PM: Separate suspend to RAM functionality from core

Move the suspend to RAM and standby code from kernel/power/main.c
to two separate files, kernel/power/suspend.c containing the basic
functions and kernel/power/suspend_test.c containing the automatic
suspend test facility based on the RTC clock alarm.

There are no changes in functionality related to these modifications.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>

1 files changed, 0 insertions, 503 deletions

diff --git a/kernel/power/main.c b/kernel/power/main.c
index 2a19f347bd8a..f710e36930cc 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -8,20 +8,9 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/suspend.h>
 #include <linux/kobject.h>
 #include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/cpu.h>
 #include <linux/resume-trace.h>
-#include <linux/freezer.h>
-#include <linux/vmstat.h>
-#include <linux/syscalls.h>
 
 #include "power.h"
 
@@ -119,355 +108,6 @@ power_attr(pm_test);
 
 #endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_SUSPEND
-
-static int suspend_test(int level)
-{
-#ifdef CONFIG_PM_DEBUG
-        if (pm_test_level == level) {
-                printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
-                mdelay(5000);
-                return 1;
-        }
-#endif /* !CONFIG_PM_DEBUG */
-        return 0;
-}
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-/*
- * We test the system suspend code by setting an RTC wakealarm a short
- * time in the future, then suspending.  Suspending the devices won't
- * normally take long ... some systems only need a few milliseconds.
- *
- * The time it takes is system-specific though, so when we test this
- * during system bootup we allow a LOT of time.
- */
-#define TEST_SUSPEND_SECONDS    5
-
-static unsigned long suspend_test_start_time;
-
-static void suspend_test_start(void)
-{
-        /* FIXME Use better timebase than "jiffies", ideally a clocksource.
-         * What we want is a hardware counter that will work correctly even
-         * during the irqs-are-off stages of the suspend/resume cycle...
-         */
-        suspend_test_start_time = jiffies;
-}
-
-static void suspend_test_finish(const char *label)
-{
-        long nj = jiffies - suspend_test_start_time;
-        unsigned msec;
-
-        msec = jiffies_to_msecs(abs(nj));
-        pr_info("PM: %s took %d.%03d seconds\n", label,
-                        msec / 1000, msec % 1000);
-
-        /* Warning on suspend means the RTC alarm period needs to be
-         * larger -- the system was sooo slooowwww to suspend that the
-         * alarm (should have) fired before the system went to sleep!
-         *
-         * Warning on either suspend or resume also means the system
-         * has some performance issues.  The stack dump of a WARN_ON
-         * is more likely to get the right attention than a printk...
-         */
-        WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
-}
-
-#else
-
-static void suspend_test_start(void)
-{
-}
-
-static void suspend_test_finish(const char *label)
-{
-}
-
-#endif
-
-static struct platform_suspend_ops *suspend_ops;
-
-/**
- *      suspend_set_ops - Set the global suspend method table.
- *      @ops:   Pointer to ops structure.
- */
-
-void suspend_set_ops(struct platform_suspend_ops *ops)
-{
-        mutex_lock(&pm_mutex);
-        suspend_ops = ops;
-        mutex_unlock(&pm_mutex);
-}
-
-/**
- * suspend_valid_only_mem - generic memory-only valid callback
- *
- * Platform drivers that implement mem suspend only and only need
- * to check for that in their .valid callback can use this instead
- * of rolling their own .valid callback.
- */
-int suspend_valid_only_mem(suspend_state_t state)
-{
-        return state == PM_SUSPEND_MEM;
-}
-
-/**
- *      suspend_prepare - Do prep work before entering low-power state.
- *
- *      This is common code that is called for each state that we're entering.
- *      Run suspend notifiers, allocate a console and stop all processes.
- */
-static int suspend_prepare(void)
-{
-        int error;
-
-        if (!suspend_ops || !suspend_ops->enter)
-                return -EPERM;
-
-        pm_prepare_console();
-
-        error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
-        if (error)
-                goto Finish;
-
-        error = usermodehelper_disable();
-        if (error)
-                goto Finish;
-
-        error = suspend_freeze_processes();
-        if (!error)
-                return 0;
-
-        suspend_thaw_processes();
-        usermodehelper_enable();
- Finish:
-        pm_notifier_call_chain(PM_POST_SUSPEND);
-        pm_restore_console();
-        return error;
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
-{
-        local_irq_disable();
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
-{
-        local_irq_enable();
-}
-
-/**
- *      suspend_enter - enter the desired system sleep state.
- *      @state:         state to enter
- *
- *      This function should be called after devices have been suspended.
- */
-static int suspend_enter(suspend_state_t state)
-{
-        int error;
-
-        if (suspend_ops->prepare) {
-                error = suspend_ops->prepare();
-                if (error)
-                        return error;
-        }
-
