  */
-static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout)
+static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
+                                  unsigned timeout)
 {
         while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
                 udelay(100);
                 --timeout;
         } /* while */
 
-        return (sscape_read_unsafe(io_base, reg) & 0x01);
+        return sscape_read_unsafe(io_base, reg) & 0x01;
 }
 
 /*
@@ -392,12 +390,12 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)
 
         do {
                 unsigned long flags;
-                unsigned char x;
+                int x;
 
                 spin_lock_irqsave(&s->lock, flags);
-                x = inb(HOST_DATA_IO(s->io_base));
+                x = host_read_unsafe(s->io_base);
                 spin_unlock_irqrestore(&s->lock, flags);
-                if ((x & 0xfe) == 0xfe)
+                if (x == 0xfe || x == 0xff)
                         return 1;
 
                 msleep(10);
@@ -419,10 +417,10 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout)
 
         do {
                 unsigned long flags;
-                unsigned char x;
+                int x;
 
                 spin_lock_irqsave(&s->lock, flags);
-                x = inb(HOST_DATA_IO(s->io_base));
+                x = host_read_unsafe(s->io_base);
                 spin_unlock_irqrestore(&s->lock, flags);
                 if (x == 0xfe)
                         return 1;
@@ -436,15 +434,15 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout)
 /*
  * Upload a byte-stream into the SoundScape using DMA channel A.
  */
-static int upload_dma_data(struct soundscape *s,
-                           const unsigned char __user *data,
-                           size_t size)
+static int upload_dma_data(struct soundscape *s, const unsigned char *data,
+                           size_t size)
 {
         unsigned long flags;
         struct snd_dma_buffer dma;
         int ret;
+        unsigned char val;
 
-        if (!get_dmabuf(&dma, PAGE_ALIGN(size)))
+        if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
                 return -ENOMEM;
 
         spin_lock_irqsave(&s->lock, flags);
@@ -452,70 +450,57 @@ static int upload_dma_data(struct soundscape *s,
         /*
          * Reset the board ...
          */
-        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f);
+        val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
 
         /*
          * Enable the DMA channels and configure them ...
          */
-        sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50);
-        sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT);
+        val = (s->chip->dma1 << 4) | DMA_8BIT;
+        sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
         sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
 
         /*
          * Take the board out of reset ...
          */
-        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80);
+        val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
 
         /*
-         * Upload the user's data (firmware?) to the SoundScape
+         * Upload the firmware to the SoundScape
          * board through the DMA channel ...
          */
         while (size != 0) {
                 unsigned long len;
 
-                /*
-                 * Apparently, copying to/from userspace can sleep.
-                 * We are therefore forbidden from holding any
-                 * spinlocks while we copy ...
-                 */
-                spin_unlock_irqrestore(&s->lock, flags);
-
-                /*
-                 * Remember that the data that we want to DMA
-                 * comes from USERSPACE. We have already verified
-                 * the userspace pointer ...
-                 */
                 len = min(size, dma.bytes);
-                len -= __copy_from_user(dma.area, data, len);
+                memcpy(dma.area, data, len);
                 data += len;
                 size -= len;
 
-                /*
-                 * Grab that spinlock again, now that we've
-                 * finished copying!
-                 */
-                spin_lock_irqsave(&s->lock, flags);
-
                 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
                 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
                 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
                         /*
-                         * Don't forget to release this spinlock we're holding ...
+                         * Don't forget to release this spinlock we're holding
                          */
                         spin_unlock_irqrestore(&s->lock, flags);
 
-                        snd_printk(KERN_ERR "sscape: DMA upload has timed out\n");
+                        snd_printk(KERN_ERR
+                                        "sscape: DMA upload has timed out\n");
                         ret = -EAGAIN;
                         goto _release_dma;
                 }
         } /* while */
 
         set_host_mode_unsafe(s->io_base);
+        outb(0x0, s->io_base);
 
         /*
          * Boot the board ... (I think)
          */
-        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40);
+        val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
         spin_unlock_irqrestore(&s->lock, flags);
 
         /*
@@ -525,10 +510,12 @@ static int upload_dma_data(struct soundscape *s,
          */
         ret = 0;
         if (!obp_startup_ack(s, 5000)) {
-                snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n");
+                snd_printk(KERN_ERR "sscape: No response "
+                                    "from on-board processor after upload\n");
                 ret = -EAGAIN;
         } else if (!host_startup_ack(s, 5000)) {
-                snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n");
+                snd_printk(KERN_ERR
+                                "sscape: SoundScape failed to initialise\n");
                 ret = -EAGAIN;
         }
 
