aboutsummaryrefslogtreecommitdiffstats
path: root/init/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /init/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'init/Kconfig')
-rw-r--r--init/Kconfig463
1 files changed, 463 insertions, 0 deletions
diff --git a/init/Kconfig b/init/Kconfig
new file mode 100644
index 000000000000..abe2682a6ca6
--- /dev/null
+++ b/init/Kconfig
@@ -0,0 +1,463 @@
1menu "Code maturity level options"
2
3config EXPERIMENTAL
4 bool "Prompt for development and/or incomplete code/drivers"
5 ---help---
6 Some of the various things that Linux supports (such as network
7 drivers, file systems, network protocols, etc.) can be in a state
8 of development where the functionality, stability, or the level of
9 testing is not yet high enough for general use. This is usually
10 known as the "alpha-test" phase among developers. If a feature is
11 currently in alpha-test, then the developers usually discourage
12 uninformed widespread use of this feature by the general public to
13 avoid "Why doesn't this work?" type mail messages. However, active
14 testing and use of these systems is welcomed. Just be aware that it
15 may not meet the normal level of reliability or it may fail to work
16 in some special cases. Detailed bug reports from people familiar
17 with the kernel internals are usually welcomed by the developers
18 (before submitting bug reports, please read the documents
19 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
20 <file:Documentation/BUG-HUNTING>, and
21 <file:Documentation/oops-tracing.txt> in the kernel source).
22
23 This option will also make obsoleted drivers available. These are
24 drivers that have been replaced by something else, and/or are
25 scheduled to be removed in a future kernel release.
26
27 Unless you intend to help test and develop a feature or driver that
28 falls into this category, or you have a situation that requires
29 using these features, you should probably say N here, which will
30 cause the configurator to present you with fewer choices. If
31 you say Y here, you will be offered the choice of using features or
32 drivers that are currently considered to be in the alpha-test phase.
33
34config CLEAN_COMPILE
35 bool "Select only drivers expected to compile cleanly" if EXPERIMENTAL
36 default y
37 help
38 Select this option if you don't even want to see the option
39 to configure known-broken drivers.
40
41 If unsure, say Y
42
43config BROKEN
44 bool
45 depends on !CLEAN_COMPILE
46 default y
47
48config BROKEN_ON_SMP
49 bool
50 depends on BROKEN || !SMP
51 default y
52
53config LOCK_KERNEL
54 bool
55 depends on SMP || PREEMPT
56 default y
57
58config INIT_ENV_ARG_LIMIT
59 int
60 default 32 if !USERMODE
61 default 128 if USERMODE
62 help
63 This is the value of the two limits on the number of argument and of
64 env.var passed to init from the kernel command line.
65
66endmenu
67
68menu "General setup"
69
70config LOCALVERSION
71 string "Local version - append to kernel release"
72 help
73 Append an extra string to the end of your kernel version.
74 This will show up when you type uname, for example.
75 The string you set here will be appended after the contents of
76 any files with a filename matching localversion* in your
77 object and source tree, in that order. Your total string can
78 be a maximum of 64 characters.
79
80config SWAP
81 bool "Support for paging of anonymous memory (swap)"
82 depends on MMU
83 default y
84 help
85 This option allows you to choose whether you want to have support
86 for socalled swap devices or swap files in your kernel that are
87 used to provide more virtual memory than the actual RAM present
88 in your computer. If unsure say Y.
89
90config SYSVIPC
91 bool "System V IPC"
92 depends on MMU
93 ---help---
94 Inter Process Communication is a suite of library functions and
95 system calls which let processes (running programs) synchronize and
96 exchange information. It is generally considered to be a good thing,
97 and some programs won't run unless you say Y here. In particular, if
98 you want to run the DOS emulator dosemu under Linux (read the
99 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
100 you'll need to say Y here.
101
102 You can find documentation about IPC with "info ipc" and also in
103 section 6.4 of the Linux Programmer's Guide, available from
104 <http://www.tldp.org/guides.html>.