-        error = dpm_suspend_noirq(PMSG_SUSPEND);
-        if (error) {
-                printk(KERN_ERR "PM: Some devices failed to power down\n");
-                goto Platfrom_finish;
-        }
-
-        if (suspend_ops->prepare_late) {
-                error = suspend_ops->prepare_late();
-                if (error)
-                        goto Power_up_devices;
-        }
-
-        if (suspend_test(TEST_PLATFORM))
-                goto Platform_wake;
-
-        error = disable_nonboot_cpus();
-        if (error || suspend_test(TEST_CPUS))
-                goto Enable_cpus;
-
-        arch_suspend_disable_irqs();
-        BUG_ON(!irqs_disabled());
-
-        error = sysdev_suspend(PMSG_SUSPEND);
-        if (!error) {
-                if (!suspend_test(TEST_CORE))
-                        error = suspend_ops->enter(state);
-                sysdev_resume();
-        }
-
-        arch_suspend_enable_irqs();
-        BUG_ON(irqs_disabled());
-
- Enable_cpus:
-        enable_nonboot_cpus();
-
- Platform_wake:
-        if (suspend_ops->wake)
-                suspend_ops->wake();
-
- Power_up_devices:
-        dpm_resume_noirq(PMSG_RESUME);
-
- Platfrom_finish:
-        if (suspend_ops->finish)
-                suspend_ops->finish();
-
-        return error;
-}
-
-/**
- *      suspend_devices_and_enter - suspend devices and enter the desired system
- *                                  sleep state.
- *      @state:           state to enter
- */
-int suspend_devices_and_enter(suspend_state_t state)
-{
-        int error;
-
-        if (!suspend_ops)
-                return -ENOSYS;
-
-        if (suspend_ops->begin) {
-                error = suspend_ops->begin(state);
-                if (error)
-                        goto Close;
-        }
-        suspend_console();
-        suspend_test_start();
-        error = dpm_suspend_start(PMSG_SUSPEND);
-        if (error) {
-                printk(KERN_ERR "PM: Some devices failed to suspend\n");
-                goto Recover_platform;
-        }
-        suspend_test_finish("suspend devices");
-        if (suspend_test(TEST_DEVICES))
-                goto Recover_platform;
-
-        suspend_enter(state);
-
- Resume_devices:
-        suspend_test_start();
-        dpm_resume_end(PMSG_RESUME);
-        suspend_test_finish("resume devices");
-        resume_console();
- Close:
-        if (suspend_ops->end)
-                suspend_ops->end();
-        return error;
-
- Recover_platform:
-        if (suspend_ops->recover)
-                suspend_ops->recover();
-        goto Resume_devices;
-}
-
-/**
- *      suspend_finish - Do final work before exiting suspend sequence.
- *
- *      Call platform code to clean up, restart processes, and free the 
- *      console that we've allocated. This is not called for suspend-to-disk.
- */
-static void suspend_finish(void)
-{
-        suspend_thaw_processes();
-        usermodehelper_enable();
-        pm_notifier_call_chain(PM_POST_SUSPEND);
-        pm_restore_console();
-}
-
-
-
-
-static const char * const pm_states[PM_SUSPEND_MAX] = {
-        [PM_SUSPEND_STANDBY]    = "standby",
-        [PM_SUSPEND_MEM]        = "mem",
-};
-
-static inline int valid_state(suspend_state_t state)
-{
-        /* All states need lowlevel support and need to be valid
-         * to the lowlevel implementation, no valid callback
-         * implies that none are valid. */
-        if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state))
-                return 0;
-        return 1;
-}
-
-
-/**
- *      enter_state - Do common work of entering low-power state.
- *      @state:         pm_state structure for state we're entering.
- *
- *      Make sure we're the only ones trying to enter a sleep state. Fail
- *      if someone has beat us to it, since we don't want anything weird to
- *      happen when we wake up.
- *      Then, do the setup for suspend, enter the state, and cleaup (after
- *      we've woken up).
- */
-static int enter_state(suspend_state_t state)
-{
-        int error;
-
-        if (!valid_state(state))
-                return -ENODEV;
-
-        if (!mutex_trylock(&pm_mutex))
-                return -EBUSY;
-
-        printk(KERN_INFO "PM: Syncing filesystems ... ");
-        sys_sync();
-        printk("done.\n");
-
-        pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
-        error = suspend_prepare();
-        if (error)
-                goto Unlock;
-
-        if (suspend_test(TEST_FREEZER))
-                goto Finish;
-
-        pr_debug("PM: Entering %s sleep\n", pm_states[state]);
-        error = suspend_devices_and_enter(state);
-
- Finish:
-        pr_debug("PM: Finishing wakeup.\n");
-        suspend_finish();
- Unlock:
-        mutex_unlock(&pm_mutex);
-        return error;
-}
-
-
-/**
- *      pm_suspend - Externally visible function for suspending system.
- *      @state:         Enumerated value of state to enter.
- *
- *      Determine whether or not value is within range, get state 
- *      structure, and enter (above).
- */
-
-int pm_suspend(suspend_state_t state)
-{
-        if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
-                return enter_state(state);
-        return -EINVAL;
-}
-
-EXPORT_SYMBOL(pm_suspend);
-
-#endif /* CONFIG_SUSPEND */
-
 struct kobject *power_kobj;
 