@@ -536,7 +523,7 @@ _release_dma:
         /*
          * NOTE!!! We are NOT holding any spinlocks at this point !!!
          */
-        sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40));
+        sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
         free_dmabuf(&dma);
 
         return ret;
@@ -546,167 +533,76 @@ _release_dma:
  * Upload the bootblock(?) into the SoundScape. The only
  * purpose of this block of code seems to be to tell
  * us which version of the microcode we should be using.
- *
- * NOTE: The boot-block data resides in USER-SPACE!!!
- *       However, we have already verified its memory
- *       addresses by the time we get here.
  */
-static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb)
+static int sscape_upload_bootblock(struct snd_card *card)
 {
+        struct soundscape *sscape = get_card_soundscape(card);
         unsigned long flags;
+        const struct firmware *init_fw = NULL;
         int data = 0;
         int ret;
 
-        ret = upload_dma_data(sscape, bb->code, sizeof(bb->code));
-
-        spin_lock_irqsave(&sscape->lock, flags);
-        if (ret == 0) {
-                data = host_read_ctrl_unsafe(sscape->io_base, 100);
-        }
-        set_midi_mode_unsafe(sscape->io_base);
-        spin_unlock_irqrestore(&sscape->lock, flags);
-
-        if (ret == 0) {
-                if (data < 0) {
-                        snd_printk(KERN_ERR "sscape: timeout reading firmware version\n");
-                        ret = -EAGAIN;
-                }
-                else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) {
-                        ret = -EFAULT;
-                }
+        ret = request_firmware(&init_fw, "scope.cod", card->dev);
+        if (ret < 0) {
+                snd_printk(KERN_ERR "sscape: Error loading scope.cod");
+                return ret;
         }
+        ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
 
-        return ret;
-}
-
-/*
- * Upload the microcode into the SoundScape. The
- * microcode is 64K of data, and if we try to copy
- * it into a local variable then we will SMASH THE
- * KERNEL'S STACK! We therefore leave it in USER
- * SPACE, and save ourselves from copying it at all.
- */
-static int sscape_upload_microcode(struct soundscape *sscape,
-                                   const struct sscape_microcode __user *mc)
-{
-        unsigned long flags;
-        char __user *code;
-        int err;
+        release_firmware(init_fw);
 
-        /*
-         * We are going to have to copy this data into a special
-         * DMA-able buffer before we can upload it. We shall therefore
-         * just check that the data pointer is valid for now.
-         *
-         * NOTE: This buffer is 64K long! That's WAY too big to
-         *       copy into a stack-temporary anyway.
-         */
-        if ( get_user(code, &mc->code) ||
-             !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) )
-                return -EFAULT;
+        spin_lock_irqsave(&sscape->lock, flags);
+        if (ret == 0)
+                data = host_read_ctrl_unsafe(sscape->io_base, 100);
 
-        if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) {
-                snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n");
-        }
+        if (data & 0x10)
+                sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
 
-        spin_lock_irqsave(&sscape->lock, flags);
-        set_midi_mode_unsafe(sscape->io_base);
         spin_unlock_irqrestore(&sscape->lock, flags);
 
-        initialise_mpu401(sscape->mpu);
+        data &= 0xf;
+        if (ret == 0 && data > 7) {
+                snd_printk(KERN_ERR
+                                "sscape: timeout reading firmware version\n");
+                ret = -EAGAIN;
+        }
 
-        return err;
+        return (ret == 0) ? data : ret;
 }
 
 /*
- * Hardware-specific device functions, to implement special
- * IOCTLs for the SoundScape card. This is how we upload
- * the microcode into the card, for example, and so we
- * must ensure that no two processes can open this device
- * simultaneously, and that we can't open it at all if
- * someone is using the MIDI device.
+ * Upload the microcode into the SoundScape.
  */
-static int sscape_hw_open(struct snd_hwdep * hw, struct file *file)
+static int sscape_upload_microcode(struct snd_card *card, int version)
 {
-        register struct soundscape *sscape = get_hwdep_soundscape(hw);
-        unsigned long flags;
+        struct soundscape *sscape = get_card_soundscape(card);
+        const struct firmware *init_fw = NULL;
+        char name[14];
         int err;
 