105
106config POSIX_MQUEUE
107 bool "POSIX Message Queues"
108 depends on NET && EXPERIMENTAL
109 ---help---
110 POSIX variant of message queues is a part of IPC. In POSIX message
111 queues every message has a priority which decides about succession
112 of receiving it by a process. If you want to compile and run
113 programs written e.g. for Solaris with use of its POSIX message
114 queues (functions mq_*) say Y here. To use this feature you will
115 also need mqueue library, available from
116 <http://www.mat.uni.torun.pl/~wrona/posix_ipc/>
117
118 POSIX message queues are visible as a filesystem called 'mqueue'
119 and can be mounted somewhere if you want to do filesystem
120 operations on message queues.
121
122 If unsure, say Y.
123
124config BSD_PROCESS_ACCT
125 bool "BSD Process Accounting"
126 help
127 If you say Y here, a user level program will be able to instruct the
128 kernel (via a special system call) to write process accounting
129 information to a file: whenever a process exits, information about
130 that process will be appended to the file by the kernel. The
131 information includes things such as creation time, owning user,
132 command name, memory usage, controlling terminal etc. (the complete
133 list is in the struct acct in <file:include/linux/acct.h>). It is
134 up to the user level program to do useful things with this
135 information. This is generally a good idea, so say Y.
136
137config BSD_PROCESS_ACCT_V3
138 bool "BSD Process Accounting version 3 file format"
139 depends on BSD_PROCESS_ACCT
140 default n
141 help
142 If you say Y here, the process accounting information is written
143 in a new file format that also logs the process IDs of each
144 process and it's parent. Note that this file format is incompatible
145 with previous v0/v1/v2 file formats, so you will need updated tools
146 for processing it. A preliminary version of these tools is available
147 at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
148
149config SYSCTL
150 bool "Sysctl support"
151 ---help---
152 The sysctl interface provides a means of dynamically changing
153 certain kernel parameters and variables on the fly without requiring
154 a recompile of the kernel or reboot of the system. The primary
155 interface consists of a system call, but if you say Y to "/proc
156 file system support", a tree of modifiable sysctl entries will be
157 generated beneath the /proc/sys directory. They are explained in the
158 files in <file:Documentation/sysctl/>. Note that enabling this
159 option will enlarge the kernel by at least 8 KB.
160
161 As it is generally a good thing, you should say Y here unless
162 building a kernel for install/rescue disks or your system is very
163 limited in memory.
164
165config AUDIT
166 bool "Auditing support"
167 default y if SECURITY_SELINUX
168 help
169 Enable auditing infrastructure that can be used with another
170 kernel subsystem, such as SELinux (which requires this for
171 logging of avc messages output). Does not do system-call
172 auditing without CONFIG_AUDITSYSCALL.
173
174config AUDITSYSCALL
175 bool "Enable system-call auditing support"
176 depends on AUDIT && (X86 || PPC64 || ARCH_S390 || IA64)
177 default y if SECURITY_SELINUX
178 help
179 Enable low-overhead system-call auditing infrastructure that
180 can be used independently or with another kernel subsystem,
181 such as SELinux.
182
183config HOTPLUG
184 bool "Support for hot-pluggable devices" if !ARCH_S390
185 default ARCH_S390
186 help
187 This option is provided for the case where no in-kernel-tree
188 modules require HOTPLUG functionality, but a module built
189 outside the kernel tree does. Such modules require Y here.
190
191config KOBJECT_UEVENT
192 bool "Kernel Userspace Events"
193 depends on NET
194 default y
195 help
196 This option enables the kernel userspace event layer, which is a
197 simple mechanism for kernel-to-user communication over a netlink
198 socket.
199 The goal of the kernel userspace events layer is to provide a simple
200 and efficient events system, that notifies userspace about kobject
201 state changes. This will enable applications to just listen for
202 events instead of polling system devices and files.
203 Hotplug events (kobject addition and removal) are also available on
204 the netlink socket in addition to the execution of /sbin/hotplug if
205 CONFIG_HOTPLUG is enabled.
206
207 Say Y, unless you are building a system requiring minimal memory
208 consumption.
209
210config IKCONFIG
211 bool "Kernel .config support"
212 ---help---
213 This option enables the complete Linux kernel ".config" file
214 contents to be saved in the kernel. It provides documentation
215 of which kernel options are used in a running kernel or in an
216 on-disk kernel. This information can be extracted from the kernel
217 image file with the script scripts/extract-ikconfig and used as
218 input to rebuild the current kernel or to build another kernel.
