timecompare: generic infrastructure to map between two time bases

Mapping from a struct timecounter to a time returned by functions like
ktime_get_real() is implemented. This is sufficient to use this code
in a network device driver which wants to support hardware time
stamping and transformation of hardware time stamps to system time.

The interface could have been made more versatile by not depending on
a time counter, but this wasn't done to avoid writing glue code
elsewhere.

The method implemented here is the one used and analyzed under the name
"assisted PTP" in the LCI PTP paper:
http://www.linuxclustersinstitute.org/conferences/archive/2008/PDF/Ohly_92221.pdf

Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 192 insertions, 1 deletions

diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index 905b0b50792d..0b0a6366c9d4 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -1,4 +1,4 @@
-obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o
+obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD)         += clockevents.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS)               += tick-common.o
diff --git a/kernel/time/timecompare.c b/kernel/time/timecompare.c
new file mode 100644
index 000000000000..71e7f1a19156
--- /dev/null
+++ b/kernel/time/timecompare.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/timecompare.h>
+#include <linux/module.h>
+#include <linux/math64.h>
+
+/*
+ * fixed point arithmetic scale factor for skew
+ *
+ * Usually one would measure skew in ppb (parts per billion, 1e9), but
+ * using a factor of 2 simplifies the math.
+ */
+#define TIMECOMPARE_SKEW_RESOLUTION (((s64)1)<<30)
+
+ktime_t timecompare_transform(struct timecompare *sync,
+                              u64 source_tstamp)
+{
+        u64 nsec;
+
+        nsec = source_tstamp + sync->offset;
+        nsec += (s64)(source_tstamp - sync->last_update) * sync->skew /
+                TIMECOMPARE_SKEW_RESOLUTION;
+
+        return ns_to_ktime(nsec);
+}
+EXPORT_SYMBOL(timecompare_transform);
+
+int timecompare_offset(struct timecompare *sync,
+                       s64 *offset,
+                       u64 *source_tstamp)
+{
+        u64 start_source = 0, end_source = 0;
+        struct {
+                s64 offset;
+                s64 duration_target;
+        } buffer[10], sample, *samples;
+        int counter = 0, i;
+        int used;
+        int index;
+        int num_samples = sync->num_samples;
+
+        if (num_samples > sizeof(buffer)/sizeof(buffer[0])) {
+                samples = kmalloc(sizeof(*samples) * num_samples, GFP_ATOMIC);
+                if (!samples) {
+                        samples = buffer;
+                        num_samples = sizeof(buffer)/sizeof(buffer[0]);
+                }
+        } else {
+                samples = buffer;
+        }
+
+        /* run until we have enough valid samples, but do not try forever */
+        i = 0;
+        counter = 0;
+        while (1) {
+                u64 ts;
+                ktime_t start, end;
+
+                start = sync->target();
+                ts = timecounter_read(sync->source);
+                end = sync->target();
+
+                if (!i)
+                        start_source = ts;
+
+                /* ignore negative durations */
+                sample.duration_target = ktime_to_ns(ktime_sub(end, start));
+                if (sample.duration_target >= 0) {
+                        /*
+                         * assume symetric delay to and from source:
+                         * average target time corresponds to measured
+                         * source time
+                         */
+                        sample.offset =
+                                ktime_to_ns(ktime_add(end, start)) / 2 -
+                                ts;
+
+                        /* simple insertion sort based on duration */
+                        index = counter - 1;
+                        while (index >= 0) {
+                                if (samples[index].duration_target <
+                                    sample.duration_target)
+                                        break;
+                                samples[index + 1] = samples[index];
+                                index--;
+                        }
+                        samples[index + 1] = sample;
+                        counter++;
+                }
+
+                i++;
+                if (counter >= num_samples || i >= 100000) {
+                        end_source = ts;
+                        break;
+                }
+        }
+
+        *source_tstamp = (end_source + start_source) / 2;
+
+        /* remove outliers by only using 75% of the samples */
+        used = counter * 3 / 4;
+        if (!used)
+                used = counter;
+        if (used) {
+                /* calculate average */
+                s64 off = 0;
+                for (index = 0; index < used; index++)
+                        off += samples[index].offset;
+                *offset = div_s64(off, used);
+        }
+
+        if (samples && samples != buffer)
+                kfree(samples);
+
+        return used;
+}
+EXPORT_SYMBOL(timecompare_offset);
+
+void __timecompare_update(struct timecompare *sync,
+                          u64 source_tstamp)
+{
+        s64 offset;
+        u64 average_time;
+
+        if (!timecompare_offset(sync, &offset, &average_time))
+                return;
+
+        if (!sync->last_update) {
+                sync->last_update = average_time;
+                sync->offset = offset;
+                sync->skew = 0;
+        } else {
+                s64 delta_nsec = average_time - sync->last_update;
+
+                /* avoid division by negative or small deltas */
+                if (delta_nsec >= 10000) {
+                        s64 delta_offset_nsec = offset - sync->offset;
+                        s64 skew; /* delta_offset_nsec *
+                                     TIMECOMPARE_SKEW_RESOLUTION /
+                                     delta_nsec */
+                        u64 divisor;
+
+                        /* div_s64() is limited to 32 bit divisor */
+                        skew = delta_offset_nsec * TIMECOMPARE_SKEW_RESOLUTION;
+                        divisor = delta_nsec;
+                        while (unlikely(divisor >= ((s64)1) << 32)) {
+                                /* divide both by 2; beware, right shift
+                                   of negative value has undefined
+                                   behavior and can only be used for
+                                   the positive divisor */
+                                skew = div_s64(skew, 2);
+                                divisor >>= 1;
+                        }
+                        skew = div_s64(skew, divisor);
+
+                        /*
+                         * Calculate new overall skew as 4/16 the
+                         * old value and 12/16 the new one. This is
+                         * a rather arbitrary tradeoff between
+                         * only using the latest measurement (0/16 and
+                         * 16/16) and even more weight on past measurements.
+                         */
+#define TIMECOMPARE_NEW_SKEW_PER_16 12
+                        sync->skew =
+                                div_s64((16 - TIMECOMPARE_NEW_SKEW_PER_16) *
+                                        sync->skew +
+                                        TIMECOMPARE_NEW_SKEW_PER_16 * skew,
+                                        16);
+                        sync->last_update = average_time;
+                        sync->offset = offset;
+                }
+        }
+}
+EXPORT_SYMBOL(__timecompare_update);