-        spin_lock_irqsave(&sscape->fwlock, flags);
+        snprintf(name, sizeof(name), "sndscape.co%d", version);
 
-        if ((sscape->midi_usage != 0) || sscape->hw_in_use) {
-                err = -EBUSY;
-        } else {
-                sscape->hw_in_use = 1;
-                err = 0;
+        err = request_firmware(&init_fw, name, card->dev);
+        if (err < 0) {
+                snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
+                                version);
+                return err;
         }
+        err = upload_dma_data(sscape, init_fw->data, init_fw->size);
+        if (err == 0)
+                snd_printk(KERN_INFO "sscape: MIDI firmware loaded %d KBs\n",
+                                init_fw->size >> 10);
 
-        spin_unlock_irqrestore(&sscape->fwlock, flags);
-        return err;
-}
-
-static int sscape_hw_release(struct snd_hwdep * hw, struct file *file)
-{
-        register struct soundscape *sscape = get_hwdep_soundscape(hw);
-        unsigned long flags;
-
-        spin_lock_irqsave(&sscape->fwlock, flags);
-        sscape->hw_in_use = 0;
-        spin_unlock_irqrestore(&sscape->fwlock, flags);
-        return 0;
-}
-
-static int sscape_hw_ioctl(struct snd_hwdep * hw, struct file *file,
-                           unsigned int cmd, unsigned long arg)
-{
-        struct soundscape *sscape = get_hwdep_soundscape(hw);
-        int err = -EBUSY;
-
-        switch (cmd) {
-        case SND_SSCAPE_LOAD_BOOTB:
-                {
-                        register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg;
-
-                        /*
-                         * We are going to have to copy this data into a special
-                         * DMA-able buffer before we can upload it. We shall therefore
-                         * just check that the data pointer is valid for now ...
-                         */
-                        if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) )
-                                return -EFAULT;
-
-                        /*
-                         * Now check that we can write the firmware version number too...
-                         */
-                        if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) )
-                                return -EFAULT;
-
-                        err = sscape_upload_bootblock(sscape, bb);
-                }
-                break;
-
-        case SND_SSCAPE_LOAD_MCODE:
-                {
-                        register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg;
-
-                        err = sscape_upload_microcode(sscape, mc);
-                }
-                break;
-
-        default:
-                err = -EINVAL;
-                break;
-        } /* switch */
+        release_firmware(init_fw);
 
         return err;
 }
 
-
 /*
  * Mixer control for the SoundScape's MIDI device.
  */
 static int sscape_midi_info(struct snd_kcontrol *ctl,
-                            struct snd_ctl_elem_info *uinfo)
+                            struct snd_ctl_elem_info *uinfo)
 {
         uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
         uinfo->count = 1;
@@ -716,7 +612,7 @@ static int sscape_midi_info(struct snd_kcontrol *ctl,
 }
 
 static int sscape_midi_get(struct snd_kcontrol *kctl,
-                           struct snd_ctl_elem_value *uctl)
+                           struct snd_ctl_elem_value *uctl)
 {
         struct snd_wss *chip = snd_kcontrol_chip(kctl);
         struct snd_card *card = chip->card;
@@ -730,16 +626,18 @@ static int sscape_midi_get(struct snd_kcontrol *kctl,
 }
 
 static int sscape_midi_put(struct snd_kcontrol *kctl,
-                           struct snd_ctl_elem_value *uctl)
+                           struct snd_ctl_elem_value *uctl)
 {
         struct snd_wss *chip = snd_kcontrol_chip(kctl);
         struct snd_card *card = chip->card;
-        register struct soundscape *s = get_card_soundscape(card);
+        struct soundscape *s = get_card_soundscape(card);
         unsigned long flags;
         int change;
+        unsigned char new_val;
 
         spin_lock_irqsave(&s->lock, flags);
 
+        new_val = uctl->value.integer.value[0] & 127;
         /*
          * We need to put the board into HOST mode before we
          * can send any volume-changing HOST commands ...
@@ -752,15 +650,16 @@ static int sscape_midi_put(struct snd_kcontrol *kctl,
          * and then perform another volume-related command. Perhaps the
          * first command is an "open" and the second command is a "close"?
          */
-        if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) {
+        if (s->midi_vol == new_val) {
                 change = 0;
                 goto __skip_change;
         }
-        change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
-                  && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100)
-                  && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100));
-        s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127;
-      __skip_change:
+        change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
+                 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
+                 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
+                 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
+        s->midi_vol = new_val;
+__skip_change:
 
