mac80211: move regular interface handling

Move the code to handle regular interfaces out of main.c and
into iface.c, keep only the master interface stuff in main.c.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 534 insertions, 0 deletions

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 004fb23241da..f528962b13e3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1,4 +1,6 @@
 /*
+ * Interface handling (except master interface)
+ *
  * Copyright 2002-2005, Instant802 Networks, Inc.
  * Copyright 2005-2006, Devicescape Software, Inc.
  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
@@ -17,7 +19,539 @@
 #include "sta_info.h"
 #include "debugfs_netdev.h"
 #include "mesh.h"
+#include "led.h"
+
+static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
+{
+        int meshhdrlen;
+        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+        meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
+
+        /* FIX: what would be proper limits for MTU?
+         * This interface uses 802.3 frames. */
+        if (new_mtu < 256 ||
+            new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
+                return -EINVAL;
+        }
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+        printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+        dev->mtu = new_mtu;
+        return 0;
+}
+
+static inline int identical_mac_addr_allowed(int type1, int type2)
+{
+        return type1 == NL80211_IFTYPE_MONITOR ||
+                type2 == NL80211_IFTYPE_MONITOR ||
+                (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
+                (type1 == NL80211_IFTYPE_WDS &&
+                        (type2 == NL80211_IFTYPE_WDS ||
+                         type2 == NL80211_IFTYPE_AP)) ||
+                (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
+                (type1 == NL80211_IFTYPE_AP_VLAN &&
+                        (type2 == NL80211_IFTYPE_AP ||
+                         type2 == NL80211_IFTYPE_AP_VLAN));
+}
+
+static int ieee80211_open(struct net_device *dev)
+{
+        struct ieee80211_sub_if_data *sdata, *nsdata;
+        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+        struct sta_info *sta;
+        struct ieee80211_if_init_conf conf;
+        u32 changed = 0;
+        int res;
+        bool need_hw_reconfig = 0;
+        u8 null_addr[ETH_ALEN] = {0};
+
+        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+        /* fail early if user set an invalid address */
+        if (compare_ether_addr(dev->dev_addr, null_addr) &&
+            !is_valid_ether_addr(dev->dev_addr))
+                return -EADDRNOTAVAIL;
+
+        /* we hold the RTNL here so can safely walk the list */
+        list_for_each_entry(nsdata, &local->interfaces, list) {
+                struct net_device *ndev = nsdata->dev;
+
+                if (ndev != dev && netif_running(ndev)) {
+                        /*
+                         * Allow only a single IBSS interface to be up at any
+                         * time. This is restricted because beacon distribution
+                         * cannot work properly if both are in the same IBSS.
+                         *
+                         * To remove this restriction we'd have to disallow them
+                         * from setting the same SSID on different IBSS interfaces
+                         * belonging to the same hardware. Then, however, we're
+                         * faced with having to adopt two different TSF timers...
+                         */
+                        if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+                            nsdata->vif.type == NL80211_IFTYPE_ADHOC)
+                                return -EBUSY;
+
+                        /*
+                         * The remaining checks are only performed for interfaces
+                         * with the same MAC address.
+                         */
+                        if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
+                                continue;
+
+                        /*
+                         * check whether it may have the same address
+                         */
+                        if (!identical_mac_addr_allowed(sdata->vif.type,
+                                                        nsdata->vif.type))
+                                return -ENOTUNIQ;
+
+                        /*
+                         * can only add VLANs to enabled APs
+                         */
+                        if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
+                            nsdata->vif.type == NL80211_IFTYPE_AP)
+                                sdata->bss = &nsdata->u.ap;
+                }
+        }
+
+        switch (sdata->vif.type) {
+        case NL80211_IFTYPE_WDS:
+                if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
+                        return -ENOLINK;
+                break;
+        case NL80211_IFTYPE_AP_VLAN:
+                if (!sdata->bss)
+                        return -ENOLINK;
+                list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
+                break;
+        case NL80211_IFTYPE_AP:
+                sdata->bss = &sdata->u.ap;
+                break;
+        case NL80211_IFTYPE_MESH_POINT:
+                if (!ieee80211_vif_is_mesh(&sdata->vif))
+                        break;
+                /* mesh ifaces must set allmulti to forward mcast traffic */
+                atomic_inc(&local->iff_allmultis);
+                break;
+        case NL80211_IFTYPE_STATION:
+        case NL80211_IFTYPE_MONITOR:
+        case NL80211_IFTYPE_ADHOC:
+                /* no special treatment */
+                break;
+        case NL80211_IFTYPE_UNSPECIFIED:
+        case __NL80211_IFTYPE_AFTER_LAST:
+                /* cannot happen */
+                WARN_ON(1);
+                break;
+        }
+
+        if (local->open_count == 0) {
+                res = 0;
+                if (local->ops->start)
+                        res = local->ops->start(local_to_hw(local));
+                if (res)
+                        goto err_del_bss;
+                need_hw_reconfig = 1;
+                ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+        }
 
+        /*
+         * Check all interfaces and copy the hopefully now-present
+         * MAC address to those that have the special null one.