 /**
@@ -480,7 +120,6 @@ struct kobject *power_kobj;
  *      store() accepts one of those strings, translates it into the 
  *      proper enumerated value, and initiates a suspend transition.
  */
-
 static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr,
                           char *buf)
 {
@@ -578,7 +217,6 @@ static struct attribute_group attr_group = {
         .attrs = g,
 };
 
-
 static int __init pm_init(void)
 {
         power_kobj = kobject_create_and_add("power", NULL);
@@ -588,144 +226,3 @@ static int __init pm_init(void)
 }
 
 core_initcall(pm_init);
-
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-#include <linux/rtc.h>
-
-/*
- * To test system suspend, we need a hands-off mechanism to resume the
- * system.  RTCs wake alarms are a common self-contained mechanism.
- */
-
-static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
-{
-        static char err_readtime[] __initdata =
-                KERN_ERR "PM: can't read %s time, err %d\n";
-        static char err_wakealarm [] __initdata =
-                KERN_ERR "PM: can't set %s wakealarm, err %d\n";
-        static char err_suspend[] __initdata =
-                KERN_ERR "PM: suspend test failed, error %d\n";
-        static char info_test[] __initdata =
-                KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
-
-        unsigned long           now;
-        struct rtc_wkalrm       alm;
-        int                     status;
-
-        /* this may fail if the RTC hasn't been initialized */
-        status = rtc_read_time(rtc, &alm.time);
-        if (status < 0) {
-                printk(err_readtime, dev_name(&rtc->dev), status);
-                return;
-        }
-        rtc_tm_to_time(&alm.time, &now);
-
-        memset(&alm, 0, sizeof alm);
-        rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
-        alm.enabled = true;
-
-        status = rtc_set_alarm(rtc, &alm);
-        if (status < 0) {
-                printk(err_wakealarm, dev_name(&rtc->dev), status);
-                return;
-        }
-
-        if (state == PM_SUSPEND_MEM) {
-                printk(info_test, pm_states[state]);
-                status = pm_suspend(state);
-                if (status == -ENODEV)
-                        state = PM_SUSPEND_STANDBY;
-        }
-        if (state == PM_SUSPEND_STANDBY) {
-                printk(info_test, pm_states[state]);
-                status = pm_suspend(state);
-        }
-        if (status < 0)
-                printk(err_suspend, status);
-
-        /* Some platforms can't detect that the alarm triggered the
-         * wakeup, or (accordingly) disable it after it afterwards.
-         * It's supposed to give oneshot behavior; cope.
-         */
-        alm.enabled = false;
-        rtc_set_alarm(rtc, &alm);
-}
-
-static int __init has_wakealarm(struct device *dev, void *name_ptr)
-{
-        struct rtc_device *candidate = to_rtc_device(dev);
-
-        if (!candidate->ops->set_alarm)
-                return 0;
-        if (!device_may_wakeup(candidate->dev.parent))
-                return 0;
-
-        *(const char **)name_ptr = dev_name(dev);
-        return 1;
-}
-
-/*
- * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
- * at startup time.  They're normally disabled, for faster boot and because
- * we can't know which states really work on this particular system.
- */
-static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
-
-static char warn_bad_state[] __initdata =
-        KERN_WARNING "PM: can't test '%s' suspend state\n";
-
-static int __init setup_test_suspend(char *value)
-{
-        unsigned i;
-
-        /* "=mem" ==> "mem" */
-        value++;
-        for (i = 0; i < PM_SUSPEND_MAX; i++) {
-                if (!pm_states[i])
-                        continue;
-                if (strcmp(pm_states[i], value) != 0)
-                        continue;
-                test_state = (__force suspend_state_t) i;
-                return 0;
-        }
-        printk(warn_bad_state, value);
-        return 0;
-}
-__setup("test_suspend", setup_test_suspend);
-
-static int __init test_suspend(void)
-{
-        static char             warn_no_rtc[] __initdata =
-                KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
-
-        char                    *pony = NULL;
-        struct rtc_device       *rtc = NULL;
-
-        /* PM is initialized by now; is that state testable? */
-        if (test_state == PM_SUSPEND_ON)
-                goto done;
-        if (!valid_state(test_state)) {
-                printk(warn_bad_state, pm_states[test_state]);
-                goto done;
-        }
-
-        /* RTCs have initialized by now too ... can we use one? */
-        class_find_device(rtc_class, NULL, &pony, has_wakealarm);
-        if (pony)
-                rtc = rtc_class_open(pony);
-        if (!rtc) {
-                printk(warn_no_rtc);
-                goto done;
-        }
-
-        /* go for it */
-        test_wakealarm(rtc, test_state);
-        rtc_class_close(rtc);
-done:
-        return 0;
-}
-late_initcall(test_suspend);
-
-#endif /* CONFIG_PM_TEST_SUSPEND */