         /*
          * Take the board out of HOST mode and back into MIDI mode ...
@@ -784,20 +683,25 @@ static struct snd_kcontrol_new midi_mixer_ctl = {
  * These IRQs are encoded as bit patterns so that they can be
  * written to the control registers.
  */
-static unsigned __devinit get_irq_config(int irq)
+static unsigned __devinit get_irq_config(int sscape_type, int irq)
 {
         static const int valid_irq[] = { 9, 5, 7, 10 };
+        static const int old_irq[] = { 9, 7, 5, 15 };
         unsigned cfg;
 
-        for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) {
-                if (irq == valid_irq[cfg])
-                        return cfg;
-        } /* for */
+        if (sscape_type == MEDIA_FX) {
+                for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
+                        if (irq == old_irq[cfg])
+                                return cfg;
+        } else {
+                for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
+                        if (irq == valid_irq[cfg])
+                                return cfg;
+        }
 
         return INVALID_IRQ;
 }
 
-
 /*
  * Perform certain arcane port-checks to see whether there
  * is a SoundScape board lurking behind the given ports.
@@ -842,11 +746,38 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io)
         if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
                 goto _done;
 
-        d  = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
-        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+        if (s->ic_type == IC_OPUS)
+                activate_ad1845_unsafe(s->io_base);
 
         if (s->type == SSCAPE_VIVO)
                 wss_io += 4;
+
+        d  = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+
+        /* wait for WSS codec */
+        for (d = 0; d < 500; d++) {
+                if ((inb(wss_io) & 0x80) == 0)
+                        break;
+                spin_unlock_irqrestore(&s->lock, flags);
+                msleep(1);
+                spin_lock_irqsave(&s->lock, flags);
+        }
+
+        if ((inb(wss_io) & 0x80) != 0)
+                goto _done;
+
+        if (inb(wss_io + 2) == 0xff)
+                goto _done;
+
+        d  = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
+        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
+
+        if ((inb(wss_io) & 0x80) != 0)
+                s->type = MEDIA_FX;
+
+        d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+        sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
         /* wait for WSS codec */
         for (d = 0; d < 500; d++) {
                 if ((inb(wss_io) & 0x80) == 0)
@@ -855,14 +786,13 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io)
                 msleep(1);
                 spin_lock_irqsave(&s->lock, flags);
         }
-        snd_printd(KERN_INFO "init delay = %d ms\n", d);
 
         /*
          * SoundScape successfully detected!
          */
         retval = 1;
 
-        _done:
+_done:
         spin_unlock_irqrestore(&s->lock, flags);
         return retval;
 }
@@ -873,63 +803,35 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io)
  * to crash the machine. Also check that someone isn't using the hardware
  * IOCTL device.
  */
-static int mpu401_open(struct snd_mpu401 * mpu)
+static int mpu401_open(struct snd_mpu401 *mpu)
 {
-        int err;
-
         if (!verify_mpu401(mpu)) {
-                snd_printk(KERN_ERR "sscape: MIDI disabled, please load firmware\n");
-                err = -ENODEV;
-        } else {
-                register struct soundscape *sscape = get_mpu401_soundscape(mpu);
-                unsigned long flags;
-
-                spin_lock_irqsave(&sscape->fwlock, flags);
-
-                if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) {
-                        err = -EBUSY;
-                } else {
-                        ++(sscape->midi_usage);
-                        err = 0;
-                }
-
-                spin_unlock_irqrestore(&sscape->fwlock, flags);
+                snd_printk(KERN_ERR "sscape: MIDI disabled, "
+                                    "please load firmware\n");
+                return -ENODEV;
         }
 
-        return err;
-}
-
-static void mpu401_close(struct snd_mpu401 * mpu)
-{
-        register struct soundscape *sscape = get_mpu401_soundscape(mpu);
-        unsigned long flags;
-
-        spin_lock_irqsave(&sscape->fwlock, flags);
-        --(sscape->midi_usage);
-        spin_unlock_irqrestore(&sscape->fwlock, flags);
+        return 0;
 }
 
 /*
  * Initialse an MPU-401 subdevice for MIDI support on the SoundScape.
  */
-static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq)
+static int __devinit create_mpu401(struct snd_card *card, int devnum,
+                                   unsigned long port, int irq)
 {
         struct soundscape *sscape = get_card_soundscape(card);
         struct snd_rawmidi *rawmidi;
         int err;
 