+         */
+        list_for_each_entry(nsdata, &local->interfaces, list) {
+                struct net_device *ndev = nsdata->dev;
+
+                /*
+                 * No need to check netif_running since we do not allow
+                 * it to start up with this invalid address.
+                 */
+                if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
+                        memcpy(ndev->dev_addr,
+                               local->hw.wiphy->perm_addr,
+                               ETH_ALEN);
+        }
+
+        if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0)
+                memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr,
+                       ETH_ALEN);
+
+        /*
+         * Validate the MAC address for this device.
+         */
+        if (!is_valid_ether_addr(dev->dev_addr)) {
+                if (!local->open_count && local->ops->stop)
+                        local->ops->stop(local_to_hw(local));
+                return -EADDRNOTAVAIL;
+        }
+
+        switch (sdata->vif.type) {
+        case NL80211_IFTYPE_AP_VLAN:
+                /* no need to tell driver */
+                break;
+        case NL80211_IFTYPE_MONITOR:
+                if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+                        local->cooked_mntrs++;
+                        break;
+                }
+
+                /* must be before the call to ieee80211_configure_filter */
+                local->monitors++;
+                if (local->monitors == 1)
+                        local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
+
+                if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+                        local->fif_fcsfail++;
+                if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
+                        local->fif_plcpfail++;
+                if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+                        local->fif_control++;
+                if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
+                        local->fif_other_bss++;
+
+                netif_addr_lock_bh(local->mdev);
+                ieee80211_configure_filter(local);
+                netif_addr_unlock_bh(local->mdev);
+                break;
+        case NL80211_IFTYPE_STATION:
+        case NL80211_IFTYPE_ADHOC:
+                sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
+                /* fall through */
+        default:
+                conf.vif = &sdata->vif;
+                conf.type = sdata->vif.type;
+                conf.mac_addr = dev->dev_addr;
+                res = local->ops->add_interface(local_to_hw(local), &conf);
+                if (res)
+                        goto err_stop;
+
+                if (ieee80211_vif_is_mesh(&sdata->vif))
+                        ieee80211_start_mesh(sdata);
+                changed |= ieee80211_reset_erp_info(sdata);
+                ieee80211_bss_info_change_notify(sdata, changed);
+                ieee80211_enable_keys(sdata);
+
+                if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+                    !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
+                        netif_carrier_off(dev);
+                else
+                        netif_carrier_on(dev);
+        }
+
+        if (sdata->vif.type == NL80211_IFTYPE_WDS) {
+                /* Create STA entry for the WDS peer */
+                sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+                                     GFP_KERNEL);
+                if (!sta) {
+                        res = -ENOMEM;
+                        goto err_del_interface;
+                }
+
+                /* no locking required since STA is not live yet */
+                sta->flags |= WLAN_STA_AUTHORIZED;
+
+                res = sta_info_insert(sta);
+                if (res) {
+                        /* STA has been freed */
+                        goto err_del_interface;
+                }
+        }
+
+        if (local->open_count == 0) {
+                res = dev_open(local->mdev);
+                WARN_ON(res);
+                if (res)
+                        goto err_del_interface;
+                tasklet_enable(&local->tx_pending_tasklet);
+                tasklet_enable(&local->tasklet);
+        }
+
+        /*
+         * set_multicast_list will be invoked by the networking core
+         * which will check whether any increments here were done in
+         * error and sync them down to the hardware as filter flags.
+         */
+        if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+                atomic_inc(&local->iff_allmultis);
+
+        if (sdata->flags & IEEE80211_SDATA_PROMISC)
+                atomic_inc(&local->iff_promiscs);
+
+        local->open_count++;
+        if (need_hw_reconfig) {
+                ieee80211_hw_config(local);
+                /*
+                 * set default queue parameters so drivers don't
+                 * need to initialise the hardware if the hardware
+                 * doesn't start up with sane defaults
+                 */
+                ieee80211_set_wmm_default(sdata);
+        }
+
+        /*
+         * ieee80211_sta_work is disabled while network interface
+         * is down. Therefore, some configuration changes may not
+         * yet be effective. Trigger execution of ieee80211_sta_work
+         * to fix this.
