Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 110 insertions, 0 deletions

diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
new file mode 100644
index 000000000000..a8993a041724
--- /dev/null
+++ b/net/ax25/Kconfig
@@ -0,0 +1,110 @@
+#
+# Amateur Radio protocols and AX.25 device configuration
+#
+# 19971130      Now in an own category to make correct compilation of the
+#               AX.25 stuff easier...
+#               Joerg Reuter DL1BKE <jreuter@yaina.de>
+# 19980129      Moved to net/ax25/Config.in, sourcing device drivers.
+
+menuconfig HAMRADIO
+        depends on NET
+        bool "Amateur Radio support"
+        help
+          If you want to connect your Linux box to an amateur radio, answer Y
+          here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+          the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+          Note that the answer to this question won't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about amateur radio.
+
+comment "Packet Radio protocols"
+        depends on HAMRADIO && NET
+
+config AX25
+        tristate "Amateur Radio AX.25 Level 2 protocol"
+        depends on HAMRADIO && NET
+        ---help---
+          This is the protocol used for computer communication over amateur
+          radio. It is either used by itself for point-to-point links, or to
+          carry other protocols such as tcp/ip. To use it, you need a device
+          that connects your Linux box to your amateur radio. You can either
+          use a low speed TNC (a Terminal Node Controller acts as a kind of
+          modem connecting your computer's serial port to your radio's
+          microphone input and speaker output) supporting the KISS protocol or
+          one of the various SCC cards that are supported by the generic Z8530
+          or the DMA SCC driver. Another option are the Baycom modem serial
+          and parallel port hacks or the sound card modem (supported by their
+          own drivers). If you say Y here, you also have to say Y to one of
+          those drivers.
+
+          Information about where to get supporting software for Linux amateur
+          radio as well as information about how to configure an AX.25 port is
+          contained in the AX25-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>. You might also want to
+          check out the file <file:Documentation/networking/ax25.txt> in the
+          kernel source. More information about digital amateur radio in
+          general is on the WWW at
+          <http://www.tapr.org/tapr/html/pkthome.html>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ax25.
+
+config AX25_DAMA_SLAVE
+        bool "AX.25 DAMA Slave support"
+        depends on AX25
+        help
+          DAMA is a mechanism to prevent collisions when doing AX.25
+          networking. A DAMA server (called "master") accepts incoming traffic
+          from clients (called "slaves") and redistributes it to other slaves.
+          If you say Y here, your Linux box will act as a DAMA slave; this is
+          transparent in that you don't have to do any special DAMA
+          configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+          say N.
+
+#        bool '    AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
+config NETROM
+        tristate "Amateur Radio NET/ROM protocol"
+        depends on AX25
+        ---help---
+          NET/ROM is a network layer protocol on top of AX.25 useful for
+          routing.
+
+          A comprehensive listing of all the software for Linux amateur radio
+          users as well as information about how to configure an AX.25 port is
+          contained in the AX25-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>. You also might want to
+          check out the file <file:Documentation/networking/ax25.txt>. More
+          information about digital amateur radio in general is on the WWW at
+          <http://www.tapr.org/tapr/html/pkthome.html>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called netrom.
+
+config ROSE
+        tristate "Amateur Radio X.25 PLP (Rose)"
+        depends on AX25
+        ---help---
+          The Packet Layer Protocol (PLP) is a way to route packets over X.25
+          connections in general and amateur radio AX.25 connections in
+          particular, essentially an alternative to NET/ROM.
+
+          A comprehensive listing of all the software for Linux amateur radio
+          users as well as information about how to configure an AX.25 port is
+          contained in the AX25-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.  You also might want to
+          check out the file <file:Documentation/networking/ax25.txt>. More
+          information about digital amateur radio in general is on the WWW at
+          <http://www.tapr.org/tapr/html/pkthome.html>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called rose.
+
+
+menu "AX.25 network device drivers"
+        depends on HAMRADIO && NET && AX25!=n
+
+source "drivers/net/hamradio/Kconfig"
+
+endmenu
+