-        if ((err = snd_mpu401_uart_new(card, devnum,
-                                       MPU401_HW_MPU401,
-                                       port, MPU401_INFO_INTEGRATED,
-                                       irq, IRQF_DISABLED,
-                                       &rawmidi)) == 0) {
-                struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data;
+        err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
+                                  MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
+                                  &rawmidi);
+        if (err == 0) {
+                struct snd_mpu401 *mpu = rawmidi->private_data;
                 mpu->open_input = mpu401_open;
                 mpu->open_output = mpu401_open;
-                mpu->close_input = mpu401_close;
-                mpu->close_output = mpu401_close;
                 mpu->private_data = sscape;
-                sscape->mpu = mpu;
 
                 initialise_mpu401(mpu);
         }
@@ -950,32 +852,34 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
         register struct soundscape *sscape = get_card_soundscape(card);
         struct snd_wss *chip;
         int err;
+        int codec_type = WSS_HW_DETECT;
 
-        if (sscape->type == SSCAPE_VIVO)
-                port += 4;
+        switch (sscape->type) {
+        case MEDIA_FX:
+        case SSCAPE:
+                /*
+                 * There are some freak examples of early Soundscape cards
+                 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
+                 * CS4231 works only in CS4248 compatibility mode on
+                 * these cards so force it.
+                 */
+                if (sscape->ic_type != IC_OPUS)
+                        codec_type = WSS_HW_AD1848;
+                break;
 
-        if (dma1 == dma2)
-                dma2 = -1;
+        case SSCAPE_VIVO:
+                port += 4;
+                break;
+        default:
+                break;
+        }
 
         err = snd_wss_create(card, port, -1, irq, dma1, dma2,
-                             WSS_HW_DETECT, WSS_HWSHARE_DMA1, &chip);
+                             codec_type, WSS_HWSHARE_DMA1, &chip);
         if (!err) {
                 unsigned long flags;
                 struct snd_pcm *pcm;
 
-/*
- * It turns out that the PLAYBACK_ENABLE bit is set
- * by the lowlevel driver ...
- *
-#define AD1845_IFACE_CONFIG  \
-           (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE)
-    snd_wss_mce_up(chip);
-    spin_lock_irqsave(&chip->reg_lock, flags);
-    snd_wss_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG);
-    spin_unlock_irqrestore(&chip->reg_lock, flags);
-    snd_wss_mce_down(chip);
- */
-
                 if (sscape->type != SSCAPE_VIVO) {
                         /*
                          * The input clock frequency on the SoundScape must
@@ -1022,17 +926,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
                         }
                 }
 
-                strcpy(card->driver, "SoundScape");
-                strcpy(card->shortname, pcm->name);
-                snprintf(card->longname, sizeof(card->longname),
-                         "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
-                         pcm->name, chip->port, chip->irq,
-                         chip->dma1, chip->dma2);
-
                 sscape->chip = chip;
         }
 
-        _error:
+_error:
         return err;
 }
 
@@ -1051,21 +948,8 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
         struct resource *wss_res;
         unsigned long flags;
         int err;
-
-        /*
-         * Check that the user didn't pass us garbage data ...
-         */
-        irq_cfg = get_irq_config(irq[dev]);
-        if (irq_cfg == INVALID_IRQ) {
-                snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
-                return -ENXIO;
-        }
-
-        mpu_irq_cfg = get_irq_config(mpu_irq[dev]);
-        if (mpu_irq_cfg == INVALID_IRQ) {
-                printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
-                return -ENXIO;
-        }
+        int val;
+        const char *name;
 
         /*
          * Grab IO ports that we will need to probe so that we
@@ -1098,41 +982,51 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
         }
 
         spin_lock_init(&sscape->lock);
-        spin_lock_init(&sscape->fwlock);
         sscape->io_res = io_res;
         sscape->wss_res = wss_res;
         sscape->io_base = port[dev];
 
         if (!detect_sscape(sscape, wss_port[dev])) {
-                printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base);
+                printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
+                        sscape->io_base);
                 err = -ENODEV;
                 goto _release_dma;
         }
 
