[IPSEC]: Kill post_input hook and do NAT-T in esp_input directly

The only reason post_input exists at all is that it gives us the
potential to adjust the checksums incrementally in future which
we ought to do.

However, after thinking about it for a bit we can adjust the
checksums without using this post_input stuff at all.  The crucial
point is that only the inner-most NAT-T SA needs to be considered
when adjusting checksums.  What's more, the checksum adjustment
comes down to a single u32 due to the linearity of IP checksums.

We just happen to have a spare u32 lying around in our skb structure :)
When ip_summed is set to CHECKSUM_NONE on input, the value of skb->csum
is currently unused.  All we have to do is to make that the checksum
adjustment and voila, there goes all the post_input and decap structures!

I've left in the decap data structures for now since it's intricately
woven into the sec_path stuff.  We can kill them later too.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 38 insertions, 90 deletions

diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 3f47419cb9c5..09590f356086 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -12,13 +12,6 @@
 #include <net/protocol.h>
 #include <net/udp.h>
 
-/* decapsulation data for use when post-processing */
-struct esp_decap_data {
-        xfrm_address_t  saddr;
-        __u16           sport;
-        __u8            proto;
-};
-
 static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
 {
         int err;
@@ -210,25 +203,47 @@ static int esp_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struc
 
         /* ... check padding bits here. Silly. :-) */ 
 
-        if (x->encap && decap && decap->decap_type) {
-                struct esp_decap_data *encap_data;
-                struct udphdr *uh = (struct udphdr *) (iph+1);
-
-                encap_data = (struct esp_decap_data *) (decap->decap_data);
-                encap_data->proto = 0;
-
-                switch (decap->decap_type) {
-                case UDP_ENCAP_ESPINUDP:
-                case UDP_ENCAP_ESPINUDP_NON_IKE:
-                        encap_data->proto = AF_INET;
-                        encap_data->saddr.a4 = iph->saddr;
-                        encap_data->sport = uh->source;
-                        encap_len = (void*)esph - (void*)uh;
-                        break;
+        if (x->encap) {
+                struct xfrm_encap_tmpl *encap = x->encap;
+                struct udphdr *uh;
 
-                default:
+                if (encap->encap_type != decap->decap_type)
                         goto out;
+
+                uh = (struct udphdr *)(iph + 1);
+                encap_len = (void*)esph - (void*)uh;
+
+                /*
+                 * 1) if the NAT-T peer's IP or port changed then
+                 *    advertize the change to the keying daemon.
+                 *    This is an inbound SA, so just compare
+                 *    SRC ports.
+                 */
+                if (iph->saddr != x->props.saddr.a4 ||
+                    uh->source != encap->encap_sport) {
+                        xfrm_address_t ipaddr;
+
+                        ipaddr.a4 = iph->saddr;
+                        km_new_mapping(x, &ipaddr, uh->source);
+                                
+                        /* XXX: perhaps add an extra
+                         * policy check here, to see
+                         * if we should allow or
+                         * reject a packet from a
+                         * different source
+                         * address/port.
+                         */
                 }
+        
+                /*
+                 * 2) ignore UDP/TCP checksums in case
+                 *    of NAT-T in Transport Mode, or
+                 *    perform other post-processing fixes
+                 *    as per draft-ietf-ipsec-udp-encaps-06,
+                 *    section 3.1.2
+                 */
+                if (!x->props.mode)
+                        skb->ip_summed = CHECKSUM_UNNECESSARY;
         }
 
         iph->protocol = nexthdr[1];
@@ -245,63 +260,6 @@ out:
         return -EINVAL;
 }
 
-static int esp_post_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struct sk_buff *skb)
-{
-  
-        if (x->encap) {
-                struct xfrm_encap_tmpl *encap;
-                struct esp_decap_data *decap_data;
-
-                encap = x->encap;
-                decap_data = (struct esp_decap_data *)(decap->decap_data);
-
-                /* first, make sure that the decap type == the encap type */
-                if (encap->encap_type != decap->decap_type)
-                        return -EINVAL;
-
-                switch (encap->encap_type) {
-                default:
-                case UDP_ENCAP_ESPINUDP:
-                case UDP_ENCAP_ESPINUDP_NON_IKE:
-                        /*
-                         * 1) if the NAT-T peer's IP or port changed then
-                         *    advertize the change to the keying daemon.
-                         *    This is an inbound SA, so just compare
-                         *    SRC ports.
-                         */
-                        if (decap_data->proto == AF_INET &&
-                            (decap_data->saddr.a4 != x->props.saddr.a4 ||
-                             decap_data->sport != encap->encap_sport)) {
-                                xfrm_address_t ipaddr;
-
-                                ipaddr.a4 = decap_data->saddr.a4;
-                                km_new_mapping(x, &ipaddr, decap_data->sport);
-                                        
-                                /* XXX: perhaps add an extra
-                                 * policy check here, to see
-                                 * if we should allow or
-                                 * reject a packet from a
-                                 * different source
-                                 * address/port.
-                                 */
-                        }
-                
-                        /*
-                         * 2) ignore UDP/TCP checksums in case
-                         *    of NAT-T in Transport Mode, or
-                         *    perform other post-processing fixes
-                         *    as per * draft-ietf-ipsec-udp-encaps-06,
-                         *    section 3.1.2
-                         */
-                        if (!x->props.mode)
-                                skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-                        break;
-                }
-        }
-        return 0;
-}
-
 static u32 esp4_get_max_size(struct xfrm_state *x, int mtu)
 {
         struct esp_data *esp = x->data;
@@ -457,7 +415,6 @@ static struct xfrm_type esp_type =
         .destructor     = esp_destroy,
         .get_max_size   = esp4_get_max_size,
         .input          = esp_input,
-        .post_input     = esp_post_input,
         .output         = esp_output
 };
 
@@ -469,15 +426,6 @@ static struct net_protocol esp4_protocol = {
 
 static int __init esp4_init(void)
 {
-        struct xfrm_decap_state decap;
-
-        if (sizeof(struct esp_decap_data)  >
-            sizeof(decap.decap_data)) {
-                extern void decap_data_too_small(void);
-
-                decap_data_too_small();
-        }
-
         if (xfrm_register_type(&esp_type, AF_INET) < 0) {
                 printk(KERN_INFO "ip esp init: can't add xfrm type\n");
                 return -EAGAIN;