Hibernation: Check if ACPI is enabled during restore in the right place

The following scenario leads to total confusion of the platform firmware on
some boxes (eg. HPC nx6325):
* Hibernate with ACPI enabled
* Resume passing "acpi=off" to the boot kernel

To prevent this from happening it's necessary to check if ACPI is enabled (and
enable it if that's not the case) _right_ _after_ control has been transfered
from the boot kernel to the image kernel, before device_power_up() is called
(ie.  with interrupts disabled).   Enabling ACPI after calling
device_power_up() turns out to be insufficient.

For this reason, introduce new hibernation callback ->leave() that will be
executed before device_power_up() by the restored image kernel.   To make it
work, it also is necessary to move swsusp_suspend() from swsusp.c to disk.c
(it's name is changed to "create_image", which is more up to the point).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 57 insertions, 1 deletions

diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 555c0f0b2f7e..e50f4da18fd5 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -93,6 +93,17 @@ static int platform_pre_snapshot(int platform_mode)
 }
 
 /**
+ *      platform_leave - prepare the machine for switching to the normal mode
+ *      of operation using the platform driver (called with interrupts disabled)
+ */
+
+static void platform_leave(int platform_mode)
+{
+        if (platform_mode && hibernation_ops)
+                hibernation_ops->leave();
+}
+
+/**
  *      platform_finish - switch the machine to the normal mode of operation
  *      using the platform driver (must be called after platform_prepare())
  */
@@ -129,6 +140,51 @@ static void platform_restore_cleanup(int platform_mode)
 }
 
 /**
+ *      create_image - freeze devices that need to be frozen with interrupts
+ *      off, create the hibernation image and thaw those devices.  Control
+ *      reappears in this routine after a restore.
+ */
+
+int create_image(int platform_mode)
+{
+        int error;
+
+        error = arch_prepare_suspend();
+        if (error)
+                return error;
+
+        local_irq_disable();
+        /* At this point, device_suspend() has been called, but *not*
+         * device_power_down(). We *must* call device_power_down() now.
+         * Otherwise, drivers for some devices (e.g. interrupt controllers)
+         * become desynchronized with the actual state of the hardware
+         * at resume time, and evil weirdness ensues.
+         */
+        error = device_power_down(PMSG_FREEZE);
+        if (error) {
+                printk(KERN_ERR "Some devices failed to power down, "
+                        KERN_ERR "aborting suspend\n");
+                goto Enable_irqs;
+        }
+
+        save_processor_state();
+        error = swsusp_arch_suspend();
+        if (error)
+                printk(KERN_ERR "Error %d while creating the image\n", error);
+        /* Restore control flow magically appears here */
+        restore_processor_state();
+        if (!in_suspend)
+                platform_leave(platform_mode);
+        /* NOTE:  device_power_up() is just a resume() for devices
+         * that suspended with irqs off ... no overall powerup.
+         */
+        device_power_up();
+ Enable_irqs:
+        local_irq_enable();
+        return error;
+}
+
+/**
  *      hibernation_snapshot - quiesce devices and create the hibernation
  *      snapshot image.
  *      @platform_mode - if set, use the platform driver, if available, to
@@ -163,7 +219,7 @@ int hibernation_snapshot(int platform_mode)
         if (!error) {
                 if (hibernation_mode != HIBERNATION_TEST) {
                         in_suspend = 1;
-                        error = swsusp_suspend();
+                        error = create_image(platform_mode);
                         /* Control returns here after successful restore */
                 } else {
                         printk("swsusp debug: Waiting for 5 seconds.\n");