-        printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n",
-                         sscape->io_base, irq[dev], dma[dev]);
+        switch (sscape->type) {
+        case MEDIA_FX:
+                name = "MediaFX/SoundFX";
+                break;
+        case SSCAPE:
+                name = "Soundscape";
+                break;
+        case SSCAPE_PNP:
+                name = "Soundscape PnP";
+                break;
+        case SSCAPE_VIVO:
+                name = "Soundscape VIVO";
+                break;
+        default:
+                name = "unknown Soundscape";
+                break;
+        }
 
-        if (sscape->type != SSCAPE_VIVO) {
-                /*
-                 * Now create the hardware-specific device so that we can
-                 * load the microcode into the on-board processor.
-                 * We cannot use the MPU-401 MIDI system until this firmware
-                 * has been loaded into the card.
-                 */
-                err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw));
-                if (err < 0) {
-                        printk(KERN_ERR "sscape: Failed to create "
-                                        "firmware device\n");
-                        goto _release_dma;
-                }
-                strlcpy(sscape->hw->name, "SoundScape M68K",
-                        sizeof(sscape->hw->name));
-                sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0';
-                sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE;
-                sscape->hw->ops.open = sscape_hw_open;
-                sscape->hw->ops.release = sscape_hw_release;
-                sscape->hw->ops.ioctl = sscape_hw_ioctl;
-                sscape->hw->private_data = sscape;
+        printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
+                         name, sscape->io_base, irq[dev], dma[dev]);
+
+        /*
+         * Check that the user didn't pass us garbage data ...
+         */
+        irq_cfg = get_irq_config(sscape->type, irq[dev]);
+        if (irq_cfg == INVALID_IRQ) {
+                snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
+                return -ENXIO;
+        }
+
+        mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
+        if (mpu_irq_cfg == INVALID_IRQ) {
+                snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
+                return -ENXIO;
         }
 
         /*
@@ -1141,9 +1035,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
          */
         spin_lock_irqsave(&sscape->lock, flags);
 
-        activate_ad1845_unsafe(sscape->io_base);
-
-        sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */
         sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
         sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
 
@@ -1151,15 +1042,23 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
          * Enable and configure the DMA channels ...
          */
         sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
-        dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40);
+        dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
         sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
         sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
 
-        sscape_write_unsafe(sscape->io_base,
-                            GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg);
+        mpu_irq_cfg |= mpu_irq_cfg << 2;
+        val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
+        if (joystick[dev])
+                val |= 8;
+        sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
+        sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
         sscape_write_unsafe(sscape->io_base,
                             GA_CDCFG_REG, 0x09 | DMA_8BIT
                             | (dma[dev] << 4) | (irq_cfg << 1));
+        /*
+         * Enable the master IRQ ...
+         */
+        sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
 
         spin_unlock_irqrestore(&sscape->lock, flags);
 
@@ -1170,32 +1069,56 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
         err = create_ad1845(card, wss_port[dev], irq[dev],
                             dma[dev], dma2[dev]);
         if (err < 0) {
-                printk(KERN_ERR "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
-                       wss_port[dev], irq[dev]);
+                snd_printk(KERN_ERR
+                                "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
+                                wss_port[dev], irq[dev]);
                 goto _release_dma;
         }
+        strcpy(card->driver, "SoundScape");
+        strcpy(card->shortname, name);
+        snprintf(card->longname, sizeof(card->longname),
+                 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
+                 name, sscape->chip->port, sscape->chip->irq,
+                 sscape->chip->dma1, sscape->chip->dma2);
+
 #define MIDI_DEVNUM  0
         if (sscape->type != SSCAPE_VIVO) {
-                err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]);
-                if (err < 0) {
-                        printk(KERN_ERR "sscape: Failed to create "
-                                        "MPU-401 device at 0x%lx\n",
-                                        port[dev]);
-                        goto _release_dma;
-                }
+                err = sscape_upload_bootblock(card);
+                if (err >= 0)
+                        err = sscape_upload_microcode(card, err);
 
-                /*
-                 * Enable the master IRQ ...
-                 */
-                sscape_write(sscape, GA_INTENA_REG, 0x80);
+                if (err == 0) {
+                        err = create_mpu401(card, MIDI_DEVNUM, port[dev],
+                                            mpu_irq[dev]);
+                        if (err < 0) {
+                                snd_printk(KERN_ERR "sscape: Failed to create "
+                                                "MPU-401 device at 0x%lx\n",
+                                                port[dev]);
+                                goto _release_dma;
+                        }
 
