clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag

Dividers which have CLK_DIVIDER_ONE_BASED set have a redundant state,
being a divider value of zero. Some hardware implementations allow a
zero divider which simply doesn't alter the frequency. I.e. it acts like
a divide by one or bypassing the divider.
This flag is used to handle such HW in the clk-divider model.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

1 files changed, 7 insertions, 1 deletions

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index b1675074fe7c..9fdfae74d669 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -249,9 +249,14 @@ struct clk_div_table {
  * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
  *      register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
  *      the raw value read from the register, with the value of zero considered
- *      invalid
+ *      invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
  * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
  *      the hardware register
+ * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors.  For dividers which have
+ *      CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
+ *      Some hardware implementations gracefully handle this case and allow a
+ *      zero divisor by not modifying their input clock
+ *      (divide by one / bypass).
  */
 struct clk_divider {
         struct clk_hw   hw;
@@ -265,6 +270,7 @@ struct clk_divider {
 
 #define CLK_DIVIDER_ONE_BASED           BIT(0)
 #define CLK_DIVIDER_POWER_OF_TWO        BIT(1)
+#define CLK_DIVIDER_ALLOW_ZERO          BIT(2)
 
 extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,