+         */
+        if (sdata->vif.type == NL80211_IFTYPE_STATION ||
+            sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+                struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+                queue_work(local->hw.workqueue, &ifsta->work);
+        }
+
+        netif_tx_start_all_queues(dev);
+
+        return 0;
+ err_del_interface:
+        local->ops->remove_interface(local_to_hw(local), &conf);
+ err_stop:
+        if (!local->open_count && local->ops->stop)
+                local->ops->stop(local_to_hw(local));
+ err_del_bss:
+        sdata->bss = NULL;
+        if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+                list_del(&sdata->u.vlan.list);
+        return res;
+}
+
+static int ieee80211_stop(struct net_device *dev)
+{
+        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        struct ieee80211_local *local = sdata->local;
+        struct ieee80211_if_init_conf conf;
+        struct sta_info *sta;
+
+        /*
+         * Stop TX on this interface first.
+         */
+        netif_tx_stop_all_queues(dev);
+
+        /*
+         * Now delete all active aggregation sessions.
+         */
+        rcu_read_lock();
+
+        list_for_each_entry_rcu(sta, &local->sta_list, list) {
+                if (sta->sdata == sdata)
+                        ieee80211_sta_tear_down_BA_sessions(sdata, sta->addr);
+        }
+
+        rcu_read_unlock();
+
+        /*
+         * Remove all stations associated with this interface.
+         *
+         * This must be done before calling ops->remove_interface()
+         * because otherwise we can later invoke ops->sta_notify()
+         * whenever the STAs are removed, and that invalidates driver
+         * assumptions about always getting a vif pointer that is valid
+         * (because if we remove a STA after ops->remove_interface()
+         * the driver will have removed the vif info already!)
+         *
+         * We could relax this and only unlink the stations from the
+         * hash table and list but keep them on a per-sdata list that
+         * will be inserted back again when the interface is brought
+         * up again, but I don't currently see a use case for that,
+         * except with WDS which gets a STA entry created when it is
+         * brought up.
+         */
+        sta_info_flush(local, sdata);
+
+        /*
+         * Don't count this interface for promisc/allmulti while it
+         * is down. dev_mc_unsync() will invoke set_multicast_list
+         * on the master interface which will sync these down to the
+         * hardware as filter flags.
+         */
+        if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+                atomic_dec(&local->iff_allmultis);
+
+        if (sdata->flags & IEEE80211_SDATA_PROMISC)
+                atomic_dec(&local->iff_promiscs);
+
+        dev_mc_unsync(local->mdev, dev);
+
+        /* APs need special treatment */
+        if (sdata->vif.type == NL80211_IFTYPE_AP) {
+                struct ieee80211_sub_if_data *vlan, *tmp;
+                struct beacon_data *old_beacon = sdata->u.ap.beacon;
+
+                /* remove beacon */
+                rcu_assign_pointer(sdata->u.ap.beacon, NULL);
+                synchronize_rcu();
+                kfree(old_beacon);
+
+                /* down all dependent devices, that is VLANs */
+                list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
+                                         u.vlan.list)
+                        dev_close(vlan->dev);
+                WARN_ON(!list_empty(&sdata->u.ap.vlans));
+        }
+
+        local->open_count--;
+
+        switch (sdata->vif.type) {
+        case NL80211_IFTYPE_AP_VLAN:
+                list_del(&sdata->u.vlan.list);
+                /* no need to tell driver */
+                break;
+        case NL80211_IFTYPE_MONITOR:
+                if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+                        local->cooked_mntrs--;
+                        break;
+                }
+
+                local->monitors--;
+                if (local->monitors == 0)
+                        local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
+
+                if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+                        local->fif_fcsfail--;
+                if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
+                        local->fif_plcpfail--;
+                if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+                        local->fif_control--;
+                if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
+                        local->fif_other_bss--;
+
+                netif_addr_lock_bh(local->mdev);
+                ieee80211_configure_filter(local);
+                netif_addr_unlock_bh(local->mdev);
+                break;
+        case NL80211_IFTYPE_STATION:
+        case NL80211_IFTYPE_ADHOC:
+                sdata->u.sta.state = IEEE80211_STA_MLME_DISABLED;
+                memset(sdata->u.sta.bssid, 0, ETH_ALEN);
+                del_timer_sync(&sdata->u.sta.timer);
+                /*
+                 * If the timer fired while we waited for it, it will have
+                 * requeued the work. Now the work will be running again
+                 * but will not rearm the timer again because it checks
+                 * whether the interface is running, which, at this point,
+                 * it no longer is.