-                /*
-                 * Initialize mixer
-                 */
-                sscape->midi_vol = 0;
-                host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100);
-                host_write_ctrl_unsafe(sscape->io_base, 0, 100);
-                host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100);
+                        /*
+                         * Initialize mixer
+                         */
+                        spin_lock_irqsave(&sscape->lock, flags);
+                        sscape->midi_vol = 0;
+                        host_write_ctrl_unsafe(sscape->io_base,
+                                                CMD_SET_MIDI_VOL, 100);
+                        host_write_ctrl_unsafe(sscape->io_base,
+                                                sscape->midi_vol, 100);
+                        host_write_ctrl_unsafe(sscape->io_base,
+                                                CMD_XXX_MIDI_VOL, 100);
+                        host_write_ctrl_unsafe(sscape->io_base,
+                                                sscape->midi_vol, 100);
+                        host_write_ctrl_unsafe(sscape->io_base,
+                                                CMD_SET_EXTMIDI, 100);
+                        host_write_ctrl_unsafe(sscape->io_base,
+                                                0, 100);
+                        host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
+
+                        set_midi_mode_unsafe(sscape->io_base);
+                        spin_unlock_irqrestore(&sscape->lock, flags);
+                }
         }
 
         /*
@@ -1231,7 +1154,8 @@ static int __devinit snd_sscape_match(struct device *pdev, unsigned int i)
             mpu_irq[i] == SNDRV_AUTO_IRQ ||
             dma[i] == SNDRV_AUTO_DMA) {
                 printk(KERN_INFO
-                       "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n");
+                       "sscape: insufficient parameters, "
+                       "need IO, IRQ, MPU-IRQ and DMA\n");
                 return 0;
         }
 
@@ -1253,13 +1177,15 @@ static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev)
         sscape->type = SSCAPE;
 
         dma[dev] &= 0x03;
+        snd_card_set_dev(card, pdev);
+
         ret = create_sscape(dev, card);
         if (ret < 0)
                 goto _release_card;
 
-        snd_card_set_dev(card, pdev);
-        if ((ret = snd_card_register(card)) < 0) {
-                printk(KERN_ERR "sscape: Failed to register sound card\n");
+        ret = snd_card_register(card);
+        if (ret < 0) {
+                snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
                 goto _release_card;
         }
         dev_set_drvdata(pdev, card);
@@ -1311,36 +1237,20 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard,
          * Allow this function to fail *quietly* if all the ISA PnP
          * devices were configured using module parameters instead.
          */
-        if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS)
+        idx = get_next_autoindex(idx);
+        if (idx >= SNDRV_CARDS)
                 return -ENOSPC;
 
         /*
-         * We have found a candidate ISA PnP card. Now we
-         * have to check that it has the devices that we
-         * expect it to have.
-         *
-         * We will NOT try and autoconfigure all of the resources
-         * needed and then activate the card as we are assuming that
-         * has already been done at boot-time using /proc/isapnp.
-         * We shall simply try to give each active card the resources
-         * that it wants. This is a sensible strategy for a modular
-         * system where unused modules are unloaded regularly.
-         *
-         * This strategy is utterly useless if we compile the driver
-         * into the kernel, of course.
-         */
-        // printk(KERN_INFO "sscape: %s\n", card->name);
-
-        /*
          * Check that we still have room for another sound card ...
          */
         dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
-        if (! dev)
+        if (!dev)
                 return -ENODEV;
 
         if (!pnp_is_active(dev)) {
                 if (pnp_activate_dev(dev) < 0) {
-                        printk(KERN_INFO "sscape: device is inactive\n");
+                        snd_printk(KERN_INFO "sscape: device is inactive\n");
                         return -EBUSY;
                 }
         }
@@ -1378,14 +1288,15 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard,
                 wss_port[idx] = pnp_port_start(dev, 1);
                 dma2[idx] = pnp_dma(dev, 1);
         }
+        snd_card_set_dev(card, &pcard->card->dev);
 
         ret = create_sscape(idx, card);
         if (ret < 0)
                 goto _release_card;
 
-        snd_card_set_dev(card, &pcard->card->dev);
-        if ((ret = snd_card_register(card)) < 0) {
-                printk(KERN_ERR "sscape: Failed to register sound card\n");
+        ret = snd_card_register(card);
+        if (ret < 0) {
+                snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
                 goto _release_card;
         }