219 It can also be extracted from a running kernel by reading
220 /proc/config.gz if enabled (below).
221
222config IKCONFIG_PROC
223 bool "Enable access to .config through /proc/config.gz"
224 depends on IKCONFIG && PROC_FS
225 ---help---
226 This option enables access to the kernel configuration file
227 through /proc/config.gz.
228
229config CPUSETS
230 bool "Cpuset support"
231 depends on SMP
232 help
233 This options will let you create and manage CPUSET's which
234 allow dynamically partitioning a system into sets of CPUs and
235 Memory Nodes and assigning tasks to run only within those sets.
236 This is primarily useful on large SMP or NUMA systems.
237
238 Say N if unsure.
239
240menuconfig EMBEDDED
241 bool "Configure standard kernel features (for small systems)"
242 help
243 This option allows certain base kernel options and settings
244 to be disabled or tweaked. This is for specialized
245 environments which can tolerate a "non-standard" kernel.
246 Only use this if you really know what you are doing.
247
248config KALLSYMS
249 bool "Load all symbols for debugging/kksymoops" if EMBEDDED
250 default y
251 help
252 Say Y here to let the kernel print out symbolic crash information and
253 symbolic stack backtraces. This increases the size of the kernel
254 somewhat, as all symbols have to be loaded into the kernel image.
255
256config KALLSYMS_ALL
257 bool "Include all symbols in kallsyms"
258 depends on DEBUG_KERNEL && KALLSYMS
259 help
260 Normally kallsyms only contains the symbols of functions, for nicer
261 OOPS messages. Some debuggers can use kallsyms for other
262 symbols too: say Y here to include all symbols, and you
263 don't care about adding 300k to the size of your kernel.
264
265 Say N.
266
267config KALLSYMS_EXTRA_PASS
268 bool "Do an extra kallsyms pass"
269 depends on KALLSYMS
270 help
271 If kallsyms is not working correctly, the build will fail with
272 inconsistent kallsyms data. If that occurs, log a bug report and
273 turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
274 Always say N here unless you find a bug in kallsyms, which must be
275 reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
276 you wait for kallsyms to be fixed.
277
278config BASE_FULL
279 default y
280 bool "Enable full-sized data structures for core" if EMBEDDED
281 help
282 Disabling this option reduces the size of miscellaneous core
283 kernel data structures. This saves memory on small machines,
284 but may reduce performance.
285
286config FUTEX
287 bool "Enable futex support" if EMBEDDED
288 default y
289 help
290 Disabling this option will cause the kernel to be built without
291 support for "fast userspace mutexes". The resulting kernel may not
292 run glibc-based applications correctly.
293
294config EPOLL
295 bool "Enable eventpoll support" if EMBEDDED
296 default y
297 help
298 Disabling this option will cause the kernel to be built without
299 support for epoll family of system calls.
300
301config CC_OPTIMIZE_FOR_SIZE
302 bool "Optimize for size" if EMBEDDED
303 default y if ARM || H8300
304 help
305 Enabling this option will pass "-Os" instead of "-O2" to gcc
306 resulting in a smaller kernel.
307
308 WARNING: some versions of gcc may generate incorrect code with this
309 option. If problems are observed, a gcc upgrade may be needed.
310
311 If unsure, say N.
312
313config SHMEM
314 bool "Use full shmem filesystem" if EMBEDDED
315 default y
316 depends on MMU
317 help
318 The shmem is an internal filesystem used to manage shared memory.
319 It is backed by swap and manages resource limits. It is also exported
320 to userspace as tmpfs if TMPFS is enabled. Disabling this
321 option replaces shmem and tmpfs with the much simpler ramfs code,
322 which may be appropriate on small systems without swap.
323
324config CC_ALIGN_FUNCTIONS
325 int "Function alignment" if EMBEDDED
326 default 0
327 help
328 Align the start of functions to the next power-of-two greater than n,
329 skipping up to n bytes. For instance, 32 aligns functions
330 to the next 32-byte boundary, but 24 would align to the next
331 32-byte boundary only if this can be done by skipping 23 bytes or less.
332 Zero means use compiler's default.
333
334config CC_ALIGN_LABELS
335 int "Label alignment" if EMBEDDED
336 default 0
337 help
338 Align all branch targets to a power-of-two boundary, skipping
339 up to n bytes like ALIGN_FUNCTIONS. This option can easily
340 make code slower, because it must insert dummy operations for
341 when the branch target is reached in the usual flow of the code.