+                 */
+                cancel_work_sync(&sdata->u.sta.work);
+                /*
+                 * When we get here, the interface is marked down.
+                 * Call synchronize_rcu() to wait for the RX path
+                 * should it be using the interface and enqueuing
+                 * frames at this very time on another CPU.
+                 */
+                synchronize_rcu();
+                skb_queue_purge(&sdata->u.sta.skb_queue);
+
+                sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
+                kfree(sdata->u.sta.extra_ie);
+                sdata->u.sta.extra_ie = NULL;
+                sdata->u.sta.extra_ie_len = 0;
+                /* fall through */
+        case NL80211_IFTYPE_MESH_POINT:
+                if (ieee80211_vif_is_mesh(&sdata->vif)) {
+                        /* allmulti is always set on mesh ifaces */
+                        atomic_dec(&local->iff_allmultis);
+                        ieee80211_stop_mesh(sdata);
+                }
+                /* fall through */
+        default:
+                if (local->scan_sdata == sdata) {
+                        if (!local->ops->hw_scan)
+                                cancel_delayed_work_sync(&local->scan_work);
+                        /*
+                         * The software scan can no longer run now, so we can
+                         * clear out the scan_sdata reference. However, the
+                         * hardware scan may still be running. The complete
+                         * function must be prepared to handle a NULL value.
+                         */
+                        local->scan_sdata = NULL;
+                        /*
+                         * The memory barrier guarantees that another CPU
+                         * that is hardware-scanning will now see the fact
+                         * that this interface is gone.
+                         */
+                        smp_mb();
+                        /*
+                         * If software scanning, complete the scan but since
+                         * the scan_sdata is NULL already don't send out a
+                         * scan event to userspace -- the scan is incomplete.
+                         */
+                        if (local->sw_scanning)
+                                ieee80211_scan_completed(&local->hw);
+                }
+
+                conf.vif = &sdata->vif;
+                conf.type = sdata->vif.type;
+                conf.mac_addr = dev->dev_addr;
+                /* disable all keys for as long as this netdev is down */
+                ieee80211_disable_keys(sdata);
+                local->ops->remove_interface(local_to_hw(local), &conf);
+        }
+
+        sdata->bss = NULL;
+
+        if (local->open_count == 0) {
+                if (netif_running(local->mdev))
+                        dev_close(local->mdev);
+
+                if (local->ops->stop)
+                        local->ops->stop(local_to_hw(local));
+
+                ieee80211_led_radio(local, 0);
+
+                flush_workqueue(local->hw.workqueue);
+
+                tasklet_disable(&local->tx_pending_tasklet);
+                tasklet_disable(&local->tasklet);
+        }
+
+        return 0;
+}
+
+static void ieee80211_set_multicast_list(struct net_device *dev)
+{
+        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+        struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+        int allmulti, promisc, sdata_allmulti, sdata_promisc;
+
+        allmulti = !!(dev->flags & IFF_ALLMULTI);
+        promisc = !!(dev->flags & IFF_PROMISC);
+        sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
+        sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
+
+        if (allmulti != sdata_allmulti) {
+                if (dev->flags & IFF_ALLMULTI)
+                        atomic_inc(&local->iff_allmultis);
+                else
+                        atomic_dec(&local->iff_allmultis);
+                sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
+        }
+
+        if (promisc != sdata_promisc) {
+                if (dev->flags & IFF_PROMISC)
+                        atomic_inc(&local->iff_promiscs);
+                else
+                        atomic_dec(&local->iff_promiscs);
+                sdata->flags ^= IEEE80211_SDATA_PROMISC;
+        }
+
+        dev_mc_sync(local->mdev, dev);
+}
+
+static void ieee80211_if_setup(struct net_device *dev)
+{
+        ether_setup(dev);
+        dev->hard_start_xmit = ieee80211_subif_start_xmit;
+        dev->wireless_handlers = &ieee80211_iw_handler_def;
+        dev->set_multicast_list = ieee80211_set_multicast_list;
+        dev->change_mtu = ieee80211_change_mtu;
+        dev->open = ieee80211_open;
+        dev->stop = ieee80211_stop;
+        dev->destructor = free_netdev;
+        /* we will validate the address ourselves in ->open */
+        dev->validate_addr = NULL;
+}
 /*
  * Called when the netdev is removed or, by the code below, before
  * the interface type changes.