342 Zero means use compiler's default.
343
344config CC_ALIGN_LOOPS
345 int "Loop alignment" if EMBEDDED
346 default 0
347 help
348 Align loops to a power-of-two boundary, skipping up to n bytes.
349 Zero means use compiler's default.
350
351config CC_ALIGN_JUMPS
352 int "Jump alignment" if EMBEDDED
353 default 0
354 help
355 Align branch targets to a power-of-two boundary, for branch
356 targets where the targets can only be reached by jumping,
357 skipping up to n bytes like ALIGN_FUNCTIONS. In this case,
358 no dummy operations need be executed.
359 Zero means use compiler's default.
360
361endmenu # General setup
362
363config TINY_SHMEM
364 default !SHMEM
365 bool
366
367config BASE_SMALL
368 int
369 default 0 if BASE_FULL
370 default 1 if !BASE_FULL
371
372menu "Loadable module support"
373
374config MODULES
375 bool "Enable loadable module support"
376 help
377 Kernel modules are small pieces of compiled code which can
378 be inserted in the running kernel, rather than being
379 permanently built into the kernel. You use the "modprobe"
380 tool to add (and sometimes remove) them. If you say Y here,
381 many parts of the kernel can be built as modules (by
382 answering M instead of Y where indicated): this is most
383 useful for infrequently used options which are not required
384 for booting. For more information, see the man pages for
385 modprobe, lsmod, modinfo, insmod and rmmod.
386
387 If you say Y here, you will need to run "make
388 modules_install" to put the modules under /lib/modules/
389 where modprobe can find them (you may need to be root to do
390 this).
391
392 If unsure, say Y.
393
394config MODULE_UNLOAD
395 bool "Module unloading"
396 depends on MODULES
397 help
398 Without this option you will not be able to unload any
399 modules (note that some modules may not be unloadable
400 anyway), which makes your kernel slightly smaller and
401 simpler. If unsure, say Y.
402
403config MODULE_FORCE_UNLOAD
404 bool "Forced module unloading"
405 depends on MODULE_UNLOAD && EXPERIMENTAL
406 help
407 This option allows you to force a module to unload, even if the
408 kernel believes it is unsafe: the kernel will remove the module
409 without waiting for anyone to stop using it (using the -f option to
410 rmmod). This is mainly for kernel developers and desperate users.
411 If unsure, say N.
412
413config OBSOLETE_MODPARM
414 bool
415 default y
416 depends on MODULES
417 help
418 You need this option to use module parameters on modules which
419 have not been converted to the new module parameter system yet.
420 If unsure, say Y.
421
422config MODVERSIONS
423 bool "Module versioning support (EXPERIMENTAL)"
424 depends on MODULES && EXPERIMENTAL && !UML
425 help
426 Usually, you have to use modules compiled with your kernel.
427 Saying Y here makes it sometimes possible to use modules
428 compiled for different kernels, by adding enough information
429 to the modules to (hopefully) spot any changes which would
430 make them incompatible with the kernel you are running. If
431 unsure, say N.
432
433config MODULE_SRCVERSION_ALL
434 bool "Source checksum for all modules"
435 depends on MODULES
436 help
437 Modules which contain a MODULE_VERSION get an extra "srcversion"
438 field inserted into their modinfo section, which contains a
439 sum of the source files which made it. This helps maintainers
440 see exactly which source was used to build a module (since
441 others sometimes change the module source without updating
442 the version). With this option, such a "srcversion" field
443 will be created for all modules. If unsure, say N.
444
445config KMOD
446 bool "Automatic kernel module loading"
447 depends on MODULES
448 help
449 Normally when you have selected some parts of the kernel to
450 be created as kernel modules, you must load them (using the
451 "modprobe" command) before you can use them. If you say Y
452 here, some parts of the kernel will be able to load modules
453 automatically: when a part of the kernel needs a module, it
454 runs modprobe with the appropriate arguments, thereby
455 loading the module if it is available. If unsure, say Y.
456
457config STOP_MACHINE
458 bool
459 default y
460 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
461 help
462 Need stop_machine() primitive.
463endmenu